q3k
/
linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux/drivers/usb/core/usb.h

165 lines
5.0 KiB
C
Raw Normal View History

USB: Enhance usage of pm_message_t This patch (as1177) modifies the USB core suspend and resume routines. The resume functions now will take a pm_message_t argument, so they will know what sort of resume is occurring. The new argument is also passed to the port suspend/resume and bus suspend/resume routines (although they don't use it for anything but debugging). In addition, special pm_message_t values are used for user-initiated, device-initiated (i.e., remote wakeup), and automatic suspend/resume. By testing these values, drivers can tell whether or not a particular suspend was an autosuspend. Unfortunately, they can't do the same for resumes -- not until the pm_message_t argument is also passed to the drivers' resume methods. That will require a bigger change. IMO, the whole Power Management framework should have been set up this way in the first place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-25 21:39:18 +00:00
#include <linux/pm.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Functions local to drivers/usb/core/ */
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-30 23:21:33 +00:00
extern int usb_create_sysfs_dev_files(struct usb_device *dev);
extern void usb_remove_sysfs_dev_files(struct usb_device *dev);
usb: core: Change usb_create_sysfs_intf_files()' return type to void The usb_create_sysfs_intf_files() function always returned zero even if it failed to create sysfs fails. Since this is a desired behaviour there is no need to return return code at all. This commit changes function's return type (form int) to void. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-14 15:47:09 +00:00
extern void usb_create_sysfs_intf_files(struct usb_interface *intf);
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-30 23:21:33 +00:00
extern void usb_remove_sysfs_intf_files(struct usb_interface *intf);
USB: utilize the bus notifiers This patch (as1185) makes usbcore take advantage of the bus notifications sent out by the driver core. Now we can create all our device and interface attribute files before the device or interface uevent is broadcast. A side effect is that we no longer create the endpoint "pseudo" devices at the same time as a device or interface is registered -- it seems like a bad idea to try registering an endpoint before the registration of its parent is complete. So the routines for creating and removing endpoint devices have been split out and renamed, and they are called explicitly when needed. A new bitflag is used for keeping track of whether or not the interface's endpoint devices have been created, since (just as with the interface attributes) they vary with the altsetting and hence can be changed at random times. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-05 19:10:34 +00:00
extern int usb_create_ep_devs(struct device *parent,
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-30 23:21:33 +00:00
struct usb_host_endpoint *endpoint,
[PATCH] USB: move the endpoint specific sysfs code to it's own file This makes it easier to modify in the future without touching anything else. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-14 19:14:34 +00:00
struct usb_device *udev);
USB: utilize the bus notifiers This patch (as1185) makes usbcore take advantage of the bus notifications sent out by the driver core. Now we can create all our device and interface attribute files before the device or interface uevent is broadcast. A side effect is that we no longer create the endpoint "pseudo" devices at the same time as a device or interface is registered -- it seems like a bad idea to try registering an endpoint before the registration of its parent is complete. So the routines for creating and removing endpoint devices have been split out and renamed, and they are called explicitly when needed. A new bitflag is used for keeping track of whether or not the interface's endpoint devices have been created, since (just as with the interface attributes) they vary with the altsetting and hence can be changed at random times. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-05 19:10:34 +00:00
extern void usb_remove_ep_devs(struct usb_host_endpoint *endpoint);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: add ep->enable This patch (as944) adds an explicit "enabled" field to the usb_host_endpoint structure and uses it in place of the current mechanism. This is merely a time-space tradeoff; it makes checking whether URBs may be submitted to an endpoint simpler. The existing mechanism is efficient when converting urb->pipe to an endpoint pointer, but it's not so efficient when urb->ep is used instead. As a side effect, the procedure for enabling an endpoint is now a little more complicated. The ad-hoc inline code in usb.c and hub.c for enabling ep0 is now replaced with calls to usb_enable_endpoint, which is no longer static. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30 21:05:22 +00:00
extern void usb_enable_endpoint(struct usb_device *dev,
USB: re-enable interface after driver unbinds This patch (as1197) fixes an error introduced recently. Since a significant number of devices can't handle Set-Interface requests, we no longer call usb_set_interface() when a driver unbinds from an interface, provided the interface is already in altsetting 0. However the interface still does get disabled, and the call to usb_set_interface() was the only thing re-enabling it. Since the interface doesn't get re-enabled, further attempts to use it fail. So the patch adds a call to usb_enable_interface() when a driver unbinds and the interface is in altsetting 0. For this to work right, the interface's endpoints have to be re-enabled but their toggles have to be left alone. Therefore an additional argument is added to usb_enable_endpoint() and usb_enable_interface(), a flag indicating whether or not the endpoint toggles should be reset. This is a forward-ported version of a patch which fixes Bugzilla #12301. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: David Roka <roka@dawid.hu> Reported-by: Erik Ekman <erik@kryo.se> Tested-by: Erik Ekman <erik@kryo.se> Tested-by: Alon Bar-Lev <alon.barlev@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-31 16:31:33 +00:00
struct usb_host_endpoint *ep, bool reset_toggle);
extern void usb_enable_interface(struct usb_device *dev,
struct usb_interface *intf, bool reset_toggles);
USB: fix toggle mismatch in disable_endpoint paths This patch (as1200) finishes some fixes that were left incomplete by an earlier patch. Although nobody has addressed this issue in the past, it turns out that we need to distinguish between two different modes of disabling and enabling endpoints. In one mode only the data structures in usbcore are affected, and in the other mode the host controller and device hardware states are affected as well. The earlier patch added an extra argument to the routines in the enable_endpoint pathways to reflect this difference. This patch adds corresponding arguments to the disable_endpoint pathways. Without this change, the endpoint toggle state can get out of sync between the host and the device. The exact mechanism depends on the details of the host controller (whether or not it stores its own copy of the toggle values). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Dan Streetman <ddstreet@ieee.org> Tested-by: Dan Streetman <ddstreet@ieee.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-15 22:03:33 +00:00
extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
bool reset_hardware);
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-30 23:21:33 +00:00
extern void usb_disable_interface(struct usb_device *dev,
USB: fix toggle mismatch in disable_endpoint paths This patch (as1200) finishes some fixes that were left incomplete by an earlier patch. Although nobody has addressed this issue in the past, it turns out that we need to distinguish between two different modes of disabling and enabling endpoints. In one mode only the data structures in usbcore are affected, and in the other mode the host controller and device hardware states are affected as well. The earlier patch added an extra argument to the routines in the enable_endpoint pathways to reflect this difference. This patch adds corresponding arguments to the disable_endpoint pathways. Without this change, the endpoint toggle state can get out of sync between the host and the device. The exact mechanism depends on the details of the host controller (whether or not it stores its own copy of the toggle values). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Dan Streetman <ddstreet@ieee.org> Tested-by: Dan Streetman <ddstreet@ieee.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-15 22:03:33 +00:00
struct usb_interface *intf, bool reset_hardware);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern void usb_release_interface_cache(struct kref *ref);
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-30 23:21:33 +00:00
extern void usb_disable_device(struct usb_device *dev, int skip_ep0);
extern int usb_deauthorize_device(struct usb_device *);
extern int usb_authorize_device(struct usb_device *);
USB: add a blacklist for devices that can't handle some things we throw at them. This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 13:26:21 +00:00
extern void usb_detect_quirks(struct usb_device *udev);
USB: add a "remove hardware" sysfs attribute This patch (as1297) adds a "remove" attribute to each USB device's directory in sysfs. Writing to this attribute causes the device to be deconfigured (the same as writing 0 to the "bConfigurationValue" attribute) and then tells the hub driver to disable the device's upstream port. The device remains locked during these activities so there is no possibility of it getting reconfigured in between. The port will remain disabled until after the device is unplugged. The purpose of this is to provide a means for user programs to imitate the "Safely remove hardware" applet in Windows. Some devices do expect their ports to be disabled before they are unplugged, and they provide visual feedback to users indicating when they can safely be unplugged. The security implications are minimal. Writing to the "remove" attribute is no more dangerous than writing to the "bConfigurationValue" attribute. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Zeuthen <davidz@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-27 19:20:13 +00:00
extern int usb_remove_device(struct usb_device *udev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern int usb_get_device_descriptor(struct usb_device *dev,
unsigned int size);
[PATCH] usbcore: Fix handling of sysfs strings and other attributes This patch (as592) makes a few small improvements to the way device strings are handled, and it fixes some bugs in a couple of other sysfs attribute routines. (Look at show_configuration_string() to see what I mean.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-24 20:24:14 +00:00
extern char *usb_cache_string(struct usb_device *udev, int index);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern int usb_set_configuration(struct usb_device *dev, int configuration);
USB: rename choose_configuration As it is global, give it a usb specific name in the global namespace. Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 04:44:27 +00:00
extern int usb_choose_configuration(struct usb_device *udev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern void usb_kick_khubd(struct usb_device *dev);
USB: refactor usb device matching and create usb_device_match This is needed for the quirk match code. Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 13:26:21 +00:00
extern int usb_match_device(struct usb_device *dev,
const struct usb_device_id *id);
USB: Force unbinding of drivers lacking reset_resume or other methods This patch (as1024) takes care of a FIXME issue: Drivers that don't have the necessary suspend, resume, reset_resume, pre_reset, or post_reset methods will be unbound and their interface reprobed when one of the unsupported events occurs. This is made slightly more difficult by the fact that bind operations won't work during a system sleep transition. So instead the code has to defer the operation until the transition ends. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-23 20:00:40 +00:00
extern void usb_forced_unbind_intf(struct usb_interface *intf);
extern void usb_rebind_intf(struct usb_interface *intf);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: add API for userspace drivers to "claim" ports This patch (as1258) implements a feature that users have been asking for: It gives programs the ability to "claim" a port on a hub, via a new usbfs ioctl. A device plugged into a "claimed" port will not be touched by the kernel beyond the immediate necessities of initialization and enumeration. In particular, when a device is plugged into a "claimed" port, the kernel will not select and install a configuration. And when a config is installed by usbfs or sysfs, the kernel will not probe any drivers for any of the interfaces. (However the kernel will fetch various string descriptors during enumeration. One could argue that this isn't really necessary, but the strings are exported in sysfs.) The patch does not guarantee exclusive access to these devices; it is still possible for more than one program to open the device file concurrently. Programs are responsible for coordinating access among themselves. A demonstration program showing how to use the new interface can be found in an attachment to http://marc.info/?l=linux-usb&m=124345857431452&w=2 The patch also makes a small simplification to the hub driver, replacing a bunch of more-or-less useless variants of "out of memory" with a single message. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-29 14:56:54 +00:00
extern int usb_hub_claim_port(struct usb_device *hdev, unsigned port,
void *owner);
extern int usb_hub_release_port(struct usb_device *hdev, unsigned port,
void *owner);
extern void usb_hub_release_all_ports(struct usb_device *hdev, void *owner);
extern bool usb_device_is_owned(struct usb_device *udev);
[PATCH] USB: fix up some sparse warnings about static functions that aren't static. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/core/usb.h ===================================================================
2005-04-19 00:39:24 +00:00
extern int usb_hub_init(void);
extern void usb_hub_cleanup(void);
extern int usb_major_init(void);
extern void usb_major_cleanup(void);
hub driver: improve use of #ifdef This patch (as736) makes the hub driver more readable by improving the usage of "#ifdef CONFIG_PM" and "#ifdef CONFIG_USB_SUSPEND". Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-02 02:14:24 +00:00
#ifdef CONFIG_PM
USB: Add new PM callback methods for USB This patch (as1129) adds support for the new PM callbacks to usbcore. The new callbacks merely invoke the same old USB power management routines as the old ones did. A minor improvement is that the callbacks are present only in the "USB-device" device_type structure, rather than in the bus_type structure. This way they will be invoked only for USB devices, not for USB interfaces. The core USB PM routines automatically handle suspending and resuming interfaces along with their devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-12 18:34:10 +00:00
extern int usb_suspend(struct device *dev, pm_message_t msg);
USB: Enhance usage of pm_message_t This patch (as1177) modifies the USB core suspend and resume routines. The resume functions now will take a pm_message_t argument, so they will know what sort of resume is occurring. The new argument is also passed to the port suspend/resume and bus suspend/resume routines (although they don't use it for anything but debugging). In addition, special pm_message_t values are used for user-initiated, device-initiated (i.e., remote wakeup), and automatic suspend/resume. By testing these values, drivers can tell whether or not a particular suspend was an autosuspend. Unfortunately, they can't do the same for resumes -- not until the pm_message_t argument is also passed to the drivers' resume methods. That will require a bigger change. IMO, the whole Power Management framework should have been set up this way in the first place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-25 21:39:18 +00:00
extern int usb_resume(struct device *dev, pm_message_t msg);
USB: Add new PM callback methods for USB This patch (as1129) adds support for the new PM callbacks to usbcore. The new callbacks merely invoke the same old USB power management routines as the old ones did. A minor improvement is that the callbacks are present only in the "USB-device" device_type structure, rather than in the bus_type structure. This way they will be invoked only for USB devices, not for USB interfaces. The core USB PM routines automatically handle suspending and resuming interfaces along with their devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-12 18:34:10 +00:00
USB: Enhance usage of pm_message_t This patch (as1177) modifies the USB core suspend and resume routines. The resume functions now will take a pm_message_t argument, so they will know what sort of resume is occurring. The new argument is also passed to the port suspend/resume and bus suspend/resume routines (although they don't use it for anything but debugging). In addition, special pm_message_t values are used for user-initiated, device-initiated (i.e., remote wakeup), and automatic suspend/resume. By testing these values, drivers can tell whether or not a particular suspend was an autosuspend. Unfortunately, they can't do the same for resumes -- not until the pm_message_t argument is also passed to the drivers' resume methods. That will require a bigger change. IMO, the whole Power Management framework should have been set up this way in the first place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-25 21:39:18 +00:00
extern int usb_port_suspend(struct usb_device *dev, pm_message_t msg);
extern int usb_port_resume(struct usb_device *dev, pm_message_t msg);
USB: fix autosuspend when CONFIG_PM isn't set This patch (as791b) fixes things up to avoid compiler warnings or errors when CONFIG_USB_SUSPEND or CONFIG_PM isn't set. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26 18:50:20 +00:00
hub driver: improve use of #ifdef This patch (as736) makes the hub driver more readable by improving the usage of "#ifdef CONFIG_PM" and "#ifdef CONFIG_USB_SUSPEND". Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-02 02:14:24 +00:00
#else
USB: Enhance usage of pm_message_t This patch (as1177) modifies the USB core suspend and resume routines. The resume functions now will take a pm_message_t argument, so they will know what sort of resume is occurring. The new argument is also passed to the port suspend/resume and bus suspend/resume routines (although they don't use it for anything but debugging). In addition, special pm_message_t values are used for user-initiated, device-initiated (i.e., remote wakeup), and automatic suspend/resume. By testing these values, drivers can tell whether or not a particular suspend was an autosuspend. Unfortunately, they can't do the same for resumes -- not until the pm_message_t argument is also passed to the drivers' resume methods. That will require a bigger change. IMO, the whole Power Management framework should have been set up this way in the first place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-25 21:39:18 +00:00
static inline int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
USB: remove __usb_port_suspend This patch (as915b) combines the public routine usb_port_suspend() and the private routine __usb_port_suspend() into a single function. By removing the explicit mention of otg_port in the call to __usb_port_suspend(), we prevent a possible error in which the system tries to perform HNP on the wrong port when a non-targeted device is plugged into a non-OTG port. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-30 20:51:28 +00:00
{
return 0;
}
USB: Enhance usage of pm_message_t This patch (as1177) modifies the USB core suspend and resume routines. The resume functions now will take a pm_message_t argument, so they will know what sort of resume is occurring. The new argument is also passed to the port suspend/resume and bus suspend/resume routines (although they don't use it for anything but debugging). In addition, special pm_message_t values are used for user-initiated, device-initiated (i.e., remote wakeup), and automatic suspend/resume. By testing these values, drivers can tell whether or not a particular suspend was an autosuspend. Unfortunately, they can't do the same for resumes -- not until the pm_message_t argument is also passed to the drivers' resume methods. That will require a bigger change. IMO, the whole Power Management framework should have been set up this way in the first place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-25 21:39:18 +00:00
static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg)
USB: remove __usb_port_suspend This patch (as915b) combines the public routine usb_port_suspend() and the private routine __usb_port_suspend() into a single function. By removing the explicit mention of otg_port in the call to __usb_port_suspend(), we prevent a possible error in which the system tries to perform HNP on the wrong port when a non-targeted device is plugged into a non-OTG port. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-30 20:51:28 +00:00
{
return 0;
}
hub driver: improve use of #ifdef This patch (as736) makes the hub driver more readable by improving the usage of "#ifdef CONFIG_PM" and "#ifdef CONFIG_USB_SUSPEND". Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-02 02:14:24 +00:00
#endif
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 19:47:02 +00:00
#ifdef CONFIG_USB_SUSPEND
usbcore: remove unused argument in autosuspend Thanks to several earlier patches, usb_autosuspend_device() and usb_autoresume_device() are never called with a second argument other than 1. This patch (as819) removes the now-redundant argument. It also consolidates some common code between those two routines, putting it into a new subroutine called usb_autopm_do_device(). And it includes a sizable kerneldoc update for the affected functions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-20 16:38:46 +00:00
extern void usb_autosuspend_device(struct usb_device *udev);
extern int usb_autoresume_device(struct usb_device *udev);
USB: convert to the runtime PM framework This patch (as1329) converts the USB stack over to the PM core's runtime PM framework. This involves numerous changes throughout usbcore, especially to hub.c and driver.c. Perhaps the most notable change is that CONFIG_USB_SUSPEND now depends on CONFIG_PM_RUNTIME instead of CONFIG_PM. Several fields in the usb_device and usb_interface structures are no longer needed. Some code which used to depend on CONFIG_USB_PM now depends on CONFIG_USB_SUSPEND (requiring some rearrangement of header files). The only visible change in behavior should be that following a system sleep (resume from RAM or resume from hibernation), autosuspended USB devices will be resumed just like everything else. They won't remain suspended. But if they aren't in use then they will naturally autosuspend again in a few seconds. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-08 17:57:28 +00:00
extern int usb_remote_wakeup(struct usb_device *dev);
USB: Move runtime PM callbacks to usb_device_pm_ops USB defines usb_device_type pointing to usb_device_pm_ops that provides system-wide PM callbacks only and usb_bus_type pointing to usb_bus_pm_ops that provides runtime PM callbacks only. However, the USB runtime PM callbacks may be defined in usb_device_pm_ops which makes it possible to drop usb_bus_pm_ops and will allow us to consolidate the handling of subsystems by the PM core code. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-18 18:55:36 +00:00
extern int usb_runtime_suspend(struct device *dev);
extern int usb_runtime_resume(struct device *dev);
extern int usb_runtime_idle(struct device *dev);
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 19:47:02 +00:00
#else
USB: export autosuspend delay in sysfs This patch (as861) adds sysfs attributes to expose the autosuspend delay value for each USB device. If the user changes the delay from 0 (no autosuspend) to a positive value, an autosuspend is attempted. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-20 20:03:32 +00:00
#define usb_autosuspend_device(udev) do {} while (0)
usbcore: remove unused argument in autosuspend Thanks to several earlier patches, usb_autosuspend_device() and usb_autoresume_device() are never called with a second argument other than 1. This patch (as819) removes the now-redundant argument. It also consolidates some common code between those two routines, putting it into a new subroutine called usb_autopm_do_device(). And it includes a sizable kerneldoc update for the affected functions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-20 16:38:46 +00:00
static inline int usb_autoresume_device(struct usb_device *udev)
USB: fix autosuspend when CONFIG_PM isn't set This patch (as791b) fixes things up to avoid compiler warnings or errors when CONFIG_USB_SUSPEND or CONFIG_PM isn't set. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26 18:50:20 +00:00
{
return 0;
}
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 19:47:02 +00:00
USB: convert to the runtime PM framework This patch (as1329) converts the USB stack over to the PM core's runtime PM framework. This involves numerous changes throughout usbcore, especially to hub.c and driver.c. Perhaps the most notable change is that CONFIG_USB_SUSPEND now depends on CONFIG_PM_RUNTIME instead of CONFIG_PM. Several fields in the usb_device and usb_interface structures are no longer needed. Some code which used to depend on CONFIG_USB_PM now depends on CONFIG_USB_SUSPEND (requiring some rearrangement of header files). The only visible change in behavior should be that following a system sleep (resume from RAM or resume from hibernation), autosuspended USB devices will be resumed just like everything else. They won't remain suspended. But if they aren't in use then they will naturally autosuspend again in a few seconds. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-08 17:57:28 +00:00
static inline int usb_remote_wakeup(struct usb_device *udev)
{
return 0;
}
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 19:47:02 +00:00
#endif
usbcore: move code among source files This revised patch (as713b) moves a few routines among source files in usbcore. Some driver-related code in usb.c (claiming interfaces and matching IDs) is moved to driver.c, where it belongs. Also the usb_generic stuff in driver.c is moved to a new source file: generic.c. (That's the reason for revising the patch.) Although not very big now, it will get bigger in a later patch. None of the code has been changed; it has only been re-arranged. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-02 02:08:06 +00:00
extern struct bus_type usb_bus_type;
USB: make usbdevices export their device nodes instead of using a separate class o The "real" usb-devices export now a device node which can populate /dev/bus/usb. o The usb_device class is optional now and can be disabled in the kernel config. Major/minor of the "real" devices and class devices are the same. o The environment of the usb-device event contains DEVNUM and BUSNUM to help udev and get rid of the ugly udev rule we need for the class devices. o The usb-devices and usb-interfaces share the same bus, so I used the new "struct device_type" to let these devices identify themselves. This also removes the current logic of using a magic platform-pointer. The name of the device_type is also added to the environment which makes it easier to distinguish the different kinds of devices on the same subsystem. It looks like this: add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1 SUBSYSTEM=usb SEQNUM=1533 MAJOR=189 MINOR=131 DEVTYPE=usb_device PRODUCT=46d/c03e/2000 TYPE=0/0/0 BUSNUM=002 DEVNUM=004 This udev rule works as a replacement for usb_device class devices: SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \ NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0644" Updated patch, which needs the device_type patches in Greg's tree. I also got a bugzilla assigned for this. :) https://bugzilla.novell.com/show_bug.cgi?id=250659 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-13 14:59:31 +00:00
extern struct device_type usb_device_type;
extern struct device_type usb_if_device_type;
usb: convert endpoint devices to bus-less childs of the usb interface The endpoint devices look like simple attribute groups now, and no longer like devices with a specific subsystem. They will also no longer emit uevents. It also removes the device node requests for endpoint devices, which are not implemented for now. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-04 17:48:32 +00:00
extern struct device_type usb_ep_device_type;
usbcore: add usb_device_driver definition This patch (as732) adds a usb_device_driver structure, for representing drivers that manage an entire USB device as opposed to just an interface. Support routines like usb_register_device_driver, usb_deregister_device_driver, usb_probe_device, and usb_unbind_device are also added. Unlike an earlier version of this patch, the new code is type-safe. To accomplish this, the existing struct driver embedded in struct usb_driver had to be wrapped in an intermediate wrapper. This enables the core to tell at runtime whether a particular struct driver belongs to a device driver or to an interface driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-02 02:08:49 +00:00
extern struct usb_device_driver usb_generic_driver;
USB core: Use const where possible. This patch marks some USB core's functions parameters as const. This improves the design (we're saying to the caller that its parameter is not going to be modified) and may help in compiler's optimisation work. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-27 02:48:11 +00:00
static inline int is_usb_device(const struct device *dev)
usbcore: add usb_device_driver definition This patch (as732) adds a usb_device_driver structure, for representing drivers that manage an entire USB device as opposed to just an interface. Support routines like usb_register_device_driver, usb_deregister_device_driver, usb_probe_device, and usb_unbind_device are also added. Unlike an earlier version of this patch, the new code is type-safe. To accomplish this, the existing struct driver embedded in struct usb_driver had to be wrapped in an intermediate wrapper. This enables the core to tell at runtime whether a particular struct driver belongs to a device driver or to an interface driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-02 02:08:49 +00:00
{
USB: make usbdevices export their device nodes instead of using a separate class o The "real" usb-devices export now a device node which can populate /dev/bus/usb. o The usb_device class is optional now and can be disabled in the kernel config. Major/minor of the "real" devices and class devices are the same. o The environment of the usb-device event contains DEVNUM and BUSNUM to help udev and get rid of the ugly udev rule we need for the class devices. o The usb-devices and usb-interfaces share the same bus, so I used the new "struct device_type" to let these devices identify themselves. This also removes the current logic of using a magic platform-pointer. The name of the device_type is also added to the environment which makes it easier to distinguish the different kinds of devices on the same subsystem. It looks like this: add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1 SUBSYSTEM=usb SEQNUM=1533 MAJOR=189 MINOR=131 DEVTYPE=usb_device PRODUCT=46d/c03e/2000 TYPE=0/0/0 BUSNUM=002 DEVNUM=004 This udev rule works as a replacement for usb_device class devices: SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \ NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0644" Updated patch, which needs the device_type patches in Greg's tree. I also got a bugzilla assigned for this. :) https://bugzilla.novell.com/show_bug.cgi?id=250659 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-13 14:59:31 +00:00
return dev->type == &usb_device_type;
usbcore: add usb_device_driver definition This patch (as732) adds a usb_device_driver structure, for representing drivers that manage an entire USB device as opposed to just an interface. Support routines like usb_register_device_driver, usb_deregister_device_driver, usb_probe_device, and usb_unbind_device are also added. Unlike an earlier version of this patch, the new code is type-safe. To accomplish this, the existing struct driver embedded in struct usb_driver had to be wrapped in an intermediate wrapper. This enables the core to tell at runtime whether a particular struct driver belongs to a device driver or to an interface driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-02 02:08:49 +00:00
}
usb: convert endpoint devices to bus-less childs of the usb interface The endpoint devices look like simple attribute groups now, and no longer like devices with a specific subsystem. They will also no longer emit uevents. It also removes the device node requests for endpoint devices, which are not implemented for now. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-04 17:48:32 +00:00
static inline int is_usb_interface(const struct device *dev)
{
return dev->type == &usb_if_device_type;
}
static inline int is_usb_endpoint(const struct device *dev)
{
return dev->type == &usb_ep_device_type;
}
usbcore: add usb_device_driver definition This patch (as732) adds a usb_device_driver structure, for representing drivers that manage an entire USB device as opposed to just an interface. Support routines like usb_register_device_driver, usb_deregister_device_driver, usb_probe_device, and usb_unbind_device are also added. Unlike an earlier version of this patch, the new code is type-safe. To accomplish this, the existing struct driver embedded in struct usb_driver had to be wrapped in an intermediate wrapper. This enables the core to tell at runtime whether a particular struct driver belongs to a device driver or to an interface driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-02 02:08:49 +00:00
/* Do the same for device drivers and interface drivers. */
static inline int is_usb_device_driver(struct device_driver *drv)
{
return container_of(drv, struct usbdrv_wrap, driver)->
for_devices;
}
[PATCH] stop exporting two functions The way we're looking at USB suspend lately doesn't expect drivers to call usb_suspend_device() or usb_resume_device() directly; that'll be implicit when no interfaces are in use. This patch removes those APIs from visibility outside usbcore. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> drivers/usb/core/hub.c | 12 ++++-------- drivers/usb/core/usb.h | 4 ++++ include/linux/usb.h | 5 ----- 3 files changed, 8 insertions(+), 13 deletions(-)
2005-09-23 05:45:26 +00:00
USB: add helper to convert USB error codes This converts error codes specific to USB to generic error codes that can be returned to user space. Tests showed that it is so small that it is better inlined. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-19 20:54:48 +00:00
/* translate USB error codes to codes user space understands */
static inline int usb_translate_errors(int error_code)
{
switch (error_code) {
case 0:
case -ENOMEM:
case -ENODEV:
return error_code;
default:
return -EIO;
}
}
[PATCH] usb_interface power state This updates the handling of power state for USB interfaces. - Formalizes an existing invariant: interface "power state" is a boolean: ON when I/O is allowed, and FREEZE otherwise. It does so by defining some inlined helpers, then using them. - Adds a useful invariant: the only interfaces marked active are those bound to non-suspended drivers. Later patches build on this invariant. - Simplifies the interface driver API (and removes some error paths) by removing the requirement that they record power state changes during suspend and resume callbacks. Now usbcore does that. A few drivers were simplified to address that last change. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 33 +++++++++------------ drivers/usb/core/message.c | 1 drivers/usb/core/usb.c | 65 +++++++++++++++++++++++++++++++++---------- drivers/usb/core/usb.h | 18 +++++++++++ drivers/usb/input/hid-core.c | 2 - drivers/usb/misc/usbtest.c | 10 ------ drivers/usb/net/pegasus.c | 2 - drivers/usb/net/usbnet.c | 2 - 8 files changed, 85 insertions(+), 48 deletions(-)
2005-09-14 02:56:33 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* for labeling diagnostics */
extern const char *usbcore_name;
USB: create attributes before sending uevent This patch (as1087d) fixes a long-standing problem in usbcore: Device, interface, and endpoint attributes aren't added until _after_ the creation uevent has already been broadcast. Unfortunately there are a few attributes which cannot be created that early. The "descriptors" attribute is binary and so must be created separately. The power-management attributes can't be created until the dev/power/ group exists. And the interface string can vary from one altsetting to another, so it has to be created dynamically. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30 19:37:19 +00:00
/* sysfs stuff */
driver model: constify attribute groups Let attribute group vectors be declared "const". We'd like to let most attribute metadata live in read-only sections... this is a start. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-24 17:06:31 +00:00
extern const struct attribute_group *usb_device_groups[];
extern const struct attribute_group *usb_interface_groups[];
USB: create attributes before sending uevent This patch (as1087d) fixes a long-standing problem in usbcore: Device, interface, and endpoint attributes aren't added until _after_ the creation uevent has already been broadcast. Unfortunately there are a few attributes which cannot be created that early. The "descriptors" attribute is binary and so must be created separately. The power-management attributes can't be created until the dev/power/ group exists. And the interface string can vary from one altsetting to another, so it has to be created dynamically. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30 19:37:19 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* usbfs stuff */
usbfs: private mutex for open, release, and remove The usbfs code doesn't provide sufficient mutual exclusion among open, release, and remove. Release vs. remove is okay because they both acquire the device lock, but open is not exclusive with either one. All three routines modify the udev->filelist linked list, so they must not run concurrently. Apparently someone gave this a minimum amount of thought in the past by explicitly acquiring the BKL at the start of the usbdev_open routine. Oddly enough, there's a comment pointing out that locking is unnecessary because chrdev_open already has acquired the BKL. But this ignores the point that the files in /proc/bus/usb/* are not char device files; they are regular files and so they don't get any special locking. Furthermore it's necessary to acquire the same lock in the release and remove routines, which the code does not do. Yet another problem arises because the same file_operations structure is accessible through both the /proc/bus/usb/* and /dev/usb/usbdev* file nodes. Even when one of them has been removed, it's still possible for userspace to open the other. So simple locking around the individual remove routines is insufficient; we need to lock the entire usb_notify_remove_device notifier chain. Rather than rely on the BKL, this patch (as723) introduces a new private mutex for the purpose. Holding the BKL while invoking a notifier chain doesn't seem like a good idea. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-02 02:05:01 +00:00
extern struct mutex usbfs_mutex;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern struct usb_driver usbfs_driver;
USB: Make file operations structs in drivers/usb const. Making structs const prevents accidental bugs and with the proper debug options they're protected against corruption. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-05 23:37:11 +00:00
extern const struct file_operations usbfs_devices_fops;
USB: make usbdevices export their device nodes instead of using a separate class o The "real" usb-devices export now a device node which can populate /dev/bus/usb. o The usb_device class is optional now and can be disabled in the kernel config. Major/minor of the "real" devices and class devices are the same. o The environment of the usb-device event contains DEVNUM and BUSNUM to help udev and get rid of the ugly udev rule we need for the class devices. o The usb-devices and usb-interfaces share the same bus, so I used the new "struct device_type" to let these devices identify themselves. This also removes the current logic of using a magic platform-pointer. The name of the device_type is also added to the environment which makes it easier to distinguish the different kinds of devices on the same subsystem. It looks like this: add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1 SUBSYSTEM=usb SEQNUM=1533 MAJOR=189 MINOR=131 DEVTYPE=usb_device PRODUCT=46d/c03e/2000 TYPE=0/0/0 BUSNUM=002 DEVNUM=004 This udev rule works as a replacement for usb_device class devices: SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \ NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0644" Updated patch, which needs the device_type patches in Greg's tree. I also got a bugzilla assigned for this. :) https://bugzilla.novell.com/show_bug.cgi?id=250659 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-13 14:59:31 +00:00
extern const struct file_operations usbdev_file_operations;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern void usbfs_conn_disc_event(void);
USB: make usbdevices export their device nodes instead of using a separate class o The "real" usb-devices export now a device node which can populate /dev/bus/usb. o The usb_device class is optional now and can be disabled in the kernel config. Major/minor of the "real" devices and class devices are the same. o The environment of the usb-device event contains DEVNUM and BUSNUM to help udev and get rid of the ugly udev rule we need for the class devices. o The usb-devices and usb-interfaces share the same bus, so I used the new "struct device_type" to let these devices identify themselves. This also removes the current logic of using a magic platform-pointer. The name of the device_type is also added to the environment which makes it easier to distinguish the different kinds of devices on the same subsystem. It looks like this: add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1 SUBSYSTEM=usb SEQNUM=1533 MAJOR=189 MINOR=131 DEVTYPE=usb_device PRODUCT=46d/c03e/2000 TYPE=0/0/0 BUSNUM=002 DEVNUM=004 This udev rule works as a replacement for usb_device class devices: SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \ NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0644" Updated patch, which needs the device_type patches in Greg's tree. I also got a bugzilla assigned for this. :) https://bugzilla.novell.com/show_bug.cgi?id=250659 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-13 14:59:31 +00:00
extern int usb_devio_init(void);
extern void usb_devio_cleanup(void);
[PATCH] USB: fix up some sparse warnings about static functions that aren't static. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/core/usb.h ===================================================================
2005-04-19 00:39:24 +00:00
[PATCH] USB: add notifier functions to the USB core for devices and busses This should let us get rid of all of the different hooks in the USB core for when something has changed. Also, some other parts of the kernel have wanted to know this kind of information at times. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 04:15:16 +00:00
/* internal notify stuff */
extern void usb_notify_add_device(struct usb_device *udev);
extern void usb_notify_remove_device(struct usb_device *udev);
extern void usb_notify_add_bus(struct usb_bus *ubus);
extern void usb_notify_remove_bus(struct usb_bus *ubus);