406 lines
8.0 KiB
C
406 lines
8.0 KiB
C
![]() |
/*
|
||
|
* Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
|
||
|
*
|
||
|
* Copyright (c) 2003 Intracom S.A.
|
||
|
* by Pantelis Antoniou <panto@intracom.gr>
|
||
|
*
|
||
|
* 2005 (c) MontaVista Software, Inc.
|
||
|
* Vitaly Bordug <vbordug@ru.mvista.com>
|
||
|
*
|
||
|
* This file is licensed under the terms of the GNU General Public License
|
||
|
* version 2. This program is licensed "as is" without any warranty of any
|
||
|
* kind, whether express or implied.
|
||
|
*/
|
||
|
|
||
|
|
||
|
#include <linux/config.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/types.h>
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/sched.h>
|
||
|
#include <linux/string.h>
|
||
|
#include <linux/ptrace.h>
|
||
|
#include <linux/errno.h>
|
||
|
#include <linux/ioport.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <linux/interrupt.h>
|
||
|
#include <linux/pci.h>
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/netdevice.h>
|
||
|
#include <linux/etherdevice.h>
|
||
|
#include <linux/skbuff.h>
|
||
|
#include <linux/spinlock.h>
|
||
|
#include <linux/mii.h>
|
||
|
#include <linux/ethtool.h>
|
||
|
#include <linux/bitops.h>
|
||
|
|
||
|
#include <asm/pgtable.h>
|
||
|
#include <asm/irq.h>
|
||
|
#include <asm/uaccess.h>
|
||
|
|
||
|
#include "fs_enet.h"
|
||
|
|
||
|
#ifdef CONFIG_8xx
|
||
|
static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
|
||
|
{
|
||
|
immap_t *im = (immap_t *)fs_enet_immap;
|
||
|
void *dir, *dat, *ppar;
|
||
|
int adv;
|
||
|
u8 msk;
|
||
|
|
||
|
switch (port) {
|
||
|
case fsiop_porta:
|
||
|
dir = &im->im_ioport.iop_padir;
|
||
|
dat = &im->im_ioport.iop_padat;
|
||
|
ppar = &im->im_ioport.iop_papar;
|
||
|
break;
|
||
|
|
||
|
case fsiop_portb:
|
||
|
dir = &im->im_cpm.cp_pbdir;
|
||
|
dat = &im->im_cpm.cp_pbdat;
|
||
|
ppar = &im->im_cpm.cp_pbpar;
|
||
|
break;
|
||
|
|
||
|
case fsiop_portc:
|
||
|
dir = &im->im_ioport.iop_pcdir;
|
||
|
dat = &im->im_ioport.iop_pcdat;
|
||
|
ppar = &im->im_ioport.iop_pcpar;
|
||
|
break;
|
||
|
|
||
|
case fsiop_portd:
|
||
|
dir = &im->im_ioport.iop_pddir;
|
||
|
dat = &im->im_ioport.iop_pddat;
|
||
|
ppar = &im->im_ioport.iop_pdpar;
|
||
|
break;
|
||
|
|
||
|
case fsiop_porte:
|
||
|
dir = &im->im_cpm.cp_pedir;
|
||
|
dat = &im->im_cpm.cp_pedat;
|
||
|
ppar = &im->im_cpm.cp_pepar;
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
printk(KERN_ERR DRV_MODULE_NAME
|
||
|
"Illegal port value %d!\n", port);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
adv = bit >> 3;
|
||
|
dir = (char *)dir + adv;
|
||
|
dat = (char *)dat + adv;
|
||
|
ppar = (char *)ppar + adv;
|
||
|
|
||
|
msk = 1 << (7 - (bit & 7));
|
||
|
if ((in_8(ppar) & msk) != 0) {
|
||
|
printk(KERN_ERR DRV_MODULE_NAME
|
||
|
"pin %d on port %d is not general purpose!\n", bit, port);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
*dirp = dir;
|
||
|
*datp = dat;
|
||
|
*mskp = msk;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
#ifdef CONFIG_8260
|
||
|
static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
|
||
|
{
|
||
|
iop_cpm2_t *io = &((cpm2_map_t *)fs_enet_immap)->im_ioport;
|
||
|
void *dir, *dat, *ppar;
|
||
|
int adv;
|
||
|
u8 msk;
|
||
|
|
||
|
switch (port) {
|
||
|
case fsiop_porta:
|
||
|
dir = &io->iop_pdira;
|
||
|
dat = &io->iop_pdata;
|
||
|
ppar = &io->iop_ppara;
|
||
|
break;
|
||
|
|
||
|
case fsiop_portb:
|
||
|
dir = &io->iop_pdirb;
|
||
|
dat = &io->iop_pdatb;
|
||
|
ppar = &io->iop_pparb;
|
||
|
break;
|
||
|
|
||
|
case fsiop_portc:
|
||
|
dir = &io->iop_pdirc;
|
||
|
dat = &io->iop_pdatc;
|
||
|
ppar = &io->iop_pparc;
|
||
|
break;
|
||
|
|
||
|
case fsiop_portd:
|
||
|
dir = &io->iop_pdird;
|
||
|
dat = &io->iop_pdatd;
|
||
|
ppar = &io->iop_ppard;
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
printk(KERN_ERR DRV_MODULE_NAME
|
||
|
"Illegal port value %d!\n", port);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
adv = bit >> 3;
|
||
|
dir = (char *)dir + adv;
|
||
|
dat = (char *)dat + adv;
|
||
|
ppar = (char *)ppar + adv;
|
||
|
|
||
|
msk = 1 << (7 - (bit & 7));
|
||
|
if ((in_8(ppar) & msk) != 0) {
|
||
|
printk(KERN_ERR DRV_MODULE_NAME
|
||
|
"pin %d on port %d is not general purpose!\n", bit, port);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
*dirp = dir;
|
||
|
*datp = dat;
|
||
|
*mskp = msk;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
static inline void bb_set(u8 *p, u8 m)
|
||
|
{
|
||
|
out_8(p, in_8(p) | m);
|
||
|
}
|
||
|
|
||
|
static inline void bb_clr(u8 *p, u8 m)
|
||
|
{
|
||
|
out_8(p, in_8(p) & ~m);
|
||
|
}
|
||
|
|
||
|
static inline int bb_read(u8 *p, u8 m)
|
||
|
{
|
||
|
return (in_8(p) & m) != 0;
|
||
|
}
|
||
|
|
||
|
static inline void mdio_active(struct fs_enet_mii_bus *bus)
|
||
|
{
|
||
|
bb_set(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
|
||
|
}
|
||
|
|
||
|
static inline void mdio_tristate(struct fs_enet_mii_bus *bus)
|
||
|
{
|
||
|
bb_clr(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
|
||
|
}
|
||
|
|
||
|
static inline int mdio_read(struct fs_enet_mii_bus *bus)
|
||
|
{
|
||
|
return bb_read(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
|
||
|
}
|
||
|
|
||
|
static inline void mdio(struct fs_enet_mii_bus *bus, int what)
|
||
|
{
|
||
|
if (what)
|
||
|
bb_set(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
|
||
|
else
|
||
|
bb_clr(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
|
||
|
}
|
||
|
|
||
|
static inline void mdc(struct fs_enet_mii_bus *bus, int what)
|
||
|
{
|
||
|
if (what)
|
||
|
bb_set(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
|
||
|
else
|
||
|
bb_clr(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
|
||
|
}
|
||
|
|
||
|
static inline void mii_delay(struct fs_enet_mii_bus *bus)
|
||
|
{
|
||
|
udelay(bus->bus_info->i.bitbang.delay);
|
||
|
}
|
||
|
|
||
|
/* Utility to send the preamble, address, and register (common to read and write). */
|
||
|
static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg)
|
||
|
{
|
||
|
int j;
|
||
|
|
||
|
/*
|
||
|
* Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
|
||
|
* The IEEE spec says this is a PHY optional requirement. The AMD
|
||
|
* 79C874 requires one after power up and one after a MII communications
|
||
|
* error. This means that we are doing more preambles than we need,
|
||
|
* but it is safer and will be much more robust.
|
||
|
*/
|
||
|
|
||
|
mdio_active(bus);
|
||
|
mdio(bus, 1);
|
||
|
for (j = 0; j < 32; j++) {
|
||
|
mdc(bus, 0);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
}
|
||
|
|
||
|
/* send the start bit (01) and the read opcode (10) or write (10) */
|
||
|
mdc(bus, 0);
|
||
|
mdio(bus, 0);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 0);
|
||
|
mdio(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 0);
|
||
|
mdio(bus, read);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 0);
|
||
|
mdio(bus, !read);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
|
||
|
/* send the PHY address */
|
||
|
for (j = 0; j < 5; j++) {
|
||
|
mdc(bus, 0);
|
||
|
mdio(bus, (addr & 0x10) != 0);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
addr <<= 1;
|
||
|
}
|
||
|
|
||
|
/* send the register address */
|
||
|
for (j = 0; j < 5; j++) {
|
||
|
mdc(bus, 0);
|
||
|
mdio(bus, (reg & 0x10) != 0);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
reg <<= 1;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
|
||
|
{
|
||
|
u16 rdreg;
|
||
|
int ret, j;
|
||
|
u8 addr = phy_id & 0xff;
|
||
|
u8 reg = location & 0xff;
|
||
|
|
||
|
bitbang_pre(bus, 1, addr, reg);
|
||
|
|
||
|
/* tri-state our MDIO I/O pin so we can read */
|
||
|
mdc(bus, 0);
|
||
|
mdio_tristate(bus);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
|
||
|
/* check the turnaround bit: the PHY should be driving it to zero */
|
||
|
if (mdio_read(bus) != 0) {
|
||
|
/* PHY didn't drive TA low */
|
||
|
for (j = 0; j < 32; j++) {
|
||
|
mdc(bus, 0);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
}
|
||
|
ret = -1;
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
mdc(bus, 0);
|
||
|
mii_delay(bus);
|
||
|
|
||
|
/* read 16 bits of register data, MSB first */
|
||
|
rdreg = 0;
|
||
|
for (j = 0; j < 16; j++) {
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
rdreg <<= 1;
|
||
|
rdreg |= mdio_read(bus);
|
||
|
mdc(bus, 0);
|
||
|
mii_delay(bus);
|
||
|
}
|
||
|
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 0);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
|
||
|
ret = rdreg;
|
||
|
out:
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val)
|
||
|
{
|
||
|
int j;
|
||
|
u8 addr = phy_id & 0xff;
|
||
|
u8 reg = location & 0xff;
|
||
|
u16 value = val & 0xffff;
|
||
|
|
||
|
bitbang_pre(bus, 0, addr, reg);
|
||
|
|
||
|
/* send the turnaround (10) */
|
||
|
mdc(bus, 0);
|
||
|
mdio(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 0);
|
||
|
mdio(bus, 0);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
|
||
|
/* write 16 bits of register data, MSB first */
|
||
|
for (j = 0; j < 16; j++) {
|
||
|
mdc(bus, 0);
|
||
|
mdio(bus, (value & 0x8000) != 0);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
value <<= 1;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Tri-state the MDIO line.
|
||
|
*/
|
||
|
mdio_tristate(bus);
|
||
|
mdc(bus, 0);
|
||
|
mii_delay(bus);
|
||
|
mdc(bus, 1);
|
||
|
mii_delay(bus);
|
||
|
}
|
||
|
|
||
|
int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus)
|
||
|
{
|
||
|
const struct fs_mii_bus_info *bi = bus->bus_info;
|
||
|
int r;
|
||
|
|
||
|
r = bitbang_prep_bit(&bus->bitbang.mdio_dir,
|
||
|
&bus->bitbang.mdio_dat,
|
||
|
&bus->bitbang.mdio_msk,
|
||
|
bi->i.bitbang.mdio_port,
|
||
|
bi->i.bitbang.mdio_bit);
|
||
|
if (r != 0)
|
||
|
return r;
|
||
|
|
||
|
r = bitbang_prep_bit(&bus->bitbang.mdc_dir,
|
||
|
&bus->bitbang.mdc_dat,
|
||
|
&bus->bitbang.mdc_msk,
|
||
|
bi->i.bitbang.mdc_port,
|
||
|
bi->i.bitbang.mdc_bit);
|
||
|
if (r != 0)
|
||
|
return r;
|
||
|
|
||
|
bus->mii_read = mii_read;
|
||
|
bus->mii_write = mii_write;
|
||
|
|
||
|
return 0;
|
||
|
}
|