linux/net/8021q/vlan_core.c

176 lines
4.2 KiB
C
Raw Normal View History

#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/if_vlan.h>
#include <linux/netpoll.h>
#include "vlan.h"
bool vlan_do_receive(struct sk_buff **skbp)
{
vlan: Centralize handling of hardware acceleration. Currently each driver that is capable of vlan hardware acceleration must be aware of the vlan groups that are configured and then pass the stripped tag to a specialized receive function. This is different from other types of hardware offload in that it places a significant amount of knowledge in the driver itself rather keeping it in the networking core. This makes vlan offloading function more similarly to other forms of offloading (such as checksum offloading or TSO) by doing the following: * On receive, stripped vlans are passed directly to the network core, without attempting to check for vlan groups or reconstructing the header if no group * vlans are made less special by folding the logic into the main receive routines * On transmit, the device layer will add the vlan header in software if the hardware doesn't support it, instead of spreading that logic out in upper layers, such as bonding. There are a number of advantages to this: * Fixes all bugs with drivers incorrectly dropping vlan headers at once. * Avoids having to disable VLAN acceleration when in promiscuous mode (good for bridging since it always puts devices in promiscuous mode). * Keeps VLAN tag separate until given to ultimate consumer, which avoids needing to do header reconstruction as in tg3 unless absolutely necessary. * Consolidates common code in core networking. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 13:56:06 +00:00
struct sk_buff *skb = *skbp;
u16 vlan_id = skb->vlan_tci & VLAN_VID_MASK;
struct net_device *vlan_dev;
struct vlan_pcpu_stats *rx_stats;
vlan: Centralize handling of hardware acceleration. Currently each driver that is capable of vlan hardware acceleration must be aware of the vlan groups that are configured and then pass the stripped tag to a specialized receive function. This is different from other types of hardware offload in that it places a significant amount of knowledge in the driver itself rather keeping it in the networking core. This makes vlan offloading function more similarly to other forms of offloading (such as checksum offloading or TSO) by doing the following: * On receive, stripped vlans are passed directly to the network core, without attempting to check for vlan groups or reconstructing the header if no group * vlans are made less special by folding the logic into the main receive routines * On transmit, the device layer will add the vlan header in software if the hardware doesn't support it, instead of spreading that logic out in upper layers, such as bonding. There are a number of advantages to this: * Fixes all bugs with drivers incorrectly dropping vlan headers at once. * Avoids having to disable VLAN acceleration when in promiscuous mode (good for bridging since it always puts devices in promiscuous mode). * Keeps VLAN tag separate until given to ultimate consumer, which avoids needing to do header reconstruction as in tg3 unless absolutely necessary. * Consolidates common code in core networking. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 13:56:06 +00:00
vlan_dev = vlan_find_dev(skb->dev, vlan_id);
if (!vlan_dev) {
if (vlan_id)
skb->pkt_type = PACKET_OTHERHOST;
return false;
}
vlan: Centralize handling of hardware acceleration. Currently each driver that is capable of vlan hardware acceleration must be aware of the vlan groups that are configured and then pass the stripped tag to a specialized receive function. This is different from other types of hardware offload in that it places a significant amount of knowledge in the driver itself rather keeping it in the networking core. This makes vlan offloading function more similarly to other forms of offloading (such as checksum offloading or TSO) by doing the following: * On receive, stripped vlans are passed directly to the network core, without attempting to check for vlan groups or reconstructing the header if no group * vlans are made less special by folding the logic into the main receive routines * On transmit, the device layer will add the vlan header in software if the hardware doesn't support it, instead of spreading that logic out in upper layers, such as bonding. There are a number of advantages to this: * Fixes all bugs with drivers incorrectly dropping vlan headers at once. * Avoids having to disable VLAN acceleration when in promiscuous mode (good for bridging since it always puts devices in promiscuous mode). * Keeps VLAN tag separate until given to ultimate consumer, which avoids needing to do header reconstruction as in tg3 unless absolutely necessary. * Consolidates common code in core networking. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 13:56:06 +00:00
skb = *skbp = skb_share_check(skb, GFP_ATOMIC);
if (unlikely(!skb))
return false;
vlan: Centralize handling of hardware acceleration. Currently each driver that is capable of vlan hardware acceleration must be aware of the vlan groups that are configured and then pass the stripped tag to a specialized receive function. This is different from other types of hardware offload in that it places a significant amount of knowledge in the driver itself rather keeping it in the networking core. This makes vlan offloading function more similarly to other forms of offloading (such as checksum offloading or TSO) by doing the following: * On receive, stripped vlans are passed directly to the network core, without attempting to check for vlan groups or reconstructing the header if no group * vlans are made less special by folding the logic into the main receive routines * On transmit, the device layer will add the vlan header in software if the hardware doesn't support it, instead of spreading that logic out in upper layers, such as bonding. There are a number of advantages to this: * Fixes all bugs with drivers incorrectly dropping vlan headers at once. * Avoids having to disable VLAN acceleration when in promiscuous mode (good for bridging since it always puts devices in promiscuous mode). * Keeps VLAN tag separate until given to ultimate consumer, which avoids needing to do header reconstruction as in tg3 unless absolutely necessary. * Consolidates common code in core networking. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 13:56:06 +00:00
skb->dev = vlan_dev;
if (skb->pkt_type == PACKET_OTHERHOST) {
/* Our lower layer thinks this is not local, let's make sure.
* This allows the VLAN to have a different MAC than the
* underlying device, and still route correctly. */
if (!compare_ether_addr(eth_hdr(skb)->h_dest,
vlan_dev->dev_addr))
skb->pkt_type = PACKET_HOST;
}
if (!(vlan_dev_info(vlan_dev)->flags & VLAN_FLAG_REORDER_HDR)) {
unsigned int offset = skb->data - skb_mac_header(skb);
/*
* vlan_insert_tag expect skb->data pointing to mac header.
* So change skb->data before calling it and change back to
* original position later
*/
skb_push(skb, offset);
skb = *skbp = vlan_insert_tag(skb, skb->vlan_tci);
if (!skb)
return false;
skb_pull(skb, offset + VLAN_HLEN);
skb_reset_mac_len(skb);
}
vlan: Centralize handling of hardware acceleration. Currently each driver that is capable of vlan hardware acceleration must be aware of the vlan groups that are configured and then pass the stripped tag to a specialized receive function. This is different from other types of hardware offload in that it places a significant amount of knowledge in the driver itself rather keeping it in the networking core. This makes vlan offloading function more similarly to other forms of offloading (such as checksum offloading or TSO) by doing the following: * On receive, stripped vlans are passed directly to the network core, without attempting to check for vlan groups or reconstructing the header if no group * vlans are made less special by folding the logic into the main receive routines * On transmit, the device layer will add the vlan header in software if the hardware doesn't support it, instead of spreading that logic out in upper layers, such as bonding. There are a number of advantages to this: * Fixes all bugs with drivers incorrectly dropping vlan headers at once. * Avoids having to disable VLAN acceleration when in promiscuous mode (good for bridging since it always puts devices in promiscuous mode). * Keeps VLAN tag separate until given to ultimate consumer, which avoids needing to do header reconstruction as in tg3 unless absolutely necessary. * Consolidates common code in core networking. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 13:56:06 +00:00
skb->priority = vlan_get_ingress_priority(vlan_dev, skb->vlan_tci);
skb->vlan_tci = 0;
rx_stats = this_cpu_ptr(vlan_dev_info(vlan_dev)->vlan_pcpu_stats);
u64_stats_update_begin(&rx_stats->syncp);
rx_stats->rx_packets++;
rx_stats->rx_bytes += skb->len;
if (skb->pkt_type == PACKET_MULTICAST)
rx_stats->rx_multicast++;
u64_stats_update_end(&rx_stats->syncp);
vlan: Centralize handling of hardware acceleration. Currently each driver that is capable of vlan hardware acceleration must be aware of the vlan groups that are configured and then pass the stripped tag to a specialized receive function. This is different from other types of hardware offload in that it places a significant amount of knowledge in the driver itself rather keeping it in the networking core. This makes vlan offloading function more similarly to other forms of offloading (such as checksum offloading or TSO) by doing the following: * On receive, stripped vlans are passed directly to the network core, without attempting to check for vlan groups or reconstructing the header if no group * vlans are made less special by folding the logic into the main receive routines * On transmit, the device layer will add the vlan header in software if the hardware doesn't support it, instead of spreading that logic out in upper layers, such as bonding. There are a number of advantages to this: * Fixes all bugs with drivers incorrectly dropping vlan headers at once. * Avoids having to disable VLAN acceleration when in promiscuous mode (good for bridging since it always puts devices in promiscuous mode). * Keeps VLAN tag separate until given to ultimate consumer, which avoids needing to do header reconstruction as in tg3 unless absolutely necessary. * Consolidates common code in core networking. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 13:56:06 +00:00
return true;
}
/* Must be invoked with rcu_read_lock or with RTNL. */
struct net_device *__vlan_find_dev_deep(struct net_device *real_dev,
u16 vlan_id)
{
struct vlan_group *grp = rcu_dereference_rtnl(real_dev->vlgrp);
if (grp) {
return vlan_group_get_device(grp, vlan_id);
} else {
/*
* Bonding slaves do not have grp assigned to themselves.
* Grp is assigned to bonding master instead.
*/
if (netif_is_bond_slave(real_dev))
return __vlan_find_dev_deep(real_dev->master, vlan_id);
}
return NULL;
}
EXPORT_SYMBOL(__vlan_find_dev_deep);
struct net_device *vlan_dev_real_dev(const struct net_device *dev)
{
return vlan_dev_info(dev)->real_dev;
}
EXPORT_SYMBOL(vlan_dev_real_dev);
u16 vlan_dev_vlan_id(const struct net_device *dev)
{
return vlan_dev_info(dev)->vlan_id;
}
EXPORT_SYMBOL(vlan_dev_vlan_id);
static struct sk_buff *vlan_reorder_header(struct sk_buff *skb)
{
if (skb_cow(skb, skb_headroom(skb)) < 0)
return NULL;
memmove(skb->data - ETH_HLEN, skb->data - VLAN_ETH_HLEN, 2 * ETH_ALEN);
skb->mac_header += VLAN_HLEN;
skb_reset_mac_len(skb);
return skb;
}
static void vlan_set_encap_proto(struct sk_buff *skb, struct vlan_hdr *vhdr)
{
__be16 proto;
unsigned char *rawp;
/*
* Was a VLAN packet, grab the encapsulated protocol, which the layer
* three protocols care about.
*/
proto = vhdr->h_vlan_encapsulated_proto;
if (ntohs(proto) >= 1536) {
skb->protocol = proto;
return;
}
rawp = skb->data;
if (*(unsigned short *) rawp == 0xFFFF)
/*
* This is a magic hack to spot IPX packets. Older Novell
* breaks the protocol design and runs IPX over 802.3 without
* an 802.2 LLC layer. We look for FFFF which isn't a used
* 802.2 SSAP/DSAP. This won't work for fault tolerant netware
* but does for the rest.
*/
skb->protocol = htons(ETH_P_802_3);
else
/*
* Real 802.2 LLC
*/
skb->protocol = htons(ETH_P_802_2);
}
struct sk_buff *vlan_untag(struct sk_buff *skb)
{
struct vlan_hdr *vhdr;
u16 vlan_tci;
if (unlikely(vlan_tx_tag_present(skb))) {
/* vlan_tci is already set-up so leave this for another time */
return skb;
}
skb = skb_share_check(skb, GFP_ATOMIC);
if (unlikely(!skb))
goto err_free;
if (unlikely(!pskb_may_pull(skb, VLAN_HLEN)))
goto err_free;
vhdr = (struct vlan_hdr *) skb->data;
vlan_tci = ntohs(vhdr->h_vlan_TCI);
__vlan_hwaccel_put_tag(skb, vlan_tci);
skb_pull_rcsum(skb, VLAN_HLEN);
vlan_set_encap_proto(skb, vhdr);
skb = vlan_reorder_header(skb);
if (unlikely(!skb))
goto err_free;
return skb;
err_free:
kfree_skb(skb);
return NULL;
}