linux/fs/ubifs/io.c

915 lines
25 KiB
C
Raw Normal View History

/*
* This file is part of UBIFS.
*
* Copyright (C) 2006-2008 Nokia Corporation.
* Copyright (C) 2006, 2007 University of Szeged, Hungary
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 51
* Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Authors: Artem Bityutskiy (Битюцкий Артём)
* Adrian Hunter
* Zoltan Sogor
*/
/*
* This file implements UBIFS I/O subsystem which provides various I/O-related
* helper functions (reading/writing/checking/validating nodes) and implements
* write-buffering support. Write buffers help to save space which otherwise
* would have been wasted for padding to the nearest minimal I/O unit boundary.
* Instead, data first goes to the write-buffer and is flushed when the
* buffer is full or when it is not used for some time (by timer). This is
* similarto the mechanism is used by JFFS2.
*
* Write-buffers are defined by 'struct ubifs_wbuf' objects and protected by
* mutexes defined inside these objects. Since sometimes upper-level code
* has to lock the write-buffer (e.g. journal space reservation code), many
* functions related to write-buffers have "nolock" suffix which means that the
* caller has to lock the write-buffer before calling this function.
*
* UBIFS stores nodes at 64 bit-aligned addresses. If the node length is not
* aligned, UBIFS starts the next node from the aligned address, and the padded
* bytes may contain any rubbish. In other words, UBIFS does not put padding
* bytes in those small gaps. Common headers of nodes store real node lengths,
* not aligned lengths. Indexing nodes also store real lengths in branches.
*
* UBIFS uses padding when it pads to the next min. I/O unit. In this case it
* uses padding nodes or padding bytes, if the padding node does not fit.
*
* All UBIFS nodes are protected by CRC checksums and UBIFS checks all nodes
* every time they are read from the flash media.
*/
#include <linux/crc32.h>
#include "ubifs.h"
/**
* ubifs_check_node - check node.
* @c: UBIFS file-system description object
* @buf: node to check
* @lnum: logical eraseblock number
* @offs: offset within the logical eraseblock
* @quiet: print no messages
*
* This function checks node magic number and CRC checksum. This function also
* validates node length to prevent UBIFS from becoming crazy when an attacker
* feeds it a file-system image with incorrect nodes. For example, too large
* node length in the common header could cause UBIFS to read memory outside of
* allocated buffer when checking the CRC checksum.
*
* This function returns zero in case of success %-EUCLEAN in case of bad CRC
* or magic.
*/
int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum,
int offs, int quiet)
{
int err = -EINVAL, type, node_len;
uint32_t crc, node_crc, magic;
const struct ubifs_ch *ch = buf;
ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0);
ubifs_assert(!(offs & 7) && offs < c->leb_size);
magic = le32_to_cpu(ch->magic);
if (magic != UBIFS_NODE_MAGIC) {
if (!quiet)
ubifs_err("bad magic %#08x, expected %#08x",
magic, UBIFS_NODE_MAGIC);
err = -EUCLEAN;
goto out;
}
type = ch->node_type;
if (type < 0 || type >= UBIFS_NODE_TYPES_CNT) {
if (!quiet)
ubifs_err("bad node type %d", type);
goto out;
}
node_len = le32_to_cpu(ch->len);
if (node_len + offs > c->leb_size)
goto out_len;
if (c->ranges[type].max_len == 0) {
if (node_len != c->ranges[type].len)
goto out_len;
} else if (node_len < c->ranges[type].min_len ||
node_len > c->ranges[type].max_len)
goto out_len;
crc = crc32(UBIFS_CRC32_INIT, buf + 8, node_len - 8);
node_crc = le32_to_cpu(ch->crc);
if (crc != node_crc) {
if (!quiet)
ubifs_err("bad CRC: calculated %#08x, read %#08x",
crc, node_crc);
err = -EUCLEAN;
goto out;
}
return 0;
out_len:
if (!quiet)
ubifs_err("bad node length %d", node_len);
out:
if (!quiet) {
ubifs_err("bad node at LEB %d:%d", lnum, offs);
dbg_dump_node(c, buf);
dbg_dump_stack();
}
return err;
}
/**
* ubifs_pad - pad flash space.
* @c: UBIFS file-system description object
* @buf: buffer to put padding to
* @pad: how many bytes to pad
*
* The flash media obliges us to write only in chunks of %c->min_io_size and
* when we have to write less data we add padding node to the write-buffer and
* pad it to the next minimal I/O unit's boundary. Padding nodes help when the
* media is being scanned. If the amount of wasted space is not enough to fit a
* padding node which takes %UBIFS_PAD_NODE_SZ bytes, we write padding bytes
* pattern (%UBIFS_PADDING_BYTE).
*
* Padding nodes are also used to fill gaps when the "commit-in-gaps" method is
* used.
*/
void ubifs_pad(const struct ubifs_info *c, void *buf, int pad)
{
uint32_t crc;
ubifs_assert(pad >= 0 && !(pad & 7));
if (pad >= UBIFS_PAD_NODE_SZ) {
struct ubifs_ch *ch = buf;
struct ubifs_pad_node *pad_node = buf;
ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC);
ch->node_type = UBIFS_PAD_NODE;
ch->group_type = UBIFS_NO_NODE_GROUP;
ch->padding[0] = ch->padding[1] = 0;
ch->sqnum = 0;
ch->len = cpu_to_le32(UBIFS_PAD_NODE_SZ);
pad -= UBIFS_PAD_NODE_SZ;
pad_node->pad_len = cpu_to_le32(pad);
crc = crc32(UBIFS_CRC32_INIT, buf + 8, UBIFS_PAD_NODE_SZ - 8);
ch->crc = cpu_to_le32(crc);
memset(buf + UBIFS_PAD_NODE_SZ, 0, pad);
} else if (pad > 0)
/* Too little space, padding node won't fit */
memset(buf, UBIFS_PADDING_BYTE, pad);
}
/**
* next_sqnum - get next sequence number.
* @c: UBIFS file-system description object
*/
static unsigned long long next_sqnum(struct ubifs_info *c)
{
unsigned long long sqnum;
spin_lock(&c->cnt_lock);
sqnum = ++c->max_sqnum;
spin_unlock(&c->cnt_lock);
if (unlikely(sqnum >= SQNUM_WARN_WATERMARK)) {
if (sqnum >= SQNUM_WATERMARK) {
ubifs_err("sequence number overflow %llu, end of life",
sqnum);
ubifs_ro_mode(c, -EINVAL);
}
ubifs_warn("running out of sequence numbers, end of life soon");
}
return sqnum;
}
/**
* ubifs_prepare_node - prepare node to be written to flash.
* @c: UBIFS file-system description object
* @node: the node to pad
* @len: node length
* @pad: if the buffer has to be padded
*
* This function prepares node at @node to be written to the media - it
* calculates node CRC, fills the common header, and adds proper padding up to
* the next minimum I/O unit if @pad is not zero.
*/
void ubifs_prepare_node(struct ubifs_info *c, void *node, int len, int pad)
{
uint32_t crc;
struct ubifs_ch *ch = node;
unsigned long long sqnum = next_sqnum(c);
ubifs_assert(len >= UBIFS_CH_SZ);
ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC);
ch->len = cpu_to_le32(len);
ch->group_type = UBIFS_NO_NODE_GROUP;
ch->sqnum = cpu_to_le64(sqnum);
ch->padding[0] = ch->padding[1] = 0;
crc = crc32(UBIFS_CRC32_INIT, node + 8, len - 8);
ch->crc = cpu_to_le32(crc);
if (pad) {
len = ALIGN(len, 8);
pad = ALIGN(len, c->min_io_size) - len;
ubifs_pad(c, node + len, pad);
}
}
/**
* ubifs_prep_grp_node - prepare node of a group to be written to flash.
* @c: UBIFS file-system description object
* @node: the node to pad
* @len: node length
* @last: indicates the last node of the group
*
* This function prepares node at @node to be written to the media - it
* calculates node CRC and fills the common header.
*/
void ubifs_prep_grp_node(struct ubifs_info *c, void *node, int len, int last)
{
uint32_t crc;
struct ubifs_ch *ch = node;
unsigned long long sqnum = next_sqnum(c);
ubifs_assert(len >= UBIFS_CH_SZ);
ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC);
ch->len = cpu_to_le32(len);
if (last)
ch->group_type = UBIFS_LAST_OF_NODE_GROUP;
else
ch->group_type = UBIFS_IN_NODE_GROUP;
ch->sqnum = cpu_to_le64(sqnum);
ch->padding[0] = ch->padding[1] = 0;
crc = crc32(UBIFS_CRC32_INIT, node + 8, len - 8);
ch->crc = cpu_to_le32(crc);
}
/**
* wbuf_timer_callback - write-buffer timer callback function.
* @data: timer data (write-buffer descriptor)
*
* This function is called when the write-buffer timer expires.
*/
static void wbuf_timer_callback_nolock(unsigned long data)
{
struct ubifs_wbuf *wbuf = (struct ubifs_wbuf *)data;
wbuf->need_sync = 1;
wbuf->c->need_wbuf_sync = 1;
ubifs_wake_up_bgt(wbuf->c);
}
/**
* new_wbuf_timer - start new write-buffer timer.
* @wbuf: write-buffer descriptor
*/
static void new_wbuf_timer_nolock(struct ubifs_wbuf *wbuf)
{
ubifs_assert(!timer_pending(&wbuf->timer));
if (!wbuf->timeout)
return;
wbuf->timer.expires = jiffies + wbuf->timeout;
add_timer(&wbuf->timer);
}
/**
* cancel_wbuf_timer - cancel write-buffer timer.
* @wbuf: write-buffer descriptor
*/
static void cancel_wbuf_timer_nolock(struct ubifs_wbuf *wbuf)
{
/*
* If the syncer is waiting for the lock (from the background thread's
* context) and another task is changing write-buffer then the syncing
* should be canceled.
*/
wbuf->need_sync = 0;
del_timer(&wbuf->timer);
}
/**
* ubifs_wbuf_sync_nolock - synchronize write-buffer.
* @wbuf: write-buffer to synchronize
*
* This function synchronizes write-buffer @buf and returns zero in case of
* success or a negative error code in case of failure.
*/
int ubifs_wbuf_sync_nolock(struct ubifs_wbuf *wbuf)
{
struct ubifs_info *c = wbuf->c;
int err, dirt;
cancel_wbuf_timer_nolock(wbuf);
if (!wbuf->used || wbuf->lnum == -1)
/* Write-buffer is empty or not seeked */
return 0;
dbg_io("LEB %d:%d, %d bytes",
wbuf->lnum, wbuf->offs, wbuf->used);
ubifs_assert(!(c->vfs_sb->s_flags & MS_RDONLY));
ubifs_assert(!(wbuf->avail & 7));
ubifs_assert(wbuf->offs + c->min_io_size <= c->leb_size);
if (c->ro_media)
return -EROFS;
ubifs_pad(c, wbuf->buf + wbuf->used, wbuf->avail);
err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs,
c->min_io_size, wbuf->dtype);
if (err) {
ubifs_err("cannot write %d bytes to LEB %d:%d",
c->min_io_size, wbuf->lnum, wbuf->offs);
dbg_dump_stack();
return err;
}
dirt = wbuf->avail;
spin_lock(&wbuf->lock);
wbuf->offs += c->min_io_size;
wbuf->avail = c->min_io_size;
wbuf->used = 0;
wbuf->next_ino = 0;
spin_unlock(&wbuf->lock);
if (wbuf->sync_callback)
err = wbuf->sync_callback(c, wbuf->lnum,
c->leb_size - wbuf->offs, dirt);
return err;
}
/**
* ubifs_wbuf_seek_nolock - seek write-buffer.
* @wbuf: write-buffer
* @lnum: logical eraseblock number to seek to
* @offs: logical eraseblock offset to seek to
* @dtype: data type
*
* This function targets the write buffer to logical eraseblock @lnum:@offs.
* The write-buffer is synchronized if it is not empty. Returns zero in case of
* success and a negative error code in case of failure.
*/
int ubifs_wbuf_seek_nolock(struct ubifs_wbuf *wbuf, int lnum, int offs,
int dtype)
{
const struct ubifs_info *c = wbuf->c;
dbg_io("LEB %d:%d", lnum, offs);
ubifs_assert(lnum >= 0 && lnum < c->leb_cnt);
ubifs_assert(offs >= 0 && offs <= c->leb_size);
ubifs_assert(offs % c->min_io_size == 0 && !(offs & 7));
ubifs_assert(lnum != wbuf->lnum);
if (wbuf->used > 0) {
int err = ubifs_wbuf_sync_nolock(wbuf);
if (err)
return err;
}
spin_lock(&wbuf->lock);
wbuf->lnum = lnum;
wbuf->offs = offs;
wbuf->avail = c->min_io_size;
wbuf->used = 0;
spin_unlock(&wbuf->lock);
wbuf->dtype = dtype;
return 0;
}
/**
* ubifs_bg_wbufs_sync - synchronize write-buffers.
* @c: UBIFS file-system description object
*
* This function is called by background thread to synchronize write-buffers.
* Returns zero in case of success and a negative error code in case of
* failure.
*/
int ubifs_bg_wbufs_sync(struct ubifs_info *c)
{
int err, i;
if (!c->need_wbuf_sync)
return 0;
c->need_wbuf_sync = 0;
if (c->ro_media) {
err = -EROFS;
goto out_timers;
}
dbg_io("synchronize");
for (i = 0; i < c->jhead_cnt; i++) {
struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf;
cond_resched();
/*
* If the mutex is locked then wbuf is being changed, so
* synchronization is not necessary.
*/
if (mutex_is_locked(&wbuf->io_mutex))
continue;
mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
if (!wbuf->need_sync) {
mutex_unlock(&wbuf->io_mutex);
continue;
}
err = ubifs_wbuf_sync_nolock(wbuf);
mutex_unlock(&wbuf->io_mutex);
if (err) {
ubifs_err("cannot sync write-buffer, error %d", err);
ubifs_ro_mode(c, err);
goto out_timers;
}
}
return 0;
out_timers:
/* Cancel all timers to prevent repeated errors */
for (i = 0; i < c->jhead_cnt; i++) {
struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf;
mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
cancel_wbuf_timer_nolock(wbuf);
mutex_unlock(&wbuf->io_mutex);
}
return err;
}
/**
* ubifs_wbuf_write_nolock - write data to flash via write-buffer.
* @wbuf: write-buffer
* @buf: node to write
* @len: node length
*
* This function writes data to flash via write-buffer @wbuf. This means that
* the last piece of the node won't reach the flash media immediately if it
* does not take whole minimal I/O unit. Instead, the node will sit in RAM
* until the write-buffer is synchronized (e.g., by timer).
*
* This function returns zero in case of success and a negative error code in
* case of failure. If the node cannot be written because there is no more
* space in this logical eraseblock, %-ENOSPC is returned.
*/
int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len)
{
struct ubifs_info *c = wbuf->c;
int err, written, n, aligned_len = ALIGN(len, 8), offs;
dbg_io("%d bytes (%s) to wbuf at LEB %d:%d", len,
dbg_ntype(((struct ubifs_ch *)buf)->node_type), wbuf->lnum,
wbuf->offs + wbuf->used);
ubifs_assert(len > 0 && wbuf->lnum >= 0 && wbuf->lnum < c->leb_cnt);
ubifs_assert(wbuf->offs >= 0 && wbuf->offs % c->min_io_size == 0);
ubifs_assert(!(wbuf->offs & 7) && wbuf->offs <= c->leb_size);
ubifs_assert(wbuf->avail > 0 && wbuf->avail <= c->min_io_size);
ubifs_assert(mutex_is_locked(&wbuf->io_mutex));
if (c->leb_size - wbuf->offs - wbuf->used < aligned_len) {
err = -ENOSPC;
goto out;
}
cancel_wbuf_timer_nolock(wbuf);
if (c->ro_media)
return -EROFS;
if (aligned_len <= wbuf->avail) {
/*
* The node is not very large and fits entirely within
* write-buffer.
*/
memcpy(wbuf->buf + wbuf->used, buf, len);
if (aligned_len == wbuf->avail) {
dbg_io("flush wbuf to LEB %d:%d", wbuf->lnum,
wbuf->offs);
err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf,
wbuf->offs, c->min_io_size,
wbuf->dtype);
if (err)
goto out;
spin_lock(&wbuf->lock);
wbuf->offs += c->min_io_size;
wbuf->avail = c->min_io_size;
wbuf->used = 0;
wbuf->next_ino = 0;
spin_unlock(&wbuf->lock);
} else {
spin_lock(&wbuf->lock);
wbuf->avail -= aligned_len;
wbuf->used += aligned_len;
spin_unlock(&wbuf->lock);
}
goto exit;
}
/*
* The node is large enough and does not fit entirely within current
* minimal I/O unit. We have to fill and flush write-buffer and switch
* to the next min. I/O unit.
*/
dbg_io("flush wbuf to LEB %d:%d", wbuf->lnum, wbuf->offs);
memcpy(wbuf->buf + wbuf->used, buf, wbuf->avail);
err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs,
c->min_io_size, wbuf->dtype);
if (err)
goto out;
offs = wbuf->offs + c->min_io_size;
len -= wbuf->avail;
aligned_len -= wbuf->avail;
written = wbuf->avail;
/*
* The remaining data may take more whole min. I/O units, so write the
* remains multiple to min. I/O unit size directly to the flash media.
* We align node length to 8-byte boundary because we anyway flash wbuf
* if the remaining space is less than 8 bytes.
*/
n = aligned_len >> c->min_io_shift;
if (n) {
n <<= c->min_io_shift;
dbg_io("write %d bytes to LEB %d:%d", n, wbuf->lnum, offs);
err = ubi_leb_write(c->ubi, wbuf->lnum, buf + written, offs, n,
wbuf->dtype);
if (err)
goto out;
offs += n;
aligned_len -= n;
len -= n;
written += n;
}
spin_lock(&wbuf->lock);
if (aligned_len)
/*
* And now we have what's left and what does not take whole
* min. I/O unit, so write it to the write-buffer and we are
* done.
*/
memcpy(wbuf->buf, buf + written, len);
wbuf->offs = offs;
wbuf->used = aligned_len;
wbuf->avail = c->min_io_size - aligned_len;
wbuf->next_ino = 0;
spin_unlock(&wbuf->lock);
exit:
if (wbuf->sync_callback) {
int free = c->leb_size - wbuf->offs - wbuf->used;
err = wbuf->sync_callback(c, wbuf->lnum, free, 0);
if (err)
goto out;
}
if (wbuf->used)
new_wbuf_timer_nolock(wbuf);
return 0;
out:
ubifs_err("cannot write %d bytes to LEB %d:%d, error %d",
len, wbuf->lnum, wbuf->offs, err);
dbg_dump_node(c, buf);
dbg_dump_stack();
dbg_dump_leb(c, wbuf->lnum);
return err;
}
/**
* ubifs_write_node - write node to the media.
* @c: UBIFS file-system description object
* @buf: the node to write
* @len: node length
* @lnum: logical eraseblock number
* @offs: offset within the logical eraseblock
* @dtype: node life-time hint (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN)
*
* This function automatically fills node magic number, assigns sequence
* number, and calculates node CRC checksum. The length of the @buf buffer has
* to be aligned to the minimal I/O unit size. This function automatically
* appends padding node and padding bytes if needed. Returns zero in case of
* success and a negative error code in case of failure.
*/
int ubifs_write_node(struct ubifs_info *c, void *buf, int len, int lnum,
int offs, int dtype)
{
int err, buf_len = ALIGN(len, c->min_io_size);
dbg_io("LEB %d:%d, %s, length %d (aligned %d)",
lnum, offs, dbg_ntype(((struct ubifs_ch *)buf)->node_type), len,
buf_len);
ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0);
ubifs_assert(offs % c->min_io_size == 0 && offs < c->leb_size);
if (c->ro_media)
return -EROFS;
ubifs_prepare_node(c, buf, len, 1);
err = ubi_leb_write(c->ubi, lnum, buf, offs, buf_len, dtype);
if (err) {
ubifs_err("cannot write %d bytes to LEB %d:%d, error %d",
buf_len, lnum, offs, err);
dbg_dump_node(c, buf);
dbg_dump_stack();
}
return err;
}
/**
* ubifs_read_node_wbuf - read node from the media or write-buffer.
* @wbuf: wbuf to check for un-written data
* @buf: buffer to read to
* @type: node type
* @len: node length
* @lnum: logical eraseblock number
* @offs: offset within the logical eraseblock
*
* This function reads a node of known type and length, checks it and stores
* in @buf. If the node partially or fully sits in the write-buffer, this
* function takes data from the buffer, otherwise it reads the flash media.
* Returns zero in case of success, %-EUCLEAN if CRC mismatched and a negative
* error code in case of failure.
*/
int ubifs_read_node_wbuf(struct ubifs_wbuf *wbuf, void *buf, int type, int len,
int lnum, int offs)
{
const struct ubifs_info *c = wbuf->c;
int err, rlen, overlap;
struct ubifs_ch *ch = buf;
dbg_io("LEB %d:%d, %s, length %d", lnum, offs, dbg_ntype(type), len);
ubifs_assert(wbuf && lnum >= 0 && lnum < c->leb_cnt && offs >= 0);
ubifs_assert(!(offs & 7) && offs < c->leb_size);
ubifs_assert(type >= 0 && type < UBIFS_NODE_TYPES_CNT);
spin_lock(&wbuf->lock);
overlap = (lnum == wbuf->lnum && offs + len > wbuf->offs);
if (!overlap) {
/* We may safely unlock the write-buffer and read the data */
spin_unlock(&wbuf->lock);
return ubifs_read_node(c, buf, type, len, lnum, offs);
}
/* Don't read under wbuf */
rlen = wbuf->offs - offs;
if (rlen < 0)
rlen = 0;
/* Copy the rest from the write-buffer */
memcpy(buf + rlen, wbuf->buf + offs + rlen - wbuf->offs, len - rlen);
spin_unlock(&wbuf->lock);
if (rlen > 0) {
/* Read everything that goes before write-buffer */
err = ubi_read(c->ubi, lnum, buf, offs, rlen);
if (err && err != -EBADMSG) {
ubifs_err("failed to read node %d from LEB %d:%d, "
"error %d", type, lnum, offs, err);
dbg_dump_stack();
return err;
}
}
if (type != ch->node_type) {
ubifs_err("bad node type (%d but expected %d)",
ch->node_type, type);
goto out;
}
err = ubifs_check_node(c, buf, lnum, offs, 0);
if (err) {
ubifs_err("expected node type %d", type);
return err;
}
rlen = le32_to_cpu(ch->len);
if (rlen != len) {
ubifs_err("bad node length %d, expected %d", rlen, len);
goto out;
}
return 0;
out:
ubifs_err("bad node at LEB %d:%d", lnum, offs);
dbg_dump_node(c, buf);
dbg_dump_stack();
return -EINVAL;
}
/**
* ubifs_read_node - read node.
* @c: UBIFS file-system description object
* @buf: buffer to read to
* @type: node type
* @len: node length (not aligned)
* @lnum: logical eraseblock number
* @offs: offset within the logical eraseblock
*
* This function reads a node of known type and and length, checks it and
* stores in @buf. Returns zero in case of success, %-EUCLEAN if CRC mismatched
* and a negative error code in case of failure.
*/
int ubifs_read_node(const struct ubifs_info *c, void *buf, int type, int len,
int lnum, int offs)
{
int err, l;
struct ubifs_ch *ch = buf;
dbg_io("LEB %d:%d, %s, length %d", lnum, offs, dbg_ntype(type), len);
ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0);
ubifs_assert(len >= UBIFS_CH_SZ && offs + len <= c->leb_size);
ubifs_assert(!(offs & 7) && offs < c->leb_size);
ubifs_assert(type >= 0 && type < UBIFS_NODE_TYPES_CNT);
err = ubi_read(c->ubi, lnum, buf, offs, len);
if (err && err != -EBADMSG) {
ubifs_err("cannot read node %d from LEB %d:%d, error %d",
type, lnum, offs, err);
return err;
}
if (type != ch->node_type) {
ubifs_err("bad node type (%d but expected %d)",
ch->node_type, type);
goto out;
}
err = ubifs_check_node(c, buf, lnum, offs, 0);
if (err) {
ubifs_err("expected node type %d", type);
return err;
}
l = le32_to_cpu(ch->len);
if (l != len) {
ubifs_err("bad node length %d, expected %d", l, len);
goto out;
}
return 0;
out:
ubifs_err("bad node at LEB %d:%d", lnum, offs);
dbg_dump_node(c, buf);
dbg_dump_stack();
return -EINVAL;
}
/**
* ubifs_wbuf_init - initialize write-buffer.
* @c: UBIFS file-system description object
* @wbuf: write-buffer to initialize
*
* This function initializes write buffer. Returns zero in case of success
* %-ENOMEM in case of failure.
*/
int ubifs_wbuf_init(struct ubifs_info *c, struct ubifs_wbuf *wbuf)
{
size_t size;
wbuf->buf = kmalloc(c->min_io_size, GFP_KERNEL);
if (!wbuf->buf)
return -ENOMEM;
size = (c->min_io_size / UBIFS_CH_SZ + 1) * sizeof(ino_t);
wbuf->inodes = kmalloc(size, GFP_KERNEL);
if (!wbuf->inodes) {
kfree(wbuf->buf);
wbuf->buf = NULL;
return -ENOMEM;
}
wbuf->used = 0;
wbuf->lnum = wbuf->offs = -1;
wbuf->avail = c->min_io_size;
wbuf->dtype = UBI_UNKNOWN;
wbuf->sync_callback = NULL;
mutex_init(&wbuf->io_mutex);
spin_lock_init(&wbuf->lock);
wbuf->c = c;
init_timer(&wbuf->timer);
wbuf->timer.function = wbuf_timer_callback_nolock;
wbuf->timer.data = (unsigned long)wbuf;
wbuf->timeout = DEFAULT_WBUF_TIMEOUT;
wbuf->next_ino = 0;
return 0;
}
/**
* ubifs_wbuf_add_ino_nolock - add an inode number into the wbuf inode array.
* @wbuf: the write-buffer whereto add
* @inum: the inode number
*
* This function adds an inode number to the inode array of the write-buffer.
*/
void ubifs_wbuf_add_ino_nolock(struct ubifs_wbuf *wbuf, ino_t inum)
{
if (!wbuf->buf)
/* NOR flash or something similar */
return;
spin_lock(&wbuf->lock);
if (wbuf->used)
wbuf->inodes[wbuf->next_ino++] = inum;
spin_unlock(&wbuf->lock);
}
/**
* wbuf_has_ino - returns if the wbuf contains data from the inode.
* @wbuf: the write-buffer
* @inum: the inode number
*
* This function returns with %1 if the write-buffer contains some data from the
* given inode otherwise it returns with %0.
*/
static int wbuf_has_ino(struct ubifs_wbuf *wbuf, ino_t inum)
{
int i, ret = 0;
spin_lock(&wbuf->lock);
for (i = 0; i < wbuf->next_ino; i++)
if (inum == wbuf->inodes[i]) {
ret = 1;
break;
}
spin_unlock(&wbuf->lock);
return ret;
}
/**
* ubifs_sync_wbufs_by_inode - synchronize write-buffers for an inode.
* @c: UBIFS file-system description object
* @inode: inode to synchronize
*
* This function synchronizes write-buffers which contain nodes belonging to
* @inode. Returns zero in case of success and a negative error code in case of
* failure.
*/
int ubifs_sync_wbufs_by_inode(struct ubifs_info *c, struct inode *inode)
{
int i, err = 0;
for (i = 0; i < c->jhead_cnt; i++) {
struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf;
if (i == GCHD)
/*
* GC head is special, do not look at it. Even if the
* head contains something related to this inode, it is
* a _copy_ of corresponding on-flash node which sits
* somewhere else.
*/
continue;
if (!wbuf_has_ino(wbuf, inode->i_ino))
continue;
mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
if (wbuf_has_ino(wbuf, inode->i_ino))
err = ubifs_wbuf_sync_nolock(wbuf);
mutex_unlock(&wbuf->io_mutex);
if (err) {
ubifs_ro_mode(c, err);
return err;
}
}
return 0;
}