linux/drivers/net/hamradio/baycom_ser_hdx.c

742 lines
20 KiB
C
Raw Normal View History

/*****************************************************************************/
/*
* baycom_ser_hdx.c -- baycom ser12 halfduplex radio modem driver.
*
* Copyright (C) 1996-2000 Thomas Sailer (sailer@ife.ee.ethz.ch)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Please note that the GPL allows you to use the driver, NOT the radio.
* In order to use the radio, you need a license from the communications
* authority of your country.
*
*
* Supported modems
*
* ser12: This is a very simple 1200 baud AFSK modem. The modem consists only
* of a modulator/demodulator chip, usually a TI TCM3105. The computer
* is responsible for regenerating the receiver bit clock, as well as
* for handling the HDLC protocol. The modem connects to a serial port,
* hence the name. Since the serial port is not used as an async serial
* port, the kernel driver for serial ports cannot be used, and this
* driver only supports standard serial hardware (8250, 16450, 16550A)
*
*
* Command line options (insmod command line)
*
* mode ser12 hardware DCD
* ser12* software DCD
* ser12@ hardware/software DCD, i.e. no explicit DCD signal but hardware
* mutes audio input to the modem
* ser12+ hardware DCD, inverted signal at DCD pin
* iobase base address of the port; common values are 0x3f8, 0x2f8, 0x3e8, 0x2e8
* irq interrupt line of the port; common values are 4,3
*
*
* History:
* 0.1 26.06.1996 Adapted from baycom.c and made network driver interface
* 18.10.1996 Changed to new user space access routines (copy_{to,from}_user)
* 0.3 26.04.1997 init code/data tagged
* 0.4 08.07.1997 alternative ser12 decoding algorithm (uses delta CTS ints)
* 0.5 11.11.1997 ser12/par96 split into separate files
* 0.6 14.04.1998 cleanups
* 0.7 03.08.1999 adapt to Linus' new __setup/__initcall
* 0.8 10.08.1999 use module_init/module_exit
* 0.9 12.02.2000 adapted to softnet driver interface
* 0.10 03.07.2000 fix interface name handling
*/
/*****************************************************************************/
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/string.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <linux/hdlcdrv.h>
#include <linux/baycom.h>
#include <linux/jiffies.h>
/* --------------------------------------------------------------------- */
#define BAYCOM_DEBUG
/* --------------------------------------------------------------------- */
static const char bc_drvname[] = "baycom_ser_hdx";
static const char bc_drvinfo[] = KERN_INFO "baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
KERN_INFO "baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
/* --------------------------------------------------------------------- */
#define NR_PORTS 4
static struct net_device *baycom_device[NR_PORTS];
/* --------------------------------------------------------------------- */
#define RBR(iobase) (iobase+0)
#define THR(iobase) (iobase+0)
#define IER(iobase) (iobase+1)
#define IIR(iobase) (iobase+2)
#define FCR(iobase) (iobase+2)
#define LCR(iobase) (iobase+3)
#define MCR(iobase) (iobase+4)
#define LSR(iobase) (iobase+5)
#define MSR(iobase) (iobase+6)
#define SCR(iobase) (iobase+7)
#define DLL(iobase) (iobase+0)
#define DLM(iobase) (iobase+1)
#define SER12_EXTENT 8
/* ---------------------------------------------------------------------- */
/*
* Information that need to be kept for each board.
*/
struct baycom_state {
struct hdlcdrv_state hdrv;
int opt_dcd;
struct modem_state {
short arb_divider;
unsigned char flags;
unsigned int shreg;
struct modem_state_ser12 {
unsigned char tx_bit;
int dcd_sum0, dcd_sum1, dcd_sum2;
unsigned char last_sample;
unsigned char last_rxbit;
unsigned int dcd_shreg;
unsigned int dcd_time;
unsigned int bit_pll;
unsigned char interm_sample;
} ser12;
} modem;
#ifdef BAYCOM_DEBUG
struct debug_vals {
unsigned long last_jiffies;
unsigned cur_intcnt;
unsigned last_intcnt;
int cur_pllcorr;
int last_pllcorr;
} debug_vals;
#endif /* BAYCOM_DEBUG */
};
/* --------------------------------------------------------------------- */
static inline void baycom_int_freq(struct baycom_state *bc)
{
#ifdef BAYCOM_DEBUG
unsigned long cur_jiffies = jiffies;
/*
* measure the interrupt frequency
*/
bc->debug_vals.cur_intcnt++;
if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
bc->debug_vals.last_jiffies = cur_jiffies;
bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
bc->debug_vals.cur_intcnt = 0;
bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr;
bc->debug_vals.cur_pllcorr = 0;
}
#endif /* BAYCOM_DEBUG */
}
/* --------------------------------------------------------------------- */
/*
* ===================== SER12 specific routines =========================
*/
static inline void ser12_set_divisor(struct net_device *dev,
unsigned char divisor)
{
outb(0x81, LCR(dev->base_addr)); /* DLAB = 1 */
outb(divisor, DLL(dev->base_addr));
outb(0, DLM(dev->base_addr));
outb(0x01, LCR(dev->base_addr)); /* word length = 6 */
/*
* make sure the next interrupt is generated;
* 0 must be used to power the modem; the modem draws its
* power from the TxD line
*/
outb(0x00, THR(dev->base_addr));
/*
* it is important not to set the divider while transmitting;
* this reportedly makes some UARTs generating interrupts
* in the hundredthousands per second region
* Reported by: Ignacio.Arenaza@studi.epfl.ch (Ignacio Arenaza Nuno)
*/
}
/* --------------------------------------------------------------------- */
/*
* must call the TX arbitrator every 10ms
*/
#define SER12_ARB_DIVIDER(bc) (bc->opt_dcd ? 24 : 36)
#define SER12_DCD_INTERVAL(bc) (bc->opt_dcd ? 12 : 240)
static inline void ser12_tx(struct net_device *dev, struct baycom_state *bc)
{
/* one interrupt per channel bit */
ser12_set_divisor(dev, 12);
/*
* first output the last bit (!) then call HDLC transmitter,
* since this may take quite long
*/
outb(0x0e | (!!bc->modem.ser12.tx_bit), MCR(dev->base_addr));
if (bc->modem.shreg <= 1)
bc->modem.shreg = 0x10000 | hdlcdrv_getbits(&bc->hdrv);
bc->modem.ser12.tx_bit = !(bc->modem.ser12.tx_bit ^
(bc->modem.shreg & 1));
bc->modem.shreg >>= 1;
}
/* --------------------------------------------------------------------- */
static inline void ser12_rx(struct net_device *dev, struct baycom_state *bc)
{
unsigned char cur_s;
/*
* do demodulator
*/
cur_s = inb(MSR(dev->base_addr)) & 0x10; /* the CTS line */
hdlcdrv_channelbit(&bc->hdrv, cur_s);
bc->modem.ser12.dcd_shreg = (bc->modem.ser12.dcd_shreg << 1) |
(cur_s != bc->modem.ser12.last_sample);
bc->modem.ser12.last_sample = cur_s;
if(bc->modem.ser12.dcd_shreg & 1) {
if (!bc->opt_dcd) {
unsigned int dcdspos, dcdsneg;
dcdspos = dcdsneg = 0;
dcdspos += ((bc->modem.ser12.dcd_shreg >> 1) & 1);
if (!(bc->modem.ser12.dcd_shreg & 0x7ffffffe))
dcdspos += 2;
dcdsneg += ((bc->modem.ser12.dcd_shreg >> 2) & 1);
dcdsneg += ((bc->modem.ser12.dcd_shreg >> 3) & 1);
dcdsneg += ((bc->modem.ser12.dcd_shreg >> 4) & 1);
bc->modem.ser12.dcd_sum0 += 16*dcdspos - dcdsneg;
} else
bc->modem.ser12.dcd_sum0--;
}
if(!bc->modem.ser12.dcd_time) {
hdlcdrv_setdcd(&bc->hdrv, (bc->modem.ser12.dcd_sum0 +
bc->modem.ser12.dcd_sum1 +
bc->modem.ser12.dcd_sum2) < 0);
bc->modem.ser12.dcd_sum2 = bc->modem.ser12.dcd_sum1;
bc->modem.ser12.dcd_sum1 = bc->modem.ser12.dcd_sum0;
/* offset to ensure DCD off on silent input */
bc->modem.ser12.dcd_sum0 = 2;
bc->modem.ser12.dcd_time = SER12_DCD_INTERVAL(bc);
}
bc->modem.ser12.dcd_time--;
if (!bc->opt_dcd) {
/*
* PLL code for the improved software DCD algorithm
*/
if (bc->modem.ser12.interm_sample) {
/*
* intermediate sample; set timing correction to normal
*/
ser12_set_divisor(dev, 4);
} else {
/*
* do PLL correction and call HDLC receiver
*/
switch (bc->modem.ser12.dcd_shreg & 7) {
case 1: /* transition too late */
ser12_set_divisor(dev, 5);
#ifdef BAYCOM_DEBUG
bc->debug_vals.cur_pllcorr++;
#endif /* BAYCOM_DEBUG */
break;
case 4: /* transition too early */
ser12_set_divisor(dev, 3);
#ifdef BAYCOM_DEBUG
bc->debug_vals.cur_pllcorr--;
#endif /* BAYCOM_DEBUG */
break;
default:
ser12_set_divisor(dev, 4);
break;
}
bc->modem.shreg >>= 1;
if (bc->modem.ser12.last_sample ==
bc->modem.ser12.last_rxbit)
bc->modem.shreg |= 0x10000;
bc->modem.ser12.last_rxbit =
bc->modem.ser12.last_sample;
}
if (++bc->modem.ser12.interm_sample >= 3)
bc->modem.ser12.interm_sample = 0;
/*
* DCD stuff
*/
if (bc->modem.ser12.dcd_shreg & 1) {
unsigned int dcdspos, dcdsneg;
dcdspos = dcdsneg = 0;
dcdspos += ((bc->modem.ser12.dcd_shreg >> 1) & 1);
dcdspos += (!(bc->modem.ser12.dcd_shreg & 0x7ffffffe))
<< 1;
dcdsneg += ((bc->modem.ser12.dcd_shreg >> 2) & 1);
dcdsneg += ((bc->modem.ser12.dcd_shreg >> 3) & 1);
dcdsneg += ((bc->modem.ser12.dcd_shreg >> 4) & 1);
bc->modem.ser12.dcd_sum0 += 16*dcdspos - dcdsneg;
}
} else {
/*
* PLL algorithm for the hardware squelch DCD algorithm
*/
if (bc->modem.ser12.interm_sample) {
/*
* intermediate sample; set timing correction to normal
*/
ser12_set_divisor(dev, 6);
} else {
/*
* do PLL correction and call HDLC receiver
*/
switch (bc->modem.ser12.dcd_shreg & 3) {
case 1: /* transition too late */
ser12_set_divisor(dev, 7);
#ifdef BAYCOM_DEBUG
bc->debug_vals.cur_pllcorr++;
#endif /* BAYCOM_DEBUG */
break;
case 2: /* transition too early */
ser12_set_divisor(dev, 5);
#ifdef BAYCOM_DEBUG
bc->debug_vals.cur_pllcorr--;
#endif /* BAYCOM_DEBUG */
break;
default:
ser12_set_divisor(dev, 6);
break;
}
bc->modem.shreg >>= 1;
if (bc->modem.ser12.last_sample ==
bc->modem.ser12.last_rxbit)
bc->modem.shreg |= 0x10000;
bc->modem.ser12.last_rxbit =
bc->modem.ser12.last_sample;
}
bc->modem.ser12.interm_sample = !bc->modem.ser12.interm_sample;
/*
* DCD stuff
*/
bc->modem.ser12.dcd_sum0 -= (bc->modem.ser12.dcd_shreg & 1);
}
outb(0x0d, MCR(dev->base_addr)); /* transmitter off */
if (bc->modem.shreg & 1) {
hdlcdrv_putbits(&bc->hdrv, bc->modem.shreg >> 1);
bc->modem.shreg = 0x10000;
}
if(!bc->modem.ser12.dcd_time) {
if (bc->opt_dcd & 1)
hdlcdrv_setdcd(&bc->hdrv, !((inb(MSR(dev->base_addr)) ^ bc->opt_dcd) & 0x80));
else
hdlcdrv_setdcd(&bc->hdrv, (bc->modem.ser12.dcd_sum0 +
bc->modem.ser12.dcd_sum1 +
bc->modem.ser12.dcd_sum2) < 0);
bc->modem.ser12.dcd_sum2 = bc->modem.ser12.dcd_sum1;
bc->modem.ser12.dcd_sum1 = bc->modem.ser12.dcd_sum0;
/* offset to ensure DCD off on silent input */
bc->modem.ser12.dcd_sum0 = 2;
bc->modem.ser12.dcd_time = SER12_DCD_INTERVAL(bc);
}
bc->modem.ser12.dcd_time--;
}
/* --------------------------------------------------------------------- */
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
static irqreturn_t ser12_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *)dev_id;
struct baycom_state *bc = netdev_priv(dev);
unsigned char iir;
if (!dev || !bc || bc->hdrv.magic != HDLCDRV_MAGIC)
return IRQ_NONE;
/* fast way out */
if ((iir = inb(IIR(dev->base_addr))) & 1)
return IRQ_NONE;
baycom_int_freq(bc);
do {
switch (iir & 6) {
case 6:
inb(LSR(dev->base_addr));
break;
case 4:
inb(RBR(dev->base_addr));
break;
case 2:
/*
* check if transmitter active
*/
if (hdlcdrv_ptt(&bc->hdrv))
ser12_tx(dev, bc);
else {
ser12_rx(dev, bc);
bc->modem.arb_divider--;
}
outb(0x00, THR(dev->base_addr));
break;
default:
inb(MSR(dev->base_addr));
break;
}
iir = inb(IIR(dev->base_addr));
} while (!(iir & 1));
if (bc->modem.arb_divider <= 0) {
bc->modem.arb_divider = SER12_ARB_DIVIDER(bc);
local_irq_enable();
hdlcdrv_arbitrate(dev, &bc->hdrv);
}
local_irq_enable();
hdlcdrv_transmitter(dev, &bc->hdrv);
hdlcdrv_receiver(dev, &bc->hdrv);
local_irq_disable();
return IRQ_HANDLED;
}
/* --------------------------------------------------------------------- */
enum uart { c_uart_unknown, c_uart_8250,
c_uart_16450, c_uart_16550, c_uart_16550A};
static const char *uart_str[] = {
"unknown", "8250", "16450", "16550", "16550A"
};
static enum uart ser12_check_uart(unsigned int iobase)
{
unsigned char b1,b2,b3;
enum uart u;
enum uart uart_tab[] =
{ c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A };
b1 = inb(MCR(iobase));
outb(b1 | 0x10, MCR(iobase)); /* loopback mode */
b2 = inb(MSR(iobase));
outb(0x1a, MCR(iobase));
b3 = inb(MSR(iobase)) & 0xf0;
outb(b1, MCR(iobase)); /* restore old values */
outb(b2, MSR(iobase));
if (b3 != 0x90)
return c_uart_unknown;
inb(RBR(iobase));
inb(RBR(iobase));
outb(0x01, FCR(iobase)); /* enable FIFOs */
u = uart_tab[(inb(IIR(iobase)) >> 6) & 3];
if (u == c_uart_16450) {
outb(0x5a, SCR(iobase));
b1 = inb(SCR(iobase));
outb(0xa5, SCR(iobase));
b2 = inb(SCR(iobase));
if ((b1 != 0x5a) || (b2 != 0xa5))
u = c_uart_8250;
}
return u;
}
/* --------------------------------------------------------------------- */
static int ser12_open(struct net_device *dev)
{
struct baycom_state *bc = netdev_priv(dev);
enum uart u;
if (!dev || !bc)
return -ENXIO;
if (!dev->base_addr || dev->base_addr > 0x1000-SER12_EXTENT ||
dev->irq < 2 || dev->irq > 15)
return -ENXIO;
if (!request_region(dev->base_addr, SER12_EXTENT, "baycom_ser12"))
return -EACCES;
memset(&bc->modem, 0, sizeof(bc->modem));
bc->hdrv.par.bitrate = 1200;
if ((u = ser12_check_uart(dev->base_addr)) == c_uart_unknown) {
release_region(dev->base_addr, SER12_EXTENT);
return -EIO;
}
outb(0, FCR(dev->base_addr)); /* disable FIFOs */
outb(0x0d, MCR(dev->base_addr));
outb(0, IER(dev->base_addr));
if (request_irq(dev->irq, ser12_interrupt, IRQF_DISABLED | IRQF_SHARED,
"baycom_ser12", dev)) {
release_region(dev->base_addr, SER12_EXTENT);
return -EBUSY;
}
/*
* enable transmitter empty interrupt
*/
outb(2, IER(dev->base_addr));
/*
* set the SIO to 6 Bits/character and 19200 or 28800 baud, so that
* we get exactly (hopefully) 2 or 3 interrupts per radio symbol,
* depending on the usage of the software DCD routine
*/
ser12_set_divisor(dev, bc->opt_dcd ? 6 : 4);
printk(KERN_INFO "%s: ser12 at iobase 0x%lx irq %u uart %s\n",
bc_drvname, dev->base_addr, dev->irq, uart_str[u]);
return 0;
}
/* --------------------------------------------------------------------- */
static int ser12_close(struct net_device *dev)
{
struct baycom_state *bc = netdev_priv(dev);
if (!dev || !bc)
return -EINVAL;
/*
* disable interrupts
*/
outb(0, IER(dev->base_addr));
outb(1, MCR(dev->base_addr));
free_irq(dev->irq, dev);
release_region(dev->base_addr, SER12_EXTENT);
printk(KERN_INFO "%s: close ser12 at iobase 0x%lx irq %u\n",
bc_drvname, dev->base_addr, dev->irq);
return 0;
}
/* --------------------------------------------------------------------- */
/*
* ===================== hdlcdrv driver interface =========================
*/
/* --------------------------------------------------------------------- */
static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr,
struct hdlcdrv_ioctl *hi, int cmd);
/* --------------------------------------------------------------------- */
static struct hdlcdrv_ops ser12_ops = {
.drvname = bc_drvname,
.drvinfo = bc_drvinfo,
.open = ser12_open,
.close = ser12_close,
.ioctl = baycom_ioctl,
};
/* --------------------------------------------------------------------- */
static int baycom_setmode(struct baycom_state *bc, const char *modestr)
{
if (strchr(modestr, '*'))
bc->opt_dcd = 0;
else if (strchr(modestr, '+'))
bc->opt_dcd = -1;
else if (strchr(modestr, '@'))
bc->opt_dcd = -2;
else
bc->opt_dcd = 1;
return 0;
}
/* --------------------------------------------------------------------- */
static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr,
struct hdlcdrv_ioctl *hi, int cmd)
{
struct baycom_state *bc;
struct baycom_ioctl bi;
if (!dev)
return -EINVAL;
bc = netdev_priv(dev);
BUG_ON(bc->hdrv.magic != HDLCDRV_MAGIC);
if (cmd != SIOCDEVPRIVATE)
return -ENOIOCTLCMD;
switch (hi->cmd) {
default:
break;
case HDLCDRVCTL_GETMODE:
strcpy(hi->data.modename, "ser12");
if (bc->opt_dcd <= 0)
strcat(hi->data.modename, (!bc->opt_dcd) ? "*" : (bc->opt_dcd == -2) ? "@" : "+");
if (copy_to_user(ifr->ifr_data, hi, sizeof(struct hdlcdrv_ioctl)))
return -EFAULT;
return 0;
case HDLCDRVCTL_SETMODE:
if (netif_running(dev) || !capable(CAP_NET_ADMIN))
return -EACCES;
hi->data.modename[sizeof(hi->data.modename)-1] = '\0';
return baycom_setmode(bc, hi->data.modename);
case HDLCDRVCTL_MODELIST:
strcpy(hi->data.modename, "ser12");
if (copy_to_user(ifr->ifr_data, hi, sizeof(struct hdlcdrv_ioctl)))
return -EFAULT;
return 0;
case HDLCDRVCTL_MODEMPARMASK:
return HDLCDRV_PARMASK_IOBASE | HDLCDRV_PARMASK_IRQ;
}
if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi)))
return -EFAULT;
switch (bi.cmd) {
default:
return -ENOIOCTLCMD;
#ifdef BAYCOM_DEBUG
case BAYCOMCTL_GETDEBUG:
bi.data.dbg.debug1 = bc->hdrv.ptt_keyed;
bi.data.dbg.debug2 = bc->debug_vals.last_intcnt;
bi.data.dbg.debug3 = bc->debug_vals.last_pllcorr;
break;
#endif /* BAYCOM_DEBUG */
}
if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
return -EFAULT;
return 0;
}
/* --------------------------------------------------------------------- */
/*
* command line settable parameters
*/
static char *mode[NR_PORTS] = { "ser12*", };
static int iobase[NR_PORTS] = { 0x3f8, };
static int irq[NR_PORTS] = { 4, };
module_param_array(mode, charp, NULL, 0);
MODULE_PARM_DESC(mode, "baycom operating mode; * for software DCD");
module_param_array(iobase, int, NULL, 0);
MODULE_PARM_DESC(iobase, "baycom io base address");
module_param_array(irq, int, NULL, 0);
MODULE_PARM_DESC(irq, "baycom irq number");
MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
MODULE_DESCRIPTION("Baycom ser12 half duplex amateur radio modem driver");
MODULE_LICENSE("GPL");
/* --------------------------------------------------------------------- */
static int __init init_baycomserhdx(void)
{
int i, found = 0;
char set_hw = 1;
printk(bc_drvinfo);
/*
* register net devices
*/
for (i = 0; i < NR_PORTS; i++) {
struct net_device *dev;
struct baycom_state *bc;
char ifname[IFNAMSIZ];
sprintf(ifname, "bcsh%d", i);
if (!mode[i])
set_hw = 0;
if (!set_hw)
iobase[i] = irq[i] = 0;
dev = hdlcdrv_register(&ser12_ops,
sizeof(struct baycom_state),
ifname, iobase[i], irq[i], 0);
if (IS_ERR(dev))
break;
bc = netdev_priv(dev);
if (set_hw && baycom_setmode(bc, mode[i]))
set_hw = 0;
found++;
baycom_device[i] = dev;
}
if (!found)
return -ENXIO;
return 0;
}
static void __exit cleanup_baycomserhdx(void)
{
int i;
for(i = 0; i < NR_PORTS; i++) {
struct net_device *dev = baycom_device[i];
if (dev)
hdlcdrv_unregister(dev);
}
}
module_init(init_baycomserhdx);
module_exit(cleanup_baycomserhdx);
/* --------------------------------------------------------------------- */
#ifndef MODULE
/*
* format: baycom_ser_hdx=io,irq,mode
* mode: ser12 hardware DCD
* ser12* software DCD
* ser12@ hardware/software DCD, i.e. no explicit DCD signal but hardware
* mutes audio input to the modem
* ser12+ hardware DCD, inverted signal at DCD pin
*/
static int __init baycom_ser_hdx_setup(char *str)
{
static unsigned nr_dev;
int ints[3];
if (nr_dev >= NR_PORTS)
return 0;
str = get_options(str, 3, ints);
if (ints[0] < 2)
return 0;
mode[nr_dev] = str;
iobase[nr_dev] = ints[1];
irq[nr_dev] = ints[2];
nr_dev++;
return 1;
}
__setup("baycom_ser_hdx=", baycom_ser_hdx_setup);
#endif /* MODULE */
/* --------------------------------------------------------------------- */