linux/drivers/net/wireless/iwlwifi/iwl-4965.c

3899 lines
110 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* James P. Ketrenos <ipw2100-admin@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/version.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-helpers.h"
#include "iwl-calib.h"
/* module parameters */
static struct iwl_mod_params iwl4965_mod_params = {
.num_of_queues = IWL49_NUM_QUEUES,
.enable_qos = 1,
.amsdu_size_8K = 1,
.restart_fw = 1,
/* the rest are 0 by default */
};
#ifdef CONFIG_IWL4965_HT
static const u16 default_tid_to_tx_fifo[] = {
IWL_TX_FIFO_AC1,
IWL_TX_FIFO_AC0,
IWL_TX_FIFO_AC0,
IWL_TX_FIFO_AC1,
IWL_TX_FIFO_AC2,
IWL_TX_FIFO_AC2,
IWL_TX_FIFO_AC3,
IWL_TX_FIFO_AC3,
IWL_TX_FIFO_NONE,
IWL_TX_FIFO_NONE,
IWL_TX_FIFO_NONE,
IWL_TX_FIFO_NONE,
IWL_TX_FIFO_NONE,
IWL_TX_FIFO_NONE,
IWL_TX_FIFO_NONE,
IWL_TX_FIFO_NONE,
IWL_TX_FIFO_AC3
};
#endif /*CONFIG_IWL4965_HT */
/* check contents of special bootstrap uCode SRAM */
static int iwl4965_verify_bsm(struct iwl_priv *priv)
{
__le32 *image = priv->ucode_boot.v_addr;
u32 len = priv->ucode_boot.len;
u32 reg;
u32 val;
IWL_DEBUG_INFO("Begin verify bsm\n");
/* verify BSM SRAM contents */
val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
for (reg = BSM_SRAM_LOWER_BOUND;
reg < BSM_SRAM_LOWER_BOUND + len;
reg += sizeof(u32), image++) {
val = iwl_read_prph(priv, reg);
if (val != le32_to_cpu(*image)) {
IWL_ERROR("BSM uCode verification failed at "
"addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
BSM_SRAM_LOWER_BOUND,
reg - BSM_SRAM_LOWER_BOUND, len,
val, le32_to_cpu(*image));
return -EIO;
}
}
IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n");
return 0;
}
/**
* iwl4965_load_bsm - Load bootstrap instructions
*
* BSM operation:
*
* The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
* in special SRAM that does not power down during RFKILL. When powering back
* up after power-saving sleeps (or during initial uCode load), the BSM loads
* the bootstrap program into the on-board processor, and starts it.
*
* The bootstrap program loads (via DMA) instructions and data for a new
* program from host DRAM locations indicated by the host driver in the
* BSM_DRAM_* registers. Once the new program is loaded, it starts
* automatically.
*
* When initializing the NIC, the host driver points the BSM to the
* "initialize" uCode image. This uCode sets up some internal data, then
* notifies host via "initialize alive" that it is complete.
*
* The host then replaces the BSM_DRAM_* pointer values to point to the
* normal runtime uCode instructions and a backup uCode data cache buffer
* (filled initially with starting data values for the on-board processor),
* then triggers the "initialize" uCode to load and launch the runtime uCode,
* which begins normal operation.
*
* When doing a power-save shutdown, runtime uCode saves data SRAM into
* the backup data cache in DRAM before SRAM is powered down.
*
* When powering back up, the BSM loads the bootstrap program. This reloads
* the runtime uCode instructions and the backup data cache into SRAM,
* and re-launches the runtime uCode from where it left off.
*/
static int iwl4965_load_bsm(struct iwl_priv *priv)
{
__le32 *image = priv->ucode_boot.v_addr;
u32 len = priv->ucode_boot.len;
dma_addr_t pinst;
dma_addr_t pdata;
u32 inst_len;
u32 data_len;
int i;
u32 done;
u32 reg_offset;
int ret;
IWL_DEBUG_INFO("Begin load bsm\n");
/* make sure bootstrap program is no larger than BSM's SRAM size */
if (len > IWL_MAX_BSM_SIZE)
return -EINVAL;
/* Tell bootstrap uCode where to find the "Initialize" uCode
* in host DRAM ... host DRAM physical address bits 35:4 for 4965.
* NOTE: iwl4965_initialize_alive_start() will replace these values,
* after the "initialize" uCode has run, to point to
* runtime/protocol instructions and backup data cache. */
pinst = priv->ucode_init.p_addr >> 4;
pdata = priv->ucode_init_data.p_addr >> 4;
inst_len = priv->ucode_init.len;
data_len = priv->ucode_init_data.len;
ret = iwl_grab_nic_access(priv);
if (ret)
return ret;
iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
/* Fill BSM memory with bootstrap instructions */
for (reg_offset = BSM_SRAM_LOWER_BOUND;
reg_offset < BSM_SRAM_LOWER_BOUND + len;
reg_offset += sizeof(u32), image++)
_iwl_write_prph(priv, reg_offset, le32_to_cpu(*image));
ret = iwl4965_verify_bsm(priv);
if (ret) {
iwl_release_nic_access(priv);
return ret;
}
/* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
iwl_write_prph(priv, BSM_WR_MEM_DST_REG, RTC_INST_LOWER_BOUND);
iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
/* Load bootstrap code into instruction SRAM now,
* to prepare to load "initialize" uCode */
iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
/* Wait for load of bootstrap uCode to finish */
for (i = 0; i < 100; i++) {
done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
if (!(done & BSM_WR_CTRL_REG_BIT_START))
break;
udelay(10);
}
if (i < 100)
IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i);
else {
IWL_ERROR("BSM write did not complete!\n");
return -EIO;
}
/* Enable future boot loads whenever power management unit triggers it
* (e.g. when powering back up after power-save shutdown) */
iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
iwl_release_nic_access(priv);
return 0;
}
/**
* iwl4965_set_ucode_ptrs - Set uCode address location
*
* Tell initialization uCode where to find runtime uCode.
*
* BSM registers initially contain pointers to initialization uCode.
* We need to replace them to load runtime uCode inst and data,
* and to save runtime data when powering down.
*/
static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
{
dma_addr_t pinst;
dma_addr_t pdata;
unsigned long flags;
int ret = 0;
/* bits 35:4 for 4965 */
pinst = priv->ucode_code.p_addr >> 4;
pdata = priv->ucode_data_backup.p_addr >> 4;
spin_lock_irqsave(&priv->lock, flags);
ret = iwl_grab_nic_access(priv);
if (ret) {
spin_unlock_irqrestore(&priv->lock, flags);
return ret;
}
/* Tell bootstrap uCode where to find image to load */
iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
priv->ucode_data.len);
/* Inst bytecount must be last to set up, bit 31 signals uCode
* that all new ptr/size info is in place */
iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
priv->ucode_code.len | BSM_DRAM_INST_LOAD);
iwl_release_nic_access(priv);
spin_unlock_irqrestore(&priv->lock, flags);
IWL_DEBUG_INFO("Runtime uCode pointers are set.\n");
return ret;
}
/**
* iwl4965_init_alive_start - Called after REPLY_ALIVE notification received
*
* Called after REPLY_ALIVE notification received from "initialize" uCode.
*
* The 4965 "initialize" ALIVE reply contains calibration data for:
* Voltage, temperature, and MIMO tx gain correction, now stored in priv
* (3945 does not contain this data).
*
* Tell "initialize" uCode to go ahead and load the runtime uCode.
*/
static void iwl4965_init_alive_start(struct iwl_priv *priv)
{
/* Check alive response for "valid" sign from uCode */
if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
/* We had an error bringing up the hardware, so take it
* all the way back down so we can try again */
IWL_DEBUG_INFO("Initialize Alive failed.\n");
goto restart;
}
/* Bootstrap uCode has loaded initialize uCode ... verify inst image.
* This is a paranoid check, because we would not have gotten the
* "initialize" alive if code weren't properly loaded. */
if (iwl_verify_ucode(priv)) {
/* Runtime instruction load was bad;
* take it all the way back down so we can try again */
IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
goto restart;
}
/* Calculate temperature */
priv->temperature = iwl4965_get_temperature(priv);
/* Send pointers to protocol/runtime uCode image ... init code will
* load and launch runtime uCode, which will send us another "Alive"
* notification. */
IWL_DEBUG_INFO("Initialization Alive received.\n");
if (iwl4965_set_ucode_ptrs(priv)) {
/* Runtime instruction load won't happen;
* take it all the way back down so we can try again */
IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n");
goto restart;
}
return;
restart:
queue_work(priv->workqueue, &priv->restart);
}
static int is_fat_channel(__le32 rxon_flags)
{
return (rxon_flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) ||
(rxon_flags & RXON_FLG_CHANNEL_MODE_MIXED_MSK);
}
int iwl4965_hwrate_to_plcp_idx(u32 rate_n_flags)
{
int idx = 0;
/* 4965 HT rate format */
if (rate_n_flags & RATE_MCS_HT_MSK) {
idx = (rate_n_flags & 0xff);
if (idx >= IWL_RATE_MIMO2_6M_PLCP)
idx = idx - IWL_RATE_MIMO2_6M_PLCP;
idx += IWL_FIRST_OFDM_RATE;
/* skip 9M not supported in ht*/
if (idx >= IWL_RATE_9M_INDEX)
idx += 1;
if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE))
return idx;
/* 4965 legacy rate format, search for match in table */
} else {
for (idx = 0; idx < ARRAY_SIZE(iwl4965_rates); idx++)
if (iwl4965_rates[idx].plcp == (rate_n_flags & 0xFF))
return idx;
}
return -1;
}
/**
* translate ucode response to mac80211 tx status control values
*/
void iwl4965_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags,
struct ieee80211_tx_control *control)
{
int rate_index;
control->antenna_sel_tx =
((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS);
if (rate_n_flags & RATE_MCS_HT_MSK)
control->flags |= IEEE80211_TXCTL_OFDM_HT;
if (rate_n_flags & RATE_MCS_GF_MSK)
control->flags |= IEEE80211_TXCTL_GREEN_FIELD;
if (rate_n_flags & RATE_MCS_FAT_MSK)
control->flags |= IEEE80211_TXCTL_40_MHZ_WIDTH;
if (rate_n_flags & RATE_MCS_DUP_MSK)
control->flags |= IEEE80211_TXCTL_DUP_DATA;
if (rate_n_flags & RATE_MCS_SGI_MSK)
control->flags |= IEEE80211_TXCTL_SHORT_GI;
/* since iwl4965_hwrate_to_plcp_idx is band indifferent, we always use
* IEEE80211_BAND_2GHZ band as it contains all the rates */
rate_index = iwl4965_hwrate_to_plcp_idx(rate_n_flags);
if (rate_index == -1)
control->tx_rate = NULL;
else
control->tx_rate =
&priv->bands[IEEE80211_BAND_2GHZ].bitrates[rate_index];
}
int iwl4965_hw_rxq_stop(struct iwl_priv *priv)
{
int rc;
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
rc = iwl_grab_nic_access(priv);
if (rc) {
spin_unlock_irqrestore(&priv->lock, flags);
return rc;
}
/* stop Rx DMA */
iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
rc = iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG,
(1 << 24), 1000);
if (rc < 0)
IWL_ERROR("Can't stop Rx DMA.\n");
iwl_release_nic_access(priv);
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
/*
* EEPROM handlers
*/
static int iwl4965_eeprom_check_version(struct iwl_priv *priv)
{
u16 eeprom_ver;
u16 calib_ver;
eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
calib_ver = iwl_eeprom_query16(priv, EEPROM_4965_CALIB_VERSION_OFFSET);
if (eeprom_ver < EEPROM_4965_EEPROM_VERSION ||
calib_ver < EEPROM_4965_TX_POWER_VERSION)
goto err;
return 0;
err:
IWL_ERROR("Unsuported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
eeprom_ver, EEPROM_4965_EEPROM_VERSION,
calib_ver, EEPROM_4965_TX_POWER_VERSION);
return -EINVAL;
}
int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
{
int ret;
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
ret = iwl_grab_nic_access(priv);
if (ret) {
spin_unlock_irqrestore(&priv->lock, flags);
return ret;
}
if (src == IWL_PWR_SRC_VAUX) {
u32 val;
ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE,
&val);
if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) {
iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
~APMG_PS_CTRL_MSK_PWR_SRC);
}
} else {
iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
~APMG_PS_CTRL_MSK_PWR_SRC);
}
iwl_release_nic_access(priv);
spin_unlock_irqrestore(&priv->lock, flags);
return ret;
}
static int iwl4965_disable_tx_fifo(struct iwl_priv *priv)
{
unsigned long flags;
int ret;
spin_lock_irqsave(&priv->lock, flags);
ret = iwl_grab_nic_access(priv);
if (unlikely(ret)) {
IWL_ERROR("Tx fifo reset failed");
spin_unlock_irqrestore(&priv->lock, flags);
return ret;
}
iwl_write_prph(priv, IWL49_SCD_TXFACT, 0);
iwl_release_nic_access(priv);
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
static int iwl4965_apm_init(struct iwl_priv *priv)
{
int ret = 0;
iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
/* set "initialization complete" bit to move adapter
* D0U* --> D0A* state */
iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
/* wait for clock stabilization */
ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
if (ret < 0) {
IWL_DEBUG_INFO("Failed to init the card\n");
goto out;
}
ret = iwl_grab_nic_access(priv);
if (ret)
goto out;
/* enable DMA */
iwl_write_prph(priv, APMG_CLK_CTRL_REG,
APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT);
udelay(20);
iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
iwl_release_nic_access(priv);
out:
return ret;
}
static void iwl4965_nic_config(struct iwl_priv *priv)
{
unsigned long flags;
u32 val;
u16 radio_cfg;
u8 val_link;
spin_lock_irqsave(&priv->lock, flags);
if ((priv->rev_id & 0x80) == 0x80 && (priv->rev_id & 0x7f) < 8) {
pci_read_config_dword(priv->pci_dev, PCI_REG_WUM8, &val);
/* Enable No Snoop field */
pci_write_config_dword(priv->pci_dev, PCI_REG_WUM8,
val & ~(1 << 11));
}
pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link);
/* disable L1 entry -- workaround for pre-B1 */
pci_write_config_byte(priv->pci_dev, PCI_LINK_CTRL, val_link & ~0x02);
radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
/* write radio config values to register */
if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX)
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
EEPROM_RF_CFG_DASH_MSK(radio_cfg));
/* set CSR_HW_CONFIG_REG for uCode use */
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
priv->calib_info = (struct iwl_eeprom_calib_info *)
iwl_eeprom_query_addr(priv, EEPROM_4965_CALIB_TXPOWER_OFFSET);
spin_unlock_irqrestore(&priv->lock, flags);
}
int iwl4965_hw_nic_stop_master(struct iwl_priv *priv)
{
int rc = 0;
u32 reg_val;
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
/* set stop master bit */
iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
reg_val = iwl_read32(priv, CSR_GP_CNTRL);
if (CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE ==
(reg_val & CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE))
IWL_DEBUG_INFO("Card in power save, master is already "
"stopped\n");
else {
rc = iwl_poll_bit(priv, CSR_RESET,
CSR_RESET_REG_FLAG_MASTER_DISABLED,
CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
if (rc < 0) {
spin_unlock_irqrestore(&priv->lock, flags);
return rc;
}
}
spin_unlock_irqrestore(&priv->lock, flags);
IWL_DEBUG_INFO("stop master\n");
return rc;
}
/**
* iwl4965_hw_txq_ctx_stop - Stop all Tx DMA channels, free Tx queue memory
*/
void iwl4965_hw_txq_ctx_stop(struct iwl_priv *priv)
{
int txq_id;
unsigned long flags;
/* Stop each Tx DMA channel, and wait for it to be idle */
for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
spin_lock_irqsave(&priv->lock, flags);
if (iwl_grab_nic_access(priv)) {
spin_unlock_irqrestore(&priv->lock, flags);
continue;
}
iwl_write_direct32(priv,
FH_TCSR_CHNL_TX_CONFIG_REG(txq_id), 0x0);
iwl_poll_direct_bit(priv, FH_TSSR_TX_STATUS_REG,
FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE
(txq_id), 200);
iwl_release_nic_access(priv);
spin_unlock_irqrestore(&priv->lock, flags);
}
/* Deallocate memory for all Tx queues */
iwl_hw_txq_ctx_free(priv);
}
int iwl4965_hw_nic_reset(struct iwl_priv *priv)
{
int rc = 0;
unsigned long flags;
iwl4965_hw_nic_stop_master(priv);
spin_lock_irqsave(&priv->lock, flags);
iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
udelay(10);
iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
rc = iwl_poll_bit(priv, CSR_RESET,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25);
udelay(10);
rc = iwl_grab_nic_access(priv);
if (!rc) {
iwl_write_prph(priv, APMG_CLK_EN_REG,
APMG_CLK_VAL_DMA_CLK_RQT |
APMG_CLK_VAL_BSM_CLK_RQT);
udelay(10);
iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
iwl_release_nic_access(priv);
}
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
wake_up_interruptible(&priv->wait_command_queue);
spin_unlock_irqrestore(&priv->lock, flags);
return rc;
}
#define REG_RECALIB_PERIOD (60)
/**
* iwl4965_bg_statistics_periodic - Timer callback to queue statistics
*
* This callback is provided in order to send a statistics request.
*
* This timer function is continually reset to execute within
* REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
* was received. We need to ensure we receive the statistics in order
* to update the temperature used for calibrating the TXPOWER.
*/
static void iwl4965_bg_statistics_periodic(unsigned long data)
{
struct iwl_priv *priv = (struct iwl_priv *)data;
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
iwl_send_statistics_request(priv, CMD_ASYNC);
}
void iwl4965_rf_kill_ct_config(struct iwl_priv *priv)
{
struct iwl4965_ct_kill_config cmd;
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&priv->lock, flags);
iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
spin_unlock_irqrestore(&priv->lock, flags);
cmd.critical_temperature_R =
cpu_to_le32(priv->hw_params.ct_kill_threshold);
ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
sizeof(cmd), &cmd);
if (ret)
IWL_ERROR("REPLY_CT_KILL_CONFIG_CMD failed\n");
else
IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded, "
"critical temperature is %d\n",
cmd.critical_temperature_R);
}
#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
/* Reset differential Rx gains in NIC to prepare for chain noise calibration.
* Called after every association, but this runs only once!
* ... once chain noise is calibrated the first time, it's good forever. */
static void iwl4965_chain_noise_reset(struct iwl_priv *priv)
{
struct iwl_chain_noise_data *data = &(priv->chain_noise_data);
if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) {
struct iwl4965_calibration_cmd cmd;
memset(&cmd, 0, sizeof(cmd));
cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD;
cmd.diff_gain_a = 0;
cmd.diff_gain_b = 0;
cmd.diff_gain_c = 0;
if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
sizeof(cmd), &cmd))
IWL_ERROR("Could not send REPLY_PHY_CALIBRATION_CMD\n");
data->state = IWL_CHAIN_NOISE_ACCUMULATE;
IWL_DEBUG_CALIB("Run chain_noise_calibrate\n");
}
}
static void iwl4965_gain_computation(struct iwl_priv *priv,
u32 *average_noise,
u16 min_average_noise_antenna_i,
u32 min_average_noise)
{
int i, ret;
struct iwl_chain_noise_data *data = &priv->chain_noise_data;
data->delta_gain_code[min_average_noise_antenna_i] = 0;
for (i = 0; i < NUM_RX_CHAINS; i++) {
s32 delta_g = 0;
if (!(data->disconn_array[i]) &&
(data->delta_gain_code[i] ==
CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) {
delta_g = average_noise[i] - min_average_noise;
data->delta_gain_code[i] = (u8)((delta_g * 10) / 15);
data->delta_gain_code[i] =
min(data->delta_gain_code[i],
(u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
data->delta_gain_code[i] =
(data->delta_gain_code[i] | (1 << 2));
} else {
data->delta_gain_code[i] = 0;
}
}
IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n",
data->delta_gain_code[0],
data->delta_gain_code[1],
data->delta_gain_code[2]);
/* Differential gain gets sent to uCode only once */
if (!data->radio_write) {
struct iwl4965_calibration_cmd cmd;
data->radio_write = 1;
memset(&cmd, 0, sizeof(cmd));
cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD;
cmd.diff_gain_a = data->delta_gain_code[0];
cmd.diff_gain_b = data->delta_gain_code[1];
cmd.diff_gain_c = data->delta_gain_code[2];
ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
sizeof(cmd), &cmd);
if (ret)
IWL_DEBUG_CALIB("fail sending cmd "
"REPLY_PHY_CALIBRATION_CMD \n");
/* TODO we might want recalculate
* rx_chain in rxon cmd */
/* Mark so we run this algo only once! */
data->state = IWL_CHAIN_NOISE_CALIBRATED;
}
data->chain_noise_a = 0;
data->chain_noise_b = 0;
data->chain_noise_c = 0;
data->chain_signal_a = 0;
data->chain_signal_b = 0;
data->chain_signal_c = 0;
data->beacon_count = 0;
}
static void iwl4965_bg_sensitivity_work(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work, struct iwl_priv,
sensitivity_work);
mutex_lock(&priv->mutex);
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
test_bit(STATUS_SCANNING, &priv->status)) {
mutex_unlock(&priv->mutex);
return;
}
if (priv->start_calib) {
iwl_chain_noise_calibration(priv, &priv->statistics);
iwl_sensitivity_calibration(priv, &priv->statistics);
}
mutex_unlock(&priv->mutex);
return;
}
#endif /*CONFIG_IWL4965_RUN_TIME_CALIB*/
static void iwl4965_bg_txpower_work(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work, struct iwl_priv,
txpower_work);
/* If a scan happened to start before we got here
* then just return; the statistics notification will
* kick off another scheduled work to compensate for
* any temperature delta we missed here. */
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
test_bit(STATUS_SCANNING, &priv->status))
return;
mutex_lock(&priv->mutex);
/* Regardless of if we are assocaited, we must reconfigure the
* TX power since frames can be sent on non-radar channels while
* not associated */
iwl4965_hw_reg_send_txpower(priv);
/* Update last_temperature to keep is_calib_needed from running
* when it isn't needed... */
priv->last_temperature = priv->temperature;
mutex_unlock(&priv->mutex);
}
/*
* Acquire priv->lock before calling this function !
*/
static void iwl4965_set_wr_ptrs(struct iwl_priv *priv, int txq_id, u32 index)
{
iwl_write_direct32(priv, HBUS_TARG_WRPTR,
(index & 0xff) | (txq_id << 8));
iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(txq_id), index);
}
/**
* iwl4965_tx_queue_set_status - (optionally) start Tx/Cmd queue
* @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed
* @scd_retry: (1) Indicates queue will be used in aggregation mode
*
* NOTE: Acquire priv->lock before calling this function !
*/
static void iwl4965_tx_queue_set_status(struct iwl_priv *priv,
struct iwl_tx_queue *txq,
int tx_fifo_id, int scd_retry)
{
int txq_id = txq->q.id;
/* Find out whether to activate Tx queue */
int active = test_bit(txq_id, &priv->txq_ctx_active_msk)?1:0;
/* Set up and activate */
iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
(active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
(tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) |
(scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) |
(scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
IWL49_SCD_QUEUE_STTS_REG_MSK);
txq->sched_retry = scd_retry;
IWL_DEBUG_INFO("%s %s Queue %d on AC %d\n",
active ? "Activate" : "Deactivate",
scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
}
static const u16 default_queue_to_tx_fifo[] = {
IWL_TX_FIFO_AC3,
IWL_TX_FIFO_AC2,
IWL_TX_FIFO_AC1,
IWL_TX_FIFO_AC0,
IWL49_CMD_FIFO_NUM,
IWL_TX_FIFO_HCCA_1,
IWL_TX_FIFO_HCCA_2
};
static inline void iwl4965_txq_ctx_activate(struct iwl_priv *priv, int txq_id)
{
set_bit(txq_id, &priv->txq_ctx_active_msk);
}
static inline void iwl4965_txq_ctx_deactivate(struct iwl_priv *priv, int txq_id)
{
clear_bit(txq_id, &priv->txq_ctx_active_msk);
}
int iwl4965_alive_notify(struct iwl_priv *priv)
{
u32 a;
int i = 0;
unsigned long flags;
int ret;
spin_lock_irqsave(&priv->lock, flags);
#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
memset(&(priv->sensitivity_data), 0,
sizeof(struct iwl_sensitivity_data));
memset(&(priv->chain_noise_data), 0,
sizeof(struct iwl_chain_noise_data));
for (i = 0; i < NUM_RX_CHAINS; i++)
priv->chain_noise_data.delta_gain_code[i] =
CHAIN_NOISE_DELTA_GAIN_INIT_VAL;
#endif /* CONFIG_IWL4965_RUN_TIME_CALIB*/
ret = iwl_grab_nic_access(priv);
if (ret) {
spin_unlock_irqrestore(&priv->lock, flags);
return ret;
}
/* Clear 4965's internal Tx Scheduler data base */
priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR);
a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET;
for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
iwl_write_targ_mem(priv, a, 0);
for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
iwl_write_targ_mem(priv, a, 0);
for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4)
iwl_write_targ_mem(priv, a, 0);
/* Tel 4965 where to find Tx byte count tables */
iwl_write_prph(priv, IWL49_SCD_DRAM_BASE_ADDR,
(priv->shared_phys +
offsetof(struct iwl4965_shared, queues_byte_cnt_tbls)) >> 10);
/* Disable chain mode for all queues */
iwl_write_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, 0);
/* Initialize each Tx queue (including the command queue) */
for (i = 0; i < priv->hw_params.max_txq_num; i++) {
/* TFD circular buffer read/write indexes */
iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(i), 0);
iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8));
/* Max Tx Window size for Scheduler-ACK mode */
iwl_write_targ_mem(priv, priv->scd_base_addr +
IWL49_SCD_CONTEXT_QUEUE_OFFSET(i),
(SCD_WIN_SIZE <<
IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
/* Frame limit */
iwl_write_targ_mem(priv, priv->scd_base_addr +
IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) +
sizeof(u32),
(SCD_FRAME_LIMIT <<
IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
}
iwl_write_prph(priv, IWL49_SCD_INTERRUPT_MASK,
(1 << priv->hw_params.max_txq_num) - 1);
/* Activate all Tx DMA/FIFO channels */
iwl_write_prph(priv, IWL49_SCD_TXFACT,
SCD_TXFACT_REG_TXFIFO_MASK(0, 7));
iwl4965_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);
/* Map each Tx/cmd queue to its corresponding fifo */
for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
int ac = default_queue_to_tx_fifo[i];
iwl4965_txq_ctx_activate(priv, i);
iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
}
iwl_release_nic_access(priv);
spin_unlock_irqrestore(&priv->lock, flags);
/* Ask for statistics now, the uCode will send statistics notification
* periodically after association */
iwl_send_statistics_request(priv, CMD_ASYNC);
return ret;
}
#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
.min_nrg_cck = 97,
.max_nrg_cck = 0,
.auto_corr_min_ofdm = 85,
.auto_corr_min_ofdm_mrc = 170,
.auto_corr_min_ofdm_x1 = 105,
.auto_corr_min_ofdm_mrc_x1 = 220,
.auto_corr_max_ofdm = 120,
.auto_corr_max_ofdm_mrc = 210,
.auto_corr_max_ofdm_x1 = 140,
.auto_corr_max_ofdm_mrc_x1 = 270,
.auto_corr_min_cck = 125,
.auto_corr_max_cck = 200,
.auto_corr_min_cck_mrc = 200,
.auto_corr_max_cck_mrc = 400,
.nrg_th_cck = 100,
.nrg_th_ofdm = 100,
};
#endif
/**
* iwl4965_hw_set_hw_params
*
* Called when initializing driver
*/
int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
{
if ((priv->cfg->mod_params->num_of_queues > IWL49_NUM_QUEUES) ||
(priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) {
IWL_ERROR("invalid queues_num, should be between %d and %d\n",
IWL_MIN_NUM_QUEUES, IWL49_NUM_QUEUES);
return -EINVAL;
}
priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues;
priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto;
priv->hw_params.tx_cmd_len = sizeof(struct iwl4965_tx_cmd);
priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
if (priv->cfg->mod_params->amsdu_size_8K)
priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K;
else
priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K;
priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256;
priv->hw_params.max_stations = IWL4965_STATION_COUNT;
priv->hw_params.bcast_sta_id = IWL4965_BROADCAST_ID;
priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE;
priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE;
priv->hw_params.max_bsm_size = BSM_SRAM_SIZE;
priv->hw_params.fat_channel = BIT(IEEE80211_BAND_5GHZ);
priv->hw_params.tx_chains_num = 2;
priv->hw_params.rx_chains_num = 2;
priv->hw_params.valid_tx_ant = ANT_A | ANT_B;
priv->hw_params.valid_rx_ant = ANT_A | ANT_B;
priv->hw_params.ct_kill_threshold = CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD);
#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
priv->hw_params.sens = &iwl4965_sensitivity;
#endif
return 0;
}
/* set card power command */
static int iwl4965_set_power(struct iwl_priv *priv,
void *cmd)
{
int ret = 0;
ret = iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD,
sizeof(struct iwl4965_powertable_cmd),
cmd, NULL);
return ret;
}
int iwl4965_hw_reg_set_txpower(struct iwl_priv *priv, s8 power)
{
IWL_ERROR("TODO: Implement iwl4965_hw_reg_set_txpower!\n");
return -EINVAL;
}
static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res)
{
s32 sign = 1;
if (num < 0) {
sign = -sign;
num = -num;
}
if (denom < 0) {
sign = -sign;
denom = -denom;
}
*res = 1;
*res = ((num * 2 + denom) / (denom * 2)) * sign;
return 1;
}
/**
* iwl4965_get_voltage_compensation - Power supply voltage comp for txpower
*
* Determines power supply voltage compensation for txpower calculations.
* Returns number of 1/2-dB steps to subtract from gain table index,
* to compensate for difference between power supply voltage during
* factory measurements, vs. current power supply voltage.
*
* Voltage indication is higher for lower voltage.
* Lower voltage requires more gain (lower gain table index).
*/
static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage,
s32 current_voltage)
{
s32 comp = 0;
if ((TX_POWER_IWL_ILLEGAL_VOLTAGE == eeprom_voltage) ||
(TX_POWER_IWL_ILLEGAL_VOLTAGE == current_voltage))
return 0;
iwl4965_math_div_round(current_voltage - eeprom_voltage,
TX_POWER_IWL_VOLTAGE_CODES_PER_03V, &comp);
if (current_voltage > eeprom_voltage)
comp *= 2;
if ((comp < -2) || (comp > 2))
comp = 0;
return comp;
}
static const struct iwl_channel_info *
iwl4965_get_channel_txpower_info(struct iwl_priv *priv,
enum ieee80211_band band, u16 channel)
{
const struct iwl_channel_info *ch_info;
ch_info = iwl_get_channel_info(priv, band, channel);
if (!is_channel_valid(ch_info))
return NULL;
return ch_info;
}
static s32 iwl4965_get_tx_atten_grp(u16 channel)
{
if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH &&
channel <= CALIB_IWL_TX_ATTEN_GR5_LCH)
return CALIB_CH_GROUP_5;
if (channel >= CALIB_IWL_TX_ATTEN_GR1_FCH &&
channel <= CALIB_IWL_TX_ATTEN_GR1_LCH)
return CALIB_CH_GROUP_1;
if (channel >= CALIB_IWL_TX_ATTEN_GR2_FCH &&
channel <= CALIB_IWL_TX_ATTEN_GR2_LCH)
return CALIB_CH_GROUP_2;
if (channel >= CALIB_IWL_TX_ATTEN_GR3_FCH &&
channel <= CALIB_IWL_TX_ATTEN_GR3_LCH)
return CALIB_CH_GROUP_3;
if (channel >= CALIB_IWL_TX_ATTEN_GR4_FCH &&
channel <= CALIB_IWL_TX_ATTEN_GR4_LCH)
return CALIB_CH_GROUP_4;
IWL_ERROR("Can't find txatten group for channel %d.\n", channel);
return -1;
}
static u32 iwl4965_get_sub_band(const struct iwl_priv *priv, u32 channel)
{
s32 b = -1;
for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) {
if (priv->calib_info->band_info[b].ch_from == 0)
continue;
if ((channel >= priv->calib_info->band_info[b].ch_from)
&& (channel <= priv->calib_info->band_info[b].ch_to))
break;
}
return b;
}
static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
{
s32 val;
if (x2 == x1)
return y1;
else {
iwl4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val);
return val + y2;
}
}
/**
* iwl4965_interpolate_chan - Interpolate factory measurements for one channel
*
* Interpolates factory measurements from the two sample channels within a
* sub-band, to apply to channel of interest. Interpolation is proportional to
* differences in channel frequencies, which is proportional to differences
* in channel number.
*/
static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel,
struct iwl_eeprom_calib_ch_info *chan_info)
{
s32 s = -1;
u32 c;
u32 m;
const struct iwl_eeprom_calib_measure *m1;
const struct iwl_eeprom_calib_measure *m2;
struct iwl_eeprom_calib_measure *omeas;
u32 ch_i1;
u32 ch_i2;
s = iwl4965_get_sub_band(priv, channel);
if (s >= EEPROM_TX_POWER_BANDS) {
IWL_ERROR("Tx Power can not find channel %d ", channel);
return -1;
}
ch_i1 = priv->calib_info->band_info[s].ch1.ch_num;
ch_i2 = priv->calib_info->band_info[s].ch2.ch_num;
chan_info->ch_num = (u8) channel;
IWL_DEBUG_TXPOWER("channel %d subband %d factory cal ch %d & %d\n",
channel, s, ch_i1, ch_i2);
for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) {
for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) {
m1 = &(priv->calib_info->band_info[s].ch1.
measurements[c][m]);
m2 = &(priv->calib_info->band_info[s].ch2.
measurements[c][m]);
omeas = &(chan_info->measurements[c][m]);
omeas->actual_pow =
(u8) iwl4965_interpolate_value(channel, ch_i1,
m1->actual_pow,
ch_i2,
m2->actual_pow);
omeas->gain_idx =
(u8) iwl4965_interpolate_value(channel, ch_i1,
m1->gain_idx, ch_i2,
m2->gain_idx);
omeas->temperature =
(u8) iwl4965_interpolate_value(channel, ch_i1,
m1->temperature,
ch_i2,
m2->temperature);
omeas->pa_det =
(s8) iwl4965_interpolate_value(channel, ch_i1,
m1->pa_det, ch_i2,
m2->pa_det);
IWL_DEBUG_TXPOWER
("chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m,
m1->actual_pow, m2->actual_pow, omeas->actual_pow);
IWL_DEBUG_TXPOWER
("chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m,
m1->gain_idx, m2->gain_idx, omeas->gain_idx);
IWL_DEBUG_TXPOWER
("chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m,
m1->pa_det, m2->pa_det, omeas->pa_det);
IWL_DEBUG_TXPOWER
("chain %d meas %d T1=%d T2=%d T=%d\n", c, m,
m1->temperature, m2->temperature,
omeas->temperature);
}
}
return 0;
}
/* bit-rate-dependent table to prevent Tx distortion, in half-dB units,
* for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */
static s32 back_off_table[] = {
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */
10 /* CCK */
};
/* Thermal compensation values for txpower for various frequency ranges ...
* ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */
static struct iwl4965_txpower_comp_entry {
s32 degrees_per_05db_a;
s32 degrees_per_05db_a_denom;
} tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = {
{9, 2}, /* group 0 5.2, ch 34-43 */
{4, 1}, /* group 1 5.2, ch 44-70 */
{4, 1}, /* group 2 5.2, ch 71-124 */
{4, 1}, /* group 3 5.2, ch 125-200 */
{3, 1} /* group 4 2.4, ch all */
};
static s32 get_min_power_index(s32 rate_power_index, u32 band)
{
if (!band) {
if ((rate_power_index & 7) <= 4)
return MIN_TX_GAIN_INDEX_52GHZ_EXT;
}
return MIN_TX_GAIN_INDEX;
}
struct gain_entry {
u8 dsp;
u8 radio;
};
static const struct gain_entry gain_table[2][108] = {
/* 5.2GHz power gain index table */
{
{123, 0x3F}, /* highest txpower */
{117, 0x3F},
{110, 0x3F},
{104, 0x3F},
{98, 0x3F},
{110, 0x3E},
{104, 0x3E},
{98, 0x3E},
{110, 0x3D},
{104, 0x3D},
{98, 0x3D},
{110, 0x3C},
{104, 0x3C},
{98, 0x3C},
{110, 0x3B},
{104, 0x3B},
{98, 0x3B},
{110, 0x3A},
{104, 0x3A},
{98, 0x3A},
{110, 0x39},
{104, 0x39},
{98, 0x39},
{110, 0x38},
{104, 0x38},
{98, 0x38},
{110, 0x37},
{104, 0x37},
{98, 0x37},
{110, 0x36},
{104, 0x36},
{98, 0x36},
{110, 0x35},
{104, 0x35},
{98, 0x35},
{110, 0x34},
{104, 0x34},
{98, 0x34},
{110, 0x33},
{104, 0x33},
{98, 0x33},
{110, 0x32},
{104, 0x32},
{98, 0x32},
{110, 0x31},
{104, 0x31},
{98, 0x31},
{110, 0x30},
{104, 0x30},
{98, 0x30},
{110, 0x25},
{104, 0x25},
{98, 0x25},
{110, 0x24},
{104, 0x24},
{98, 0x24},
{110, 0x23},
{104, 0x23},
{98, 0x23},
{110, 0x22},
{104, 0x18},
{98, 0x18},
{110, 0x17},
{104, 0x17},
{98, 0x17},
{110, 0x16},
{104, 0x16},
{98, 0x16},
{110, 0x15},
{104, 0x15},
{98, 0x15},
{110, 0x14},
{104, 0x14},
{98, 0x14},
{110, 0x13},
{104, 0x13},
{98, 0x13},
{110, 0x12},
{104, 0x08},
{98, 0x08},
{110, 0x07},
{104, 0x07},
{98, 0x07},
{110, 0x06},
{104, 0x06},
{98, 0x06},
{110, 0x05},
{104, 0x05},
{98, 0x05},
{110, 0x04},
{104, 0x04},
{98, 0x04},
{110, 0x03},
{104, 0x03},
{98, 0x03},
{110, 0x02},
{104, 0x02},
{98, 0x02},
{110, 0x01},
{104, 0x01},
{98, 0x01},
{110, 0x00},
{104, 0x00},
{98, 0x00},
{93, 0x00},
{88, 0x00},
{83, 0x00},
{78, 0x00},
},
/* 2.4GHz power gain index table */
{
{110, 0x3f}, /* highest txpower */
{104, 0x3f},
{98, 0x3f},
{110, 0x3e},
{104, 0x3e},
{98, 0x3e},
{110, 0x3d},
{104, 0x3d},
{98, 0x3d},
{110, 0x3c},
{104, 0x3c},
{98, 0x3c},
{110, 0x3b},
{104, 0x3b},
{98, 0x3b},
{110, 0x3a},
{104, 0x3a},
{98, 0x3a},
{110, 0x39},
{104, 0x39},
{98, 0x39},
{110, 0x38},
{104, 0x38},
{98, 0x38},
{110, 0x37},
{104, 0x37},
{98, 0x37},
{110, 0x36},
{104, 0x36},
{98, 0x36},
{110, 0x35},
{104, 0x35},
{98, 0x35},
{110, 0x34},
{104, 0x34},
{98, 0x34},
{110, 0x33},
{104, 0x33},
{98, 0x33},
{110, 0x32},
{104, 0x32},
{98, 0x32},
{110, 0x31},
{104, 0x31},
{98, 0x31},
{110, 0x30},
{104, 0x30},
{98, 0x30},
{110, 0x6},
{104, 0x6},
{98, 0x6},
{110, 0x5},
{104, 0x5},
{98, 0x5},
{110, 0x4},
{104, 0x4},
{98, 0x4},
{110, 0x3},
{104, 0x3},
{98, 0x3},
{110, 0x2},
{104, 0x2},
{98, 0x2},
{110, 0x1},
{104, 0x1},
{98, 0x1},
{110, 0x0},
{104, 0x0},
{98, 0x0},
{97, 0},
{96, 0},
{95, 0},
{94, 0},
{93, 0},
{92, 0},
{91, 0},
{90, 0},
{89, 0},
{88, 0},
{87, 0},
{86, 0},
{85, 0},
{84, 0},
{83, 0},
{82, 0},
{81, 0},
{80, 0},
{79, 0},
{78, 0},
{77, 0},
{76, 0},
{75, 0},
{74, 0},
{73, 0},
{72, 0},
{71, 0},
{70, 0},
{69, 0},
{68, 0},
{67, 0},
{66, 0},
{65, 0},
{64, 0},
{63, 0},
{62, 0},
{61, 0},
{60, 0},
{59, 0},
}
};
static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
u8 is_fat, u8 ctrl_chan_high,
struct iwl4965_tx_power_db *tx_power_tbl)
{
u8 saturation_power;
s32 target_power;
s32 user_target_power;
s32 power_limit;
s32 current_temp;
s32 reg_limit;
s32 current_regulatory;
s32 txatten_grp = CALIB_CH_GROUP_MAX;
int i;
int c;
const struct iwl_channel_info *ch_info = NULL;
struct iwl_eeprom_calib_ch_info ch_eeprom_info;
const struct iwl_eeprom_calib_measure *measurement;
s16 voltage;
s32 init_voltage;
s32 voltage_compensation;
s32 degrees_per_05db_num;
s32 degrees_per_05db_denom;
s32 factory_temp;
s32 temperature_comp[2];
s32 factory_gain_index[2];
s32 factory_actual_pwr[2];
s32 power_index;
/* Sanity check requested level (dBm) */
if (priv->user_txpower_limit < IWL_TX_POWER_TARGET_POWER_MIN) {
IWL_WARNING("Requested user TXPOWER %d below limit.\n",
priv->user_txpower_limit);
return -EINVAL;
}
if (priv->user_txpower_limit > IWL_TX_POWER_TARGET_POWER_MAX) {
IWL_WARNING("Requested user TXPOWER %d above limit.\n",
priv->user_txpower_limit);
return -EINVAL;
}
/* user_txpower_limit is in dBm, convert to half-dBm (half-dB units
* are used for indexing into txpower table) */
user_target_power = 2 * priv->user_txpower_limit;
/* Get current (RXON) channel, band, width */
ch_info =
iwl4965_get_channel_txpower_info(priv, priv->band, channel);
IWL_DEBUG_TXPOWER("chan %d band %d is_fat %d\n", channel, band,
is_fat);
if (!ch_info)
return -EINVAL;
/* get txatten group, used to select 1) thermal txpower adjustment
* and 2) mimo txpower balance between Tx chains. */
txatten_grp = iwl4965_get_tx_atten_grp(channel);
if (txatten_grp < 0)
return -EINVAL;
IWL_DEBUG_TXPOWER("channel %d belongs to txatten group %d\n",
channel, txatten_grp);
if (is_fat) {
if (ctrl_chan_high)
channel -= 2;
else
channel += 2;
}
/* hardware txpower limits ...
* saturation (clipping distortion) txpowers are in half-dBm */
if (band)
saturation_power = priv->calib_info->saturation_power24;
else
saturation_power = priv->calib_info->saturation_power52;
if (saturation_power < IWL_TX_POWER_SATURATION_MIN ||
saturation_power > IWL_TX_POWER_SATURATION_MAX) {
if (band)
saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_24;
else
saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_52;
}
/* regulatory txpower limits ... reg_limit values are in half-dBm,
* max_power_avg values are in dBm, convert * 2 */
if (is_fat)
reg_limit = ch_info->fat_max_power_avg * 2;
else
reg_limit = ch_info->max_power_avg * 2;
if ((reg_limit < IWL_TX_POWER_REGULATORY_MIN) ||
(reg_limit > IWL_TX_POWER_REGULATORY_MAX)) {
if (band)
reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_24;
else
reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_52;
}
/* Interpolate txpower calibration values for this channel,
* based on factory calibration tests on spaced channels. */
iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info);
/* calculate tx gain adjustment based on power supply voltage */
voltage = priv->calib_info->voltage;
init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage);
voltage_compensation =
iwl4965_get_voltage_compensation(voltage, init_voltage);
IWL_DEBUG_TXPOWER("curr volt %d eeprom volt %d volt comp %d\n",
init_voltage,
voltage, voltage_compensation);
/* get current temperature (Celsius) */
current_temp = max(priv->temperature, IWL_TX_POWER_TEMPERATURE_MIN);
current_temp = min(priv->temperature, IWL_TX_POWER_TEMPERATURE_MAX);
current_temp = KELVIN_TO_CELSIUS(current_temp);
/* select thermal txpower adjustment params, based on channel group
* (same frequency group used for mimo txatten adjustment) */
degrees_per_05db_num =
tx_power_cmp_tble[txatten_grp].degrees_per_05db_a;
degrees_per_05db_denom =
tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom;
/* get per-chain txpower values from factory measurements */
for (c = 0; c < 2; c++) {
measurement = &ch_eeprom_info.measurements[c][1];
/* txgain adjustment (in half-dB steps) based on difference
* between factory and current temperature */
factory_temp = measurement->temperature;
iwl4965_math_div_round((current_temp - factory_temp) *
degrees_per_05db_denom,
degrees_per_05db_num,
&temperature_comp[c]);
factory_gain_index[c] = measurement->gain_idx;
factory_actual_pwr[c] = measurement->actual_pow;
IWL_DEBUG_TXPOWER("chain = %d\n", c);
IWL_DEBUG_TXPOWER("fctry tmp %d, "
"curr tmp %d, comp %d steps\n",
factory_temp, current_temp,
temperature_comp[c]);
IWL_DEBUG_TXPOWER("fctry idx %d, fctry pwr %d\n",
factory_gain_index[c],
factory_actual_pwr[c]);
}
/* for each of 33 bit-rates (including 1 for CCK) */
for (i = 0; i < POWER_TABLE_NUM_ENTRIES; i++) {
u8 is_mimo_rate;
union iwl4965_tx_power_dual_stream tx_power;
/* for mimo, reduce each chain's txpower by half
* (3dB, 6 steps), so total output power is regulatory
* compliant. */
if (i & 0x8) {
current_regulatory = reg_limit -
IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION;
is_mimo_rate = 1;
} else {
current_regulatory = reg_limit;
is_mimo_rate = 0;
}
/* find txpower limit, either hardware or regulatory */
power_limit = saturation_power - back_off_table[i];
if (power_limit > current_regulatory)
power_limit = current_regulatory;
/* reduce user's txpower request if necessary
* for this rate on this channel */
target_power = user_target_power;
if (target_power > power_limit)
target_power = power_limit;
IWL_DEBUG_TXPOWER("rate %d sat %d reg %d usr %d tgt %d\n",
i, saturation_power - back_off_table[i],
current_regulatory, user_target_power,
target_power);
/* for each of 2 Tx chains (radio transmitters) */
for (c = 0; c < 2; c++) {
s32 atten_value;
if (is_mimo_rate)
atten_value =
(s32)le32_to_cpu(priv->card_alive_init.
tx_atten[txatten_grp][c]);
else
atten_value = 0;
/* calculate index; higher index means lower txpower */
power_index = (u8) (factory_gain_index[c] -
(target_power -
factory_actual_pwr[c]) -
temperature_comp[c] -
voltage_compensation +
atten_value);
/* IWL_DEBUG_TXPOWER("calculated txpower index %d\n",
power_index); */
if (power_index < get_min_power_index(i, band))
power_index = get_min_power_index(i, band);
/* adjust 5 GHz index to support negative indexes */
if (!band)
power_index += 9;
/* CCK, rate 32, reduce txpower for CCK */
if (i == POWER_TABLE_CCK_ENTRY)
power_index +=
IWL_TX_POWER_CCK_COMPENSATION_C_STEP;
/* stay within the table! */
if (power_index > 107) {
IWL_WARNING("txpower index %d > 107\n",
power_index);
power_index = 107;
}
if (power_index < 0) {
IWL_WARNING("txpower index %d < 0\n",
power_index);
power_index = 0;
}
/* fill txpower command for this rate/chain */
tx_power.s.radio_tx_gain[c] =
gain_table[band][power_index].radio;
tx_power.s.dsp_predis_atten[c] =
gain_table[band][power_index].dsp;
IWL_DEBUG_TXPOWER("chain %d mimo %d index %d "
"gain 0x%02x dsp %d\n",
c, atten_value, power_index,
tx_power.s.radio_tx_gain[c],
tx_power.s.dsp_predis_atten[c]);
}/* for each chain */
tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
}/* for each rate */
return 0;
}
/**
* iwl4965_hw_reg_send_txpower - Configure the TXPOWER level user limit
*
* Uses the active RXON for channel, band, and characteristics (fat, high)
* The power limit is taken from priv->user_txpower_limit.
*/
int iwl4965_hw_reg_send_txpower(struct iwl_priv *priv)
{
struct iwl4965_txpowertable_cmd cmd = { 0 };
int ret;
u8 band = 0;
u8 is_fat = 0;
u8 ctrl_chan_high = 0;
if (test_bit(STATUS_SCANNING, &priv->status)) {
/* If this gets hit a lot, switch it to a BUG() and catch
* the stack trace to find out who is calling this during
* a scan. */
IWL_WARNING("TX Power requested while scanning!\n");
return -EAGAIN;
}
band = priv->band == IEEE80211_BAND_2GHZ;
is_fat = is_fat_channel(priv->active_rxon.flags);
if (is_fat &&
(priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
ctrl_chan_high = 1;
cmd.band = band;
cmd.channel = priv->active_rxon.channel;
ret = iwl4965_fill_txpower_tbl(priv, band,
le16_to_cpu(priv->active_rxon.channel),
is_fat, ctrl_chan_high, &cmd.tx_power);
if (ret)
goto out;
ret = iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, sizeof(cmd), &cmd);
out:
return ret;
}
static int iwl4965_send_rxon_assoc(struct iwl_priv *priv)
{
int ret = 0;
struct iwl4965_rxon_assoc_cmd rxon_assoc;
const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon;
const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon;
if ((rxon1->flags == rxon2->flags) &&
(rxon1->filter_flags == rxon2->filter_flags) &&
(rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
(rxon1->ofdm_ht_single_stream_basic_rates ==
rxon2->ofdm_ht_single_stream_basic_rates) &&
(rxon1->ofdm_ht_dual_stream_basic_rates ==
rxon2->ofdm_ht_dual_stream_basic_rates) &&
(rxon1->rx_chain == rxon2->rx_chain) &&
(rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
IWL_DEBUG_INFO("Using current RXON_ASSOC. Not resending.\n");
return 0;
}
rxon_assoc.flags = priv->staging_rxon.flags;
rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
rxon_assoc.reserved = 0;
rxon_assoc.ofdm_ht_single_stream_basic_rates =
priv->staging_rxon.ofdm_ht_single_stream_basic_rates;
rxon_assoc.ofdm_ht_dual_stream_basic_rates =
priv->staging_rxon.ofdm_ht_dual_stream_basic_rates;
rxon_assoc.rx_chain_select_flags = priv->staging_rxon.rx_chain;
ret = iwl_send_cmd_pdu_async(priv, REPLY_RXON_ASSOC,
sizeof(rxon_assoc), &rxon_assoc, NULL);
if (ret)
return ret;
return ret;
}
int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel)
{
int rc;
u8 band = 0;
u8 is_fat = 0;
u8 ctrl_chan_high = 0;
struct iwl4965_channel_switch_cmd cmd = { 0 };
const struct iwl_channel_info *ch_info;
band = priv->band == IEEE80211_BAND_2GHZ;
ch_info = iwl_get_channel_info(priv, priv->band, channel);
is_fat = is_fat_channel(priv->staging_rxon.flags);
if (is_fat &&
(priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
ctrl_chan_high = 1;
cmd.band = band;
cmd.expect_beacon = 0;
cmd.channel = cpu_to_le16(channel);
cmd.rxon_flags = priv->active_rxon.flags;
cmd.rxon_filter_flags = priv->active_rxon.filter_flags;
cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
if (ch_info)
cmd.expect_beacon = is_channel_radar(ch_info);
else
cmd.expect_beacon = 1;
rc = iwl4965_fill_txpower_tbl(priv, band, channel, is_fat,
ctrl_chan_high, &cmd.tx_power);
if (rc) {
IWL_DEBUG_11H("error:%d fill txpower_tbl\n", rc);
return rc;
}
rc = iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
return rc;
}
#define RTS_HCCA_RETRY_LIMIT 3
#define RTS_DFAULT_RETRY_LIMIT 60
void iwl4965_hw_build_tx_cmd_rate(struct iwl_priv *priv,
struct iwl_cmd *cmd,
struct ieee80211_tx_control *ctrl,
struct ieee80211_hdr *hdr, int sta_id,
int is_hcca)
{
struct iwl4965_tx_cmd *tx = &cmd->cmd.tx;
u8 rts_retry_limit = 0;
u8 data_retry_limit = 0;
u16 fc = le16_to_cpu(hdr->frame_control);
u8 rate_plcp;
u16 rate_flags = 0;
int rate_idx = min(ctrl->tx_rate->hw_value & 0xffff, IWL_RATE_COUNT - 1);
rate_plcp = iwl4965_rates[rate_idx].plcp;
rts_retry_limit = (is_hcca) ?
RTS_HCCA_RETRY_LIMIT : RTS_DFAULT_RETRY_LIMIT;
if ((rate_idx >= IWL_FIRST_CCK_RATE) && (rate_idx <= IWL_LAST_CCK_RATE))
rate_flags |= RATE_MCS_CCK_MSK;
if (ieee80211_is_probe_response(fc)) {
data_retry_limit = 3;
if (data_retry_limit < rts_retry_limit)
rts_retry_limit = data_retry_limit;
} else
data_retry_limit = IWL_DEFAULT_TX_RETRY;
if (priv->data_retry_limit != -1)
data_retry_limit = priv->data_retry_limit;
if (ieee80211_is_data(fc)) {
tx->initial_rate_index = 0;
tx->tx_flags |= TX_CMD_FLG_STA_RATE_MSK;
} else {
switch (fc & IEEE80211_FCTL_STYPE) {
case IEEE80211_STYPE_AUTH:
case IEEE80211_STYPE_DEAUTH:
case IEEE80211_STYPE_ASSOC_REQ:
case IEEE80211_STYPE_REASSOC_REQ:
if (tx->tx_flags & TX_CMD_FLG_RTS_MSK) {
tx->tx_flags &= ~TX_CMD_FLG_RTS_MSK;
tx->tx_flags |= TX_CMD_FLG_CTS_MSK;
}
break;
default:
break;
}
/* Alternate between antenna A and B for successive frames */
if (priv->use_ant_b_for_management_frame) {
priv->use_ant_b_for_management_frame = 0;
rate_flags |= RATE_MCS_ANT_B_MSK;
} else {
priv->use_ant_b_for_management_frame = 1;
rate_flags |= RATE_MCS_ANT_A_MSK;
}
}
tx->rts_retry_limit = rts_retry_limit;
tx->data_retry_limit = data_retry_limit;
tx->rate_n_flags = iwl4965_hw_set_rate_n_flags(rate_plcp, rate_flags);
}
static int iwl4965_shared_mem_rx_idx(struct iwl_priv *priv)
{
struct iwl4965_shared *s = priv->shared_virt;
return le32_to_cpu(s->rb_closed) & 0xFFF;
}
int iwl4965_hw_get_temperature(struct iwl_priv *priv)
{
return priv->temperature;
}
unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv,
struct iwl_frame *frame, u8 rate)
{
struct iwl4965_tx_beacon_cmd *tx_beacon_cmd;
unsigned int frame_size;
tx_beacon_cmd = &frame->u.beacon;
memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
frame_size = iwl4965_fill_beacon_frame(priv,
tx_beacon_cmd->frame,
iwl4965_broadcast_addr,
sizeof(frame->u) - sizeof(*tx_beacon_cmd));
BUG_ON(frame_size > MAX_MPDU_SIZE);
tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP))
tx_beacon_cmd->tx.rate_n_flags =
iwl4965_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK);
else
tx_beacon_cmd->tx.rate_n_flags =
iwl4965_hw_set_rate_n_flags(rate, 0);
tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK);
return (sizeof(*tx_beacon_cmd) + frame_size);
}
int iwl4965_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *ptr,
dma_addr_t addr, u16 len)
{
int index, is_odd;
struct iwl_tfd_frame *tfd = ptr;
u32 num_tbs = IWL_GET_BITS(*tfd, num_tbs);
/* Each TFD can point to a maximum 20 Tx buffers */
if ((num_tbs >= MAX_NUM_OF_TBS) || (num_tbs < 0)) {
IWL_ERROR("Error can not send more than %d chunks\n",
MAX_NUM_OF_TBS);
return -EINVAL;
}
index = num_tbs / 2;
is_odd = num_tbs & 0x1;
if (!is_odd) {
tfd->pa[index].tb1_addr = cpu_to_le32(addr);
IWL_SET_BITS(tfd->pa[index], tb1_addr_hi,
iwl_get_dma_hi_address(addr));
IWL_SET_BITS(tfd->pa[index], tb1_len, len);
} else {
IWL_SET_BITS(tfd->pa[index], tb2_addr_lo16,
(u32) (addr & 0xffff));
IWL_SET_BITS(tfd->pa[index], tb2_addr_hi20, addr >> 16);
IWL_SET_BITS(tfd->pa[index], tb2_len, len);
}
IWL_SET_BITS(*tfd, num_tbs, num_tbs + 1);
return 0;
}
static int iwl4965_alloc_shared_mem(struct iwl_priv *priv)
{
priv->shared_virt = pci_alloc_consistent(priv->pci_dev,
sizeof(struct iwl4965_shared),
&priv->shared_phys);
if (!priv->shared_virt)
return -ENOMEM;
memset(priv->shared_virt, 0, sizeof(struct iwl4965_shared));
priv->rb_closed_offset = offsetof(struct iwl4965_shared, rb_closed);
return 0;
}
static void iwl4965_free_shared_mem(struct iwl_priv *priv)
{
if (priv->shared_virt)
pci_free_consistent(priv->pci_dev,
sizeof(struct iwl4965_shared),
priv->shared_virt,
priv->shared_phys);
}
/**
* iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
*/
static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
struct iwl_tx_queue *txq,
u16 byte_cnt)
{
int len;
int txq_id = txq->q.id;
struct iwl4965_shared *shared_data = priv->shared_virt;
len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE;
/* Set up byte count within first 256 entries */
IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id].
tfd_offset[txq->q.write_ptr], byte_cnt, len);
/* If within first 64 entries, duplicate at end */
if (txq->q.write_ptr < IWL49_MAX_WIN_SIZE)
IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id].
tfd_offset[IWL49_QUEUE_SIZE + txq->q.write_ptr],
byte_cnt, len);
}
/**
* sign_extend - Sign extend a value using specified bit as sign-bit
*
* Example: sign_extend(9, 3) would return -7 as bit3 of 1001b is 1
* and bit0..2 is 001b which when sign extended to 1111111111111001b is -7.
*
* @param oper value to sign extend
* @param index 0 based bit index (0<=index<32) to sign bit
*/
static s32 sign_extend(u32 oper, int index)
{
u8 shift = 31 - index;
return (s32)(oper << shift) >> shift;
}
/**
* iwl4965_get_temperature - return the calibrated temperature (in Kelvin)
* @statistics: Provides the temperature reading from the uCode
*
* A return of <0 indicates bogus data in the statistics
*/
int iwl4965_get_temperature(const struct iwl_priv *priv)
{
s32 temperature;
s32 vt;
s32 R1, R2, R3;
u32 R4;
if (test_bit(STATUS_TEMPERATURE, &priv->status) &&
(priv->statistics.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK)) {
IWL_DEBUG_TEMP("Running FAT temperature calibration\n");
R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]);
R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]);
R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]);
R4 = le32_to_cpu(priv->card_alive_init.therm_r4[1]);
} else {
IWL_DEBUG_TEMP("Running temperature calibration\n");
R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]);
R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]);
R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]);
R4 = le32_to_cpu(priv->card_alive_init.therm_r4[0]);
}
/*
* Temperature is only 23 bits, so sign extend out to 32.
*
* NOTE If we haven't received a statistics notification yet
* with an updated temperature, use R4 provided to us in the
* "initialize" ALIVE response.
*/
if (!test_bit(STATUS_TEMPERATURE, &priv->status))
vt = sign_extend(R4, 23);
else
vt = sign_extend(
le32_to_cpu(priv->statistics.general.temperature), 23);
IWL_DEBUG_TEMP("Calib values R[1-3]: %d %d %d R4: %d\n",
R1, R2, R3, vt);
if (R3 == R1) {
IWL_ERROR("Calibration conflict R1 == R3\n");
return -1;
}
/* Calculate temperature in degrees Kelvin, adjust by 97%.
* Add offset to center the adjustment around 0 degrees Centigrade. */
temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2);
temperature /= (R3 - R1);
temperature = (temperature * 97) / 100 +
TEMPERATURE_CALIB_KELVIN_OFFSET;
IWL_DEBUG_TEMP("Calibrated temperature: %dK, %dC\n", temperature,
KELVIN_TO_CELSIUS(temperature));
return temperature;
}
/* Adjust Txpower only if temperature variance is greater than threshold. */
#define IWL_TEMPERATURE_THRESHOLD 3
/**
* iwl4965_is_temp_calib_needed - determines if new calibration is needed
*
* If the temperature changed has changed sufficiently, then a recalibration
* is needed.
*
* Assumes caller will replace priv->last_temperature once calibration
* executed.
*/
static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv)
{
int temp_diff;
if (!test_bit(STATUS_STATISTICS, &priv->status)) {
IWL_DEBUG_TEMP("Temperature not updated -- no statistics.\n");
return 0;
}
temp_diff = priv->temperature - priv->last_temperature;
/* get absolute value */
if (temp_diff < 0) {
IWL_DEBUG_POWER("Getting cooler, delta %d, \n", temp_diff);
temp_diff = -temp_diff;
} else if (temp_diff == 0)
IWL_DEBUG_POWER("Same temp, \n");
else
IWL_DEBUG_POWER("Getting warmer, delta %d, \n", temp_diff);
if (temp_diff < IWL_TEMPERATURE_THRESHOLD) {
IWL_DEBUG_POWER("Thermal txpower calib not needed\n");
return 0;
}
IWL_DEBUG_POWER("Thermal txpower calib needed\n");
return 1;
}
/* Calculate noise level, based on measurements during network silence just
* before arriving beacon. This measurement can be done only if we know
* exactly when to expect beacons, therefore only when we're associated. */
static void iwl4965_rx_calc_noise(struct iwl_priv *priv)
{
struct statistics_rx_non_phy *rx_info
= &(priv->statistics.rx.general);
int num_active_rx = 0;
int total_silence = 0;
int bcn_silence_a =
le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER;
int bcn_silence_b =
le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER;
int bcn_silence_c =
le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER;
if (bcn_silence_a) {
total_silence += bcn_silence_a;
num_active_rx++;
}
if (bcn_silence_b) {
total_silence += bcn_silence_b;
num_active_rx++;
}
if (bcn_silence_c) {
total_silence += bcn_silence_c;
num_active_rx++;
}
/* Average among active antennas */
if (num_active_rx)
priv->last_rx_noise = (total_silence / num_active_rx) - 107;
else
priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
IWL_DEBUG_CALIB("inband silence a %u, b %u, c %u, dBm %d\n",
bcn_silence_a, bcn_silence_b, bcn_silence_c,
priv->last_rx_noise);
}
void iwl4965_hw_rx_statistics(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
int change;
s32 temp;
IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n",
(int)sizeof(priv->statistics), pkt->len);
change = ((priv->statistics.general.temperature !=
pkt->u.stats.general.temperature) ||
((priv->statistics.flag &
STATISTICS_REPLY_FLG_FAT_MODE_MSK) !=
(pkt->u.stats.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK)));
memcpy(&priv->statistics, &pkt->u.stats, sizeof(priv->statistics));
set_bit(STATUS_STATISTICS, &priv->status);
/* Reschedule the statistics timer to occur in
* REG_RECALIB_PERIOD seconds to ensure we get a
* thermal update even if the uCode doesn't give
* us one */
mod_timer(&priv->statistics_periodic, jiffies +
msecs_to_jiffies(REG_RECALIB_PERIOD * 1000));
if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
(pkt->hdr.cmd == STATISTICS_NOTIFICATION)) {
iwl4965_rx_calc_noise(priv);
#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
queue_work(priv->workqueue, &priv->sensitivity_work);
#endif
}
iwl_leds_background(priv);
/* If the hardware hasn't reported a change in
* temperature then don't bother computing a
* calibrated temperature value */
if (!change)
return;
temp = iwl4965_get_temperature(priv);
if (temp < 0)
return;
if (priv->temperature != temp) {
if (priv->temperature)
IWL_DEBUG_TEMP("Temperature changed "
"from %dC to %dC\n",
KELVIN_TO_CELSIUS(priv->temperature),
KELVIN_TO_CELSIUS(temp));
else
IWL_DEBUG_TEMP("Temperature "
"initialized to %dC\n",
KELVIN_TO_CELSIUS(temp));
}
priv->temperature = temp;
set_bit(STATUS_TEMPERATURE, &priv->status);
if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
iwl4965_is_temp_calib_needed(priv))
queue_work(priv->workqueue, &priv->txpower_work);
}
static void iwl4965_add_radiotap(struct iwl_priv *priv,
struct sk_buff *skb,
struct iwl4965_rx_phy_res *rx_start,
struct ieee80211_rx_status *stats,
u32 ampdu_status)
{
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-08 17:15:40 +00:00
s8 signal = stats->signal;
s8 noise = 0;
int rate = stats->rate_idx;
u64 tsf = stats->mactime;
__le16 antenna;
__le16 phy_flags_hw = rx_start->phy_flags;
struct iwl4965_rt_rx_hdr {
struct ieee80211_radiotap_header rt_hdr;
__le64 rt_tsf; /* TSF */
u8 rt_flags; /* radiotap packet flags */
u8 rt_rate; /* rate in 500kb/s */
__le16 rt_channelMHz; /* channel in MHz */
__le16 rt_chbitmask; /* channel bitfield */
s8 rt_dbmsignal; /* signal in dBm, kluged to signed */
s8 rt_dbmnoise;
u8 rt_antenna; /* antenna number */
} __attribute__ ((packed)) *iwl4965_rt;
/* TODO: We won't have enough headroom for HT frames. Fix it later. */
if (skb_headroom(skb) < sizeof(*iwl4965_rt)) {
if (net_ratelimit())
printk(KERN_ERR "not enough headroom [%d] for "
"radiotap head [%zd]\n",
skb_headroom(skb), sizeof(*iwl4965_rt));
return;
}
/* put radiotap header in front of 802.11 header and data */
iwl4965_rt = (void *)skb_push(skb, sizeof(*iwl4965_rt));
/* initialise radiotap header */
iwl4965_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
iwl4965_rt->rt_hdr.it_pad = 0;
/* total header + data */
put_unaligned(cpu_to_le16(sizeof(*iwl4965_rt)),
&iwl4965_rt->rt_hdr.it_len);
/* Indicate all the fields we add to the radiotap header */
put_unaligned(cpu_to_le32((1 << IEEE80211_RADIOTAP_TSFT) |
(1 << IEEE80211_RADIOTAP_FLAGS) |
(1 << IEEE80211_RADIOTAP_RATE) |
(1 << IEEE80211_RADIOTAP_CHANNEL) |
(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) |
(1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) |
(1 << IEEE80211_RADIOTAP_ANTENNA)),
&iwl4965_rt->rt_hdr.it_present);
/* Zero the flags, we'll add to them as we go */
iwl4965_rt->rt_flags = 0;
put_unaligned(cpu_to_le64(tsf), &iwl4965_rt->rt_tsf);
iwl4965_rt->rt_dbmsignal = signal;
iwl4965_rt->rt_dbmnoise = noise;
/* Convert the channel frequency and set the flags */
put_unaligned(cpu_to_le16(stats->freq), &iwl4965_rt->rt_channelMHz);
if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK))
put_unaligned(cpu_to_le16(IEEE80211_CHAN_OFDM |
IEEE80211_CHAN_5GHZ),
&iwl4965_rt->rt_chbitmask);
else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK)
put_unaligned(cpu_to_le16(IEEE80211_CHAN_CCK |
IEEE80211_CHAN_2GHZ),
&iwl4965_rt->rt_chbitmask);
else /* 802.11g */
put_unaligned(cpu_to_le16(IEEE80211_CHAN_OFDM |
IEEE80211_CHAN_2GHZ),
&iwl4965_rt->rt_chbitmask);
if (rate == -1)
iwl4965_rt->rt_rate = 0;
else
iwl4965_rt->rt_rate = iwl4965_rates[rate].ieee;
/*
* "antenna number"
*
* It seems that the antenna field in the phy flags value
* is actually a bitfield. This is undefined by radiotap,
* it wants an actual antenna number but I always get "7"
* for most legacy frames I receive indicating that the
* same frame was received on all three RX chains.
*
* I think this field should be removed in favour of a
* new 802.11n radiotap field "RX chains" that is defined
* as a bitmask.
*/
antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK;
iwl4965_rt->rt_antenna = le16_to_cpu(antenna) >> 4;
/* set the preamble flag if appropriate */
if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
iwl4965_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
stats->flag |= RX_FLAG_RADIOTAP;
}
static void iwl_update_rx_stats(struct iwl_priv *priv, u16 fc, u16 len)
{
/* 0 - mgmt, 1 - cnt, 2 - data */
int idx = (fc & IEEE80211_FCTL_FTYPE) >> 2;
priv->rx_stats[idx].cnt++;
priv->rx_stats[idx].bytes += len;
}
/*
* returns non-zero if packet should be dropped
*/
static int iwl4965_set_decrypted_flag(struct iwl_priv *priv,
struct ieee80211_hdr *hdr,
u32 decrypt_res,
struct ieee80211_rx_status *stats)
{
u16 fc = le16_to_cpu(hdr->frame_control);
if (priv->active_rxon.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK)
return 0;
if (!(fc & IEEE80211_FCTL_PROTECTED))
return 0;
IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res);
switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) {
case RX_RES_STATUS_SEC_TYPE_TKIP:
/* The uCode has got a bad phase 1 Key, pushes the packet.
* Decryption will be done in SW. */
if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
RX_RES_STATUS_BAD_KEY_TTAK)
break;
if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
RX_RES_STATUS_BAD_ICV_MIC) {
/* bad ICV, the packet is destroyed since the
* decryption is inplace, drop it */
IWL_DEBUG_RX("Packet destroyed\n");
return -1;
}
case RX_RES_STATUS_SEC_TYPE_WEP:
case RX_RES_STATUS_SEC_TYPE_CCMP:
if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
RX_RES_STATUS_DECRYPT_OK) {
IWL_DEBUG_RX("hw decrypt successfully!!!\n");
stats->flag |= RX_FLAG_DECRYPTED;
}
break;
default:
break;
}
return 0;
}
static u32 iwl4965_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in)
{
u32 decrypt_out = 0;
if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
RX_RES_STATUS_STATION_FOUND)
decrypt_out |= (RX_RES_STATUS_STATION_FOUND |
RX_RES_STATUS_NO_STATION_INFO_MISMATCH);
decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);
/* packet was not encrypted */
if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
RX_RES_STATUS_SEC_TYPE_NONE)
return decrypt_out;
/* packet was encrypted with unknown alg */
if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
RX_RES_STATUS_SEC_TYPE_ERR)
return decrypt_out;
/* decryption was not done in HW */
if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
RX_MPDU_RES_STATUS_DEC_DONE_MSK)
return decrypt_out;
switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {
case RX_RES_STATUS_SEC_TYPE_CCMP:
/* alg is CCM: check MIC only */
if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
/* Bad MIC */
decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
else
decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
break;
case RX_RES_STATUS_SEC_TYPE_TKIP:
if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
/* Bad TTAK */
decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
break;
}
/* fall through if TTAK OK */
default:
if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
else
decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
break;
};
IWL_DEBUG_RX("decrypt_in:0x%x decrypt_out = 0x%x\n",
decrypt_in, decrypt_out);
return decrypt_out;
}
static void iwl4965_handle_data_packet(struct iwl_priv *priv, int is_data,
int include_phy,
struct iwl_rx_mem_buffer *rxb,
struct ieee80211_rx_status *stats)
{
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
struct iwl4965_rx_phy_res *rx_start = (include_phy) ?
(struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) : NULL;
struct ieee80211_hdr *hdr;
u16 len;
__le32 *rx_end;
unsigned int skblen;
u32 ampdu_status;
u32 ampdu_status_legacy;
if (!include_phy && priv->last_phy_res[0])
rx_start = (struct iwl4965_rx_phy_res *)&priv->last_phy_res[1];
if (!rx_start) {
IWL_ERROR("MPDU frame without a PHY data\n");
return;
}
if (include_phy) {
hdr = (struct ieee80211_hdr *)((u8 *) & rx_start[1] +
rx_start->cfg_phy_cnt);
len = le16_to_cpu(rx_start->byte_count);
rx_end = (__le32 *) ((u8 *) & pkt->u.raw[0] +
sizeof(struct iwl4965_rx_phy_res) +
rx_start->cfg_phy_cnt + len);
} else {
struct iwl4965_rx_mpdu_res_start *amsdu =
(struct iwl4965_rx_mpdu_res_start *)pkt->u.raw;
hdr = (struct ieee80211_hdr *)(pkt->u.raw +
sizeof(struct iwl4965_rx_mpdu_res_start));
len = le16_to_cpu(amsdu->byte_count);
rx_start->byte_count = amsdu->byte_count;
rx_end = (__le32 *) (((u8 *) hdr) + len);
}
/* In monitor mode allow 802.11 ACk frames (10 bytes) */
if (len > priv->hw_params.max_pkt_size ||
len < ((priv->iw_mode == IEEE80211_IF_TYPE_MNTR) ? 10 : 16)) {
IWL_WARNING("byte count out of range [16,4K] : %d\n", len);
return;
}
ampdu_status = le32_to_cpu(*rx_end);
skblen = ((u8 *) rx_end - (u8 *) & pkt->u.raw[0]) + sizeof(u32);
if (!include_phy) {
/* New status scheme, need to translate */
ampdu_status_legacy = ampdu_status;
ampdu_status = iwl4965_translate_rx_status(priv, ampdu_status);
}
/* start from MAC */
skb_reserve(rxb->skb, (void *)hdr - (void *)pkt);
skb_put(rxb->skb, len); /* end where data ends */
/* We only process data packets if the interface is open */
if (unlikely(!priv->is_open)) {
IWL_DEBUG_DROP_LIMIT
("Dropping packet while interface is not open.\n");
return;
}
stats->flag = 0;
hdr = (struct ieee80211_hdr *)rxb->skb->data;
/* in case of HW accelerated crypto and bad decryption, drop */
if (!priv->hw_params.sw_crypto &&
iwl4965_set_decrypted_flag(priv, hdr, ampdu_status, stats))
return;
if (priv->add_radiotap)
iwl4965_add_radiotap(priv, rxb->skb, rx_start, stats, ampdu_status);
iwl_update_rx_stats(priv, le16_to_cpu(hdr->frame_control), len);
ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats);
priv->alloc_rxb_skb--;
rxb->skb = NULL;
}
/* Calc max signal level (dBm) among 3 possible receivers */
static int iwl4965_calc_rssi(struct iwl_priv *priv,
struct iwl4965_rx_phy_res *rx_resp)
{
/* data from PHY/DSP regarding signal strength, etc.,
* contents are always there, not configurable by host. */
struct iwl4965_rx_non_cfg_phy *ncphy =
(struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy;
u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL_AGC_DB_MASK)
>> IWL_AGC_DB_POS;
u32 valid_antennae =
(le16_to_cpu(rx_resp->phy_flags) & RX_PHY_FLAGS_ANTENNAE_MASK)
>> RX_PHY_FLAGS_ANTENNAE_OFFSET;
u8 max_rssi = 0;
u32 i;
/* Find max rssi among 3 possible receivers.
* These values are measured by the digital signal processor (DSP).
* They should stay fairly constant even as the signal strength varies,
* if the radio's automatic gain control (AGC) is working right.
* AGC value (see below) will provide the "interesting" info. */
for (i = 0; i < 3; i++)
if (valid_antennae & (1 << i))
max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
max_rssi, agc);
/* dBm = max_rssi dB - agc dB - constant.
* Higher AGC (higher radio gain) means lower signal. */
return (max_rssi - agc - IWL_RSSI_OFFSET);
}
static void iwl4965_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id)
{
unsigned long flags;
spin_lock_irqsave(&priv->sta_lock, flags);
priv->stations[sta_id].sta.station_flags &= ~STA_FLG_PWR_SAVE_MSK;
priv->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK;
priv->stations[sta_id].sta.sta.modify_mask = 0;
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
spin_unlock_irqrestore(&priv->sta_lock, flags);
iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
}
static void iwl4965_update_ps_mode(struct iwl_priv *priv, u16 ps_bit, u8 *addr)
{
/* FIXME: need locking over ps_status ??? */
u8 sta_id = iwl_find_station(priv, addr);
if (sta_id != IWL_INVALID_STATION) {
u8 sta_awake = priv->stations[sta_id].
ps_status == STA_PS_STATUS_WAKE;
if (sta_awake && ps_bit)
priv->stations[sta_id].ps_status = STA_PS_STATUS_SLEEP;
else if (!sta_awake && !ps_bit) {
iwl4965_sta_modify_ps_wake(priv, sta_id);
priv->stations[sta_id].ps_status = STA_PS_STATUS_WAKE;
}
}
}
#ifdef CONFIG_IWLWIFI_DEBUG
/**
* iwl4965_dbg_report_frame - dump frame to syslog during debug sessions
*
* You may hack this function to show different aspects of received frames,
* including selective frame dumps.
* group100 parameter selects whether to show 1 out of 100 good frames.
*
* TODO: This was originally written for 3945, need to audit for
* proper operation with 4965.
*/
static void iwl4965_dbg_report_frame(struct iwl_priv *priv,
struct iwl_rx_packet *pkt,
struct ieee80211_hdr *header, int group100)
{
u32 to_us;
u32 print_summary = 0;
u32 print_dump = 0; /* set to 1 to dump all frames' contents */
u32 hundred = 0;
u32 dataframe = 0;
u16 fc;
u16 seq_ctl;
u16 channel;
u16 phy_flags;
int rate_sym;
u16 length;
u16 status;
u16 bcn_tmr;
u32 tsf_low;
u64 tsf;
u8 rssi;
u8 agc;
u16 sig_avg;
u16 noise_diff;
struct iwl4965_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
struct iwl4965_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
struct iwl4965_rx_frame_end *rx_end = IWL_RX_END(pkt);
u8 *data = IWL_RX_DATA(pkt);
if (likely(!(priv->debug_level & IWL_DL_RX)))
return;
/* MAC header */
fc = le16_to_cpu(header->frame_control);
seq_ctl = le16_to_cpu(header->seq_ctrl);
/* metadata */
channel = le16_to_cpu(rx_hdr->channel);
phy_flags = le16_to_cpu(rx_hdr->phy_flags);
rate_sym = rx_hdr->rate;
length = le16_to_cpu(rx_hdr->len);
/* end-of-frame status and timestamp */
status = le32_to_cpu(rx_end->status);
bcn_tmr = le32_to_cpu(rx_end->beacon_timestamp);
tsf_low = le64_to_cpu(rx_end->timestamp) & 0x0ffffffff;
tsf = le64_to_cpu(rx_end->timestamp);
/* signal statistics */
rssi = rx_stats->rssi;
agc = rx_stats->agc;
sig_avg = le16_to_cpu(rx_stats->sig_avg);
noise_diff = le16_to_cpu(rx_stats->noise_diff);
to_us = !compare_ether_addr(header->addr1, priv->mac_addr);
/* if data frame is to us and all is good,
* (optionally) print summary for only 1 out of every 100 */
if (to_us && (fc & ~IEEE80211_FCTL_PROTECTED) ==
(IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) {
dataframe = 1;
if (!group100)
print_summary = 1; /* print each frame */
else if (priv->framecnt_to_us < 100) {
priv->framecnt_to_us++;
print_summary = 0;
} else {
priv->framecnt_to_us = 0;
print_summary = 1;
hundred = 1;
}
} else {
/* print summary for all other frames */
print_summary = 1;
}
if (print_summary) {
char *title;
int rate_idx;
u32 bitrate;
if (hundred)
title = "100Frames";
else if (fc & IEEE80211_FCTL_RETRY)
title = "Retry";
else if (ieee80211_is_assoc_response(fc))
title = "AscRsp";
else if (ieee80211_is_reassoc_response(fc))
title = "RasRsp";
else if (ieee80211_is_probe_response(fc)) {
title = "PrbRsp";
print_dump = 1; /* dump frame contents */
} else if (ieee80211_is_beacon(fc)) {
title = "Beacon";
print_dump = 1; /* dump frame contents */
} else if (ieee80211_is_atim(fc))
title = "ATIM";
else if (ieee80211_is_auth(fc))
title = "Auth";
else if (ieee80211_is_deauth(fc))
title = "DeAuth";
else if (ieee80211_is_disassoc(fc))
title = "DisAssoc";
else
title = "Frame";
rate_idx = iwl4965_hwrate_to_plcp_idx(rate_sym);
if (unlikely(rate_idx == -1))
bitrate = 0;
else
bitrate = iwl4965_rates[rate_idx].ieee / 2;
/* print frame summary.
* MAC addresses show just the last byte (for brevity),
* but you can hack it to show more, if you'd like to. */
if (dataframe)
IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, "
"len=%u, rssi=%d, chnl=%d, rate=%u, \n",
title, fc, header->addr1[5],
length, rssi, channel, bitrate);
else {
/* src/dst addresses assume managed mode */
IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, "
"src=0x%02x, rssi=%u, tim=%lu usec, "
"phy=0x%02x, chnl=%d\n",
title, fc, header->addr1[5],
header->addr3[5], rssi,
tsf_low - priv->scan_start_tsf,
phy_flags, channel);
}
}
if (print_dump)
iwl_print_hex_dump(priv, IWL_DL_RX, data, length);
}
#else
static inline void iwl4965_dbg_report_frame(struct iwl_priv *priv,
struct iwl_rx_packet *pkt,
struct ieee80211_hdr *header,
int group100)
{
}
#endif
/* Called for REPLY_RX (legacy ABG frames), or
* REPLY_RX_MPDU_CMD (HT high-throughput N frames). */
static void iwl4965_rx_reply_rx(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
struct ieee80211_hdr *header;
struct ieee80211_rx_status rx_status;
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
/* Use phy data (Rx signal strength, etc.) contained within
* this rx packet for legacy frames,
* or phy data cached from REPLY_RX_PHY_CMD for HT frames. */
int include_phy = (pkt->hdr.cmd == REPLY_RX);
struct iwl4965_rx_phy_res *rx_start = (include_phy) ?
(struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) :
(struct iwl4965_rx_phy_res *)&priv->last_phy_res[1];
__le32 *rx_end;
unsigned int len = 0;
u16 fc;
u8 network_packet;
rx_status.mactime = le64_to_cpu(rx_start->timestamp);
rx_status.freq =
ieee80211_channel_to_frequency(le16_to_cpu(rx_start->channel));
rx_status.band = (rx_start->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
rx_status.rate_idx =
iwl4965_hwrate_to_plcp_idx(le32_to_cpu(rx_start->rate_n_flags));
if (rx_status.band == IEEE80211_BAND_5GHZ)
rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
rx_status.antenna = 0;
rx_status.flag = 0;
if ((unlikely(rx_start->cfg_phy_cnt > 20))) {
IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n",
rx_start->cfg_phy_cnt);
return;
}
if (!include_phy) {
if (priv->last_phy_res[0])
rx_start = (struct iwl4965_rx_phy_res *)
&priv->last_phy_res[1];
else
rx_start = NULL;
}
if (!rx_start) {
IWL_ERROR("MPDU frame without a PHY data\n");
return;
}
if (include_phy) {
header = (struct ieee80211_hdr *)((u8 *) & rx_start[1]
+ rx_start->cfg_phy_cnt);
len = le16_to_cpu(rx_start->byte_count);
rx_end = (__le32 *)(pkt->u.raw + rx_start->cfg_phy_cnt +
sizeof(struct iwl4965_rx_phy_res) + len);
} else {
struct iwl4965_rx_mpdu_res_start *amsdu =
(struct iwl4965_rx_mpdu_res_start *)pkt->u.raw;
header = (void *)(pkt->u.raw +
sizeof(struct iwl4965_rx_mpdu_res_start));
len = le16_to_cpu(amsdu->byte_count);
rx_end = (__le32 *) (pkt->u.raw +
sizeof(struct iwl4965_rx_mpdu_res_start) + len);
}
if (!(*rx_end & RX_RES_STATUS_NO_CRC32_ERROR) ||
!(*rx_end & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n",
le32_to_cpu(*rx_end));
return;
}
priv->ucode_beacon_time = le32_to_cpu(rx_start->beacon_time_stamp);
/* Find max signal strength (dBm) among 3 antenna/receiver chains */
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-08 17:15:40 +00:00
rx_status.signal = iwl4965_calc_rssi(priv, rx_start);
/* Meaningful noise values are available only from beacon statistics,
* which are gathered only when associated, and indicate noise
* only for the associated network channel ...
* Ignore these noise values while scanning (other channels) */
if (iwl_is_associated(priv) &&
!test_bit(STATUS_SCANNING, &priv->status)) {
rx_status.noise = priv->last_rx_noise;
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-08 17:15:40 +00:00
rx_status.qual = iwl4965_calc_sig_qual(rx_status.signal,
rx_status.noise);
} else {
rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-08 17:15:40 +00:00
rx_status.qual = iwl4965_calc_sig_qual(rx_status.signal, 0);
}
/* Reset beacon noise level if not associated. */
if (!iwl_is_associated(priv))
priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
/* Set "1" to report good data frames in groups of 100 */
/* FIXME: need to optimze the call: */
iwl4965_dbg_report_frame(priv, pkt, header, 1);
IWL_DEBUG_STATS_LIMIT("Rssi %d, noise %d, qual %d, TSF %llu\n",
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-08 17:15:40 +00:00
rx_status.signal, rx_status.noise, rx_status.signal,
(unsigned long long)rx_status.mactime);
if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
iwl4965_handle_data_packet(priv, 1, include_phy,
rxb, &rx_status);
return;
}
network_packet = iwl4965_is_network_packet(priv, header);
if (network_packet) {
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-08 17:15:40 +00:00
priv->last_rx_rssi = rx_status.signal;
priv->last_beacon_time = priv->ucode_beacon_time;
priv->last_tsf = le64_to_cpu(rx_start->timestamp);
}
fc = le16_to_cpu(header->frame_control);
switch (fc & IEEE80211_FCTL_FTYPE) {
case IEEE80211_FTYPE_MGMT:
if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
iwl4965_update_ps_mode(priv, fc & IEEE80211_FCTL_PM,
header->addr2);
iwl4965_handle_data_packet(priv, 0, include_phy, rxb, &rx_status);
break;
case IEEE80211_FTYPE_CTL:
#ifdef CONFIG_IWL4965_HT
switch (fc & IEEE80211_FCTL_STYPE) {
case IEEE80211_STYPE_BACK_REQ:
IWL_DEBUG_HT("IEEE80211_STYPE_BACK_REQ arrived\n");
iwl4965_handle_data_packet(priv, 0, include_phy,
rxb, &rx_status);
break;
default:
break;
}
#endif
break;
case IEEE80211_FTYPE_DATA: {
DECLARE_MAC_BUF(mac1);
DECLARE_MAC_BUF(mac2);
DECLARE_MAC_BUF(mac3);
if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
iwl4965_update_ps_mode(priv, fc & IEEE80211_FCTL_PM,
header->addr2);
if (unlikely(!network_packet))
IWL_DEBUG_DROP("Dropping (non network): "
"%s, %s, %s\n",
print_mac(mac1, header->addr1),
print_mac(mac2, header->addr2),
print_mac(mac3, header->addr3));
else if (unlikely(iwl4965_is_duplicate_packet(priv, header)))
IWL_DEBUG_DROP("Dropping (dup): %s, %s, %s\n",
print_mac(mac1, header->addr1),
print_mac(mac2, header->addr2),
print_mac(mac3, header->addr3));
else
iwl4965_handle_data_packet(priv, 1, include_phy, rxb,
&rx_status);
break;
}
default:
break;
}
}
/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
* This will be used later in iwl4965_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
static void iwl4965_rx_reply_rx_phy(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
priv->last_phy_res[0] = 1;
memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]),
sizeof(struct iwl4965_rx_phy_res));
}
static void iwl4965_rx_missed_beacon_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
struct iwl4965_missed_beacon_notif *missed_beacon;
missed_beacon = &pkt->u.missed_beacon;
if (le32_to_cpu(missed_beacon->consequtive_missed_beacons) > 5) {
IWL_DEBUG_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n",
le32_to_cpu(missed_beacon->consequtive_missed_beacons),
le32_to_cpu(missed_beacon->total_missed_becons),
le32_to_cpu(missed_beacon->num_recvd_beacons),
le32_to_cpu(missed_beacon->num_expected_beacons));
if (!test_bit(STATUS_SCANNING, &priv->status))
iwl_init_sensitivity(priv);
}
#endif /*CONFIG_IWL4965_RUN_TIME_CALIB*/
}
#ifdef CONFIG_IWL4965_HT
/**
* iwl4965_sta_modify_enable_tid_tx - Enable Tx for this TID in station table
*/
static void iwl4965_sta_modify_enable_tid_tx(struct iwl_priv *priv,
int sta_id, int tid)
{
unsigned long flags;
/* Remove "disable" flag, to enable Tx for this TID */
spin_lock_irqsave(&priv->sta_lock, flags);
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX;
priv->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid));
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
spin_unlock_irqrestore(&priv->sta_lock, flags);
iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
}
/**
* iwl4965_tx_status_reply_compressed_ba - Update tx status from block-ack
*
* Go through block-ack's bitmap of ACK'd frames, update driver's record of
* ACK vs. not. This gets sent to mac80211, then to rate scaling algo.
*/
static int iwl4965_tx_status_reply_compressed_ba(struct iwl_priv *priv,
struct iwl_ht_agg *agg,
struct iwl4965_compressed_ba_resp*
ba_resp)
{
int i, sh, ack;
u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl);
u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
u64 bitmap;
int successes = 0;
struct ieee80211_tx_status *tx_status;
if (unlikely(!agg->wait_for_ba)) {
IWL_ERROR("Received BA when not expected\n");
return -EINVAL;
}
/* Mark that the expected block-ack response arrived */
agg->wait_for_ba = 0;
IWL_DEBUG_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->seq_ctl);
/* Calculate shift to align block-ack bits with our Tx window bits */
sh = agg->start_idx - SEQ_TO_INDEX(seq_ctl>>4);
if (sh < 0) /* tbw something is wrong with indices */
sh += 0x100;
/* don't use 64-bit values for now */
bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
if (agg->frame_count > (64 - sh)) {
IWL_DEBUG_TX_REPLY("more frames than bitmap size");
return -1;
}
/* check for success or failure according to the
* transmitted bitmap and block-ack bitmap */
bitmap &= agg->bitmap;
/* For each frame attempted in aggregation,
* update driver's record of tx frame's status. */
for (i = 0; i < agg->frame_count ; i++) {
ack = bitmap & (1 << i);
successes += !!ack;
IWL_DEBUG_TX_REPLY("%s ON i=%d idx=%d raw=%d\n",
ack? "ACK":"NACK", i, (agg->start_idx + i) & 0xff,
agg->start_idx + i);
}
tx_status = &priv->txq[scd_flow].txb[agg->start_idx].status;
tx_status->flags = IEEE80211_TX_STATUS_ACK;
tx_status->flags |= IEEE80211_TX_STATUS_AMPDU;
tx_status->ampdu_ack_map = successes;
tx_status->ampdu_ack_len = agg->frame_count;
iwl4965_hwrate_to_tx_control(priv, agg->rate_n_flags,
&tx_status->control);
wireless: correct warnings from using '%llx' for type 'u64' drivers/net/wireless/ath5k/debug.c: In function 'read_file_tsf': drivers/net/wireless/ath5k/debug.c:203: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/debug.c:203: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/debug.c: In function 'read_file_beacon': drivers/net/wireless/ath5k/debug.c:274: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/debug.c:274: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/iwlwifi/iwl-4965.c: In function 'iwl4965_tx_status_reply_compressed_ba': drivers/net/wireless/iwlwifi/iwl-4965.c:3907: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/iwlwifi/iwl-4965.c: In function 'iwl4965_rx_reply_compressed_ba': drivers/net/wireless/iwlwifi/iwl-4965.c:4039: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type '__le64' drivers/net/wireless/iwlwifi/iwl-4965.c:4046: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' drivers/net/wireless/iwlwifi/iwl4965-base.c: In function 'iwl4965_tx_status_reply_tx': drivers/net/wireless/iwlwifi/iwl4965-base.c:3661: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64' Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-07 21:38:43 +00:00
IWL_DEBUG_TX_REPLY("Bitmap %llx\n", (unsigned long long)bitmap);
return 0;
}
/**
* iwl4965_tx_queue_stop_scheduler - Stop queue, but keep configuration
*/
static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv,
u16 txq_id)
{
/* Simply stop the queue, but don't change any configuration;
* the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
iwl_write_prph(priv,
IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
(0 << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE)|
(1 << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
}
/**
* txq_id must be greater than IWL_BACK_QUEUE_FIRST_ID
* priv->lock must be held by the caller
*/
static int iwl4965_tx_queue_agg_disable(struct iwl_priv *priv, u16 txq_id,
u16 ssn_idx, u8 tx_fifo)
{
int ret = 0;
if (IWL_BACK_QUEUE_FIRST_ID > txq_id) {
IWL_WARNING("queue number too small: %d, must be > %d\n",
txq_id, IWL_BACK_QUEUE_FIRST_ID);
return -EINVAL;
}
ret = iwl_grab_nic_access(priv);
if (ret)
return ret;
iwl4965_tx_queue_stop_scheduler(priv, txq_id);
iwl_clear_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
/* supposes that ssn_idx is valid (!= 0xFFF) */
iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
iwl_clear_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
iwl4965_txq_ctx_deactivate(priv, txq_id);
iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
iwl_release_nic_access(priv);
return 0;
}
int iwl4965_check_empty_hw_queue(struct iwl_priv *priv, int sta_id,
u8 tid, int txq_id)
{
struct iwl_queue *q = &priv->txq[txq_id].q;
u8 *addr = priv->stations[sta_id].sta.sta.addr;
struct iwl_tid_data *tid_data = &priv->stations[sta_id].tid[tid];
switch (priv->stations[sta_id].tid[tid].agg.state) {
case IWL_EMPTYING_HW_QUEUE_DELBA:
/* We are reclaiming the last packet of the */
/* aggregated HW queue */
if (txq_id == tid_data->agg.txq_id &&
q->read_ptr == q->write_ptr) {
u16 ssn = SEQ_TO_SN(tid_data->seq_number);
int tx_fifo = default_tid_to_tx_fifo[tid];
IWL_DEBUG_HT("HW queue empty: continue DELBA flow\n");
iwl4965_tx_queue_agg_disable(priv, txq_id,
ssn, tx_fifo);
tid_data->agg.state = IWL_AGG_OFF;
ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, addr, tid);
}
break;
case IWL_EMPTYING_HW_QUEUE_ADDBA:
/* We are reclaiming the last packet of the queue */
if (tid_data->tfds_in_queue == 0) {
IWL_DEBUG_HT("HW queue empty: continue ADDBA flow\n");
tid_data->agg.state = IWL_AGG_ON;
ieee80211_start_tx_ba_cb_irqsafe(priv->hw, addr, tid);
}
break;
}
return 0;
}
/**
* iwl4965_rx_reply_compressed_ba - Handler for REPLY_COMPRESSED_BA
*
* Handles block-acknowledge notification from device, which reports success
* of frames sent via aggregation.
*/
static void iwl4965_rx_reply_compressed_ba(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
struct iwl4965_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba;
int index;
struct iwl_tx_queue *txq = NULL;
struct iwl_ht_agg *agg;
DECLARE_MAC_BUF(mac);
/* "flow" corresponds to Tx queue */
u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
/* "ssn" is start of block-ack Tx window, corresponds to index
* (in Tx queue's circular buffer) of first TFD/frame in window */
u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn);
if (scd_flow >= priv->hw_params.max_txq_num) {
IWL_ERROR("BUG_ON scd_flow is bigger than number of queues");
return;
}
txq = &priv->txq[scd_flow];
agg = &priv->stations[ba_resp->sta_id].tid[ba_resp->tid].agg;
/* Find index just before block-ack window */
index = iwl_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd);
/* TODO: Need to get this copy more safely - now good for debug */
IWL_DEBUG_TX_REPLY("REPLY_COMPRESSED_BA [%d]Received from %s, "
"sta_id = %d\n",
agg->wait_for_ba,
print_mac(mac, (u8*) &ba_resp->sta_addr_lo32),
ba_resp->sta_id);
IWL_DEBUG_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%llx, scd_flow = "
"%d, scd_ssn = %d\n",
ba_resp->tid,
ba_resp->seq_ctl,
(unsigned long long)le64_to_cpu(ba_resp->bitmap),
ba_resp->scd_flow,
ba_resp->scd_ssn);
IWL_DEBUG_TX_REPLY("DAT start_idx = %d, bitmap = 0x%llx \n",
agg->start_idx,
wireless: correct warnings from using '%llx' for type 'u64' drivers/net/wireless/ath5k/debug.c: In function 'read_file_tsf': drivers/net/wireless/ath5k/debug.c:203: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/debug.c:203: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/debug.c: In function 'read_file_beacon': drivers/net/wireless/ath5k/debug.c:274: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/debug.c:274: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/iwlwifi/iwl-4965.c: In function 'iwl4965_tx_status_reply_compressed_ba': drivers/net/wireless/iwlwifi/iwl-4965.c:3907: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/iwlwifi/iwl-4965.c: In function 'iwl4965_rx_reply_compressed_ba': drivers/net/wireless/iwlwifi/iwl-4965.c:4039: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type '__le64' drivers/net/wireless/iwlwifi/iwl-4965.c:4046: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' drivers/net/wireless/iwlwifi/iwl4965-base.c: In function 'iwl4965_tx_status_reply_tx': drivers/net/wireless/iwlwifi/iwl4965-base.c:3661: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64' Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-07 21:38:43 +00:00
(unsigned long long)agg->bitmap);
/* Update driver's record of ACK vs. not for each frame in window */
iwl4965_tx_status_reply_compressed_ba(priv, agg, ba_resp);
/* Release all TFDs before the SSN, i.e. all TFDs in front of
* block-ack window (we assume that they've been successfully
* transmitted ... if not, it's too late anyway). */
if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) {
/* calculate mac80211 ampdu sw queue to wake */
int ampdu_q =
scd_flow - IWL_BACK_QUEUE_FIRST_ID + priv->hw->queues;
int freed = iwl4965_tx_queue_reclaim(priv, scd_flow, index);
priv->stations[ba_resp->sta_id].
tid[ba_resp->tid].tfds_in_queue -= freed;
if (iwl_queue_space(&txq->q) > txq->q.low_mark &&
priv->mac80211_registered &&
agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)
ieee80211_wake_queue(priv->hw, ampdu_q);
iwl4965_check_empty_hw_queue(priv, ba_resp->sta_id,
ba_resp->tid, scd_flow);
}
}
/**
* iwl4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue
*/
static int iwl4965_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid,
u16 txq_id)
{
u32 tbl_dw_addr;
u32 tbl_dw;
u16 scd_q2ratid;
scd_q2ratid = ra_tid & IWL49_SCD_QUEUE_RA_TID_MAP_RATID_MSK;
tbl_dw_addr = priv->scd_base_addr +
IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr);
if (txq_id & 0x1)
tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
else
tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
iwl_write_targ_mem(priv, tbl_dw_addr, tbl_dw);
return 0;
}
/**
* iwl4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue
*
* NOTE: txq_id must be greater than IWL_BACK_QUEUE_FIRST_ID,
* i.e. it must be one of the higher queues used for aggregation
*/
static int iwl4965_tx_queue_agg_enable(struct iwl_priv *priv, int txq_id,
int tx_fifo, int sta_id, int tid,
u16 ssn_idx)
{
unsigned long flags;
int rc;
u16 ra_tid;
if (IWL_BACK_QUEUE_FIRST_ID > txq_id)
IWL_WARNING("queue number too small: %d, must be > %d\n",
txq_id, IWL_BACK_QUEUE_FIRST_ID);
ra_tid = BUILD_RAxTID(sta_id, tid);
/* Modify device's station table to Tx this TID */
iwl4965_sta_modify_enable_tid_tx(priv, sta_id, tid);
spin_lock_irqsave(&priv->lock, flags);
rc = iwl_grab_nic_access(priv);
if (rc) {
spin_unlock_irqrestore(&priv->lock, flags);
return rc;
}
/* Stop this Tx queue before configuring it */
iwl4965_tx_queue_stop_scheduler(priv, txq_id);
/* Map receiver-address / traffic-ID to this queue */
iwl4965_tx_queue_set_q2ratid(priv, ra_tid, txq_id);
/* Set this queue as a chain-building queue */
iwl_set_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
/* Place first TFD at index corresponding to start sequence number.
* Assumes that ssn_idx is valid (!= 0xFFF) */
priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
/* Set up Tx window size and frame limit for this queue */
iwl_write_targ_mem(priv,
priv->scd_base_addr + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id),
(SCD_WIN_SIZE << IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
iwl_write_targ_mem(priv, priv->scd_base_addr +
IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32),
(SCD_FRAME_LIMIT << IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS)
& IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
iwl_set_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
/* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
iwl_release_nic_access(priv);
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
#endif /* CONFIG_IWL4965_HT */
/**
* iwl4965_add_station - Initialize a station's hardware rate table
*
* The uCode's station table contains a table of fallback rates
* for automatic fallback during transmission.
*
* NOTE: This sets up a default set of values. These will be replaced later
* if the driver's iwl-4965-rs rate scaling algorithm is used, instead of
* rc80211_simple.
*
* NOTE: Run REPLY_ADD_STA command to set up station table entry, before
* calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
* which requires station table entry to exist).
*/
void iwl4965_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap)
{
int i, r;
struct iwl_link_quality_cmd link_cmd = {
.reserved1 = 0,
};
u16 rate_flags;
/* Set up the rate scaling to start at selected rate, fall back
* all the way down to 1M in IEEE order, and then spin on 1M */
if (is_ap)
r = IWL_RATE_54M_INDEX;
else if (priv->band == IEEE80211_BAND_5GHZ)
r = IWL_RATE_6M_INDEX;
else
r = IWL_RATE_1M_INDEX;
for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
rate_flags = 0;
if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE)
rate_flags |= RATE_MCS_CCK_MSK;
/* Use Tx antenna B only */
rate_flags |= RATE_MCS_ANT_B_MSK; /*FIXME:RS*/
link_cmd.rs_table[i].rate_n_flags =
iwl4965_hw_set_rate_n_flags(iwl4965_rates[r].plcp, rate_flags);
r = iwl4965_get_prev_ieee_rate(r);
}
link_cmd.general_params.single_stream_ant_msk = 2;
link_cmd.general_params.dual_stream_ant_msk = 3;
link_cmd.agg_params.agg_dis_start_th = 3;
link_cmd.agg_params.agg_time_limit = cpu_to_le16(4000);
/* Update the rate scaling for control frame Tx to AP */
link_cmd.sta_id = is_ap ? IWL_AP_ID : priv->hw_params.bcast_sta_id;
iwl_send_cmd_pdu_async(priv, REPLY_TX_LINK_QUALITY_CMD,
sizeof(link_cmd), &link_cmd, NULL);
}
#ifdef CONFIG_IWL4965_HT
void iwl4965_set_ht_add_station(struct iwl_priv *priv, u8 index,
struct ieee80211_ht_info *sta_ht_inf)
{
__le32 sta_flags;
u8 mimo_ps_mode;
if (!sta_ht_inf || !sta_ht_inf->ht_supported)
goto done;
mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2;
sta_flags = priv->stations[index].sta.station_flags;
sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK);
switch (mimo_ps_mode) {
case WLAN_HT_CAP_MIMO_PS_STATIC:
sta_flags |= STA_FLG_MIMO_DIS_MSK;
break;
case WLAN_HT_CAP_MIMO_PS_DYNAMIC:
sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK;
break;
case WLAN_HT_CAP_MIMO_PS_DISABLED:
break;
default:
IWL_WARNING("Invalid MIMO PS mode %d", mimo_ps_mode);
break;
}
sta_flags |= cpu_to_le32(
(u32)sta_ht_inf->ampdu_factor << STA_FLG_MAX_AGG_SIZE_POS);
sta_flags |= cpu_to_le32(
(u32)sta_ht_inf->ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS);
if (iwl_is_fat_tx_allowed(priv, sta_ht_inf))
sta_flags |= STA_FLG_FAT_EN_MSK;
else
sta_flags &= ~STA_FLG_FAT_EN_MSK;
priv->stations[index].sta.station_flags = sta_flags;
done:
return;
}
static int iwl4965_rx_agg_start(struct iwl_priv *priv,
const u8 *addr, int tid, u16 ssn)
{
unsigned long flags;
int sta_id;
sta_id = iwl_find_station(priv, addr);
if (sta_id == IWL_INVALID_STATION)
return -ENXIO;
spin_lock_irqsave(&priv->sta_lock, flags);
priv->stations[sta_id].sta.station_flags_msk = 0;
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK;
priv->stations[sta_id].sta.add_immediate_ba_tid = (u8)tid;
priv->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn);
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
spin_unlock_irqrestore(&priv->sta_lock, flags);
return iwl_send_add_sta(priv, &priv->stations[sta_id].sta,
CMD_ASYNC);
}
static int iwl4965_rx_agg_stop(struct iwl_priv *priv,
const u8 *addr, int tid)
{
unsigned long flags;
int sta_id;
sta_id = iwl_find_station(priv, addr);
if (sta_id == IWL_INVALID_STATION)
return -ENXIO;
spin_lock_irqsave(&priv->sta_lock, flags);
priv->stations[sta_id].sta.station_flags_msk = 0;
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK;
priv->stations[sta_id].sta.remove_immediate_ba_tid = (u8)tid;
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
spin_unlock_irqrestore(&priv->sta_lock, flags);
return iwl_send_add_sta(priv, &priv->stations[sta_id].sta,
CMD_ASYNC);
}
/*
* Find first available (lowest unused) Tx Queue, mark it "active".
* Called only when finding queue for aggregation.
* Should never return anything < 7, because they should already
* be in use as EDCA AC (0-3), Command (4), HCCA (5, 6).
*/
static int iwl4965_txq_ctx_activate_free(struct iwl_priv *priv)
{
int txq_id;
for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++)
if (!test_and_set_bit(txq_id, &priv->txq_ctx_active_msk))
return txq_id;
return -1;
}
static int iwl4965_tx_agg_start(struct ieee80211_hw *hw, const u8 *ra,
u16 tid, u16 *start_seq_num)
{
struct iwl_priv *priv = hw->priv;
int sta_id;
int tx_fifo;
int txq_id;
int ssn = -1;
int ret = 0;
unsigned long flags;
struct iwl_tid_data *tid_data;
DECLARE_MAC_BUF(mac);
if (likely(tid < ARRAY_SIZE(default_tid_to_tx_fifo)))
tx_fifo = default_tid_to_tx_fifo[tid];
else
return -EINVAL;
IWL_WARNING("%s on ra = %s tid = %d\n",
__func__, print_mac(mac, ra), tid);
sta_id = iwl_find_station(priv, ra);
if (sta_id == IWL_INVALID_STATION)
return -ENXIO;
if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_OFF) {
IWL_ERROR("Start AGG when state is not IWL_AGG_OFF !\n");
return -ENXIO;
}
txq_id = iwl4965_txq_ctx_activate_free(priv);
if (txq_id == -1)
return -ENXIO;
spin_lock_irqsave(&priv->sta_lock, flags);
tid_data = &priv->stations[sta_id].tid[tid];
ssn = SEQ_TO_SN(tid_data->seq_number);
tid_data->agg.txq_id = txq_id;
spin_unlock_irqrestore(&priv->sta_lock, flags);
*start_seq_num = ssn;
ret = iwl4965_tx_queue_agg_enable(priv, txq_id, tx_fifo,
sta_id, tid, ssn);
if (ret)
return ret;
ret = 0;
if (tid_data->tfds_in_queue == 0) {
printk(KERN_ERR "HW queue is empty\n");
tid_data->agg.state = IWL_AGG_ON;
ieee80211_start_tx_ba_cb_irqsafe(hw, ra, tid);
} else {
IWL_DEBUG_HT("HW queue is NOT empty: %d packets in HW queue\n",
tid_data->tfds_in_queue);
tid_data->agg.state = IWL_EMPTYING_HW_QUEUE_ADDBA;
}
return ret;
}
static int iwl4965_tx_agg_stop(struct ieee80211_hw *hw, const u8 *ra, u16 tid)
{
struct iwl_priv *priv = hw->priv;
int tx_fifo_id, txq_id, sta_id, ssn = -1;
struct iwl_tid_data *tid_data;
int ret, write_ptr, read_ptr;
unsigned long flags;
DECLARE_MAC_BUF(mac);
if (!ra) {
IWL_ERROR("ra = NULL\n");
return -EINVAL;
}
if (likely(tid < ARRAY_SIZE(default_tid_to_tx_fifo)))
tx_fifo_id = default_tid_to_tx_fifo[tid];
else
return -EINVAL;
sta_id = iwl_find_station(priv, ra);
if (sta_id == IWL_INVALID_STATION)
return -ENXIO;
if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON)
IWL_WARNING("Stopping AGG while state not IWL_AGG_ON\n");
tid_data = &priv->stations[sta_id].tid[tid];
ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4;
txq_id = tid_data->agg.txq_id;
write_ptr = priv->txq[txq_id].q.write_ptr;
read_ptr = priv->txq[txq_id].q.read_ptr;
/* The queue is not empty */
if (write_ptr != read_ptr) {
IWL_DEBUG_HT("Stopping a non empty AGG HW QUEUE\n");
priv->stations[sta_id].tid[tid].agg.state =
IWL_EMPTYING_HW_QUEUE_DELBA;
return 0;
}
IWL_DEBUG_HT("HW queue is empty\n");
priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF;
spin_lock_irqsave(&priv->lock, flags);
ret = iwl4965_tx_queue_agg_disable(priv, txq_id, ssn, tx_fifo_id);
spin_unlock_irqrestore(&priv->lock, flags);
if (ret)
return ret;
ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, ra, tid);
return 0;
}
int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw,
enum ieee80211_ampdu_mlme_action action,
const u8 *addr, u16 tid, u16 *ssn)
{
struct iwl_priv *priv = hw->priv;
DECLARE_MAC_BUF(mac);
IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n",
print_mac(mac, addr), tid);
switch (action) {
case IEEE80211_AMPDU_RX_START:
IWL_DEBUG_HT("start Rx\n");
return iwl4965_rx_agg_start(priv, addr, tid, *ssn);
case IEEE80211_AMPDU_RX_STOP:
IWL_DEBUG_HT("stop Rx\n");
return iwl4965_rx_agg_stop(priv, addr, tid);
case IEEE80211_AMPDU_TX_START:
IWL_DEBUG_HT("start Tx\n");
return iwl4965_tx_agg_start(hw, addr, tid, ssn);
case IEEE80211_AMPDU_TX_STOP:
IWL_DEBUG_HT("stop Tx\n");
return iwl4965_tx_agg_stop(hw, addr, tid);
default:
IWL_DEBUG_HT("unknown\n");
return -EINVAL;
break;
}
return 0;
}
#endif /* CONFIG_IWL4965_HT */
static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len)
{
switch (cmd_id) {
case REPLY_RXON:
return (u16) sizeof(struct iwl4965_rxon_cmd);
default:
return len;
}
}
static u16 iwl4965_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
{
struct iwl4965_addsta_cmd *addsta = (struct iwl4965_addsta_cmd *)data;
addsta->mode = cmd->mode;
memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
addsta->station_flags = cmd->station_flags;
addsta->station_flags_msk = cmd->station_flags_msk;
addsta->tid_disable_tx = cmd->tid_disable_tx;
addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
addsta->reserved1 = __constant_cpu_to_le16(0);
addsta->reserved2 = __constant_cpu_to_le32(0);
return (u16)sizeof(struct iwl4965_addsta_cmd);
}
/* Set up 4965-specific Rx frame reply handlers */
static void iwl4965_rx_handler_setup(struct iwl_priv *priv)
{
/* Legacy Rx frames */
priv->rx_handlers[REPLY_RX] = iwl4965_rx_reply_rx;
/* High-throughput (HT) Rx frames */
priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl4965_rx_reply_rx_phy;
priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl4965_rx_reply_rx;
priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
iwl4965_rx_missed_beacon_notif;
#ifdef CONFIG_IWL4965_HT
priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl4965_rx_reply_compressed_ba;
#endif /* CONFIG_IWL4965_HT */
}
void iwl4965_hw_setup_deferred_work(struct iwl_priv *priv)
{
INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work);
#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
INIT_WORK(&priv->sensitivity_work, iwl4965_bg_sensitivity_work);
#endif
init_timer(&priv->statistics_periodic);
priv->statistics_periodic.data = (unsigned long)priv;
priv->statistics_periodic.function = iwl4965_bg_statistics_periodic;
}
void iwl4965_hw_cancel_deferred_work(struct iwl_priv *priv)
{
del_timer_sync(&priv->statistics_periodic);
cancel_delayed_work(&priv->init_alive_start);
}
static struct iwl_hcmd_ops iwl4965_hcmd = {
.rxon_assoc = iwl4965_send_rxon_assoc,
};
static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
.get_hcmd_size = iwl4965_get_hcmd_size,
.enqueue_hcmd = iwl4965_enqueue_hcmd,
.build_addsta_hcmd = iwl4965_build_addsta_hcmd,
#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
.chain_noise_reset = iwl4965_chain_noise_reset,
.gain_computation = iwl4965_gain_computation,
#endif
};
static struct iwl_lib_ops iwl4965_lib = {
.set_hw_params = iwl4965_hw_set_hw_params,
.alloc_shared_mem = iwl4965_alloc_shared_mem,
.free_shared_mem = iwl4965_free_shared_mem,
.shared_mem_rx_idx = iwl4965_shared_mem_rx_idx,
.txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl,
.disable_tx_fifo = iwl4965_disable_tx_fifo,
.rx_handler_setup = iwl4965_rx_handler_setup,
.is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr,
.alive_notify = iwl4965_alive_notify,
.init_alive_start = iwl4965_init_alive_start,
.load_ucode = iwl4965_load_bsm,
.apm_ops = {
.init = iwl4965_apm_init,
.config = iwl4965_nic_config,
.set_pwr_src = iwl4965_set_pwr_src,
},
.eeprom_ops = {
.regulatory_bands = {
EEPROM_REGULATORY_BAND_1_CHANNELS,
EEPROM_REGULATORY_BAND_2_CHANNELS,
EEPROM_REGULATORY_BAND_3_CHANNELS,
EEPROM_REGULATORY_BAND_4_CHANNELS,
EEPROM_REGULATORY_BAND_5_CHANNELS,
EEPROM_4965_REGULATORY_BAND_24_FAT_CHANNELS,
EEPROM_4965_REGULATORY_BAND_52_FAT_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
.release_semaphore = iwlcore_eeprom_release_semaphore,
.check_version = iwl4965_eeprom_check_version,
.query_addr = iwlcore_eeprom_query_addr,
},
.radio_kill_sw = iwl4965_radio_kill_sw,
.set_power = iwl4965_set_power,
.update_chain_flags = iwl4965_update_chain_flags,
};
static struct iwl_ops iwl4965_ops = {
.lib = &iwl4965_lib,
.hcmd = &iwl4965_hcmd,
.utils = &iwl4965_hcmd_utils,
};
struct iwl_cfg iwl4965_agn_cfg = {
.name = "4965AGN",
.fw_name = "iwlwifi-4965" IWL4965_UCODE_API ".ucode",
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.eeprom_size = IWL4965_EEPROM_IMG_SIZE,
.ops = &iwl4965_ops,
.mod_params = &iwl4965_mod_params,
};
module_param_named(antenna, iwl4965_mod_params.antenna, int, 0444);
MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
module_param_named(disable, iwl4965_mod_params.disable, int, 0444);
MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])\n");
module_param_named(debug, iwl4965_mod_params.debug, int, 0444);
MODULE_PARM_DESC(debug, "debug output mask");
module_param_named(
disable_hw_scan, iwl4965_mod_params.disable_hw_scan, int, 0444);
MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, 0444);
MODULE_PARM_DESC(queues_num, "number of hw queues.");
/* QoS */
module_param_named(qos_enable, iwl4965_mod_params.enable_qos, int, 0444);
MODULE_PARM_DESC(qos_enable, "enable all QoS functionality");
module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K, int, 0444);
MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
module_param_named(fw_restart4965, iwl4965_mod_params.restart_fw, int, 0444);
MODULE_PARM_DESC(fw_restart4965, "restart firmware in case of error");