Commit graph

111 commits

Author SHA1 Message Date
Dave Chinner
a44f13edf0 xfs: Reduce log force overhead for delayed logging
Delayed logging adds some serialisation to the log force process to
ensure that it does not deference a bad commit context structure
when determining if a CIL push is necessary or not. It does this by
grabing the CIL context lock exclusively, then dropping it before
pushing the CIL if necessary. This causes serialisation of all log
forces and pushes regardless of whether a force is necessary or not.
As a result fsync heavy workloads (like dbench) can be significantly
slower with delayed logging than without.

To avoid this penalty, copy the current sequence from the context to
the CIL structure when they are swapped. This allows us to do
unlocked checks on the current sequence without having to worry
about dereferencing context structures that may have already been
freed. Hence we can remove the CIL context locking in the forcing
code and only call into the push code if the current context matches
the sequence we need to force.

By passing the sequence into the push code, we can check the
sequence again once we have the CIL lock held exclusive and abort if
the sequence has already been pushed. This avoids a lock round-trip
and unnecessary CIL pushes when we have racing push calls.

The result is that the regression in dbench performance goes away -
this change improves dbench performance on a ramdisk from ~2100MB/s
to ~2500MB/s. This compares favourably to not using delayed logging
which retuns ~2500MB/s for the same workload.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-08-24 11:40:03 +10:00
Christoph Hellwig
73523a2ecf xfs: fix gcc 4.6 set but not read and unused statement warnings
[hch: dropped a few hunks that need structural changes instead]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2010-07-26 13:16:51 -05:00
Christoph Hellwig
651701d71d xfs: remove incorrect log write optimization
We do need a barrier for the first buffer of a split log write.
Otherwise we might incorrectly stamp the tail LSN into transactions
in the first part of the split write, or not flush data I/O before
updating the inode size.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-07-26 13:16:45 -05:00
Christoph Hellwig
9134c2332e xfs: remove the unused XFS_LOG_SLEEP and XFS_LOG_NOSLEEP flags
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-07-26 13:16:38 -05:00
Christoph Hellwig
4e0d5f926b xfs: fix the xfs_log_iovec i_addr type
By making this member a void pointer we can get rid of a lot of pointless
casts.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-07-26 13:16:36 -05:00
Christoph Hellwig
3400777ff0 xfs: remove unneeded #include statements
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-07-26 13:16:33 -05:00
Christoph Hellwig
288699feca xfs: drop dmapi hooks
Dmapi support was never merged upstream, but we still have a lot of hooks
bloating XFS for it, all over the fast pathes of the filesystem.

This patch drops over 700 lines of dmapi overhead.  If we'll ever get HSM
support in mainline at least the namespace events can be done much saner
in the VFS instead of the individual filesystem, so it's not like this
is much help for future work.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-07-26 13:16:33 -05:00
Dave Chinner
9da1ab181a xfs: forced unmounts need to push the CIL
If the filesystem is being shut down and the there is no log error,
the current code forces out the current log buffers. This code now needs
to push the CIL before it forces out the log buffers to acheive the same
result.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-24 10:38:14 -05:00
Dave Chinner
71e330b593 xfs: Introduce delayed logging core code
The delayed logging code only changes in-memory structures and as
such can be enabled and disabled with a mount option. Add the mount
option and emit a warning that this is an experimental feature that
should not be used in production yet.

We also need infrastructure to track committed items that have not
yet been written to the log. This is what the Committed Item List
(CIL) is for.

The log item also needs to be extended to track the current log
vector, the associated memory buffer and it's location in the Commit
Item List. Extend the log item and log vector structures to enable
this tracking.

To maintain the current log format for transactions with delayed
logging, we need to introduce a checkpoint transaction and a context
for tracking each checkpoint from initiation to transaction
completion.  This includes adding a log ticket for tracking space
log required/used by the context checkpoint.

To track all the changes we need an io vector array per log item,
rather than a single array for the entire transaction. Using the new
log vector structure for this requires two passes - the first to
allocate the log vector structures and chain them together, and the
second to fill them out.  This log vector chain can then be passed
to the CIL for formatting, pinning and insertion into the CIL.

Formatting of the log vector chain is relatively simple - it's just
a loop over the iovecs on each log vector, but it is made slightly
more complex because we re-write the iovec after the copy to point
back at the memory buffer we just copied into.

This code also needs to pin log items. If the log item is not
already tracked in this checkpoint context, then it needs to be
pinned. Otherwise it is already pinned and we don't need to pin it
again.

The only other complexity is calculating the amount of new log space
the formatting has consumed. This needs to be accounted to the
transaction in progress, and the accounting is made more complex
becase we need also to steal space from it for log metadata in the
checkpoint transaction. Calculate all this at insert time and update
all the tickets, counters, etc correctly.

Once we've formatted all the log items in the transaction, attach
the busy extents to the checkpoint context so the busy extents live
until checkpoint completion and can be processed at that point in
time. Transactions can then be freed at this point in time.

Now we need to issue checkpoints - we are tracking the amount of log space
used by the items in the CIL, so we can trigger background checkpoints when the
space usage gets to a certain threshold. Otherwise, checkpoints need ot be
triggered when a log synchronisation point is reached - a log force event.

Because the log write code already handles chained log vectors, writing the
transaction is trivial, too. Construct a transaction header, add it
to the head of the chain and write it into the log, then issue a
commit record write. Then we can release the checkpoint log ticket
and attach the context to the log buffer so it can be called during
Io completion to complete the checkpoint.

We also need to allow for synchronising multiple in-flight
checkpoints. This is needed for two things - the first is to ensure
that checkpoint commit records appear in the log in the correct
sequence order (so they are replayed in the correct order). The
second is so that xfs_log_force_lsn() operates correctly and only
flushes and/or waits for the specific sequence it was provided with.

To do this we need a wait variable and a list tracking the
checkpoint commits in progress. We can walk this list and wait for
the checkpoints to change state or complete easily, an this provides
the necessary synchronisation for correct operation in both cases.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-24 10:38:03 -05:00
Dave Chinner
955833cf2a xfs: make the log ticket ID available outside the log infrastructure
The ticket ID is needed to uniquely identify transactions when doing busy
extent matching. Delayed logging changes the lifecycle of busy extents with
respect to the transaction structure lifecycle. Hence we can no longer use
the transaction structure as a means of determining the owner of the busy
extent as it may be freed and reused while the busy extent is still active.

This commit provides the infrastructure to access the xlog_tid_t held in the
ticket from a transaction handle. This avoids the need for callers to peek
into the transaction and log structures to find this out.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-24 10:33:52 -05:00
Dave Chinner
169a7b078e xfs: clean up log ticket overrun debug output
Push the error message output when a ticket overrun is detected
into the ticket printing functions. Also remove the debug version
of the code as the production version will still panic just as
effectively on a debug kernel via the panic mask being set.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-24 10:33:46 -05:00
Dave Chinner
3383ca5780 xfs: allow log ticket allocation to take allocation flags
Delayed logging currently requires ticket allocation to succeed, so
we need to be able to sleep on allocation. It also should not allow
memory allocation to recurse into the filesystem. hence we need to
pass allocation flags directing the type of allocation the caller
requires.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-24 10:33:17 -05:00
Dave Chinner
524ee36fa4 xfs: Don't reuse the same transaction ID for duplicated transactions.
The transaction ID is written into the log as the unique identifier
for transactions during recover. When duplicating a transaction, we
reuse the log ticket, which means it has the same transaction ID as
the previous transaction.

Rather than regenerating a random transaction ID for the duplicated
transaction, just add one to the current ID so that duplicated
transaction can be easily spotted in the log and during recovery
during problem diagnosis.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-24 10:33:10 -05:00
Alex Elder
48389ef175 xfs: kill off l_sectbb_mask
There remains only one user of the l_sectbb_mask field in the log
structure.  Just kill it off and compute the mask where needed from
the power-of-2 sector size.

(Only update from last post is to accomodate the changes in the
previous patch in the series.)

Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:16 -05:00
Alex Elder
69ce58f08a xfs: record log sector size rather than log2(that)
Change struct log so it keeps track of the size (in basic blocks) of
a log sector in l_sectBBsize rather than the log-base-2 of that
value (previously, l_sectbb_log).  The name was chosen for
consistency with the other fields in the structure that represent
a number of basic blocks.

(Updated so that a variable used in computing and verifying a log's
sector size is named "log2_size".  Also added the "BB" to the
structure field name, based on feedback from Eric Sandeen.  Also
dropped some superfluous parentheses.)

Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2010-05-19 09:58:15 -05:00
Dave Chinner
f983710758 xfs: make the log ticket transaction id random
The transaction ID that is written to the log for a transaction is
currently set by taking the lower 32 bits of the memory address of
the ticket structure.  This is not guaranteed to be unique as
tickets comes from a slab and slots can be reallocated immediately
after being freed. As a result, there is no guarantee of uniqueness
in the ticket ID value.

Fix this by assigning a random number to the ticket ID field so that
it is extremely unlikely that duplicates will occur and remove the
possibility of transactions being mixed up during recovery due to
duplicate IDs.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:13 -05:00
Christoph Hellwig
e6b1f27370 xfs: clean up xlog_write_adv_cnt
Replace the awkward xlog_write_adv_cnt with an inline helper that makes
it more obvious that it's modifying it's paramters, and replace the use
of an integer type for "ptr" with a real void pointer.  Also move
xlog_write_adv_cnt to xfs_log_priv.h as it will be used outside of
xfs_log.c in the delayed logging series.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-05-19 09:58:10 -05:00
Dave Chinner
55b66332d0 xfs: introduce new internal log vector structure
The current log IO vector structure is a flat array and not
extensible. To make it possible to keep separate log IO vectors for
individual log items, we need a method of chaining log IO vectors
together.

Introduce a new log vector type that can be used to wrap the
existing log IO vectors on use that internally to the log. This
means that the existing external interface (xfs_log_write) does not
change and hence no changes to the transaction commit code are
required.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-05-19 09:58:10 -05:00
Christoph Hellwig
99428ad0f6 xfs: reindent xlog_write
Reindent xlog_write to normal one tab indents and move all variable
declarations into the closest enclosing block.

Split from a bigger patch by Dave Chinner.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-05-19 09:58:10 -05:00
Dave Chinner
b5203cd0a4 xfs: factor xlog_write
xlog_write is a mess that takes a lot of effort to understand. It is
a mass of nested loops with 4 space indents to get it to fit in 80 columns
and lots of funky variables that aren't obvious what they mean or do.

Break it down into understandable chunks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-05-19 09:58:09 -05:00
Dave Chinner
9b9fc2b760 xfs: log ticket reservation underestimates the number of iclogs
When allocation a ticket for a transaction, the ticket is initialised with the
worst case log space usage based on the number of bytes the transaction may
consume. Part of this calculation is the number of log headers required for the
iclog space used up by the transaction.

This calculation makes an undocumented assumption that if the transaction uses
the log header space reservation on an iclog, then it consumes either the
entire iclog or it completes. That is - the transaction that is first in an
iclog is the transaction that the log header reservation is accounted to. If
the transaction is larger than the iclog, then it will use the entire iclog
itself. Document this assumption.

Further, the current calculation uses the rule that we can fit iclog_size bytes
of transaction data into an iclog. This is in correct - the amount of space
available in an iclog for transaction data is the size of the iclog minus the
space used for log record headers. This means that the calculation is out by
512 bytes per 32k of log space the transaction can consume. This is rarely an
issue because maximally sized transactions are extremely uncommon, and for 4k
block size filesystems maximal transaction reservations are about 400kb. Hence
the error in this case is less than the size of an iclog, so that makes it even
harder to hit.

However, anyone using larger directory blocks (16k directory blocks push the
maximum transaction size to approx. 900k on a 4k block size filesystem) or
larger block size (e.g. 64k blocks push transactions to the 3-4MB size) could
see the error grow to more than an iclog and at this point the transaction is
guaranteed to get a reservation underrun and shutdown the filesystem.

Fix this by adjusting the calculation to calculate the correct number of iclogs
required and account for them all up front.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:09 -05:00
Dave Chinner
43f5efc5b5 xfs: factor log item initialisation
Each log item type does manual initialisation of the log item.
Delayed logging introduces new fields that need initialisation, so
factor all the open coded initialisation into a common function
first.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-05-19 09:58:07 -05:00
Dave Chinner
b6f8dd49db xfs: ensure that sync updates the log tail correctly
Updates to the VFS layer removed an extra ->sync_fs call into the
filesystem during the sync process (from the quota code).
Unfortunately the sync code was unknowingly relying on this call to
make sure metadata buffers were flushed via a xfs_buftarg_flush()
call to move the tail of the log forward in memory before the final
transactions of the sync process were issued.

As a result, the old code would write a very recent log tail value
to the log by the end of the sync process, and so a subsequent crash
would leave nothing for log recovery to do. Hence in qa test 182,
log recovery only replayed a small handle for inode fsync
transactions in this case.

However, with the removal of the extra ->sync_fs call, the log tail
was now not moved forward with the inode fsync transactions near the
end of the sync procese the first (and only) buftarg flush occurred
after these transactions went to disk. The result is that log
recovery now sees a large number of transactions for metadata that
is already on disk.

This usually isn't a problem, but when the transactions include
inode chunk allocation, the inode create transactions and all
subsequent changes are replayed as we cannt rely on what is on disk
is valid. As a result, if the inode was written and contains
unlogged changes, the unlogged changes are lost, thereby violating
sync semantics.

The fix is to always issue a transaction after the buftarg flush
occurs is the log iѕ not idle or covered. This results in a dummy
transaction being written that contains the up-to-date log tail
value, which will be very recent. Indeed, it will be at least as
recent as the old code would have left on disk, so log recovery
will behave exactly as it used to in this situation.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-04-16 13:51:23 -05:00
Christoph Hellwig
35a8a72f06 xfs: stop passing opaque handles to xfs_log.c routines
Currenly we pass opaque xfs_log_ticket_t handles instead of
struct xlog_ticket pointers, and void pointers instead of
struct xlog_in_core pointers to various log manager functions.
Instead pass properly typed pointers after adding forward
declarations for them to xfs_log.h, and adjust the touched
function prototypes to the standard XFS style while at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-03-01 16:35:32 -06:00
Christoph Hellwig
a14a348bff xfs: cleanup up xfs_log_force calling conventions
Remove the XFS_LOG_FORCE argument which was always set, and the
XFS_LOG_URGE define, which was never used.

Split xfs_log_force into a two helpers - xfs_log_force which forces
the whole log, and xfs_log_force_lsn which forces up to the
specified LSN.  The underlying implementations already were entirely
separate, as were the users.

Also re-indent the new _xfs_log_force/_xfs_log_force which
previously had a weird coding style.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-21 13:44:49 -06:00
Christoph Hellwig
4139b3b337 xfs: kill XLOG_VEC_SET_TYPE
This macro only obsfucates the log item type assignments, so kill it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-21 13:44:43 -06:00
Christoph Hellwig
873ff5501d xfs: clean up log buffer writes
Don't bother using XFS_bwrite as it doesn't provide much code for
our use case.  Instead opencode it and fold xlog_bdstrat_cb into the
new xlog_bdstrat helper.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-15 15:34:54 -06:00
Dave Chinner
2ee1abad73 xfs: improve metadata I/O merging in the elevator
Change all async metadata buffers to use [READ|WRITE]_META I/O types
so that the I/O doesn't get issued immediately. This allows merging of
adjacent metadata requests but still prioritises them over bulk data.
This shows a 10-15% improvement in sequential create speed of small
files.

Don't include the log buffers in this classification - leave them as
sync types so they are issued immediately.

Signed-off-by: Dave Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-16 13:41:19 -06:00
Christoph Hellwig
0b1b213fcf xfs: event tracing support
Convert the old xfs tracing support that could only be used with the
out of tree kdb and xfsidbg patches to use the generic event tracer.

To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
all xfs trace channels by:

   echo 1 > /sys/kernel/debug/tracing/events/xfs/enable

or alternatively enable single events by just doing the same in one
event subdirectory, e.g.

   echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable

or set more complex filters, etc. In Documentation/trace/events.txt
all this is desctribed in more detail.  To reads the events do a

   cat /sys/kernel/debug/tracing/trace

Compared to the last posting this patch converts the tracing mostly to
the one tracepoint per callsite model that other users of the new
tracing facility also employ.  This allows a very fine-grained control
of the tracing, a cleaner output of the traces and also enables the
perf tool to use each tracepoint as a virtual performance counter,
     allowing us to e.g. count how often certain workloads git various
     spots in XFS.  Take a look at

    http://lwn.net/Articles/346470/

for some examples.

Also the btree tracing isn't included at all yet, as it will require
additional core tracing features not in mainline yet, I plan to
deliver it later.

And the really nice thing about this patch is that it actually removes
many lines of code while adding this nice functionality:

 fs/xfs/Makefile                |    8
 fs/xfs/linux-2.6/xfs_acl.c     |    1
 fs/xfs/linux-2.6/xfs_aops.c    |   52 -
 fs/xfs/linux-2.6/xfs_aops.h    |    2
 fs/xfs/linux-2.6/xfs_buf.c     |  117 +--
 fs/xfs/linux-2.6/xfs_buf.h     |   33
 fs/xfs/linux-2.6/xfs_fs_subr.c |    3
 fs/xfs/linux-2.6/xfs_ioctl.c   |    1
 fs/xfs/linux-2.6/xfs_ioctl32.c |    1
 fs/xfs/linux-2.6/xfs_iops.c    |    1
 fs/xfs/linux-2.6/xfs_linux.h   |    1
 fs/xfs/linux-2.6/xfs_lrw.c     |   87 --
 fs/xfs/linux-2.6/xfs_lrw.h     |   45 -
 fs/xfs/linux-2.6/xfs_super.c   |  104 ---
 fs/xfs/linux-2.6/xfs_super.h   |    7
 fs/xfs/linux-2.6/xfs_sync.c    |    1
 fs/xfs/linux-2.6/xfs_trace.c   |   75 ++
 fs/xfs/linux-2.6/xfs_trace.h   | 1369 +++++++++++++++++++++++++++++++++++++++++
 fs/xfs/linux-2.6/xfs_vnode.h   |    4
 fs/xfs/quota/xfs_dquot.c       |  110 ---
 fs/xfs/quota/xfs_dquot.h       |   21
 fs/xfs/quota/xfs_qm.c          |   40 -
 fs/xfs/quota/xfs_qm_syscalls.c |    4
 fs/xfs/support/ktrace.c        |  323 ---------
 fs/xfs/support/ktrace.h        |   85 --
 fs/xfs/xfs.h                   |   16
 fs/xfs/xfs_ag.h                |   14
 fs/xfs/xfs_alloc.c             |  230 +-----
 fs/xfs/xfs_alloc.h             |   27
 fs/xfs/xfs_alloc_btree.c       |    1
 fs/xfs/xfs_attr.c              |  107 ---
 fs/xfs/xfs_attr.h              |   10
 fs/xfs/xfs_attr_leaf.c         |   14
 fs/xfs/xfs_attr_sf.h           |   40 -
 fs/xfs/xfs_bmap.c              |  507 +++------------
 fs/xfs/xfs_bmap.h              |   49 -
 fs/xfs/xfs_bmap_btree.c        |    6
 fs/xfs/xfs_btree.c             |    5
 fs/xfs/xfs_btree_trace.h       |   17
 fs/xfs/xfs_buf_item.c          |   87 --
 fs/xfs/xfs_buf_item.h          |   20
 fs/xfs/xfs_da_btree.c          |    3
 fs/xfs/xfs_da_btree.h          |    7
 fs/xfs/xfs_dfrag.c             |    2
 fs/xfs/xfs_dir2.c              |    8
 fs/xfs/xfs_dir2_block.c        |   20
 fs/xfs/xfs_dir2_leaf.c         |   21
 fs/xfs/xfs_dir2_node.c         |   27
 fs/xfs/xfs_dir2_sf.c           |   26
 fs/xfs/xfs_dir2_trace.c        |  216 ------
 fs/xfs/xfs_dir2_trace.h        |   72 --
 fs/xfs/xfs_filestream.c        |    8
 fs/xfs/xfs_fsops.c             |    2
 fs/xfs/xfs_iget.c              |  111 ---
 fs/xfs/xfs_inode.c             |   67 --
 fs/xfs/xfs_inode.h             |   76 --
 fs/xfs/xfs_inode_item.c        |    5
 fs/xfs/xfs_iomap.c             |   85 --
 fs/xfs/xfs_iomap.h             |    8
 fs/xfs/xfs_log.c               |  181 +----
 fs/xfs/xfs_log_priv.h          |   20
 fs/xfs/xfs_log_recover.c       |    1
 fs/xfs/xfs_mount.c             |    2
 fs/xfs/xfs_quota.h             |    8
 fs/xfs/xfs_rename.c            |    1
 fs/xfs/xfs_rtalloc.c           |    1
 fs/xfs/xfs_rw.c                |    3
 fs/xfs/xfs_trans.h             |   47 +
 fs/xfs/xfs_trans_buf.c         |   62 -
 fs/xfs/xfs_vnodeops.c          |    8
 70 files changed, 2151 insertions(+), 2592 deletions(-)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14 23:08:16 -06:00
Christoph Hellwig
a8914f3a6d xfs: fix spin_is_locked assert on uni-processor builds
Without SMP or preemption spin_is_locked always returns false,
so we can't do an assert with it.  Instead use assert_spin_locked,
which does the right thing on all builds.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reported-by: Johannes Engel <jcnengel@googlemail.com>
Tested-by: Johannes Engel <jcnengel@googlemail.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-08-12 01:08:27 -05:00
Dave Chinner
9d7fef74b2 xfs: inform the xfsaild of the push target before sleeping
When trying to reserve log space, we find the amount of space
we need, then go to sleep waiting for space. When we are
woken, we try to push the tail of the log forward to make
sure we have space available.

Unfortunately, this means that if there is not space available, and
everyone who needs space goes to sleep there is no-one left to push
the tail of the log to make space available. Once we have a thread
waiting for space to become available, the others queue up behind
it in a FIFO, and none of them push the tail of the log.

This can result in everyone going to sleep in xlog_grant_log_space()
if the first sleeper races with the last I/O that moves the tail
of the log forward. With no further I/O tomove the tail of the log,
there is nothing to wake the sleepers and hence all transactions
just stop.

Fix this by making sure the xfsaild will create enough space for the
transaction that is about to sleep by moving the push target far
enough forwards to ensure that that the curent proceeees will have
enough space available when it is woken. That is, we push the
AIL before we go to sleep.

Because we've inserted the log ticket into the queue before we've
pushed and gone to sleep, subsequent transactions will wait behind
this one. Hence we are guaranteed to have space available when we
are woken.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2009-04-06 18:42:59 +02:00
Dave Chinner
a6cb767e24 xfs: validate log feature fields correctly
If the large log sector size feature bit is set in the
superblock by accident (say disk corruption), the then
fields that are now considered valid are not checked on
production kernels. The checks are present as ASSERT
statements so cause a panic on a debug kernel.

Change this so that the fields are validity checked if
the feature bit is set and abort the log mount if the
fields do not contain valid values.

Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2009-04-06 18:39:27 +02:00
Malcolm Parsons
9da096fd13 xfs: fix various typos
Signed-off-by: Malcolm Parsons <malcolm.parsons@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2009-03-29 09:55:42 +02:00
Christoph Hellwig
21b699c895 xfs: cleanup log unmount handling
Kill the current xfs_log_unmount wrapper and opencode the two function
calls in the only caller.  Rename the current xfs_log_unmount_dealloc to
xfs_log_unmount as it undoes xfs_log_mount and the new name makes that
more clear.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-03-16 08:19:29 +01:00
Christoph Hellwig
264307520b xfs: fix error handling in xfs_log_mount
We can't just call xfs_log_unmount_dealloc on any failure because the
ail thread which is torn down by xfs_log_unmount_dealloc might not
be initialized yet.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Reported-by: Lachlan McIlroy <lachlan@sgi.com>
2009-02-12 19:55:48 +01:00
Christoph Hellwig
7153f8ba2b xfs: remove iclog calculation special cases
Our default has been to always use 8 32KB log buffers for a while now, so
remove the special casing for larger block size filesystem to use the same
or even lower number of buffers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-02-09 08:36:46 +01:00
Christoph Hellwig
39e2defe73 reduce l_icloglock roundtrips
All but one caller of xlog_state_want_sync drop and re-acquire
l_icloglock around the call to it, just so that xlog_state_want_sync can
acquire and drop it.

Move all lock operation out of l_icloglock and assert that the lock is
held when it is called.

Note that it would make sense to extende this scheme to
xlog_state_release_iclog, but the locking in there is more complicated
and we'd like to keep the atomic_dec_and_lock optmization for those
callers not having l_icloglock yet.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-04 15:39:21 +11:00
Christoph Hellwig
b28708d6a0 [XFS] sanitize xlog_in_core_t definition
Move all fields from xlog_iclog_fields_t into xlog_in_core_t instead of having
them in a substructure and the using #defines to make it look like they were
directly in xlog_in_core_t.  Also document that xlog_in_core_2_t is grossly
misnamed, and make all references to it typesafe.

(First sent on Semptember 15th)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-01 11:37:25 +11:00
Christoph Hellwig
bac8dca9f9 [XFS] fix NULL pointer dereference in xfs_log_force_umount
xfs_log_force_umount may be called very early during log recovery where

If we fail a buffer read in xlog_recover_do_inode_trans we abort the mount.
But at that point log recovery has started delayed writeback of inode
buffers.   As part of the aborted mount we try to flush out all delwri
buffers, but at that point we have already freed the superblock, and set
mp->m_sb_bp to NULL, and xfs_log_force_umount which gets called after
the inode buffer writeback trips over it.

Make xfs_log_force_umount a little more careful when accessing mp->m_sb_bp
to avoid this.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-01 11:06:44 +11:00
Dave Chinner
cc09c0dc57 [XFS] Fix double free of log tickets
When an I/O error occurs during an intermediate commit on a rolling
transaction, xfs_trans_commit() will free the transaction structure
and the related ticket. However, the duplicate transaction that
gets used as the transaction continues still contains a pointer
to the ticket. Hence when the duplicate transaction is cancelled
and freed, we free the ticket a second time.

Add reference counting to the ticket so that we hold an extra
reference to the ticket over the transaction commit. We drop the
extra reference once we have checked that the transaction commit
did not return an error, thus avoiding a double free on commit
error.

Credit to Nick Piggin for tripping over the problem.

SGI-PV: 989741

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-11-17 17:37:10 +11:00
Dave Chinner
644c3567d1 [XFS] handle memory allocation failures during log initialisation
When there is no memory left in the system, xfs_buf_get_noaddr()
can fail. If this happens at mount time during xlog_alloc_log()
we fail to catch the error and oops.

Catch the error from xfs_buf_get_noaddr(), and allow other memory
allocations to fail and catch those errors too. Report the error
to the console and fail the mount with ENOMEM.

Tested by manually injecting errors into xfs_buf_get_noaddr() and
xlog_alloc_log().

Version 2:
o remove unnecessary casts of the returned pointer from kmem_zalloc()

SGI-PV: 987246

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-11-10 16:50:24 +11:00
David Chinner
783a2f656f [XFS] Finish removing the mount pointer from the AIL API
Change all the remaining AIL API functions that are passed struct
xfs_mount pointers to pass pointers directly to the struct xfs_ail being
used. With this conversion, all external access to the AIL is via the
struct xfs_ail. Hence the operation and referencing of the AIL is almost
entirely independent of the xfs_mount that is using it - it is now much
more tightly tied to the log and the items it is tracking in the log than
it is tied to the xfs_mount.

SGI-PV: 988143

SGI-Modid: xfs-linux-melb:xfs-kern:32353a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:39:58 +11:00
David Chinner
a9c21c1b9d [XFS] Given the log a pointer to the AIL
When we need to go from the log to the AIL, we have to go via the
xfs_mount. Add a xfs_ail pointer to the log so we can go directly to the
AIL associated with the log.

SGI-PV: 988143

SGI-Modid: xfs-linux-melb:xfs-kern:32351a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:39:35 +11:00
David Chinner
c7e8f26827 [XFS] Move the AIL lock into the struct xfs_ail
Bring the ail lock inside the struct xfs_ail. This means the AIL can be
entirely manipulated via the struct xfs_ail rather than needing both the
struct xfs_mount and the struct xfs_ail.

SGI-PV: 988143

SGI-Modid: xfs-linux-melb:xfs-kern:32350a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:39:23 +11:00
David Chinner
5b00f14fbd [XFS] move the AIl traversal over to a consistent interface
With the new cursor interface, it makes sense to make all the traversing
code use the cursor interface and make the old one go away. This means
more of the AIL interfacing is done by passing struct xfs_ail pointers
around the place instead of struct xfs_mount pointers.

We can replace the use of xfs_trans_first_ail() in xfs_log_need_covered()
as it is only checking if the AIL is empty. We can do that with a call to
xfs_trans_ail_tail() instead, where a zero LSN returned indicates and
empty AIL...

SGI-PV: 988143

SGI-Modid: xfs-linux-melb:xfs-kern:32348a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:39:00 +11:00
David Chinner
27d8d5fe0e [XFS] Use a cursor for AIL traversal.
To replace the current generation number ensuring sanity of the AIL
traversal, replace it with an external cursor that is linked to the AIL.

Basically, we store the next item in the cursor whenever we want to drop
the AIL lock to do something to the current item. When we regain the lock.
the current item may already be free, so we can't reference it, but the
next item in the traversal is already held in the cursor.

When we move or delete an object, we search all the active cursors and if
there is an item match we clear the cursor(s) that point to the object.
This forces the traversal to restart transparently.

We don't invalidate the cursor on insert because the cursor still points
to a valid item. If the intem is inserted between the current item and the
cursor it does not matter; the traversal is considered to be past the
insertion point so it will be picked up in the next traversal.

Hence traversal restarts pretty much disappear altogether with this method
of traversal, which should substantially reduce the overhead of pushing on
a busy AIL.

Version 2 o add restart logic o comment cursor interface o minor cleanups

SGI-PV: 988143

SGI-Modid: xfs-linux-melb:xfs-kern:32347a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:38:39 +11:00
Christoph Hellwig
73f6aa4d44 Fix barrier fail detection in XFS
Currently we disable barriers as soon as we get a buffer in xlog_iodone
that has the XBF_ORDERED flag cleared.  But this can be the case not only
for buffers where the barrier failed, but also the first buffer of a
split log write in case of a log wraparound.  Due to the disabled
barriers we can easily get directory corruption on unclean shutdowns.
So instead of using this check add a new buffer flag for failed barrier
writes.

This is a regression vs 2.6.26 caused by patch to use the right macro
to check for the ORDERED flag, as we previously got true returned for
every buffer.

Thanks to Toei Rei for reporting the bug.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: David Chinner <david@fromorbit.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-10 11:08:07 -07:00
David Chinner
b5b8c9acd5 [XFS] Fix barrier status change detection.
The current code in xlog_iodone() uses the wrong macro to check if the
barrier has been cleared due to an EOPNOTSUPP error form the lower layer.

SGI-PV: 986143

SGI-Modid: xfs-linux-melb:xfs-kern:31984a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Nathaniel W. Turner <nate@houseofnate.net>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-09-17 16:50:50 +10:00
Lachlan McIlroy
31bd61f2bb [XFS] Move memory allocations for log tracing out of the critical path
Memory allocations for log->l_grant_trace and iclog->ic_trace are done on
demand when the first event is logged. In xlog_state_get_iclog_space() we
call xlog_trace_iclog() under a spinlock and allocating memory here can
cause us to sleep with a spinlock held and deadlock the system.

For the log grant tracing we use KM_NOSLEEP but that means we can lose
trace entries. Since there is no locking to serialize the log grant
tracing we could race and have multiple allocations and leak memory.

So move the allocations to where we initialize the log/iclog structures.
Use KM_NOFS to avoid recursing into the filesystem and drop log->l_trace
since it's not even used.

SGI-PV: 983738

SGI-Modid: xfs-linux-melb:xfs-kern:31896a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-09-17 16:45:37 +10:00
Lachlan McIlroy
c6a7b0f8a4 [XFS] Fix use after free in xfs_log_done().
The ticket allocation code got reworked in 2.6.26 and we now free tickets
whereas before we used to cache them so the use-after-free went
undetected.

SGI-PV: 985525

SGI-Modid: xfs-linux-melb:xfs-kern:31877a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-08-13 16:52:50 +10:00