Commit graph

286624 commits

Author SHA1 Message Date
Eric Dumazet
747465ef7a net: fix some sparse errors
make C=2 CF="-D__CHECK_ENDIAN__" M=net

And fix flowi4_init_output() prototype for sport

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:31:12 -05:00
Shan Wei
2b2d465631 net: kill duplicate included header
For net part, remove duplicate included header.

Signed-off-by: Shan Wei <davidshan@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:31:12 -05:00
Nobuhiro Iwamatsu
34aa6f1400 net: sh-eth: Fix build error by the value which is not defined
-----
drivers/net/ethernet/renesas/sh_eth.c:1706: error: 'pdid' undeclared (first use in this function)
drivers/net/ethernet/renesas/sh_eth.c:1706: error: (Each undeclared identifier is reported only once
drivers/net/ethernet/renesas/sh_eth.c:1706: error: for each function it appears in.)
make[5]: *** [drivers/net/ethernet/renesas/sh_eth.o] Error 1
-----

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:31:12 -05:00
Ben Hutchings
e52ac3398c net: Use device model to get driver name in skb_gso_segment()
ethtool operations generally require the caller to hold RTNL and are
not safe to call in atomic context.  The device model provides this
information for most devices; we'll only lose it for some old ISA
drivers.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:31:12 -05:00
Eric Dumazet
27a429383b bridge: BH already disabled in br_fdb_cleanup()
br_fdb_cleanup() is run from timer interrupt, BH already masked.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Štefan Gula <steweg@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:17:32 -05:00
Glauber Costa
319d3b9c97 net: move sock_update_memcg outside of CONFIG_INET
Although only used currently for tcp sockets, this function
is now used in common sock code (for sock_clone())

Commit 475f1b5264 moved the
declaration of sock_update_clone() to inside sock.c, but
this only fixes the problem when CONFIG_CGROUP_MEM_RES_CTLR_KMEM
is also not defined.

This patch here is verified to fix both problems, although
reverting the previous one is not necessary.

Signed-off-by: Glauber Costa <glommer@parallels.com>
CC: David S. Miller <davem@davemloft.net>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:15:45 -05:00
Yogesh Ashok Powar
604c4ef1c4 mwl8k: Fixing Sparse ENDIAN CHECK warning
Fixing following sparse warning
>drivers/net/wireless/mwl8k.c:2780:15: warning: incorrect type in assignment (different base types)
>drivers/net/wireless/mwl8k.c:2780:15:    expected restricted unsigned short [usertype] channel
>drivers/net/wireless/mwl8k.c:2780:15:    got unsigned short [unsigned] [usertype] hw_value

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17 10:12:27 -05:00
Helmut Schaa
544204733a mac80211: Fix possible race between sta_unblock and network softirq
All other code paths in sta_unblock synchronize with the network
softirq by using local_bh_disable/enable. Do the same around
ieee80211_sta_ps_deliver_wakeup.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17 10:12:27 -05:00
Dan Carpenter
d981e05908 mwl8k: fix condition in mwl8k_cmd_encryption_remove_key()
The intent here was to check whether key->cipher was WEP40 or WEP104.
We do a similar check correctly in several other places in this file.
The current condition is always true.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17 10:12:26 -05:00
Alexandre Oliva
5addc0de28 brcmfmac: work-around gcc 4.7 build issue
Alexandre Oliva <oliva@lsd.ic.unicamp.br> says:

"It's an issue brought about by GCC 4.7's partial-inlining, that ends up
splitting the udelay function just at the wrong spot, in such a way that
some sanity checks for constants fails, and we end up calling
bad_udelay.

This patch fixes the problem.  Feel free to push it upstream if it makes
sense to you."

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17 10:12:19 -05:00
Devendra Naga
8d9d399f14 net: remove version.h includes in net/openvswitch/
remove version.h includes in net/openswitch/ as reported by make versioncheck.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:07:58 -05:00
Hiroaki SHIMODA
795d9a2538 bql: Fix inconsistency between file mode and attr method.
There is no store() method for inflight attribute in the
tx-<n>/byte_queue_limits sysfs directory.
So remove S_IWUSR bit.

Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:05:55 -05:00
Thadeu Lima de Souza Cascardo
1886e5d2c6 ehea: make some functions and variables static
Some functions and variables in ehea are only used in their own file, so
they should be static. One particular function had a very generic name,
print_error_data.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:04:43 -05:00
Linus Torvalds
7e9e7fa414 brcmsmac: remove PCI suspend/resume from bcma driver
The brcmsmac driver isn't a PCI driver any more, it's a bcma one.  The
PCI device has been resumed by the PCI driver (the generic PCI layer,
really), we should be resuming just our own driver state.

Also add pr_debug() calls to show that we now actually get the
suspend/resume events.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17 09:54:08 -05:00
Linus Torvalds
7d5869e78f bcma: connect the bcma bus suspend/resume to the bcma driver suspend/resume
Now the low-level driver actually gets informed that it is getting suspended and resumed.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17 09:54:08 -05:00
Linus Torvalds
685a4ef0df bcma: add stub for bcma_bus_suspend()
.. and connect it up with the pci host bcma driver.

Now, the next step is to connect those bcma bus-level suspend/resume
functions to the actual bcma device suspend resume functions.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17 09:54:05 -05:00
Linus Torvalds
5d2031f239 bcma: convert suspend/resume to pm_ops
.. and avoid doing the unnecessary PCI operations - the PCI layer will
do them for us.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17 09:54:04 -05:00
Mauro Carvalho Chehab
7bb0f088f8 [media] DocBook/dvbproperty.xml: Remove DTV_MODULATION from ISDB-T
On ISDB-T, each layer can have its own independent modulation,
applied to the carriers that belong to the segments associated
with them. So, there's no sense to define a global modulation
parameter.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-17 10:00:41 -02:00
Mauro Carvalho Chehab
b5dad9fdd8 [media] DocBook/dvbproperty.xml: Fix ISDB-T delivery system parameters
The ISDB-T differs on its way to implement the hierarchical
transmissions: instead of using a low-priority/high-priority
FEC codes, it does that by using different layers, each layer
with their groups of segments. So, those parameters don't make sense
for ISDB-T.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-17 09:49:28 -02:00
Mauro Carvalho Chehab
a34e2a784f [media] DocBook/dvbproperty.xml: Fix the units for DTV_FREQUENCY
The units for DTV_FREQUENCY are kHz for satellital delivery systems
(DVB-S/DVB-S2/DVB-TURBO/ISDB-S). Fix it at the API spec.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-17 09:45:48 -02:00
Thomas Renninger
3333ea7804 ACPI processor: Fix error path, also remove sysdev link
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 06:25:34 -05:00
Lin Ming
d640113fe8 ACPI: processor: fix acpi_get_cpuid for UP processor
For UP processor, it is likely that no _MAT method or MADT table defined.
So currently acpi_get_cpuid(...) always return -1 for UP processor.
This is wrong. It should return valid value for CPU0.

In the other hand, BIOS may define multiple CPU handles even for UP
processor, for example

        Scope (_PR)
        {
            Processor (CPU0, 0x00, 0x00000410, 0x06) {}
            Processor (CPU1, 0x01, 0x00000410, 0x06) {}
            Processor (CPU2, 0x02, 0x00000410, 0x06) {}
            Processor (CPU3, 0x03, 0x00000410, 0x06) {}
        }

We should only return valid value for CPU0's acpi handle.
And return invalid value for others.

http://marc.info/?t=132329819900003&r=1&w=2

Cc: stable@vger.kernel.org
Reported-and-tested-by: wallak@free.fr
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 05:25:08 -05:00
Shaohua Li
39a74fdedd intel_idle: fix API misuse
smp_call_function() only lets all other CPUs execute a specific function,
while we expect all CPUs do in intel_idle.  Without the fix, we could have
one cpu which has auto_demotion enabled or has no broadcast timer setup.
Usually we don't see impact because auto demotion just harms power and the
intel_idle init is called in CPU 0, where boradcast timer delivers
interrupt, but this still could be a problem.

Cc: stable@vger.kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 05:15:36 -05:00
Jozsef Kadlecsik
be94db9dda netfilter: ipset: dumping error triggered removing references twice
If there was a dumping error in the middle, the set-specific variable was
not zeroed out and thus the 'done' function of the dumping wrongly tried
to release the already released reference of the set. The already released
reference was caught by __ip_set_put and triggered a kernel BUG message.
Reported by Jean-Philippe Menil.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-01-17 10:52:55 +01:00
Jozsef Kadlecsik
088067f4f1 netfilter: ipset: autoload set type modules safely
Jan Engelhardt noticed when userspace requests a set type unknown
to the kernel, it can lead to a loop due to the unsafe type module
loading. The issue is fixed in this patch.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-01-17 10:52:46 +01:00
Randy Dunlap
5ee7153544 x86/kconfig: Move the ZONE_DMA entry under a menu
Move the ZONE_DMA kconfig symbol under a menu item instead
of having it listed before everything else in
"make {xconfig | gconfig | nconfig | menuconfig}".

This drops the first line of the top-level kernel config menu
(in 3.2) below and moves it under "Processor type and features".

          [*] DMA memory allocation support
              General setup  --->
          [*] Enable loadable module support  --->
          [*] Enable the block layer  --->
              Processor type and features  --->
              Power management and ACPI options  --->
              Bus options (PCI etc.)  --->
              Executable file formats / Emulations  --->

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/4F14811E.6090107@xenotime.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>
2012-01-17 10:41:36 +01:00
Myron Stowe
700130b41f ACPI APEI: Convert atomicio routines
APEI needs memory access in interrupt context.  The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap().  Therefore, we added
drivers/acpi/atomicio.c, which provides:
    acpi_pre_map_gar()     -- ioremap in process context
	acpi_atomic_read()     -- memory access in interrupt context
	acpi_post_unmap_gar()  -- iounmap

Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a).  Now this sequence:
    acpi_os_map_generic_address()    -- ioremap in process context
    acpi_read()/apei_read()          -- now OK in interrupt context
    acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.

This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write().  This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).

With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
    acpi_pre_map_gar()     -->  acpi_os_map_generic_address()
    acpi_post_unmap_gar()  -->  acpi_os_unmap_generic_address()
    acpi_atomic_read()     -->  apei_read()
    acpi_atomic_write()    -->  apei_write()

Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect.  'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus.  The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads.  I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 04:36:40 -05:00
Myron Stowe
6f68c91c55 ACPI: Export interfaces for ioremapping/iounmapping ACPI registers
Export remapping and unmapping interfaces - acpi_os_map_generic_address()
and acpi_os_unmap_generic_address() - for ACPI generic registers that are
backed by memory mapped I/O (MMIO).

The acpi_os_map_generic_address() and acpi_os_unmap_generic_address()
declarations may more properly belong in include/acpi/acpiosxf.h next to
acpi_os_read_memory() but I believe that would require the ACPI CA making
them an official part of the ACPI CA - OS interface.

ACPI Generic Address Structure (GAS) reference (ACPI's fixed/generic
hardware registers use the GAS format):
  ACPI Specification, Revision 4.0, Section 5.2.3.1, "Generic Address
  Structure"

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 04:35:20 -05:00
Myron Stowe
bc9ffce279 ACPI: Fix possible alignment issues with GAS 'address' references
Generic Address Structures (GAS) may reside within ACPI tables which
are byte aligned.  This patch copies GAS 'address' references to a local
variable, which will be naturally aligned, to be used going forward.

ACPI Generic Address Structure (GAS) reference:
  ACPI Specification, Revision 4.0, Section 5.2.3.1, "Generic Address
  Structure"

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 04:33:40 -05:00
Kurt Garloff
9f10f6a520 ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64)
In SRAT v1, we had 8bit proximity domain (PXM) fields; SRAT v2 provides
32bits for these. The new fields were reserved before.
According to the ACPI spec, the OS must disregrard reserved fields.

ia64 did handle the PXM fields almost consistently, but depending on
sgi's sn2 platform. This patch leaves the sn2 logic in, but does also
use 16/32 bits for PXM if the SRAT has rev 2 or higher.

The patch also adds __init to the two pxm accessor functions, as they
access __initdata now and are called from an __init function only anyway.

Note that the code only uses 16 bits for the PXM field in the processor
proximity field; the patch does not address this as 16 bits are more than
enough.

Signed-off-by: Kurt Garloff <kurt@garloff.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 04:21:49 -05:00
Kurt Garloff
cd298f60a2 ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64)
In SRAT v1, we had 8bit proximity domain (PXM) fields; SRAT v2 provides
32bits for these. The new fields were reserved before.
According to the ACPI spec, the OS must disregrard reserved fields.

x86/x86-64 was rather inconsistent prior to this patch; it used 8 bits
for the pxm field in cpu_affinity, but 32 bits in mem_affinity.
This patch makes it consistent: Either use 8 bits consistently (SRAT
rev 1 or lower) or 32 bits (SRAT rev 2 or higher).

cc: x86@kernel.org
Signed-off-by: Kurt Garloff <kurt@garloff.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 04:20:31 -05:00
Kurt Garloff
8df0eb7c9d ACPI: Store SRAT table revision
In SRAT v1, we had 8bit proximity domain (PXM) fields; SRAT v2 provides
32bits for these. The new fields were reserved before.
According to the ACPI spec, the OS must disregrard reserved fields.
In order to know whether or not, we must know what version the SRAT
table has.

This patch stores the SRAT table revision for later consumption
by arch specific __init functions.

Signed-off-by: Kurt Garloff <kurt@garloff.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 04:19:04 -05:00
Huang Ying
4134b8c881 ACPI, APEI, Resolve false conflict between ACPI NVS and APEI
Some firmware will access memory in ACPI NVS region via APEI.  That
is, instructions in APEI ERST/EINJ table will read/write ACPI NVS
region.  The original resource conflict checking in APEI code will
check memory/ioport accessed by APEI via general resource management
mech.  But ACPI NVS region is marked as busy already, so that the
false resource conflict will prevent APEI ERST/EINJ to work.

To fix this, this patch excludes ACPI NVS regions when APEI components
request resources.  So that they will not conflict with ACPI NVS
regions.

Reported-and-tested-by: Pavel Ivanov <paivanof@gmail.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:54:46 -05:00
Huang Ying
b54ac6d2a2 ACPI, Record ACPI NVS regions
Some firmware will access memory in ACPI NVS region via APEI.  That
is, instructions in APEI ERST/EINJ table will read/write ACPI NVS
region.  The original resource conflict checking in APEI code will
check memory/ioport accessed by APEI via general resource management
mechanism.  But ACPI NVS region is marked as busy already, so that the
false resource conflict will prevent APEI ERST/EINJ to work.

To fix this, this patch record ACPI NVS regions, so that we can avoid
request resources for memory region inside it.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:54:44 -05:00
Xiao, Hui
b4e008dc53 ACPI, APEI, EINJ, Refine the fix of resource conflict
Current fix for resource conflict is to remove the address region <param1 &
param2, ~param2+1> from trigger resource, which is highly relies on valid user
input. This patch is trying to avoid such potential issues by fetching the
exact address region from trigger action table entry.

Signed-off-by: Xiao, Hui <hui.xiao@linux.intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:54:41 -05:00
Huang Ying
fdea163d8c ACPI, APEI, EINJ, Fix resource conflict on some machine
Some APEI firmware implementation will access injected address
specified in param1 to trigger the error when injecting memory error.
This will cause resource conflict with RAM.

On one of our testing machine, if injecting at memory address
0x10000000, the following error will be reported in dmesg:

  APEI: Can not request iomem region <0000000010000000-0000000010000008> for GARs.

This patch removes the injecting memory address range from trigger
table resources to avoid conflict.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:54:38 -05:00
Huang Ying
76da3fb357 ACPI, Add RAM mapping support to ACPI atomic IO support
On one of our testing machine, the following EINJ command lines:

  # echo 0x10000000 > param1
  # echo 0xfffffffffffff000 > param2
  # echo 0x8 > error_type
  # echo 1 > error_inject

Will get:

  echo: write error: Input/output error

The EIO comes from:

    rc = apei_exec_pre_map_gars(&trigger_ctx);

The root cause is as follow.  Normally, ACPI atomic IO support is used
to access IO memory.  But in EINJ of that machine, it is used to
access RAM to trigger the injected error.  And the ioremap() called by
apei_exec_pre_map_gars() can not map the RAM.

This patch add RAM mapping support to ACPI atomic IO support to
satisfy EINJ requirement.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:54:34 -05:00
Huang Ying
46d12f0bcb ACPI, APEI, Printk queued error record before panic
Because printk is not safe inside NMI handler, the recoverable error
records received in NMI handler will be queued to be printked in a
delayed IRQ context via irq_work.  If a fatal error occurs after the
recoverable error and before the irq_work processed, we lost a error
report.

To solve the issue, the queued error records are printked in NMI
handler if system will go panic.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:54:33 -05:00
Huang Ying
5ba82ab534 ACPI, APEI, GHES, Distinguish interleaved error report in kernel log
In most cases, printk only guarantees messages from different printk
calling will not be interleaved between each other.  But, one APEI
GHES hardware error report will involve multiple printk calling,
normally each for one line.  So it is possible that the hardware error
report comes from different generic hardware error source will be
interleaved.

In this patch, a sequence number is prefixed to each line of error
report.  So that, even if they are interleaved, they still can be
distinguished by the prefixed sequence number.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:54:31 -05:00
Huang Ying
ad6861547b ACPI, APEI, Remove table not found message
Because APEI tables are optional, these message may confuse users, for
example,

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/599715

Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:54:29 -05:00
Bjorn Helgaas
46b91e379f ACPI, APEI, Print resource errors in conventional format
Use the normal %pR-like format for MMIO and I/O port ranges.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:54:26 -05:00
Huang Ying
a654e5ee4f ACPI, APEI, GHES: Add PCIe AER recovery support
aer_recover_queue() is called when recoverable PCIe AER errors are
notified by firmware to do the recovery work.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:54:21 -05:00
Huang Ying
04c25997c9 ACPI, Add 64bit read/write support to atomicio on i386
There is no 64bit read/write support in ACPI atomicio because
readq/writeq is used to implement 64bit read/write, but readq/writeq
is not available on i386.  This patch implement 64bit read/write
support in atomicio via two readl/writel.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:54:15 -05:00
Ingo Molnar
6eadf1075c Merge branch 'tip/perf/urgent-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/urgent 2012-01-17 09:51:46 +01:00
Bob Moore
5d1f865726 ACPICA: Update to version 20120111
Version 20120111.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:38:52 -05:00
Bob Moore
77848130e5 ACPICA: Update all copyrights to 2012
Update all copyrights to 2012.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:38:51 -05:00
Lin Ming
f654c0fefa ACPICA: Add support for region address conflict checking
Allows drivers to determine if any memory or I/O addresses
will conflict with addresses used by ACPI operation regions.
Introduces a new interface, acpi_check_address_range.

http://marc.info/?t=132251388700002&r=1&w=2

Reported-and-tested-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:38:50 -05:00
Bob Moore
ecafe6faa2 ACPICA: Update for larger ACPI 5 FADT size
FADT is now larger than 256 bytes, so all FADT offsets must be
changed from 8 bits to 16 bits.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:38:49 -05:00
Bob Moore
240c320c59 ACPICA: Update to version 20111123
This version contains full support for the ACPI 5.0 specification.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:36:33 -05:00
Lin Ming
5dc46c3f13 ACPICA: Clean up Makefile
Make the various files in alphabetical order to simplify
addition of new files.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:36:32 -05:00