linux/include/asm-sparc/audioio.h

235 lines
7.6 KiB
C
Raw Normal View History

/*
* include/asm-sparc/audioio.h
*
* Sparc Audio Midlayer
* Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
*/
#ifndef _AUDIOIO_H_
#define _AUDIOIO_H_
/*
* SunOS/Solaris /dev/audio interface
*/
#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
#include <linux/types.h>
#include <linux/time.h>
#include <linux/ioctl.h>
#endif
/*
* This structure contains state information for audio device IO streams.
*/
typedef struct audio_prinfo {
/*
* The following values describe the audio data encoding.
*/
unsigned int sample_rate; /* samples per second */
unsigned int channels; /* number of interleaved channels */
unsigned int precision; /* bit-width of each sample */
unsigned int encoding; /* data encoding method */
/*
* The following values control audio device configuration
*/
unsigned int gain; /* gain level: 0 - 255 */
unsigned int port; /* selected I/O port (see below) */
unsigned int avail_ports; /* available I/O ports (see below) */
unsigned int _xxx[2]; /* Reserved for future use */
unsigned int buffer_size; /* I/O buffer size */
/*
* The following values describe driver state
*/
unsigned int samples; /* number of samples converted */
unsigned int eof; /* End Of File counter (play only) */
unsigned char pause; /* non-zero for pause, zero to resume */
unsigned char error; /* non-zero if overflow/underflow */
unsigned char waiting; /* non-zero if a process wants access */
unsigned char balance; /* stereo channel balance */
unsigned short minordev;
/*
* The following values are read-only state flags
*/
unsigned char open; /* non-zero if open access permitted */
unsigned char active; /* non-zero if I/O is active */
} audio_prinfo_t;
/*
* This structure describes the current state of the audio device.
*/
typedef struct audio_info {
/*
* Per-stream information
*/
audio_prinfo_t play; /* output status information */
audio_prinfo_t record; /* input status information */
/*
* Per-unit/channel information
*/
unsigned int monitor_gain; /* input to output mix: 0 - 255 */
unsigned char output_muted; /* non-zero if output is muted */
unsigned char _xxx[3]; /* Reserved for future use */
unsigned int _yyy[3]; /* Reserved for future use */
} audio_info_t;
/*
* Audio encoding types
*/
#define AUDIO_ENCODING_NONE (0) /* no encoding assigned */
#define AUDIO_ENCODING_ULAW (1) /* u-law encoding */
#define AUDIO_ENCODING_ALAW (2) /* A-law encoding */
#define AUDIO_ENCODING_LINEAR (3) /* Linear PCM encoding */
#define AUDIO_ENCODING_FLOAT (4) /* IEEE float (-1. <-> +1.) */
#define AUDIO_ENCODING_DVI (104) /* DVI ADPCM */
#define AUDIO_ENCODING_LINEAR8 (105) /* 8 bit UNSIGNED */
#define AUDIO_ENCODING_LINEARLE (106) /* Linear PCM LE encoding */
/*
* These ranges apply to record, play, and monitor gain values
*/
#define AUDIO_MIN_GAIN (0) /* minimum gain value */
#define AUDIO_MAX_GAIN (255) /* maximum gain value */
/*
* These values apply to the balance field to adjust channel gain values
*/
#define AUDIO_LEFT_BALANCE (0) /* left channel only */
#define AUDIO_MID_BALANCE (32) /* equal left/right channel */
#define AUDIO_RIGHT_BALANCE (64) /* right channel only */
#define AUDIO_BALANCE_SHIFT (3)
/*
* Generic minimum/maximum limits for number of channels, both modes
*/
#define AUDIO_MIN_PLAY_CHANNELS (1)
#define AUDIO_MAX_PLAY_CHANNELS (4)
#define AUDIO_MIN_REC_CHANNELS (1)
#define AUDIO_MAX_REC_CHANNELS (4)
/*
* Generic minimum/maximum limits for sample precision
*/
#define AUDIO_MIN_PLAY_PRECISION (8)
#define AUDIO_MAX_PLAY_PRECISION (32)
#define AUDIO_MIN_REC_PRECISION (8)
#define AUDIO_MAX_REC_PRECISION (32)
/*
* Define some convenient names for typical audio ports
*/
/*
* output ports (several may be enabled simultaneously)
*/
#define AUDIO_SPEAKER 0x01 /* output to built-in speaker */
#define AUDIO_HEADPHONE 0x02 /* output to headphone jack */
#define AUDIO_LINE_OUT 0x04 /* output to line out */
/*
* input ports (usually only one at a time)
*/
#define AUDIO_MICROPHONE 0x01 /* input from microphone */
#define AUDIO_LINE_IN 0x02 /* input from line in */
#define AUDIO_CD 0x04 /* input from on-board CD inputs */
#define AUDIO_INTERNAL_CD_IN AUDIO_CD /* input from internal CDROM */
#define AUDIO_ANALOG_LOOPBACK 0x40 /* input from output */
/*
* This macro initializes an audio_info structure to 'harmless' values.
* Note that (~0) might not be a harmless value for a flag that was
* a signed int.
*/
#define AUDIO_INITINFO(i) { \
unsigned int *__x__; \
for (__x__ = (unsigned int *)(i); \
(char *) __x__ < (((char *)(i)) + sizeof (audio_info_t)); \
*__x__++ = ~0); \
}
/*
* These allow testing for what the user wants to set
*/
#define AUD_INITVALUE (~0)
#define Modify(X) ((unsigned int)(X) != AUD_INITVALUE)
#define Modifys(X) ((X) != (unsigned short)AUD_INITVALUE)
#define Modifyc(X) ((X) != (unsigned char)AUD_INITVALUE)
/*
* Parameter for the AUDIO_GETDEV ioctl to determine current
* audio devices.
*/
#define MAX_AUDIO_DEV_LEN (16)
typedef struct audio_device {
char name[MAX_AUDIO_DEV_LEN];
char version[MAX_AUDIO_DEV_LEN];
char config[MAX_AUDIO_DEV_LEN];
} audio_device_t;
/*
* Ioctl calls for the audio device.
*/
/*
* AUDIO_GETINFO retrieves the current state of the audio device.
*
* AUDIO_SETINFO copies all fields of the audio_info structure whose
* values are not set to the initialized value (-1) to the device state.
* It performs an implicit AUDIO_GETINFO to return the new state of the
* device. Note that the record.samples and play.samples fields are set
* to the last value before the AUDIO_SETINFO took effect. This allows
* an application to reset the counters while atomically retrieving the
* last value.
*
* AUDIO_DRAIN suspends the calling process until the write buffers are
* empty.
*
* AUDIO_GETDEV returns a structure of type audio_device_t which contains
* three strings. The string "name" is a short identifying string (for
* example, the SBus Fcode name string), the string "version" identifies
* the current version of the device, and the "config" string identifies
* the specific configuration of the audio stream. All fields are
* device-dependent -- see the device specific manual pages for details.
*
* AUDIO_GETDEV_SUNOS returns a number which is an audio device defined
* herein (making it not too portable)
*
* AUDIO_FLUSH stops all playback and recording, clears all queued buffers,
* resets error counters, and restarts recording and playback as appropriate
* for the current sampling mode.
*/
#define AUDIO_GETINFO _IOR('A', 1, audio_info_t)
#define AUDIO_SETINFO _IOWR('A', 2, audio_info_t)
#define AUDIO_DRAIN _IO('A', 3)
#define AUDIO_GETDEV _IOR('A', 4, audio_device_t)
#define AUDIO_GETDEV_SUNOS _IOR('A', 4, int)
#define AUDIO_FLUSH _IO('A', 5)
/* Define possible audio hardware configurations for
* old SunOS-style AUDIO_GETDEV ioctl */
#define AUDIO_DEV_UNKNOWN (0) /* not defined */
#define AUDIO_DEV_AMD (1) /* audioamd device */
#define AUDIO_DEV_SPEAKERBOX (2) /* dbri device with speakerbox */
#define AUDIO_DEV_CODEC (3) /* dbri device (internal speaker) */
#define AUDIO_DEV_CS4231 (5) /* cs4231 device */
/*
* The following ioctl sets the audio device into an internal loopback mode,
* if the hardware supports this. The argument is TRUE to set loopback,
* FALSE to reset to normal operation. If the hardware does not support
* internal loopback, the ioctl should fail with EINVAL.
* Causes ADC data to be digitally mixed in and sent to the DAC.
*/
#define AUDIO_DIAG_LOOPBACK _IOW('A', 101, int)
#endif /* _AUDIOIO_H_ */