q3k
/
linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux/drivers/media/dvb-frontends/mb86a20s.c

702 lines
17 KiB
C
Raw Normal View History

[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
/*
* Fujitu mb86a20s ISDB-T/ISDB-Tsb Module driver
*
* Copyright (C) 2010 Mauro Carvalho Chehab <mchehab@redhat.com>
* Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com>
*
* FIXME: Need to port to DVB v5.2 API
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#include <linux/kernel.h>
#include <asm/div64.h>
#include "dvb_frontend.h"
#include "mb86a20s.h"
static int debug = 1;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
#define rc(args...) do { \
printk(KERN_ERR "mb86a20s: " args); \
} while (0)
#define dprintk(args...) \
do { \
if (debug) { \
printk(KERN_DEBUG "mb86a20s: %s: ", __func__); \
printk(args); \
} \
} while (0)
struct mb86a20s_state {
struct i2c_adapter *i2c;
const struct mb86a20s_config *config;
struct dvb_frontend frontend;
[media] mb86a20s: Be sure that device is initialized before starting DVB Due to a hard to track bug between tda829x/tda18271/saa7134, tda829x wants to go to analog mode during DVB initialization, causing some I2C errors. The analog failure doesn't cause any harm, as the device were already properly initialized in analog mode. However, the failure at the digital mode causes the frontend mb86a20s to not initialize. Fortunately, at least on my tests, it was possible to detect that the device is a mb86a20s before the failure. What happens is that tda8290 is a very bad boy: during DVB setup, it keeps insisting to call tda18271 analog_set_params, that calls tune_agc code. The tune_agc code calls saa7134 driver, changing the value of GPIO 27, switching from digital to analog mode and disabling the access to mb86a20s, as, on Kworld SBTVD, the same GPIO used to switch the hardware AGC mode seems to be used to enable the I2C switch that allows access to the frontend (mb86a20s). So, a call to analog_set_params ultimately disables the access to the frontend, and causes a failure at the init frontend logic. This patch is a workaround for this issue: it simply checks if the frontend init had any failure. If so, it will init the frontend when some DTV application will try to set DVB mode. Even being a hack for Kworld SBTVD to work, and assumning that we could teach tda8290 to be a good boy, this is actually an improvement at the frontend driver, as it will be more reliable to initialization failures. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-14 14:10:05 +00:00
bool need_init;
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
};
struct regdata {
u8 reg;
u8 data;
};
/*
* Initialization sequence: Use whatevere default values that PV SBTVD
* does on its initialisation, obtained via USB snoop
*/
static struct regdata mb86a20s_init[] = {
{ 0x70, 0x0f },
{ 0x70, 0xff },
{ 0x08, 0x01 },
{ 0x09, 0x3e },
mb86a20s: Group registers into the same line On mb86a20s, some registers have sub-addresses, while others not. In order to make easier to compare different settings, group them. No functional changes in this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 12:56:30 +00:00
{ 0x50, 0xd1 }, { 0x51, 0x22 },
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
{ 0x39, 0x01 },
{ 0x71, 0x00 },
mb86a20s: Group registers into the same line On mb86a20s, some registers have sub-addresses, while others not. In order to make easier to compare different settings, group them. No functional changes in this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 12:56:30 +00:00
{ 0x28, 0x2a }, { 0x29, 0x00 }, { 0x2a, 0xff }, { 0x2b, 0x80 },
{ 0x28, 0x20 }, { 0x29, 0x33 }, { 0x2a, 0xdf }, { 0x2b, 0xa9 },
mb86a20s: Add a few more register settings at the init seq Some time ago, Manoel sent us a patch adding more stuff to the init sequence. However, his patch were also doing non-related stuff, by changing the init logic without any good reason. So, it was asked for him to submit a patch with just the data that has changed, in order to allow us to better analyze it. As he didn't what it was requested, I finally found some time to dig into his init sequence and add it here. Basically, new stuff is added there. There are a few changes: 1) The removal of the extra (duplicated) logic that puts the chip into the serial mode; 2) Some Viterbi VBER measurement init data was changed from 0x00 to 0xff for layer A, to match what was done for layers B and C. None of those caused any regressions and both make sense on my eyes. The other parameters additions actually increased the tuning quality for some channels. Yet, some channels that were previously discovered with scan disappered, while others appeared instead. This were tested in Brasilia, with an external antena. At the overall, it is now a little better. So, better to add these, and then try to figure out a configuration that would get even better scanning results. Reported-by: Manoel Pinheiro <pinusdtv@hotmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 13:00:28 +00:00
{ 0x28, 0x22 }, { 0x29, 0x00 }, { 0x2a, 0x1f }, { 0x2b, 0xf0 },
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
{ 0x3b, 0x21 },
{ 0x3c, 0x3a },
{ 0x01, 0x0d },
mb86a20s: Group registers into the same line On mb86a20s, some registers have sub-addresses, while others not. In order to make easier to compare different settings, group them. No functional changes in this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 12:56:30 +00:00
{ 0x04, 0x08 }, { 0x05, 0x05 },
{ 0x04, 0x0e }, { 0x05, 0x00 },
{ 0x04, 0x0f }, { 0x05, 0x14 },
{ 0x04, 0x0b }, { 0x05, 0x8c },
{ 0x04, 0x00 }, { 0x05, 0x00 },
{ 0x04, 0x01 }, { 0x05, 0x07 },
{ 0x04, 0x02 }, { 0x05, 0x0f },
{ 0x04, 0x03 }, { 0x05, 0xa0 },
{ 0x04, 0x09 }, { 0x05, 0x00 },
{ 0x04, 0x0a }, { 0x05, 0xff },
{ 0x04, 0x27 }, { 0x05, 0x64 },
{ 0x04, 0x28 }, { 0x05, 0x00 },
{ 0x04, 0x1e }, { 0x05, 0xff },
{ 0x04, 0x29 }, { 0x05, 0x0a },
{ 0x04, 0x32 }, { 0x05, 0x0a },
{ 0x04, 0x14 }, { 0x05, 0x02 },
{ 0x04, 0x04 }, { 0x05, 0x00 },
{ 0x04, 0x05 }, { 0x05, 0x22 },
{ 0x04, 0x06 }, { 0x05, 0x0e },
{ 0x04, 0x07 }, { 0x05, 0xd8 },
{ 0x04, 0x12 }, { 0x05, 0x00 },
{ 0x04, 0x13 }, { 0x05, 0xff },
mb86a20s: Add a few more register settings at the init seq Some time ago, Manoel sent us a patch adding more stuff to the init sequence. However, his patch were also doing non-related stuff, by changing the init logic without any good reason. So, it was asked for him to submit a patch with just the data that has changed, in order to allow us to better analyze it. As he didn't what it was requested, I finally found some time to dig into his init sequence and add it here. Basically, new stuff is added there. There are a few changes: 1) The removal of the extra (duplicated) logic that puts the chip into the serial mode; 2) Some Viterbi VBER measurement init data was changed from 0x00 to 0xff for layer A, to match what was done for layers B and C. None of those caused any regressions and both make sense on my eyes. The other parameters additions actually increased the tuning quality for some channels. Yet, some channels that were previously discovered with scan disappered, while others appeared instead. This were tested in Brasilia, with an external antena. At the overall, it is now a little better. So, better to add these, and then try to figure out a configuration that would get even better scanning results. Reported-by: Manoel Pinheiro <pinusdtv@hotmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 13:00:28 +00:00
{ 0x04, 0x15 }, { 0x05, 0x4e },
{ 0x04, 0x16 }, { 0x05, 0x20 },
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
{ 0x52, 0x01 },
mb86a20s: Add a few more register settings at the init seq Some time ago, Manoel sent us a patch adding more stuff to the init sequence. However, his patch were also doing non-related stuff, by changing the init logic without any good reason. So, it was asked for him to submit a patch with just the data that has changed, in order to allow us to better analyze it. As he didn't what it was requested, I finally found some time to dig into his init sequence and add it here. Basically, new stuff is added there. There are a few changes: 1) The removal of the extra (duplicated) logic that puts the chip into the serial mode; 2) Some Viterbi VBER measurement init data was changed from 0x00 to 0xff for layer A, to match what was done for layers B and C. None of those caused any regressions and both make sense on my eyes. The other parameters additions actually increased the tuning quality for some channels. Yet, some channels that were previously discovered with scan disappered, while others appeared instead. This were tested in Brasilia, with an external antena. At the overall, it is now a little better. So, better to add these, and then try to figure out a configuration that would get even better scanning results. Reported-by: Manoel Pinheiro <pinusdtv@hotmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 13:00:28 +00:00
{ 0x50, 0xa7 }, { 0x51, 0xff },
mb86a20s: Group registers into the same line On mb86a20s, some registers have sub-addresses, while others not. In order to make easier to compare different settings, group them. No functional changes in this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 12:56:30 +00:00
{ 0x50, 0xa8 }, { 0x51, 0xff },
{ 0x50, 0xa9 }, { 0x51, 0xff },
mb86a20s: Add a few more register settings at the init seq Some time ago, Manoel sent us a patch adding more stuff to the init sequence. However, his patch were also doing non-related stuff, by changing the init logic without any good reason. So, it was asked for him to submit a patch with just the data that has changed, in order to allow us to better analyze it. As he didn't what it was requested, I finally found some time to dig into his init sequence and add it here. Basically, new stuff is added there. There are a few changes: 1) The removal of the extra (duplicated) logic that puts the chip into the serial mode; 2) Some Viterbi VBER measurement init data was changed from 0x00 to 0xff for layer A, to match what was done for layers B and C. None of those caused any regressions and both make sense on my eyes. The other parameters additions actually increased the tuning quality for some channels. Yet, some channels that were previously discovered with scan disappered, while others appeared instead. This were tested in Brasilia, with an external antena. At the overall, it is now a little better. So, better to add these, and then try to figure out a configuration that would get even better scanning results. Reported-by: Manoel Pinheiro <pinusdtv@hotmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 13:00:28 +00:00
{ 0x50, 0xaa }, { 0x51, 0xff },
mb86a20s: Group registers into the same line On mb86a20s, some registers have sub-addresses, while others not. In order to make easier to compare different settings, group them. No functional changes in this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 12:56:30 +00:00
{ 0x50, 0xab }, { 0x51, 0xff },
{ 0x50, 0xac }, { 0x51, 0xff },
mb86a20s: Add a few more register settings at the init seq Some time ago, Manoel sent us a patch adding more stuff to the init sequence. However, his patch were also doing non-related stuff, by changing the init logic without any good reason. So, it was asked for him to submit a patch with just the data that has changed, in order to allow us to better analyze it. As he didn't what it was requested, I finally found some time to dig into his init sequence and add it here. Basically, new stuff is added there. There are a few changes: 1) The removal of the extra (duplicated) logic that puts the chip into the serial mode; 2) Some Viterbi VBER measurement init data was changed from 0x00 to 0xff for layer A, to match what was done for layers B and C. None of those caused any regressions and both make sense on my eyes. The other parameters additions actually increased the tuning quality for some channels. Yet, some channels that were previously discovered with scan disappered, while others appeared instead. This were tested in Brasilia, with an external antena. At the overall, it is now a little better. So, better to add these, and then try to figure out a configuration that would get even better scanning results. Reported-by: Manoel Pinheiro <pinusdtv@hotmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 13:00:28 +00:00
{ 0x50, 0xad }, { 0x51, 0xff },
mb86a20s: Group registers into the same line On mb86a20s, some registers have sub-addresses, while others not. In order to make easier to compare different settings, group them. No functional changes in this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 12:56:30 +00:00
{ 0x50, 0xae }, { 0x51, 0xff },
{ 0x50, 0xaf }, { 0x51, 0xff },
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
{ 0x5e, 0x07 },
mb86a20s: Group registers into the same line On mb86a20s, some registers have sub-addresses, while others not. In order to make easier to compare different settings, group them. No functional changes in this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 12:56:30 +00:00
{ 0x50, 0xdc }, { 0x51, 0x01 },
{ 0x50, 0xdd }, { 0x51, 0xf4 },
{ 0x50, 0xde }, { 0x51, 0x01 },
{ 0x50, 0xdf }, { 0x51, 0xf4 },
{ 0x50, 0xe0 }, { 0x51, 0x01 },
{ 0x50, 0xe1 }, { 0x51, 0xf4 },
{ 0x50, 0xb0 }, { 0x51, 0x07 },
{ 0x50, 0xb2 }, { 0x51, 0xff },
{ 0x50, 0xb3 }, { 0x51, 0xff },
{ 0x50, 0xb4 }, { 0x51, 0xff },
{ 0x50, 0xb5 }, { 0x51, 0xff },
{ 0x50, 0xb6 }, { 0x51, 0xff },
{ 0x50, 0xb7 }, { 0x51, 0xff },
{ 0x50, 0x50 }, { 0x51, 0x02 },
{ 0x50, 0x51 }, { 0x51, 0x04 },
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
{ 0x45, 0x04 },
{ 0x48, 0x04 },
mb86a20s: Group registers into the same line On mb86a20s, some registers have sub-addresses, while others not. In order to make easier to compare different settings, group them. No functional changes in this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 12:56:30 +00:00
{ 0x50, 0xd5 }, { 0x51, 0x01 }, /* Serial */
{ 0x50, 0xd6 }, { 0x51, 0x1f },
{ 0x50, 0xd2 }, { 0x51, 0x03 },
{ 0x50, 0xd7 }, { 0x51, 0x3f },
mb86a20s: Add a few more register settings at the init seq Some time ago, Manoel sent us a patch adding more stuff to the init sequence. However, his patch were also doing non-related stuff, by changing the init logic without any good reason. So, it was asked for him to submit a patch with just the data that has changed, in order to allow us to better analyze it. As he didn't what it was requested, I finally found some time to dig into his init sequence and add it here. Basically, new stuff is added there. There are a few changes: 1) The removal of the extra (duplicated) logic that puts the chip into the serial mode; 2) Some Viterbi VBER measurement init data was changed from 0x00 to 0xff for layer A, to match what was done for layers B and C. None of those caused any regressions and both make sense on my eyes. The other parameters additions actually increased the tuning quality for some channels. Yet, some channels that were previously discovered with scan disappered, while others appeared instead. This were tested in Brasilia, with an external antena. At the overall, it is now a little better. So, better to add these, and then try to figure out a configuration that would get even better scanning results. Reported-by: Manoel Pinheiro <pinusdtv@hotmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 13:00:28 +00:00
{ 0x28, 0x74 }, { 0x29, 0x00 }, { 0x28, 0x74 }, { 0x29, 0x40 },
{ 0x28, 0x46 }, { 0x29, 0x2c }, { 0x28, 0x46 }, { 0x29, 0x0c },
{ 0x04, 0x40 }, { 0x05, 0x01 },
{ 0x28, 0x00 }, { 0x29, 0x10 },
{ 0x28, 0x05 }, { 0x29, 0x02 },
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
{ 0x1c, 0x01 },
mb86a20s: Group registers into the same line On mb86a20s, some registers have sub-addresses, while others not. In order to make easier to compare different settings, group them. No functional changes in this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 12:56:30 +00:00
{ 0x28, 0x06 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x03 },
{ 0x28, 0x07 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x0d },
{ 0x28, 0x08 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x02 },
{ 0x28, 0x09 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x01 },
{ 0x28, 0x0a }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x21 },
{ 0x28, 0x0b }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x29 },
{ 0x28, 0x0c }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x16 },
{ 0x28, 0x0d }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x31 },
{ 0x28, 0x0e }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x0e },
{ 0x28, 0x0f }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x4e },
{ 0x28, 0x10 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x46 },
{ 0x28, 0x11 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x0f },
{ 0x28, 0x12 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x56 },
{ 0x28, 0x13 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x35 },
{ 0x28, 0x14 }, { 0x29, 0x00 }, { 0x2a, 0x01 }, { 0x2b, 0xbe },
{ 0x28, 0x15 }, { 0x29, 0x00 }, { 0x2a, 0x01 }, { 0x2b, 0x84 },
{ 0x28, 0x16 }, { 0x29, 0x00 }, { 0x2a, 0x03 }, { 0x2b, 0xee },
{ 0x28, 0x17 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x98 },
{ 0x28, 0x18 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x9f },
{ 0x28, 0x19 }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0xb2 },
{ 0x28, 0x1a }, { 0x29, 0x00 }, { 0x2a, 0x06 }, { 0x2b, 0xc2 },
{ 0x28, 0x1b }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0x4a },
{ 0x28, 0x1c }, { 0x29, 0x00 }, { 0x2a, 0x01 }, { 0x2b, 0xbc },
{ 0x28, 0x1d }, { 0x29, 0x00 }, { 0x2a, 0x04 }, { 0x2b, 0xba },
{ 0x28, 0x1e }, { 0x29, 0x00 }, { 0x2a, 0x06 }, { 0x2b, 0x14 },
{ 0x50, 0x1e }, { 0x51, 0x5d },
{ 0x50, 0x22 }, { 0x51, 0x00 },
{ 0x50, 0x23 }, { 0x51, 0xc8 },
{ 0x50, 0x24 }, { 0x51, 0x00 },
{ 0x50, 0x25 }, { 0x51, 0xf0 },
{ 0x50, 0x26 }, { 0x51, 0x00 },
{ 0x50, 0x27 }, { 0x51, 0xc3 },
{ 0x50, 0x39 }, { 0x51, 0x02 },
mb86a20s: Add a few more register settings at the init seq Some time ago, Manoel sent us a patch adding more stuff to the init sequence. However, his patch were also doing non-related stuff, by changing the init logic without any good reason. So, it was asked for him to submit a patch with just the data that has changed, in order to allow us to better analyze it. As he didn't what it was requested, I finally found some time to dig into his init sequence and add it here. Basically, new stuff is added there. There are a few changes: 1) The removal of the extra (duplicated) logic that puts the chip into the serial mode; 2) Some Viterbi VBER measurement init data was changed from 0x00 to 0xff for layer A, to match what was done for layers B and C. None of those caused any regressions and both make sense on my eyes. The other parameters additions actually increased the tuning quality for some channels. Yet, some channels that were previously discovered with scan disappered, while others appeared instead. This were tested in Brasilia, with an external antena. At the overall, it is now a little better. So, better to add these, and then try to figure out a configuration that would get even better scanning results. Reported-by: Manoel Pinheiro <pinusdtv@hotmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-11 13:00:28 +00:00
{ 0x28, 0x6a }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x00 },
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
{ 0xd0, 0x00 },
};
static struct regdata mb86a20s_reset_reception[] = {
{ 0x70, 0xf0 },
{ 0x70, 0xff },
{ 0x08, 0x01 },
{ 0x08, 0x00 },
};
static int mb86a20s_i2c_writereg(struct mb86a20s_state *state,
u8 i2c_addr, int reg, int data)
{
u8 buf[] = { reg, data };
struct i2c_msg msg = {
.addr = i2c_addr, .flags = 0, .buf = buf, .len = 2
};
int rc;
rc = i2c_transfer(state->i2c, &msg, 1);
if (rc != 1) {
[media] mb86a20s: Fix i2c read/write error messages A script replaced err var to rc. Howerver, this script gambled "error" string, changing it to "rcor". Revert that bad change. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-14 11:50:00 +00:00
printk("%s: writereg error (rc == %i, reg == 0x%02x,"
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
" data == 0x%02x)\n", __func__, rc, reg, data);
return rc;
}
return 0;
}
static int mb86a20s_i2c_writeregdata(struct mb86a20s_state *state,
u8 i2c_addr, struct regdata *rd, int size)
{
int i, rc;
for (i = 0; i < size; i++) {
rc = mb86a20s_i2c_writereg(state, i2c_addr, rd[i].reg,
rd[i].data);
if (rc < 0)
return rc;
}
return 0;
}
static int mb86a20s_i2c_readreg(struct mb86a20s_state *state,
u8 i2c_addr, u8 reg)
{
u8 val;
int rc;
struct i2c_msg msg[] = {
{ .addr = i2c_addr, .flags = 0, .buf = &reg, .len = 1 },
{ .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
};
rc = i2c_transfer(state->i2c, msg, 2);
if (rc != 2) {
[media] mb86a20s: Fix i2c read/write error messages A script replaced err var to rc. Howerver, this script gambled "error" string, changing it to "rcor". Revert that bad change. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-14 11:50:00 +00:00
rc("%s: reg=0x%x (error=%d)\n", __func__, reg, rc);
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
return rc;
}
return val;
}
#define mb86a20s_readreg(state, reg) \
mb86a20s_i2c_readreg(state, state->config->demod_address, reg)
#define mb86a20s_writereg(state, reg, val) \
mb86a20s_i2c_writereg(state, state->config->demod_address, reg, val)
#define mb86a20s_writeregdata(state, regdata) \
mb86a20s_i2c_writeregdata(state, state->config->demod_address, \
regdata, ARRAY_SIZE(regdata))
static int mb86a20s_initfe(struct dvb_frontend *fe)
{
struct mb86a20s_state *state = fe->demodulator_priv;
int rc;
[media] mb86a20s: add support for serial streams By comparing the traffic between Pixelview (cx23102-based and Kworld (saa7134-based), the only difference is at register 0xd5. After some tests, It seems that it is used to change mode between serial and parallel. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-03 19:48:49 +00:00
u8 regD5 = 1;
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
dprintk("\n");
[media] Add support for Kworld SBTVD board Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-03 08:27:59 +00:00
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
/* Initialize the frontend */
rc = mb86a20s_writeregdata(state, mb86a20s_init);
if (rc < 0)
[media] mb86a20s: Be sure that device is initialized before starting DVB Due to a hard to track bug between tda829x/tda18271/saa7134, tda829x wants to go to analog mode during DVB initialization, causing some I2C errors. The analog failure doesn't cause any harm, as the device were already properly initialized in analog mode. However, the failure at the digital mode causes the frontend mb86a20s to not initialize. Fortunately, at least on my tests, it was possible to detect that the device is a mb86a20s before the failure. What happens is that tda8290 is a very bad boy: during DVB setup, it keeps insisting to call tda18271 analog_set_params, that calls tune_agc code. The tune_agc code calls saa7134 driver, changing the value of GPIO 27, switching from digital to analog mode and disabling the access to mb86a20s, as, on Kworld SBTVD, the same GPIO used to switch the hardware AGC mode seems to be used to enable the I2C switch that allows access to the frontend (mb86a20s). So, a call to analog_set_params ultimately disables the access to the frontend, and causes a failure at the init frontend logic. This patch is a workaround for this issue: it simply checks if the frontend init had any failure. If so, it will init the frontend when some DTV application will try to set DVB mode. Even being a hack for Kworld SBTVD to work, and assumning that we could teach tda8290 to be a good boy, this is actually an improvement at the frontend driver, as it will be more reliable to initialization failures. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-14 14:10:05 +00:00
goto err;
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
[media] mb86a20s: add support for serial streams By comparing the traffic between Pixelview (cx23102-based and Kworld (saa7134-based), the only difference is at register 0xd5. After some tests, It seems that it is used to change mode between serial and parallel. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-03 19:48:49 +00:00
if (!state->config->is_serial) {
regD5 &= ~1;
rc = mb86a20s_writereg(state, 0x50, 0xd5);
if (rc < 0)
[media] mb86a20s: Be sure that device is initialized before starting DVB Due to a hard to track bug between tda829x/tda18271/saa7134, tda829x wants to go to analog mode during DVB initialization, causing some I2C errors. The analog failure doesn't cause any harm, as the device were already properly initialized in analog mode. However, the failure at the digital mode causes the frontend mb86a20s to not initialize. Fortunately, at least on my tests, it was possible to detect that the device is a mb86a20s before the failure. What happens is that tda8290 is a very bad boy: during DVB setup, it keeps insisting to call tda18271 analog_set_params, that calls tune_agc code. The tune_agc code calls saa7134 driver, changing the value of GPIO 27, switching from digital to analog mode and disabling the access to mb86a20s, as, on Kworld SBTVD, the same GPIO used to switch the hardware AGC mode seems to be used to enable the I2C switch that allows access to the frontend (mb86a20s). So, a call to analog_set_params ultimately disables the access to the frontend, and causes a failure at the init frontend logic. This patch is a workaround for this issue: it simply checks if the frontend init had any failure. If so, it will init the frontend when some DTV application will try to set DVB mode. Even being a hack for Kworld SBTVD to work, and assumning that we could teach tda8290 to be a good boy, this is actually an improvement at the frontend driver, as it will be more reliable to initialization failures. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-14 14:10:05 +00:00
goto err;
[media] mb86a20s: add support for serial streams By comparing the traffic between Pixelview (cx23102-based and Kworld (saa7134-based), the only difference is at register 0xd5. After some tests, It seems that it is used to change mode between serial and parallel. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-03 19:48:49 +00:00
rc = mb86a20s_writereg(state, 0x51, regD5);
if (rc < 0)
[media] mb86a20s: Be sure that device is initialized before starting DVB Due to a hard to track bug between tda829x/tda18271/saa7134, tda829x wants to go to analog mode during DVB initialization, causing some I2C errors. The analog failure doesn't cause any harm, as the device were already properly initialized in analog mode. However, the failure at the digital mode causes the frontend mb86a20s to not initialize. Fortunately, at least on my tests, it was possible to detect that the device is a mb86a20s before the failure. What happens is that tda8290 is a very bad boy: during DVB setup, it keeps insisting to call tda18271 analog_set_params, that calls tune_agc code. The tune_agc code calls saa7134 driver, changing the value of GPIO 27, switching from digital to analog mode and disabling the access to mb86a20s, as, on Kworld SBTVD, the same GPIO used to switch the hardware AGC mode seems to be used to enable the I2C switch that allows access to the frontend (mb86a20s). So, a call to analog_set_params ultimately disables the access to the frontend, and causes a failure at the init frontend logic. This patch is a workaround for this issue: it simply checks if the frontend init had any failure. If so, it will init the frontend when some DTV application will try to set DVB mode. Even being a hack for Kworld SBTVD to work, and assumning that we could teach tda8290 to be a good boy, this is actually an improvement at the frontend driver, as it will be more reliable to initialization failures. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-14 14:10:05 +00:00
goto err;
[media] mb86a20s: add support for serial streams By comparing the traffic between Pixelview (cx23102-based and Kworld (saa7134-based), the only difference is at register 0xd5. After some tests, It seems that it is used to change mode between serial and parallel. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-03 19:48:49 +00:00
}
[media] Add support for Kworld SBTVD board Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-03 08:27:59 +00:00
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
[media] mb86a20s: Be sure that device is initialized before starting DVB Due to a hard to track bug between tda829x/tda18271/saa7134, tda829x wants to go to analog mode during DVB initialization, causing some I2C errors. The analog failure doesn't cause any harm, as the device were already properly initialized in analog mode. However, the failure at the digital mode causes the frontend mb86a20s to not initialize. Fortunately, at least on my tests, it was possible to detect that the device is a mb86a20s before the failure. What happens is that tda8290 is a very bad boy: during DVB setup, it keeps insisting to call tda18271 analog_set_params, that calls tune_agc code. The tune_agc code calls saa7134 driver, changing the value of GPIO 27, switching from digital to analog mode and disabling the access to mb86a20s, as, on Kworld SBTVD, the same GPIO used to switch the hardware AGC mode seems to be used to enable the I2C switch that allows access to the frontend (mb86a20s). So, a call to analog_set_params ultimately disables the access to the frontend, and causes a failure at the init frontend logic. This patch is a workaround for this issue: it simply checks if the frontend init had any failure. If so, it will init the frontend when some DTV application will try to set DVB mode. Even being a hack for Kworld SBTVD to work, and assumning that we could teach tda8290 to be a good boy, this is actually an improvement at the frontend driver, as it will be more reliable to initialization failures. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-14 14:10:05 +00:00
err:
if (rc < 0) {
state->need_init = true;
printk(KERN_INFO "mb86a20s: Init failed. Will try again later\n");
} else {
state->need_init = false;
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 01:57:33 +00:00
dprintk("Initialization succeeded.\n");
[media] mb86a20s: Be sure that device is initialized before starting DVB Due to a hard to track bug between tda829x/tda18271/saa7134, tda829x wants to go to analog mode during DVB initialization, causing some I2C errors. The analog failure doesn't cause any harm, as the device were already properly initialized in analog mode. However, the failure at the digital mode causes the frontend mb86a20s to not initialize. Fortunately, at least on my tests, it was possible to detect that the device is a mb86a20s before the failure. What happens is that tda8290 is a very bad boy: during DVB setup, it keeps insisting to call tda18271 analog_set_params, that calls tune_agc code. The tune_agc code calls saa7134 driver, changing the value of GPIO 27, switching from digital to analog mode and disabling the access to mb86a20s, as, on Kworld SBTVD, the same GPIO used to switch the hardware AGC mode seems to be used to enable the I2C switch that allows access to the frontend (mb86a20s). So, a call to analog_set_params ultimately disables the access to the frontend, and causes a failure at the init frontend logic. This patch is a workaround for this issue: it simply checks if the frontend init had any failure. If so, it will init the frontend when some DTV application will try to set DVB mode. Even being a hack for Kworld SBTVD to work, and assumning that we could teach tda8290 to be a good boy, this is actually an improvement at the frontend driver, as it will be more reliable to initialization failures. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-14 14:10:05 +00:00
}
return rc;
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
}
static int mb86a20s_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
{
struct mb86a20s_state *state = fe->demodulator_priv;
unsigned rf_max, rf_min, rf;
u8 val;
dprintk("\n");
[media] Add support for Kworld SBTVD board Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-03 08:27:59 +00:00
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
/* Does a binary search to get RF strength */
rf_max = 0xfff;
rf_min = 0;
do {
rf = (rf_max + rf_min) / 2;
mb86a20s_writereg(state, 0x04, 0x1f);
mb86a20s_writereg(state, 0x05, rf >> 8);
mb86a20s_writereg(state, 0x04, 0x20);
mb86a20s_writereg(state, 0x04, rf);
val = mb86a20s_readreg(state, 0x02);
if (val & 0x08)
rf_min = (rf_max + rf_min) / 2;
else
rf_max = (rf_max + rf_min) / 2;
if (rf_max - rf_min < 4) {
*strength = (((rf_max + rf_min) / 2) * 65535) / 4095;
break;
}
} while (1);
dprintk("signal strength = %d\n", *strength);
[media] Add support for Kworld SBTVD board Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-03 08:27:59 +00:00
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
return 0;
}
static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
struct mb86a20s_state *state = fe->demodulator_priv;
u8 val;
dprintk("\n");
*status = 0;
[media] Add support for Kworld SBTVD board Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-03 08:27:59 +00:00
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
val = mb86a20s_readreg(state, 0x0a) & 0xf;
[media] Add support for Kworld SBTVD board Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-03 08:27:59 +00:00
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
if (val >= 2)
*status |= FE_HAS_SIGNAL;
if (val >= 4)
*status |= FE_HAS_CARRIER;
if (val >= 5)
*status |= FE_HAS_VITERBI;
if (val >= 7)
*status |= FE_HAS_SYNC;
if (val >= 8) /* Maybe 9? */
*status |= FE_HAS_LOCK;
dprintk("val = %d, status = 0x%02x\n", val, *status);
return 0;
}
[media] mb86a20s: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Actually, this driver needs to fill/use the ISDB-T proprieties. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-26 15:11:51 +00:00
static int mb86a20s_set_frontend(struct dvb_frontend *fe)
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
{
struct mb86a20s_state *state = fe->demodulator_priv;
int rc;
[media] mb86a20s: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Actually, this driver needs to fill/use the ISDB-T proprieties. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-26 15:11:51 +00:00
#if 0
/*
* FIXME: Properly implement the set frontend properties
*/
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
#endif
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
dprintk("\n");
[media] Add support for Kworld SBTVD board Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-03 08:27:59 +00:00
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
[media] mb86a20s: Be sure that device is initialized before starting DVB Due to a hard to track bug between tda829x/tda18271/saa7134, tda829x wants to go to analog mode during DVB initialization, causing some I2C errors. The analog failure doesn't cause any harm, as the device were already properly initialized in analog mode. However, the failure at the digital mode causes the frontend mb86a20s to not initialize. Fortunately, at least on my tests, it was possible to detect that the device is a mb86a20s before the failure. What happens is that tda8290 is a very bad boy: during DVB setup, it keeps insisting to call tda18271 analog_set_params, that calls tune_agc code. The tune_agc code calls saa7134 driver, changing the value of GPIO 27, switching from digital to analog mode and disabling the access to mb86a20s, as, on Kworld SBTVD, the same GPIO used to switch the hardware AGC mode seems to be used to enable the I2C switch that allows access to the frontend (mb86a20s). So, a call to analog_set_params ultimately disables the access to the frontend, and causes a failure at the init frontend logic. This patch is a workaround for this issue: it simply checks if the frontend init had any failure. If so, it will init the frontend when some DTV application will try to set DVB mode. Even being a hack for Kworld SBTVD to work, and assumning that we could teach tda8290 to be a good boy, this is actually an improvement at the frontend driver, as it will be more reliable to initialization failures. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-14 14:10:05 +00:00
dprintk("Calling tuner set parameters\n");
[media] tuners: remove dvb_frontend_parameters from set_params() This is a big patch, yet trivial: now that all tuners use the DVBv5 way to pass parameters (e. g. via fe->dtv_property_cache), the extra parameter can be removed from set_params() call. After this change, very few DVBv3 specific stuff are left at the tuners. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-24 15:24:33 +00:00
fe->ops.tuner_ops.set_params(fe);
[media] Add support for Kworld SBTVD board Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-03 08:27:59 +00:00
[media] mb86a20s: Be sure that device is initialized before starting DVB Due to a hard to track bug between tda829x/tda18271/saa7134, tda829x wants to go to analog mode during DVB initialization, causing some I2C errors. The analog failure doesn't cause any harm, as the device were already properly initialized in analog mode. However, the failure at the digital mode causes the frontend mb86a20s to not initialize. Fortunately, at least on my tests, it was possible to detect that the device is a mb86a20s before the failure. What happens is that tda8290 is a very bad boy: during DVB setup, it keeps insisting to call tda18271 analog_set_params, that calls tune_agc code. The tune_agc code calls saa7134 driver, changing the value of GPIO 27, switching from digital to analog mode and disabling the access to mb86a20s, as, on Kworld SBTVD, the same GPIO used to switch the hardware AGC mode seems to be used to enable the I2C switch that allows access to the frontend (mb86a20s). So, a call to analog_set_params ultimately disables the access to the frontend, and causes a failure at the init frontend logic. This patch is a workaround for this issue: it simply checks if the frontend init had any failure. If so, it will init the frontend when some DTV application will try to set DVB mode. Even being a hack for Kworld SBTVD to work, and assumning that we could teach tda8290 to be a good boy, this is actually an improvement at the frontend driver, as it will be more reliable to initialization failures. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-14 14:10:05 +00:00
/*
* Make it more reliable: if, for some reason, the initial
* device initialization doesn't happen, initialize it when
* a SBTVD parameters are adjusted.
*
* Unfortunately, due to a hard to track bug at tda829x/tda18271,
* the agc callback logic is not called during DVB attach time,
* causing mb86a20s to not be initialized with Kworld SBTVD.
* So, this hack is needed, in order to make Kworld SBTVD to work.
*/
if (state->need_init)
mb86a20s_initfe(fe);
[media] Add support for Kworld SBTVD board Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-03 08:27:59 +00:00
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception);
[media] Add support for Kworld SBTVD board Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-03 08:27:59 +00:00
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
return rc;
}
[media] mb86a20s: implement get_frontend() Reports the auto-detected parameters to userspace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-09 20:16:36 +00:00
static int mb86a20s_get_modulation(struct mb86a20s_state *state,
unsigned layer)
{
int rc;
static unsigned char reg[] = {
[0] = 0x86, /* Layer A */
[1] = 0x8a, /* Layer B */
[2] = 0x8e, /* Layer C */
};
[media] mb86a20s: fix off by one checks Clearly ">=" was intended here instead of ">". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-13 05:28:34 +00:00
if (layer >= ARRAY_SIZE(reg))
[media] mb86a20s: implement get_frontend() Reports the auto-detected parameters to userspace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-09 20:16:36 +00:00
return -EINVAL;
rc = mb86a20s_writereg(state, 0x6d, reg[layer]);
if (rc < 0)
return rc;
rc = mb86a20s_readreg(state, 0x6e);
if (rc < 0)
return rc;
switch ((rc & 0x70) >> 4) {
case 0:
return DQPSK;
case 1:
return QPSK;
case 2:
return QAM_16;
case 3:
return QAM_64;
default:
return QAM_AUTO;
}
}
static int mb86a20s_get_fec(struct mb86a20s_state *state,
unsigned layer)
{
int rc;
static unsigned char reg[] = {
[0] = 0x87, /* Layer A */
[1] = 0x8b, /* Layer B */
[2] = 0x8f, /* Layer C */
};
[media] mb86a20s: fix off by one checks Clearly ">=" was intended here instead of ">". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-13 05:28:34 +00:00
if (layer >= ARRAY_SIZE(reg))
[media] mb86a20s: implement get_frontend() Reports the auto-detected parameters to userspace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-09 20:16:36 +00:00
return -EINVAL;
rc = mb86a20s_writereg(state, 0x6d, reg[layer]);
if (rc < 0)
return rc;
rc = mb86a20s_readreg(state, 0x6e);
if (rc < 0)
return rc;
switch (rc) {
case 0:
return FEC_1_2;
case 1:
return FEC_2_3;
case 2:
return FEC_3_4;
case 3:
return FEC_5_6;
case 4:
return FEC_7_8;
default:
return FEC_AUTO;
}
}
static int mb86a20s_get_interleaving(struct mb86a20s_state *state,
unsigned layer)
{
int rc;
static unsigned char reg[] = {
[0] = 0x88, /* Layer A */
[1] = 0x8c, /* Layer B */
[2] = 0x90, /* Layer C */
};
[media] mb86a20s: fix off by one checks Clearly ">=" was intended here instead of ">". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-13 05:28:34 +00:00
if (layer >= ARRAY_SIZE(reg))
[media] mb86a20s: implement get_frontend() Reports the auto-detected parameters to userspace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-09 20:16:36 +00:00
return -EINVAL;
rc = mb86a20s_writereg(state, 0x6d, reg[layer]);
if (rc < 0)
return rc;
rc = mb86a20s_readreg(state, 0x6e);
if (rc < 0)
return rc;
if (rc > 3)
return -EINVAL; /* Not used */
return rc;
}
static int mb86a20s_get_segment_count(struct mb86a20s_state *state,
unsigned layer)
{
int rc, count;
static unsigned char reg[] = {
[0] = 0x89, /* Layer A */
[1] = 0x8d, /* Layer B */
[2] = 0x91, /* Layer C */
};
[media] mb86a20s: fix off by one checks Clearly ">=" was intended here instead of ">". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-13 05:28:34 +00:00
if (layer >= ARRAY_SIZE(reg))
[media] mb86a20s: implement get_frontend() Reports the auto-detected parameters to userspace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-09 20:16:36 +00:00
return -EINVAL;
rc = mb86a20s_writereg(state, 0x6d, reg[layer]);
if (rc < 0)
return rc;
rc = mb86a20s_readreg(state, 0x6e);
if (rc < 0)
return rc;
count = (rc >> 4) & 0x0f;
return count;
}
[media] dvb: don't require a parameter for get_frontend Just like set_frontend, use the dvb cache properties for get_frontend. This is more consistent, as both functions are now symetric. Also, at the places get_frontend is called, it makes sense to update the cache. Most of this patch were generated by this small perl script: while (<>) { $file .= $_; } if ($file =~ m/\.get_frontend\s*=\s*([\d\w_]+)/) { my $get = $1; $file =~ s/($get)(\s*\([^\,\)]+)\,\s*struct\s+dtv_frontend_properties\s*\*\s*([_\d\w]+)\)\s*\{/\1\2)\n{\n\tstruct dtv_frontend_properties *\3 = &fe->dtv_property_cache;/g; } print $file; Of course, the changes at dvb_frontend.[ch] were made by hand, as well as the changes on a few other places, where get_frontend() is called internally inside the driver. On some places, get_frontend() were just a void function. Those occurrences were removed, as the DVB core handles such cases. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-30 14:30:21 +00:00
static int mb86a20s_get_frontend(struct dvb_frontend *fe)
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
{
[media] mb86a20s: implement get_frontend() Reports the auto-detected parameters to userspace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-09 20:16:36 +00:00
struct mb86a20s_state *state = fe->demodulator_priv;
[media] dvb: don't require a parameter for get_frontend Just like set_frontend, use the dvb cache properties for get_frontend. This is more consistent, as both functions are now symetric. Also, at the places get_frontend is called, it makes sense to update the cache. Most of this patch were generated by this small perl script: while (<>) { $file .= $_; } if ($file =~ m/\.get_frontend\s*=\s*([\d\w_]+)/) { my $get = $1; $file =~ s/($get)(\s*\([^\,\)]+)\,\s*struct\s+dtv_frontend_properties\s*\*\s*([_\d\w]+)\)\s*\{/\1\2)\n{\n\tstruct dtv_frontend_properties *\3 = &fe->dtv_property_cache;/g; } print $file; Of course, the changes at dvb_frontend.[ch] were made by hand, as well as the changes on a few other places, where get_frontend() is called internally inside the driver. On some places, get_frontend() were just a void function. Those occurrences were removed, as the DVB core handles such cases. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-30 14:30:21 +00:00
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
[media] mb86a20s: implement get_frontend() Reports the auto-detected parameters to userspace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-09 20:16:36 +00:00
int i, rc;
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
[media] mb86a20s: implement get_frontend() Reports the auto-detected parameters to userspace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-09 20:16:36 +00:00
/* Fixed parameters */
p->delivery_system = SYS_ISDBT;
[media] mb86a20s: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Actually, this driver needs to fill/use the ISDB-T proprieties. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-26 15:11:51 +00:00
p->bandwidth_hz = 6000000;
[media] mb86a20s: implement get_frontend() Reports the auto-detected parameters to userspace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-09 20:16:36 +00:00
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
/* Check for partial reception */
rc = mb86a20s_writereg(state, 0x6d, 0x85);
if (rc >= 0)
rc = mb86a20s_readreg(state, 0x6e);
if (rc >= 0)
p->isdbt_partial_reception = (rc & 0x10) ? 1 : 0;
/* Get per-layer data */
p->isdbt_layer_enabled = 0;
for (i = 0; i < 3; i++) {
rc = mb86a20s_get_segment_count(state, i);
if (rc >= 0 && rc < 14)
p->layer[i].segment_count = rc;
if (rc == 0x0f)
continue;
p->isdbt_layer_enabled |= 1 << i;
rc = mb86a20s_get_modulation(state, i);
if (rc >= 0)
p->layer[i].modulation = rc;
rc = mb86a20s_get_fec(state, i);
if (rc >= 0)
p->layer[i].fec = rc;
rc = mb86a20s_get_interleaving(state, i);
if (rc >= 0)
p->layer[i].interleaving = rc;
}
p->isdbt_sb_mode = 0;
rc = mb86a20s_writereg(state, 0x6d, 0x84);
if ((rc >= 0) && ((rc & 0x60) == 0x20)) {
p->isdbt_sb_mode = 1;
/* At least, one segment should exist */
if (!p->isdbt_sb_segment_count)
p->isdbt_sb_segment_count = 1;
} else
p->isdbt_sb_segment_count = 0;
/* Get transmission mode and guard interval */
[media] mb86a20s: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Actually, this driver needs to fill/use the ISDB-T proprieties. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-26 15:11:51 +00:00
p->transmission_mode = TRANSMISSION_MODE_AUTO;
p->guard_interval = GUARD_INTERVAL_AUTO;
[media] mb86a20s: implement get_frontend() Reports the auto-detected parameters to userspace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-09 20:16:36 +00:00
rc = mb86a20s_readreg(state, 0x07);
if (rc >= 0) {
if ((rc & 0x60) == 0x20) {
switch (rc & 0x0c >> 2) {
case 0:
p->transmission_mode = TRANSMISSION_MODE_2K;
break;
case 1:
p->transmission_mode = TRANSMISSION_MODE_4K;
break;
case 2:
p->transmission_mode = TRANSMISSION_MODE_8K;
break;
}
}
if (!(rc & 0x10)) {
switch (rc & 0x3) {
case 0:
p->guard_interval = GUARD_INTERVAL_1_4;
break;
case 1:
p->guard_interval = GUARD_INTERVAL_1_8;
break;
case 2:
p->guard_interval = GUARD_INTERVAL_1_16;
break;
}
}
}
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
return 0;
}
static int mb86a20s_tune(struct dvb_frontend *fe,
[media] dvb-core: Don't pass DVBv3 parameters on tune() fops As all parameters are passed via DVBv5 to the frontends, there's no need to pass them again via fops. Also, most drivers weren't using it anyway. So, instead, just pass a parameter to indicate if the hardware algorithm wants the driver to re-tune or not. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-26 20:48:33 +00:00
bool re_tune,
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
unsigned int mode_flags,
unsigned int *delay,
fe_status_t *status)
{
int rc = 0;
dprintk("\n");
[media] dvb-core: Don't pass DVBv3 parameters on tune() fops As all parameters are passed via DVBv5 to the frontends, there's no need to pass them again via fops. Also, most drivers weren't using it anyway. So, instead, just pass a parameter to indicate if the hardware algorithm wants the driver to re-tune or not. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-26 20:48:33 +00:00
if (re_tune)
[media] mb86a20s: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Actually, this driver needs to fill/use the ISDB-T proprieties. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-26 15:11:51 +00:00
rc = mb86a20s_set_frontend(fe);
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
mb86a20s_read_status(fe, status);
return rc;
}
static void mb86a20s_release(struct dvb_frontend *fe)
{
struct mb86a20s_state *state = fe->demodulator_priv;
dprintk("\n");
kfree(state);
}
static struct dvb_frontend_ops mb86a20s_ops;
struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config,
struct i2c_adapter *i2c)
{
u8 rev;
/* allocate memory for the internal state */
struct mb86a20s_state *state =
kzalloc(sizeof(struct mb86a20s_state), GFP_KERNEL);
dprintk("\n");
if (state == NULL) {
rc("Unable to kzalloc\n");
goto error;
}
/* setup the state */
state->config = config;
state->i2c = i2c;
/* create dvb_frontend */
memcpy(&state->frontend.ops, &mb86a20s_ops,
sizeof(struct dvb_frontend_ops));
state->frontend.demodulator_priv = state;
/* Check if it is a mb86a20s frontend */
rev = mb86a20s_readreg(state, 0);
if (rev == 0x13) {
printk(KERN_INFO "Detected a Fujitsu mb86a20s frontend\n");
} else {
printk(KERN_ERR "Frontend revision %d is unknown - aborting.\n",
rev);
goto error;
}
return &state->frontend;
error:
kfree(state);
return NULL;
}
EXPORT_SYMBOL(mb86a20s_attach);
static struct dvb_frontend_ops mb86a20s_ops = {
[media] mb86a20s: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Actually, this driver needs to fill/use the ISDB-T proprieties. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-26 15:11:51 +00:00
.delsys = { SYS_ISDBT },
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
/* Use dib8000 values per default */
.info = {
.name = "Fujitsu mb86A20s",
.caps = FE_CAN_INVERSION_AUTO | FE_CAN_RECOVER |
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_QAM_AUTO |
FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO,
/* Actually, those values depend on the used tuner */
.frequency_min = 45000000,
.frequency_max = 864000000,
.frequency_stepsize = 62500,
},
.release = mb86a20s_release,
.init = mb86a20s_initfe,
[media] mb86a20s: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Actually, this driver needs to fill/use the ISDB-T proprieties. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-26 15:11:51 +00:00
.set_frontend = mb86a20s_set_frontend,
.get_frontend = mb86a20s_get_frontend,
[media] add a driver for mb86a20s This adds the trivial bits to mb86a20s. As the driver won't touch at the channel/layer parameters, this may not be enough for receiving all channels, especially ISDB-Tsb, but the driver worked properly for receiving video channels on my tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27 23:52:43 +00:00
.read_status = mb86a20s_read_status,
.read_signal_strength = mb86a20s_read_signal_strength,
.tune = mb86a20s_tune,
};
MODULE_DESCRIPTION("DVB Frontend module for Fujitsu mb86A20s hardware");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
MODULE_LICENSE("GPL");