832 lines
23 KiB
C
832 lines
23 KiB
C
![]() |
/*****************************************************************************
|
||
|
* *
|
||
|
* File: subr.c *
|
||
|
* $Revision: 1.12 $ *
|
||
|
* $Date: 2005/03/23 07:41:27 $ *
|
||
|
* Description: *
|
||
|
* Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. *
|
||
|
* part of the Chelsio 10Gb Ethernet Driver. *
|
||
|
* *
|
||
|
* This program is free software; you can redistribute it and/or modify *
|
||
|
* it under the terms of the GNU General Public License, version 2, as *
|
||
|
* published by the Free Software Foundation. *
|
||
|
* *
|
||
|
* You should have received a copy of the GNU General Public License along *
|
||
|
* with this program; if not, write to the Free Software Foundation, Inc., *
|
||
|
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
||
|
* *
|
||
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
|
||
|
* WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
|
||
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
|
||
|
* *
|
||
|
* http://www.chelsio.com *
|
||
|
* *
|
||
|
* Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
|
||
|
* All rights reserved. *
|
||
|
* *
|
||
|
* Maintainers: maintainers@chelsio.com *
|
||
|
* *
|
||
|
* Authors: Dimitrios Michailidis <dm@chelsio.com> *
|
||
|
* Tina Yang <tainay@chelsio.com> *
|
||
|
* Felix Marti <felix@chelsio.com> *
|
||
|
* Scott Bardone <sbardone@chelsio.com> *
|
||
|
* Kurt Ottaway <kottaway@chelsio.com> *
|
||
|
* Frank DiMambro <frank@chelsio.com> *
|
||
|
* *
|
||
|
* History: *
|
||
|
* *
|
||
|
****************************************************************************/
|
||
|
|
||
|
#include "common.h"
|
||
|
#include "elmer0.h"
|
||
|
#include "regs.h"
|
||
|
|
||
|
#include "gmac.h"
|
||
|
#include "cphy.h"
|
||
|
#include "sge.h"
|
||
|
#include "tp.h"
|
||
|
#include "espi.h"
|
||
|
|
||
|
/**
|
||
|
* t1_wait_op_done - wait until an operation is completed
|
||
|
* @adapter: the adapter performing the operation
|
||
|
* @reg: the register to check for completion
|
||
|
* @mask: a single-bit field within @reg that indicates completion
|
||
|
* @polarity: the value of the field when the operation is completed
|
||
|
* @attempts: number of check iterations
|
||
|
* @delay: delay in usecs between iterations
|
||
|
*
|
||
|
* Wait until an operation is completed by checking a bit in a register
|
||
|
* up to @attempts times. Returns %0 if the operation completes and %1
|
||
|
* otherwise.
|
||
|
*/
|
||
|
static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity,
|
||
|
int attempts, int delay)
|
||
|
{
|
||
|
while (1) {
|
||
|
u32 val = t1_read_reg_4(adapter, reg) & mask;
|
||
|
|
||
|
if (!!val == polarity)
|
||
|
return 0;
|
||
|
if (--attempts == 0)
|
||
|
return 1;
|
||
|
if (delay)
|
||
|
udelay(delay);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
#define TPI_ATTEMPTS 50
|
||
|
|
||
|
/*
|
||
|
* Write a register over the TPI interface (unlocked and locked versions).
|
||
|
*/
|
||
|
static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
|
||
|
{
|
||
|
int tpi_busy;
|
||
|
|
||
|
t1_write_reg_4(adapter, A_TPI_ADDR, addr);
|
||
|
t1_write_reg_4(adapter, A_TPI_WR_DATA, value);
|
||
|
t1_write_reg_4(adapter, A_TPI_CSR, F_TPIWR);
|
||
|
|
||
|
tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
|
||
|
TPI_ATTEMPTS, 3);
|
||
|
if (tpi_busy)
|
||
|
CH_ALERT("%s: TPI write to 0x%x failed\n",
|
||
|
adapter->name, addr);
|
||
|
return tpi_busy;
|
||
|
}
|
||
|
|
||
|
int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
TPI_LOCK(adapter);
|
||
|
ret = __t1_tpi_write(adapter, addr, value);
|
||
|
TPI_UNLOCK(adapter);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Read a register over the TPI interface (unlocked and locked versions).
|
||
|
*/
|
||
|
static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
|
||
|
{
|
||
|
int tpi_busy;
|
||
|
|
||
|
t1_write_reg_4(adapter, A_TPI_ADDR, addr);
|
||
|
t1_write_reg_4(adapter, A_TPI_CSR, 0);
|
||
|
|
||
|
tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
|
||
|
TPI_ATTEMPTS, 3);
|
||
|
if (tpi_busy)
|
||
|
CH_ALERT("%s: TPI read from 0x%x failed\n",
|
||
|
adapter->name, addr);
|
||
|
else
|
||
|
*valp = t1_read_reg_4(adapter, A_TPI_RD_DATA);
|
||
|
return tpi_busy;
|
||
|
}
|
||
|
|
||
|
int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
TPI_LOCK(adapter);
|
||
|
ret = __t1_tpi_read(adapter, addr, valp);
|
||
|
TPI_UNLOCK(adapter);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Set a TPI parameter.
|
||
|
*/
|
||
|
static void t1_tpi_par(adapter_t *adapter, u32 value)
|
||
|
{
|
||
|
t1_write_reg_4(adapter, A_TPI_PAR, V_TPIPAR(value));
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Called when a port's link settings change to propagate the new values to the
|
||
|
* associated PHY and MAC. After performing the common tasks it invokes an
|
||
|
* OS-specific handler.
|
||
|
*/
|
||
|
/* static */ void link_changed(adapter_t *adapter, int port_id)
|
||
|
{
|
||
|
int link_ok, speed, duplex, fc;
|
||
|
struct cphy *phy = adapter->port[port_id].phy;
|
||
|
struct link_config *lc = &adapter->port[port_id].link_config;
|
||
|
|
||
|
phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
|
||
|
|
||
|
lc->speed = speed < 0 ? SPEED_INVALID : speed;
|
||
|
lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex;
|
||
|
if (!(lc->requested_fc & PAUSE_AUTONEG))
|
||
|
fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
|
||
|
|
||
|
if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) {
|
||
|
/* Set MAC speed, duplex, and flow control to match PHY. */
|
||
|
struct cmac *mac = adapter->port[port_id].mac;
|
||
|
|
||
|
mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc);
|
||
|
lc->fc = (unsigned char)fc;
|
||
|
}
|
||
|
t1_link_changed(adapter, port_id, link_ok, speed, duplex, fc);
|
||
|
}
|
||
|
|
||
|
static int t1_pci_intr_handler(adapter_t *adapter)
|
||
|
{
|
||
|
u32 pcix_cause;
|
||
|
|
||
|
pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause);
|
||
|
|
||
|
if (pcix_cause) {
|
||
|
pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE,
|
||
|
pcix_cause);
|
||
|
t1_fatal_err(adapter); /* PCI errors are fatal */
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
|
||
|
/*
|
||
|
* Wait until Elmer's MI1 interface is ready for new operations.
|
||
|
*/
|
||
|
static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg)
|
||
|
{
|
||
|
int attempts = 100, busy;
|
||
|
|
||
|
do {
|
||
|
u32 val;
|
||
|
|
||
|
__t1_tpi_read(adapter, mi1_reg, &val);
|
||
|
busy = val & F_MI1_OP_BUSY;
|
||
|
if (busy)
|
||
|
udelay(10);
|
||
|
} while (busy && --attempts);
|
||
|
if (busy)
|
||
|
CH_ALERT("%s: MDIO operation timed out\n",
|
||
|
adapter->name);
|
||
|
return busy;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* MI1 MDIO initialization.
|
||
|
*/
|
||
|
static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi)
|
||
|
{
|
||
|
u32 clkdiv = bi->clock_elmer0 / (2 * bi->mdio_mdc) - 1;
|
||
|
u32 val = F_MI1_PREAMBLE_ENABLE | V_MI1_MDI_INVERT(bi->mdio_mdiinv) |
|
||
|
V_MI1_MDI_ENABLE(bi->mdio_mdien) | V_MI1_CLK_DIV(clkdiv);
|
||
|
|
||
|
if (!(bi->caps & SUPPORTED_10000baseT_Full))
|
||
|
val |= V_MI1_SOF(1);
|
||
|
t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val);
|
||
|
}
|
||
|
|
||
|
static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
|
||
|
int reg_addr, unsigned int *valp)
|
||
|
{
|
||
|
u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
|
||
|
|
||
|
TPI_LOCK(adapter);
|
||
|
|
||
|
/* Write the address we want. */
|
||
|
__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
|
||
|
__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
|
||
|
__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
|
||
|
MI1_OP_INDIRECT_ADDRESS);
|
||
|
mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
|
||
|
|
||
|
/* Write the operation we want. */
|
||
|
__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ);
|
||
|
mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
|
||
|
|
||
|
/* Read the data. */
|
||
|
__t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
|
||
|
TPI_UNLOCK(adapter);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr,
|
||
|
int reg_addr, unsigned int val)
|
||
|
{
|
||
|
u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
|
||
|
|
||
|
TPI_LOCK(adapter);
|
||
|
|
||
|
/* Write the address we want. */
|
||
|
__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
|
||
|
__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
|
||
|
__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
|
||
|
MI1_OP_INDIRECT_ADDRESS);
|
||
|
mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
|
||
|
|
||
|
/* Write the data. */
|
||
|
__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
|
||
|
__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE);
|
||
|
mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
|
||
|
TPI_UNLOCK(adapter);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static struct mdio_ops mi1_mdio_ext_ops = {
|
||
|
mi1_mdio_init,
|
||
|
mi1_mdio_ext_read,
|
||
|
mi1_mdio_ext_write
|
||
|
};
|
||
|
|
||
|
enum {
|
||
|
CH_BRD_N110_1F,
|
||
|
CH_BRD_N210_1F,
|
||
|
CH_BRD_T210_1F,
|
||
|
};
|
||
|
|
||
|
static struct board_info t1_board[] = {
|
||
|
|
||
|
{ CHBT_BOARD_N110, 1/*ports#*/,
|
||
|
SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T1,
|
||
|
CHBT_MAC_PM3393, CHBT_PHY_88X2010,
|
||
|
125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
|
||
|
1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
|
||
|
0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
|
||
|
&t1_mv88x201x_ops, &mi1_mdio_ext_ops,
|
||
|
"Chelsio N110 1x10GBaseX NIC" },
|
||
|
|
||
|
{ CHBT_BOARD_N210, 1/*ports#*/,
|
||
|
SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T2,
|
||
|
CHBT_MAC_PM3393, CHBT_PHY_88X2010,
|
||
|
125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
|
||
|
1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
|
||
|
0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
|
||
|
&t1_mv88x201x_ops, &mi1_mdio_ext_ops,
|
||
|
"Chelsio N210 1x10GBaseX NIC" },
|
||
|
|
||
|
};
|
||
|
|
||
|
struct pci_device_id t1_pci_tbl[] = {
|
||
|
CH_DEVICE(7, 0, CH_BRD_N110_1F),
|
||
|
CH_DEVICE(10, 1, CH_BRD_N210_1F),
|
||
|
{ 0, }
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* Return the board_info structure with a given index. Out-of-range indices
|
||
|
* return NULL.
|
||
|
*/
|
||
|
const struct board_info *t1_get_board_info(unsigned int board_id)
|
||
|
{
|
||
|
return board_id < DIMOF(t1_board) ? &t1_board[board_id] : NULL;
|
||
|
}
|
||
|
|
||
|
struct chelsio_vpd_t {
|
||
|
u32 format_version;
|
||
|
u8 serial_number[16];
|
||
|
u8 mac_base_address[6];
|
||
|
u8 pad[2]; /* make multiple-of-4 size requirement explicit */
|
||
|
};
|
||
|
|
||
|
#define EEPROMSIZE (8 * 1024)
|
||
|
#define EEPROM_MAX_POLL 4
|
||
|
|
||
|
/*
|
||
|
* Read SEEPROM. A zero is written to the flag register when the addres is
|
||
|
* written to the Control register. The hardware device will set the flag to a
|
||
|
* one when 4B have been transferred to the Data register.
|
||
|
*/
|
||
|
int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data)
|
||
|
{
|
||
|
int i = EEPROM_MAX_POLL;
|
||
|
u16 val;
|
||
|
|
||
|
if (addr >= EEPROMSIZE || (addr & 3))
|
||
|
return -EINVAL;
|
||
|
|
||
|
pci_write_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, (u16)addr);
|
||
|
do {
|
||
|
udelay(50);
|
||
|
pci_read_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, &val);
|
||
|
} while (!(val & F_VPD_OP_FLAG) && --i);
|
||
|
|
||
|
if (!(val & F_VPD_OP_FLAG)) {
|
||
|
CH_ERR("%s: reading EEPROM address 0x%x failed\n",
|
||
|
adapter->name, addr);
|
||
|
return -EIO;
|
||
|
}
|
||
|
pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, data);
|
||
|
*data = le32_to_cpu(*data);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int t1_eeprom_vpd_get(adapter_t *adapter, struct chelsio_vpd_t *vpd)
|
||
|
{
|
||
|
int addr, ret = 0;
|
||
|
|
||
|
for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32))
|
||
|
ret = t1_seeprom_read(adapter, addr,
|
||
|
(u32 *)((u8 *)vpd + addr));
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Read a port's MAC address from the VPD ROM.
|
||
|
*/
|
||
|
static int vpd_macaddress_get(adapter_t *adapter, int index, u8 mac_addr[])
|
||
|
{
|
||
|
struct chelsio_vpd_t vpd;
|
||
|
|
||
|
if (t1_eeprom_vpd_get(adapter, &vpd))
|
||
|
return 1;
|
||
|
memcpy(mac_addr, vpd.mac_base_address, 5);
|
||
|
mac_addr[5] = vpd.mac_base_address[5] + index;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Set up the MAC/PHY according to the requested link settings.
|
||
|
*
|
||
|
* If the PHY can auto-negotiate first decide what to advertise, then
|
||
|
* enable/disable auto-negotiation as desired and reset.
|
||
|
*
|
||
|
* If the PHY does not auto-negotiate we just reset it.
|
||
|
*
|
||
|
* If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
|
||
|
* otherwise do it later based on the outcome of auto-negotiation.
|
||
|
*/
|
||
|
int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc)
|
||
|
{
|
||
|
unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
|
||
|
|
||
|
if (lc->supported & SUPPORTED_Autoneg) {
|
||
|
lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE);
|
||
|
if (fc) {
|
||
|
lc->advertising |= ADVERTISED_ASYM_PAUSE;
|
||
|
if (fc == (PAUSE_RX | PAUSE_TX))
|
||
|
lc->advertising |= ADVERTISED_PAUSE;
|
||
|
}
|
||
|
phy->ops->advertise(phy, lc->advertising);
|
||
|
|
||
|
if (lc->autoneg == AUTONEG_DISABLE) {
|
||
|
lc->speed = lc->requested_speed;
|
||
|
lc->duplex = lc->requested_duplex;
|
||
|
lc->fc = (unsigned char)fc;
|
||
|
mac->ops->set_speed_duplex_fc(mac, lc->speed,
|
||
|
lc->duplex, fc);
|
||
|
/* Also disables autoneg */
|
||
|
phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex);
|
||
|
phy->ops->reset(phy, 0);
|
||
|
} else
|
||
|
phy->ops->autoneg_enable(phy); /* also resets PHY */
|
||
|
} else {
|
||
|
mac->ops->set_speed_duplex_fc(mac, -1, -1, fc);
|
||
|
lc->fc = (unsigned char)fc;
|
||
|
phy->ops->reset(phy, 0);
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* External interrupt handler for boards using elmer0.
|
||
|
*/
|
||
|
int elmer0_ext_intr_handler(adapter_t *adapter)
|
||
|
{
|
||
|
struct cphy *phy;
|
||
|
int phy_cause;
|
||
|
u32 cause;
|
||
|
|
||
|
t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);
|
||
|
|
||
|
switch (board_info(adapter)->board) {
|
||
|
case CHBT_BOARD_CHT210:
|
||
|
case CHBT_BOARD_N210:
|
||
|
case CHBT_BOARD_N110:
|
||
|
if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */
|
||
|
phy = adapter->port[0].phy;
|
||
|
phy_cause = phy->ops->interrupt_handler(phy);
|
||
|
if (phy_cause & cphy_cause_link_change)
|
||
|
link_changed(adapter, 0);
|
||
|
}
|
||
|
break;
|
||
|
case CHBT_BOARD_8000:
|
||
|
case CHBT_BOARD_CHT110:
|
||
|
CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
|
||
|
cause);
|
||
|
if (cause & ELMER0_GP_BIT1) { /* PMC3393 INTB */
|
||
|
struct cmac *mac = adapter->port[0].mac;
|
||
|
|
||
|
mac->ops->interrupt_handler(mac);
|
||
|
}
|
||
|
if (cause & ELMER0_GP_BIT5) { /* XPAK MOD_DETECT */
|
||
|
u32 mod_detect;
|
||
|
|
||
|
t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
|
||
|
CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
|
||
|
mod_detect ? "removed" : "inserted");
|
||
|
}
|
||
|
break;
|
||
|
}
|
||
|
t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* Enables all interrupts. */
|
||
|
void t1_interrupts_enable(adapter_t *adapter)
|
||
|
{
|
||
|
unsigned int i;
|
||
|
|
||
|
adapter->slow_intr_mask = F_PL_INTR_SGE_ERR | F_PL_INTR_TP;
|
||
|
|
||
|
t1_sge_intr_enable(adapter->sge);
|
||
|
t1_tp_intr_enable(adapter->tp);
|
||
|
if (adapter->espi) {
|
||
|
adapter->slow_intr_mask |= F_PL_INTR_ESPI;
|
||
|
t1_espi_intr_enable(adapter->espi);
|
||
|
}
|
||
|
|
||
|
/* Enable MAC/PHY interrupts for each port. */
|
||
|
for_each_port(adapter, i) {
|
||
|
adapter->port[i].mac->ops->interrupt_enable(adapter->port[i].mac);
|
||
|
adapter->port[i].phy->ops->interrupt_enable(adapter->port[i].phy);
|
||
|
}
|
||
|
|
||
|
/* Enable PCIX & external chip interrupts on ASIC boards. */
|
||
|
if (t1_is_asic(adapter)) {
|
||
|
u32 pl_intr = t1_read_reg_4(adapter, A_PL_ENABLE);
|
||
|
|
||
|
/* PCI-X interrupts */
|
||
|
pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE,
|
||
|
0xffffffff);
|
||
|
|
||
|
adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
|
||
|
pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
|
||
|
t1_write_reg_4(adapter, A_PL_ENABLE, pl_intr);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* Disables all interrupts. */
|
||
|
void t1_interrupts_disable(adapter_t* adapter)
|
||
|
{
|
||
|
unsigned int i;
|
||
|
|
||
|
t1_sge_intr_disable(adapter->sge);
|
||
|
t1_tp_intr_disable(adapter->tp);
|
||
|
if (adapter->espi)
|
||
|
t1_espi_intr_disable(adapter->espi);
|
||
|
|
||
|
/* Disable MAC/PHY interrupts for each port. */
|
||
|
for_each_port(adapter, i) {
|
||
|
adapter->port[i].mac->ops->interrupt_disable(adapter->port[i].mac);
|
||
|
adapter->port[i].phy->ops->interrupt_disable(adapter->port[i].phy);
|
||
|
}
|
||
|
|
||
|
/* Disable PCIX & external chip interrupts. */
|
||
|
if (t1_is_asic(adapter))
|
||
|
t1_write_reg_4(adapter, A_PL_ENABLE, 0);
|
||
|
|
||
|
/* PCI-X interrupts */
|
||
|
pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0);
|
||
|
|
||
|
adapter->slow_intr_mask = 0;
|
||
|
}
|
||
|
|
||
|
/* Clears all interrupts */
|
||
|
void t1_interrupts_clear(adapter_t* adapter)
|
||
|
{
|
||
|
unsigned int i;
|
||
|
|
||
|
t1_sge_intr_clear(adapter->sge);
|
||
|
t1_tp_intr_clear(adapter->tp);
|
||
|
if (adapter->espi)
|
||
|
t1_espi_intr_clear(adapter->espi);
|
||
|
|
||
|
/* Clear MAC/PHY interrupts for each port. */
|
||
|
for_each_port(adapter, i) {
|
||
|
adapter->port[i].mac->ops->interrupt_clear(adapter->port[i].mac);
|
||
|
adapter->port[i].phy->ops->interrupt_clear(adapter->port[i].phy);
|
||
|
}
|
||
|
|
||
|
/* Enable interrupts for external devices. */
|
||
|
if (t1_is_asic(adapter)) {
|
||
|
u32 pl_intr = t1_read_reg_4(adapter, A_PL_CAUSE);
|
||
|
|
||
|
t1_write_reg_4(adapter, A_PL_CAUSE,
|
||
|
pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX);
|
||
|
}
|
||
|
|
||
|
/* PCI-X interrupts */
|
||
|
pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Slow path interrupt handler for ASICs.
|
||
|
*/
|
||
|
static int asic_slow_intr(adapter_t *adapter)
|
||
|
{
|
||
|
u32 cause = t1_read_reg_4(adapter, A_PL_CAUSE);
|
||
|
|
||
|
cause &= adapter->slow_intr_mask;
|
||
|
if (!cause)
|
||
|
return 0;
|
||
|
if (cause & F_PL_INTR_SGE_ERR)
|
||
|
t1_sge_intr_error_handler(adapter->sge);
|
||
|
if (cause & F_PL_INTR_TP)
|
||
|
t1_tp_intr_handler(adapter->tp);
|
||
|
if (cause & F_PL_INTR_ESPI)
|
||
|
t1_espi_intr_handler(adapter->espi);
|
||
|
if (cause & F_PL_INTR_PCIX)
|
||
|
t1_pci_intr_handler(adapter);
|
||
|
if (cause & F_PL_INTR_EXT)
|
||
|
t1_elmer0_ext_intr(adapter);
|
||
|
|
||
|
/* Clear the interrupts just processed. */
|
||
|
t1_write_reg_4(adapter, A_PL_CAUSE, cause);
|
||
|
(void)t1_read_reg_4(adapter, A_PL_CAUSE); /* flush writes */
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
int t1_slow_intr_handler(adapter_t *adapter)
|
||
|
{
|
||
|
return asic_slow_intr(adapter);
|
||
|
}
|
||
|
|
||
|
/* Power sequencing is a work-around for Intel's XPAKs. */
|
||
|
static void power_sequence_xpak(adapter_t* adapter)
|
||
|
{
|
||
|
u32 mod_detect;
|
||
|
u32 gpo;
|
||
|
|
||
|
/* Check for XPAK */
|
||
|
t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
|
||
|
if (!(ELMER0_GP_BIT5 & mod_detect)) {
|
||
|
/* XPAK is present */
|
||
|
t1_tpi_read(adapter, A_ELMER0_GPO, &gpo);
|
||
|
gpo |= ELMER0_GP_BIT18;
|
||
|
t1_tpi_write(adapter, A_ELMER0_GPO, gpo);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
|
||
|
struct adapter_params *p)
|
||
|
{
|
||
|
p->chip_version = bi->chip_term;
|
||
|
p->is_asic = (p->chip_version != CHBT_TERM_FPGA);
|
||
|
if (p->chip_version == CHBT_TERM_T1 ||
|
||
|
p->chip_version == CHBT_TERM_T2 ||
|
||
|
p->chip_version == CHBT_TERM_FPGA) {
|
||
|
u32 val = t1_read_reg_4(adapter, A_TP_PC_CONFIG);
|
||
|
|
||
|
val = G_TP_PC_REV(val);
|
||
|
if (val == 2)
|
||
|
p->chip_revision = TERM_T1B;
|
||
|
else if (val == 3)
|
||
|
p->chip_revision = TERM_T2;
|
||
|
else
|
||
|
return -1;
|
||
|
} else
|
||
|
return -1;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Enable board components other than the Chelsio chip, such as external MAC
|
||
|
* and PHY.
|
||
|
*/
|
||
|
static int board_init(adapter_t *adapter, const struct board_info *bi)
|
||
|
{
|
||
|
switch (bi->board) {
|
||
|
case CHBT_BOARD_8000:
|
||
|
case CHBT_BOARD_N110:
|
||
|
case CHBT_BOARD_N210:
|
||
|
case CHBT_BOARD_CHT210:
|
||
|
case CHBT_BOARD_COUGAR:
|
||
|
t1_tpi_par(adapter, 0xf);
|
||
|
t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
|
||
|
break;
|
||
|
case CHBT_BOARD_CHT110:
|
||
|
t1_tpi_par(adapter, 0xf);
|
||
|
t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800);
|
||
|
|
||
|
/* TBD XXX Might not need. This fixes a problem
|
||
|
* described in the Intel SR XPAK errata.
|
||
|
*/
|
||
|
power_sequence_xpak(adapter);
|
||
|
break;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Initialize and configure the Terminator HW modules. Note that external
|
||
|
* MAC and PHYs are initialized separately.
|
||
|
*/
|
||
|
int t1_init_hw_modules(adapter_t *adapter)
|
||
|
{
|
||
|
int err = -EIO;
|
||
|
const struct board_info *bi = board_info(adapter);
|
||
|
|
||
|
if (!adapter->mc4) {
|
||
|
u32 val = t1_read_reg_4(adapter, A_MC4_CFG);
|
||
|
|
||
|
t1_write_reg_4(adapter, A_MC4_CFG, val | F_READY | F_MC4_SLOW);
|
||
|
t1_write_reg_4(adapter, A_MC5_CONFIG,
|
||
|
F_M_BUS_ENABLE | F_TCAM_RESET);
|
||
|
}
|
||
|
|
||
|
if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac,
|
||
|
bi->espi_nports))
|
||
|
goto out_err;
|
||
|
|
||
|
if (t1_tp_reset(adapter->tp, &adapter->params.tp, bi->clock_core))
|
||
|
goto out_err;
|
||
|
|
||
|
err = t1_sge_configure(adapter->sge, &adapter->params.sge);
|
||
|
if (err)
|
||
|
goto out_err;
|
||
|
|
||
|
err = 0;
|
||
|
out_err:
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Determine a card's PCI mode.
|
||
|
*/
|
||
|
static void __devinit get_pci_mode(adapter_t *adapter, struct pci_params *p)
|
||
|
{
|
||
|
static unsigned short speed_map[] = { 33, 66, 100, 133 };
|
||
|
u32 pci_mode;
|
||
|
|
||
|
pci_read_config_dword(adapter->pdev, A_PCICFG_MODE, &pci_mode);
|
||
|
p->speed = speed_map[G_PCI_MODE_CLK(pci_mode)];
|
||
|
p->width = (pci_mode & F_PCI_MODE_64BIT) ? 64 : 32;
|
||
|
p->is_pcix = (pci_mode & F_PCI_MODE_PCIX) != 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Release the structures holding the SW per-Terminator-HW-module state.
|
||
|
*/
|
||
|
void t1_free_sw_modules(adapter_t *adapter)
|
||
|
{
|
||
|
unsigned int i;
|
||
|
|
||
|
for_each_port(adapter, i) {
|
||
|
struct cmac *mac = adapter->port[i].mac;
|
||
|
struct cphy *phy = adapter->port[i].phy;
|
||
|
|
||
|
if (mac)
|
||
|
mac->ops->destroy(mac);
|
||
|
if (phy)
|
||
|
phy->ops->destroy(phy);
|
||
|
}
|
||
|
|
||
|
if (adapter->sge)
|
||
|
t1_sge_destroy(adapter->sge);
|
||
|
if (adapter->tp)
|
||
|
t1_tp_destroy(adapter->tp);
|
||
|
if (adapter->espi)
|
||
|
t1_espi_destroy(adapter->espi);
|
||
|
}
|
||
|
|
||
|
static void __devinit init_link_config(struct link_config *lc,
|
||
|
const struct board_info *bi)
|
||
|
{
|
||
|
lc->supported = bi->caps;
|
||
|
lc->requested_speed = lc->speed = SPEED_INVALID;
|
||
|
lc->requested_duplex = lc->duplex = DUPLEX_INVALID;
|
||
|
lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
|
||
|
if (lc->supported & SUPPORTED_Autoneg) {
|
||
|
lc->advertising = lc->supported;
|
||
|
lc->autoneg = AUTONEG_ENABLE;
|
||
|
lc->requested_fc |= PAUSE_AUTONEG;
|
||
|
} else {
|
||
|
lc->advertising = 0;
|
||
|
lc->autoneg = AUTONEG_DISABLE;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
|
||
|
/*
|
||
|
* Allocate and initialize the data structures that hold the SW state of
|
||
|
* the Terminator HW modules.
|
||
|
*/
|
||
|
int __devinit t1_init_sw_modules(adapter_t *adapter,
|
||
|
const struct board_info *bi)
|
||
|
{
|
||
|
unsigned int i;
|
||
|
|
||
|
adapter->params.brd_info = bi;
|
||
|
adapter->params.nports = bi->port_number;
|
||
|
adapter->params.stats_update_period = bi->gmac->stats_update_period;
|
||
|
|
||
|
adapter->sge = t1_sge_create(adapter, &adapter->params.sge);
|
||
|
if (!adapter->sge) {
|
||
|
CH_ERR("%s: SGE initialization failed\n",
|
||
|
adapter->name);
|
||
|
goto error;
|
||
|
}
|
||
|
|
||
|
|
||
|
|
||
|
if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) {
|
||
|
CH_ERR("%s: ESPI initialization failed\n",
|
||
|
adapter->name);
|
||
|
goto error;
|
||
|
}
|
||
|
|
||
|
adapter->tp = t1_tp_create(adapter, &adapter->params.tp);
|
||
|
if (!adapter->tp) {
|
||
|
CH_ERR("%s: TP initialization failed\n",
|
||
|
adapter->name);
|
||
|
goto error;
|
||
|
}
|
||
|
|
||
|
board_init(adapter, bi);
|
||
|
bi->mdio_ops->init(adapter, bi);
|
||
|
if (bi->gphy->reset)
|
||
|
bi->gphy->reset(adapter);
|
||
|
if (bi->gmac->reset)
|
||
|
bi->gmac->reset(adapter);
|
||
|
|
||
|
for_each_port(adapter, i) {
|
||
|
u8 hw_addr[6];
|
||
|
struct cmac *mac;
|
||
|
int phy_addr = bi->mdio_phybaseaddr + i;
|
||
|
|
||
|
adapter->port[i].phy = bi->gphy->create(adapter, phy_addr,
|
||
|
bi->mdio_ops);
|
||
|
if (!adapter->port[i].phy) {
|
||
|
CH_ERR("%s: PHY %d initialization failed\n",
|
||
|
adapter->name, i);
|
||
|
goto error;
|
||
|
}
|
||
|
|
||
|
adapter->port[i].mac = mac = bi->gmac->create(adapter, i);
|
||
|
if (!mac) {
|
||
|
CH_ERR("%s: MAC %d initialization failed\n",
|
||
|
adapter->name, i);
|
||
|
goto error;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Get the port's MAC addresses either from the EEPROM if one
|
||
|
* exists or the one hardcoded in the MAC.
|
||
|
*/
|
||
|
if (!t1_is_asic(adapter) || bi->chip_mac == CHBT_MAC_DUMMY)
|
||
|
mac->ops->macaddress_get(mac, hw_addr);
|
||
|
else if (vpd_macaddress_get(adapter, i, hw_addr)) {
|
||
|
CH_ERR("%s: could not read MAC address from VPD ROM\n",
|
||
|
port_name(adapter, i));
|
||
|
goto error;
|
||
|
}
|
||
|
t1_set_hw_addr(adapter, i, hw_addr);
|
||
|
init_link_config(&adapter->port[i].link_config, bi);
|
||
|
}
|
||
|
|
||
|
get_pci_mode(adapter, &adapter->params.pci);
|
||
|
t1_interrupts_clear(adapter);
|
||
|
return 0;
|
||
|
|
||
|
error:
|
||
|
t1_free_sw_modules(adapter);
|
||
|
return -1;
|
||
|
}
|