linux/arch/x86/kernel/vsyscall_64.c

311 lines
8.5 KiB
C
Raw Normal View History

/*
* Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE
* Copyright 2003 Andi Kleen, SuSE Labs.
*
* Thanks to hpa@transmeta.com for some useful hint.
* Special thanks to Ingo Molnar for his early experience with
* a different vsyscall implementation for Linux/IA32 and for the name.
*
* vsyscall 1 is located at -10Mbyte, vsyscall 2 is located
* at virtual address -10Mbyte+1024bytes etc... There are at max 4
* vsyscalls. One vsyscall can reserve more than 1 slot to avoid
* jumping out of line if necessary. We cannot add more with this
* mechanism because older kernels won't return -ENOSYS.
* If we want more than four we need a vDSO.
*
* Note: the concept clashes with user mode linux. If you use UML and
* want per guest time just set the kernel.vsyscall64 sysctl to 0.
*/
#include <linux/time.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/seqlock.h>
#include <linux/jiffies.h>
#include <linux/sysctl.h>
#include <linux/clocksource.h>
#include <linux/getcpu.h>
#include <linux/cpu.h>
#include <linux/smp.h>
#include <linux/notifier.h>
#include <asm/vsyscall.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/unistd.h>
#include <asm/fixmap.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/segment.h>
#include <asm/desc.h>
#include <asm/topology.h>
#include <asm/vgtod.h>
#define __vsyscall(nr) \
__attribute__ ((unused, __section__(".vsyscall_" #nr))) notrace
#define __syscall_clobber "r11","cx","memory"
/*
* vsyscall_gtod_data contains data that is :
* - readonly from vsyscalls
* - written by timer interrupt or systcl (/proc/sys/kernel/vsyscall64)
* Try to keep this structure as small as possible to avoid cache line ping pongs
*/
int __vgetcpu_mode __section_vgetcpu_mode;
struct vsyscall_gtod_data __vsyscall_gtod_data __section_vsyscall_gtod_data =
{
.lock = SEQLOCK_UNLOCKED,
.sysctl_enabled = 1,
};
void update_vsyscall_tz(void)
{
unsigned long flags;
write_seqlock_irqsave(&vsyscall_gtod_data.lock, flags);
/* sys_tz has changed */
vsyscall_gtod_data.sys_tz = sys_tz;
write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags);
}
void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
{
unsigned long flags;
write_seqlock_irqsave(&vsyscall_gtod_data.lock, flags);
/* copy vsyscall data */
vsyscall_gtod_data.clock.vread = clock->vread;
vsyscall_gtod_data.clock.cycle_last = clock->cycle_last;
vsyscall_gtod_data.clock.mask = clock->mask;
vsyscall_gtod_data.clock.mult = clock->mult;
vsyscall_gtod_data.clock.shift = clock->shift;
vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec;
vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec;
vsyscall_gtod_data.wall_to_monotonic = wall_to_monotonic;
write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags);
}
/* RED-PEN may want to readd seq locking, but then the variable should be
* write-once.
*/
static __always_inline void do_get_tz(struct timezone * tz)
{
*tz = __vsyscall_gtod_data.sys_tz;
}
static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz)
{
int ret;
asm volatile("syscall"
: "=a" (ret)
: "0" (__NR_gettimeofday),"D" (tv),"S" (tz)
: __syscall_clobber );
return ret;
}
static __always_inline long time_syscall(long *t)
{
long secs;
asm volatile("syscall"
: "=a" (secs)
: "0" (__NR_time),"D" (t) : __syscall_clobber);
return secs;
}
static __always_inline void do_vgettimeofday(struct timeval * tv)
{
cycle_t now, base, mask, cycle_delta;
unsigned seq;
unsigned long mult, shift, nsec;
cycle_t (*vread)(void);
do {
seq = read_seqbegin(&__vsyscall_gtod_data.lock);
vread = __vsyscall_gtod_data.clock.vread;
if (unlikely(!__vsyscall_gtod_data.sysctl_enabled || !vread)) {
gettimeofday(tv,NULL);
return;
}
now = vread();
base = __vsyscall_gtod_data.clock.cycle_last;
mask = __vsyscall_gtod_data.clock.mask;
mult = __vsyscall_gtod_data.clock.mult;
shift = __vsyscall_gtod_data.clock.shift;
tv->tv_sec = __vsyscall_gtod_data.wall_time_sec;
nsec = __vsyscall_gtod_data.wall_time_nsec;
} while (read_seqretry(&__vsyscall_gtod_data.lock, seq));
/* calculate interval: */
cycle_delta = (now - base) & mask;
/* convert to nsecs: */
nsec += (cycle_delta * mult) >> shift;
while (nsec >= NSEC_PER_SEC) {
tv->tv_sec += 1;
nsec -= NSEC_PER_SEC;
}
tv->tv_usec = nsec / NSEC_PER_USEC;
}
int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz)
{
if (tv)
do_vgettimeofday(tv);
if (tz)
do_get_tz(tz);
return 0;
}
/* This will break when the xtime seconds get inaccurate, but that is
* unlikely */
time_t __vsyscall(1) vtime(time_t *t)
{
struct timeval tv;
time_t result;
if (unlikely(!__vsyscall_gtod_data.sysctl_enabled))
return time_syscall(t);
vgettimeofday(&tv, NULL);
result = tv.tv_sec;
if (t)
*t = result;
return result;
}
/* Fast way to get current CPU and node.
This helps to do per node and per CPU caches in user space.
The result is not guaranteed without CPU affinity, but usually
works out because the scheduler tries to keep a thread on the same
CPU.
tcache must point to a two element sized long array.
All arguments can be NULL. */
long __vsyscall(2)
vgetcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache)
{
unsigned int p;
unsigned long j = 0;
/* Fast cache - only recompute value once per jiffies and avoid
relatively costly rdtscp/cpuid otherwise.
This works because the scheduler usually keeps the process
on the same CPU and this syscall doesn't guarantee its
results anyways.
We do this here because otherwise user space would do it on
its own in a likely inferior way (no access to jiffies).
If you don't like it pass NULL. */
if (tcache && tcache->blob[0] == (j = __jiffies)) {
p = tcache->blob[1];
} else if (__vgetcpu_mode == VGETCPU_RDTSCP) {
/* Load per CPU data from RDTSCP */
native_read_tscp(&p);
} else {
/* Load per CPU data from GDT */
asm("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG));
}
if (tcache) {
tcache->blob[0] = j;
tcache->blob[1] = p;
}
if (cpu)
*cpu = p & 0xfff;
if (node)
*node = p >> 12;
return 0;
}
static long __vsyscall(3) venosys_1(void)
{
return -ENOSYS;
}
#ifdef CONFIG_SYSCTL
static int
vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
}
static ctl_table kernel_table2[] = {
{ .procname = "vsyscall64",
.data = &vsyscall_gtod_data.sysctl_enabled, .maxlen = sizeof(int),
.mode = 0644,
.proc_handler = vsyscall_sysctl_change },
{}
};
static ctl_table kernel_root_table2[] = {
{ .ctl_name = CTL_KERN, .procname = "kernel", .mode = 0555,
.child = kernel_table2 },
{}
};
#endif
/* Assume __initcall executes before all user space. Hopefully kmod
doesn't violate that. We'll find out if it does. */
static void __cpuinit vsyscall_set_cpu(int cpu)
{
unsigned long d;
unsigned long node = 0;
#ifdef CONFIG_NUMA
x86: fix cpu_to_node references In x86_64 and i386 architectures most arrays that are sized using NR_CPUS lay in local memory on node 0. Not only will most (99%?) of the systems not use all the slots in these arrays, particularly when NR_CPUS is increased to accommodate future very high cpu count systems, but a number of cache lines are passed unnecessarily on the system bus when these arrays are referenced by cpus on other nodes. Typically, the values in these arrays are referenced by the cpu accessing it's own values, though when passing IPI interrupts, the cpu does access the data relevant to the targeted cpu/node. Of course, if the referencing cpu is not on node 0, then the reference will still require cross node exchanges of cache lines. A common use of this is for an interrupt service routine to pass the interrupt to other cpus local to that node. Ideally, all the elements in these arrays should be moved to the per_cpu data area. In some cases (such as x86_cpu_to_apicid) the array is referenced before the per_cpu data areas are setup. In this case, a static array is declared in the __initdata area and initialized by the booting cpu (BSP). The values are then moved to the per_cpu area after it is initialized and the original static array is freed with the rest of the __initdata. This patch: Fix four instances where cpu_to_node is referenced by array instead of via the cpu_to_node macro. This is preparation to moving it to the per_cpu data area. Signed-off-by: Mike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17 16:04:39 +00:00
node = cpu_to_node(cpu);
#endif
if (cpu_has(&cpu_data(cpu), X86_FEATURE_RDTSCP))
write_rdtscp_aux((node << 12) | cpu);
/* Store cpu number in limit so that it can be loaded quickly
in user space in vgetcpu.
12 bits for the CPU and 8 bits for the node. */
d = 0x0f40000000000ULL;
d |= cpu;
d |= (node & 0xf) << 12;
d |= (node >> 4) << 48;
write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_PER_CPU, &d, DESCTYPE_S);
}
static void __cpuinit cpu_vsyscall_init(void *arg)
{
/* preemption should be already off */
vsyscall_set_cpu(raw_smp_processor_id());
}
static int __cpuinit
cpu_vsyscall_notifier(struct notifier_block *n, unsigned long action, void *arg)
{
long cpu = (long)arg;
if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN)
smp_call_function_single(cpu, cpu_vsyscall_init, NULL, 1);
return NOTIFY_DONE;
}
void __init map_vsyscall(void)
{
extern char __vsyscall_0;
unsigned long physaddr_page0 = __pa_symbol(&__vsyscall_0);
/* Note that VSYSCALL_MAPPED_PAGES must agree with the code below. */
__set_fixmap(VSYSCALL_FIRST_PAGE, physaddr_page0, PAGE_KERNEL_VSYSCALL);
}
static int __init vsyscall_init(void)
{
BUG_ON(((unsigned long) &vgettimeofday !=
VSYSCALL_ADDR(__NR_vgettimeofday)));
BUG_ON((unsigned long) &vtime != VSYSCALL_ADDR(__NR_vtime));
BUG_ON((VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE)));
BUG_ON((unsigned long) &vgetcpu != VSYSCALL_ADDR(__NR_vgetcpu));
#ifdef CONFIG_SYSCTL
[PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:09 +00:00
register_sysctl_table(kernel_root_table2);
#endif
on_each_cpu(cpu_vsyscall_init, NULL, 1);
hotcpu_notifier(cpu_vsyscall_notifier, 0);
return 0;
}
__initcall(vsyscall_init);