linux/arch/arm/mach-imx/pcm970-baseboard.c

232 lines
5.2 KiB
C
Raw Normal View History

/*
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/can/platform/sja1000.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/iomux-mx27.h>
#include <mach/hardware.h>
#include "devices-imx27.h"
static const int pcm970_pins[] __initconst = {
/* SDHC */
PB4_PF_SD2_D0,
PB5_PF_SD2_D1,
PB6_PF_SD2_D2,
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
/* display */
PA5_PF_LSCLK,
PA6_PF_LD0,
PA7_PF_LD1,
PA8_PF_LD2,
PA9_PF_LD3,
PA10_PF_LD4,
PA11_PF_LD5,
PA12_PF_LD6,
PA13_PF_LD7,
PA14_PF_LD8,
PA15_PF_LD9,
PA16_PF_LD10,
PA17_PF_LD11,
PA18_PF_LD12,
PA19_PF_LD13,
PA20_PF_LD14,
PA21_PF_LD15,
PA22_PF_LD16,
PA23_PF_LD17,
PA24_PF_REV,
PA25_PF_CLS,
PA26_PF_PS,
PA27_PF_SPL_SPR,
PA28_PF_HSYNC,
PA29_PF_VSYNC,
PA30_PF_CONTRAST,
PA31_PF_OE_ACD,
/*
* it seems the data line misses a pullup, so we must enable
* the internal pullup as a local workaround
*/
PD17_PF_I2C_DATA | GPIO_PUEN,
PD18_PF_I2C_CLK,
/* Camera */
PB10_PF_CSI_D0,
PB11_PF_CSI_D1,
PB12_PF_CSI_D2,
PB13_PF_CSI_D3,
PB14_PF_CSI_D4,
PB15_PF_CSI_MCLK,
PB16_PF_CSI_PIXCLK,
PB17_PF_CSI_D5,
PB18_PF_CSI_D6,
PB19_PF_CSI_D7,
PB20_PF_CSI_VSYNC,
PB21_PF_CSI_HSYNC,
};
static int pcm970_sdhc2_get_ro(struct device *dev)
{
return gpio_get_value(GPIO_PORTC + 28);
}
static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
{
int ret;
ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
"imx-mmc-detect", data);
if (ret)
return ret;
ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
if (ret) {
free_irq(IRQ_GPIOC(29), data);
return ret;
}
gpio_direction_input(GPIO_PORTC + 28);
return 0;
}
static void pcm970_sdhc2_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOC(29), data);
gpio_free(GPIO_PORTC + 28);
}
static const struct imxmmc_platform_data sdhc_pdata __initconst = {
.get_ro = pcm970_sdhc2_get_ro,
.init = pcm970_sdhc2_init,
.exit = pcm970_sdhc2_exit,
};
static struct imx_fb_videomode pcm970_modes[] = {
{
.mode = {
.name = "Sharp-LQ035Q7",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 188679, /* in ps (5.3MHz) */
.hsync_len = 7,
.left_margin = 5,
.right_margin = 16,
.vsync_len = 1,
.upper_margin = 7,
.lower_margin = 9,
},
/*
* - HSYNC active high
* - VSYNC active high
* - clk notenabled while idle
* - clock not inverted
* - data not inverted
* - data enable low active
* - enable sharp mode
*/
.pcr = 0xF00080C0,
.bpp = 16,
}, {
.mode = {
.name = "TX090",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 38255,
.left_margin = 144,
.right_margin = 0,
.upper_margin = 7,
.lower_margin = 40,
.hsync_len = 96,
.vsync_len = 1,
},
/*
* - HSYNC active low (1 << 22)
* - VSYNC active low (1 << 23)
* - clk notenabled while idle
* - clock not inverted
* - data not inverted
* - data enable low active
* - enable sharp mode
*/
.pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
.bpp = 32,
},
};
static const struct imx_fb_platform_data pcm038_fb_data __initconst = {
.mode = pcm970_modes,
.num_modes = ARRAY_SIZE(pcm970_modes),
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
};
static struct resource pcm970_sja1000_resources[] = {
{
.start = MX27_CS4_BASE_ADDR,
.end = MX27_CS4_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_GPIOE(19),
.end = IRQ_GPIOE(19),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
static struct sja1000_platform_data pcm970_sja1000_platform_data = {
.osc_freq = 16000000,
.ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
.cdr = CDR_CBP,
};
static struct platform_device pcm970_sja1000 = {
.name = "sja1000_platform",
.dev = {
.platform_data = &pcm970_sja1000_platform_data,
},
.resource = pcm970_sja1000_resources,
.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
};
/*
* system init for baseboard usage. Will be called by pcm038 init.
*
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
void __init pcm970_baseboard_init(void)
{
mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
"PCM970");
imx27_add_imx_fb(&pcm038_fb_data);
mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
imx27_add_mxc_mmc(1, &sdhc_pdata);
platform_device_register(&pcm970_sja1000);
}