linux/net/mac80211/ieee80211.c

1301 lines
35 KiB
C
Raw Normal View History

/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <net/mac80211.h>
#include <net/ieee80211_radiotap.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <linux/wireless.h>
#include <linux/rtnetlink.h>
#include <linux/bitmap.h>
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 18:56:21 +00:00
#include <net/net_namespace.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
#include "ieee80211_rate.h"
#include "wep.h"
#include "wme.h"
#include "aes_ccm.h"
#include "ieee80211_led.h"
#include "cfg.h"
#include "debugfs.h"
#include "debugfs_netdev.h"
/*
* For seeing transmitted packets on monitor interfaces
* we have a radiotap header too.
*/
struct ieee80211_tx_status_rtap_hdr {
struct ieee80211_radiotap_header hdr;
__le16 tx_flags;
u8 data_retries;
} __attribute__ ((packed));
/* common interface routines */
static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr)
{
memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */
return ETH_ALEN;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
/* must be called under mdev tx lock */
static void ieee80211_configure_filter(struct ieee80211_local *local)
{
unsigned int changed_flags;
unsigned int new_flags = 0;
if (atomic_read(&local->iff_promiscs))
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
new_flags |= FIF_PROMISC_IN_BSS;
if (atomic_read(&local->iff_allmultis))
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
new_flags |= FIF_ALLMULTI;
if (local->monitors)
new_flags |= FIF_CONTROL |
FIF_OTHER_BSS |
FIF_BCN_PRBRESP_PROMISC;
changed_flags = local->filter_flags ^ new_flags;
/* be a bit nasty */
new_flags |= (1<<31);
local->ops->configure_filter(local_to_hw(local),
changed_flags, &new_flags,
local->mdev->mc_count,
local->mdev->mc_list);
WARN_ON(new_flags & (1<<31));
local->filter_flags = new_flags & ~(1<<31);
}
/* master interface */
static int ieee80211_master_open(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata;
int res = -EOPNOTSUPP;
/* we hold the RTNL here so can safely walk the list */
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->dev != dev && netif_running(sdata->dev)) {
res = 0;
break;
}
}
return res;
}
static int ieee80211_master_stop(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata;
/* we hold the RTNL here so can safely walk the list */
list_for_each_entry(sdata, &local->interfaces, list)
if (sdata->dev != dev && netif_running(sdata->dev))
dev_close(sdata->dev);
return 0;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
static void ieee80211_master_set_multicast_list(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
ieee80211_configure_filter(local);
}
/* regular interfaces */
static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
{
/* FIX: what would be proper limits for MTU?
* This interface uses 802.3 frames. */
if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6) {
printk(KERN_WARNING "%s: invalid MTU %d\n",
dev->name, new_mtu);
return -EINVAL;
}
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu);
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
dev->mtu = new_mtu;
return 0;
}
static inline int identical_mac_addr_allowed(int type1, int type2)
{
return (type1 == IEEE80211_IF_TYPE_MNTR ||
type2 == IEEE80211_IF_TYPE_MNTR ||
(type1 == IEEE80211_IF_TYPE_AP &&
type2 == IEEE80211_IF_TYPE_WDS) ||
(type1 == IEEE80211_IF_TYPE_WDS &&
(type2 == IEEE80211_IF_TYPE_WDS ||
type2 == IEEE80211_IF_TYPE_AP)) ||
(type1 == IEEE80211_IF_TYPE_AP &&
type2 == IEEE80211_IF_TYPE_VLAN) ||
(type1 == IEEE80211_IF_TYPE_VLAN &&
(type2 == IEEE80211_IF_TYPE_AP ||
type2 == IEEE80211_IF_TYPE_VLAN)));
}
static int ieee80211_open(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata, *nsdata;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_if_init_conf conf;
int res;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
/* we hold the RTNL here so can safely walk the list */
list_for_each_entry(nsdata, &local->interfaces, list) {
struct net_device *ndev = nsdata->dev;
if (ndev != dev && ndev != local->mdev && netif_running(ndev) &&
compare_ether_addr(dev->dev_addr, ndev->dev_addr) == 0) {
/*
* check whether it may have the same address
*/
if (!identical_mac_addr_allowed(sdata->type,
nsdata->type))
return -ENOTUNIQ;
/*
* can only add VLANs to enabled APs
*/
if (sdata->type == IEEE80211_IF_TYPE_VLAN &&
nsdata->type == IEEE80211_IF_TYPE_AP &&
netif_running(nsdata->dev))
sdata->u.vlan.ap = nsdata;
}
}
switch (sdata->type) {
case IEEE80211_IF_TYPE_WDS:
if (is_zero_ether_addr(sdata->u.wds.remote_addr))
return -ENOLINK;
break;
case IEEE80211_IF_TYPE_VLAN:
if (!sdata->u.vlan.ap)
return -ENOLINK;
break;
case IEEE80211_IF_TYPE_AP:
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_MNTR:
case IEEE80211_IF_TYPE_IBSS:
/* no special treatment */
break;
case IEEE80211_IF_TYPE_INVALID:
/* cannot happen */
WARN_ON(1);
break;
}
if (local->open_count == 0) {
res = 0;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (local->ops->start)
res = local->ops->start(local_to_hw(local));
if (res)
return res;
ieee80211_hw_config(local);
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
switch (sdata->type) {
case IEEE80211_IF_TYPE_VLAN:
list_add(&sdata->u.vlan.list, &sdata->u.vlan.ap->u.ap.vlans);
/* no need to tell driver */
break;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
case IEEE80211_IF_TYPE_MNTR:
/* must be before the call to ieee80211_configure_filter */
local->monitors++;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (local->monitors == 1) {
netif_tx_lock_bh(local->mdev);
ieee80211_configure_filter(local);
netif_tx_unlock_bh(local->mdev);
local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
}
break;
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
sdata->u.sta.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
/* fall through */
default:
conf.if_id = dev->ifindex;
conf.type = sdata->type;
conf.mac_addr = dev->dev_addr;
res = local->ops->add_interface(local_to_hw(local), &conf);
if (res && !local->open_count && local->ops->stop)
local->ops->stop(local_to_hw(local));
if (res)
return res;
ieee80211_if_config(dev);
ieee80211_reset_erp_info(dev);
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 21:01:55 +00:00
ieee80211_enable_keys(sdata);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (sdata->type == IEEE80211_IF_TYPE_STA &&
!(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME))
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
netif_carrier_off(dev);
else
netif_carrier_on(dev);
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (local->open_count == 0) {
res = dev_open(local->mdev);
WARN_ON(res);
tasklet_enable(&local->tx_pending_tasklet);
tasklet_enable(&local->tasklet);
}
/*
* set_multicast_list will be invoked by the networking core
* which will check whether any increments here were done in
* error and sync them down to the hardware as filter flags.
*/
if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
atomic_inc(&local->iff_allmultis);
if (sdata->flags & IEEE80211_SDATA_PROMISC)
atomic_inc(&local->iff_promiscs);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
local->open_count++;
netif_start_queue(dev);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
return 0;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
static int ieee80211_stop(struct net_device *dev)
{
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
struct ieee80211_sub_if_data *sdata;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
struct ieee80211_if_init_conf conf;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
netif_stop_queue(dev);
/*
* Don't count this interface for promisc/allmulti while it
* is down. dev_mc_unsync() will invoke set_multicast_list
* on the master interface which will sync these down to the
* hardware as filter flags.
*/
if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
atomic_dec(&local->iff_allmultis);
if (sdata->flags & IEEE80211_SDATA_PROMISC)
atomic_dec(&local->iff_promiscs);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
dev_mc_unsync(local->mdev, dev);
/* down all dependent devices, that is VLANs */
if (sdata->type == IEEE80211_IF_TYPE_AP) {
struct ieee80211_sub_if_data *vlan, *tmp;
list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans,
u.vlan.list)
dev_close(vlan->dev);
WARN_ON(!list_empty(&sdata->u.ap.vlans));
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
local->open_count--;
switch (sdata->type) {
case IEEE80211_IF_TYPE_VLAN:
list_del(&sdata->u.vlan.list);
sdata->u.vlan.ap = NULL;
/* no need to tell driver */
break;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
case IEEE80211_IF_TYPE_MNTR:
local->monitors--;
if (local->monitors == 0) {
netif_tx_lock_bh(local->mdev);
ieee80211_configure_filter(local);
netif_tx_unlock_bh(local->mdev);
local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
}
break;
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
sdata->u.sta.state = IEEE80211_DISABLED;
del_timer_sync(&sdata->u.sta.timer);
/*
* When we get here, the interface is marked down.
* Call synchronize_rcu() to wait for the RX path
* should it be using the interface and enqueuing
* frames at this very time on another CPU.
*/
synchronize_rcu();
skb_queue_purge(&sdata->u.sta.skb_queue);
if (!local->ops->hw_scan &&
local->scan_dev == sdata->dev) {
local->sta_scanning = 0;
cancel_delayed_work(&local->scan_work);
}
flush_workqueue(local->hw.workqueue);
sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
kfree(sdata->u.sta.extra_ie);
sdata->u.sta.extra_ie = NULL;
sdata->u.sta.extra_ie_len = 0;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
/* fall through */
default:
conf.if_id = dev->ifindex;
conf.type = sdata->type;
conf.mac_addr = dev->dev_addr;
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 21:01:55 +00:00
/* disable all keys for as long as this netdev is down */
ieee80211_disable_keys(sdata);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
local->ops->remove_interface(local_to_hw(local), &conf);
}
if (local->open_count == 0) {
if (netif_running(local->mdev))
dev_close(local->mdev);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (local->ops->stop)
local->ops->stop(local_to_hw(local));
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
tasklet_disable(&local->tx_pending_tasklet);
tasklet_disable(&local->tasklet);
}
return 0;
}
static void ieee80211_set_multicast_list(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
int allmulti, promisc, sdata_allmulti, sdata_promisc;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
allmulti = !!(dev->flags & IFF_ALLMULTI);
promisc = !!(dev->flags & IFF_PROMISC);
sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (allmulti != sdata_allmulti) {
if (dev->flags & IFF_ALLMULTI)
atomic_inc(&local->iff_allmultis);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
else
atomic_dec(&local->iff_allmultis);
sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (promisc != sdata_promisc) {
if (dev->flags & IFF_PROMISC)
atomic_inc(&local->iff_promiscs);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
else
atomic_dec(&local->iff_promiscs);
sdata->flags ^= IEEE80211_SDATA_PROMISC;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
dev_mc_sync(local->mdev, dev);
}
static const struct header_ops ieee80211_header_ops = {
.create = eth_header,
.parse = header_parse_80211,
.rebuild = eth_rebuild_header,
.cache = eth_header_cache,
.cache_update = eth_header_cache_update,
};
/* Must not be called for mdev */
void ieee80211_if_setup(struct net_device *dev)
{
ether_setup(dev);
dev->hard_start_xmit = ieee80211_subif_start_xmit;
dev->wireless_handlers = &ieee80211_iw_handler_def;
dev->set_multicast_list = ieee80211_set_multicast_list;
dev->change_mtu = ieee80211_change_mtu;
dev->open = ieee80211_open;
dev->stop = ieee80211_stop;
dev->destructor = ieee80211_if_free;
}
/* WDS specialties */
int ieee80211_if_update_wds(struct net_device *dev, u8 *remote_addr)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sta_info *sta;
DECLARE_MAC_BUF(mac);
if (compare_ether_addr(remote_addr, sdata->u.wds.remote_addr) == 0)
return 0;
/* Create STA entry for the new peer */
sta = sta_info_add(local, dev, remote_addr, GFP_KERNEL);
if (!sta)
return -ENOMEM;
sta_info_put(sta);
/* Remove STA entry for the old peer */
sta = sta_info_get(local, sdata->u.wds.remote_addr);
if (sta) {
sta_info_free(sta);
sta_info_put(sta);
} else {
printk(KERN_DEBUG "%s: could not find STA entry for WDS link "
"peer %s\n",
dev->name, print_mac(mac, sdata->u.wds.remote_addr));
}
/* Update WDS link data */
memcpy(&sdata->u.wds.remote_addr, remote_addr, ETH_ALEN);
return 0;
}
/* everything else */
static int __ieee80211_if_config(struct net_device *dev,
struct sk_buff *beacon,
struct ieee80211_tx_control *control)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_if_conf conf;
if (!local->ops->config_interface || !netif_running(dev))
return 0;
memset(&conf, 0, sizeof(conf));
conf.type = sdata->type;
if (sdata->type == IEEE80211_IF_TYPE_STA ||
sdata->type == IEEE80211_IF_TYPE_IBSS) {
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
conf.bssid = sdata->u.sta.bssid;
conf.ssid = sdata->u.sta.ssid;
conf.ssid_len = sdata->u.sta.ssid_len;
} else if (sdata->type == IEEE80211_IF_TYPE_AP) {
conf.ssid = sdata->u.ap.ssid;
conf.ssid_len = sdata->u.ap.ssid_len;
conf.beacon = beacon;
conf.beacon_control = control;
}
return local->ops->config_interface(local_to_hw(local),
dev->ifindex, &conf);
}
int ieee80211_if_config(struct net_device *dev)
{
return __ieee80211_if_config(dev, NULL, NULL);
}
int ieee80211_if_config_beacon(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_tx_control control;
struct sk_buff *skb;
if (!(local->hw.flags & IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE))
return 0;
skb = ieee80211_beacon_get(local_to_hw(local), dev->ifindex, &control);
if (!skb)
return -ENOMEM;
return __ieee80211_if_config(dev, skb, &control);
}
int ieee80211_hw_config(struct ieee80211_local *local)
{
struct ieee80211_hw_mode *mode;
struct ieee80211_channel *chan;
int ret = 0;
if (local->sta_scanning) {
chan = local->scan_channel;
mode = local->scan_hw_mode;
} else {
chan = local->oper_channel;
mode = local->oper_hw_mode;
}
local->hw.conf.channel = chan->chan;
local->hw.conf.channel_val = chan->val;
if (!local->hw.conf.power_level) {
local->hw.conf.power_level = chan->power_level;
} else {
local->hw.conf.power_level = min(chan->power_level,
local->hw.conf.power_level);
}
local->hw.conf.freq = chan->freq;
local->hw.conf.phymode = mode->mode;
local->hw.conf.antenna_max = chan->antenna_max;
local->hw.conf.chan = chan;
local->hw.conf.mode = mode;
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
printk(KERN_DEBUG "HW CONFIG: channel=%d freq=%d "
"phymode=%d\n", local->hw.conf.channel, local->hw.conf.freq,
local->hw.conf.phymode);
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
if (local->open_count)
ret = local->ops->config(local_to_hw(local), &local->hw.conf);
return ret;
}
void ieee80211_erp_info_change_notify(struct net_device *dev, u8 changes)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (local->ops->erp_ie_changed)
local->ops->erp_ie_changed(local_to_hw(local), changes,
!!(sdata->flags & IEEE80211_SDATA_USE_PROTECTION),
!(sdata->flags & IEEE80211_SDATA_SHORT_PREAMBLE));
}
void ieee80211_reset_erp_info(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
sdata->flags &= ~(IEEE80211_SDATA_USE_PROTECTION |
IEEE80211_SDATA_SHORT_PREAMBLE);
ieee80211_erp_info_change_notify(dev,
IEEE80211_ERP_CHANGE_PROTECTION |
IEEE80211_ERP_CHANGE_PREAMBLE);
}
void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
struct sk_buff *skb,
struct ieee80211_tx_status *status)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_tx_status *saved;
int tmp;
skb->dev = local->mdev;
saved = kmalloc(sizeof(struct ieee80211_tx_status), GFP_ATOMIC);
if (unlikely(!saved)) {
if (net_ratelimit())
printk(KERN_WARNING "%s: Not enough memory, "
"dropping tx status", skb->dev->name);
/* should be dev_kfree_skb_irq, but due to this function being
* named _irqsafe instead of just _irq we can't be sure that
* people won't call it from non-irq contexts */
dev_kfree_skb_any(skb);
return;
}
memcpy(saved, status, sizeof(struct ieee80211_tx_status));
/* copy pointer to saved status into skb->cb for use by tasklet */
memcpy(skb->cb, &saved, sizeof(saved));
skb->pkt_type = IEEE80211_TX_STATUS_MSG;
skb_queue_tail(status->control.flags & IEEE80211_TXCTL_REQ_TX_STATUS ?
&local->skb_queue : &local->skb_queue_unreliable, skb);
tmp = skb_queue_len(&local->skb_queue) +
skb_queue_len(&local->skb_queue_unreliable);
while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
(skb = skb_dequeue(&local->skb_queue_unreliable))) {
memcpy(&saved, skb->cb, sizeof(saved));
kfree(saved);
dev_kfree_skb_irq(skb);
tmp--;
I802_DEBUG_INC(local->tx_status_drop);
}
tasklet_schedule(&local->tasklet);
}
EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
static void ieee80211_tasklet_handler(unsigned long data)
{
struct ieee80211_local *local = (struct ieee80211_local *) data;
struct sk_buff *skb;
struct ieee80211_rx_status rx_status;
struct ieee80211_tx_status *tx_status;
while ((skb = skb_dequeue(&local->skb_queue)) ||
(skb = skb_dequeue(&local->skb_queue_unreliable))) {
switch (skb->pkt_type) {
case IEEE80211_RX_MSG:
/* status is in skb->cb */
memcpy(&rx_status, skb->cb, sizeof(rx_status));
/* Clear skb->type in order to not confuse kernel
* netstack. */
skb->pkt_type = 0;
__ieee80211_rx(local_to_hw(local), skb, &rx_status);
break;
case IEEE80211_TX_STATUS_MSG:
/* get pointer to saved status out of skb->cb */
memcpy(&tx_status, skb->cb, sizeof(tx_status));
skb->pkt_type = 0;
ieee80211_tx_status(local_to_hw(local),
skb, tx_status);
kfree(tx_status);
break;
default: /* should never get here! */
printk(KERN_ERR "%s: Unknown message type (%d)\n",
wiphy_name(local->hw.wiphy), skb->pkt_type);
dev_kfree_skb(skb);
break;
}
}
}
/* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
* make a prepared TX frame (one that has been given to hw) to look like brand
* new IEEE 802.11 frame that is ready to go through TX processing again.
* Also, tx_packet_data in cb is restored from tx_control. */
static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
struct ieee80211_key *key,
struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
int hdrlen, iv_len, mic_len;
struct ieee80211_tx_packet_data *pkt_data;
pkt_data = (struct ieee80211_tx_packet_data *)skb->cb;
pkt_data->ifindex = control->ifindex;
pkt_data->flags = 0;
if (control->flags & IEEE80211_TXCTL_REQ_TX_STATUS)
pkt_data->flags |= IEEE80211_TXPD_REQ_TX_STATUS;
if (control->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)
pkt_data->flags |= IEEE80211_TXPD_DO_NOT_ENCRYPT;
if (control->flags & IEEE80211_TXCTL_REQUEUE)
pkt_data->flags |= IEEE80211_TXPD_REQUEUE;
pkt_data->queue = control->queue;
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
if (!key)
goto no_key;
switch (key->conf.alg) {
case ALG_WEP:
iv_len = WEP_IV_LEN;
mic_len = WEP_ICV_LEN;
break;
case ALG_TKIP:
iv_len = TKIP_IV_LEN;
mic_len = TKIP_ICV_LEN;
break;
case ALG_CCMP:
iv_len = CCMP_HDR_LEN;
mic_len = CCMP_MIC_LEN;
break;
default:
goto no_key;
}
if (skb->len >= mic_len &&
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 21:01:55 +00:00
!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
skb_trim(skb, skb->len - mic_len);
if (skb->len >= iv_len && skb->len > hdrlen) {
memmove(skb->data + iv_len, skb->data, hdrlen);
skb_pull(skb, iv_len);
}
no_key:
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
u16 fc = le16_to_cpu(hdr->frame_control);
if ((fc & 0x8C) == 0x88) /* QoS Control Field */ {
fc &= ~IEEE80211_STYPE_QOS_DATA;
hdr->frame_control = cpu_to_le16(fc);
memmove(skb->data + 2, skb->data, hdrlen - 2);
skb_pull(skb, 2);
}
}
}
void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_tx_status *status)
{
struct sk_buff *skb2;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_local *local = hw_to_local(hw);
u16 frag, type;
struct ieee80211_tx_status_rtap_hdr *rthdr;
struct ieee80211_sub_if_data *sdata;
int monitors;
if (!status) {
printk(KERN_ERR
"%s: ieee80211_tx_status called with NULL status\n",
wiphy_name(local->hw.wiphy));
dev_kfree_skb(skb);
return;
}
if (status->excessive_retries) {
struct sta_info *sta;
sta = sta_info_get(local, hdr->addr1);
if (sta) {
if (sta->flags & WLAN_STA_PS) {
/* The STA is in power save mode, so assume
* that this TX packet failed because of that.
*/
status->excessive_retries = 0;
status->flags |= IEEE80211_TX_STATUS_TX_FILTERED;
}
sta_info_put(sta);
}
}
if (status->flags & IEEE80211_TX_STATUS_TX_FILTERED) {
struct sta_info *sta;
sta = sta_info_get(local, hdr->addr1);
if (sta) {
sta->tx_filtered_count++;
/* Clear the TX filter mask for this STA when sending
* the next packet. If the STA went to power save mode,
* this will happen when it is waking up for the next
* time. */
sta->clear_dst_mask = 1;
/* TODO: Is the WLAN_STA_PS flag always set here or is
* the race between RX and TX status causing some
* packets to be filtered out before 80211.o gets an
* update for PS status? This seems to be the case, so
* no changes are likely to be needed. */
if (sta->flags & WLAN_STA_PS &&
skb_queue_len(&sta->tx_filtered) <
STA_MAX_TX_BUFFER) {
ieee80211_remove_tx_extra(local, sta->key,
skb,
&status->control);
skb_queue_tail(&sta->tx_filtered, skb);
} else if (!(sta->flags & WLAN_STA_PS) &&
!(status->control.flags & IEEE80211_TXCTL_REQUEUE)) {
/* Software retry the packet once */
status->control.flags |= IEEE80211_TXCTL_REQUEUE;
ieee80211_remove_tx_extra(local, sta->key,
skb,
&status->control);
dev_queue_xmit(skb);
} else {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: dropped TX "
"filtered frame queue_len=%d "
"PS=%d @%lu\n",
wiphy_name(local->hw.wiphy),
skb_queue_len(
&sta->tx_filtered),
!!(sta->flags & WLAN_STA_PS),
jiffies);
}
dev_kfree_skb(skb);
}
sta_info_put(sta);
return;
}
} else {
/* FIXME: STUPID to call this with both local and local->mdev */
rate_control_tx_status(local, local->mdev, skb, status);
}
ieee80211_led_tx(local, 0);
/* SNMP counters
* Fragments are passed to low-level drivers as separate skbs, so these
* are actually fragments, not frames. Update frame counters only for
* the first fragment of the frame. */
frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
if (status->flags & IEEE80211_TX_STATUS_ACK) {
if (frag == 0) {
local->dot11TransmittedFrameCount++;
if (is_multicast_ether_addr(hdr->addr1))
local->dot11MulticastTransmittedFrameCount++;
if (status->retry_count > 0)
local->dot11RetryCount++;
if (status->retry_count > 1)
local->dot11MultipleRetryCount++;
}
/* This counter shall be incremented for an acknowledged MPDU
* with an individual address in the address 1 field or an MPDU
* with a multicast address in the address 1 field of type Data
* or Management. */
if (!is_multicast_ether_addr(hdr->addr1) ||
type == IEEE80211_FTYPE_DATA ||
type == IEEE80211_FTYPE_MGMT)
local->dot11TransmittedFragmentCount++;
} else {
if (frag == 0)
local->dot11FailedCount++;
}
/* this was a transmitted frame, but now we want to reuse it */
skb_orphan(skb);
if (!local->monitors) {
dev_kfree_skb(skb);
return;
}
/* send frame to monitor interfaces now */
if (skb_headroom(skb) < sizeof(*rthdr)) {
printk(KERN_ERR "ieee80211_tx_status: headroom too small\n");
dev_kfree_skb(skb);
return;
}
rthdr = (struct ieee80211_tx_status_rtap_hdr*)
skb_push(skb, sizeof(*rthdr));
memset(rthdr, 0, sizeof(*rthdr));
rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
rthdr->hdr.it_present =
cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
(1 << IEEE80211_RADIOTAP_DATA_RETRIES));
if (!(status->flags & IEEE80211_TX_STATUS_ACK) &&
!is_multicast_ether_addr(hdr->addr1))
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
if ((status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) &&
(status->control.flags & IEEE80211_TXCTL_USE_CTS_PROTECT))
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
else if (status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS)
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
rthdr->data_retries = status->retry_count;
rcu_read_lock();
monitors = local->monitors;
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
/*
* Using the monitors counter is possibly racy, but
* if the value is wrong we simply either clone the skb
* once too much or forget sending it to one monitor iface
* The latter case isn't nice but fixing the race is much
* more complicated.
*/
if (!monitors || !skb)
goto out;
if (sdata->type == IEEE80211_IF_TYPE_MNTR) {
if (!netif_running(sdata->dev))
continue;
monitors--;
if (monitors)
skb2 = skb_clone(skb, GFP_ATOMIC);
else
skb2 = NULL;
skb->dev = sdata->dev;
/* XXX: is this sufficient for BPF? */
skb_set_mac_header(skb, 0);
skb->ip_summed = CHECKSUM_UNNECESSARY;
skb->pkt_type = PACKET_OTHERHOST;
skb->protocol = htons(ETH_P_802_2);
memset(skb->cb, 0, sizeof(skb->cb));
netif_rx(skb);
skb = skb2;
}
}
out:
rcu_read_unlock();
if (skb)
dev_kfree_skb(skb);
}
EXPORT_SYMBOL(ieee80211_tx_status);
struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
const struct ieee80211_ops *ops)
{
struct net_device *mdev;
struct ieee80211_local *local;
struct ieee80211_sub_if_data *sdata;
int priv_size;
struct wiphy *wiphy;
/* Ensure 32-byte alignment of our private data and hw private data.
* We use the wiphy priv data for both our ieee80211_local and for
* the driver's private data
*
* In memory it'll be like this:
*
* +-------------------------+
* | struct wiphy |
* +-------------------------+
* | struct ieee80211_local |
* +-------------------------+
* | driver's private data |
* +-------------------------+
*
*/
priv_size = ((sizeof(struct ieee80211_local) +
NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) +
priv_data_len;
wiphy = wiphy_new(&mac80211_config_ops, priv_size);
if (!wiphy)
return NULL;
wiphy->privid = mac80211_wiphy_privid;
local = wiphy_priv(wiphy);
local->hw.wiphy = wiphy;
local->hw.priv = (char *)local +
((sizeof(struct ieee80211_local) +
NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
BUG_ON(!ops->tx);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
BUG_ON(!ops->start);
BUG_ON(!ops->stop);
BUG_ON(!ops->config);
BUG_ON(!ops->add_interface);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
BUG_ON(!ops->remove_interface);
BUG_ON(!ops->configure_filter);
local->ops = ops;
/* for now, mdev needs sub_if_data :/ */
mdev = alloc_netdev(sizeof(struct ieee80211_sub_if_data),
"wmaster%d", ether_setup);
if (!mdev) {
wiphy_free(wiphy);
return NULL;
}
sdata = IEEE80211_DEV_TO_SUB_IF(mdev);
mdev->ieee80211_ptr = &sdata->wdev;
sdata->wdev.wiphy = wiphy;
local->hw.queues = 1; /* default */
local->mdev = mdev;
local->rx_pre_handlers = ieee80211_rx_pre_handlers;
local->rx_handlers = ieee80211_rx_handlers;
local->tx_handlers = ieee80211_tx_handlers;
local->bridge_packets = 1;
local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
local->short_retry_limit = 7;
local->long_retry_limit = 4;
local->hw.conf.radio_enabled = 1;
local->enabled_modes = ~0;
INIT_LIST_HEAD(&local->modes_list);
INIT_LIST_HEAD(&local->interfaces);
INIT_DELAYED_WORK(&local->scan_work, ieee80211_sta_scan_work);
ieee80211_rx_bss_list_init(mdev);
sta_info_init(local);
mdev->hard_start_xmit = ieee80211_master_start_xmit;
mdev->open = ieee80211_master_open;
mdev->stop = ieee80211_master_stop;
mdev->type = ARPHRD_IEEE80211;
mdev->header_ops = &ieee80211_header_ops;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
mdev->set_multicast_list = ieee80211_master_set_multicast_list;
sdata->type = IEEE80211_IF_TYPE_AP;
sdata->dev = mdev;
sdata->local = local;
sdata->u.ap.force_unicast_rateidx = -1;
sdata->u.ap.max_ratectrl_rateidx = -1;
ieee80211_if_sdata_init(sdata);
/* no RCU needed since we're still during init phase */
list_add_tail(&sdata->list, &local->interfaces);
tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
(unsigned long)local);
tasklet_disable(&local->tx_pending_tasklet);
tasklet_init(&local->tasklet,
ieee80211_tasklet_handler,
(unsigned long) local);
tasklet_disable(&local->tasklet);
skb_queue_head_init(&local->skb_queue);
skb_queue_head_init(&local->skb_queue_unreliable);
return local_to_hw(local);
}
EXPORT_SYMBOL(ieee80211_alloc_hw);
int ieee80211_register_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
const char *name;
int result;
result = wiphy_register(local->hw.wiphy);
if (result < 0)
return result;
name = wiphy_dev(local->hw.wiphy)->driver->name;
local->hw.workqueue = create_singlethread_workqueue(name);
if (!local->hw.workqueue) {
result = -ENOMEM;
goto fail_workqueue;
}
/*
* The hardware needs headroom for sending the frame,
* and we need some headroom for passing the frame to monitor
* interfaces, but never both at the same time.
*/
local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
sizeof(struct ieee80211_tx_status_rtap_hdr));
debugfs_hw_add(local);
local->hw.conf.beacon_int = 1000;
local->wstats_flags |= local->hw.max_rssi ?
IW_QUAL_LEVEL_UPDATED : IW_QUAL_LEVEL_INVALID;
local->wstats_flags |= local->hw.max_signal ?
IW_QUAL_QUAL_UPDATED : IW_QUAL_QUAL_INVALID;
local->wstats_flags |= local->hw.max_noise ?
IW_QUAL_NOISE_UPDATED : IW_QUAL_NOISE_INVALID;
if (local->hw.max_rssi < 0 || local->hw.max_noise < 0)
local->wstats_flags |= IW_QUAL_DBM;
result = sta_info_start(local);
if (result < 0)
goto fail_sta_info;
rtnl_lock();
result = dev_alloc_name(local->mdev, local->mdev->name);
if (result < 0)
goto fail_dev;
memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(local->mdev, wiphy_dev(local->hw.wiphy));
result = register_netdevice(local->mdev);
if (result < 0)
goto fail_dev;
ieee80211_debugfs_add_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev));
ieee80211_if_set_type(local->mdev, IEEE80211_IF_TYPE_AP);
result = ieee80211_init_rate_ctrl_alg(local,
hw->rate_control_algorithm);
if (result < 0) {
printk(KERN_DEBUG "%s: Failed to initialize rate control "
"algorithm\n", wiphy_name(local->hw.wiphy));
goto fail_rate;
}
result = ieee80211_wep_init(local);
if (result < 0) {
printk(KERN_DEBUG "%s: Failed to initialize wep\n",
wiphy_name(local->hw.wiphy));
goto fail_wep;
}
ieee80211_install_qdisc(local->mdev);
/* add one default STA interface */
result = ieee80211_if_add(local->mdev, "wlan%d", NULL,
IEEE80211_IF_TYPE_STA);
if (result)
printk(KERN_WARNING "%s: Failed to add default virtual iface\n",
wiphy_name(local->hw.wiphy));
local->reg_state = IEEE80211_DEV_REGISTERED;
rtnl_unlock();
ieee80211_led_init(local);
return 0;
fail_wep:
rate_control_deinitialize(local);
fail_rate:
ieee80211_debugfs_remove_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev));
unregister_netdevice(local->mdev);
fail_dev:
rtnl_unlock();
sta_info_stop(local);
fail_sta_info:
debugfs_hw_del(local);
destroy_workqueue(local->hw.workqueue);
fail_workqueue:
wiphy_unregister(local->hw.wiphy);
return result;
}
EXPORT_SYMBOL(ieee80211_register_hw);
int ieee80211_register_hwmode(struct ieee80211_hw *hw,
struct ieee80211_hw_mode *mode)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_rate *rate;
int i;
INIT_LIST_HEAD(&mode->list);
list_add_tail(&mode->list, &local->modes_list);
local->hw_modes |= (1 << mode->mode);
for (i = 0; i < mode->num_rates; i++) {
rate = &(mode->rates[i]);
rate->rate_inv = CHAN_UTIL_RATE_LCM / rate->rate;
}
ieee80211_prepare_rates(local, mode);
if (!local->oper_hw_mode) {
/* Default to this mode */
local->hw.conf.phymode = mode->mode;
local->oper_hw_mode = local->scan_hw_mode = mode;
local->oper_channel = local->scan_channel = &mode->channels[0];
local->hw.conf.mode = local->oper_hw_mode;
local->hw.conf.chan = local->oper_channel;
}
if (!(hw->flags & IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED))
ieee80211_set_default_regdomain(mode);
return 0;
}
EXPORT_SYMBOL(ieee80211_register_hwmode);
void ieee80211_unregister_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata, *tmp;
int i;
tasklet_kill(&local->tx_pending_tasklet);
tasklet_kill(&local->tasklet);
rtnl_lock();
BUG_ON(local->reg_state != IEEE80211_DEV_REGISTERED);
local->reg_state = IEEE80211_DEV_UNREGISTERED;
/*
* At this point, interface list manipulations are fine
* because the driver cannot be handing us frames any
* more and the tasklet is killed.
*/
/*
* First, we remove all non-master interfaces. Do this because they
* may have bss pointer dependency on the master, and when we free
* the master these would be freed as well, breaking our list
* iteration completely.
*/
list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
if (sdata->dev == local->mdev)
continue;
list_del(&sdata->list);
__ieee80211_if_del(local, sdata);
}
/* then, finally, remove the master interface */
__ieee80211_if_del(local, IEEE80211_DEV_TO_SUB_IF(local->mdev));
rtnl_unlock();
ieee80211_rx_bss_list_deinit(local->mdev);
ieee80211_clear_tx_pending(local);
sta_info_stop(local);
rate_control_deinitialize(local);
debugfs_hw_del(local);
for (i = 0; i < NUM_IEEE80211_MODES; i++) {
kfree(local->supp_rates[i]);
kfree(local->basic_rates[i]);
}
if (skb_queue_len(&local->skb_queue)
|| skb_queue_len(&local->skb_queue_unreliable))
printk(KERN_WARNING "%s: skb_queue not empty\n",
wiphy_name(local->hw.wiphy));
skb_queue_purge(&local->skb_queue);
skb_queue_purge(&local->skb_queue_unreliable);
destroy_workqueue(local->hw.workqueue);
wiphy_unregister(local->hw.wiphy);
ieee80211_wep_free(local);
ieee80211_led_exit(local);
}
EXPORT_SYMBOL(ieee80211_unregister_hw);
void ieee80211_free_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
ieee80211_if_free(local->mdev);
wiphy_free(local->hw.wiphy);
}
EXPORT_SYMBOL(ieee80211_free_hw);
static int __init ieee80211_init(void)
{
struct sk_buff *skb;
int ret;
BUILD_BUG_ON(sizeof(struct ieee80211_tx_packet_data) > sizeof(skb->cb));
#ifdef CONFIG_MAC80211_RCSIMPLE
ret = ieee80211_rate_control_register(&mac80211_rcsimple);
if (ret)
return ret;
#endif
ret = ieee80211_wme_register();
if (ret) {
#ifdef CONFIG_MAC80211_RCSIMPLE
ieee80211_rate_control_unregister(&mac80211_rcsimple);
#endif
printk(KERN_DEBUG "ieee80211_init: failed to "
"initialize WME (err=%d)\n", ret);
return ret;
}
ieee80211_debugfs_netdev_init();
ieee80211_regdomain_init();
return 0;
}
static void __exit ieee80211_exit(void)
{
#ifdef CONFIG_MAC80211_RCSIMPLE
ieee80211_rate_control_unregister(&mac80211_rcsimple);
#endif
ieee80211_wme_unregister();
ieee80211_debugfs_netdev_exit();
}
subsys_initcall(ieee80211_init);
module_exit(ieee80211_exit);
MODULE_DESCRIPTION("IEEE 802.11 subsystem");
MODULE_LICENSE("GPL");