linux/arch/sparc64/kernel/irq.c

1147 lines
27 KiB
C
Raw Normal View History

/* $Id: irq.c,v 1.114 2002/01/11 08:45:38 davem Exp $
* irq.c: UltraSparc IRQ handling/init/registry.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/kernel_stat.h>
#include <linux/signal.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/bootmem.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/atomic.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/sbus.h>
#include <asm/iommu.h>
#include <asm/upa.h>
#include <asm/oplib.h>
#include <asm/timer.h>
#include <asm/smp.h>
#include <asm/starfire.h>
#include <asm/uaccess.h>
#include <asm/cache.h>
#include <asm/cpudata.h>
#include <asm/auxio.h>
#include <asm/head.h>
#ifdef CONFIG_SMP
static void distribute_irqs(void);
#endif
/* UPA nodes send interrupt packet to UltraSparc with first data reg
* value low 5 (7 on Starfire) bits holding the IRQ identifier being
* delivered. We must translate this into a non-vector IRQ so we can
* set the softint on this cpu.
*
* To make processing these packets efficient and race free we use
* an array of irq buckets below. The interrupt vector handler in
* entry.S feeds incoming packets into per-cpu pil-indexed lists.
* The IVEC handler does not need to act atomically, the PIL dispatch
* code uses CAS to get an atomic snapshot of the list and clear it
* at the same time.
*/
struct ino_bucket ivector_table[NUM_IVECS] __attribute__ ((aligned (SMP_CACHE_BYTES)));
/* This has to be in the main kernel image, it cannot be
* turned into per-cpu data. The reason is that the main
* kernel image is locked into the TLB and this structure
* is accessed from the vectored interrupt trap handler. If
* access to this structure takes a TLB miss it could cause
* the 5-level sparc v9 trap stack to overflow.
*/
#define irq_work(__cpu) &(trap_block[(__cpu)].irq_worklist)
static struct irqaction *irq_action[NR_IRQS+1];
/* This only synchronizes entities which modify IRQ handler
* state and some selected user-level spots that want to
* read things in the table. IRQ handler processing orders
* its' accesses such that no locking is needed.
*/
static DEFINE_SPINLOCK(irq_action_lock);
static void register_irq_proc (unsigned int irq);
/*
* Upper 2b of irqaction->flags holds the ino.
* irqaction->mask holds the smp affinity information.
*/
#define put_ino_in_irqaction(action, irq) \
action->flags &= 0xffffffffffffUL; \
action->flags |= __irq_ino(irq) << 48;
#define get_ino_in_irqaction(action) (action->flags >> 48)
#define put_smpaff_in_irqaction(action, smpaff) (action)->mask = (smpaff)
#define get_smpaff_in_irqaction(action) ((action)->mask)
int show_interrupts(struct seq_file *p, void *v)
{
unsigned long flags;
int i = *(loff_t *) v;
struct irqaction *action;
#ifdef CONFIG_SMP
int j;
#endif
spin_lock_irqsave(&irq_action_lock, flags);
if (i <= NR_IRQS) {
if (!(action = *(i + irq_action)))
goto out_unlock;
seq_printf(p, "%3d: ", i);
#ifndef CONFIG_SMP
seq_printf(p, "%10u ", kstat_irqs(i));
#else
for_each_online_cpu(j) {
seq_printf(p, "%10u ",
kstat_cpu(j).irqs[i]);
}
#endif
seq_printf(p, " %s:%lx", action->name,
get_ino_in_irqaction(action));
for (action = action->next; action; action = action->next) {
seq_printf(p, ", %s:%lx", action->name,
get_ino_in_irqaction(action));
}
seq_putc(p, '\n');
}
out_unlock:
spin_unlock_irqrestore(&irq_action_lock, flags);
return 0;
}
extern unsigned long real_hard_smp_processor_id(void);
static unsigned int sun4u_compute_tid(unsigned long imap, unsigned long cpuid)
{
unsigned int tid;
if (this_is_starfire) {
tid = starfire_translate(imap, cpuid);
tid <<= IMAP_TID_SHIFT;
tid &= IMAP_TID_UPA;
} else {
if (tlb_type == cheetah || tlb_type == cheetah_plus) {
unsigned long ver;
__asm__ ("rdpr %%ver, %0" : "=r" (ver));
if ((ver >> 32UL) == __JALAPENO_ID ||
(ver >> 32UL) == __SERRANO_ID) {
tid = cpuid << IMAP_TID_SHIFT;
tid &= IMAP_TID_JBUS;
} else {
unsigned int a = cpuid & 0x1f;
unsigned int n = (cpuid >> 5) & 0x1f;
tid = ((a << IMAP_AID_SHIFT) |
(n << IMAP_NID_SHIFT));
tid &= (IMAP_AID_SAFARI |
IMAP_NID_SAFARI);;
}
} else {
tid = cpuid << IMAP_TID_SHIFT;
tid &= IMAP_TID_UPA;
}
}
return tid;
}
/* Now these are always passed a true fully specified sun4u INO. */
void enable_irq(unsigned int irq)
{
struct ino_bucket *bucket = __bucket(irq);
unsigned long imap, cpuid;
imap = bucket->imap;
if (imap == 0UL)
return;
preempt_disable();
/* This gets the physical processor ID, even on uniprocessor,
* so we can always program the interrupt target correctly.
*/
cpuid = real_hard_smp_processor_id();
if (tlb_type == hypervisor) {
unsigned int ino = __irq_ino(irq);
int err;
err = sun4v_intr_settarget(ino, cpuid);
if (err != HV_EOK)
printk("sun4v_intr_settarget(%x,%lu): err(%d)\n",
ino, cpuid, err);
err = sun4v_intr_setenabled(ino, HV_INTR_ENABLED);
if (err != HV_EOK)
printk("sun4v_intr_setenabled(%x): err(%d)\n",
ino, err);
} else {
unsigned int tid = sun4u_compute_tid(imap, cpuid);
/* NOTE NOTE NOTE, IGN and INO are read-only, IGN is a product
* of this SYSIO's preconfigured IGN in the SYSIO Control
* Register, the hardware just mirrors that value here.
* However for Graphics and UPA Slave devices the full
* IMAP_INR field can be set by the programmer here.
*
* Things like FFB can now be handled via the new IRQ
* mechanism.
*/
upa_writel(tid | IMAP_VALID, imap);
}
preempt_enable();
}
/* This now gets passed true ino's as well. */
void disable_irq(unsigned int irq)
{
struct ino_bucket *bucket = __bucket(irq);
unsigned long imap;
imap = bucket->imap;
if (imap != 0UL) {
if (tlb_type == hypervisor) {
unsigned int ino = __irq_ino(irq);
int err;
err = sun4v_intr_setenabled(ino, HV_INTR_DISABLED);
if (err != HV_EOK)
printk("sun4v_intr_setenabled(%x): "
"err(%d)\n", ino, err);
} else {
u32 tmp;
/* NOTE: We do not want to futz with the IRQ clear registers
* and move the state to IDLE, the SCSI code does call
* disable_irq() to assure atomicity in the queue cmd
* SCSI adapter driver code. Thus we'd lose interrupts.
*/
tmp = upa_readl(imap);
tmp &= ~IMAP_VALID;
upa_writel(tmp, imap);
}
}
}
static void build_irq_error(const char *msg, unsigned int ino, int pil, int inofixup,
unsigned long iclr, unsigned long imap,
struct ino_bucket *bucket)
{
prom_printf("IRQ: INO %04x (%d:%016lx:%016lx) --> "
"(%d:%d:%016lx:%016lx), halting...\n",
ino, bucket->pil, bucket->iclr, bucket->imap,
pil, inofixup, iclr, imap);
prom_halt();
}
unsigned int build_irq(int pil, int inofixup, unsigned long iclr, unsigned long imap)
{
struct ino_bucket *bucket;
int ino;
BUG_ON(pil == 0);
BUG_ON(tlb_type == hypervisor);
/* RULE: Both must be specified in all other cases. */
if (iclr == 0UL || imap == 0UL) {
prom_printf("Invalid build_irq %d %d %016lx %016lx\n",
pil, inofixup, iclr, imap);
prom_halt();
}
ino = (upa_readl(imap) & (IMAP_IGN | IMAP_INO)) + inofixup;
if (ino > NUM_IVECS) {
prom_printf("Invalid INO %04x (%d:%d:%016lx:%016lx)\n",
ino, pil, inofixup, iclr, imap);
prom_halt();
}
bucket = &ivector_table[ino];
if (bucket->flags & IBF_ACTIVE)
build_irq_error("IRQ: Trying to build active INO bucket.\n",
ino, pil, inofixup, iclr, imap, bucket);
if (bucket->irq_info) {
if (bucket->imap != imap || bucket->iclr != iclr)
build_irq_error("IRQ: Trying to reinit INO bucket.\n",
ino, pil, inofixup, iclr, imap, bucket);
goto out;
}
bucket->irq_info = kzalloc(sizeof(struct irq_desc), GFP_ATOMIC);
if (!bucket->irq_info) {
prom_printf("IRQ: Error, kmalloc(irq_desc) failed.\n");
prom_halt();
}
/* Ok, looks good, set it up. Don't touch the irq_chain or
* the pending flag.
*/
bucket->imap = imap;
bucket->iclr = iclr;
bucket->pil = pil;
bucket->flags = 0;
out:
return __irq(bucket);
}
unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino, int pil, unsigned char flags)
{
struct ino_bucket *bucket;
unsigned long sysino;
sysino = sun4v_devino_to_sysino(devhandle, devino);
bucket = &ivector_table[sysino];
/* Catch accidental accesses to these things. IMAP/ICLR handling
* is done by hypervisor calls on sun4v platforms, not by direct
* register accesses.
*
* But we need to make them look unique for the disable_irq() logic
* in free_irq().
*/
bucket->imap = ~0UL - sysino;
bucket->iclr = ~0UL - sysino;
bucket->pil = pil;
bucket->flags = flags;
bucket->irq_info = kzalloc(sizeof(struct irq_desc), GFP_ATOMIC);
if (!bucket->irq_info) {
prom_printf("IRQ: Error, kmalloc(irq_desc) failed.\n");
prom_halt();
}
return __irq(bucket);
}
static void atomic_bucket_insert(struct ino_bucket *bucket)
{
unsigned long pstate;
unsigned int *ent;
__asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
__asm__ __volatile__("wrpr %0, %1, %%pstate"
: : "r" (pstate), "i" (PSTATE_IE));
ent = irq_work(smp_processor_id());
bucket->irq_chain = *ent;
*ent = __irq(bucket);
__asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate));
}
static int check_irq_sharing(int pil, unsigned long irqflags)
{
struct irqaction *action, *tmp;
action = *(irq_action + pil);
if (action) {
if ((action->flags & SA_SHIRQ) && (irqflags & SA_SHIRQ)) {
for (tmp = action; tmp->next; tmp = tmp->next)
;
} else {
return -EBUSY;
}
}
return 0;
}
static void append_irq_action(int pil, struct irqaction *action)
{
struct irqaction **pp = irq_action + pil;
while (*pp)
pp = &((*pp)->next);
*pp = action;
}
static struct irqaction *get_action_slot(struct ino_bucket *bucket)
{
struct irq_desc *desc = bucket->irq_info;
int max_irq, i;
max_irq = 1;
if (bucket->flags & IBF_PCI)
max_irq = MAX_IRQ_DESC_ACTION;
for (i = 0; i < max_irq; i++) {
struct irqaction *p = &desc->action[i];
u32 mask = (1 << i);
if (desc->action_active_mask & mask)
continue;
desc->action_active_mask |= mask;
return p;
}
return NULL;
}
int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *),
unsigned long irqflags, const char *name, void *dev_id)
{
struct irqaction *action;
struct ino_bucket *bucket = __bucket(irq);
unsigned long flags;
int pending = 0;
if (unlikely(!handler))
return -EINVAL;
if (unlikely(!bucket->irq_info))
return -ENODEV;
if (irqflags & SA_SAMPLE_RANDOM) {
/*
* This function might sleep, we want to call it first,
* outside of the atomic block. In SA_STATIC_ALLOC case,
* random driver's kmalloc will fail, but it is safe.
* If already initialized, random driver will not reinit.
* Yes, this might clear the entropy pool if the wrong
* driver is attempted to be loaded, without actually
* installing a new handler, but is this really a problem,
* only the sysadmin is able to do this.
*/
rand_initialize_irq(irq);
}
spin_lock_irqsave(&irq_action_lock, flags);
if (check_irq_sharing(bucket->pil, irqflags)) {
spin_unlock_irqrestore(&irq_action_lock, flags);
return -EBUSY;
}
action = get_action_slot(bucket);
if (!action) {
spin_unlock_irqrestore(&irq_action_lock, flags);
return -ENOMEM;
}
bucket->flags |= IBF_ACTIVE;
pending = bucket->pending;
if (pending)
bucket->pending = 0;
action->handler = handler;
action->flags = irqflags;
action->name = name;
action->next = NULL;
action->dev_id = dev_id;
put_ino_in_irqaction(action, irq);
put_smpaff_in_irqaction(action, CPU_MASK_NONE);
append_irq_action(bucket->pil, action);
enable_irq(irq);
/* We ate the IVEC already, this makes sure it does not get lost. */
if (pending) {
atomic_bucket_insert(bucket);
set_softint(1 << PIL_DEVICE_IRQ);
}
spin_unlock_irqrestore(&irq_action_lock, flags);
register_irq_proc(__irq_ino(irq));
#ifdef CONFIG_SMP
distribute_irqs();
#endif
return 0;
}
EXPORT_SYMBOL(request_irq);
static struct irqaction *unlink_irq_action(unsigned int irq, void *dev_id)
{
struct ino_bucket *bucket = __bucket(irq);
struct irqaction *action, **pp;
pp = irq_action + bucket->pil;
action = *pp;
if (unlikely(!action))
return NULL;
if (unlikely(!action->handler)) {
printk("Freeing free IRQ %d\n", bucket->pil);
return NULL;
}
while (action && action->dev_id != dev_id) {
pp = &action->next;
action = *pp;
}
if (likely(action))
*pp = action->next;
return action;
}
void free_irq(unsigned int irq, void *dev_id)
{
struct irqaction *action;
struct ino_bucket *bucket;
struct irq_desc *desc;
unsigned long flags;
int ent, i;
spin_lock_irqsave(&irq_action_lock, flags);
action = unlink_irq_action(irq, dev_id);
spin_unlock_irqrestore(&irq_action_lock, flags);
if (unlikely(!action))
return;
synchronize_irq(irq);
spin_lock_irqsave(&irq_action_lock, flags);
bucket = __bucket(irq);
desc = bucket->irq_info;
for (i = 0; i < MAX_IRQ_DESC_ACTION; i++) {
struct irqaction *p = &desc->action[i];
if (p == action) {
desc->action_active_mask &= ~(1 << i);
break;
}
}
if (!desc->action_active_mask) {
unsigned long imap = bucket->imap;
/* This unique interrupt source is now inactive. */
bucket->flags &= ~IBF_ACTIVE;
/* See if any other buckets share this bucket's IMAP
* and are still active.
*/
for (ent = 0; ent < NUM_IVECS; ent++) {
struct ino_bucket *bp = &ivector_table[ent];
if (bp != bucket &&
bp->imap == imap &&
(bp->flags & IBF_ACTIVE) != 0)
break;
}
/* Only disable when no other sub-irq levels of
* the same IMAP are active.
*/
if (ent == NUM_IVECS)
disable_irq(irq);
}
spin_unlock_irqrestore(&irq_action_lock, flags);
}
EXPORT_SYMBOL(free_irq);
#ifdef CONFIG_SMP
void synchronize_irq(unsigned int irq)
{
struct ino_bucket *bucket = __bucket(irq);
#if 0
/* The following is how I wish I could implement this.
* Unfortunately the ICLR registers are read-only, you can
* only write ICLR_foo values to them. To get the current
* IRQ status you would need to get at the IRQ diag registers
* in the PCI/SBUS controller and the layout of those vary
* from one controller to the next, sigh... -DaveM
*/
unsigned long iclr = bucket->iclr;
while (1) {
u32 tmp = upa_readl(iclr);
if (tmp == ICLR_TRANSMIT ||
tmp == ICLR_PENDING) {
cpu_relax();
continue;
}
break;
}
#else
/* So we have to do this with a INPROGRESS bit just like x86. */
while (bucket->flags & IBF_INPROGRESS)
cpu_relax();
#endif
}
#endif /* CONFIG_SMP */
static void process_bucket(struct ino_bucket *bp, struct pt_regs *regs)
{
struct irq_desc *desc = bp->irq_info;
unsigned char flags = bp->flags;
u32 action_mask, i;
int random;
bp->flags |= IBF_INPROGRESS;
if (unlikely(!(flags & IBF_ACTIVE))) {
bp->pending = 1;
goto out;
}
if (desc->pre_handler)
desc->pre_handler(bp,
desc->pre_handler_arg1,
desc->pre_handler_arg2);
action_mask = desc->action_active_mask;
random = 0;
for (i = 0; i < MAX_IRQ_DESC_ACTION; i++) {
struct irqaction *p = &desc->action[i];
u32 mask = (1 << i);
if (!(action_mask & mask))
continue;
action_mask &= ~mask;
if (p->handler(__irq(bp), p->dev_id, regs) == IRQ_HANDLED)
random |= p->flags;
if (!action_mask)
break;
}
if (tlb_type == hypervisor) {
unsigned int ino = __irq_ino(bp);
int err;
err = sun4v_intr_setstate(ino, HV_INTR_STATE_IDLE);
if (err != HV_EOK)
printk("sun4v_intr_setstate(%x): "
"err(%d)\n", ino, err);
} else {
upa_writel(ICLR_IDLE, bp->iclr);
}
/* Test and add entropy */
if (random & SA_SAMPLE_RANDOM)
add_interrupt_randomness(bp->pil);
out:
bp->flags &= ~IBF_INPROGRESS;
}
#ifndef CONFIG_SMP
extern irqreturn_t timer_interrupt(int, void *, struct pt_regs *);
void timer_irq(int irq, struct pt_regs *regs)
{
unsigned long clr_mask = 1 << irq;
unsigned long tick_mask = tick_ops->softint_mask;
if (get_softint() & tick_mask) {
irq = 0;
clr_mask = tick_mask;
}
clear_softint(clr_mask);
irq_enter();
kstat_this_cpu.irqs[irq]++;
timer_interrupt(irq, NULL, regs);
irq_exit();
}
#endif
void handler_irq(int irq, struct pt_regs *regs)
{
struct ino_bucket *bp;
int cpu = smp_processor_id();
/* XXX at this point we should be able to assert that
* XXX irq is PIL_DEVICE_IRQ...
*/
clear_softint(1 << irq);
irq_enter();
/* Sliiiick... */
bp = __bucket(xchg32(irq_work(cpu), 0));
while (bp) {
struct ino_bucket *nbp = __bucket(bp->irq_chain);
kstat_this_cpu.irqs[bp->pil]++;
bp->irq_chain = 0;
process_bucket(bp, regs);
bp = nbp;
}
irq_exit();
}
#ifdef CONFIG_BLK_DEV_FD
extern irqreturn_t floppy_interrupt(int, void *, struct pt_regs *);
/* XXX No easy way to include asm/floppy.h XXX */
extern unsigned char *pdma_vaddr;
extern unsigned long pdma_size;
extern volatile int doing_pdma;
extern unsigned long fdc_status;
irqreturn_t sparc_floppy_irq(int irq, void *dev_cookie, struct pt_regs *regs)
{
if (likely(doing_pdma)) {
void __iomem *stat = (void __iomem *) fdc_status;
unsigned char *vaddr = pdma_vaddr;
unsigned long size = pdma_size;
u8 val;
while (size) {
val = readb(stat);
if (unlikely(!(val & 0x80))) {
pdma_vaddr = vaddr;
pdma_size = size;
return IRQ_HANDLED;
}
if (unlikely(!(val & 0x20))) {
pdma_vaddr = vaddr;
pdma_size = size;
doing_pdma = 0;
goto main_interrupt;
}
if (val & 0x40) {
/* read */
*vaddr++ = readb(stat + 1);
} else {
unsigned char data = *vaddr++;
/* write */
writeb(data, stat + 1);
}
size--;
}
pdma_vaddr = vaddr;
pdma_size = size;
/* Send Terminal Count pulse to floppy controller. */
val = readb(auxio_register);
val |= AUXIO_AUX1_FTCNT;
writeb(val, auxio_register);
val &= ~AUXIO_AUX1_FTCNT;
writeb(val, auxio_register);
doing_pdma = 0;
}
main_interrupt:
return floppy_interrupt(irq, dev_cookie, regs);
}
EXPORT_SYMBOL(sparc_floppy_irq);
#endif
/* We really don't need these at all on the Sparc. We only have
* stubs here because they are exported to modules.
*/
unsigned long probe_irq_on(void)
{
return 0;
}
EXPORT_SYMBOL(probe_irq_on);
int probe_irq_off(unsigned long mask)
{
return 0;
}
EXPORT_SYMBOL(probe_irq_off);
#ifdef CONFIG_SMP
static int retarget_one_irq(struct irqaction *p, int goal_cpu)
{
struct ino_bucket *bucket = get_ino_in_irqaction(p) + ivector_table;
while (!cpu_online(goal_cpu)) {
if (++goal_cpu >= NR_CPUS)
goal_cpu = 0;
}
if (tlb_type == hypervisor) {
unsigned int ino = __irq_ino(bucket);
sun4v_intr_settarget(ino, goal_cpu);
sun4v_intr_setenabled(ino, HV_INTR_ENABLED);
} else {
unsigned long imap = bucket->imap;
unsigned int tid = sun4u_compute_tid(imap, goal_cpu);
upa_writel(tid | IMAP_VALID, imap);
}
do {
if (++goal_cpu >= NR_CPUS)
goal_cpu = 0;
} while (!cpu_online(goal_cpu));
return goal_cpu;
}
/* Called from request_irq. */
static void distribute_irqs(void)
{
unsigned long flags;
int cpu, level;
spin_lock_irqsave(&irq_action_lock, flags);
cpu = 0;
/*
* Skip the timer at [0], and very rare error/power intrs at [15].
* Also level [12], it causes problems on Ex000 systems.
*/
for (level = 1; level < NR_IRQS; level++) {
struct irqaction *p = irq_action[level];
if (level == 12)
continue;
while(p) {
cpu = retarget_one_irq(p, cpu);
p = p->next;
}
}
spin_unlock_irqrestore(&irq_action_lock, flags);
}
#endif
struct sun5_timer {
u64 count0;
u64 limit0;
u64 count1;
u64 limit1;
};
static struct sun5_timer *prom_timers;
static u64 prom_limit0, prom_limit1;
static void map_prom_timers(void)
{
unsigned int addr[3];
int tnode, err;
/* PROM timer node hangs out in the top level of device siblings... */
tnode = prom_finddevice("/counter-timer");
/* Assume if node is not present, PROM uses different tick mechanism
* which we should not care about.
*/
if (tnode == 0 || tnode == -1) {
prom_timers = (struct sun5_timer *) 0;
return;
}
/* If PROM is really using this, it must be mapped by him. */
err = prom_getproperty(tnode, "address", (char *)addr, sizeof(addr));
if (err == -1) {
prom_printf("PROM does not have timer mapped, trying to continue.\n");
prom_timers = (struct sun5_timer *) 0;
return;
}
prom_timers = (struct sun5_timer *) ((unsigned long)addr[0]);
}
static void kill_prom_timer(void)
{
if (!prom_timers)
return;
/* Save them away for later. */
prom_limit0 = prom_timers->limit0;
prom_limit1 = prom_timers->limit1;
/* Just as in sun4c/sun4m PROM uses timer which ticks at IRQ 14.
* We turn both off here just to be paranoid.
*/
prom_timers->limit0 = 0;
prom_timers->limit1 = 0;
/* Wheee, eat the interrupt packet too... */
__asm__ __volatile__(
" mov 0x40, %%g2\n"
" ldxa [%%g0] %0, %%g1\n"
" ldxa [%%g2] %1, %%g1\n"
" stxa %%g0, [%%g0] %0\n"
" membar #Sync\n"
: /* no outputs */
: "i" (ASI_INTR_RECEIVE), "i" (ASI_INTR_R)
: "g1", "g2");
}
void init_irqwork_curcpu(void)
{
int cpu = hard_smp_processor_id();
trap_block[cpu].irq_worklist = 0;
}
static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type)
{
unsigned long num_entries = 128;
unsigned long status;
status = sun4v_cpu_qconf(type, paddr, num_entries);
if (status != HV_EOK) {
prom_printf("SUN4V: sun4v_cpu_qconf(%lu:%lx:%lu) failed, "
"err %lu\n", type, paddr, num_entries, status);
prom_halt();
}
}
static void __cpuinit sun4v_register_mondo_queues(int this_cpu)
{
struct trap_per_cpu *tb = &trap_block[this_cpu];
register_one_mondo(tb->cpu_mondo_pa, HV_CPU_QUEUE_CPU_MONDO);
register_one_mondo(tb->dev_mondo_pa, HV_CPU_QUEUE_DEVICE_MONDO);
register_one_mondo(tb->resum_mondo_pa, HV_CPU_QUEUE_RES_ERROR);
register_one_mondo(tb->nonresum_mondo_pa, HV_CPU_QUEUE_NONRES_ERROR);
}
static void __cpuinit alloc_one_mondo(unsigned long *pa_ptr, int use_bootmem)
{
void *page;
if (use_bootmem)
page = alloc_bootmem_low_pages(PAGE_SIZE);
else
page = (void *) get_zeroed_page(GFP_ATOMIC);
if (!page) {
prom_printf("SUN4V: Error, cannot allocate mondo queue.\n");
prom_halt();
}
*pa_ptr = __pa(page);
}
static void __cpuinit alloc_one_kbuf(unsigned long *pa_ptr, int use_bootmem)
{
void *page;
if (use_bootmem)
page = alloc_bootmem_low_pages(PAGE_SIZE);
else
page = (void *) get_zeroed_page(GFP_ATOMIC);
if (!page) {
prom_printf("SUN4V: Error, cannot allocate kbuf page.\n");
prom_halt();
}
*pa_ptr = __pa(page);
}
static void __cpuinit init_cpu_send_mondo_info(struct trap_per_cpu *tb, int use_bootmem)
{
#ifdef CONFIG_SMP
void *page;
BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64));
if (use_bootmem)
page = alloc_bootmem_low_pages(PAGE_SIZE);
else
page = (void *) get_zeroed_page(GFP_ATOMIC);
if (!page) {
prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n");
prom_halt();
}
tb->cpu_mondo_block_pa = __pa(page);
tb->cpu_list_pa = __pa(page + 64);
#endif
}
/* Allocate and register the mondo and error queues for this cpu. */
[SPARC64]: Get SUN4V SMP working. The sibling cpu bringup is extremely fragile. We can only perform the most basic calls until we take over the trap table from the firmware/hypervisor on the new cpu. This means no accesses to %g4, %g5, %g6 since those can't be TLB translated without our trap handlers. In order to achieve this: 1) Change sun4v_init_mondo_queues() so that it can operate in several modes. It can allocate the queues, or install them in the current processor, or both. The boot cpu does both in it's call early on. Later, the boot cpu allocates the sibling cpu queue, starts the sibling cpu, then the sibling cpu loads them in. 2) init_cur_cpu_trap() is changed to take the current_thread_info() as an argument instead of reading %g6 directly on the current cpu. 3) Create a trampoline stack for the sibling cpus. We do our basic kernel calls using this stack, which is locked into the kernel image, then go to our proper thread stack after taking over the trap table. 4) While we are in this delicate startup state, we put 0xdeadbeef into %g4/%g5/%g6 in order to catch accidental accesses. 5) On the final prom_set_trap_table*() call, we put &init_thread_union into %g6. This is a hack to make prom_world(0) work. All that wants to do is restore the %asi register using get_thread_current_ds(). Longer term we should just do the OBP calls to set the trap table by hand just like we do for everything else. This would avoid that silly prom_world(0) issue, then we can remove the init_thread_union hack. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-17 09:29:17 +00:00
void __cpuinit sun4v_init_mondo_queues(int use_bootmem, int cpu, int alloc, int load)
{
struct trap_per_cpu *tb = &trap_block[cpu];
[SPARC64]: Get SUN4V SMP working. The sibling cpu bringup is extremely fragile. We can only perform the most basic calls until we take over the trap table from the firmware/hypervisor on the new cpu. This means no accesses to %g4, %g5, %g6 since those can't be TLB translated without our trap handlers. In order to achieve this: 1) Change sun4v_init_mondo_queues() so that it can operate in several modes. It can allocate the queues, or install them in the current processor, or both. The boot cpu does both in it's call early on. Later, the boot cpu allocates the sibling cpu queue, starts the sibling cpu, then the sibling cpu loads them in. 2) init_cur_cpu_trap() is changed to take the current_thread_info() as an argument instead of reading %g6 directly on the current cpu. 3) Create a trampoline stack for the sibling cpus. We do our basic kernel calls using this stack, which is locked into the kernel image, then go to our proper thread stack after taking over the trap table. 4) While we are in this delicate startup state, we put 0xdeadbeef into %g4/%g5/%g6 in order to catch accidental accesses. 5) On the final prom_set_trap_table*() call, we put &init_thread_union into %g6. This is a hack to make prom_world(0) work. All that wants to do is restore the %asi register using get_thread_current_ds(). Longer term we should just do the OBP calls to set the trap table by hand just like we do for everything else. This would avoid that silly prom_world(0) issue, then we can remove the init_thread_union hack. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-17 09:29:17 +00:00
if (alloc) {
alloc_one_mondo(&tb->cpu_mondo_pa, use_bootmem);
alloc_one_mondo(&tb->dev_mondo_pa, use_bootmem);
alloc_one_mondo(&tb->resum_mondo_pa, use_bootmem);
alloc_one_kbuf(&tb->resum_kernel_buf_pa, use_bootmem);
alloc_one_mondo(&tb->nonresum_mondo_pa, use_bootmem);
alloc_one_kbuf(&tb->nonresum_kernel_buf_pa, use_bootmem);
[SPARC64]: Get SUN4V SMP working. The sibling cpu bringup is extremely fragile. We can only perform the most basic calls until we take over the trap table from the firmware/hypervisor on the new cpu. This means no accesses to %g4, %g5, %g6 since those can't be TLB translated without our trap handlers. In order to achieve this: 1) Change sun4v_init_mondo_queues() so that it can operate in several modes. It can allocate the queues, or install them in the current processor, or both. The boot cpu does both in it's call early on. Later, the boot cpu allocates the sibling cpu queue, starts the sibling cpu, then the sibling cpu loads them in. 2) init_cur_cpu_trap() is changed to take the current_thread_info() as an argument instead of reading %g6 directly on the current cpu. 3) Create a trampoline stack for the sibling cpus. We do our basic kernel calls using this stack, which is locked into the kernel image, then go to our proper thread stack after taking over the trap table. 4) While we are in this delicate startup state, we put 0xdeadbeef into %g4/%g5/%g6 in order to catch accidental accesses. 5) On the final prom_set_trap_table*() call, we put &init_thread_union into %g6. This is a hack to make prom_world(0) work. All that wants to do is restore the %asi register using get_thread_current_ds(). Longer term we should just do the OBP calls to set the trap table by hand just like we do for everything else. This would avoid that silly prom_world(0) issue, then we can remove the init_thread_union hack. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-17 09:29:17 +00:00
init_cpu_send_mondo_info(tb, use_bootmem);
}
[SPARC64]: Get SUN4V SMP working. The sibling cpu bringup is extremely fragile. We can only perform the most basic calls until we take over the trap table from the firmware/hypervisor on the new cpu. This means no accesses to %g4, %g5, %g6 since those can't be TLB translated without our trap handlers. In order to achieve this: 1) Change sun4v_init_mondo_queues() so that it can operate in several modes. It can allocate the queues, or install them in the current processor, or both. The boot cpu does both in it's call early on. Later, the boot cpu allocates the sibling cpu queue, starts the sibling cpu, then the sibling cpu loads them in. 2) init_cur_cpu_trap() is changed to take the current_thread_info() as an argument instead of reading %g6 directly on the current cpu. 3) Create a trampoline stack for the sibling cpus. We do our basic kernel calls using this stack, which is locked into the kernel image, then go to our proper thread stack after taking over the trap table. 4) While we are in this delicate startup state, we put 0xdeadbeef into %g4/%g5/%g6 in order to catch accidental accesses. 5) On the final prom_set_trap_table*() call, we put &init_thread_union into %g6. This is a hack to make prom_world(0) work. All that wants to do is restore the %asi register using get_thread_current_ds(). Longer term we should just do the OBP calls to set the trap table by hand just like we do for everything else. This would avoid that silly prom_world(0) issue, then we can remove the init_thread_union hack. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-17 09:29:17 +00:00
if (load) {
if (cpu != hard_smp_processor_id()) {
prom_printf("SUN4V: init mondo on cpu %d not %d\n",
cpu, hard_smp_processor_id());
prom_halt();
}
sun4v_register_mondo_queues(cpu);
}
}
/* Only invoked on boot processor. */
void __init init_IRQ(void)
{
map_prom_timers();
kill_prom_timer();
memset(&ivector_table[0], 0, sizeof(ivector_table));
if (tlb_type == hypervisor)
[SPARC64]: Get SUN4V SMP working. The sibling cpu bringup is extremely fragile. We can only perform the most basic calls until we take over the trap table from the firmware/hypervisor on the new cpu. This means no accesses to %g4, %g5, %g6 since those can't be TLB translated without our trap handlers. In order to achieve this: 1) Change sun4v_init_mondo_queues() so that it can operate in several modes. It can allocate the queues, or install them in the current processor, or both. The boot cpu does both in it's call early on. Later, the boot cpu allocates the sibling cpu queue, starts the sibling cpu, then the sibling cpu loads them in. 2) init_cur_cpu_trap() is changed to take the current_thread_info() as an argument instead of reading %g6 directly on the current cpu. 3) Create a trampoline stack for the sibling cpus. We do our basic kernel calls using this stack, which is locked into the kernel image, then go to our proper thread stack after taking over the trap table. 4) While we are in this delicate startup state, we put 0xdeadbeef into %g4/%g5/%g6 in order to catch accidental accesses. 5) On the final prom_set_trap_table*() call, we put &init_thread_union into %g6. This is a hack to make prom_world(0) work. All that wants to do is restore the %asi register using get_thread_current_ds(). Longer term we should just do the OBP calls to set the trap table by hand just like we do for everything else. This would avoid that silly prom_world(0) issue, then we can remove the init_thread_union hack. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-17 09:29:17 +00:00
sun4v_init_mondo_queues(1, hard_smp_processor_id(), 1, 1);
/* We need to clear any IRQ's pending in the soft interrupt
* registers, a spurious one could be left around from the
* PROM timer which we just disabled.
*/
clear_softint(get_softint());
/* Now that ivector table is initialized, it is safe
* to receive IRQ vector traps. We will normally take
* one or two right now, in case some device PROM used
* to boot us wants to speak to us. We just ignore them.
*/
__asm__ __volatile__("rdpr %%pstate, %%g1\n\t"
"or %%g1, %0, %%g1\n\t"
"wrpr %%g1, 0x0, %%pstate"
: /* No outputs */
: "i" (PSTATE_IE)
: "g1");
}
static struct proc_dir_entry * root_irq_dir;
static struct proc_dir_entry * irq_dir [NUM_IVECS];
#ifdef CONFIG_SMP
static int irq_affinity_read_proc (char *page, char **start, off_t off,
int count, int *eof, void *data)
{
struct ino_bucket *bp = ivector_table + (long)data;
struct irq_desc *desc = bp->irq_info;
struct irqaction *ap = desc->action;
cpumask_t mask;
int len;
mask = get_smpaff_in_irqaction(ap);
if (cpus_empty(mask))
mask = cpu_online_map;
len = cpumask_scnprintf(page, count, mask);
if (count - len < 2)
return -EINVAL;
len += sprintf(page + len, "\n");
return len;
}
static inline void set_intr_affinity(int irq, cpumask_t hw_aff)
{
struct ino_bucket *bp = ivector_table + irq;
struct irq_desc *desc = bp->irq_info;
struct irqaction *ap = desc->action;
/* Users specify affinity in terms of hw cpu ids.
* As soon as we do this, handler_irq() might see and take action.
*/
put_smpaff_in_irqaction(ap, hw_aff);
/* Migration is simply done by the next cpu to service this
* interrupt.
*/
}
static int irq_affinity_write_proc (struct file *file, const char __user *buffer,
unsigned long count, void *data)
{
int irq = (long) data, full_count = count, err;
cpumask_t new_value;
err = cpumask_parse(buffer, count, new_value);
/*
* Do not allow disabling IRQs completely - it's a too easy
* way to make the system unusable accidentally :-) At least
* one online CPU still has to be targeted.
*/
cpus_and(new_value, new_value, cpu_online_map);
if (cpus_empty(new_value))
return -EINVAL;
set_intr_affinity(irq, new_value);
return full_count;
}
#endif
#define MAX_NAMELEN 10
static void register_irq_proc (unsigned int irq)
{
char name [MAX_NAMELEN];
if (!root_irq_dir || irq_dir[irq])
return;
memset(name, 0, MAX_NAMELEN);
sprintf(name, "%x", irq);
/* create /proc/irq/1234 */
irq_dir[irq] = proc_mkdir(name, root_irq_dir);
#ifdef CONFIG_SMP
/* XXX SMP affinity not supported on starfire yet. */
if (this_is_starfire == 0) {
struct proc_dir_entry *entry;
/* create /proc/irq/1234/smp_affinity */
entry = create_proc_entry("smp_affinity", 0600, irq_dir[irq]);
if (entry) {
entry->nlink = 1;
entry->data = (void *)(long)irq;
entry->read_proc = irq_affinity_read_proc;
entry->write_proc = irq_affinity_write_proc;
}
}
#endif
}
void init_irq_proc (void)
{
/* create /proc/irq */
root_irq_dir = proc_mkdir("irq", NULL);
}