40 lines
1.2 KiB
Plaintext
40 lines
1.2 KiB
Plaintext
![]() |
* Samsung's I2C controller
|
||
|
|
||
|
The Samsung's I2C controller is used to interface with I2C devices.
|
||
|
|
||
|
Required properties:
|
||
|
- compatible: value should be either of the following.
|
||
|
(a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
|
||
|
(b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
|
||
|
- reg: physical base address of the controller and length of memory mapped
|
||
|
region.
|
||
|
- interrupts: interrupt number to the cpu.
|
||
|
- samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
|
||
|
- gpios: The order of the gpios should be the following: <SDA, SCL>.
|
||
|
The gpio specifier depends on the gpio controller.
|
||
|
|
||
|
Optional properties:
|
||
|
- samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
|
||
|
specified, default value is 0.
|
||
|
- samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
|
||
|
specified, the default value in Hz is 100000.
|
||
|
|
||
|
Example:
|
||
|
|
||
|
i2c@13870000 {
|
||
|
compatible = "samsung,s3c2440-i2c";
|
||
|
reg = <0x13870000 0x100>;
|
||
|
interrupts = <345>;
|
||
|
samsung,i2c-sda-delay = <100>;
|
||
|
samsung,i2c-max-bus-freq = <100000>;
|
||
|
gpios = <&gpd1 2 0 /* SDA */
|
||
|
&gpd1 3 0 /* SCL */>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
wm8994@1a {
|
||
|
compatible = "wlf,wm8994";
|
||
|
reg = <0x1a>;
|
||
|
};
|
||
|
};
|