linux/drivers/misc/kgdbts.c

1114 lines
28 KiB
C
Raw Normal View History

kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
/*
* kgdbts is a test suite for kgdb for the sole purpose of validating
* that key pieces of the kgdb internals are working properly such as
* HW/SW breakpoints, single stepping, and NMI.
*
* Created by: Jason Wessel <jason.wessel@windriver.com>
*
* Copyright (c) 2008 Wind River Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* Information about the kgdb test suite.
* -------------------------------------
*
* The kgdb test suite is designed as a KGDB I/O module which
* simulates the communications that a debugger would have with kgdb.
* The tests are broken up in to a line by line and referenced here as
* a "get" which is kgdb requesting input and "put" which is kgdb
* sending a response.
*
* The kgdb suite can be invoked from the kernel command line
* arguments system or executed dynamically at run time. The test
* suite uses the variable "kgdbts" to obtain the information about
* which tests to run and to configure the verbosity level. The
* following are the various characters you can use with the kgdbts=
* line:
*
* When using the "kgdbts=" you only choose one of the following core
* test types:
* A = Run all the core tests silently
* V1 = Run all the core tests with minimal output
* V2 = Run all the core tests in debug mode
*
* You can also specify optional tests:
* N## = Go to sleep with interrupts of for ## seconds
* to test the HW NMI watchdog
* F## = Break at do_fork for ## iterations
* S## = Break at sys_open for ## iterations
* I## = Run the single step test ## iterations
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
*
* NOTE: that the do_fork and sys_open tests are mutually exclusive.
*
* To invoke the kgdb test suite from boot you use a kernel start
* argument as follows:
* kgdbts=V1 kgdbwait
* Or if you wanted to perform the NMI test for 6 seconds and do_fork
* test for 100 forks, you could use:
* kgdbts=V1N6F100 kgdbwait
*
* The test suite can also be invoked at run time with:
* echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts
* Or as another example:
* echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts
*
* When developing a new kgdb arch specific implementation or
* using these tests for the purpose of regression testing,
* several invocations are required.
*
* 1) Boot with the test suite enabled by using the kernel arguments
* "kgdbts=V1F100 kgdbwait"
* ## If kgdb arch specific implementation has NMI use
* "kgdbts=V1N6F100
*
* 2) After the system boot run the basic test.
* echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts
*
* 3) Run the concurrency tests. It is best to use n+1
* while loops where n is the number of cpus you have
* in your system. The example below uses only two
* loops.
*
* ## This tests break points on sys_open
* while [ 1 ] ; do find / > /dev/null 2>&1 ; done &
* while [ 1 ] ; do find / > /dev/null 2>&1 ; done &
* echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts
* fg # and hit control-c
* fg # and hit control-c
* ## This tests break points on do_fork
* while [ 1 ] ; do date > /dev/null ; done &
* while [ 1 ] ; do date > /dev/null ; done &
* echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts
* fg # and hit control-c
*
*/
#include <linux/kernel.h>
#include <linux/kgdb.h>
#include <linux/ctype.h>
#include <linux/uaccess.h>
#include <linux/syscalls.h>
#include <linux/nmi.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#define v1printk(a...) do { \
if (verbose) \
printk(KERN_INFO a); \
} while (0)
#define v2printk(a...) do { \
if (verbose > 1) \
printk(KERN_INFO a); \
touch_nmi_watchdog(); \
} while (0)
#define eprintk(a...) do { \
printk(KERN_ERR a); \
WARN_ON(1); \
} while (0)
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
#define MAX_CONFIG_LEN 40
static struct kgdb_io kgdbts_io_ops;
static char get_buf[BUFMAX];
static int get_buf_cnt;
static char put_buf[BUFMAX];
static int put_buf_cnt;
static char scratch_buf[BUFMAX];
static int verbose;
static int repeat_test;
static int test_complete;
static int send_ack;
static int final_ack;
static int force_hwbrks;
static int hwbreaks_ok;
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
static int hw_break_val;
static int hw_break_val2;
#if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_SPARC)
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
static int arch_needs_sstep_emulation = 1;
#else
static int arch_needs_sstep_emulation;
#endif
static unsigned long sstep_addr;
static int sstep_state;
/* Storage for the registers, in GDB format. */
static unsigned long kgdbts_gdb_regs[(NUMREGBYTES +
sizeof(unsigned long) - 1) /
sizeof(unsigned long)];
static struct pt_regs kgdbts_regs;
/* -1 = init not run yet, 0 = unconfigured, 1 = configured. */
static int configured = -1;
#ifdef CONFIG_KGDB_TESTS_BOOT_STRING
static char config[MAX_CONFIG_LEN] = CONFIG_KGDB_TESTS_BOOT_STRING;
#else
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
static char config[MAX_CONFIG_LEN];
#endif
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
static struct kparam_string kps = {
.string = config,
.maxlen = MAX_CONFIG_LEN,
};
static void fill_get_buf(char *buf);
struct test_struct {
char *get;
char *put;
void (*get_handler)(char *);
int (*put_handler)(char *, char *);
};
struct test_state {
char *name;
struct test_struct *tst;
int idx;
int (*run_test) (int, int);
int (*validate_put) (char *);
};
static struct test_state ts;
static int kgdbts_unreg_thread(void *ptr)
{
/* Wait until the tests are complete and then ungresiter the I/O
* driver.
*/
while (!final_ack)
msleep_interruptible(1500);
if (configured)
kgdb_unregister_io_module(&kgdbts_io_ops);
configured = 0;
return 0;
}
/* This is noinline such that it can be used for a single location to
* place a breakpoint
*/
static noinline void kgdbts_break_test(void)
{
v2printk("kgdbts: breakpoint complete\n");
}
/* Lookup symbol info in the kernel */
static unsigned long lookup_addr(char *arg)
{
unsigned long addr = 0;
if (!strcmp(arg, "kgdbts_break_test"))
addr = (unsigned long)kgdbts_break_test;
else if (!strcmp(arg, "sys_open"))
addr = (unsigned long)sys_open;
else if (!strcmp(arg, "do_fork"))
addr = (unsigned long)do_fork;
else if (!strcmp(arg, "hw_break_val"))
addr = (unsigned long)&hw_break_val;
return addr;
}
static void break_helper(char *bp_type, char *arg, unsigned long vaddr)
{
unsigned long addr;
if (arg)
addr = lookup_addr(arg);
else
addr = vaddr;
sprintf(scratch_buf, "%s,%lx,%i", bp_type, addr,
BREAK_INSTR_SIZE);
fill_get_buf(scratch_buf);
}
static void sw_break(char *arg)
{
break_helper(force_hwbrks ? "Z1" : "Z0", arg, 0);
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
}
static void sw_rem_break(char *arg)
{
break_helper(force_hwbrks ? "z1" : "z0", arg, 0);
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
}
static void hw_break(char *arg)
{
break_helper("Z1", arg, 0);
}
static void hw_rem_break(char *arg)
{
break_helper("z1", arg, 0);
}
static void hw_write_break(char *arg)
{
break_helper("Z2", arg, 0);
}
static void hw_rem_write_break(char *arg)
{
break_helper("z2", arg, 0);
}
static void hw_access_break(char *arg)
{
break_helper("Z4", arg, 0);
}
static void hw_rem_access_break(char *arg)
{
break_helper("z4", arg, 0);
}
static void hw_break_val_access(void)
{
hw_break_val2 = hw_break_val;
}
static void hw_break_val_write(void)
{
hw_break_val++;
}
static int check_and_rewind_pc(char *put_str, char *arg)
{
unsigned long addr = lookup_addr(arg);
unsigned long ip;
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
int offset = 0;
kgdb_hex2mem(&put_str[1], (char *)kgdbts_gdb_regs,
NUMREGBYTES);
gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs);
ip = instruction_pointer(&kgdbts_regs);
v2printk("Stopped at IP: %lx\n", ip);
#ifdef GDB_ADJUSTS_BREAK_OFFSET
/* On some arches, a breakpoint stop requires it to be decremented */
if (addr + BREAK_INSTR_SIZE == ip)
offset = -BREAK_INSTR_SIZE;
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
#endif
if (strcmp(arg, "silent") && ip + offset != addr) {
eprintk("kgdbts: BP mismatch %lx expected %lx\n",
ip + offset, addr);
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
return 1;
}
/* Readjust the instruction pointer if needed */
instruction_pointer_set(&kgdbts_regs, ip + offset);
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
return 0;
}
static int check_single_step(char *put_str, char *arg)
{
unsigned long addr = lookup_addr(arg);
/*
* From an arch indepent point of view the instruction pointer
* should be on a different instruction
*/
kgdb_hex2mem(&put_str[1], (char *)kgdbts_gdb_regs,
NUMREGBYTES);
gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs);
v2printk("Singlestep stopped at IP: %lx\n",
instruction_pointer(&kgdbts_regs));
if (instruction_pointer(&kgdbts_regs) == addr) {
eprintk("kgdbts: SingleStep failed at %lx\n",
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
instruction_pointer(&kgdbts_regs));
return 1;
}
return 0;
}
static void write_regs(char *arg)
{
memset(scratch_buf, 0, sizeof(scratch_buf));
scratch_buf[0] = 'G';
pt_regs_to_gdb_regs(kgdbts_gdb_regs, &kgdbts_regs);
kgdb_mem2hex((char *)kgdbts_gdb_regs, &scratch_buf[1], NUMREGBYTES);
fill_get_buf(scratch_buf);
}
static void skip_back_repeat_test(char *arg)
{
int go_back = simple_strtol(arg, NULL, 10);
repeat_test--;
if (repeat_test <= 0)
ts.idx++;
else
ts.idx -= go_back;
fill_get_buf(ts.tst[ts.idx].get);
}
static int got_break(char *put_str, char *arg)
{
test_complete = 1;
if (!strncmp(put_str+1, arg, 2)) {
if (!strncmp(arg, "T0", 2))
test_complete = 2;
return 0;
}
return 1;
}
static void emul_sstep_get(char *arg)
{
if (!arch_needs_sstep_emulation) {
fill_get_buf(arg);
return;
}
switch (sstep_state) {
case 0:
v2printk("Emulate single step\n");
/* Start by looking at the current PC */
fill_get_buf("g");
break;
case 1:
/* set breakpoint */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
break_helper("Z0", NULL, sstep_addr);
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
break;
case 2:
/* Continue */
fill_get_buf("c");
break;
case 3:
/* Clear breakpoint */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
break_helper("z0", NULL, sstep_addr);
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
break;
default:
eprintk("kgdbts: ERROR failed sstep get emulation\n");
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
}
sstep_state++;
}
static int emul_sstep_put(char *put_str, char *arg)
{
if (!arch_needs_sstep_emulation) {
if (!strncmp(put_str+1, arg, 2))
return 0;
return 1;
}
switch (sstep_state) {
case 1:
/* validate the "g" packet to get the IP */
kgdb_hex2mem(&put_str[1], (char *)kgdbts_gdb_regs,
NUMREGBYTES);
gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs);
v2printk("Stopped at IP: %lx\n",
instruction_pointer(&kgdbts_regs));
/* Want to stop at IP + break instruction size by default */
sstep_addr = instruction_pointer(&kgdbts_regs) +
BREAK_INSTR_SIZE;
break;
case 2:
if (strncmp(put_str, "$OK", 3)) {
eprintk("kgdbts: failed sstep break set\n");
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
return 1;
}
break;
case 3:
if (strncmp(put_str, "$T0", 3)) {
eprintk("kgdbts: failed continue sstep\n");
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
return 1;
}
break;
case 4:
if (strncmp(put_str, "$OK", 3)) {
eprintk("kgdbts: failed sstep break unset\n");
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
return 1;
}
/* Single step is complete so continue on! */
sstep_state = 0;
return 0;
default:
eprintk("kgdbts: ERROR failed sstep put emulation\n");
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
}
/* Continue on the same test line until emulation is complete */
ts.idx--;
return 0;
}
static int final_ack_set(char *put_str, char *arg)
{
if (strncmp(put_str+1, arg, 2))
return 1;
final_ack = 1;
return 0;
}
/*
* Test to plant a breakpoint and detach, which should clear out the
* breakpoint and restore the original instruction.
*/
static struct test_struct plant_and_detach_test[] = {
{ "?", "S0*" }, /* Clear break points */
{ "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
{ "D", "OK" }, /* Detach */
{ "", "" },
};
/*
* Simple test to write in a software breakpoint, check for the
* correct stop location and detach.
*/
static struct test_struct sw_breakpoint_test[] = {
{ "?", "S0*" }, /* Clear break points */
{ "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
{ "c", "T0*", }, /* Continue */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "g", "kgdbts_break_test", NULL, check_and_rewind_pc },
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "write", "OK", write_regs },
{ "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */
{ "D", "OK" }, /* Detach */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "D", "OK", NULL, got_break }, /* On success we made it here */
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "", "" },
};
/*
* Test a known bad memory read location to test the fault handler and
* read bytes 1-8 at the bad address
*/
static struct test_struct bad_read_test[] = {
{ "?", "S0*" }, /* Clear break points */
{ "m0,1", "E*" }, /* read 1 byte at address 1 */
{ "m0,2", "E*" }, /* read 1 byte at address 2 */
{ "m0,3", "E*" }, /* read 1 byte at address 3 */
{ "m0,4", "E*" }, /* read 1 byte at address 4 */
{ "m0,5", "E*" }, /* read 1 byte at address 5 */
{ "m0,6", "E*" }, /* read 1 byte at address 6 */
{ "m0,7", "E*" }, /* read 1 byte at address 7 */
{ "m0,8", "E*" }, /* read 1 byte at address 8 */
{ "D", "OK" }, /* Detach which removes all breakpoints and continues */
{ "", "" },
};
/*
* Test for hitting a breakpoint, remove it, single step, plant it
* again and detach.
*/
static struct test_struct singlestep_break_test[] = {
{ "?", "S0*" }, /* Clear break points */
{ "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
{ "c", "T0*", }, /* Continue */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "g", "kgdbts_break_test", NULL, check_and_rewind_pc },
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "write", "OK", write_regs }, /* Write registers */
{ "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */
{ "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "g", "kgdbts_break_test", NULL, check_single_step },
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
{ "c", "T0*", }, /* Continue */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "g", "kgdbts_break_test", NULL, check_and_rewind_pc },
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "write", "OK", write_regs }, /* Write registers */
{ "D", "OK" }, /* Remove all breakpoints and continues */
{ "", "" },
};
/*
* Test for hitting a breakpoint at do_fork for what ever the number
* of iterations required by the variable repeat_test.
*/
static struct test_struct do_fork_test[] = {
{ "?", "S0*" }, /* Clear break points */
{ "do_fork", "OK", sw_break, }, /* set sw breakpoint */
{ "c", "T0*", }, /* Continue */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "g", "do_fork", NULL, check_and_rewind_pc }, /* check location */
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "write", "OK", write_regs }, /* Write registers */
{ "do_fork", "OK", sw_rem_break }, /*remove breakpoint */
{ "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "g", "do_fork", NULL, check_single_step },
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "do_fork", "OK", sw_break, }, /* set sw breakpoint */
{ "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "D", "OK", NULL, final_ack_set }, /* detach and unregister I/O */
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "", "" },
};
/* Test for hitting a breakpoint at sys_open for what ever the number
* of iterations required by the variable repeat_test.
*/
static struct test_struct sys_open_test[] = {
{ "?", "S0*" }, /* Clear break points */
{ "sys_open", "OK", sw_break, }, /* set sw breakpoint */
{ "c", "T0*", }, /* Continue */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "g", "sys_open", NULL, check_and_rewind_pc }, /* check location */
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "write", "OK", write_regs }, /* Write registers */
{ "sys_open", "OK", sw_rem_break }, /*remove breakpoint */
{ "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "g", "sys_open", NULL, check_single_step },
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "sys_open", "OK", sw_break, }, /* set sw breakpoint */
{ "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "D", "OK", NULL, final_ack_set }, /* detach and unregister I/O */
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "", "" },
};
/*
* Test for hitting a simple hw breakpoint
*/
static struct test_struct hw_breakpoint_test[] = {
{ "?", "S0*" }, /* Clear break points */
{ "kgdbts_break_test", "OK", hw_break, }, /* set hw breakpoint */
{ "c", "T0*", }, /* Continue */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "g", "kgdbts_break_test", NULL, check_and_rewind_pc },
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "write", "OK", write_regs },
{ "kgdbts_break_test", "OK", hw_rem_break }, /*remove breakpoint */
{ "D", "OK" }, /* Detach */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "D", "OK", NULL, got_break }, /* On success we made it here */
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "", "" },
};
/*
* Test for hitting a hw write breakpoint
*/
static struct test_struct hw_write_break_test[] = {
{ "?", "S0*" }, /* Clear break points */
{ "hw_break_val", "OK", hw_write_break, }, /* set hw breakpoint */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "c", "T0*", NULL, got_break }, /* Continue */
{ "g", "silent", NULL, check_and_rewind_pc },
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "write", "OK", write_regs },
{ "hw_break_val", "OK", hw_rem_write_break }, /*remove breakpoint */
{ "D", "OK" }, /* Detach */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "D", "OK", NULL, got_break }, /* On success we made it here */
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "", "" },
};
/*
* Test for hitting a hw access breakpoint
*/
static struct test_struct hw_access_break_test[] = {
{ "?", "S0*" }, /* Clear break points */
{ "hw_break_val", "OK", hw_access_break, }, /* set hw breakpoint */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "c", "T0*", NULL, got_break }, /* Continue */
{ "g", "silent", NULL, check_and_rewind_pc },
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "write", "OK", write_regs },
{ "hw_break_val", "OK", hw_rem_access_break }, /*remove breakpoint */
{ "D", "OK" }, /* Detach */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "D", "OK", NULL, got_break }, /* On success we made it here */
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "", "" },
};
/*
* Test for hitting a hw access breakpoint
*/
static struct test_struct nmi_sleep_test[] = {
{ "?", "S0*" }, /* Clear break points */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "c", "T0*", NULL, got_break }, /* Continue */
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "D", "OK" }, /* Detach */
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
{ "D", "OK", NULL, got_break }, /* On success we made it here */
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
{ "", "" },
};
static void fill_get_buf(char *buf)
{
unsigned char checksum = 0;
int count = 0;
char ch;
strcpy(get_buf, "$");
strcat(get_buf, buf);
while ((ch = buf[count])) {
checksum += ch;
count++;
}
strcat(get_buf, "#");
get_buf[count + 2] = hex_asc_hi(checksum);
get_buf[count + 3] = hex_asc_lo(checksum);
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
get_buf[count + 4] = '\0';
v2printk("get%i: %s\n", ts.idx, get_buf);
}
static int validate_simple_test(char *put_str)
{
char *chk_str;
if (ts.tst[ts.idx].put_handler)
return ts.tst[ts.idx].put_handler(put_str,
ts.tst[ts.idx].put);
chk_str = ts.tst[ts.idx].put;
if (*put_str == '$')
put_str++;
while (*chk_str != '\0' && *put_str != '\0') {
/* If someone does a * to match the rest of the string, allow
* it, or stop if the received string is complete.
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
*/
if (*put_str == '#' || *chk_str == '*')
return 0;
if (*put_str != *chk_str)
return 1;
chk_str++;
put_str++;
}
if (*chk_str == '\0' && (*put_str == '\0' || *put_str == '#'))
return 0;
return 1;
}
static int run_simple_test(int is_get_char, int chr)
{
int ret = 0;
if (is_get_char) {
/* Send an ACK on the get if a prior put completed and set the
* send ack variable
*/
if (send_ack) {
send_ack = 0;
return '+';
}
/* On the first get char, fill the transmit buffer and then
* take from the get_string.
*/
if (get_buf_cnt == 0) {
if (ts.tst[ts.idx].get_handler)
ts.tst[ts.idx].get_handler(ts.tst[ts.idx].get);
else
fill_get_buf(ts.tst[ts.idx].get);
}
if (get_buf[get_buf_cnt] == '\0') {
eprintk("kgdbts: ERROR GET: EOB on '%s' at %i\n",
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
ts.name, ts.idx);
get_buf_cnt = 0;
fill_get_buf("D");
}
ret = get_buf[get_buf_cnt];
get_buf_cnt++;
return ret;
}
/* This callback is a put char which is when kgdb sends data to
* this I/O module.
*/
if (ts.tst[ts.idx].get[0] == '\0' &&
ts.tst[ts.idx].put[0] == '\0') {
eprintk("kgdbts: ERROR: beyond end of test on"
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
" '%s' line %i\n", ts.name, ts.idx);
return 0;
}
if (put_buf_cnt >= BUFMAX) {
eprintk("kgdbts: ERROR: put buffer overflow on"
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
" '%s' line %i\n", ts.name, ts.idx);
put_buf_cnt = 0;
return 0;
}
/* Ignore everything until the first valid packet start '$' */
if (put_buf_cnt == 0 && chr != '$')
return 0;
put_buf[put_buf_cnt] = chr;
put_buf_cnt++;
/* End of packet == #XX so look for the '#' */
if (put_buf_cnt > 3 && put_buf[put_buf_cnt - 3] == '#') {
if (put_buf_cnt >= BUFMAX) {
eprintk("kgdbts: ERROR: put buffer overflow on"
" '%s' line %i\n", ts.name, ts.idx);
put_buf_cnt = 0;
return 0;
}
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
put_buf[put_buf_cnt] = '\0';
v2printk("put%i: %s\n", ts.idx, put_buf);
/* Trigger check here */
if (ts.validate_put && ts.validate_put(put_buf)) {
eprintk("kgdbts: ERROR PUT: end of test "
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
"buffer on '%s' line %i expected %s got %s\n",
ts.name, ts.idx, ts.tst[ts.idx].put, put_buf);
}
ts.idx++;
put_buf_cnt = 0;
get_buf_cnt = 0;
send_ack = 1;
}
return 0;
}
static void init_simple_test(void)
{
memset(&ts, 0, sizeof(ts));
ts.run_test = run_simple_test;
ts.validate_put = validate_simple_test;
}
static void run_plant_and_detach_test(int is_early)
{
char before[BREAK_INSTR_SIZE];
char after[BREAK_INSTR_SIZE];
probe_kernel_read(before, (char *)kgdbts_break_test,
BREAK_INSTR_SIZE);
init_simple_test();
ts.tst = plant_and_detach_test;
ts.name = "plant_and_detach_test";
/* Activate test with initial breakpoint */
if (!is_early)
kgdb_breakpoint();
probe_kernel_read(after, (char *)kgdbts_break_test,
BREAK_INSTR_SIZE);
if (memcmp(before, after, BREAK_INSTR_SIZE)) {
printk(KERN_CRIT "kgdbts: ERROR kgdb corrupted memory\n");
panic("kgdb memory corruption");
}
/* complete the detach test */
if (!is_early)
kgdbts_break_test();
}
static void run_breakpoint_test(int is_hw_breakpoint)
{
test_complete = 0;
init_simple_test();
if (is_hw_breakpoint) {
ts.tst = hw_breakpoint_test;
ts.name = "hw_breakpoint_test";
} else {
ts.tst = sw_breakpoint_test;
ts.name = "sw_breakpoint_test";
}
/* Activate test with initial breakpoint */
kgdb_breakpoint();
/* run code with the break point in it */
kgdbts_break_test();
kgdb_breakpoint();
if (test_complete)
return;
eprintk("kgdbts: ERROR %s test failed\n", ts.name);
if (is_hw_breakpoint)
hwbreaks_ok = 0;
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
}
static void run_hw_break_test(int is_write_test)
{
test_complete = 0;
init_simple_test();
if (is_write_test) {
ts.tst = hw_write_break_test;
ts.name = "hw_write_break_test";
} else {
ts.tst = hw_access_break_test;
ts.name = "hw_access_break_test";
}
/* Activate test with initial breakpoint */
kgdb_breakpoint();
hw_break_val_access();
if (is_write_test) {
if (test_complete == 2) {
eprintk("kgdbts: ERROR %s broke on access\n",
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
ts.name);
hwbreaks_ok = 0;
}
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
hw_break_val_write();
}
kgdb_breakpoint();
if (test_complete == 1)
return;
eprintk("kgdbts: ERROR %s test failed\n", ts.name);
hwbreaks_ok = 0;
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
}
static void run_nmi_sleep_test(int nmi_sleep)
{
unsigned long flags;
init_simple_test();
ts.tst = nmi_sleep_test;
ts.name = "nmi_sleep_test";
/* Activate test with initial breakpoint */
kgdb_breakpoint();
local_irq_save(flags);
mdelay(nmi_sleep*1000);
touch_nmi_watchdog();
local_irq_restore(flags);
if (test_complete != 2)
eprintk("kgdbts: ERROR nmi_test did not hit nmi\n");
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
kgdb_breakpoint();
if (test_complete == 1)
return;
eprintk("kgdbts: ERROR %s test failed\n", ts.name);
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
}
static void run_bad_read_test(void)
{
init_simple_test();
ts.tst = bad_read_test;
ts.name = "bad_read_test";
/* Activate test with initial breakpoint */
kgdb_breakpoint();
}
static void run_do_fork_test(void)
{
init_simple_test();
ts.tst = do_fork_test;
ts.name = "do_fork_test";
/* Activate test with initial breakpoint */
kgdb_breakpoint();
}
static void run_sys_open_test(void)
{
init_simple_test();
ts.tst = sys_open_test;
ts.name = "sys_open_test";
/* Activate test with initial breakpoint */
kgdb_breakpoint();
}
static void run_singlestep_break_test(void)
{
init_simple_test();
ts.tst = singlestep_break_test;
ts.name = "singlestep_breakpoint_test";
/* Activate test with initial breakpoint */
kgdb_breakpoint();
kgdbts_break_test();
kgdbts_break_test();
}
static void kgdbts_run_tests(void)
{
char *ptr;
int fork_test = 0;
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
int do_sys_open_test = 0;
int sstep_test = 1000;
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
int nmi_sleep = 0;
int i;
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
ptr = strchr(config, 'F');
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
if (ptr)
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
fork_test = simple_strtol(ptr + 1, NULL, 10);
ptr = strchr(config, 'S');
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
if (ptr)
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
do_sys_open_test = simple_strtol(ptr + 1, NULL, 10);
ptr = strchr(config, 'N');
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
if (ptr)
nmi_sleep = simple_strtol(ptr+1, NULL, 10);
ptr = strchr(config, 'I');
if (ptr)
sstep_test = simple_strtol(ptr+1, NULL, 10);
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
/* required internal KGDB tests */
v1printk("kgdbts:RUN plant and detach test\n");
run_plant_and_detach_test(0);
v1printk("kgdbts:RUN sw breakpoint test\n");
run_breakpoint_test(0);
v1printk("kgdbts:RUN bad memory access test\n");
run_bad_read_test();
v1printk("kgdbts:RUN singlestep test %i iterations\n", sstep_test);
for (i = 0; i < sstep_test; i++) {
run_singlestep_break_test();
if (i % 100 == 0)
v1printk("kgdbts:RUN singlestep [%i/%i]\n",
i, sstep_test);
}
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
/* ===Optional tests=== */
/* All HW break point tests */
if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) {
hwbreaks_ok = 1;
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
v1printk("kgdbts:RUN hw breakpoint test\n");
run_breakpoint_test(1);
v1printk("kgdbts:RUN hw write breakpoint test\n");
run_hw_break_test(1);
v1printk("kgdbts:RUN access write breakpoint test\n");
run_hw_break_test(0);
}
if (nmi_sleep) {
v1printk("kgdbts:RUN NMI sleep %i seconds test\n", nmi_sleep);
run_nmi_sleep_test(nmi_sleep);
}
#ifdef CONFIG_DEBUG_RODATA
/* Until there is an api to write to read-only text segments, use
* HW breakpoints for the remainder of any tests, else print a
* failure message if hw breakpoints do not work.
*/
if (!(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT && hwbreaks_ok)) {
eprintk("kgdbts: HW breakpoints do not work,"
"skipping remaining tests\n");
return;
}
force_hwbrks = 1;
#endif /* CONFIG_DEBUG_RODATA */
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
/* If the do_fork test is run it will be the last test that is
* executed because a kernel thread will be spawned at the very
* end to unregister the debug hooks.
*/
if (fork_test) {
repeat_test = fork_test;
printk(KERN_INFO "kgdbts:RUN do_fork for %i breakpoints\n",
repeat_test);
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
kthread_run(kgdbts_unreg_thread, NULL, "kgdbts_unreg");
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
run_do_fork_test();
return;
}
/* If the sys_open test is run it will be the last test that is
* executed because a kernel thread will be spawned at the very
* end to unregister the debug hooks.
*/
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
if (do_sys_open_test) {
repeat_test = do_sys_open_test;
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
printk(KERN_INFO "kgdbts:RUN sys_open for %i breakpoints\n",
repeat_test);
kgdb: trivial sparse fixes in kgdb test-suite Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-24 21:57:23 +00:00
kthread_run(kgdbts_unreg_thread, NULL, "kgdbts_unreg");
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
run_sys_open_test();
return;
}
/* Shutdown and unregister */
kgdb_unregister_io_module(&kgdbts_io_ops);
configured = 0;
}
static int kgdbts_option_setup(char *opt)
{
if (strlen(opt) >= MAX_CONFIG_LEN) {
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
printk(KERN_ERR "kgdbts: config string too long\n");
return -ENOSPC;
}
strcpy(config, opt);
verbose = 0;
if (strstr(config, "V1"))
verbose = 1;
if (strstr(config, "V2"))
verbose = 2;
return 0;
}
__setup("kgdbts=", kgdbts_option_setup);
static int configure_kgdbts(void)
{
int err = 0;
if (!strlen(config) || isspace(config[0]))
goto noconfig;
err = kgdbts_option_setup(config);
if (err)
goto noconfig;
final_ack = 0;
run_plant_and_detach_test(1);
err = kgdb_register_io_module(&kgdbts_io_ops);
if (err) {
configured = 0;
return err;
}
configured = 1;
kgdbts_run_tests();
return err;
noconfig:
config[0] = 0;
configured = 0;
return err;
}
static int __init init_kgdbts(void)
{
/* Already configured? */
if (configured == 1)
return 0;
return configure_kgdbts();
}
static int kgdbts_get_char(void)
{
int val = 0;
if (ts.run_test)
val = ts.run_test(1, 0);
return val;
}
static void kgdbts_put_char(u8 chr)
{
if (ts.run_test)
ts.run_test(0, chr);
}
static int param_set_kgdbts_var(const char *kmessage, struct kernel_param *kp)
{
int len = strlen(kmessage);
if (len >= MAX_CONFIG_LEN) {
printk(KERN_ERR "kgdbts: config string too long\n");
return -ENOSPC;
}
/* Only copy in the string if the init function has not run yet */
if (configured < 0) {
strcpy(config, kmessage);
return 0;
}
kgdbts: prevent re-entry to kgdbts before it unregisters The "kgdb_connected" variable of debug_core just indicates whether or not kgdbts is connected to the debug_core. It does not completely prevent a script from trying invoke kgdbts again and possibly crashing the system (see Call Trace below). The configured variable in kgtbts can be used instead of kgdb_connected instead of kgdb_connected. The cleanup_kgdbts() can also be removed because there is no possible way to build kgdbts as a kernel module that you could unload with rmmod. Call Trace: ----------------------------------------------------------------- root:/$ echo kgdbts=V1S1000 > /sys/module/kgdbts/parameters/kgdbts kgdb: Unregistered I/O driver kgdbts, debugger disabled. ------------[ cut here ]------------ WARNING: at kernel/debug/debug_core.c:1002 kgdb_unregister_io_module+0xec/0x100() Hardware name: Moon Creek platform Modules linked in: Pid: 664, comm: sh Not tainted 2.6.34.1-WR4.0.0.0_standard #58 Call Trace: [<c103b1ed>] warn_slowpath_common+0x6d/0xa0 [<c1079fdc>] ? kgdb_unregister_io_module+0xec/0x100 [<c1079fdc>] ? kgdb_unregister_io_module+0xec/0x100 [<c10544e0>] ? param_attr_store+0x0/0x20 [<c103b235>] warn_slowpath_null+0x15/0x20 [<c1079fdc>] kgdb_unregister_io_module+0xec/0x100 [<c124e4ea>] cleanup_kgdbts+0x1a/0x20 [<c124eced>] param_set_kgdbts_var+0x6d/0xb0 [<c124ec80>] ? param_set_kgdbts_var+0x0/0xb0 [<c10544f7>] param_attr_store+0x17/0x20 [<c105457c>] module_attr_store+0x2c/0x40 [<c111fe84>] sysfs_write_file+0x94/0xf0 [<c10d42f6>] vfs_write+0x96/0x130 [<c111fdf0>] ? sysfs_write_file+0x0/0xf0 [<c10d44d6>] sys_write+0x46/0xd0 [<c13bf329>] system_call_done+0x0/0x4 ---[ end trace 4eb028c6ee43154c ]--- kgdb: Unregistered I/O driver kgdbts, debugger disabled. ----------------------------------------------------------------- [jason.wessel@windriver.com: remove cleanup_kgdbts() ] Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-31 02:06:00 +00:00
if (configured == 1) {
printk(KERN_ERR "kgdbts: ERROR: Already configured and running.\n");
kgdb: add kgdb internal test suite This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 22:34:17 +00:00
return -EBUSY;
}
strcpy(config, kmessage);
/* Chop out \n char as a result of echo */
if (config[len - 1] == '\n')
config[len - 1] = '\0';
/* Go and configure with the new params. */
return configure_kgdbts();
}
static void kgdbts_pre_exp_handler(void)
{
/* Increment the module count when the debugger is active */
if (!kgdb_connected)
try_module_get(THIS_MODULE);
}
static void kgdbts_post_exp_handler(void)
{
/* decrement the module count when the debugger detaches */
if (!kgdb_connected)
module_put(THIS_MODULE);
}
static struct kgdb_io kgdbts_io_ops = {
.name = "kgdbts",
.read_char = kgdbts_get_char,
.write_char = kgdbts_put_char,
.pre_exception = kgdbts_pre_exp_handler,
.post_exception = kgdbts_post_exp_handler,
};
module_init(init_kgdbts);
module_param_call(kgdbts, param_set_kgdbts_var, param_get_string, &kps, 0644);
MODULE_PARM_DESC(kgdbts, "<A|V1|V2>[F#|S#][N#]");
MODULE_DESCRIPTION("KGDB Test Suite");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Wind River Systems, Inc.");