linux/drivers/ata/pata_pcmcia.c

451 lines
14 KiB
C
Raw Normal View History

/*
* pata_pcmcia.c - PCMCIA PATA controller driver.
* Copyright 2005-2006 Red Hat Inc, all rights reserved.
* PCMCIA ident update Copyright 2006 Marcin Juszkiewicz
* <openembedded@hrw.one.pl>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Heavily based upon ide-cs.c
* The initial developer of the original code is David A. Hinds
* <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
* are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
#include <linux/libata.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
#define DRV_NAME "pata_pcmcia"
#define DRV_VERSION "0.3.3"
/*
* Private data structure to glue stuff together
*/
struct ata_pcmcia_info {
struct pcmcia_device *pdev;
int ndev;
dev_node_t node;
};
/**
* pcmcia_set_mode - PCMCIA specific mode setup
* @link: link
* @r_failed_dev: Return pointer for failed device
*
* Perform the tuning and setup of the devices and timings, which
* for PCMCIA is the same as any other controller. We wrap it however
* as we need to spot hardware with incorrect or missing master/slave
* decode, which alas is embarrassingly common in the PC world
*/
static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
{
struct ata_device *master = &link->device[0];
struct ata_device *slave = &link->device[1];
if (!ata_dev_enabled(master) || !ata_dev_enabled(slave))
return ata_do_set_mode(link, r_failed_dev);
if (memcmp(master->id + ATA_ID_FW_REV, slave->id + ATA_ID_FW_REV,
ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0) {
/* Suspicious match, but could be two cards from
the same vendor - check serial */
if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO,
ATA_ID_SERNO_LEN) == 0 && master->id[ATA_ID_SERNO] >> 8) {
ata_dev_printk(slave, KERN_WARNING, "is a ghost device, ignoring.\n");
ata_dev_disable(slave);
}
}
return ata_do_set_mode(link, r_failed_dev);
}
/**
* pcmcia_set_mode_8bit - PCMCIA specific mode setup
* @link: link
* @r_failed_dev: Return pointer for failed device
*
* For the simple emulated 8bit stuff the less we do the better.
*/
static int pcmcia_set_mode_8bit(struct ata_link *link,
struct ata_device **r_failed_dev)
{
return 0;
}
/**
* ata_data_xfer_8bit - Transfer data by 8bit PIO
* @dev: device to target
* @buf: data buffer
* @buflen: buffer length
* @rw: read/write
*
* Transfer data from/to the device data register by 8 bit PIO.
*
* LOCKING:
* Inherited from caller.
*/
static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw)
{
struct ata_port *ap = dev->link->ap;
if (rw == READ)
ioread8_rep(ap->ioaddr.data_addr, buf, buflen);
else
iowrite8_rep(ap->ioaddr.data_addr, buf, buflen);
return buflen;
}
static struct scsi_host_template pcmcia_sht = {
ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations pcmcia_port_ops = {
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-25 03:22:49 +00:00
.inherits = &ata_sff_port_ops,
.sff_data_xfer = ata_sff_data_xfer_noirq,
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-25 03:22:49 +00:00
.cable_detect = ata_cable_40wire,
.set_mode = pcmcia_set_mode,
};
static struct ata_port_operations pcmcia_8bit_port_ops = {
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-25 03:22:49 +00:00
.inherits = &ata_sff_port_ops,
.sff_data_xfer = ata_data_xfer_8bit,
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-25 03:22:49 +00:00
.cable_detect = ata_cable_40wire,
.set_mode = pcmcia_set_mode_8bit,
};
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
struct pcmcia_config_check {
unsigned long ctl_base;
int skip_vcc;
int is_kme;
};
static int pcmcia_check_one_config(struct pcmcia_device *pdev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
unsigned int vcc,
void *priv_data)
{
struct pcmcia_config_check *stk = priv_data;
/* Check for matching Vcc, unless we're desperate */
if (!stk->skip_vcc) {
if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
return -ENODEV;
} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
return -ENODEV;
}
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
pdev->io.BasePort1 = io->win[0].base;
pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
if (!(io->flags & CISTPL_IO_16BIT))
pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
if (io->nwin == 2) {
pdev->io.NumPorts1 = 8;
pdev->io.BasePort2 = io->win[1].base;
pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
if (pcmcia_request_io(pdev, &pdev->io) != 0)
return -ENODEV;
stk->ctl_base = pdev->io.BasePort2;
} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
pdev->io.NumPorts1 = io->win[0].len;
pdev->io.NumPorts2 = 0;
if (pcmcia_request_io(pdev, &pdev->io) != 0)
return -ENODEV;
stk->ctl_base = pdev->io.BasePort1 + 0x0e;
} else
return -ENODEV;
/* If we've got this far, we're done */
return 0;
}
return -ENODEV;
}
/**
* pcmcia_init_one - attach a PCMCIA interface
* @pdev: pcmcia device
*
* Register a PCMCIA IDE interface. Such interfaces are PIO 0 and
* shared IRQ.
*/
static int pcmcia_init_one(struct pcmcia_device *pdev)
{
struct ata_host *host;
struct ata_port *ap;
struct ata_pcmcia_info *info;
struct pcmcia_config_check *stk = NULL;
int last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
unsigned long io_base, ctl_base;
void __iomem *io_addr, *ctl_addr;
int n_ports = 1;
struct ata_port_operations *ops = &pcmcia_port_ops;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (info == NULL)
return -ENOMEM;
/* Glue stuff together. FIXME: We may be able to get rid of info with care */
info->pdev = pdev;
pdev->priv = info;
/* Set up attributes in order to probe card and get resources */
pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
pdev->io.IOAddrLines = 3;
pdev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
pdev->irq.IRQInfo1 = IRQ_LEVEL_ID;
pdev->conf.Attributes = CONF_ENABLE_IRQ;
pdev->conf.IntType = INT_MEMORY_AND_IO;
/* See if we have a manufacturer identifier. Use it to set is_kme for
vendor quirks */
is_kme = ((pdev->manf_id == MANFID_KME) &&
((pdev->card_id == PRODID_KME_KXLC005_A) ||
(pdev->card_id == PRODID_KME_KXLC005_B)));
/* Allocate resoure probing structures */
stk = kzalloc(sizeof(*stk), GFP_KERNEL);
if (!stk)
goto out1;
stk->is_kme = is_kme;
stk->skip_vcc = io_base = ctl_base = 0;
if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) {
stk->skip_vcc = 1;
if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk))
goto failed; /* No suitable config found */
}
io_base = pdev->io.BasePort1;
ctl_base = stk->ctl_base;
CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf));
/* iomap */
ret = -ENOMEM;
io_addr = devm_ioport_map(&pdev->dev, io_base, 8);
ctl_addr = devm_ioport_map(&pdev->dev, ctl_base, 1);
if (!io_addr || !ctl_addr)
goto failed;
/* Success. Disable the IRQ nIEN line, do quirks */
iowrite8(0x02, ctl_addr);
if (is_kme)
iowrite8(0x81, ctl_addr + 0x01);
/* FIXME: Could be more ports at base + 0x10 but we only deal with
one right now */
if (pdev->io.NumPorts1 >= 0x20)
n_ports = 2;
if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620)
ops = &pcmcia_8bit_port_ops;
/*
* Having done the PCMCIA plumbing the ATA side is relatively
* sane.
*/
ret = -ENOMEM;
host = ata_host_alloc(&pdev->dev, n_ports);
if (!host)
goto failed;
for (p = 0; p < n_ports; p++) {
ap = host->ports[p];
ap->ops = ops;
ap->pio_mask = 1; /* ISA so PIO 0 cycles */
ap->flags |= ATA_FLAG_SLAVE_POSS;
ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;
ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p;
ata_sff_std_ports(&ap->ioaddr);
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
}
/* activate */
ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_sff_interrupt,
IRQF_SHARED, &pcmcia_sht);
if (ret)
goto failed;
info->ndev = 1;
kfree(stk);
return 0;
cs_failed:
cs_error(pdev, last_fn, last_ret);
failed:
kfree(stk);
info->ndev = 0;
pcmcia_disable_device(pdev);
out1:
kfree(info);
return ret;
}
/**
* pcmcia_remove_one - unplug an pcmcia interface
* @pdev: pcmcia device
*
* A PCMCIA ATA device has been unplugged. Perform the needed
* cleanup. Also called on module unload for any active devices.
*/
static void pcmcia_remove_one(struct pcmcia_device *pdev)
{
struct ata_pcmcia_info *info = pdev->priv;
struct device *dev = &pdev->dev;
if (info != NULL) {
/* If we have attached the device to the ATA layer, detach it */
if (info->ndev) {
struct ata_host *host = dev_get_drvdata(dev);
ata_host_detach(host);
}
info->ndev = 0;
pdev->priv = NULL;
}
pcmcia_disable_device(pdev);
kfree(info);
}
static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_FUNC_ID(4),
PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */
PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */
PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */
PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */
PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883),
PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d),
PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, pcmcia_devices);
static struct pcmcia_driver pcmcia_driver = {
.owner = THIS_MODULE,
.drv = {
.name = DRV_NAME,
},
.id_table = pcmcia_devices,
.probe = pcmcia_init_one,
.remove = pcmcia_remove_one,
};
static int __init pcmcia_init(void)
{
return pcmcia_register_driver(&pcmcia_driver);
}
static void __exit pcmcia_exit(void)
{
pcmcia_unregister_driver(&pcmcia_driver);
}
MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for PCMCIA ATA");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
module_init(pcmcia_init);
module_exit(pcmcia_exit);