Given that EXPORT_SYMTAB was removed long ago, remove the Makefile
references to it.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the driver is in mainline now we can remove such dependency.
WIRELESS_EXT is 22 now and it is always defined.
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix this build error when CONFIG_WIRELESS_EXT is not set
at76_usb.c:5322: error: 'struct net_device' has no member named 'wireless_data'
at76_usb.c:5325: error: 'struct net_device' has no member named 'wireless_handlers'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the driver is in mainline now we can remove such dependency.
WIRELESS_EXT is 22 now and it is always defined.
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch implements several improvements to the set_termios method
suggested by Alan Cox:
* Correct check for whether any changes are being requested.
* Inform callers that mark/space parity isn't supported by always
clearing the bit.
* Pass back the actual used baud rate in case it doesn't match what was
requested.
Remaining known issues are that IXANY flow control is not supported, but
we don't tell the caller that, and input and output XON/XOFF flow
control are either both on or both off, but we don't indicate that back
to the caller either.
Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch contains changes made in the course of successfully reading
data from the device. These consist of a number of corrections and
additions to debug messages, and a fix for incorrect calculation of the
number of characters in the device FIFO which affected the operation of
the write_room method.
The use of semaphores to control access to port settings is replaced by
the preferred use of mutexes as this is the only code that uses them.
Aug 18 17:09:32 [kernel] BUG: unable to handle kernel paging request at f82f122c
Aug 18 17:09:32 [kernel] IP: [<c11e1a63>] tty_port_close_start+0x8c/0x15e
Aug 18 17:09:32 [kernel] *pde = 00000000
Aug 18 17:09:32 [kernel] Modules linked in: snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nls_iso8859_1 cifs xt_limit xt_NFLOG nfnetlink_log nfnetlink xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables i915 fb drm i2c_algo_bit cfbcopyarea i2c_core video backlight output cfbimgblt cfbfillrect quatech_usb2(C) usbserial uhci_hcd ehci_hcd snd_intel8x0 snd_ac97_codec ac97_bus usbcore tg3 snd_pcm snd_timer libphy snd intel_agp psmouse evdev ohci1394 soundcore ide_cd_mod cdrom ieee1394 snd_page_alloc agpgart floppy
Aug 18 17:09:32 [kernel] Pid: 4192, comm: cat Tainted: G C (2.6.31-rc6-gkh #9) HP Compaq dc5100 MT(PW097ET)
Aug 18 17:09:32 [kernel] EIP: 0060:[<c11e1a63>] EFLAGS: 00010046 CPU: 0
Aug 18 17:09:32 [kernel] EIP is at tty_port_close_start+0x8c/0x15e
Aug 18 17:09:32 [kernel] EAX: 00000000 EBX: 00000246 ECX: ebacc380 EDX: 00000000
Aug 18 17:09:32 [kernel] ESI: f72f1204 EDI: e6073000 EBP: e60b3ce4 ESP: e60b3ccc
Aug 18 17:09:32 [kernel] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Aug 18 17:09:32 [kernel] bcc17886 e60b3d2c bcc17886 f72f1200 f72f1204 e6073000 e60b3d10 f8b01a67
Aug 18 17:09:32 [kernel] <0> 00000000 e60b3d10 c11d9343 e60730a0 ebacc380 bcc17886 e6073000 00000000
Aug 18 17:09:32 [kernel] <0> ebacc380 e60b3d90 c11da71c 00000000 f7802480 bcc17886 ebacc380 00000000
Aug 18 17:09:32 [kernel] [<f8b01a67>] ? serial_close+0x3c/0x9a [usbserial]
Aug 18 17:09:32 [kernel] [<c11d9343>] ? tty_fasync+0x63/0xe3
Aug 18 17:09:32 [kernel] [<c11da71c>] ? tty_release_dev+0x159/0x47d
Aug 18 17:09:32 [kernel] [<c11804c5>] ? prio_tree_remove+0x6c/0xc5
Aug 18 17:09:32 [kernel] [<c1081c5f>] ? put_object+0x46/0x5e
Aug 18 17:09:32 [kernel] [<c11daa59>] ? tty_release+0x19/0x35
Aug 18 17:09:32 [kernel] [<c1086836>] ? __fput+0xed/0x1e4
Aug 18 17:09:32 [kernel] [<c1086951>] ? fput+0x24/0x39
Aug 18 17:09:32 [kernel] [<c108375e>] ? filp_close+0x4c/0x7b
Aug 18 17:09:32 [kernel] [<c1028076>] ? put_files_struct+0xc3/0xd2
Aug 18 17:09:32 [kernel] [<c10280b1>] ? exit_files+0x2c/0x40
Aug 18 17:09:32 [kernel] [<c1028551>] ? do_exit+0xd0/0x5f5
Aug 18 17:09:32 [kernel] [<c1031751>] ? recalc_sigpending+0x1b/0x4b
Aug 18 17:09:32 [kernel] [<c1031b8b>] ? dequeue_signal+0x96/0x154
Aug 18 17:09:32 [kernel] [<c1028ab1>] ? do_group_exit+0x3b/0x77
Aug 18 17:09:32 [kernel] [<c1032ec3>] ? get_signal_to_deliver+0x140/0x31b
Aug 18 17:09:32 [kernel] [<c11d90af>] ? tty_put_char+0x43/0x4b
Aug 18 17:09:32 [kernel] [<c1002633>] ? do_notify_resume+0xae/0x7fb
Aug 18 17:09:32 [kernel] [<c11dabcd>] ? tty_read+0x8f/0xb5
Aug 18 17:09:32 [kernel] [<c11dd0be>] ? n_tty_read+0x0/0x5d2
Aug 18 17:09:32 [kernel] [<c1085560>] ? vfs_read+0xb4/0x178
Aug 18 17:09:32 [kernel] [<c11dab3e>] ? tty_read+0x0/0xb5
Aug 18 17:09:32 [kernel] [<c10856e4>] ? sys_read+0x52/0x8b
Aug 18 17:09:32 [kernel] [<c1002f6a>] ? work_notifysig+0x13/0x19
Aug 18 17:09:32 [kernel] ---[ end trace 16f434ec7e2925bc ]---
Aug 18 17:09:32 [kernel] Fixing recursive fault but reboot is needed!
My guess is that my driver is doing something "wrong" in terms of it's
interface to the higher level layers and so is causing the oops. Are
there any mechanisms to turn on more checking / debugging in the layers
above the usb-serial layer to try and catch the cause of the problem?
I've already got USB_DEBUG enabled, what others might be relevant
(presumably USB_SERIAL_DEBUG isn't)?
Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch imports the implementation of the break_ctl, throttle and
unthrottle methods from the vendor driver into the staging driver. This
compiles but is not yet tested.
Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch imports the implementation of the set_termios method from the
vendor driver into the staging driver. The common terminal setting
changes should be supported.
Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It seems I can't count.
Patch to fix chars_in_buffer() method (broken in vendor driver), and
subsequently simplify the close() method, making it somewhat less
broken. There is quite a bit more improvement to do on this method
though.
Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Patch to remove TIOCMGET and TIOCMSET from the driver ioctl method, as
they never get used (error in vendor driver).
Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The following patch re-writes the write_room method to work in the
obvious sort of way, so it keeps it's promises to the layers above.
Based on feedback from Alan Cox.
Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Part two of the driver implementation has finally got done. It
implements the rest of open and the callback for reads from the box. I
seem to have finally found a structure that can be made to work, with a
single set of URBs for bulk read and write for the whole device, which
are used by all the ports. I've rationalised a few things, but there
will still be a lot of clean-up needed.
This one definitely can panic the kernel when a port is opened for
reading, but I'm off on holiday so I thought I'd post where I have got
to so far. I haven't tried to debug why it panics with a null pointer
dereference yet.
Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The patch is of the "works as far as it goes" variety, in that the
module compiles and loads, the device nodes are registered and the unit
switched on, but nothing actually works. On the other hand, it doesn't
panic the kernel, as far as I know.
Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Convert prism2_usb firmware loading to load firmware in pre-compiled
binary 'ihex' format rather than ascii 'srec' format. This moves the
srec processing and sorting of records out of kernel space into a
pre-compiler. The driver now just works with the binary image, but
still does the 'pda plugging' of that image at runtime, as required
by the prism hardware.
Some Notes:
- The firmware is now expected to be in the same 'ihex' (.fw) format
used by other drivers.
- The now driver assumes the data records are already sorted into ascending
address order.
- Plug and crc records are still recognised by special address locations
as in original srec processing.
- The srec S7 start address record is assumed to have been converted
into a data record with another special address location (0xff400000),
with the original start address being stored as a 4 byte data word
(little endian).
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If `cmd->chanlist_len' is 0, then we write ppl[-1].
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
vfree() does it's own NULL checking,so no need for check before
calling it.
'pages' is local variable argment,so in v2, it is no need assignment
to NULL.
Signed-off-by: Figo.zhang <figo1802@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lindent changes to comdi driver in staging tree.
This patch is followed by the checkpatch.pl error fixes.
Did not make them part of this patch as the patch size is already huge.
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Apparently, the NULL test is not necessary at this point.
The semantic patch that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@
- T i = E->fld;
+ T i;
... when != E
when != i
if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the driver is in mainline now we can remove such dependency.
WIRELESS_EXT is 22 now and it is always defined.
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes a number of warnings in the otus driver.
Signed-off-by: D Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the driver is in mainline now we can remove such dependencies.
WIRELESS_EXT is 22 now.
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix this build error when CONFIG_WIRELESS_EXT is not set:
drivers/staging/vt6655/device_main.c:1153: error: 'struct net_device'
has no member named 'wireless_handlers'
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
vt6656: replace call to info with printk call.
Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
vt6656: use net_device_ops for management functions
Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add includes to drivers/staging/vt6656. These came from the includes directory
in the upstream source archive. Trailing whitespace was stripped. This is
GPL-licensed code.
Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add pristine upstream vt6656 driver sources to drivers/staging/vt6656. These
files were copied from the driver directory in the upstream source archive,
available here:
http://www.viaarena.com/Driver/VT6656_Linux_src_v1.19_12_x86.zip
After copying, trailing whitespace was stripped. This is GPL-licensed code.
Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the vendor driver for the Ralink RT3090 chipset.
It should be later cleaned and ported to use the existing rt2x00
infrastructure or just replaced by the proper version.
[ Unfortunately since it follows the same design/implementation like
rt{286,287,307}0 drivers (already present in the staging tree)
it is highly unlikely that it will see much love from the wireless
development community.. ]
However since the development of the cleaner/proper version can take
significant time lets give distros (i.e. openSUSE seems to already
have the package with the original vendor driver) and users "something"
to use in the meantime.
I forward ported it to 2.6.31-rc1, ported to the Linux build system
and did some initial cleanups. More fixes/cleanups to come later
(it seems that the driver can be made to share most of its code with
the other Ralink drivers already present in the staging tree).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
