q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/drivers/mfd/wm8350-core.c

1520 lines
43 KiB
C
Raw Normal View History

mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
/*
* wm8350-core.c -- Device access for Wolfson WM8350
*
* Copyright 2007, 2008 Wolfson Microelectronics PLC.
*
* Author: Liam Girdwood, Mark Brown
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
mfd: Add WM8350 interrupt support The WM8350 has an interrupt line to the CPU which is shared by the devices on the CPU. This patch adds support for the interrupt controller within the WM8350 which identifies which identifies the interrupt cause. In common with other similar chips this is done outside the standard interrupt framework due to the need to access the interrupt controller over an interrupt-driven bus. This code was all originally written by Liam Girdwood with updates for submission by me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:14 +00:00
#include <linux/bug.h>
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
mfd: Add WM8350 interrupt support The WM8350 has an interrupt line to the CPU which is shared by the devices on the CPU. This patch adds support for the interrupt controller within the WM8350 which identifies which identifies the interrupt cause. In common with other similar chips this is done outside the standard interrupt framework due to the need to access the interrupt controller over an interrupt-driven bus. This code was all originally written by Liam Girdwood with updates for submission by me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:14 +00:00
#include <linux/workqueue.h>
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
#include <linux/mfd/wm8350/core.h>
#include <linux/mfd/wm8350/audio.h>
mfd: Add WM8350 interrupt support The WM8350 has an interrupt line to the CPU which is shared by the devices on the CPU. This patch adds support for the interrupt controller within the WM8350 which identifies which identifies the interrupt cause. In common with other similar chips this is done outside the standard interrupt framework due to the need to access the interrupt controller over an interrupt-driven bus. This code was all originally written by Liam Girdwood with updates for submission by me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:14 +00:00
#include <linux/mfd/wm8350/comparator.h>
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
#include <linux/mfd/wm8350/gpio.h>
#include <linux/mfd/wm8350/pmic.h>
mfd: Add WM8350 interrupt support The WM8350 has an interrupt line to the CPU which is shared by the devices on the CPU. This patch adds support for the interrupt controller within the WM8350 which identifies which identifies the interrupt cause. In common with other similar chips this is done outside the standard interrupt framework due to the need to access the interrupt controller over an interrupt-driven bus. This code was all originally written by Liam Girdwood with updates for submission by me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:14 +00:00
#include <linux/mfd/wm8350/rtc.h>
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
#include <linux/mfd/wm8350/supply.h>
mfd: Add WM8350 interrupt support The WM8350 has an interrupt line to the CPU which is shared by the devices on the CPU. This patch adds support for the interrupt controller within the WM8350 which identifies which identifies the interrupt cause. In common with other similar chips this is done outside the standard interrupt framework due to the need to access the interrupt controller over an interrupt-driven bus. This code was all originally written by Liam Girdwood with updates for submission by me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:14 +00:00
#include <linux/mfd/wm8350/wdt.h>
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
#define WM8350_UNLOCK_KEY 0x0013
#define WM8350_LOCK_KEY 0x0000
#define WM8350_CLOCK_CONTROL_1 0x28
#define WM8350_AIF_TEST 0x74
/* debug */
#define WM8350_BUS_DEBUG 0
#if WM8350_BUS_DEBUG
#define dump(regs, src) do { \
int i_; \
u16 *src_ = src; \
printk(KERN_DEBUG); \
for (i_ = 0; i_ < regs; i_++) \
printk(" 0x%4.4x", *src_++); \
printk("\n"); \
} while (0);
#else
#define dump(bytes, src)
#endif
#define WM8350_LOCK_DEBUG 0
#if WM8350_LOCK_DEBUG
#define ldbg(format, arg...) printk(format, ## arg)
#else
#define ldbg(format, arg...)
#endif
/*
* WM8350 Device IO
*/
static DEFINE_MUTEX(io_mutex);
static DEFINE_MUTEX(reg_lock_mutex);
/* Perform a physical read from the device.
*/
static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs,
u16 *dest)
{
int i, ret;
int bytes = num_regs * 2;
dev_dbg(wm8350->dev, "volatile read\n");
ret = wm8350->read_dev(wm8350, reg, bytes, (char *)dest);
for (i = reg; i < reg + num_regs; i++) {
/* Cache is CPU endian */
dest[i - reg] = be16_to_cpu(dest[i - reg]);
/* Satisfy non-volatile bits from cache */
dest[i - reg] &= wm8350_reg_io_map[i].vol;
dest[i - reg] |= wm8350->reg_cache[i];
/* Mask out non-readable bits */
dest[i - reg] &= wm8350_reg_io_map[i].readable;
}
dump(num_regs, dest);
return ret;
}
static int wm8350_read(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *dest)
{
int i;
int end = reg + num_regs;
int ret = 0;
int bytes = num_regs * 2;
if (wm8350->read_dev == NULL)
return -ENODEV;
if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) {
dev_err(wm8350->dev, "invalid reg %x\n",
reg + num_regs - 1);
return -EINVAL;
}
dev_dbg(wm8350->dev,
"%s R%d(0x%2.2x) %d regs\n", __func__, reg, reg, num_regs);
#if WM8350_BUS_DEBUG
/* we can _safely_ read any register, but warn if read not supported */
for (i = reg; i < end; i++) {
if (!wm8350_reg_io_map[i].readable)
dev_warn(wm8350->dev,
"reg R%d is not readable\n", i);
}
#endif
/* if any volatile registers are required, then read back all */
for (i = reg; i < end; i++)
if (wm8350_reg_io_map[i].vol)
return wm8350_phys_read(wm8350, reg, num_regs, dest);
/* no volatiles, then cache is good */
dev_dbg(wm8350->dev, "cache read\n");
memcpy(dest, &wm8350->reg_cache[reg], bytes);
dump(num_regs, dest);
return ret;
}
static inline int is_reg_locked(struct wm8350 *wm8350, u8 reg)
{
if (reg == WM8350_SECURITY ||
wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY)
return 0;
if ((reg == WM8350_GPIO_CONFIGURATION_I_O) ||
(reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
reg <= WM8350_GPIO_FUNCTION_SELECT_4) ||
(reg >= WM8350_BATTERY_CHARGER_CONTROL_1 &&
reg <= WM8350_BATTERY_CHARGER_CONTROL_3))
return 1;
return 0;
}
static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src)
{
int i;
int end = reg + num_regs;
int bytes = num_regs * 2;
if (wm8350->write_dev == NULL)
return -ENODEV;
if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) {
dev_err(wm8350->dev, "invalid reg %x\n",
reg + num_regs - 1);
return -EINVAL;
}
/* it's generally not a good idea to write to RO or locked registers */
for (i = reg; i < end; i++) {
if (!wm8350_reg_io_map[i].writable) {
dev_err(wm8350->dev,
"attempted write to read only reg R%d\n", i);
return -EINVAL;
}
if (is_reg_locked(wm8350, i)) {
dev_err(wm8350->dev,
"attempted write to locked reg R%d\n", i);
return -EINVAL;
}
src[i - reg] &= wm8350_reg_io_map[i].writable;
wm8350->reg_cache[i] =
(wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable)
| src[i - reg];
mfd: Don't store volatile bits in WM8350 register cache This makes the contents of the cache clearer and fixes incorrect initialisation of the cache for partially volatile registers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-20 21:58:50 +00:00
/* Don't store volatile bits */
wm8350->reg_cache[i] &= ~wm8350_reg_io_map[i].vol;
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
src[i - reg] = cpu_to_be16(src[i - reg]);
}
/* Actually write it out */
return wm8350->write_dev(wm8350, reg, bytes, (char *)src);
}
/*
* Safe read, modify, write methods
*/
int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
{
u16 data;
int err;
mutex_lock(&io_mutex);
err = wm8350_read(wm8350, reg, 1, &data);
if (err) {
dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
goto out;
}
data &= ~mask;
err = wm8350_write(wm8350, reg, 1, &data);
if (err)
dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
out:
mutex_unlock(&io_mutex);
return err;
}
EXPORT_SYMBOL_GPL(wm8350_clear_bits);
int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
{
u16 data;
int err;
mutex_lock(&io_mutex);
err = wm8350_read(wm8350, reg, 1, &data);
if (err) {
dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
goto out;
}
data |= mask;
err = wm8350_write(wm8350, reg, 1, &data);
if (err)
dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
out:
mutex_unlock(&io_mutex);
return err;
}
EXPORT_SYMBOL_GPL(wm8350_set_bits);
u16 wm8350_reg_read(struct wm8350 *wm8350, int reg)
{
u16 data;
int err;
mutex_lock(&io_mutex);
err = wm8350_read(wm8350, reg, 1, &data);
if (err)
dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
mutex_unlock(&io_mutex);
return data;
}
EXPORT_SYMBOL_GPL(wm8350_reg_read);
int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val)
{
int ret;
u16 data = val;
mutex_lock(&io_mutex);
ret = wm8350_write(wm8350, reg, 1, &data);
if (ret)
dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
mutex_unlock(&io_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(wm8350_reg_write);
int wm8350_block_read(struct wm8350 *wm8350, int start_reg, int regs,
u16 *dest)
{
int err = 0;
mutex_lock(&io_mutex);
err = wm8350_read(wm8350, start_reg, regs, dest);
if (err)
dev_err(wm8350->dev, "block read starting from R%d failed\n",
start_reg);
mutex_unlock(&io_mutex);
return err;
}
EXPORT_SYMBOL_GPL(wm8350_block_read);
int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs,
u16 *src)
{
int ret = 0;
mutex_lock(&io_mutex);
ret = wm8350_write(wm8350, start_reg, regs, src);
if (ret)
dev_err(wm8350->dev, "block write starting at R%d failed\n",
start_reg);
mutex_unlock(&io_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(wm8350_block_write);
mfd: Add some documentation for WM8350 register lock Hopefully this will make the purpose of these functions a bit clearer, it's not immediately obvious that the lock is a hardware feature. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-07 23:57:33 +00:00
/**
* wm8350_reg_lock()
*
* The WM8350 has a hardware lock which can be used to prevent writes to
* some registers (generally those which can cause particularly serious
* problems if misused). This function enables that lock.
*/
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
int wm8350_reg_lock(struct wm8350 *wm8350)
{
u16 key = WM8350_LOCK_KEY;
int ret;
ldbg(__func__);
mutex_lock(&io_mutex);
ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key);
if (ret)
dev_err(wm8350->dev, "lock failed\n");
mutex_unlock(&io_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(wm8350_reg_lock);
mfd: Add some documentation for WM8350 register lock Hopefully this will make the purpose of these functions a bit clearer, it's not immediately obvious that the lock is a hardware feature. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-07 23:57:33 +00:00
/**
* wm8350_reg_unlock()
*
* The WM8350 has a hardware lock which can be used to prevent writes to
* some registers (generally those which can cause particularly serious
* problems if misused). This function disables that lock so updates
* can be performed. For maximum safety this should be done only when
* required.
*/
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
int wm8350_reg_unlock(struct wm8350 *wm8350)
{
u16 key = WM8350_UNLOCK_KEY;
int ret;
ldbg(__func__);
mutex_lock(&io_mutex);
ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key);
if (ret)
dev_err(wm8350->dev, "unlock failed\n");
mutex_unlock(&io_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(wm8350_reg_unlock);
mfd: Add WM8350 interrupt support The WM8350 has an interrupt line to the CPU which is shared by the devices on the CPU. This patch adds support for the interrupt controller within the WM8350 which identifies which identifies the interrupt cause. In common with other similar chips this is done outside the standard interrupt framework due to the need to access the interrupt controller over an interrupt-driven bus. This code was all originally written by Liam Girdwood with updates for submission by me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:14 +00:00
static void wm8350_irq_call_handler(struct wm8350 *wm8350, int irq)
{
mutex_lock(&wm8350->irq_mutex);
if (wm8350->irq[irq].handler)
wm8350->irq[irq].handler(wm8350, irq, wm8350->irq[irq].data);
else {
dev_err(wm8350->dev, "irq %d nobody cared. now masked.\n",
irq);
wm8350_mask_irq(wm8350, irq);
}
mutex_unlock(&wm8350->irq_mutex);
}
/*
* wm8350_irq_worker actually handles the interrupts. Since all
* interrupts are clear on read the IRQ line will be reasserted and
* the physical IRQ will be handled again if another interrupt is
* asserted while we run - in the normal course of events this is a
* rare occurrence so we save I2C/SPI reads.
*/
static void wm8350_irq_worker(struct work_struct *work)
{
struct wm8350 *wm8350 = container_of(work, struct wm8350, irq_work);
u16 level_one, status1, status2, comp;
/* TODO: Use block reads to improve performance? */
level_one = wm8350_reg_read(wm8350, WM8350_SYSTEM_INTERRUPTS)
& ~wm8350_reg_read(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK);
status1 = wm8350_reg_read(wm8350, WM8350_INT_STATUS_1)
& ~wm8350_reg_read(wm8350, WM8350_INT_STATUS_1_MASK);
status2 = wm8350_reg_read(wm8350, WM8350_INT_STATUS_2)
& ~wm8350_reg_read(wm8350, WM8350_INT_STATUS_2_MASK);
comp = wm8350_reg_read(wm8350, WM8350_COMPARATOR_INT_STATUS)
& ~wm8350_reg_read(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK);
/* over current */
if (level_one & WM8350_OC_INT) {
u16 oc;
oc = wm8350_reg_read(wm8350, WM8350_OVER_CURRENT_INT_STATUS);
oc &= ~wm8350_reg_read(wm8350,
WM8350_OVER_CURRENT_INT_STATUS_MASK);
if (oc & WM8350_OC_LS_EINT) /* limit switch */
wm8350_irq_call_handler(wm8350, WM8350_IRQ_OC_LS);
}
/* under voltage */
if (level_one & WM8350_UV_INT) {
u16 uv;
uv = wm8350_reg_read(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS);
uv &= ~wm8350_reg_read(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK);
if (uv & WM8350_UV_DC1_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC1);
if (uv & WM8350_UV_DC2_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC2);
if (uv & WM8350_UV_DC3_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC3);
if (uv & WM8350_UV_DC4_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC4);
if (uv & WM8350_UV_DC5_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC5);
if (uv & WM8350_UV_DC6_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC6);
if (uv & WM8350_UV_LDO1_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_LDO1);
if (uv & WM8350_UV_LDO2_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_LDO2);
if (uv & WM8350_UV_LDO3_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_LDO3);
if (uv & WM8350_UV_LDO4_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_LDO4);
}
/* charger, RTC */
if (status1) {
if (status1 & WM8350_CHG_BAT_HOT_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_CHG_BAT_HOT);
if (status1 & WM8350_CHG_BAT_COLD_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_CHG_BAT_COLD);
if (status1 & WM8350_CHG_BAT_FAIL_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_CHG_BAT_FAIL);
if (status1 & WM8350_CHG_TO_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_CHG_TO);
if (status1 & WM8350_CHG_END_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_CHG_END);
if (status1 & WM8350_CHG_START_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_CHG_START);
if (status1 & WM8350_CHG_FAST_RDY_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_CHG_FAST_RDY);
if (status1 & WM8350_CHG_VBATT_LT_3P9_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_CHG_VBATT_LT_3P9);
if (status1 & WM8350_CHG_VBATT_LT_3P1_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_CHG_VBATT_LT_3P1);
if (status1 & WM8350_CHG_VBATT_LT_2P85_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_CHG_VBATT_LT_2P85);
if (status1 & WM8350_RTC_ALM_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_RTC_ALM);
if (status1 & WM8350_RTC_SEC_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_RTC_SEC);
if (status1 & WM8350_RTC_PER_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_RTC_PER);
}
/* current sink, system, aux adc */
if (status2) {
if (status2 & WM8350_CS1_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_CS1);
if (status2 & WM8350_CS2_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_CS2);
if (status2 & WM8350_SYS_HYST_COMP_FAIL_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_SYS_HYST_COMP_FAIL);
if (status2 & WM8350_SYS_CHIP_GT115_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_SYS_CHIP_GT115);
if (status2 & WM8350_SYS_CHIP_GT140_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_SYS_CHIP_GT140);
if (status2 & WM8350_SYS_WDOG_TO_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_SYS_WDOG_TO);
if (status2 & WM8350_AUXADC_DATARDY_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_AUXADC_DATARDY);
if (status2 & WM8350_AUXADC_DCOMP4_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_AUXADC_DCOMP4);
if (status2 & WM8350_AUXADC_DCOMP3_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_AUXADC_DCOMP3);
if (status2 & WM8350_AUXADC_DCOMP2_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_AUXADC_DCOMP2);
if (status2 & WM8350_AUXADC_DCOMP1_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_AUXADC_DCOMP1);
if (status2 & WM8350_USB_LIMIT_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_USB_LIMIT);
}
/* wake, codec, ext */
if (comp) {
if (comp & WM8350_WKUP_OFF_STATE_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_WKUP_OFF_STATE);
if (comp & WM8350_WKUP_HIB_STATE_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_WKUP_HIB_STATE);
if (comp & WM8350_WKUP_CONV_FAULT_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_WKUP_CONV_FAULT);
if (comp & WM8350_WKUP_WDOG_RST_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_WKUP_WDOG_RST);
if (comp & WM8350_WKUP_GP_PWR_ON_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_WKUP_GP_PWR_ON);
if (comp & WM8350_WKUP_ONKEY_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_WKUP_ONKEY);
if (comp & WM8350_WKUP_GP_WAKEUP_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_WKUP_GP_WAKEUP);
if (comp & WM8350_CODEC_JCK_DET_L_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_CODEC_JCK_DET_L);
if (comp & WM8350_CODEC_JCK_DET_R_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_CODEC_JCK_DET_R);
if (comp & WM8350_CODEC_MICSCD_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_CODEC_MICSCD);
if (comp & WM8350_CODEC_MICD_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_CODEC_MICD);
if (comp & WM8350_EXT_USB_FB_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_EXT_USB_FB);
if (comp & WM8350_EXT_WALL_FB_EINT)
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_EXT_WALL_FB);
if (comp & WM8350_EXT_BAT_FB_EINT)
wm8350_irq_call_handler(wm8350, WM8350_IRQ_EXT_BAT_FB);
}
if (level_one & WM8350_GP_INT) {
int i;
u16 gpio;
gpio = wm8350_reg_read(wm8350, WM8350_GPIO_INT_STATUS);
gpio &= ~wm8350_reg_read(wm8350,
WM8350_GPIO_INT_STATUS_MASK);
for (i = 0; i < 12; i++) {
if (gpio & (1 << i))
wm8350_irq_call_handler(wm8350,
WM8350_IRQ_GPIO(i));
}
}
enable_irq(wm8350->chip_irq);
}
static irqreturn_t wm8350_irq(int irq, void *data)
{
struct wm8350 *wm8350 = data;
disable_irq_nosync(irq);
schedule_work(&wm8350->irq_work);
return IRQ_HANDLED;
}
int wm8350_register_irq(struct wm8350 *wm8350, int irq,
void (*handler) (struct wm8350 *, int, void *),
void *data)
{
if (irq < 0 || irq > WM8350_NUM_IRQ || !handler)
return -EINVAL;
if (wm8350->irq[irq].handler)
return -EBUSY;
mutex_lock(&wm8350->irq_mutex);
wm8350->irq[irq].handler = handler;
wm8350->irq[irq].data = data;
mutex_unlock(&wm8350->irq_mutex);
return 0;
}
EXPORT_SYMBOL_GPL(wm8350_register_irq);
int wm8350_free_irq(struct wm8350 *wm8350, int irq)
{
if (irq < 0 || irq > WM8350_NUM_IRQ)
return -EINVAL;
mutex_lock(&wm8350->irq_mutex);
wm8350->irq[irq].handler = NULL;
mutex_unlock(&wm8350->irq_mutex);
return 0;
}
EXPORT_SYMBOL_GPL(wm8350_free_irq);
int wm8350_mask_irq(struct wm8350 *wm8350, int irq)
{
switch (irq) {
case WM8350_IRQ_CHG_BAT_HOT:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_BAT_HOT_EINT);
case WM8350_IRQ_CHG_BAT_COLD:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_BAT_COLD_EINT);
case WM8350_IRQ_CHG_BAT_FAIL:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_BAT_FAIL_EINT);
case WM8350_IRQ_CHG_TO:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_TO_EINT);
case WM8350_IRQ_CHG_END:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_END_EINT);
case WM8350_IRQ_CHG_START:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_START_EINT);
case WM8350_IRQ_CHG_FAST_RDY:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_FAST_RDY_EINT);
case WM8350_IRQ_RTC_PER:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_RTC_PER_EINT);
case WM8350_IRQ_RTC_SEC:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_RTC_SEC_EINT);
case WM8350_IRQ_RTC_ALM:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_RTC_ALM_EINT);
case WM8350_IRQ_CHG_VBATT_LT_3P9:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_VBATT_LT_3P9_EINT);
case WM8350_IRQ_CHG_VBATT_LT_3P1:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_VBATT_LT_3P1_EINT);
case WM8350_IRQ_CHG_VBATT_LT_2P85:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_VBATT_LT_2P85_EINT);
case WM8350_IRQ_CS1:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_CS1_EINT);
case WM8350_IRQ_CS2:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_CS2_EINT);
case WM8350_IRQ_USB_LIMIT:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_USB_LIMIT_EINT);
case WM8350_IRQ_AUXADC_DATARDY:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_AUXADC_DATARDY_EINT);
case WM8350_IRQ_AUXADC_DCOMP4:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_AUXADC_DCOMP4_EINT);
case WM8350_IRQ_AUXADC_DCOMP3:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_AUXADC_DCOMP3_EINT);
case WM8350_IRQ_AUXADC_DCOMP2:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_AUXADC_DCOMP2_EINT);
case WM8350_IRQ_AUXADC_DCOMP1:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_AUXADC_DCOMP1_EINT);
case WM8350_IRQ_SYS_HYST_COMP_FAIL:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_SYS_HYST_COMP_FAIL_EINT);
case WM8350_IRQ_SYS_CHIP_GT115:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_SYS_CHIP_GT115_EINT);
case WM8350_IRQ_SYS_CHIP_GT140:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_SYS_CHIP_GT140_EINT);
case WM8350_IRQ_SYS_WDOG_TO:
return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_SYS_WDOG_TO_EINT);
case WM8350_IRQ_UV_LDO4:
return wm8350_set_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_LDO4_EINT);
case WM8350_IRQ_UV_LDO3:
return wm8350_set_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_LDO3_EINT);
case WM8350_IRQ_UV_LDO2:
return wm8350_set_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_LDO2_EINT);
case WM8350_IRQ_UV_LDO1:
return wm8350_set_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_LDO1_EINT);
case WM8350_IRQ_UV_DC6:
return wm8350_set_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_DC6_EINT);
case WM8350_IRQ_UV_DC5:
return wm8350_set_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_DC5_EINT);
case WM8350_IRQ_UV_DC4:
return wm8350_set_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_DC4_EINT);
case WM8350_IRQ_UV_DC3:
return wm8350_set_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_DC3_EINT);
case WM8350_IRQ_UV_DC2:
return wm8350_set_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_DC2_EINT);
case WM8350_IRQ_UV_DC1:
return wm8350_set_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_DC1_EINT);
case WM8350_IRQ_OC_LS:
return wm8350_set_bits(wm8350,
WM8350_OVER_CURRENT_INT_STATUS_MASK,
WM8350_IM_OC_LS_EINT);
case WM8350_IRQ_EXT_USB_FB:
return wm8350_set_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_EXT_USB_FB_EINT);
case WM8350_IRQ_EXT_WALL_FB:
return wm8350_set_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_EXT_WALL_FB_EINT);
case WM8350_IRQ_EXT_BAT_FB:
return wm8350_set_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_EXT_BAT_FB_EINT);
case WM8350_IRQ_CODEC_JCK_DET_L:
return wm8350_set_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_CODEC_JCK_DET_L_EINT);
case WM8350_IRQ_CODEC_JCK_DET_R:
return wm8350_set_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_CODEC_JCK_DET_R_EINT);
case WM8350_IRQ_CODEC_MICSCD:
return wm8350_set_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_CODEC_MICSCD_EINT);
case WM8350_IRQ_CODEC_MICD:
return wm8350_set_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_CODEC_MICD_EINT);
case WM8350_IRQ_WKUP_OFF_STATE:
return wm8350_set_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_WKUP_OFF_STATE_EINT);
case WM8350_IRQ_WKUP_HIB_STATE:
return wm8350_set_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_WKUP_HIB_STATE_EINT);
case WM8350_IRQ_WKUP_CONV_FAULT:
return wm8350_set_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_WKUP_CONV_FAULT_EINT);
case WM8350_IRQ_WKUP_WDOG_RST:
return wm8350_set_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_WKUP_OFF_STATE_EINT);
case WM8350_IRQ_WKUP_GP_PWR_ON:
return wm8350_set_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_WKUP_GP_PWR_ON_EINT);
case WM8350_IRQ_WKUP_ONKEY:
return wm8350_set_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_WKUP_ONKEY_EINT);
case WM8350_IRQ_WKUP_GP_WAKEUP:
return wm8350_set_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_WKUP_GP_WAKEUP_EINT);
case WM8350_IRQ_GPIO(0):
return wm8350_set_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP0_EINT);
case WM8350_IRQ_GPIO(1):
return wm8350_set_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP1_EINT);
case WM8350_IRQ_GPIO(2):
return wm8350_set_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP2_EINT);
case WM8350_IRQ_GPIO(3):
return wm8350_set_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP3_EINT);
case WM8350_IRQ_GPIO(4):
return wm8350_set_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP4_EINT);
case WM8350_IRQ_GPIO(5):
return wm8350_set_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP5_EINT);
case WM8350_IRQ_GPIO(6):
return wm8350_set_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP6_EINT);
case WM8350_IRQ_GPIO(7):
return wm8350_set_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP7_EINT);
case WM8350_IRQ_GPIO(8):
return wm8350_set_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP8_EINT);
case WM8350_IRQ_GPIO(9):
return wm8350_set_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP9_EINT);
case WM8350_IRQ_GPIO(10):
return wm8350_set_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP10_EINT);
case WM8350_IRQ_GPIO(11):
return wm8350_set_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP11_EINT);
case WM8350_IRQ_GPIO(12):
return wm8350_set_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP12_EINT);
default:
dev_warn(wm8350->dev, "Attempting to mask unknown IRQ %d\n",
irq);
return -EINVAL;
}
return 0;
}
EXPORT_SYMBOL_GPL(wm8350_mask_irq);
int wm8350_unmask_irq(struct wm8350 *wm8350, int irq)
{
switch (irq) {
case WM8350_IRQ_CHG_BAT_HOT:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_BAT_HOT_EINT);
case WM8350_IRQ_CHG_BAT_COLD:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_BAT_COLD_EINT);
case WM8350_IRQ_CHG_BAT_FAIL:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_BAT_FAIL_EINT);
case WM8350_IRQ_CHG_TO:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_TO_EINT);
case WM8350_IRQ_CHG_END:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_END_EINT);
case WM8350_IRQ_CHG_START:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_START_EINT);
case WM8350_IRQ_CHG_FAST_RDY:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_FAST_RDY_EINT);
case WM8350_IRQ_RTC_PER:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_RTC_PER_EINT);
case WM8350_IRQ_RTC_SEC:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_RTC_SEC_EINT);
case WM8350_IRQ_RTC_ALM:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_RTC_ALM_EINT);
case WM8350_IRQ_CHG_VBATT_LT_3P9:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_VBATT_LT_3P9_EINT);
case WM8350_IRQ_CHG_VBATT_LT_3P1:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_VBATT_LT_3P1_EINT);
case WM8350_IRQ_CHG_VBATT_LT_2P85:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
WM8350_IM_CHG_VBATT_LT_2P85_EINT);
case WM8350_IRQ_CS1:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_CS1_EINT);
case WM8350_IRQ_CS2:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_CS2_EINT);
case WM8350_IRQ_USB_LIMIT:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_USB_LIMIT_EINT);
case WM8350_IRQ_AUXADC_DATARDY:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_AUXADC_DATARDY_EINT);
case WM8350_IRQ_AUXADC_DCOMP4:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_AUXADC_DCOMP4_EINT);
case WM8350_IRQ_AUXADC_DCOMP3:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_AUXADC_DCOMP3_EINT);
case WM8350_IRQ_AUXADC_DCOMP2:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_AUXADC_DCOMP2_EINT);
case WM8350_IRQ_AUXADC_DCOMP1:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_AUXADC_DCOMP1_EINT);
case WM8350_IRQ_SYS_HYST_COMP_FAIL:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_SYS_HYST_COMP_FAIL_EINT);
case WM8350_IRQ_SYS_CHIP_GT115:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_SYS_CHIP_GT115_EINT);
case WM8350_IRQ_SYS_CHIP_GT140:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_SYS_CHIP_GT140_EINT);
case WM8350_IRQ_SYS_WDOG_TO:
return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
WM8350_IM_SYS_WDOG_TO_EINT);
case WM8350_IRQ_UV_LDO4:
return wm8350_clear_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_LDO4_EINT);
case WM8350_IRQ_UV_LDO3:
return wm8350_clear_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_LDO3_EINT);
case WM8350_IRQ_UV_LDO2:
return wm8350_clear_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_LDO2_EINT);
case WM8350_IRQ_UV_LDO1:
return wm8350_clear_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_LDO1_EINT);
case WM8350_IRQ_UV_DC6:
return wm8350_clear_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_DC6_EINT);
case WM8350_IRQ_UV_DC5:
return wm8350_clear_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_DC5_EINT);
case WM8350_IRQ_UV_DC4:
return wm8350_clear_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_DC4_EINT);
case WM8350_IRQ_UV_DC3:
return wm8350_clear_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_DC3_EINT);
case WM8350_IRQ_UV_DC2:
return wm8350_clear_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_DC2_EINT);
case WM8350_IRQ_UV_DC1:
return wm8350_clear_bits(wm8350,
WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
WM8350_IM_UV_DC1_EINT);
case WM8350_IRQ_OC_LS:
return wm8350_clear_bits(wm8350,
WM8350_OVER_CURRENT_INT_STATUS_MASK,
WM8350_IM_OC_LS_EINT);
case WM8350_IRQ_EXT_USB_FB:
return wm8350_clear_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_EXT_USB_FB_EINT);
case WM8350_IRQ_EXT_WALL_FB:
return wm8350_clear_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_EXT_WALL_FB_EINT);
case WM8350_IRQ_EXT_BAT_FB:
return wm8350_clear_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_EXT_BAT_FB_EINT);
case WM8350_IRQ_CODEC_JCK_DET_L:
return wm8350_clear_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_CODEC_JCK_DET_L_EINT);
case WM8350_IRQ_CODEC_JCK_DET_R:
return wm8350_clear_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_CODEC_JCK_DET_R_EINT);
case WM8350_IRQ_CODEC_MICSCD:
return wm8350_clear_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_CODEC_MICSCD_EINT);
case WM8350_IRQ_CODEC_MICD:
return wm8350_clear_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_CODEC_MICD_EINT);
case WM8350_IRQ_WKUP_OFF_STATE:
return wm8350_clear_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_WKUP_OFF_STATE_EINT);
case WM8350_IRQ_WKUP_HIB_STATE:
return wm8350_clear_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_WKUP_HIB_STATE_EINT);
case WM8350_IRQ_WKUP_CONV_FAULT:
return wm8350_clear_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_WKUP_CONV_FAULT_EINT);
case WM8350_IRQ_WKUP_WDOG_RST:
return wm8350_clear_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_WKUP_OFF_STATE_EINT);
case WM8350_IRQ_WKUP_GP_PWR_ON:
return wm8350_clear_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_WKUP_GP_PWR_ON_EINT);
case WM8350_IRQ_WKUP_ONKEY:
return wm8350_clear_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_WKUP_ONKEY_EINT);
case WM8350_IRQ_WKUP_GP_WAKEUP:
return wm8350_clear_bits(wm8350,
WM8350_COMPARATOR_INT_STATUS_MASK,
WM8350_IM_WKUP_GP_WAKEUP_EINT);
case WM8350_IRQ_GPIO(0):
return wm8350_clear_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP0_EINT);
case WM8350_IRQ_GPIO(1):
return wm8350_clear_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP1_EINT);
case WM8350_IRQ_GPIO(2):
return wm8350_clear_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP2_EINT);
case WM8350_IRQ_GPIO(3):
return wm8350_clear_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP3_EINT);
case WM8350_IRQ_GPIO(4):
return wm8350_clear_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP4_EINT);
case WM8350_IRQ_GPIO(5):
return wm8350_clear_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP5_EINT);
case WM8350_IRQ_GPIO(6):
return wm8350_clear_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP6_EINT);
case WM8350_IRQ_GPIO(7):
return wm8350_clear_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP7_EINT);
case WM8350_IRQ_GPIO(8):
return wm8350_clear_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP8_EINT);
case WM8350_IRQ_GPIO(9):
return wm8350_clear_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP9_EINT);
case WM8350_IRQ_GPIO(10):
return wm8350_clear_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP10_EINT);
case WM8350_IRQ_GPIO(11):
return wm8350_clear_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP11_EINT);
case WM8350_IRQ_GPIO(12):
return wm8350_clear_bits(wm8350,
WM8350_GPIO_INT_STATUS_MASK,
WM8350_IM_GP12_EINT);
default:
dev_warn(wm8350->dev, "Attempting to unmask unknown IRQ %d\n",
irq);
return -EINVAL;
}
return 0;
}
EXPORT_SYMBOL_GPL(wm8350_unmask_irq);
mfd: Add AUXADC support for WM8350 The auxiliary ADC in the WM8350 is shared between several subdevices so access to it needs to be arbitrated by the core driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-08 00:10:21 +00:00
int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
{
u16 reg, result = 0;
int tries = 5;
if (channel < WM8350_AUXADC_AUX1 || channel > WM8350_AUXADC_TEMP)
return -EINVAL;
if (channel >= WM8350_AUXADC_USB && channel <= WM8350_AUXADC_TEMP
&& (scale != 0 || vref != 0))
return -EINVAL;
mutex_lock(&wm8350->auxadc_mutex);
/* Turn on the ADC */
reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, reg | WM8350_AUXADC_ENA);
if (scale || vref) {
reg = scale << 13;
reg |= vref << 12;
wm8350_reg_write(wm8350, WM8350_AUX1_READBACK + channel, reg);
}
reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
reg |= 1 << channel | WM8350_AUXADC_POLL;
wm8350_reg_write(wm8350, WM8350_DIGITISER_CONTROL_1, reg);
do {
schedule_timeout_interruptible(1);
reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
mfd: Use the value of the final spin when reading the AUXADC Reverse the order of the tests for loop exit so we use a valid value before we time out. Vanishingly unlikely to happen since we retry for several times the expected conversion time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-03-01 19:11:58 +00:00
} while ((reg & WM8350_AUXADC_POLL) && --tries);
mfd: Add AUXADC support for WM8350 The auxiliary ADC in the WM8350 is shared between several subdevices so access to it needs to be arbitrated by the core driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-08 00:10:21 +00:00
if (!tries)
dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
else
result = wm8350_reg_read(wm8350,
WM8350_AUX1_READBACK + channel);
/* Turn off the ADC */
reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5,
reg & ~WM8350_AUXADC_ENA);
mutex_unlock(&wm8350->auxadc_mutex);
return result & WM8350_AUXADC_DATA1_MASK;
}
EXPORT_SYMBOL_GPL(wm8350_read_auxadc);
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
/*
* Cache is always host endian.
*/
mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:09:50 +00:00
static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode)
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
{
int i, ret = 0;
u16 value;
const u16 *reg_map;
mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:09:50 +00:00
switch (type) {
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
case 0:
mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:09:50 +00:00
switch (mode) {
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
case 0:
reg_map = wm8350_mode0_defaults;
break;
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
#endif
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1
mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:09:50 +00:00
case 1:
reg_map = wm8350_mode1_defaults;
break;
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
#endif
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2
mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:09:50 +00:00
case 2:
reg_map = wm8350_mode2_defaults;
break;
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
#endif
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3
mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:09:50 +00:00
case 3:
reg_map = wm8350_mode3_defaults;
break;
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
#endif
mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:09:50 +00:00
default:
dev_err(wm8350->dev,
"WM8350 configuration mode %d not supported\n",
mode);
return -EINVAL;
}
mfd: Add missing break from wm3850-core Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:20:14 +00:00
break;
mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:09:50 +00:00
mfd: Add WM8351 support The WM8351 is a WM8350 variant. As well as register default changes the WM8351 has fewer voltage and current regulators than the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:12:28 +00:00
case 1:
switch (mode) {
#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0
case 0:
reg_map = wm8351_mode0_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1
case 1:
reg_map = wm8351_mode1_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2
case 2:
reg_map = wm8351_mode2_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3
case 3:
reg_map = wm8351_mode3_defaults;
break;
#endif
default:
dev_err(wm8350->dev,
"WM8351 configuration mode %d not supported\n",
mode);
return -EINVAL;
}
break;
mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:09:50 +00:00
case 2:
switch (mode) {
#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0
case 0:
reg_map = wm8352_mode0_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1
case 1:
reg_map = wm8352_mode1_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2
case 2:
reg_map = wm8352_mode2_defaults;
break;
#endif
#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3
case 3:
reg_map = wm8352_mode3_defaults;
break;
#endif
default:
dev_err(wm8350->dev,
"WM8352 configuration mode %d not supported\n",
mode);
return -EINVAL;
}
break;
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
default:
mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:09:50 +00:00
dev_err(wm8350->dev,
"WM835x configuration mode %d not supported\n",
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
mode);
return -EINVAL;
}
wm8350->reg_cache =
mfd: Use bulk read to fill WM8350 register cache Some I2C controllers have high overheads for setting up I2C operations which makes the register cache setup on startup excessively slow since it does a lot of small transactions. Reduce this overhead by doing a bulk read of the entire register bank and filtering out what we don't need later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-04 21:43:55 +00:00
kmalloc(sizeof(u16) * (WM8350_MAX_REGISTER + 1), GFP_KERNEL);
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
if (wm8350->reg_cache == NULL)
return -ENOMEM;
/* Read the initial cache state back from the device - this is
* a PMIC so the device many not be in a virgin state and we
* can't rely on the silicon values.
*/
mfd: Use bulk read to fill WM8350 register cache Some I2C controllers have high overheads for setting up I2C operations which makes the register cache setup on startup excessively slow since it does a lot of small transactions. Reduce this overhead by doing a bulk read of the entire register bank and filtering out what we don't need later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-04 21:43:55 +00:00
ret = wm8350->read_dev(wm8350, 0,
sizeof(u16) * (WM8350_MAX_REGISTER + 1),
wm8350->reg_cache);
if (ret < 0) {
dev_err(wm8350->dev,
"failed to read initial cache values\n");
goto out;
}
/* Mask out uncacheable/unreadable bits and the audio. */
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
for (i = 0; i < WM8350_MAX_REGISTER; i++) {
if (wm8350_reg_io_map[i].readable &&
(i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) {
mfd: Use bulk read to fill WM8350 register cache Some I2C controllers have high overheads for setting up I2C operations which makes the register cache setup on startup excessively slow since it does a lot of small transactions. Reduce this overhead by doing a bulk read of the entire register bank and filtering out what we don't need later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-04 21:43:55 +00:00
value = be16_to_cpu(wm8350->reg_cache[i]);
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
value &= wm8350_reg_io_map[i].readable;
mfd: Don't store volatile bits in WM8350 register cache This makes the contents of the cache clearer and fixes incorrect initialisation of the cache for partially volatile registers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-20 21:58:50 +00:00
value &= ~wm8350_reg_io_map[i].vol;
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
wm8350->reg_cache[i] = value;
} else
wm8350->reg_cache[i] = reg_map[i];
}
out:
return ret;
}
mfd: Add WM8350 subdevice registration helper Most of the subdevices for the WM8350 code are registered in the same fashion so factor out the code to do the initial registration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:16 +00:00
/*
* Register a client device. This is non-fatal since there is no need to
* fail the entire device init due to a single platform device failing.
*/
static void wm8350_client_dev_register(struct wm8350 *wm8350,
const char *name,
struct platform_device **pdev)
{
int ret;
*pdev = platform_device_alloc(name, -1);
if (pdev == NULL) {
dev_err(wm8350->dev, "Failed to allocate %s\n", name);
return;
}
(*pdev)->dev.parent = wm8350->dev;
platform_set_drvdata(*pdev, wm8350);
ret = platform_device_add(*pdev);
if (ret != 0) {
dev_err(wm8350->dev, "Failed to register %s: %d\n", name, ret);
platform_device_put(*pdev);
*pdev = NULL;
}
}
mfd: Add WM8350 interrupt support The WM8350 has an interrupt line to the CPU which is shared by the devices on the CPU. This patch adds support for the interrupt controller within the WM8350 which identifies which identifies the interrupt cause. In common with other similar chips this is done outside the standard interrupt framework due to the need to access the interrupt controller over an interrupt-driven bus. This code was all originally written by Liam Girdwood with updates for submission by me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:14 +00:00
int wm8350_device_init(struct wm8350 *wm8350, int irq,
mfd: Add initialisation callback for WM8350 Some functions of the WM8350 require board-specific initialisation on startup. Provide a callback to the WM8350 driver in platform data for platforms to use to configure the chip. Use of a callback allows platforms to control the ordering of initialisation which can be important. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:13 +00:00
struct wm8350_platform_data *pdata)
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
{
mfd: Improve diagnostics for WM8350 ID register probe Check the return value of the device I/O functions when reading the ID registers so we can provide a more useful diagnostic when we're having trouble talking to the device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-04 20:09:38 +00:00
int ret;
mfd: Refactor WM8350 chip identification Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-24 19:22:58 +00:00
u16 id1, id2, mask_rev;
u16 cust_id, mode, chip_rev;
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
/* get WM8350 revision and config mode */
mfd: Improve diagnostics for WM8350 ID register probe Check the return value of the device I/O functions when reading the ID registers so we can provide a more useful diagnostic when we're having trouble talking to the device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-04 20:09:38 +00:00
ret = wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
if (ret != 0) {
dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
goto err;
}
ret = wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
if (ret != 0) {
dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
goto err;
}
ret = wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev),
&mask_rev);
if (ret != 0) {
dev_err(wm8350->dev, "Failed to read revision: %d\n", ret);
goto err;
}
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
id1 = be16_to_cpu(id1);
id2 = be16_to_cpu(id2);
mfd: Refactor WM8350 chip identification Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-24 19:22:58 +00:00
mask_rev = be16_to_cpu(mask_rev);
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
mfd: Refactor WM8350 chip identification Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-24 19:22:58 +00:00
if (id1 != 0x6143) {
dev_err(wm8350->dev,
"Device with ID %x is not a WM8350\n", id1);
ret = -ENODEV;
goto err;
}
mode = id2 & WM8350_CONF_STS_MASK >> 10;
cust_id = id2 & WM8350_CUST_ID_MASK;
chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12;
dev_info(wm8350->dev,
"CONF_STS %d, CUST_ID %d, MASK_REV %d, CHIP_REV %d\n",
mode, cust_id, mask_rev, chip_rev);
if (cust_id != 0) {
dev_err(wm8350->dev, "Unsupported CUST_ID\n");
ret = -ENODEV;
goto err;
}
switch (mask_rev) {
case 0:
mfd: Support configurable numbers of DCDCs and ISINKs on WM8350 Some WM8350 variants have fewer DCDCs and ISINKs. Identify these at probe and refuse to use the absent DCDCs when running on these chips. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:12:16 +00:00
wm8350->pmic.max_dcdc = WM8350_DCDC_6;
wm8350->pmic.max_isink = WM8350_ISINK_B;
mfd: Refactor WM8350 chip identification Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-24 19:22:58 +00:00
switch (chip_rev) {
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
case WM8350_REV_E:
mfd: Refactor WM8350 chip identification Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-24 19:22:58 +00:00
dev_info(wm8350->dev, "WM8350 Rev E\n");
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
break;
case WM8350_REV_F:
mfd: Refactor WM8350 chip identification Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-24 19:22:58 +00:00
dev_info(wm8350->dev, "WM8350 Rev F\n");
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
break;
case WM8350_REV_G:
mfd: Refactor WM8350 chip identification Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-24 19:22:58 +00:00
dev_info(wm8350->dev, "WM8350 Rev G\n");
mfd: Switch WM8350 revision detection to a feature based model Rather than check for chip revisions in the WM8350 drivers have the core code set flags for relevant differences. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-24 19:20:30 +00:00
wm8350->power.rev_g_coeff = 1;
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
break;
mfd: Add WM8350 revision H support No other software changes are required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-08 00:10:16 +00:00
case WM8350_REV_H:
mfd: Refactor WM8350 chip identification Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-24 19:22:58 +00:00
dev_info(wm8350->dev, "WM8350 Rev H\n");
mfd: Switch WM8350 revision detection to a feature based model Rather than check for chip revisions in the WM8350 drivers have the core code set flags for relevant differences. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-24 19:20:30 +00:00
wm8350->power.rev_g_coeff = 1;
mfd: Add WM8350 revision H support No other software changes are required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-08 00:10:16 +00:00
break;
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
default:
/* For safety we refuse to run on unknown hardware */
mfd: Refactor WM8350 chip identification Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-24 19:22:58 +00:00
dev_err(wm8350->dev, "Unknown WM8350 CHIP_REV\n");
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
ret = -ENODEV;
goto err;
}
mfd: Refactor WM8350 chip identification Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-24 19:22:58 +00:00
break;
mfd: Add WM8351 support The WM8351 is a WM8350 variant. As well as register default changes the WM8351 has fewer voltage and current regulators than the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:12:28 +00:00
case 1:
wm8350->pmic.max_dcdc = WM8350_DCDC_4;
wm8350->pmic.max_isink = WM8350_ISINK_A;
switch (chip_rev) {
case 0:
dev_info(wm8350->dev, "WM8351 Rev A\n");
wm8350->power.rev_g_coeff = 1;
break;
mfd: add support for WM8351 revision B No software visible difference from revision A. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-12 21:31:36 +00:00
case 1:
dev_info(wm8350->dev, "WM8351 Rev B\n");
wm8350->power.rev_g_coeff = 1;
break;
mfd: Add WM8351 support The WM8351 is a WM8350 variant. As well as register default changes the WM8351 has fewer voltage and current regulators than the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:12:28 +00:00
default:
dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
ret = -ENODEV;
goto err;
}
break;
mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:09:50 +00:00
case 2:
mfd: Support configurable numbers of DCDCs and ISINKs on WM8350 Some WM8350 variants have fewer DCDCs and ISINKs. Identify these at probe and refuse to use the absent DCDCs when running on these chips. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:12:16 +00:00
wm8350->pmic.max_dcdc = WM8350_DCDC_6;
wm8350->pmic.max_isink = WM8350_ISINK_B;
mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:09:50 +00:00
switch (chip_rev) {
case 0:
dev_info(wm8350->dev, "WM8352 Rev A\n");
wm8350->power.rev_g_coeff = 1;
break;
default:
dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n");
ret = -ENODEV;
goto err;
}
break;
mfd: Refactor WM8350 chip identification Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-24 19:22:58 +00:00
default:
dev_err(wm8350->dev, "Unknown MASK_REV\n");
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
ret = -ENODEV;
goto err;
}
mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 22:09:50 +00:00
ret = wm8350_create_cache(wm8350, mask_rev, mode);
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
if (ret < 0) {
mfd: Refactor WM8350 chip identification Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-24 19:22:58 +00:00
dev_err(wm8350->dev, "Failed to create register cache\n");
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
return ret;
}
mfd: Ensure all WM8350 IRQs are masked at startup The IRQs might have been left enabled in hardware, generating spurious IRQs before the drivers have registered. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-06 14:28:15 +00:00
wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF);
wm8350_reg_write(wm8350, WM8350_INT_STATUS_1_MASK, 0xFFFF);
wm8350_reg_write(wm8350, WM8350_INT_STATUS_2_MASK, 0xFFFF);
wm8350_reg_write(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, 0xFFFF);
wm8350_reg_write(wm8350, WM8350_GPIO_INT_STATUS_MASK, 0xFFFF);
wm8350_reg_write(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK, 0xFFFF);
mfd: Add AUXADC support for WM8350 The auxiliary ADC in the WM8350 is shared between several subdevices so access to it needs to be arbitrated by the core driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-08 00:10:21 +00:00
mutex_init(&wm8350->auxadc_mutex);
mfd: Add WM8350 interrupt support The WM8350 has an interrupt line to the CPU which is shared by the devices on the CPU. This patch adds support for the interrupt controller within the WM8350 which identifies which identifies the interrupt cause. In common with other similar chips this is done outside the standard interrupt framework due to the need to access the interrupt controller over an interrupt-driven bus. This code was all originally written by Liam Girdwood with updates for submission by me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:14 +00:00
mutex_init(&wm8350->irq_mutex);
INIT_WORK(&wm8350->irq_work, wm8350_irq_worker);
mfd: Don't use NO_IRQ in WM8350 NO_IRQ is only defined on some architectures - the general way to test for an invalid IRQ in the modern kernel is by comparing with zero. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-15 10:28:06 +00:00
if (irq) {
mfd: Support active high IRQs on WM835x Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-06 14:27:13 +00:00
int flags = 0;
if (pdata && pdata->irq_high) {
flags |= IRQF_TRIGGER_HIGH;
wm8350_set_bits(wm8350, WM8350_SYSTEM_CONTROL_1,
WM8350_IRQ_POL);
} else {
flags |= IRQF_TRIGGER_LOW;
wm8350_clear_bits(wm8350, WM8350_SYSTEM_CONTROL_1,
WM8350_IRQ_POL);
}
ret = request_irq(irq, wm8350_irq, flags,
mfd: Add WM8350 interrupt support The WM8350 has an interrupt line to the CPU which is shared by the devices on the CPU. This patch adds support for the interrupt controller within the WM8350 which identifies which identifies the interrupt cause. In common with other similar chips this is done outside the standard interrupt framework due to the need to access the interrupt controller over an interrupt-driven bus. This code was all originally written by Liam Girdwood with updates for submission by me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:14 +00:00
"wm8350", wm8350);
if (ret != 0) {
dev_err(wm8350->dev, "Failed to request IRQ: %d\n",
ret);
goto err;
}
} else {
dev_err(wm8350->dev, "No IRQ configured\n");
goto err;
}
wm8350->chip_irq = irq;
mfd: Initialise WM8350 interrupts earlier Ensure that the interrupt handling is configured before we do platform specific init. This allows the platform specific initialisation to configure things which use interrupts safely. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-04 19:49:52 +00:00
if (pdata && pdata->init) {
ret = pdata->init(wm8350);
if (ret != 0) {
dev_err(wm8350->dev, "Platform init() failed: %d\n",
ret);
goto err;
}
}
mfd: Add WM8350 interrupt support The WM8350 has an interrupt line to the CPU which is shared by the devices on the CPU. This patch adds support for the interrupt controller within the WM8350 which identifies which identifies the interrupt cause. In common with other similar chips this is done outside the standard interrupt framework due to the need to access the interrupt controller over an interrupt-driven bus. This code was all originally written by Liam Girdwood with updates for submission by me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:14 +00:00
wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);
mfd: Add placeholders for WM8350 client devices In order to avoid merge problems further down the line add placeholders for several of the WM8350 client devices and register them, otherwise the patches adding the client devices will all try to update the same code. Also remove redundant checks for null regulator platform devices while we're at it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-13 14:45:22 +00:00
wm8350_client_dev_register(wm8350, "wm8350-codec",
&(wm8350->codec.pdev));
wm8350_client_dev_register(wm8350, "wm8350-gpio",
&(wm8350->gpio.pdev));
wm8350_client_dev_register(wm8350, "wm8350-power",
&(wm8350->power.pdev));
wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev));
wm8350_client_dev_register(wm8350, "wm8350-wdt", &(wm8350->wdt.pdev));
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
return 0;
err:
kfree(wm8350->reg_cache);
return ret;
}
EXPORT_SYMBOL_GPL(wm8350_device_init);
void wm8350_device_exit(struct wm8350 *wm8350)
{
regulator: Add WM8350 regulator support The WM8350 features six DCDC convertors (four buck and two boost), four LDO voltage regulators and two constant current sinks. This driver adds support for these through the regulator API. This driver was written by Liam Girdwood with updates for submission from Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:15 +00:00
int i;
leds: Add WM8350 LED driver The voltage and current regulators on the WM8350 AudioPlus PMIC can be used in concert to provide a power efficient LED driver. This driver implements support for this within the standard LED class. Platform initialisation code should configure the LED hardware in the init callback provided by the WM8350 core driver. The callback should use wm8350_isink_set_flash(), wm8350_dcdc25_set_mode() and wm8350_dcdc_set_slot() to configure the operating parameters of the regulators for their hardware and then then use wm8350_register_led() to instantiate the LED driver. This driver was originally written by Liam Girdwood, though it has been extensively modified since then. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-12-04 16:52:33 +00:00
for (i = 0; i < ARRAY_SIZE(wm8350->pmic.led); i++)
platform_device_unregister(wm8350->pmic.led[i].pdev);
regulator: Add WM8350 regulator support The WM8350 features six DCDC convertors (four buck and two boost), four LDO voltage regulators and two constant current sinks. This driver adds support for these through the regulator API. This driver was written by Liam Girdwood with updates for submission from Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:15 +00:00
for (i = 0; i < ARRAY_SIZE(wm8350->pmic.pdev); i++)
mfd: Add placeholders for WM8350 client devices In order to avoid merge problems further down the line add placeholders for several of the WM8350 client devices and register them, otherwise the patches adding the client devices will all try to update the same code. Also remove redundant checks for null regulator platform devices while we're at it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-13 14:45:22 +00:00
platform_device_unregister(wm8350->pmic.pdev[i]);
platform_device_unregister(wm8350->wdt.pdev);
platform_device_unregister(wm8350->rtc.pdev);
platform_device_unregister(wm8350->power.pdev);
platform_device_unregister(wm8350->gpio.pdev);
platform_device_unregister(wm8350->codec.pdev);
regulator: Add WM8350 regulator support The WM8350 features six DCDC convertors (four buck and two boost), four LDO voltage regulators and two constant current sinks. This driver adds support for these through the regulator API. This driver was written by Liam Girdwood with updates for submission from Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:15 +00:00
mfd: Add WM8350 interrupt support The WM8350 has an interrupt line to the CPU which is shared by the devices on the CPU. This patch adds support for the interrupt controller within the WM8350 which identifies which identifies the interrupt cause. In common with other similar chips this is done outside the standard interrupt framework due to the need to access the interrupt controller over an interrupt-driven bus. This code was all originally written by Liam Girdwood with updates for submission by me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:14 +00:00
free_irq(wm8350->chip_irq, wm8350);
flush_work(&wm8350->irq_work);
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
kfree(wm8350->reg_cache);
}
EXPORT_SYMBOL_GPL(wm8350_device_exit);
mfd: Add WM8350 interrupt support The WM8350 has an interrupt line to the CPU which is shared by the devices on the CPU. This patch adds support for the interrupt controller within the WM8350 which identifies which identifies the interrupt cause. In common with other similar chips this is done outside the standard interrupt framework due to the need to access the interrupt controller over an interrupt-driven bus. This code was all originally written by Liam Girdwood with updates for submission by me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:14 +00:00
MODULE_DESCRIPTION("WM8350 AudioPlus PMIC core driver");
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
MODULE_LICENSE("GPL");
Reference in a new issue Copy permalink