linux/drivers/net/wireless/rt2x00/rt61pci.c

2568 lines
75 KiB
C
Raw Normal View History

/*
Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt61pci
Abstract: rt61pci device specific routines.
Supported chipsets: RT2561, RT2561s, RT2661.
*/
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/eeprom_93cx6.h>
#include "rt2x00.h"
#include "rt2x00pci.h"
#include "rt61pci.h"
/*
* Register access.
* BBP and RF register require indirect register access,
* and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this.
* These indirect registers work with busy bits,
* and we will try maximal REGISTER_BUSY_COUNT times to access
* the register while taking a REGISTER_BUSY_DELAY us delay
* between each attampt. When the busy bit is still set at that time,
* the access attempt is considered to have failed,
* and we will print an error.
*/
static u32 rt61pci_bbp_check(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
unsigned int i;
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt2x00pci_register_read(rt2x00dev, PHY_CSR3, &reg);
if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY))
break;
udelay(REGISTER_BUSY_DELAY);
}
return reg;
}
static void rt61pci_bbp_write(struct rt2x00_dev *rt2x00dev,
const unsigned int word, const u8 value)
{
u32 reg;
/*
* Wait until the BBP becomes ready.
*/
reg = rt61pci_bbp_check(rt2x00dev);
if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
return;
}
/*
* Write the data into the BBP.
*/
reg = 0;
rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 0);
rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg);
}
static void rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u8 *value)
{
u32 reg;
/*
* Wait until the BBP becomes ready.
*/
reg = rt61pci_bbp_check(rt2x00dev);
if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
return;
}
/*
* Write the request into the BBP.
*/
reg = 0;
rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 1);
rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg);
/*
* Wait until the BBP becomes ready.
*/
reg = rt61pci_bbp_check(rt2x00dev);
if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
*value = 0xff;
return;
}
*value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
}
static void rt61pci_rf_write(struct rt2x00_dev *rt2x00dev,
const unsigned int word, const u32 value)
{
u32 reg;
unsigned int i;
if (!word)
return;
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt2x00pci_register_read(rt2x00dev, PHY_CSR4, &reg);
if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY))
goto rf_write;
udelay(REGISTER_BUSY_DELAY);
}
ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n");
return;
rf_write:
reg = 0;
rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS, 21);
rt2x00_set_field32(&reg, PHY_CSR4_IF_SELECT, 0);
rt2x00_set_field32(&reg, PHY_CSR4_BUSY, 1);
rt2x00pci_register_write(rt2x00dev, PHY_CSR4, reg);
rt2x00_rf_write(rt2x00dev, word, value);
}
static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
const u8 command, const u8 token,
const u8 arg0, const u8 arg1)
{
u32 reg;
rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CSR, &reg);
if (rt2x00_get_field32(reg, H2M_MAILBOX_CSR_OWNER)) {
ERROR(rt2x00dev, "mcu request error. "
"Request 0x%02x failed for token 0x%02x.\n",
command, token);
return;
}
rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);
rt2x00pci_register_read(rt2x00dev, HOST_CMD_CSR, &reg);
rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
rt2x00_set_field32(&reg, HOST_CMD_CSR_INTERRUPT_MCU, 1);
rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
}
static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
{
struct rt2x00_dev *rt2x00dev = eeprom->data;
u32 reg;
rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN);
eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT);
eeprom->reg_data_clock =
!!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK);
eeprom->reg_chip_select =
!!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT);
}
static void rt61pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
{
struct rt2x00_dev *rt2x00dev = eeprom->data;
u32 reg = 0;
rt2x00_set_field32(&reg, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in);
rt2x00_set_field32(&reg, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out);
rt2x00_set_field32(&reg, E2PROM_CSR_DATA_CLOCK,
!!eeprom->reg_data_clock);
rt2x00_set_field32(&reg, E2PROM_CSR_CHIP_SELECT,
!!eeprom->reg_chip_select);
rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
}
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
static void rt61pci_read_csr(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u32 *data)
{
rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data);
}
static void rt61pci_write_csr(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u32 data)
{
rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data);
}
static const struct rt2x00debug rt61pci_rt2x00debug = {
.owner = THIS_MODULE,
.csr = {
.read = rt61pci_read_csr,
.write = rt61pci_write_csr,
.word_size = sizeof(u32),
.word_count = CSR_REG_SIZE / sizeof(u32),
},
.eeprom = {
.read = rt2x00_eeprom_read,
.write = rt2x00_eeprom_write,
.word_size = sizeof(u16),
.word_count = EEPROM_SIZE / sizeof(u16),
},
.bbp = {
.read = rt61pci_bbp_read,
.write = rt61pci_bbp_write,
.word_size = sizeof(u8),
.word_count = BBP_SIZE / sizeof(u8),
},
.rf = {
.read = rt2x00_rf_read,
.write = rt61pci_rf_write,
.word_size = sizeof(u32),
.word_count = RF_SIZE / sizeof(u32),
},
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
#ifdef CONFIG_RT61PCI_RFKILL
static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
return rt2x00_get_field32(reg, MAC_CSR13_BIT5);;
}
#else
#define rt61pci_rfkill_poll NULL
#endif /* CONFIG_RT61PCI_RFKILL */
/*
* Configuration handlers.
*/
static void rt61pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, __le32 *mac)
{
u32 tmp;
tmp = le32_to_cpu(mac[1]);
rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
mac[1] = cpu_to_le32(tmp);
rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, mac,
(2 * sizeof(__le32)));
}
static void rt61pci_config_bssid(struct rt2x00_dev *rt2x00dev, __le32 *bssid)
{
u32 tmp;
tmp = le32_to_cpu(bssid[1]);
rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3);
bssid[1] = cpu_to_le32(tmp);
rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, bssid,
(2 * sizeof(__le32)));
}
static void rt61pci_config_type(struct rt2x00_dev *rt2x00dev, const int type,
const int tsf_sync)
{
u32 reg;
/*
* Clear current synchronisation setup.
* For the Beacon base registers we only need to clear
* the first byte since that byte contains the VALID and OWNER
* bits which (when set to 0) will invalidate the entire beacon.
*/
rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0);
rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
/*
* Enable synchronisation.
*/
rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE,
(tsf_sync == TSF_SYNC_BEACON));
rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, tsf_sync);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
}
static void rt61pci_config_preamble(struct rt2x00_dev *rt2x00dev,
const int short_preamble,
const int ack_timeout,
const int ack_consume_time)
{
u32 reg;
rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, ack_timeout);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
!!short_preamble);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
}
static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev,
const int basic_rate_mask)
{
rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, basic_rate_mask);
}
static void rt61pci_config_channel(struct rt2x00_dev *rt2x00dev,
struct rf_channel *rf, const int txpower)
{
u8 r3;
u8 r94;
u8 smart;
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
rt2x00_rf(&rt2x00dev->chip, RF2527));
rt61pci_bbp_read(rt2x00dev, 3, &r3);
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
rt61pci_bbp_write(rt2x00dev, 3, r3);
r94 = 6;
if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94))
r94 += txpower - MAX_TXPOWER;
else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94))
r94 += txpower;
rt61pci_bbp_write(rt2x00dev, 94, r94);
rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
udelay(200);
rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
rt61pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
udelay(200);
rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
msleep(1);
}
static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev,
const int txpower)
{
struct rf_channel rf;
rt2x00_rf_read(rt2x00dev, 1, &rf.rf1);
rt2x00_rf_read(rt2x00dev, 2, &rf.rf2);
rt2x00_rf_read(rt2x00dev, 3, &rf.rf3);
rt2x00_rf_read(rt2x00dev, 4, &rf.rf4);
rt61pci_config_channel(rt2x00dev, &rf, txpower);
}
static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
struct antenna_setup *ant)
{
u8 r3;
u8 r4;
u8 r77;
rt61pci_bbp_read(rt2x00dev, 3, &r3);
rt61pci_bbp_read(rt2x00dev, 4, &r4);
rt61pci_bbp_read(rt2x00dev, 77, &r77);
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE,
rt2x00_rf(&rt2x00dev->chip, RF5325));
/*
* Configure the RX antenna.
*/
switch (ant->rx) {
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
(rt2x00dev->curr_hwmode != HWMODE_A));
break;
case ANTENNA_A:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
if (rt2x00dev->curr_hwmode == HWMODE_A)
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
else
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
break;
case ANTENNA_SW_DIVERSITY:
/*
* NOTE: We should never come here because rt2x00lib is
* supposed to catch this and send us the correct antenna
* explicitely. However we are nog going to bug about this.
* Instead, just default to antenna B.
*/
case ANTENNA_B:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
if (rt2x00dev->curr_hwmode == HWMODE_A)
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
else
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
break;
}
rt61pci_bbp_write(rt2x00dev, 77, r77);
rt61pci_bbp_write(rt2x00dev, 3, r3);
rt61pci_bbp_write(rt2x00dev, 4, r4);
}
static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
struct antenna_setup *ant)
{
u8 r3;
u8 r4;
u8 r77;
rt61pci_bbp_read(rt2x00dev, 3, &r3);
rt61pci_bbp_read(rt2x00dev, 4, &r4);
rt61pci_bbp_read(rt2x00dev, 77, &r77);
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE,
rt2x00_rf(&rt2x00dev->chip, RF2529));
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
!test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
/*
* Configure the RX antenna.
*/
switch (ant->rx) {
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
break;
case ANTENNA_A:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
break;
case ANTENNA_SW_DIVERSITY:
/*
* NOTE: We should never come here because rt2x00lib is
* supposed to catch this and send us the correct antenna
* explicitely. However we are nog going to bug about this.
* Instead, just default to antenna B.
*/
case ANTENNA_B:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
break;
}
rt61pci_bbp_write(rt2x00dev, 77, r77);
rt61pci_bbp_write(rt2x00dev, 3, r3);
rt61pci_bbp_write(rt2x00dev, 4, r4);
}
static void rt61pci_config_antenna_2529_rx(struct rt2x00_dev *rt2x00dev,
const int p1, const int p2)
{
u32 reg;
rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
rt2x00_set_field32(&reg, MAC_CSR13_BIT4, p1);
rt2x00_set_field32(&reg, MAC_CSR13_BIT12, 0);
rt2x00_set_field32(&reg, MAC_CSR13_BIT3, !p2);
rt2x00_set_field32(&reg, MAC_CSR13_BIT11, 0);
rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
}
static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev,
struct antenna_setup *ant)
{
u8 r3;
u8 r4;
u8 r77;
rt61pci_bbp_read(rt2x00dev, 3, &r3);
rt61pci_bbp_read(rt2x00dev, 4, &r4);
rt61pci_bbp_read(rt2x00dev, 77, &r77);
/* FIXME: Antenna selection for the rf 2529 is very confusing in the
* legacy driver. The code below should be ok for non-diversity setups.
*/
/*
* Configure the RX antenna.
*/
switch (ant->rx) {
case ANTENNA_A:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0);
break;
case ANTENNA_SW_DIVERSITY:
case ANTENNA_HW_DIVERSITY:
/*
* NOTE: We should never come here because rt2x00lib is
* supposed to catch this and send us the correct antenna
* explicitely. However we are nog going to bug about this.
* Instead, just default to antenna B.
*/
case ANTENNA_B:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1);
break;
}
rt61pci_bbp_write(rt2x00dev, 77, r77);
rt61pci_bbp_write(rt2x00dev, 3, r3);
rt61pci_bbp_write(rt2x00dev, 4, r4);
}
struct antenna_sel {
u8 word;
/*
* value[0] -> non-LNA
* value[1] -> LNA
*/
u8 value[2];
};
static const struct antenna_sel antenna_sel_a[] = {
{ 96, { 0x58, 0x78 } },
{ 104, { 0x38, 0x48 } },
{ 75, { 0xfe, 0x80 } },
{ 86, { 0xfe, 0x80 } },
{ 88, { 0xfe, 0x80 } },
{ 35, { 0x60, 0x60 } },
{ 97, { 0x58, 0x58 } },
{ 98, { 0x58, 0x58 } },
};
static const struct antenna_sel antenna_sel_bg[] = {
{ 96, { 0x48, 0x68 } },
{ 104, { 0x2c, 0x3c } },
{ 75, { 0xfe, 0x80 } },
{ 86, { 0xfe, 0x80 } },
{ 88, { 0xfe, 0x80 } },
{ 35, { 0x50, 0x50 } },
{ 97, { 0x48, 0x48 } },
{ 98, { 0x48, 0x48 } },
};
static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
struct antenna_setup *ant)
{
const struct antenna_sel *sel;
unsigned int lna;
unsigned int i;
u32 reg;
if (rt2x00dev->curr_hwmode == HWMODE_A) {
sel = antenna_sel_a;
lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
} else {
sel = antenna_sel_bg;
lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
}
for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
rt61pci_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
rt2x00pci_register_read(rt2x00dev, PHY_CSR0, &reg);
rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG,
(rt2x00dev->curr_hwmode == HWMODE_B ||
rt2x00dev->curr_hwmode == HWMODE_G));
rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A,
(rt2x00dev->curr_hwmode == HWMODE_A));
rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg);
if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
rt2x00_rf(&rt2x00dev->chip, RF5325))
rt61pci_config_antenna_5x(rt2x00dev, ant);
else if (rt2x00_rf(&rt2x00dev->chip, RF2527))
rt61pci_config_antenna_2x(rt2x00dev, ant);
else if (rt2x00_rf(&rt2x00dev->chip, RF2529)) {
if (test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags))
rt61pci_config_antenna_2x(rt2x00dev, ant);
else
rt61pci_config_antenna_2529(rt2x00dev, ant);
}
}
static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf)
{
u32 reg;
rt2x00pci_register_read(rt2x00dev, MAC_CSR9, &reg);
rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME, libconf->slot_time);
rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg);
rt2x00pci_register_read(rt2x00dev, MAC_CSR8, &reg);
rt2x00_set_field32(&reg, MAC_CSR8_SIFS, libconf->sifs);
rt2x00_set_field32(&reg, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3);
rt2x00_set_field32(&reg, MAC_CSR8_EIFS, libconf->eifs);
rt2x00pci_register_write(rt2x00dev, MAC_CSR8, reg);
rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
libconf->conf->beacon_int * 16);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
}
static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
const unsigned int flags,
struct rt2x00lib_conf *libconf)
{
if (flags & CONFIG_UPDATE_PHYMODE)
rt61pci_config_phymode(rt2x00dev, libconf->basic_rates);
if (flags & CONFIG_UPDATE_CHANNEL)
rt61pci_config_channel(rt2x00dev, &libconf->rf,
libconf->conf->power_level);
if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
rt61pci_config_txpower(rt2x00dev, libconf->conf->power_level);
if (flags & CONFIG_UPDATE_ANTENNA)
rt61pci_config_antenna(rt2x00dev, &libconf->ant);
if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
rt61pci_config_duration(rt2x00dev, libconf);
}
/*
* LED functions.
*/
static void rt61pci_enable_led(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
u8 arg0;
u8 arg1;
rt2x00pci_register_read(rt2x00dev, MAC_CSR14, &reg);
rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, 70);
rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, 30);
rt2x00pci_register_write(rt2x00dev, MAC_CSR14, reg);
rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1);
rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS,
(rt2x00dev->rx_status.phymode == MODE_IEEE80211A));
rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS,
(rt2x00dev->rx_status.phymode != MODE_IEEE80211A));
arg0 = rt2x00dev->led_reg & 0xff;
arg1 = (rt2x00dev->led_reg >> 8) & 0xff;
rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1);
}
static void rt61pci_disable_led(struct rt2x00_dev *rt2x00dev)
{
u16 led_reg;
u8 arg0;
u8 arg1;
led_reg = rt2x00dev->led_reg;
rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 0);
rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 0);
rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 0);
arg0 = led_reg & 0xff;
arg1 = (led_reg >> 8) & 0xff;
rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1);
}
static void rt61pci_activity_led(struct rt2x00_dev *rt2x00dev, int rssi)
{
u8 led;
if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH)
return;
/*
* Led handling requires a positive value for the rssi,
* to do that correctly we need to add the correction.
*/
rssi += rt2x00dev->rssi_offset;
if (rssi <= 30)
led = 0;
else if (rssi <= 39)
led = 1;
else if (rssi <= 49)
led = 2;
else if (rssi <= 53)
led = 3;
else if (rssi <= 63)
led = 4;
else
led = 5;
rt61pci_mcu_request(rt2x00dev, MCU_LED_STRENGTH, 0xff, led, 0);
}
/*
* Link tuning
*/
static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev,
struct link_qual *qual)
{
u32 reg;
/*
* Update FCS error count from register.
*/
rt2x00pci_register_read(rt2x00dev, STA_CSR0, &reg);
qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR);
/*
* Update False CCA count from register.
*/
rt2x00pci_register_read(rt2x00dev, STA_CSR1, &reg);
qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
}
static void rt61pci_reset_tuner(struct rt2x00_dev *rt2x00dev)
{
rt61pci_bbp_write(rt2x00dev, 17, 0x20);
rt2x00dev->link.vgc_level = 0x20;
}
static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev)
{
int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
u8 r17;
u8 up_bound;
u8 low_bound;
/*
* Update Led strength
*/
rt61pci_activity_led(rt2x00dev, rssi);
rt61pci_bbp_read(rt2x00dev, 17, &r17);
/*
* Determine r17 bounds.
*/
if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
low_bound = 0x28;
up_bound = 0x48;
if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
low_bound += 0x10;
up_bound += 0x10;
}
} else {
low_bound = 0x20;
up_bound = 0x40;
if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
low_bound += 0x10;
up_bound += 0x10;
}
}
/*
* Special big-R17 for very short distance
*/
if (rssi >= -35) {
if (r17 != 0x60)
rt61pci_bbp_write(rt2x00dev, 17, 0x60);
return;
}
/*
* Special big-R17 for short distance
*/
if (rssi >= -58) {
if (r17 != up_bound)
rt61pci_bbp_write(rt2x00dev, 17, up_bound);
return;
}
/*
* Special big-R17 for middle-short distance
*/
if (rssi >= -66) {
low_bound += 0x10;
if (r17 != low_bound)
rt61pci_bbp_write(rt2x00dev, 17, low_bound);
return;
}
/*
* Special mid-R17 for middle distance
*/
if (rssi >= -74) {
low_bound += 0x08;
if (r17 != low_bound)
rt61pci_bbp_write(rt2x00dev, 17, low_bound);
return;
}
/*
* Special case: Change up_bound based on the rssi.
* Lower up_bound when rssi is weaker then -74 dBm.
*/
up_bound -= 2 * (-74 - rssi);
if (low_bound > up_bound)
up_bound = low_bound;
if (r17 > up_bound) {
rt61pci_bbp_write(rt2x00dev, 17, up_bound);
return;
}
/*
* r17 does not yet exceed upper limit, continue and base
* the r17 tuning on the false CCA count.
*/
if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) {
if (++r17 > up_bound)
r17 = up_bound;
rt61pci_bbp_write(rt2x00dev, 17, r17);
} else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) {
if (--r17 < low_bound)
r17 = low_bound;
rt61pci_bbp_write(rt2x00dev, 17, r17);
}
}
/*
* Firmware name function.
*/
static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
{
char *fw_name;
switch (rt2x00dev->chip.rt) {
case RT2561:
fw_name = FIRMWARE_RT2561;
break;
case RT2561s:
fw_name = FIRMWARE_RT2561s;
break;
case RT2661:
fw_name = FIRMWARE_RT2661;
break;
default:
fw_name = NULL;
break;
}
return fw_name;
}
/*
* Initialization functions.
*/
static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
const size_t len)
{
int i;
u32 reg;
/*
* Wait for stable hardware.
*/
for (i = 0; i < 100; i++) {
rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
if (reg)
break;
msleep(1);
}
if (!reg) {
ERROR(rt2x00dev, "Unstable hardware.\n");
return -EBUSY;
}
/*
* Prepare MCU and mailbox for firmware loading.
*/
reg = 0;
rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 1);
rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);
rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, 0);
/*
* Write firmware to device.
*/
reg = 0;
rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 1);
rt2x00_set_field32(&reg, MCU_CNTL_CSR_SELECT_BANK, 1);
rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
data, len);
rt2x00_set_field32(&reg, MCU_CNTL_CSR_SELECT_BANK, 0);
rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 0);
rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
for (i = 0; i < 100; i++) {
rt2x00pci_register_read(rt2x00dev, MCU_CNTL_CSR, &reg);
if (rt2x00_get_field32(reg, MCU_CNTL_CSR_READY))
break;
msleep(1);
}
if (i == 100) {
ERROR(rt2x00dev, "MCU Control register not ready.\n");
return -EBUSY;
}
/*
* Reset MAC and BBP registers.
*/
reg = 0;
rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
return 0;
}
static void rt61pci_init_rxring(struct rt2x00_dev *rt2x00dev)
{
struct data_ring *ring = rt2x00dev->rx;
__le32 *rxd;
unsigned int i;
u32 word;
memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
for (i = 0; i < ring->stats.limit; i++) {
rxd = ring->entry[i].priv;
rt2x00_desc_read(rxd, 5, &word);
rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS,
ring->entry[i].data_dma);
rt2x00_desc_write(rxd, 5, word);
rt2x00_desc_read(rxd, 0, &word);
rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
rt2x00_desc_write(rxd, 0, word);
}
rt2x00_ring_index_clear(rt2x00dev->rx);
}
static void rt61pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue)
{
struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue);
__le32 *txd;
unsigned int i;
u32 word;
memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
for (i = 0; i < ring->stats.limit; i++) {
txd = ring->entry[i].priv;
rt2x00_desc_read(txd, 1, &word);
rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
rt2x00_desc_write(txd, 1, word);
rt2x00_desc_read(txd, 5, &word);
rt2x00_set_field32(&word, TXD_W5_PID_TYPE,
ring->queue_idx);
rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE,
ring->entry[i].entry_idx);
rt2x00_desc_write(txd, 5, word);
rt2x00_desc_read(txd, 6, &word);
rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS,
ring->entry[i].data_dma);
rt2x00_desc_write(txd, 6, word);
rt2x00_desc_read(txd, 0, &word);
rt2x00_set_field32(&word, TXD_W0_VALID, 0);
rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
rt2x00_desc_write(txd, 0, word);
}
rt2x00_ring_index_clear(ring);
}
static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
/*
* Initialize rings.
*/
rt61pci_init_rxring(rt2x00dev);
rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA2);
rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA3);
rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA4);
/*
* Initialize registers.
*/
rt2x00pci_register_read(rt2x00dev, TX_RING_CSR0, &reg);
rt2x00_set_field32(&reg, TX_RING_CSR0_AC0_RING_SIZE,
rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit);
rt2x00_set_field32(&reg, TX_RING_CSR0_AC1_RING_SIZE,
rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit);
rt2x00_set_field32(&reg, TX_RING_CSR0_AC2_RING_SIZE,
rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].stats.limit);
rt2x00_set_field32(&reg, TX_RING_CSR0_AC3_RING_SIZE,
rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].stats.limit);
rt2x00pci_register_write(rt2x00dev, TX_RING_CSR0, reg);
rt2x00pci_register_read(rt2x00dev, TX_RING_CSR1, &reg);
rt2x00_set_field32(&reg, TX_RING_CSR1_MGMT_RING_SIZE,
rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].stats.limit);
rt2x00_set_field32(&reg, TX_RING_CSR1_TXD_SIZE,
rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size /
4);
rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg);
rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, &reg);
rt2x00_set_field32(&reg, AC0_BASE_CSR_RING_REGISTER,
rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma);
rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg);
rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, &reg);
rt2x00_set_field32(&reg, AC1_BASE_CSR_RING_REGISTER,
rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma);
rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg);
rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, &reg);
rt2x00_set_field32(&reg, AC2_BASE_CSR_RING_REGISTER,
rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].data_dma);
rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg);
rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, &reg);
rt2x00_set_field32(&reg, AC3_BASE_CSR_RING_REGISTER,
rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].data_dma);
rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg);
rt2x00pci_register_read(rt2x00dev, MGMT_BASE_CSR, &reg);
rt2x00_set_field32(&reg, MGMT_BASE_CSR_RING_REGISTER,
rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].data_dma);
rt2x00pci_register_write(rt2x00dev, MGMT_BASE_CSR, reg);
rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, &reg);
rt2x00_set_field32(&reg, RX_RING_CSR_RING_SIZE,
rt2x00dev->rx->stats.limit);
rt2x00_set_field32(&reg, RX_RING_CSR_RXD_SIZE,
rt2x00dev->rx->desc_size / 4);
rt2x00_set_field32(&reg, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4);
rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg);
rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, &reg);
rt2x00_set_field32(&reg, RX_BASE_CSR_RING_REGISTER,
rt2x00dev->rx->data_dma);
rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg);
rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, &reg);
rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC0, 2);
rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC1, 2);
rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC2, 2);
rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC3, 2);
rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_MGMT, 0);
rt2x00pci_register_write(rt2x00dev, TX_DMA_DST_CSR, reg);
rt2x00pci_register_read(rt2x00dev, LOAD_TX_RING_CSR, &reg);
rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC0, 1);
rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1);
rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1);
rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1);
rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_MGMT, 1);
rt2x00pci_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg);
rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, &reg);
rt2x00_set_field32(&reg, RX_CNTL_CSR_LOAD_RXD, 1);
rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg);
return 0;
}
static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
rt2x00_set_field32(&reg, TXRX_CSR0_AUTO_TX_SEQ, 1);
rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
rt2x00_set_field32(&reg, TXRX_CSR0_TX_WITHOUT_WAITING, 0);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
rt2x00pci_register_read(rt2x00dev, TXRX_CSR1, &reg);
rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */
rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0_VALID, 1);
rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1, 30); /* Rssi */
rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1_VALID, 1);
rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */
rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2_VALID, 1);
rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3, 30); /* Rssi */
rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3_VALID, 1);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR1, reg);
/*
* CCK TXD BBP registers
*/
rt2x00pci_register_read(rt2x00dev, TXRX_CSR2, &reg);
rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0, 13);
rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0_VALID, 1);
rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1, 12);
rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1_VALID, 1);
rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2, 11);
rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2_VALID, 1);
rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3, 10);
rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3_VALID, 1);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR2, reg);
/*
* OFDM TXD BBP registers
*/
rt2x00pci_register_read(rt2x00dev, TXRX_CSR3, &reg);
rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0, 7);
rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0_VALID, 1);
rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1, 6);
rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1_VALID, 1);
rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2, 5);
rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2_VALID, 1);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR3, reg);
rt2x00pci_register_read(rt2x00dev, TXRX_CSR7, &reg);
rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_6MBS, 59);
rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_9MBS, 53);
rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_12MBS, 49);
rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_18MBS, 46);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR7, reg);
rt2x00pci_register_read(rt2x00dev, TXRX_CSR8, &reg);
rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_24MBS, 44);
rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_36MBS, 42);
rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_48MBS, 42);
rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff);
rt2x00pci_register_read(rt2x00dev, MAC_CSR9, &reg);
rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg);
rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x0000071c);
if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
return -EBUSY;
rt2x00pci_register_write(rt2x00dev, MAC_CSR13, 0x0000e000);
/*
* Invalidate all Shared Keys (SEC_CSR0),
* and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
*/
rt2x00pci_register_write(rt2x00dev, SEC_CSR0, 0x00000000);
rt2x00pci_register_write(rt2x00dev, SEC_CSR1, 0x00000000);
rt2x00pci_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
rt2x00pci_register_write(rt2x00dev, PHY_CSR1, 0x000023b0);
rt2x00pci_register_write(rt2x00dev, PHY_CSR5, 0x060a100c);
rt2x00pci_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
rt2x00pci_register_write(rt2x00dev, PHY_CSR7, 0x00000a08);
rt2x00pci_register_write(rt2x00dev, PCI_CFG_CSR, 0x28ca4404);
rt2x00pci_register_write(rt2x00dev, TEST_MODE_CSR, 0x00000200);
rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);
rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC0_TX_OP, 0);
rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC1_TX_OP, 0);
rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC2_TX_OP, 192);
rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC3_TX_OP, 48);
rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
/*
* We must clear the error counters.
* These registers are cleared on read,
* so we may pass a useless variable to store the value.
*/
rt2x00pci_register_read(rt2x00dev, STA_CSR0, &reg);
rt2x00pci_register_read(rt2x00dev, STA_CSR1, &reg);
rt2x00pci_register_read(rt2x00dev, STA_CSR2, &reg);
/*
* Reset MAC and BBP registers.
*/
rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
return 0;
}
static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev)
{
unsigned int i;
u16 eeprom;
u8 reg_id;
u8 value;
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt61pci_bbp_read(rt2x00dev, 0, &value);
if ((value != 0xff) && (value != 0x00))
goto continue_csr_init;
NOTICE(rt2x00dev, "Waiting for BBP register.\n");
udelay(REGISTER_BUSY_DELAY);
}
ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
return -EACCES;
continue_csr_init:
rt61pci_bbp_write(rt2x00dev, 3, 0x00);
rt61pci_bbp_write(rt2x00dev, 15, 0x30);
rt61pci_bbp_write(rt2x00dev, 21, 0xc8);
rt61pci_bbp_write(rt2x00dev, 22, 0x38);
rt61pci_bbp_write(rt2x00dev, 23, 0x06);
rt61pci_bbp_write(rt2x00dev, 24, 0xfe);
rt61pci_bbp_write(rt2x00dev, 25, 0x0a);
rt61pci_bbp_write(rt2x00dev, 26, 0x0d);
rt61pci_bbp_write(rt2x00dev, 34, 0x12);
rt61pci_bbp_write(rt2x00dev, 37, 0x07);
rt61pci_bbp_write(rt2x00dev, 39, 0xf8);
rt61pci_bbp_write(rt2x00dev, 41, 0x60);
rt61pci_bbp_write(rt2x00dev, 53, 0x10);
rt61pci_bbp_write(rt2x00dev, 54, 0x18);
rt61pci_bbp_write(rt2x00dev, 60, 0x10);
rt61pci_bbp_write(rt2x00dev, 61, 0x04);
rt61pci_bbp_write(rt2x00dev, 62, 0x04);
rt61pci_bbp_write(rt2x00dev, 75, 0xfe);
rt61pci_bbp_write(rt2x00dev, 86, 0xfe);
rt61pci_bbp_write(rt2x00dev, 88, 0xfe);
rt61pci_bbp_write(rt2x00dev, 90, 0x0f);
rt61pci_bbp_write(rt2x00dev, 99, 0x00);
rt61pci_bbp_write(rt2x00dev, 102, 0x16);
rt61pci_bbp_write(rt2x00dev, 107, 0x04);
DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
for (i = 0; i < EEPROM_BBP_SIZE; i++) {
rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
if (eeprom != 0xffff && eeprom != 0x0000) {
reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
reg_id, value);
rt61pci_bbp_write(rt2x00dev, reg_id, value);
}
}
DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
return 0;
}
/*
* Device state switch handlers.
*/
static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
u32 reg;
rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
state == STATE_RADIO_RX_OFF);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
}
static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
int mask = (state == STATE_RADIO_IRQ_OFF);
u32 reg;
/*
* When interrupts are being enabled, the interrupt registers
* should clear the register to assure a clean state.
*/
if (state == STATE_RADIO_IRQ_ON) {
rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, &reg);
rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg);
}
/*
* Only toggle the interrupts bits we are going to use.
* Non-checked interrupt bits are disabled by default.
*/
rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, &reg);
rt2x00_set_field32(&reg, INT_MASK_CSR_TXDONE, mask);
rt2x00_set_field32(&reg, INT_MASK_CSR_RXDONE, mask);
rt2x00_set_field32(&reg, INT_MASK_CSR_ENABLE_MITIGATION, mask);
rt2x00_set_field32(&reg, INT_MASK_CSR_MITIGATION_PERIOD, 0xff);
rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
rt2x00pci_register_read(rt2x00dev, MCU_INT_MASK_CSR, &reg);
rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_0, mask);
rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_1, mask);
rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_2, mask);
rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_3, mask);
rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_4, mask);
rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_5, mask);
rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_6, mask);
rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_7, mask);
rt2x00pci_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg);
}
static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
/*
* Initialize all registers.
*/
if (rt61pci_init_rings(rt2x00dev) ||
rt61pci_init_registers(rt2x00dev) ||
rt61pci_init_bbp(rt2x00dev)) {
ERROR(rt2x00dev, "Register initialization failed.\n");
return -EIO;
}
/*
* Enable interrupts.
*/
rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON);
/*
* Enable RX.
*/
rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, &reg);
rt2x00_set_field32(&reg, RX_CNTL_CSR_ENABLE_RX_DMA, 1);
rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg);
/*
* Enable LED
*/
rt61pci_enable_led(rt2x00dev);
return 0;
}
static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
/*
* Disable LED
*/
rt61pci_disable_led(rt2x00dev);
rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
/*
* Disable synchronisation.
*/
rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0);
/*
* Cancel RX and TX.
*/
rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC0, 1);
rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC1, 1);
rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC2, 1);
rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC3, 1);
rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_MGMT, 1);
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
/*
* Disable interrupts.
*/
rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF);
}
static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
{
u32 reg;
unsigned int i;
char put_to_sleep;
char current_state;
put_to_sleep = (state != STATE_AWAKE);
rt2x00pci_register_read(rt2x00dev, MAC_CSR12, &reg);
rt2x00_set_field32(&reg, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep);
rt2x00_set_field32(&reg, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep);
rt2x00pci_register_write(rt2x00dev, MAC_CSR12, reg);
/*
* Device is not guaranteed to be in the requested state yet.
* We must wait until the register indicates that the
* device has entered the correct state.
*/
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt2x00pci_register_read(rt2x00dev, MAC_CSR12, &reg);
current_state =
rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
if (current_state == !put_to_sleep)
return 0;
msleep(10);
}
NOTICE(rt2x00dev, "Device failed to enter state %d, "
"current device state %d.\n", !put_to_sleep, current_state);
return -EBUSY;
}
static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
int retval = 0;
switch (state) {
case STATE_RADIO_ON:
retval = rt61pci_enable_radio(rt2x00dev);
break;
case STATE_RADIO_OFF:
rt61pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
case STATE_RADIO_RX_OFF:
rt61pci_toggle_rx(rt2x00dev, state);
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
case STATE_STANDBY:
case STATE_AWAKE:
retval = rt61pci_set_state(rt2x00dev, state);
break;
default:
retval = -ENOTSUPP;
break;
}
return retval;
}
/*
* TX descriptor initialization
*/
static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
__le32 *txd,
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
struct txdata_entry_desc *desc,
struct ieee80211_hdr *ieee80211hdr,
unsigned int length,
struct ieee80211_tx_control *control)
{
u32 word;
/*
* Start writing the descriptor words.
*/
rt2x00_desc_read(txd, 1, &word);
rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue);
rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs);
rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min);
rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max);
rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
rt2x00_desc_write(txd, 1, word);
rt2x00_desc_read(txd, 2, &word);
rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal);
rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service);
rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low);
rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high);
rt2x00_desc_write(txd, 2, word);
rt2x00_desc_read(txd, 5, &word);
rt2x00_set_field32(&word, TXD_W5_TX_POWER,
TXPOWER_TO_DEV(control->power_level));
rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
rt2x00_desc_write(txd, 5, word);
rt2x00_desc_read(txd, 11, &word);
rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, length);
rt2x00_desc_write(txd, 11, word);
rt2x00_desc_read(txd, 0, &word);
rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
rt2x00_set_field32(&word, TXD_W0_VALID, 1);
rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
rt2x00_set_field32(&word, TXD_W0_ACK,
test_bit(ENTRY_TXD_ACK, &desc->flags));
rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
rt2x00_set_field32(&word, TXD_W0_OFDM,
test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags));
rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
!!(control->flags &
IEEE80211_TXCTL_LONG_RETRY_LIMIT));
rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length);
rt2x00_set_field32(&word, TXD_W0_BURST,
test_bit(ENTRY_TXD_BURST, &desc->flags));
rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
rt2x00_desc_write(txd, 0, word);
}
/*
* TX data initialization
*/
static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
unsigned int queue)
{
u32 reg;
if (queue == IEEE80211_TX_QUEUE_BEACON) {
/*
* For Wi-Fi faily generated beacons between participating
* stations. Set TBTT phase adaptive adjustment step to 8us.
*/
rt2x00pci_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
}
return;
}
rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC0,
(queue == IEEE80211_TX_QUEUE_DATA0));
rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC1,
(queue == IEEE80211_TX_QUEUE_DATA1));
rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC2,
(queue == IEEE80211_TX_QUEUE_DATA2));
rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC3,
(queue == IEEE80211_TX_QUEUE_DATA3));
rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_MGMT,
(queue == IEEE80211_TX_QUEUE_DATA4));
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
}
/*
* RX control handlers
*/
static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
{
u16 eeprom;
u8 offset;
u8 lna;
lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
switch (lna) {
case 3:
offset = 90;
break;
case 2:
offset = 74;
break;
case 1:
offset = 64;
break;
default:
return 0;
}
if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
offset += 14;
if (lna == 3 || lna == 2)
offset += 10;
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
} else {
if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
offset += 14;
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
}
return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
static void rt61pci_fill_rxdone(struct data_entry *entry,
struct rxdata_entry_desc *desc)
{
__le32 *rxd = entry->priv;
u32 word0;
u32 word1;
rt2x00_desc_read(rxd, 0, &word0);
rt2x00_desc_read(rxd, 1, &word1);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
desc->flags = 0;
if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
desc->flags |= RX_FLAG_FAILED_FCS_CRC;
/*
* Obtain the status about this packet.
*/
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
desc->rssi = rt61pci_agc_to_rssi(entry->ring->rt2x00dev, word1);
desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
return;
}
/*
* Interrupt functions.
*/
static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
{
struct data_ring *ring;
struct data_entry *entry;
struct data_entry *entry_done;
__le32 *txd;
u32 word;
u32 reg;
u32 old_reg;
int type;
int index;
int tx_status;
int retry;
/*
* During each loop we will compare the freshly read
* STA_CSR4 register value with the value read from
* the previous loop. If the 2 values are equal then
* we should stop processing because the chance it
* quite big that the device has been unplugged and
* we risk going into an endless loop.
*/
old_reg = 0;
while (1) {
rt2x00pci_register_read(rt2x00dev, STA_CSR4, &reg);
if (!rt2x00_get_field32(reg, STA_CSR4_VALID))
break;
if (old_reg == reg)
break;
old_reg = reg;
/*
* Skip this entry when it contains an invalid
* ring identication number.
*/
type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE);
ring = rt2x00lib_get_ring(rt2x00dev, type);
if (unlikely(!ring))
continue;
/*
* Skip this entry when it contains an invalid
* index number.
*/
index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE);
if (unlikely(index >= ring->stats.limit))
continue;
entry = &ring->entry[index];
txd = entry->priv;
rt2x00_desc_read(txd, 0, &word);
if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
!rt2x00_get_field32(word, TXD_W0_VALID))
return;
entry_done = rt2x00_get_data_entry_done(ring);
while (entry != entry_done) {
/* Catch up. Just report any entries we missed as
* failed. */
WARNING(rt2x00dev,
"TX status report missed for entry %p\n",
entry_done);
rt2x00lib_txdone(entry_done, TX_FAIL_OTHER, 0);
entry_done = rt2x00_get_data_entry_done(ring);
}
/*
* Obtain the status about this packet.
*/
tx_status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT);
retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);
rt2x00pci_txdone(rt2x00dev, entry, tx_status, retry);
}
}
static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
u32 reg_mcu;
u32 reg;
/*
* Get the interrupt sources & saved to local variable.
* Write register value back to clear pending interrupts.
*/
rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, &reg_mcu);
rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu);
rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
if (!reg && !reg_mcu)
return IRQ_NONE;
if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
return IRQ_HANDLED;
/*
* Handle interrupts, walk through all bits
* and run the tasks, the bits are checked in order of
* priority.
*/
/*
* 1 - Rx ring done interrupt.
*/
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RXDONE))
rt2x00pci_rxdone(rt2x00dev);
/*
* 2 - Tx ring done interrupt.
*/
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TXDONE))
rt61pci_txdone(rt2x00dev);
/*
* 3 - Handle MCU command done.
*/
if (reg_mcu)
rt2x00pci_register_write(rt2x00dev,
M2H_CMD_DONE_CSR, 0xffffffff);
return IRQ_HANDLED;
}
/*
* Device probe functions.
*/
static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
{
struct eeprom_93cx6 eeprom;
u32 reg;
u16 word;
u8 *mac;
s8 value;
rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
eeprom.data = rt2x00dev;
eeprom.register_read = rt61pci_eepromregister_read;
eeprom.register_write = rt61pci_eepromregister_write;
eeprom.width = rt2x00_get_field32(reg, E2PROM_CSR_TYPE_93C46) ?
PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
eeprom.reg_data_in = 0;
eeprom.reg_data_out = 0;
eeprom.reg_data_clock = 0;
eeprom.reg_chip_select = 0;
eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
EEPROM_SIZE / sizeof(u16));
/*
* Start validation of the data that has been read.
*/
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
if (!is_valid_ether_addr(mac)) {
DECLARE_MAC_BUF(macbuf);
random_ether_addr(mac);
EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
if (word == 0xffff) {
rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
ANTENNA_B);
rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
ANTENNA_B);
rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5225);
rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
if (word == 0xffff) {
rt2x00_set_field16(&word, EEPROM_NIC_ENABLE_DIVERSITY, 0);
rt2x00_set_field16(&word, EEPROM_NIC_TX_DIVERSITY, 0);
rt2x00_set_field16(&word, EEPROM_NIC_TX_RX_FIXED, 0);
rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word);
if (word == 0xffff) {
rt2x00_set_field16(&word, EEPROM_LED_LED_MODE,
LED_MODE_DEFAULT);
rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word);
EEPROM(rt2x00dev, "Led: 0x%04x\n", word);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
if (word == 0xffff) {
rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0);
rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word);
if (word == 0xffff) {
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
} else {
value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
if (value < -10 || value > 10)
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
if (value < -10 || value > 10)
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word);
if (word == 0xffff) {
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
} else {
value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
if (value < -10 || value > 10)
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
if (value < -10 || value > 10)
rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
}
return 0;
}
static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
u16 value;
u16 eeprom;
u16 device;
/*
* Read EEPROM word for configuration.
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
/*
* Identify RF chipset.
* To determine the RT chip we have to read the
* PCI header of the device.
*/
pci_read_config_word(rt2x00dev_pci(rt2x00dev),
PCI_CONFIG_HEADER_DEVICE, &device);
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
rt2x00_set_chip(rt2x00dev, device, value, reg);
if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
!rt2x00_rf(&rt2x00dev->chip, RF5325) &&
!rt2x00_rf(&rt2x00dev->chip, RF2527) &&
!rt2x00_rf(&rt2x00dev->chip, RF2529)) {
ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
return -ENODEV;
}
/*
* Determine number of antenna's.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2)
__set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags);
/*
* Identify default antenna configuration.
*/
rt2x00dev->default_ant.tx =
rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
rt2x00dev->default_ant.rx =
rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
/*
* Read the Frame type.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
__set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
/*
* Detect if this device has an hardware controlled radio.
*/
#ifdef CONFIG_RT61PCI_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
#endif /* CONFIG_RT61PCI_RFKILL */
/*
* Read frequency offset and RF programming sequence.
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
if (rt2x00_get_field16(eeprom, EEPROM_FREQ_SEQ))
__set_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags);
rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
/*
* Read external LNA informations.
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
__set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
__set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
/*
* When working with a RF2529 chip without double antenna
* the antenna settings should be gathered from the NIC
* eeprom word.
*/
if (rt2x00_rf(&rt2x00dev->chip, RF2529) &&
!test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) {
switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) {
case 0:
rt2x00dev->default_ant.tx = ANTENNA_B;
rt2x00dev->default_ant.rx = ANTENNA_A;
break;
case 1:
rt2x00dev->default_ant.tx = ANTENNA_B;
rt2x00dev->default_ant.rx = ANTENNA_B;
break;
case 2:
rt2x00dev->default_ant.tx = ANTENNA_A;
rt2x00dev->default_ant.rx = ANTENNA_A;
break;
case 3:
rt2x00dev->default_ant.tx = ANTENNA_A;
rt2x00dev->default_ant.rx = ANTENNA_B;
break;
}
if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY))
rt2x00dev->default_ant.tx = ANTENNA_SW_DIVERSITY;
if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY))
rt2x00dev->default_ant.rx = ANTENNA_SW_DIVERSITY;
}
/*
* Store led settings, for correct led behaviour.
* If the eeprom value is invalid,
* switch to default led mode.
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
rt2x00dev->led_mode = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE,
rt2x00dev->led_mode);
rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_0));
rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_1));
rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_2));
rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_3));
rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_4));
rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT,
rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_RDY_G));
rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_RDY_A));
return 0;
}
/*
* RF value list for RF5225 & RF5325
* Supports: 2.4 GHz & 5.2 GHz, rf_sequence disabled
*/
static const struct rf_channel rf_vals_noseq[] = {
{ 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
{ 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
{ 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
{ 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
{ 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
{ 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
{ 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
{ 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
{ 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
{ 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
{ 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
{ 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
{ 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
{ 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
/* 802.11 UNI / HyperLan 2 */
{ 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
{ 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
{ 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
{ 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
{ 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
{ 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
{ 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
{ 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },
/* 802.11 HyperLan 2 */
{ 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
{ 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
{ 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
{ 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
{ 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
{ 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
{ 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
{ 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
{ 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
{ 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },
/* 802.11 UNII */
{ 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
{ 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
{ 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
{ 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
{ 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
{ 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },
/* MMAC(Japan)J52 ch 34,38,42,46 */
{ 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
{ 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
{ 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
{ 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
};
/*
* RF value list for RF5225 & RF5325
* Supports: 2.4 GHz & 5.2 GHz, rf_sequence enabled
*/
static const struct rf_channel rf_vals_seq[] = {
{ 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
{ 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
{ 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
{ 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
{ 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
{ 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
{ 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
{ 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
{ 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
{ 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
{ 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
{ 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
{ 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
{ 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
/* 802.11 UNI / HyperLan 2 */
{ 36, 0x00002cd4, 0x0004481a, 0x00098455, 0x000c0a03 },
{ 40, 0x00002cd0, 0x00044682, 0x00098455, 0x000c0a03 },
{ 44, 0x00002cd0, 0x00044686, 0x00098455, 0x000c0a1b },
{ 48, 0x00002cd0, 0x0004468e, 0x00098655, 0x000c0a0b },
{ 52, 0x00002cd0, 0x00044692, 0x00098855, 0x000c0a23 },
{ 56, 0x00002cd0, 0x0004469a, 0x00098c55, 0x000c0a13 },
{ 60, 0x00002cd0, 0x000446a2, 0x00098e55, 0x000c0a03 },
{ 64, 0x00002cd0, 0x000446a6, 0x00099255, 0x000c0a1b },
/* 802.11 HyperLan 2 */
{ 100, 0x00002cd4, 0x0004489a, 0x000b9855, 0x000c0a03 },
{ 104, 0x00002cd4, 0x000448a2, 0x000b9855, 0x000c0a03 },
{ 108, 0x00002cd4, 0x000448aa, 0x000b9855, 0x000c0a03 },
{ 112, 0x00002cd4, 0x000448b2, 0x000b9a55, 0x000c0a03 },
{ 116, 0x00002cd4, 0x000448ba, 0x000b9a55, 0x000c0a03 },
{ 120, 0x00002cd0, 0x00044702, 0x000b9a55, 0x000c0a03 },
{ 124, 0x00002cd0, 0x00044706, 0x000b9a55, 0x000c0a1b },
{ 128, 0x00002cd0, 0x0004470e, 0x000b9c55, 0x000c0a0b },
{ 132, 0x00002cd0, 0x00044712, 0x000b9c55, 0x000c0a23 },
{ 136, 0x00002cd0, 0x0004471a, 0x000b9e55, 0x000c0a13 },
/* 802.11 UNII */
{ 140, 0x00002cd0, 0x00044722, 0x000b9e55, 0x000c0a03 },
{ 149, 0x00002cd0, 0x0004472e, 0x000ba255, 0x000c0a1b },
{ 153, 0x00002cd0, 0x00044736, 0x000ba255, 0x000c0a0b },
{ 157, 0x00002cd4, 0x0004490a, 0x000ba255, 0x000c0a17 },
{ 161, 0x00002cd4, 0x00044912, 0x000ba255, 0x000c0a17 },
{ 165, 0x00002cd4, 0x0004491a, 0x000ba255, 0x000c0a17 },
/* MMAC(Japan)J52 ch 34,38,42,46 */
{ 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000c0a0b },
{ 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000c0a13 },
{ 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000c0a1b },
{ 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 },
};
static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
u8 *txpower;
unsigned int i;
/*
* Initialize all hw fields.
*/
rt2x00dev->hw->flags =
IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
rt2x00dev->hw->extra_tx_headroom = 0;
rt2x00dev->hw->max_signal = MAX_SIGNAL;
rt2x00dev->hw->max_rssi = MAX_RX_SSI;
rt2x00dev->hw->queues = 5;
SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
/*
* Convert tx_power array in eeprom.
*/
txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
for (i = 0; i < 14; i++)
txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
/*
* Initialize hw_mode information.
*/
spec->num_modes = 2;
spec->num_rates = 12;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) {
spec->num_channels = 14;
spec->channels = rf_vals_noseq;
} else {
spec->num_channels = 14;
spec->channels = rf_vals_seq;
}
if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
rt2x00_rf(&rt2x00dev->chip, RF5325)) {
spec->num_modes = 3;
spec->num_channels = ARRAY_SIZE(rf_vals_seq);
txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
for (i = 0; i < 14; i++)
txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
spec->tx_power_a = txpower;
}
}
static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
/*
* Allocate eeprom data.
*/
retval = rt61pci_validate_eeprom(rt2x00dev);
if (retval)
return retval;
retval = rt61pci_init_eeprom(rt2x00dev);
if (retval)
return retval;
/*
* Initialize hw specifications.
*/
rt61pci_probe_hw_mode(rt2x00dev);
/*
* This device requires firmware
*/
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
/*
* Set the rssi offset.
*/
rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
return 0;
}
/*
* IEEE80211 stack callback functions.
*/
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
static void rt61pci_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
int mc_count,
struct dev_addr_list *mc_list)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct interface *intf = &rt2x00dev->interface;
u32 reg;
/*
* Mask off any flags we are going to ignore from
* the total_flags field.
*/
*total_flags &=
FIF_ALLMULTI |
FIF_FCSFAIL |
FIF_PLCPFAIL |
FIF_CONTROL |
FIF_OTHER_BSS |
FIF_PROMISC_IN_BSS;
/*
* Apply some rules to the filters:
* - Some filters imply different filters to be set.
* - Some things we can't filter out at all.
* - Some filters are set based on interface type.
*/
if (mc_count)
*total_flags |= FIF_ALLMULTI;
if (*total_flags & FIF_OTHER_BSS ||
*total_flags & FIF_PROMISC_IN_BSS)
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
*total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
if (is_interface_type(intf, IEEE80211_IF_TYPE_AP))
*total_flags |= FIF_PROMISC_IN_BSS;
/*
* Check if there is any work left for us.
*/
if (intf->filter == *total_flags)
return;
intf->filter = *total_flags;
/*
* Start configuration steps.
* Note that the version error will always be dropped
* and broadcast frames will always be accepted since
* there is no filter for it at this time.
*/
rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC,
!(*total_flags & FIF_FCSFAIL));
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL,
!(*total_flags & FIF_PLCPFAIL));
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
!(*total_flags & FIF_CONTROL));
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
!(*total_flags & FIF_PROMISC_IN_BSS));
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
!(*total_flags & FIF_PROMISC_IN_BSS));
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
!(*total_flags & FIF_ALLMULTI));
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BORADCAST, 0);
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS, 1);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
}
static int rt61pci_set_retry_limit(struct ieee80211_hw *hw,
u32 short_retry, u32 long_retry)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
u32 reg;
rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry);
rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
return 0;
}
static u64 rt61pci_get_tsf(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
u64 tsf;
u32 reg;
rt2x00pci_register_read(rt2x00dev, TXRX_CSR13, &reg);
tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
rt2x00pci_register_read(rt2x00dev, TXRX_CSR12, &reg);
tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
return tsf;
}
static void rt61pci_reset_tsf(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
rt2x00pci_register_write(rt2x00dev, TXRX_CSR12, 0);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR13, 0);
}
static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct skb_desc *desc;
struct data_ring *ring;
struct data_entry *entry;
/*
* Just in case the ieee80211 doesn't set this,
* but we need this queue set for the descriptor
* initialization.
*/
control->queue = IEEE80211_TX_QUEUE_BEACON;
ring = rt2x00lib_get_ring(rt2x00dev, control->queue);
entry = rt2x00_get_data_entry(ring);
/*
* We need to append the descriptor in front of the
* beacon frame.
*/
if (skb_headroom(skb) < TXD_DESC_SIZE) {
if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC)) {
dev_kfree_skb(skb);
return -ENOMEM;
}
}
/*
* Add the descriptor in front of the skb.
*/
skb_push(skb, ring->desc_size);
memset(skb->data, 0, ring->desc_size);
/*
* Fill in skb descriptor
*/
desc = get_skb_desc(skb);
desc->desc_len = ring->desc_size;
desc->data_len = skb->len - ring->desc_size;
desc->desc = skb->data;
desc->data = skb->data + ring->desc_size;
desc->ring = ring;
desc->entry = entry;
rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
/*
* Write entire beacon with descriptor to register,
* and kick the beacon generator.
*/
rt2x00pci_register_multiwrite(rt2x00dev, HW_BEACON_BASE0,
skb->data, skb->len);
rt61pci_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
return 0;
}
static const struct ieee80211_ops rt61pci_mac80211_ops = {
.tx = rt2x00mac_tx,
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
.start = rt2x00mac_start,
.stop = rt2x00mac_stop,
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.config_interface = rt2x00mac_config_interface,
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
.configure_filter = rt61pci_configure_filter,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt61pci_set_retry_limit,
.erp_ie_changed = rt2x00mac_erp_ie_changed,
.conf_tx = rt2x00mac_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt61pci_get_tsf,
.reset_tsf = rt61pci_reset_tsf,
.beacon_update = rt61pci_beacon_update,
};
static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
.irq_handler = rt61pci_interrupt,
.probe_hw = rt61pci_probe_hw,
.get_firmware_name = rt61pci_get_firmware_name,
.load_firmware = rt61pci_load_firmware,
.initialize = rt2x00pci_initialize,
.uninitialize = rt2x00pci_uninitialize,
.set_device_state = rt61pci_set_device_state,
.rfkill_poll = rt61pci_rfkill_poll,
.link_stats = rt61pci_link_stats,
.reset_tuner = rt61pci_reset_tuner,
.link_tuner = rt61pci_link_tuner,
.write_tx_desc = rt61pci_write_tx_desc,
.write_tx_data = rt2x00pci_write_tx_data,
.kick_tx_queue = rt61pci_kick_tx_queue,
.fill_rxdone = rt61pci_fill_rxdone,
.config_mac_addr = rt61pci_config_mac_addr,
.config_bssid = rt61pci_config_bssid,
.config_type = rt61pci_config_type,
.config_preamble = rt61pci_config_preamble,
.config = rt61pci_config,
};
static const struct rt2x00_ops rt61pci_ops = {
.name = KBUILD_MODNAME,
.rxd_size = RXD_DESC_SIZE,
.txd_size = TXD_DESC_SIZE,
.eeprom_size = EEPROM_SIZE,
.rf_size = RF_SIZE,
.lib = &rt61pci_rt2x00_ops,
.hw = &rt61pci_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
.debugfs = &rt61pci_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};
/*
* RT61pci module information.
*/
static struct pci_device_id rt61pci_device_table[] = {
/* RT2561s */
{ PCI_DEVICE(0x1814, 0x0301), PCI_DEVICE_DATA(&rt61pci_ops) },
/* RT2561 v2 */
{ PCI_DEVICE(0x1814, 0x0302), PCI_DEVICE_DATA(&rt61pci_ops) },
/* RT2661 */
{ PCI_DEVICE(0x1814, 0x0401), PCI_DEVICE_DATA(&rt61pci_ops) },
{ 0, }
};
MODULE_AUTHOR(DRV_PROJECT);
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("Ralink RT61 PCI & PCMCIA Wireless LAN driver.");
MODULE_SUPPORTED_DEVICE("Ralink RT2561, RT2561s & RT2661 "
"PCI & PCMCIA chipset based cards");
MODULE_DEVICE_TABLE(pci, rt61pci_device_table);
MODULE_FIRMWARE(FIRMWARE_RT2561);
MODULE_FIRMWARE(FIRMWARE_RT2561s);
MODULE_FIRMWARE(FIRMWARE_RT2661);
MODULE_LICENSE("GPL");
static struct pci_driver rt61pci_driver = {
.name = KBUILD_MODNAME,
.id_table = rt61pci_device_table,
.probe = rt2x00pci_probe,
.remove = __devexit_p(rt2x00pci_remove),
.suspend = rt2x00pci_suspend,
.resume = rt2x00pci_resume,
};
static int __init rt61pci_init(void)
{
return pci_register_driver(&rt61pci_driver);
}
static void __exit rt61pci_exit(void)
{
pci_unregister_driver(&rt61pci_driver);
}
module_init(rt61pci_init);
module_exit(rt61pci_exit);