linux/arch/x86_64/kernel/vmlinux.lds.S

229 lines
5.9 KiB
ArmAsm
Raw Normal View History

/* ld script to make x86-64 Linux kernel
* Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
*/
#define LOAD_OFFSET __START_KERNEL_map
#include <asm-generic/vmlinux.lds.h>
#include <asm/page.h>
#undef i386 /* in case the preprocessor is a 32bit one */
OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
OUTPUT_ARCH(i386:x86-64)
ENTRY(phys_startup_64)
jiffies_64 = jiffies;
_proxy_pda = 1;
[PATCH] Put .note.* sections into a PT_NOTE segment This patch updates x86_64 linker script to pack any .note.* sections into a PT_NOTE segment in the output file. To do this, we tell ld that we need a PT_NOTE segment. This requires us to start explicitly mapping sections to segments, so we also need to explicitly create PT_LOAD segments for text and data, and map the sections to them appropriately. Fortunately, each section will default to its previous section's segment, so it doesn't take many changes to vmlinux.lds.S. The corresponding change is already made for i386 in -mm and I'd like this patch to join it. The section to segment mappings do change as do the segment flags so some time in -mm would be good for that reason as well, just in case. In particular .data and .bss move from the text segment to the data segment and .data.cacheline_aligned .data.read_mostly are put in the data segment instead of a separate one. I think that it would be possible to exactly match the existing section to segment mapping and flags but it would be a more intrusive change and I'm not sure there is a reason for the existing layout other than it is what you get by default if you don't explicitly specify something else. If there is a reason for the existing layout then I will of course make the more intrusive change. If there is no reason we could probably drop the executable or writable flags from some segments but I don't know how much attention is paid to them anyway so it might not be worth the effort. The vsyscall related sections need to go in a different segment to the normal data segment and so I invented a "user" segment to contain them. I believe this should appear to be another data segment as far as the kernel is concerned so the flags are setup accordingly. The notes will be used in the Xen paravirt_ops backend to provide additional information to the domain builder. I am in the process of converting the xen-unstable kernels and tools over to this scheme at the moment to support this in the future. It has been suggested to me that the notes segment should have flags 0 (i.e. not readable) since it is only used by the loader and is not used at runtime. For now I went with a readable segment since that is what the i386 patch uses. AK: dropped NOTES addition right now because the needed infrastructure for that is not merged yet Signed-off-by: Ian Campbell <ian.campbell@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:38 +00:00
PHDRS {
text PT_LOAD FLAGS(5); /* R_E */
data PT_LOAD FLAGS(7); /* RWE */
user PT_LOAD FLAGS(7); /* RWE */
data.init PT_LOAD FLAGS(7); /* RWE */
[PATCH] Put .note.* sections into a PT_NOTE segment This patch updates x86_64 linker script to pack any .note.* sections into a PT_NOTE segment in the output file. To do this, we tell ld that we need a PT_NOTE segment. This requires us to start explicitly mapping sections to segments, so we also need to explicitly create PT_LOAD segments for text and data, and map the sections to them appropriately. Fortunately, each section will default to its previous section's segment, so it doesn't take many changes to vmlinux.lds.S. The corresponding change is already made for i386 in -mm and I'd like this patch to join it. The section to segment mappings do change as do the segment flags so some time in -mm would be good for that reason as well, just in case. In particular .data and .bss move from the text segment to the data segment and .data.cacheline_aligned .data.read_mostly are put in the data segment instead of a separate one. I think that it would be possible to exactly match the existing section to segment mapping and flags but it would be a more intrusive change and I'm not sure there is a reason for the existing layout other than it is what you get by default if you don't explicitly specify something else. If there is a reason for the existing layout then I will of course make the more intrusive change. If there is no reason we could probably drop the executable or writable flags from some segments but I don't know how much attention is paid to them anyway so it might not be worth the effort. The vsyscall related sections need to go in a different segment to the normal data segment and so I invented a "user" segment to contain them. I believe this should appear to be another data segment as far as the kernel is concerned so the flags are setup accordingly. The notes will be used in the Xen paravirt_ops backend to provide additional information to the domain builder. I am in the process of converting the xen-unstable kernels and tools over to this scheme at the moment to support this in the future. It has been suggested to me that the notes segment should have flags 0 (i.e. not readable) since it is only used by the loader and is not used at runtime. For now I went with a readable segment since that is what the i386 patch uses. AK: dropped NOTES addition right now because the needed infrastructure for that is not merged yet Signed-off-by: Ian Campbell <ian.campbell@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:38 +00:00
note PT_NOTE FLAGS(4); /* R__ */
}
SECTIONS
{
. = __START_KERNEL;
phys_startup_64 = startup_64 - LOAD_OFFSET;
_text = .; /* Text and read-only data */
.text : AT(ADDR(.text) - LOAD_OFFSET) {
2006-03-25 15:30:49 +00:00
/* First the code that has to be first for bootstrapping */
*(.bootstrap.text)
_stext = .;
2006-03-25 15:30:49 +00:00
/* Then the rest */
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
*(.fixup)
*(.gnu.warning)
[PATCH] Put .note.* sections into a PT_NOTE segment This patch updates x86_64 linker script to pack any .note.* sections into a PT_NOTE segment in the output file. To do this, we tell ld that we need a PT_NOTE segment. This requires us to start explicitly mapping sections to segments, so we also need to explicitly create PT_LOAD segments for text and data, and map the sections to them appropriately. Fortunately, each section will default to its previous section's segment, so it doesn't take many changes to vmlinux.lds.S. The corresponding change is already made for i386 in -mm and I'd like this patch to join it. The section to segment mappings do change as do the segment flags so some time in -mm would be good for that reason as well, just in case. In particular .data and .bss move from the text segment to the data segment and .data.cacheline_aligned .data.read_mostly are put in the data segment instead of a separate one. I think that it would be possible to exactly match the existing section to segment mapping and flags but it would be a more intrusive change and I'm not sure there is a reason for the existing layout other than it is what you get by default if you don't explicitly specify something else. If there is a reason for the existing layout then I will of course make the more intrusive change. If there is no reason we could probably drop the executable or writable flags from some segments but I don't know how much attention is paid to them anyway so it might not be worth the effort. The vsyscall related sections need to go in a different segment to the normal data segment and so I invented a "user" segment to contain them. I believe this should appear to be another data segment as far as the kernel is concerned so the flags are setup accordingly. The notes will be used in the Xen paravirt_ops backend to provide additional information to the domain builder. I am in the process of converting the xen-unstable kernels and tools over to this scheme at the moment to support this in the future. It has been suggested to me that the notes segment should have flags 0 (i.e. not readable) since it is only used by the loader and is not used at runtime. For now I went with a readable segment since that is what the i386 patch uses. AK: dropped NOTES addition right now because the needed infrastructure for that is not merged yet Signed-off-by: Ian Campbell <ian.campbell@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:38 +00:00
} :text = 0x9090
/* out-of-line lock text */
.text.lock : AT(ADDR(.text.lock) - LOAD_OFFSET) { *(.text.lock) }
_etext = .; /* End of text section */
. = ALIGN(16); /* Exception table */
__start___ex_table = .;
__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { *(__ex_table) }
__stop___ex_table = .;
BUG_TABLE
RODATA
. = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */
/* Data */
.data : AT(ADDR(.data) - LOAD_OFFSET) {
DATA_DATA
CONSTRUCTORS
[PATCH] Put .note.* sections into a PT_NOTE segment This patch updates x86_64 linker script to pack any .note.* sections into a PT_NOTE segment in the output file. To do this, we tell ld that we need a PT_NOTE segment. This requires us to start explicitly mapping sections to segments, so we also need to explicitly create PT_LOAD segments for text and data, and map the sections to them appropriately. Fortunately, each section will default to its previous section's segment, so it doesn't take many changes to vmlinux.lds.S. The corresponding change is already made for i386 in -mm and I'd like this patch to join it. The section to segment mappings do change as do the segment flags so some time in -mm would be good for that reason as well, just in case. In particular .data and .bss move from the text segment to the data segment and .data.cacheline_aligned .data.read_mostly are put in the data segment instead of a separate one. I think that it would be possible to exactly match the existing section to segment mapping and flags but it would be a more intrusive change and I'm not sure there is a reason for the existing layout other than it is what you get by default if you don't explicitly specify something else. If there is a reason for the existing layout then I will of course make the more intrusive change. If there is no reason we could probably drop the executable or writable flags from some segments but I don't know how much attention is paid to them anyway so it might not be worth the effort. The vsyscall related sections need to go in a different segment to the normal data segment and so I invented a "user" segment to contain them. I believe this should appear to be another data segment as far as the kernel is concerned so the flags are setup accordingly. The notes will be used in the Xen paravirt_ops backend to provide additional information to the domain builder. I am in the process of converting the xen-unstable kernels and tools over to this scheme at the moment to support this in the future. It has been suggested to me that the notes segment should have flags 0 (i.e. not readable) since it is only used by the loader and is not used at runtime. For now I went with a readable segment since that is what the i386 patch uses. AK: dropped NOTES addition right now because the needed infrastructure for that is not merged yet Signed-off-by: Ian Campbell <ian.campbell@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:38 +00:00
} :data
_edata = .; /* End of data section */
. = ALIGN(PAGE_SIZE);
. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
*(.data.cacheline_aligned)
}
. = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
*(.data.read_mostly)
}
#define VSYSCALL_ADDR (-10*1024*1024)
#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095))
#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095))
#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
. = VSYSCALL_ADDR;
[PATCH] Put .note.* sections into a PT_NOTE segment This patch updates x86_64 linker script to pack any .note.* sections into a PT_NOTE segment in the output file. To do this, we tell ld that we need a PT_NOTE segment. This requires us to start explicitly mapping sections to segments, so we also need to explicitly create PT_LOAD segments for text and data, and map the sections to them appropriately. Fortunately, each section will default to its previous section's segment, so it doesn't take many changes to vmlinux.lds.S. The corresponding change is already made for i386 in -mm and I'd like this patch to join it. The section to segment mappings do change as do the segment flags so some time in -mm would be good for that reason as well, just in case. In particular .data and .bss move from the text segment to the data segment and .data.cacheline_aligned .data.read_mostly are put in the data segment instead of a separate one. I think that it would be possible to exactly match the existing section to segment mapping and flags but it would be a more intrusive change and I'm not sure there is a reason for the existing layout other than it is what you get by default if you don't explicitly specify something else. If there is a reason for the existing layout then I will of course make the more intrusive change. If there is no reason we could probably drop the executable or writable flags from some segments but I don't know how much attention is paid to them anyway so it might not be worth the effort. The vsyscall related sections need to go in a different segment to the normal data segment and so I invented a "user" segment to contain them. I believe this should appear to be another data segment as far as the kernel is concerned so the flags are setup accordingly. The notes will be used in the Xen paravirt_ops backend to provide additional information to the domain builder. I am in the process of converting the xen-unstable kernels and tools over to this scheme at the moment to support this in the future. It has been suggested to me that the notes segment should have flags 0 (i.e. not readable) since it is only used by the loader and is not used at runtime. For now I went with a readable segment since that is what the i386 patch uses. AK: dropped NOTES addition right now because the needed infrastructure for that is not merged yet Signed-off-by: Ian Campbell <ian.campbell@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:38 +00:00
.vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } :user
__vsyscall_0 = VSYSCALL_VIRT_ADDR;
. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
.vsyscall_fn : AT(VLOAD(.vsyscall_fn)) { *(.vsyscall_fn) }
. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
.vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data))
{ *(.vsyscall_gtod_data) }
vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data);
.vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1))
{ *(.vsyscall_1) }
.vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2))
{ *(.vsyscall_2) }
.vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) }
vgetcpu_mode = VVIRT(.vgetcpu_mode);
. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
.jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) }
jiffies = VVIRT(.jiffies);
.vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3))
{ *(.vsyscall_3) }
. = VSYSCALL_VIRT_ADDR + 4096;
#undef VSYSCALL_ADDR
#undef VSYSCALL_PHYS_ADDR
#undef VSYSCALL_VIRT_ADDR
#undef VLOAD_OFFSET
#undef VLOAD
#undef VVIRT_OFFSET
#undef VVIRT
. = ALIGN(8192); /* init_task */
.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
*(.data.init_task)
}:data.init
. = ALIGN(4096);
.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
*(.data.page_aligned)
}
/* might get freed after init */
. = ALIGN(4096);
__smp_alt_begin = .;
__smp_alt_instructions = .;
.smp_altinstructions : AT(ADDR(.smp_altinstructions) - LOAD_OFFSET) {
*(.smp_altinstructions)
}
__smp_alt_instructions_end = .;
. = ALIGN(8);
__smp_locks = .;
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
*(.smp_locks)
}
__smp_locks_end = .;
.smp_altinstr_replacement : AT(ADDR(.smp_altinstr_replacement) - LOAD_OFFSET) {
*(.smp_altinstr_replacement)
}
. = ALIGN(4096);
__smp_alt_end = .;
. = ALIGN(4096); /* Init code and data */
__init_begin = .;
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
_sinittext = .;
*(.init.text)
_einittext = .;
}
__initdata_begin = .;
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { *(.init.data) }
__initdata_end = .;
. = ALIGN(16);
__setup_start = .;
.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { *(.init.setup) }
__setup_end = .;
__initcall_start = .;
.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
INITCALLS
}
__initcall_end = .;
__con_initcall_start = .;
.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
*(.con_initcall.init)
}
__con_initcall_end = .;
SECURITY_INIT
. = ALIGN(8);
__alt_instructions = .;
.altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
*(.altinstructions)
}
__alt_instructions_end = .;
.altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
*(.altinstr_replacement)
}
/* .exit.text is discard at runtime, not link time, to deal with references
from .altinstructions and .eh_frame */
.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) }
.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) }
#ifdef CONFIG_BLK_DEV_INITRD
. = ALIGN(4096);
__initramfs_start = .;
.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) }
__initramfs_end = .;
#endif
. = ALIGN(4096);
__per_cpu_start = .;
.data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { *(.data.percpu) }
__per_cpu_end = .;
. = ALIGN(4096);
__init_end = .;
. = ALIGN(4096);
__nosave_begin = .;
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data.nosave) }
. = ALIGN(4096);
__nosave_end = .;
__bss_start = .; /* BSS */
.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
*(.bss.page_aligned)
*(.bss)
}
__bss_stop = .;
_end = . ;
/* Sections to be discarded */
/DISCARD/ : {
*(.exitcall.exit)
*(.eh_frame)
}
STABS_DEBUG
DWARF_DEBUG
}