q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/drivers/net/usb/pegasus.h

316 lines
11 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Copyright (c) 1999-2003 Petko Manolov - Petkan (petkan@users.sourceforge.net)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#ifndef PEGASUS_DEV
#define PEGASUS_II 0x80000000
#define HAS_HOME_PNA 0x40000000
#define PEGASUS_MTU 1536
#define RX_SKBS 4
#define EPROM_WRITE 0x01
#define EPROM_READ 0x02
#define EPROM_DONE 0x04
#define EPROM_WR_ENABLE 0x10
#define EPROM_LOAD 0x20
#define PHY_DONE 0x80
#define PHY_READ 0x40
#define PHY_WRITE 0x20
#define DEFAULT_GPIO_RESET 0x24
#define DEFAULT_GPIO_SET 0x26
#define PEGASUS_PRESENT 0x00000001
#define PEGASUS_TX_BUSY 0x00000004
#define PEGASUS_RX_BUSY 0x00000008
#define CTRL_URB_RUNNING 0x00000010
#define CTRL_URB_SLEEP 0x00000020
#define PEGASUS_UNPLUG 0x00000040
#define PEGASUS_RX_URB_FAIL 0x00000080
#define ETH_REGS_CHANGE 0x40000000
#define ETH_REGS_CHANGED 0x80000000
#define RX_MULTICAST 2
#define RX_PROMISCUOUS 4
#define REG_TIMEOUT (HZ)
#define PEGASUS_TX_TIMEOUT (HZ*10)
#define TX_UNDERRUN 0x80
#define EXCESSIVE_COL 0x40
#define LATE_COL 0x20
#define NO_CARRIER 0x10
#define LOSS_CARRIER 0x08
#define JABBER_TIMEOUT 0x04
#define LINK_STATUS 0x01
#define PEGASUS_REQT_READ 0xc0
#define PEGASUS_REQT_WRITE 0x40
#define PEGASUS_REQ_GET_REGS 0xf0
#define PEGASUS_REQ_SET_REGS 0xf1
#define PEGASUS_REQ_SET_REG PEGASUS_REQ_SET_REGS
enum pegasus_registers {
EthCtrl0 = 0,
EthCtrl1 = 1,
EthCtrl2 = 2,
EthID = 0x10,
Reg1d = 0x1d,
EpromOffset = 0x20,
EpromData = 0x21, /* 0x21 low, 0x22 high byte */
EpromCtrl = 0x23,
PhyAddr = 0x25,
usb: pegasus: fixed coding style issues Fixed brace, static initialization, comment, whitespace and spacing coding style issues. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-26 06:58:54 +00:00
PhyData = 0x26, /* 0x26 low, 0x27 high byte */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PhyCtrl = 0x28,
UsbStst = 0x2a,
EthTxStat0 = 0x2b,
EthTxStat1 = 0x2c,
EthRxStat = 0x2d,
WakeupControl = 0x78,
Reg7b = 0x7b,
Gpio0 = 0x7e,
Gpio1 = 0x7f,
Reg81 = 0x81,
};
typedef struct pegasus {
struct usb_device *usb;
struct usb_interface *intf;
struct net_device *net;
struct net_device_stats stats;
struct mii_if_info mii;
unsigned flags;
unsigned features;
u32 msg_enable;
u32 wolopts;
int dev_index;
int intr_interval;
struct tasklet_struct rx_tl;
WorkStruct: make allyesconfig Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:57:56 +00:00
struct delayed_work carrier_check;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct urb *ctrl_urb, *rx_urb, *tx_urb, *intr_urb;
struct sk_buff *rx_pool[RX_SKBS];
struct sk_buff *rx_skb;
struct usb_ctrlrequest dr;
wait_queue_head_t ctrl_wait;
spinlock_t rx_pool_lock;
int chip;
unsigned char intr_buff[8];
__u8 tx_buff[PEGASUS_MTU];
__u8 eth_regs[4];
__u8 phy;
__u8 gpio_res;
} pegasus_t;
struct usb_eth_dev {
char *name;
__u16 vendor;
__u16 device;
__u32 private; /* LSB is gpio reset value */
};
#define VENDOR_3COM 0x0506
#define VENDOR_ABOCOM 0x07b8
#define VENDOR_ACCTON 0x083a
#define VENDOR_ADMTEK 0x07a6
#define VENDOR_AEILAB 0x3334
#define VENDOR_ALLIEDTEL 0x07c9
#define VENDOR_ATEN 0x0557
#define VENDOR_BELKIN 0x050d
#define VENDOR_BILLIONTON 0x08dd
#define VENDOR_COMPAQ 0x049f
#define VENDOR_COREGA 0x07aa
#define VENDOR_DLINK 0x2001
#define VENDOR_ELCON 0x0db7
USB: Support for ELECOM LD-USB20 in pegasus This patch is support LD-USB20 of the USB LAN device. http://www2.elecom.co.jp/products/LD-USB20.html ( Japanese only ) I am using this device. And, I confirmed work by using this patch. Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp> Acked-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-29 07:47:41 +00:00
#define VENDOR_ELECOM 0x056e
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#define VENDOR_ELSA 0x05cc
#define VENDOR_GIGABYTE 0x1044
#define VENDOR_HAWKING 0x0e66
#define VENDOR_HP 0x03f0
#define VENDOR_IODATA 0x04bb
#define VENDOR_KINGSTON 0x0951
#define VENDOR_LANEED 0x056e
#define VENDOR_LINKSYS 0x066b
[PATCH] USB: Pegasus: Linksys USBVPN1 support + cleanup This patch adds a second linksys vendor-id (077b) and the product id of the pegasus based adapter USBVPN1 http://www1.linksys.com/Products/product.asp?prid=3D543&scid=3D30 Furthermore it replaces all LINKSYS_GPIO_RESET with DEFAULT_GPIO_RESET as both are declared like this: #define DEFAULT_GPIO_RESET 0x24 #define LINKSYS_GPIO_RESET 0x24 This is misleading and confusing. The check is now done via the VENDOR_ID in pegasus.c: if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS Signed-off-by: Malte Doersam <mdoersam@arcor.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-28 16:48:33 +00:00
#define VENDOR_LINKSYS2 0x077b
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#define VENDOR_MELCO 0x0411
#define VENDOR_MICROSOFT 0x045e
#define VENDOR_MOBILITY 0x1342
#define VENDOR_NETGEAR 0x0846
#define VENDOR_OCT 0x0b39
#define VENDOR_SMARTBRIDGES 0x08d1
#define VENDOR_SMC 0x0707
#define VENDOR_SOHOWARE 0x15e8
#define VENDOR_SIEMENS 0x067c
#else /* PEGASUS_DEV */
usb: pegasus: fixed coding style issues Fixed brace, static initialization, comment, whitespace and spacing coding style issues. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-26 06:58:54 +00:00
PEGASUS_DEV("3Com USB Ethernet 3C460B", VENDOR_3COM, 0x4601,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("ATEN USB Ethernet UC-110T", VENDOR_ATEN, 0x2007,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x110c,
DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4104,
DEFAULT_GPIO_RESET | HAS_HOME_PNA)
PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4004,
DEFAULT_GPIO_RESET | HAS_HOME_PNA)
PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4007,
DEFAULT_GPIO_RESET | HAS_HOME_PNA)
PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4102,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4002,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400b,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
VENDOR_ADMTEK, 0x8511,
usb: pegasus: fixed coding style issues Fixed brace, static initialization, comment, whitespace and spacing coding style issues. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-26 06:58:54 +00:00
DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
PEGASUS_DEV("ADMtek ADM8513 \"Pegasus II\" USB Ethernet",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
VENDOR_ADMTEK, 0x8513,
usb: pegasus: fixed coding style issues Fixed brace, static initialization, comment, whitespace and spacing coding style issues. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-26 06:58:54 +00:00
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("ADMtek ADM8515 \"Pegasus II\" USB-2.0 Ethernet",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
VENDOR_ADMTEK, 0x8515,
usb: pegasus: fixed coding style issues Fixed brace, static initialization, comment, whitespace and spacing coding style issues. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-26 06:58:54 +00:00
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("ADMtek AN986 \"Pegasus\" USB Ethernet (evaluation board)",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
VENDOR_ADMTEK, 0x0986,
usb: pegasus: fixed coding style issues Fixed brace, static initialization, comment, whitespace and spacing coding style issues. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-26 06:58:54 +00:00
DEFAULT_GPIO_RESET | HAS_HOME_PNA)
PEGASUS_DEV("AN986A USB MAC", VENDOR_ADMTEK, 1986,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
DEFAULT_GPIO_RESET | PEGASUS_II)
net: Teach pegasus driver to ignore bluetoother adapters with clashing Vendor:Product IDs The Belkin F8T012xx1 bluetooth adaptor has the same vendor and product IDs as the Belkin F5D5050, so we need to teach the pegasus driver to ignore adaptors belonging to the "Wireless" class 0xE0. For this one case anyway, seeing as pegasus is a driver for "Wired" adaptors. Signed-off-by: Chris Rankin <rankincj@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13 07:32:02 +00:00
/*
* Distinguish between this Belkin adaptor and the Belkin bluetooth adaptors
* with the same product IDs by checking the device class too.
*/
usb: pegasus: fixed coding style issues Fixed brace, static initialization, comment, whitespace and spacing coding style issues. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-26 06:58:54 +00:00
PEGASUS_DEV_CLASS("Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("Belkin F5U122 10/100 USB Ethernet", VENDOR_BELKIN, 0x0122,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
DEFAULT_GPIO_RESET | HAS_HOME_PNA)
PEGASUS_DEV("iPAQ Networking 10/100 USB", VENDOR_COMPAQ, 0x8511,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("Billionton USBEL-100", VENDOR_BILLIONTON, 0x0988,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("Billionton USBE-100", VENDOR_BILLIONTON, 0x8511,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("Corega FEther USB-TX", VENDOR_COREGA, 0x0004,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("Corega FEther USB-TXS", VENDOR_COREGA, 0x000d,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4001,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4002,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4102,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x400b,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x200c,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003,
DEFAULT_GPIO_RESET | HAS_HOME_PNA)
PEGASUS_DEV("D-Link DSB-650", VENDOR_DLINK, 0xabc1,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002,
DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
PEGASUS_DEV("ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM, 0x4010,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("EasiDock Ethernet", VENDOR_MOBILITY, 0x0304,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
DEFAULT_GPIO_RESET)
usb: pegasus: fixed coding style issues Fixed brace, static initialization, comment, whitespace and spacing coding style issues. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-26 06:58:54 +00:00
PEGASUS_DEV("GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("IO DATA USB ETX-US2", VENDOR_IODATA, 0x093a,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("LANEED USB Ethernet LD-USBL/TX", VENDOR_LANEED, 0x4005,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("Linksys USB10TX", VENDOR_LINKSYS, 0x2202,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("Linksys USB100TX", VENDOR_LINKSYS, 0x2203,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("Linksys USB100TX", VENDOR_LINKSYS, 0x2204,
DEFAULT_GPIO_RESET | HAS_HOME_PNA)
PEGASUS_DEV("Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("Linksys USB10TX", VENDOR_LINKSYS, 0x200c,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("Microsoft MN-110", VENDOR_MICROSOFT, 0x007a,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("NETGEAR FA101", VENDOR_NETGEAR, 0x1020,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("OCT Inc.", VENDOR_OCT, 0x0109,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("OCT USB TO Ethernet", VENDOR_OCT, 0x0901,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("smartNIC 2 PnP Adapter", VENDOR_SMARTBRIDGES, 0x0003,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("SMC 202 USB Ethernet", VENDOR_SMC, 0x0200,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("SMC 2206 USB Ethernet", VENDOR_SMC, 0x0201,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("SOHOware NUB100 Ethernet", VENDOR_SOHOWARE, 0x9100,
DEFAULT_GPIO_RESET)
PEGASUS_DEV("SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV("SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001,
DEFAULT_GPIO_RESET | PEGASUS_II)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif /* PEGASUS_DEV */
Reference in a new issue Copy permalink