xen/pciback: xen pci backend driver.
This is the host side counterpart to the frontend driver in
drivers/pci/xen-pcifront.c. The PV protocol is also implemented by
frontend drivers in other OSes too, such as the BSDs.
The PV protocol is rather simple. There is page shared with the guest,
which has the 'struct xen_pci_sharedinfo' embossed in it. The backend
has a thread that is kicked every-time the structure is changed and
based on the operation field it performs specific tasks:
XEN_PCI_OP_conf_[read|write]:
Read/Write 0xCF8/0xCFC filtered data. (conf_space*.c)
Based on which field is probed, we either enable/disable the PCI
device, change power state, read VPD, etc. The major goal of this
call is to provide a Physical IRQ (PIRQ) to the guest.
The PIRQ is Xen hypervisor global IRQ value irrespective of the IRQ
is tied in to the IO-APIC, or is a vector. For GSI type
interrupts, the PIRQ==GSI holds. For MSI/MSI-X the
PIRQ value != Linux IRQ number (thought PIRQ==vector).
Please note, that with Xen, all interrupts (except those level shared ones)
are injected directly to the guest - there is no host interaction.
XEN_PCI_OP_[enable|disable]_msi[|x] (pciback_ops.c)
Enables/disables the MSI/MSI-X capability of the device. These operations
setup the MSI/MSI-X vectors for the guest and pass them to the frontend.
When the device is activated, the interrupts are directly injected in the
guest without involving the host.
XEN_PCI_OP_aer_[detected|resume|mmio|slotreset]: In case of failure,
perform the appropriate AER commands on the guest. Right now that is
a cop-out - we just kill the guest.
Besides implementing those commands, it can also
- hide a PCI device from the host. When booting up, the user can specify
xen-pciback.hide=(1:0:0)(BDF..) so that host does not try to use the
device.
The driver was lifted from linux-2.6.18.hg tree and fixed up
so that it could compile under v3.0. Per suggestion from Jesse Barnes
moved the driver to drivers/xen/xen-pciback.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-10-13 21:22:20 +00:00
|
|
|
/*
|
|
|
|
* PCI Stub Driver - Grabs devices in backend to be exported later
|
|
|
|
*
|
|
|
|
* Ryan Wilson <hap9@epoch.ncsc.mil>
|
|
|
|
* Chris Bookholt <hap10@epoch.ncsc.mil>
|
|
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/rwsem.h>
|
|
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <linux/kref.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/wait.h>
|
|
|
|
#include <linux/sched.h>
|
2011-07-20 00:09:43 +00:00
|
|
|
#include <linux/atomic.h>
|
xen/pciback: xen pci backend driver.
This is the host side counterpart to the frontend driver in
drivers/pci/xen-pcifront.c. The PV protocol is also implemented by
frontend drivers in other OSes too, such as the BSDs.
The PV protocol is rather simple. There is page shared with the guest,
which has the 'struct xen_pci_sharedinfo' embossed in it. The backend
has a thread that is kicked every-time the structure is changed and
based on the operation field it performs specific tasks:
XEN_PCI_OP_conf_[read|write]:
Read/Write 0xCF8/0xCFC filtered data. (conf_space*.c)
Based on which field is probed, we either enable/disable the PCI
device, change power state, read VPD, etc. The major goal of this
call is to provide a Physical IRQ (PIRQ) to the guest.
The PIRQ is Xen hypervisor global IRQ value irrespective of the IRQ
is tied in to the IO-APIC, or is a vector. For GSI type
interrupts, the PIRQ==GSI holds. For MSI/MSI-X the
PIRQ value != Linux IRQ number (thought PIRQ==vector).
Please note, that with Xen, all interrupts (except those level shared ones)
are injected directly to the guest - there is no host interaction.
XEN_PCI_OP_[enable|disable]_msi[|x] (pciback_ops.c)
Enables/disables the MSI/MSI-X capability of the device. These operations
setup the MSI/MSI-X vectors for the guest and pass them to the frontend.
When the device is activated, the interrupts are directly injected in the
guest without involving the host.
XEN_PCI_OP_aer_[detected|resume|mmio|slotreset]: In case of failure,
perform the appropriate AER commands on the guest. Right now that is
a cop-out - we just kill the guest.
Besides implementing those commands, it can also
- hide a PCI device from the host. When booting up, the user can specify
xen-pciback.hide=(1:0:0)(BDF..) so that host does not try to use the
device.
The driver was lifted from linux-2.6.18.hg tree and fixed up
so that it could compile under v3.0. Per suggestion from Jesse Barnes
moved the driver to drivers/xen/xen-pciback.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-10-13 21:22:20 +00:00
|
|
|
#include <xen/events.h>
|
|
|
|
#include <asm/xen/pci.h>
|
|
|
|
#include <asm/xen/hypervisor.h>
|
|
|
|
#include "pciback.h"
|
|
|
|
#include "conf_space.h"
|
|
|
|
#include "conf_space_quirks.h"
|
|
|
|
|
|
|
|
static char *pci_devs_to_hide;
|
|
|
|
wait_queue_head_t aer_wait_queue;
|
|
|
|
/*Add sem for sync AER handling and pciback remove/reconfigue ops,
|
|
|
|
* We want to avoid in middle of AER ops, pciback devices is being removed
|
|
|
|
*/
|
|
|
|
static DECLARE_RWSEM(pcistub_sem);
|
|
|
|
module_param_named(hide, pci_devs_to_hide, charp, 0444);
|
|
|
|
|
|
|
|
struct pcistub_device_id {
|
|
|
|
struct list_head slot_list;
|
|
|
|
int domain;
|
|
|
|
unsigned char bus;
|
|
|
|
unsigned int devfn;
|
|
|
|
};
|
|
|
|
static LIST_HEAD(pcistub_device_ids);
|
|
|
|
static DEFINE_SPINLOCK(device_ids_lock);
|
|
|
|
|
|
|
|
struct pcistub_device {
|
|
|
|
struct kref kref;
|
|
|
|
struct list_head dev_list;
|
|
|
|
spinlock_t lock;
|
|
|
|
|
|
|
|
struct pci_dev *dev;
|
|
|
|
struct pciback_device *pdev;/* non-NULL if struct pci_dev is in use */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Access to pcistub_devices & seized_devices lists and the initialize_devices
|
|
|
|
* flag must be locked with pcistub_devices_lock
|
|
|
|
*/
|
|
|
|
static DEFINE_SPINLOCK(pcistub_devices_lock);
|
|
|
|
static LIST_HEAD(pcistub_devices);
|
|
|
|
|
|
|
|
/* wait for device_initcall before initializing our devices
|
|
|
|
* (see pcistub_init_devices_late)
|
|
|
|
*/
|
|
|
|
static int initialize_devices;
|
|
|
|
static LIST_HEAD(seized_devices);
|
|
|
|
|
|
|
|
static struct pcistub_device *pcistub_device_alloc(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
struct pcistub_device *psdev;
|
|
|
|
|
|
|
|
dev_dbg(&dev->dev, "pcistub_device_alloc\n");
|
|
|
|
|
|
|
|
psdev = kzalloc(sizeof(*psdev), GFP_ATOMIC);
|
|
|
|
if (!psdev)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
psdev->dev = pci_dev_get(dev);
|
|
|
|
if (!psdev->dev) {
|
|
|
|
kfree(psdev);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
kref_init(&psdev->kref);
|
|
|
|
spin_lock_init(&psdev->lock);
|
|
|
|
|
|
|
|
return psdev;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Don't call this directly as it's called by pcistub_device_put */
|
|
|
|
static void pcistub_device_release(struct kref *kref)
|
|
|
|
{
|
|
|
|
struct pcistub_device *psdev;
|
|
|
|
|
|
|
|
psdev = container_of(kref, struct pcistub_device, kref);
|
|
|
|
|
|
|
|
dev_dbg(&psdev->dev->dev, "pcistub_device_release\n");
|
|
|
|
|
|
|
|
/* Clean-up the device */
|
|
|
|
pciback_reset_device(psdev->dev);
|
|
|
|
pciback_config_free_dyn_fields(psdev->dev);
|
|
|
|
pciback_config_free_dev(psdev->dev);
|
|
|
|
kfree(pci_get_drvdata(psdev->dev));
|
|
|
|
pci_set_drvdata(psdev->dev, NULL);
|
|
|
|
|
|
|
|
pci_dev_put(psdev->dev);
|
|
|
|
|
|
|
|
kfree(psdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void pcistub_device_get(struct pcistub_device *psdev)
|
|
|
|
{
|
|
|
|
kref_get(&psdev->kref);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void pcistub_device_put(struct pcistub_device *psdev)
|
|
|
|
{
|
|
|
|
kref_put(&psdev->kref, pcistub_device_release);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct pcistub_device *pcistub_device_find(int domain, int bus,
|
|
|
|
int slot, int func)
|
|
|
|
{
|
|
|
|
struct pcistub_device *psdev = NULL;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
list_for_each_entry(psdev, &pcistub_devices, dev_list) {
|
|
|
|
if (psdev->dev != NULL
|
|
|
|
&& domain == pci_domain_nr(psdev->dev->bus)
|
|
|
|
&& bus == psdev->dev->bus->number
|
|
|
|
&& PCI_DEVFN(slot, func) == psdev->dev->devfn) {
|
|
|
|
pcistub_device_get(psdev);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* didn't find it */
|
|
|
|
psdev = NULL;
|
|
|
|
|
|
|
|
out:
|
|
|
|
spin_unlock_irqrestore(&pcistub_devices_lock, flags);
|
|
|
|
return psdev;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct pci_dev *pcistub_device_get_pci_dev(struct pciback_device *pdev,
|
|
|
|
struct pcistub_device *psdev)
|
|
|
|
{
|
|
|
|
struct pci_dev *pci_dev = NULL;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
pcistub_device_get(psdev);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&psdev->lock, flags);
|
|
|
|
if (!psdev->pdev) {
|
|
|
|
psdev->pdev = pdev;
|
|
|
|
pci_dev = psdev->dev;
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&psdev->lock, flags);
|
|
|
|
|
|
|
|
if (!pci_dev)
|
|
|
|
pcistub_device_put(psdev);
|
|
|
|
|
|
|
|
return pci_dev;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct pci_dev *pcistub_get_pci_dev_by_slot(struct pciback_device *pdev,
|
|
|
|
int domain, int bus,
|
|
|
|
int slot, int func)
|
|
|
|
{
|
|
|
|
struct pcistub_device *psdev;
|
|
|
|
struct pci_dev *found_dev = NULL;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
list_for_each_entry(psdev, &pcistub_devices, dev_list) {
|
|
|
|
if (psdev->dev != NULL
|
|
|
|
&& domain == pci_domain_nr(psdev->dev->bus)
|
|
|
|
&& bus == psdev->dev->bus->number
|
|
|
|
&& PCI_DEVFN(slot, func) == psdev->dev->devfn) {
|
|
|
|
found_dev = pcistub_device_get_pci_dev(pdev, psdev);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&pcistub_devices_lock, flags);
|
|
|
|
return found_dev;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct pci_dev *pcistub_get_pci_dev(struct pciback_device *pdev,
|
|
|
|
struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
struct pcistub_device *psdev;
|
|
|
|
struct pci_dev *found_dev = NULL;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
list_for_each_entry(psdev, &pcistub_devices, dev_list) {
|
|
|
|
if (psdev->dev == dev) {
|
|
|
|
found_dev = pcistub_device_get_pci_dev(pdev, psdev);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&pcistub_devices_lock, flags);
|
|
|
|
return found_dev;
|
|
|
|
}
|
|
|
|
|
|
|
|
void pcistub_put_pci_dev(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
struct pcistub_device *psdev, *found_psdev = NULL;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
list_for_each_entry(psdev, &pcistub_devices, dev_list) {
|
|
|
|
if (psdev->dev == dev) {
|
|
|
|
found_psdev = psdev;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
/*hold this lock for avoiding breaking link between
|
|
|
|
* pcistub and pciback when AER is in processing
|
|
|
|
*/
|
|
|
|
down_write(&pcistub_sem);
|
|
|
|
/* Cleanup our device
|
|
|
|
* (so it's ready for the next domain)
|
|
|
|
*/
|
|
|
|
pciback_reset_device(found_psdev->dev);
|
|
|
|
pciback_config_free_dyn_fields(found_psdev->dev);
|
|
|
|
pciback_config_reset_dev(found_psdev->dev);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&found_psdev->lock, flags);
|
|
|
|
found_psdev->pdev = NULL;
|
|
|
|
spin_unlock_irqrestore(&found_psdev->lock, flags);
|
|
|
|
|
|
|
|
pcistub_device_put(found_psdev);
|
|
|
|
up_write(&pcistub_sem);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit pcistub_match_one(struct pci_dev *dev,
|
|
|
|
struct pcistub_device_id *pdev_id)
|
|
|
|
{
|
|
|
|
/* Match the specified device by domain, bus, slot, func and also if
|
|
|
|
* any of the device's parent bridges match.
|
|
|
|
*/
|
|
|
|
for (; dev != NULL; dev = dev->bus->self) {
|
|
|
|
if (pci_domain_nr(dev->bus) == pdev_id->domain
|
|
|
|
&& dev->bus->number == pdev_id->bus
|
|
|
|
&& dev->devfn == pdev_id->devfn)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
/* Sometimes topmost bridge links to itself. */
|
|
|
|
if (dev == dev->bus->self)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit pcistub_match(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
struct pcistub_device_id *pdev_id;
|
|
|
|
unsigned long flags;
|
|
|
|
int found = 0;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&device_ids_lock, flags);
|
|
|
|
list_for_each_entry(pdev_id, &pcistub_device_ids, slot_list) {
|
|
|
|
if (pcistub_match_one(dev, pdev_id)) {
|
|
|
|
found = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&device_ids_lock, flags);
|
|
|
|
|
|
|
|
return found;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit pcistub_init_device(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
struct pciback_dev_data *dev_data;
|
|
|
|
int err = 0;
|
|
|
|
|
|
|
|
dev_dbg(&dev->dev, "initializing...\n");
|
|
|
|
|
|
|
|
/* The PCI backend is not intended to be a module (or to work with
|
|
|
|
* removable PCI devices (yet). If it were, pciback_config_free()
|
|
|
|
* would need to be called somewhere to free the memory allocated
|
|
|
|
* here and then to call kfree(pci_get_drvdata(psdev->dev)).
|
|
|
|
*/
|
|
|
|
dev_data = kzalloc(sizeof(*dev_data), GFP_ATOMIC);
|
|
|
|
if (!dev_data) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
pci_set_drvdata(dev, dev_data);
|
|
|
|
|
|
|
|
dev_dbg(&dev->dev, "initializing config\n");
|
|
|
|
|
|
|
|
init_waitqueue_head(&aer_wait_queue);
|
|
|
|
err = pciback_config_init_dev(dev);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* HACK: Force device (& ACPI) to determine what IRQ it's on - we
|
|
|
|
* must do this here because pcibios_enable_device may specify
|
|
|
|
* the pci device's true irq (and possibly its other resources)
|
|
|
|
* if they differ from what's in the configuration space.
|
|
|
|
* This makes the assumption that the device's resources won't
|
|
|
|
* change after this point (otherwise this code may break!)
|
|
|
|
*/
|
|
|
|
dev_dbg(&dev->dev, "enabling device\n");
|
|
|
|
err = pci_enable_device(dev);
|
|
|
|
if (err)
|
|
|
|
goto config_release;
|
|
|
|
|
|
|
|
/* Now disable the device (this also ensures some private device
|
|
|
|
* data is setup before we export)
|
|
|
|
*/
|
|
|
|
dev_dbg(&dev->dev, "reset device\n");
|
|
|
|
pciback_reset_device(dev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
config_release:
|
|
|
|
pciback_config_free_dev(dev);
|
|
|
|
|
|
|
|
out:
|
|
|
|
pci_set_drvdata(dev, NULL);
|
|
|
|
kfree(dev_data);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Because some initialization still happens on
|
|
|
|
* devices during fs_initcall, we need to defer
|
|
|
|
* full initialization of our devices until
|
|
|
|
* device_initcall.
|
|
|
|
*/
|
|
|
|
static int __init pcistub_init_devices_late(void)
|
|
|
|
{
|
|
|
|
struct pcistub_device *psdev;
|
|
|
|
unsigned long flags;
|
|
|
|
int err = 0;
|
|
|
|
|
|
|
|
pr_debug("pciback: pcistub_init_devices_late\n");
|
|
|
|
|
|
|
|
spin_lock_irqsave(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
while (!list_empty(&seized_devices)) {
|
|
|
|
psdev = container_of(seized_devices.next,
|
|
|
|
struct pcistub_device, dev_list);
|
|
|
|
list_del(&psdev->dev_list);
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
err = pcistub_init_device(psdev->dev);
|
|
|
|
if (err) {
|
|
|
|
dev_err(&psdev->dev->dev,
|
|
|
|
"error %d initializing device\n", err);
|
|
|
|
kfree(psdev);
|
|
|
|
psdev = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irqsave(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
if (psdev)
|
|
|
|
list_add_tail(&psdev->dev_list, &pcistub_devices);
|
|
|
|
}
|
|
|
|
|
|
|
|
initialize_devices = 1;
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit pcistub_seize(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
struct pcistub_device *psdev;
|
|
|
|
unsigned long flags;
|
|
|
|
int err = 0;
|
|
|
|
|
|
|
|
psdev = pcistub_device_alloc(dev);
|
|
|
|
if (!psdev)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
if (initialize_devices) {
|
|
|
|
spin_unlock_irqrestore(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
/* don't want irqs disabled when calling pcistub_init_device */
|
|
|
|
err = pcistub_init_device(psdev->dev);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
if (!err)
|
|
|
|
list_add(&psdev->dev_list, &pcistub_devices);
|
|
|
|
} else {
|
|
|
|
dev_dbg(&dev->dev, "deferring initialization\n");
|
|
|
|
list_add(&psdev->dev_list, &seized_devices);
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
if (err)
|
|
|
|
pcistub_device_put(psdev);
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit pcistub_probe(struct pci_dev *dev,
|
|
|
|
const struct pci_device_id *id)
|
|
|
|
{
|
|
|
|
int err = 0;
|
|
|
|
|
|
|
|
dev_dbg(&dev->dev, "probing...\n");
|
|
|
|
|
|
|
|
if (pcistub_match(dev)) {
|
|
|
|
|
|
|
|
if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL
|
|
|
|
&& dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
|
|
|
|
dev_err(&dev->dev, "can't export pci devices that "
|
|
|
|
"don't have a normal (0) or bridge (1) "
|
|
|
|
"header type!\n");
|
|
|
|
err = -ENODEV;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_info(&dev->dev, "seizing device\n");
|
|
|
|
err = pcistub_seize(dev);
|
|
|
|
} else
|
|
|
|
/* Didn't find the device */
|
|
|
|
err = -ENODEV;
|
|
|
|
|
|
|
|
out:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pcistub_remove(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
struct pcistub_device *psdev, *found_psdev = NULL;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
dev_dbg(&dev->dev, "removing\n");
|
|
|
|
|
|
|
|
spin_lock_irqsave(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
pciback_config_quirk_release(dev);
|
|
|
|
|
|
|
|
list_for_each_entry(psdev, &pcistub_devices, dev_list) {
|
|
|
|
if (psdev->dev == dev) {
|
|
|
|
found_psdev = psdev;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
if (found_psdev) {
|
|
|
|
dev_dbg(&dev->dev, "found device to remove - in use? %p\n",
|
|
|
|
found_psdev->pdev);
|
|
|
|
|
|
|
|
if (found_psdev->pdev) {
|
|
|
|
printk(KERN_WARNING "pciback: ****** removing device "
|
|
|
|
"%s while still in-use! ******\n",
|
|
|
|
pci_name(found_psdev->dev));
|
|
|
|
printk(KERN_WARNING "pciback: ****** driver domain may "
|
|
|
|
"still access this device's i/o resources!\n");
|
|
|
|
printk(KERN_WARNING "pciback: ****** shutdown driver "
|
|
|
|
"domain before binding device\n");
|
|
|
|
printk(KERN_WARNING "pciback: ****** to other drivers "
|
|
|
|
"or domains\n");
|
|
|
|
|
|
|
|
pciback_release_pci_dev(found_psdev->pdev,
|
|
|
|
found_psdev->dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irqsave(&pcistub_devices_lock, flags);
|
|
|
|
list_del(&found_psdev->dev_list);
|
|
|
|
spin_unlock_irqrestore(&pcistub_devices_lock, flags);
|
|
|
|
|
|
|
|
/* the final put for releasing from the list */
|
|
|
|
pcistub_device_put(found_psdev);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-07-20 00:09:43 +00:00
|
|
|
static DEFINE_PCI_DEVICE_TABLE(pcistub_ids) = {
|
xen/pciback: xen pci backend driver.
This is the host side counterpart to the frontend driver in
drivers/pci/xen-pcifront.c. The PV protocol is also implemented by
frontend drivers in other OSes too, such as the BSDs.
The PV protocol is rather simple. There is page shared with the guest,
which has the 'struct xen_pci_sharedinfo' embossed in it. The backend
has a thread that is kicked every-time the structure is changed and
based on the operation field it performs specific tasks:
XEN_PCI_OP_conf_[read|write]:
Read/Write 0xCF8/0xCFC filtered data. (conf_space*.c)
Based on which field is probed, we either enable/disable the PCI
device, change power state, read VPD, etc. The major goal of this
call is to provide a Physical IRQ (PIRQ) to the guest.
The PIRQ is Xen hypervisor global IRQ value irrespective of the IRQ
is tied in to the IO-APIC, or is a vector. For GSI type
interrupts, the PIRQ==GSI holds. For MSI/MSI-X the
PIRQ value != Linux IRQ number (thought PIRQ==vector).
Please note, that with Xen, all interrupts (except those level shared ones)
are injected directly to the guest - there is no host interaction.
XEN_PCI_OP_[enable|disable]_msi[|x] (pciback_ops.c)
Enables/disables the MSI/MSI-X capability of the device. These operations
setup the MSI/MSI-X vectors for the guest and pass them to the frontend.
When the device is activated, the interrupts are directly injected in the
guest without involving the host.
XEN_PCI_OP_aer_[detected|resume|mmio|slotreset]: In case of failure,
perform the appropriate AER commands on the guest. Right now that is
a cop-out - we just kill the guest.
Besides implementing those commands, it can also
- hide a PCI device from the host. When booting up, the user can specify
xen-pciback.hide=(1:0:0)(BDF..) so that host does not try to use the
device.
The driver was lifted from linux-2.6.18.hg tree and fixed up
so that it could compile under v3.0. Per suggestion from Jesse Barnes
moved the driver to drivers/xen/xen-pciback.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-10-13 21:22:20 +00:00
|
|
|
{
|
|
|
|
.vendor = PCI_ANY_ID,
|
|
|
|
.device = PCI_ANY_ID,
|
|
|
|
.subvendor = PCI_ANY_ID,
|
|
|
|
.subdevice = PCI_ANY_ID,
|
|
|
|
},
|
|
|
|
{0,},
|
|
|
|
};
|
|
|
|
|
|
|
|
#define PCI_NODENAME_MAX 40
|
|
|
|
static void kill_domain_by_device(struct pcistub_device *psdev)
|
|
|
|
{
|
|
|
|
struct xenbus_transaction xbt;
|
|
|
|
int err;
|
|
|
|
char nodename[PCI_NODENAME_MAX];
|
|
|
|
|
|
|
|
if (!psdev)
|
|
|
|
dev_err(&psdev->dev->dev,
|
|
|
|
"device is NULL when do AER recovery/kill_domain\n");
|
|
|
|
snprintf(nodename, PCI_NODENAME_MAX, "/local/domain/0/backend/pci/%d/0",
|
|
|
|
psdev->pdev->xdev->otherend_id);
|
|
|
|
nodename[strlen(nodename)] = '\0';
|
|
|
|
|
|
|
|
again:
|
|
|
|
err = xenbus_transaction_start(&xbt);
|
|
|
|
if (err) {
|
|
|
|
dev_err(&psdev->dev->dev,
|
|
|
|
"error %d when start xenbus transaction\n", err);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
/*PV AER handlers will set this flag*/
|
|
|
|
xenbus_printf(xbt, nodename, "aerState" , "aerfail");
|
|
|
|
err = xenbus_transaction_end(xbt, 0);
|
|
|
|
if (err) {
|
|
|
|
if (err == -EAGAIN)
|
|
|
|
goto again;
|
|
|
|
dev_err(&psdev->dev->dev,
|
|
|
|
"error %d when end xenbus transaction\n", err);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* For each aer recovery step error_detected, mmio_enabled, etc, front_end and
|
|
|
|
* backend need to have cooperation. In pciback, those steps will do similar
|
|
|
|
* jobs: send service request and waiting for front_end response.
|
|
|
|
*/
|
|
|
|
static pci_ers_result_t common_process(struct pcistub_device *psdev,
|
|
|
|
pci_channel_state_t state, int aer_cmd, pci_ers_result_t result)
|
|
|
|
{
|
|
|
|
pci_ers_result_t res = result;
|
|
|
|
struct xen_pcie_aer_op *aer_op;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/*with PV AER drivers*/
|
|
|
|
aer_op = &(psdev->pdev->sh_info->aer_op);
|
|
|
|
aer_op->cmd = aer_cmd ;
|
|
|
|
/*useful for error_detected callback*/
|
|
|
|
aer_op->err = state;
|
|
|
|
/*pcifront_end BDF*/
|
|
|
|
ret = pciback_get_pcifront_dev(psdev->dev, psdev->pdev,
|
|
|
|
&aer_op->domain, &aer_op->bus, &aer_op->devfn);
|
|
|
|
if (!ret) {
|
|
|
|
dev_err(&psdev->dev->dev,
|
|
|
|
"pciback: failed to get pcifront device\n");
|
|
|
|
return PCI_ERS_RESULT_NONE;
|
|
|
|
}
|
|
|
|
wmb();
|
|
|
|
|
|
|
|
dev_dbg(&psdev->dev->dev,
|
|
|
|
"pciback: aer_op %x dom %x bus %x devfn %x\n",
|
|
|
|
aer_cmd, aer_op->domain, aer_op->bus, aer_op->devfn);
|
|
|
|
/*local flag to mark there's aer request, pciback callback will use this
|
|
|
|
* flag to judge whether we need to check pci-front give aer service
|
|
|
|
* ack signal
|
|
|
|
*/
|
|
|
|
set_bit(_PCIB_op_pending, (unsigned long *)&psdev->pdev->flags);
|
|
|
|
|
|
|
|
/*It is possible that a pcifront conf_read_write ops request invokes
|
|
|
|
* the callback which cause the spurious execution of wake_up.
|
|
|
|
* Yet it is harmless and better than a spinlock here
|
|
|
|
*/
|
|
|
|
set_bit(_XEN_PCIB_active,
|
|
|
|
(unsigned long *)&psdev->pdev->sh_info->flags);
|
|
|
|
wmb();
|
|
|
|
notify_remote_via_irq(psdev->pdev->evtchn_irq);
|
|
|
|
|
|
|
|
ret = wait_event_timeout(aer_wait_queue, !(test_bit(_XEN_PCIB_active,
|
|
|
|
(unsigned long *)&psdev->pdev->sh_info->flags)), 300*HZ);
|
|
|
|
|
|
|
|
if (!ret) {
|
|
|
|
if (test_bit(_XEN_PCIB_active,
|
|
|
|
(unsigned long *)&psdev->pdev->sh_info->flags)) {
|
|
|
|
dev_err(&psdev->dev->dev,
|
|
|
|
"pcifront aer process not responding!\n");
|
|
|
|
clear_bit(_XEN_PCIB_active,
|
|
|
|
(unsigned long *)&psdev->pdev->sh_info->flags);
|
|
|
|
aer_op->err = PCI_ERS_RESULT_NONE;
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
clear_bit(_PCIB_op_pending, (unsigned long *)&psdev->pdev->flags);
|
|
|
|
|
|
|
|
if (test_bit(_XEN_PCIF_active,
|
|
|
|
(unsigned long *)&psdev->pdev->sh_info->flags)) {
|
|
|
|
dev_dbg(&psdev->dev->dev,
|
2011-07-20 00:09:43 +00:00
|
|
|
"schedule pci_conf service in pciback\n");
|
xen/pciback: xen pci backend driver.
This is the host side counterpart to the frontend driver in
drivers/pci/xen-pcifront.c. The PV protocol is also implemented by
frontend drivers in other OSes too, such as the BSDs.
The PV protocol is rather simple. There is page shared with the guest,
which has the 'struct xen_pci_sharedinfo' embossed in it. The backend
has a thread that is kicked every-time the structure is changed and
based on the operation field it performs specific tasks:
XEN_PCI_OP_conf_[read|write]:
Read/Write 0xCF8/0xCFC filtered data. (conf_space*.c)
Based on which field is probed, we either enable/disable the PCI
device, change power state, read VPD, etc. The major goal of this
call is to provide a Physical IRQ (PIRQ) to the guest.
The PIRQ is Xen hypervisor global IRQ value irrespective of the IRQ
is tied in to the IO-APIC, or is a vector. For GSI type
interrupts, the PIRQ==GSI holds. For MSI/MSI-X the
PIRQ value != Linux IRQ number (thought PIRQ==vector).
Please note, that with Xen, all interrupts (except those level shared ones)
are injected directly to the guest - there is no host interaction.
XEN_PCI_OP_[enable|disable]_msi[|x] (pciback_ops.c)
Enables/disables the MSI/MSI-X capability of the device. These operations
setup the MSI/MSI-X vectors for the guest and pass them to the frontend.
When the device is activated, the interrupts are directly injected in the
guest without involving the host.
XEN_PCI_OP_aer_[detected|resume|mmio|slotreset]: In case of failure,
perform the appropriate AER commands on the guest. Right now that is
a cop-out - we just kill the guest.
Besides implementing those commands, it can also
- hide a PCI device from the host. When booting up, the user can specify
xen-pciback.hide=(1:0:0)(BDF..) so that host does not try to use the
device.
The driver was lifted from linux-2.6.18.hg tree and fixed up
so that it could compile under v3.0. Per suggestion from Jesse Barnes
moved the driver to drivers/xen/xen-pciback.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-10-13 21:22:20 +00:00
|
|
|
test_and_schedule_op(psdev->pdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
res = (pci_ers_result_t)aer_op->err;
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* pciback_slot_reset: it will send the slot_reset request to pcifront in case
|
|
|
|
* of the device driver could provide this service, and then wait for pcifront
|
|
|
|
* ack.
|
|
|
|
* @dev: pointer to PCI devices
|
|
|
|
* return value is used by aer_core do_recovery policy
|
|
|
|
*/
|
|
|
|
static pci_ers_result_t pciback_slot_reset(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
struct pcistub_device *psdev;
|
|
|
|
pci_ers_result_t result;
|
|
|
|
|
|
|
|
result = PCI_ERS_RESULT_RECOVERED;
|
|
|
|
dev_dbg(&dev->dev, "pciback_slot_reset(bus:%x,devfn:%x)\n",
|
|
|
|
dev->bus->number, dev->devfn);
|
|
|
|
|
|
|
|
down_write(&pcistub_sem);
|
|
|
|
psdev = pcistub_device_find(pci_domain_nr(dev->bus),
|
|
|
|
dev->bus->number,
|
|
|
|
PCI_SLOT(dev->devfn),
|
|
|
|
PCI_FUNC(dev->devfn));
|
|
|
|
|
|
|
|
if (!psdev || !psdev->pdev) {
|
|
|
|
dev_err(&dev->dev,
|
|
|
|
"pciback device is not found/assigned\n");
|
|
|
|
goto end;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!psdev->pdev->sh_info) {
|
|
|
|
dev_err(&dev->dev, "pciback device is not connected or owned"
|
|
|
|
" by HVM, kill it\n");
|
|
|
|
kill_domain_by_device(psdev);
|
|
|
|
goto release;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!test_bit(_XEN_PCIB_AERHANDLER,
|
|
|
|
(unsigned long *)&psdev->pdev->sh_info->flags)) {
|
|
|
|
dev_err(&dev->dev,
|
|
|
|
"guest with no AER driver should have been killed\n");
|
|
|
|
goto release;
|
|
|
|
}
|
|
|
|
result = common_process(psdev, 1, XEN_PCI_OP_aer_slotreset, result);
|
|
|
|
|
|
|
|
if (result == PCI_ERS_RESULT_NONE ||
|
|
|
|
result == PCI_ERS_RESULT_DISCONNECT) {
|
|
|
|
dev_dbg(&dev->dev,
|
|
|
|
"No AER slot_reset service or disconnected!\n");
|
|
|
|
kill_domain_by_device(psdev);
|
|
|
|
}
|
|
|
|
release:
|
|
|
|
pcistub_device_put(psdev);
|
|
|
|
end:
|
|
|
|
up_write(&pcistub_sem);
|
|
|
|
return result;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*pciback_mmio_enabled: it will send the mmio_enabled request to pcifront
|
|
|
|
* in case of the device driver could provide this service, and then wait
|
|
|
|
* for pcifront ack
|
|
|
|
* @dev: pointer to PCI devices
|
|
|
|
* return value is used by aer_core do_recovery policy
|
|
|
|
*/
|
|
|
|
|
|
|
|
static pci_ers_result_t pciback_mmio_enabled(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
struct pcistub_device *psdev;
|
|
|
|
pci_ers_result_t result;
|
|
|
|
|
|
|
|
result = PCI_ERS_RESULT_RECOVERED;
|
|
|
|
dev_dbg(&dev->dev, "pciback_mmio_enabled(bus:%x,devfn:%x)\n",
|
|
|
|
dev->bus->number, dev->devfn);
|
|
|
|
|
|
|
|
down_write(&pcistub_sem);
|
|
|
|
psdev = pcistub_device_find(pci_domain_nr(dev->bus),
|
|
|
|
dev->bus->number,
|
|
|
|
PCI_SLOT(dev->devfn),
|
|
|
|
PCI_FUNC(dev->devfn));
|
|
|
|
|
|
|
|
if (!psdev || !psdev->pdev) {
|
|
|
|
dev_err(&dev->dev,
|
|
|
|
"pciback device is not found/assigned\n");
|
|
|
|
goto end;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!psdev->pdev->sh_info) {
|
|
|
|
dev_err(&dev->dev, "pciback device is not connected or owned"
|
|
|
|
" by HVM, kill it\n");
|
|
|
|
kill_domain_by_device(psdev);
|
|
|
|
goto release;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!test_bit(_XEN_PCIB_AERHANDLER,
|
|
|
|
(unsigned long *)&psdev->pdev->sh_info->flags)) {
|
|
|
|
dev_err(&dev->dev,
|
|
|
|
"guest with no AER driver should have been killed\n");
|
|
|
|
goto release;
|
|
|
|
}
|
|
|
|
result = common_process(psdev, 1, XEN_PCI_OP_aer_mmio, result);
|
|
|
|
|
|
|
|
if (result == PCI_ERS_RESULT_NONE ||
|
|
|
|
result == PCI_ERS_RESULT_DISCONNECT) {
|
|
|
|
dev_dbg(&dev->dev,
|
|
|
|
"No AER mmio_enabled service or disconnected!\n");
|
|
|
|
kill_domain_by_device(psdev);
|
|
|
|
}
|
|
|
|
release:
|
|
|
|
pcistub_device_put(psdev);
|
|
|
|
end:
|
|
|
|
up_write(&pcistub_sem);
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*pciback_error_detected: it will send the error_detected request to pcifront
|
|
|
|
* in case of the device driver could provide this service, and then wait
|
|
|
|
* for pcifront ack.
|
|
|
|
* @dev: pointer to PCI devices
|
|
|
|
* @error: the current PCI connection state
|
|
|
|
* return value is used by aer_core do_recovery policy
|
|
|
|
*/
|
|
|
|
|
|
|
|
static pci_ers_result_t pciback_error_detected(struct pci_dev *dev,
|
|
|
|
pci_channel_state_t error)
|
|
|
|
{
|
|
|
|
struct pcistub_device *psdev;
|
|
|
|
pci_ers_result_t result;
|
|
|
|
|
|
|
|
result = PCI_ERS_RESULT_CAN_RECOVER;
|
|
|
|
dev_dbg(&dev->dev, "pciback_error_detected(bus:%x,devfn:%x)\n",
|
|
|
|
dev->bus->number, dev->devfn);
|
|
|
|
|
|
|
|
down_write(&pcistub_sem);
|
|
|
|
psdev = pcistub_device_find(pci_domain_nr(dev->bus),
|
|
|
|
dev->bus->number,
|
|
|
|
PCI_SLOT(dev->devfn),
|
|
|
|
PCI_FUNC(dev->devfn));
|
|
|
|
|
|
|
|
if (!psdev || !psdev->pdev) {
|
|
|
|
dev_err(&dev->dev,
|
|
|
|
"pciback device is not found/assigned\n");
|
|
|
|
goto end;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!psdev->pdev->sh_info) {
|
|
|
|
dev_err(&dev->dev, "pciback device is not connected or owned"
|
|
|
|
" by HVM, kill it\n");
|
|
|
|
kill_domain_by_device(psdev);
|
|
|
|
goto release;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*Guest owns the device yet no aer handler regiested, kill guest*/
|
|
|
|
if (!test_bit(_XEN_PCIB_AERHANDLER,
|
|
|
|
(unsigned long *)&psdev->pdev->sh_info->flags)) {
|
|
|
|
dev_dbg(&dev->dev, "guest may have no aer driver, kill it\n");
|
|
|
|
kill_domain_by_device(psdev);
|
|
|
|
goto release;
|
|
|
|
}
|
|
|
|
result = common_process(psdev, error, XEN_PCI_OP_aer_detected, result);
|
|
|
|
|
|
|
|
if (result == PCI_ERS_RESULT_NONE ||
|
|
|
|
result == PCI_ERS_RESULT_DISCONNECT) {
|
|
|
|
dev_dbg(&dev->dev,
|
|
|
|
"No AER error_detected service or disconnected!\n");
|
|
|
|
kill_domain_by_device(psdev);
|
|
|
|
}
|
|
|
|
release:
|
|
|
|
pcistub_device_put(psdev);
|
|
|
|
end:
|
|
|
|
up_write(&pcistub_sem);
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*pciback_error_resume: it will send the error_resume request to pcifront
|
|
|
|
* in case of the device driver could provide this service, and then wait
|
|
|
|
* for pcifront ack.
|
|
|
|
* @dev: pointer to PCI devices
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void pciback_error_resume(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
struct pcistub_device *psdev;
|
|
|
|
|
|
|
|
dev_dbg(&dev->dev, "pciback_error_resume(bus:%x,devfn:%x)\n",
|
|
|
|
dev->bus->number, dev->devfn);
|
|
|
|
|
|
|
|
down_write(&pcistub_sem);
|
|
|
|
psdev = pcistub_device_find(pci_domain_nr(dev->bus),
|
|
|
|
dev->bus->number,
|
|
|
|
PCI_SLOT(dev->devfn),
|
|
|
|
PCI_FUNC(dev->devfn));
|
|
|
|
|
|
|
|
if (!psdev || !psdev->pdev) {
|
|
|
|
dev_err(&dev->dev,
|
|
|
|
"pciback device is not found/assigned\n");
|
|
|
|
goto end;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!psdev->pdev->sh_info) {
|
|
|
|
dev_err(&dev->dev, "pciback device is not connected or owned"
|
|
|
|
" by HVM, kill it\n");
|
|
|
|
kill_domain_by_device(psdev);
|
|
|
|
goto release;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!test_bit(_XEN_PCIB_AERHANDLER,
|
|
|
|
(unsigned long *)&psdev->pdev->sh_info->flags)) {
|
|
|
|
dev_err(&dev->dev,
|
|
|
|
"guest with no AER driver should have been killed\n");
|
|
|
|
kill_domain_by_device(psdev);
|
|
|
|
goto release;
|
|
|
|
}
|
|
|
|
common_process(psdev, 1, XEN_PCI_OP_aer_resume,
|
|
|
|
PCI_ERS_RESULT_RECOVERED);
|
|
|
|
release:
|
|
|
|
pcistub_device_put(psdev);
|
|
|
|
end:
|
|
|
|
up_write(&pcistub_sem);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*add pciback AER handling*/
|
|
|
|
static struct pci_error_handlers pciback_error_handler = {
|
|
|
|
.error_detected = pciback_error_detected,
|
|
|
|
.mmio_enabled = pciback_mmio_enabled,
|
|
|
|
.slot_reset = pciback_slot_reset,
|
|
|
|
.resume = pciback_error_resume,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Note: There is no MODULE_DEVICE_TABLE entry here because this isn't
|
|
|
|
* for a normal device. I don't want it to be loaded automatically.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static struct pci_driver pciback_pci_driver = {
|
|
|
|
.name = "pciback",
|
|
|
|
.id_table = pcistub_ids,
|
|
|
|
.probe = pcistub_probe,
|
|
|
|
.remove = pcistub_remove,
|
|
|
|
.err_handler = &pciback_error_handler,
|
|
|
|
};
|
|
|
|
|
|
|
|
static inline int str_to_slot(const char *buf, int *domain, int *bus,
|
|
|
|
int *slot, int *func)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = sscanf(buf, " %x:%x:%x.%x", domain, bus, slot, func);
|
|
|
|
if (err == 4)
|
|
|
|
return 0;
|
|
|
|
else if (err < 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* try again without domain */
|
|
|
|
*domain = 0;
|
|
|
|
err = sscanf(buf, " %x:%x.%x", bus, slot, func);
|
|
|
|
if (err == 3)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int str_to_quirk(const char *buf, int *domain, int *bus, int
|
|
|
|
*slot, int *func, int *reg, int *size, int *mask)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err =
|
|
|
|
sscanf(buf, " %04x:%02x:%02x.%1x-%08x:%1x:%08x", domain, bus, slot,
|
|
|
|
func, reg, size, mask);
|
|
|
|
if (err == 7)
|
|
|
|
return 0;
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pcistub_device_id_add(int domain, int bus, int slot, int func)
|
|
|
|
{
|
|
|
|
struct pcistub_device_id *pci_dev_id;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
pci_dev_id = kmalloc(sizeof(*pci_dev_id), GFP_KERNEL);
|
|
|
|
if (!pci_dev_id)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
pci_dev_id->domain = domain;
|
|
|
|
pci_dev_id->bus = bus;
|
|
|
|
pci_dev_id->devfn = PCI_DEVFN(slot, func);
|
|
|
|
|
|
|
|
pr_debug("pciback: wants to seize %04x:%02x:%02x.%01x\n",
|
|
|
|
domain, bus, slot, func);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&device_ids_lock, flags);
|
|
|
|
list_add_tail(&pci_dev_id->slot_list, &pcistub_device_ids);
|
|
|
|
spin_unlock_irqrestore(&device_ids_lock, flags);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pcistub_device_id_remove(int domain, int bus, int slot, int func)
|
|
|
|
{
|
|
|
|
struct pcistub_device_id *pci_dev_id, *t;
|
|
|
|
int devfn = PCI_DEVFN(slot, func);
|
|
|
|
int err = -ENOENT;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&device_ids_lock, flags);
|
|
|
|
list_for_each_entry_safe(pci_dev_id, t, &pcistub_device_ids,
|
|
|
|
slot_list) {
|
|
|
|
if (pci_dev_id->domain == domain
|
|
|
|
&& pci_dev_id->bus == bus && pci_dev_id->devfn == devfn) {
|
|
|
|
/* Don't break; here because it's possible the same
|
|
|
|
* slot could be in the list more than once
|
|
|
|
*/
|
|
|
|
list_del(&pci_dev_id->slot_list);
|
|
|
|
kfree(pci_dev_id);
|
|
|
|
|
|
|
|
err = 0;
|
|
|
|
|
|
|
|
pr_debug("pciback: removed %04x:%02x:%02x.%01x from "
|
|
|
|
"seize list\n", domain, bus, slot, func);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&device_ids_lock, flags);
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pcistub_reg_add(int domain, int bus, int slot, int func, int reg,
|
|
|
|
int size, int mask)
|
|
|
|
{
|
|
|
|
int err = 0;
|
|
|
|
struct pcistub_device *psdev;
|
|
|
|
struct pci_dev *dev;
|
|
|
|
struct config_field *field;
|
|
|
|
|
|
|
|
psdev = pcistub_device_find(domain, bus, slot, func);
|
|
|
|
if (!psdev || !psdev->dev) {
|
|
|
|
err = -ENODEV;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
dev = psdev->dev;
|
|
|
|
|
|
|
|
field = kzalloc(sizeof(*field), GFP_ATOMIC);
|
|
|
|
if (!field) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
field->offset = reg;
|
|
|
|
field->size = size;
|
|
|
|
field->mask = mask;
|
|
|
|
field->init = NULL;
|
|
|
|
field->reset = NULL;
|
|
|
|
field->release = NULL;
|
|
|
|
field->clean = pciback_config_field_free;
|
|
|
|
|
|
|
|
err = pciback_config_quirks_add_field(dev, field);
|
|
|
|
if (err)
|
|
|
|
kfree(field);
|
|
|
|
out:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcistub_slot_add(struct device_driver *drv, const char *buf,
|
|
|
|
size_t count)
|
|
|
|
{
|
|
|
|
int domain, bus, slot, func;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = str_to_slot(buf, &domain, &bus, &slot, &func);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
err = pcistub_device_id_add(domain, bus, slot, func);
|
|
|
|
|
|
|
|
out:
|
|
|
|
if (!err)
|
|
|
|
err = count;
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
DRIVER_ATTR(new_slot, S_IWUSR, NULL, pcistub_slot_add);
|
|
|
|
|
|
|
|
static ssize_t pcistub_slot_remove(struct device_driver *drv, const char *buf,
|
|
|
|
size_t count)
|
|
|
|
{
|
|
|
|
int domain, bus, slot, func;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = str_to_slot(buf, &domain, &bus, &slot, &func);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
err = pcistub_device_id_remove(domain, bus, slot, func);
|
|
|
|
|
|
|
|
out:
|
|
|
|
if (!err)
|
|
|
|
err = count;
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
DRIVER_ATTR(remove_slot, S_IWUSR, NULL, pcistub_slot_remove);
|
|
|
|
|
|
|
|
static ssize_t pcistub_slot_show(struct device_driver *drv, char *buf)
|
|
|
|
{
|
|
|
|
struct pcistub_device_id *pci_dev_id;
|
|
|
|
size_t count = 0;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&device_ids_lock, flags);
|
|
|
|
list_for_each_entry(pci_dev_id, &pcistub_device_ids, slot_list) {
|
|
|
|
if (count >= PAGE_SIZE)
|
|
|
|
break;
|
|
|
|
|
|
|
|
count += scnprintf(buf + count, PAGE_SIZE - count,
|
|
|
|
"%04x:%02x:%02x.%01x\n",
|
|
|
|
pci_dev_id->domain, pci_dev_id->bus,
|
|
|
|
PCI_SLOT(pci_dev_id->devfn),
|
|
|
|
PCI_FUNC(pci_dev_id->devfn));
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&device_ids_lock, flags);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
DRIVER_ATTR(slots, S_IRUSR, pcistub_slot_show, NULL);
|
|
|
|
|
|
|
|
static ssize_t pcistub_quirk_add(struct device_driver *drv, const char *buf,
|
|
|
|
size_t count)
|
|
|
|
{
|
|
|
|
int domain, bus, slot, func, reg, size, mask;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = str_to_quirk(buf, &domain, &bus, &slot, &func, ®, &size,
|
|
|
|
&mask);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
err = pcistub_reg_add(domain, bus, slot, func, reg, size, mask);
|
|
|
|
|
|
|
|
out:
|
|
|
|
if (!err)
|
|
|
|
err = count;
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcistub_quirk_show(struct device_driver *drv, char *buf)
|
|
|
|
{
|
|
|
|
int count = 0;
|
|
|
|
unsigned long flags;
|
|
|
|
struct pciback_config_quirk *quirk;
|
|
|
|
struct pciback_dev_data *dev_data;
|
|
|
|
const struct config_field *field;
|
|
|
|
const struct config_field_entry *cfg_entry;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&device_ids_lock, flags);
|
|
|
|
list_for_each_entry(quirk, &pciback_quirks, quirks_list) {
|
|
|
|
if (count >= PAGE_SIZE)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
count += scnprintf(buf + count, PAGE_SIZE - count,
|
|
|
|
"%02x:%02x.%01x\n\t%04x:%04x:%04x:%04x\n",
|
|
|
|
quirk->pdev->bus->number,
|
|
|
|
PCI_SLOT(quirk->pdev->devfn),
|
|
|
|
PCI_FUNC(quirk->pdev->devfn),
|
|
|
|
quirk->devid.vendor, quirk->devid.device,
|
|
|
|
quirk->devid.subvendor,
|
|
|
|
quirk->devid.subdevice);
|
|
|
|
|
|
|
|
dev_data = pci_get_drvdata(quirk->pdev);
|
|
|
|
|
|
|
|
list_for_each_entry(cfg_entry, &dev_data->config_fields, list) {
|
|
|
|
field = cfg_entry->field;
|
|
|
|
if (count >= PAGE_SIZE)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
count += scnprintf(buf + count, PAGE_SIZE - count,
|
|
|
|
"\t\t%08x:%01x:%08x\n",
|
|
|
|
cfg_entry->base_offset +
|
|
|
|
field->offset, field->size,
|
|
|
|
field->mask);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
spin_unlock_irqrestore(&device_ids_lock, flags);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
DRIVER_ATTR(quirks, S_IRUSR | S_IWUSR, pcistub_quirk_show, pcistub_quirk_add);
|
|
|
|
|
|
|
|
static ssize_t permissive_add(struct device_driver *drv, const char *buf,
|
|
|
|
size_t count)
|
|
|
|
{
|
|
|
|
int domain, bus, slot, func;
|
|
|
|
int err;
|
|
|
|
struct pcistub_device *psdev;
|
|
|
|
struct pciback_dev_data *dev_data;
|
|
|
|
err = str_to_slot(buf, &domain, &bus, &slot, &func);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
psdev = pcistub_device_find(domain, bus, slot, func);
|
|
|
|
if (!psdev) {
|
|
|
|
err = -ENODEV;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
if (!psdev->dev) {
|
|
|
|
err = -ENODEV;
|
|
|
|
goto release;
|
|
|
|
}
|
|
|
|
dev_data = pci_get_drvdata(psdev->dev);
|
|
|
|
/* the driver data for a device should never be null at this point */
|
|
|
|
if (!dev_data) {
|
|
|
|
err = -ENXIO;
|
|
|
|
goto release;
|
|
|
|
}
|
|
|
|
if (!dev_data->permissive) {
|
|
|
|
dev_data->permissive = 1;
|
|
|
|
/* Let user know that what they're doing could be unsafe */
|
|
|
|
dev_warn(&psdev->dev->dev, "enabling permissive mode "
|
|
|
|
"configuration space accesses!\n");
|
|
|
|
dev_warn(&psdev->dev->dev,
|
|
|
|
"permissive mode is potentially unsafe!\n");
|
|
|
|
}
|
|
|
|
release:
|
|
|
|
pcistub_device_put(psdev);
|
|
|
|
out:
|
|
|
|
if (!err)
|
|
|
|
err = count;
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t permissive_show(struct device_driver *drv, char *buf)
|
|
|
|
{
|
|
|
|
struct pcistub_device *psdev;
|
|
|
|
struct pciback_dev_data *dev_data;
|
|
|
|
size_t count = 0;
|
|
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pcistub_devices_lock, flags);
|
|
|
|
list_for_each_entry(psdev, &pcistub_devices, dev_list) {
|
|
|
|
if (count >= PAGE_SIZE)
|
|
|
|
break;
|
|
|
|
if (!psdev->dev)
|
|
|
|
continue;
|
|
|
|
dev_data = pci_get_drvdata(psdev->dev);
|
|
|
|
if (!dev_data || !dev_data->permissive)
|
|
|
|
continue;
|
|
|
|
count +=
|
|
|
|
scnprintf(buf + count, PAGE_SIZE - count, "%s\n",
|
|
|
|
pci_name(psdev->dev));
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&pcistub_devices_lock, flags);
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
DRIVER_ATTR(permissive, S_IRUSR | S_IWUSR, permissive_show, permissive_add);
|
|
|
|
|
|
|
|
static void pcistub_exit(void)
|
|
|
|
{
|
|
|
|
driver_remove_file(&pciback_pci_driver.driver, &driver_attr_new_slot);
|
|
|
|
driver_remove_file(&pciback_pci_driver.driver,
|
|
|
|
&driver_attr_remove_slot);
|
|
|
|
driver_remove_file(&pciback_pci_driver.driver, &driver_attr_slots);
|
|
|
|
driver_remove_file(&pciback_pci_driver.driver, &driver_attr_quirks);
|
|
|
|
driver_remove_file(&pciback_pci_driver.driver, &driver_attr_permissive);
|
|
|
|
|
|
|
|
pci_unregister_driver(&pciback_pci_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init pcistub_init(void)
|
|
|
|
{
|
|
|
|
int pos = 0;
|
|
|
|
int err = 0;
|
|
|
|
int domain, bus, slot, func;
|
|
|
|
int parsed;
|
|
|
|
|
|
|
|
if (pci_devs_to_hide && *pci_devs_to_hide) {
|
|
|
|
do {
|
|
|
|
parsed = 0;
|
|
|
|
|
|
|
|
err = sscanf(pci_devs_to_hide + pos,
|
|
|
|
" (%x:%x:%x.%x) %n",
|
|
|
|
&domain, &bus, &slot, &func, &parsed);
|
|
|
|
if (err != 4) {
|
|
|
|
domain = 0;
|
|
|
|
err = sscanf(pci_devs_to_hide + pos,
|
|
|
|
" (%x:%x.%x) %n",
|
|
|
|
&bus, &slot, &func, &parsed);
|
|
|
|
if (err != 3)
|
|
|
|
goto parse_error;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = pcistub_device_id_add(domain, bus, slot, func);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* if parsed<=0, we've reached the end of the string */
|
|
|
|
pos += parsed;
|
|
|
|
} while (parsed > 0 && pci_devs_to_hide[pos]);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* If we're the first PCI Device Driver to register, we're the
|
|
|
|
* first one to get offered PCI devices as they become
|
|
|
|
* available (and thus we can be the first to grab them)
|
|
|
|
*/
|
|
|
|
err = pci_register_driver(&pciback_pci_driver);
|
|
|
|
if (err < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
err = driver_create_file(&pciback_pci_driver.driver,
|
|
|
|
&driver_attr_new_slot);
|
|
|
|
if (!err)
|
|
|
|
err = driver_create_file(&pciback_pci_driver.driver,
|
|
|
|
&driver_attr_remove_slot);
|
|
|
|
if (!err)
|
|
|
|
err = driver_create_file(&pciback_pci_driver.driver,
|
|
|
|
&driver_attr_slots);
|
|
|
|
if (!err)
|
|
|
|
err = driver_create_file(&pciback_pci_driver.driver,
|
|
|
|
&driver_attr_quirks);
|
|
|
|
if (!err)
|
|
|
|
err = driver_create_file(&pciback_pci_driver.driver,
|
|
|
|
&driver_attr_permissive);
|
|
|
|
|
|
|
|
if (err)
|
|
|
|
pcistub_exit();
|
|
|
|
|
|
|
|
out:
|
|
|
|
return err;
|
|
|
|
|
|
|
|
parse_error:
|
|
|
|
printk(KERN_ERR "pciback: Error parsing pci_devs_to_hide at \"%s\"\n",
|
|
|
|
pci_devs_to_hide + pos);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifndef MODULE
|
|
|
|
/*
|
|
|
|
* fs_initcall happens before device_initcall
|
|
|
|
* so pciback *should* get called first (b/c we
|
|
|
|
* want to suck up any device before other drivers
|
|
|
|
* get a chance by being the first pci device
|
|
|
|
* driver to register)
|
|
|
|
*/
|
|
|
|
fs_initcall(pcistub_init);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static int __init pciback_init(void)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (!xen_initial_domain())
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
err = pciback_config_init();
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
#ifdef MODULE
|
|
|
|
err = pcistub_init();
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
pcistub_init_devices_late();
|
|
|
|
err = pciback_xenbus_register();
|
|
|
|
if (err)
|
|
|
|
pcistub_exit();
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit pciback_cleanup(void)
|
|
|
|
{
|
|
|
|
pciback_xenbus_unregister();
|
|
|
|
pcistub_exit();
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(pciback_init);
|
|
|
|
module_exit(pciback_cleanup);
|
|
|
|
|
|
|
|
MODULE_LICENSE("Dual BSD/GPL");
|