linux/arch/sh/kernel/irq.c

254 lines
5.8 KiB
C
Raw Normal View History

/*
* linux/arch/sh/kernel/irq.c
*
* Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
*
*
* SuperH version: Copyright (C) 1999 Niibe Yutaka
*/
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/kernel_stat.h>
#include <linux/seq_file.h>
#include <asm/irq.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/thread_info.h>
#include <asm/cpu/mmu_context.h>
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themselves, it doesn't deserve
* a generic callback i think.
*/
void ack_bad_irq(unsigned int irq)
{
printk("unexpected IRQ trap at vector %02x\n", irq);
}
#if defined(CONFIG_PROC_FS)
int show_interrupts(struct seq_file *p, void *v)
{
int i = *(loff_t *) v, j;
struct irqaction * action;
unsigned long flags;
if (i == 0) {
seq_puts(p, " ");
for_each_online_cpu(j)
seq_printf(p, "CPU%d ",j);
seq_putc(p, '\n');
}
if (i < NR_IRQS) {
spin_lock_irqsave(&irq_desc[i].lock, flags);
action = irq_desc[i].action;
if (!action)
goto unlock;
seq_printf(p, "%3d: ",i);
seq_printf(p, "%10u ", kstat_irqs(i));
[PATCH] genirq: rename desc->handler to desc->chip This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 09:24:36 +00:00
seq_printf(p, " %14s", irq_desc[i].chip->typename);
seq_printf(p, " %s", action->name);
for (action=action->next; action; action = action->next)
seq_printf(p, ", %s", action->name);
seq_putc(p, '\n');
unlock:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
}
return 0;
}
#endif
#ifdef CONFIG_4KSTACKS
/*
* per-CPU IRQ handling contexts (thread information and stack)
*/
union irq_ctx {
struct thread_info tinfo;
u32 stack[THREAD_SIZE/sizeof(u32)];
};
static union irq_ctx *hardirq_ctx[NR_CPUS];
static union irq_ctx *softirq_ctx[NR_CPUS];
#endif
asmlinkage int do_IRQ(unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7,
struct pt_regs regs)
{
int irq = r4;
#ifdef CONFIG_4KSTACKS
union irq_ctx *curctx, *irqctx;
#endif
irq_enter();
#ifdef CONFIG_DEBUG_STACKOVERFLOW
/* Debugging check for stack overflow: is there less than 1KB free? */
{
long sp;
__asm__ __volatile__ ("and r15, %0" :
"=r" (sp) : "0" (THREAD_SIZE - 1));
if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
printk("do_IRQ: stack overflow: %ld\n",
sp - sizeof(struct thread_info));
dump_stack();
}
}
#endif
#ifdef CONFIG_CPU_HAS_INTEVT
__asm__ __volatile__ (
#ifdef CONFIG_CPU_HAS_SR_RB
"stc r2_bank, %0\n\t"
#else
"mov.l @%1, %0\n\t"
#endif
"shlr2 %0\n\t"
"shlr2 %0\n\t"
"shlr %0\n\t"
"add #-16, %0\n\t"
: "=z" (irq), "=r" (r4)
: "1" (INTEVT)
: "memory"
);
#endif
irq = irq_demux(irq);
#ifdef CONFIG_4KSTACKS
curctx = (union irq_ctx *)current_thread_info();
irqctx = hardirq_ctx[smp_processor_id()];
/*
* this is where we switch to the IRQ stack. However, if we are
* already using the IRQ stack (because we interrupted a hardirq
* handler) we can't do that and just have to keep using the
* current stack (which is the irq stack already after all)
*/
if (curctx != irqctx) {
u32 *isp;
isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
irqctx->tinfo.task = curctx->tinfo.task;
irqctx->tinfo.previous_sp = current_stack_pointer;
__asm__ __volatile__ (
"mov %0, r4 \n"
"mov %1, r5 \n"
"mov r15, r9 \n"
"jsr @%2 \n"
/* swith to the irq stack */
" mov %3, r15 \n"
/* restore the stack (ring zero) */
"mov r9, r15 \n"
: /* no outputs */
: "r" (irq), "r" (&regs), "r" (__do_IRQ), "r" (isp)
/* XXX: A somewhat excessive clobber list? -PFM */
: "memory", "r0", "r1", "r2", "r3", "r4",
"r5", "r6", "r7", "r8", "t", "pr"
);
} else
#endif
__do_IRQ(irq, &regs);
irq_exit();
return 1;
}
#ifdef CONFIG_4KSTACKS
/*
* These should really be __section__(".bss.page_aligned") as well, but
* gcc's 3.0 and earlier don't handle that correctly.
*/
static char softirq_stack[NR_CPUS * THREAD_SIZE]
__attribute__((__aligned__(THREAD_SIZE)));
static char hardirq_stack[NR_CPUS * THREAD_SIZE]
__attribute__((__aligned__(THREAD_SIZE)));
/*
* allocate per-cpu stacks for hardirq and for softirq processing
*/
void irq_ctx_init(int cpu)
{
union irq_ctx *irqctx;
if (hardirq_ctx[cpu])
return;
irqctx = (union irq_ctx *)&hardirq_stack[cpu * THREAD_SIZE];
irqctx->tinfo.task = NULL;
irqctx->tinfo.exec_domain = NULL;
irqctx->tinfo.cpu = cpu;
irqctx->tinfo.preempt_count = HARDIRQ_OFFSET;
irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
hardirq_ctx[cpu] = irqctx;
irqctx = (union irq_ctx *)&softirq_stack[cpu * THREAD_SIZE];
irqctx->tinfo.task = NULL;
irqctx->tinfo.exec_domain = NULL;
irqctx->tinfo.cpu = cpu;
irqctx->tinfo.preempt_count = SOFTIRQ_OFFSET;
irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
softirq_ctx[cpu] = irqctx;
printk("CPU %u irqstacks, hard=%p soft=%p\n",
cpu, hardirq_ctx[cpu], softirq_ctx[cpu]);
}
void irq_ctx_exit(int cpu)
{
hardirq_ctx[cpu] = NULL;
}
extern asmlinkage void __do_softirq(void);
asmlinkage void do_softirq(void)
{
unsigned long flags;
struct thread_info *curctx;
union irq_ctx *irqctx;
u32 *isp;
if (in_interrupt())
return;
local_irq_save(flags);
if (local_softirq_pending()) {
curctx = current_thread_info();
irqctx = softirq_ctx[smp_processor_id()];
irqctx->tinfo.task = curctx->task;
irqctx->tinfo.previous_sp = current_stack_pointer;
/* build the stack frame on the softirq stack */
isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
__asm__ __volatile__ (
"mov r15, r9 \n"
"jsr @%0 \n"
/* switch to the softirq stack */
" mov %1, r15 \n"
/* restore the thread stack */
"mov r9, r15 \n"
: /* no outputs */
: "r" (__do_softirq), "r" (isp)
/* XXX: A somewhat excessive clobber list? -PFM */
: "memory", "r0", "r1", "r2", "r3", "r4",
"r5", "r6", "r7", "r8", "r9", "r15", "t", "pr"
);
}
local_irq_restore(flags);
}
EXPORT_SYMBOL(do_softirq);
#endif