linux/drivers/net/wireless/libertas/if_usb.c

1190 lines
30 KiB
C
Raw Normal View History

/*
* This file contains functions used in USB interface module.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/netdevice.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/usb.h>
#ifdef CONFIG_OLPC
#include <asm/olpc.h>
#endif
#define DRV_NAME "usb8xxx"
#include "host.h"
#include "decl.h"
#include "defs.h"
#include "dev.h"
#include "cmd.h"
#include "if_usb.h"
#define INSANEDEBUG 0
#define lbs_deb_usb2(...) do { if (INSANEDEBUG) lbs_deb_usbd(__VA_ARGS__); } while (0)
#define MESSAGE_HEADER_LEN 4
static char *lbs_fw_name = NULL;
module_param_named(fw_name, lbs_fw_name, charp, 0644);
MODULE_FIRMWARE("libertas/usb8388_v9.bin");
MODULE_FIRMWARE("libertas/usb8388_v5.bin");
MODULE_FIRMWARE("libertas/usb8388.bin");
MODULE_FIRMWARE("libertas/usb8682.bin");
MODULE_FIRMWARE("usb8388.bin");
enum {
MODEL_UNKNOWN = 0x0,
MODEL_8388 = 0x1,
MODEL_8682 = 0x2
};
static struct usb_device_id if_usb_table[] = {
/* Enter the device signature inside */
{ USB_DEVICE(0x1286, 0x2001), .driver_info = MODEL_8388 },
{ USB_DEVICE(0x05a3, 0x8388), .driver_info = MODEL_8388 },
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, if_usb_table);
static void if_usb_receive(struct urb *urb);
static void if_usb_receive_fwload(struct urb *urb);
static int __if_usb_prog_firmware(struct if_usb_card *cardp,
const char *fwname, int cmd);
static int if_usb_prog_firmware(struct if_usb_card *cardp,
const char *fwname, int cmd);
static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
uint8_t *payload, uint16_t nb);
static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload,
uint16_t nb);
static void if_usb_free(struct if_usb_card *cardp);
static int if_usb_submit_rx_urb(struct if_usb_card *cardp);
static int if_usb_reset_device(struct if_usb_card *cardp);
/* sysfs hooks */
/*
* Set function to write firmware to device's persistent memory
*/
static ssize_t if_usb_firmware_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct if_usb_card *cardp = priv->card;
int ret;
BUG_ON(buf == NULL);
ret = if_usb_prog_firmware(cardp, buf, BOOT_CMD_UPDATE_FW);
if (ret == 0)
return count;
return ret;
}
/*
* lbs_flash_fw attribute to be exported per ethX interface through sysfs
* (/sys/class/net/ethX/lbs_flash_fw). Use this like so to write firmware to
* the device's persistent memory:
* echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_fw
*/
static DEVICE_ATTR(lbs_flash_fw, 0200, NULL, if_usb_firmware_set);
/**
* if_usb_boot2_set - write firmware to device's persistent memory
*
* @dev: target device
* @attr: device attributes
* @buf: firmware buffer to write
* @count: number of bytes to write
*
* returns: number of bytes written or negative error code
*/
static ssize_t if_usb_boot2_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct if_usb_card *cardp = priv->card;
int ret;
BUG_ON(buf == NULL);
ret = if_usb_prog_firmware(cardp, buf, BOOT_CMD_UPDATE_BOOT2);
if (ret == 0)
return count;
return ret;
}
/*
* lbs_flash_boot2 attribute to be exported per ethX interface through sysfs
* (/sys/class/net/ethX/lbs_flash_boot2). Use this like so to write firmware
* to the device's persistent memory:
* echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_boot2
*/
static DEVICE_ATTR(lbs_flash_boot2, 0200, NULL, if_usb_boot2_set);
/**
* if_usb_write_bulk_callback - callback function to handle the status
* of the URB
* @urb: pointer to &urb structure
* returns: N/A
*/
static void if_usb_write_bulk_callback(struct urb *urb)
{
struct if_usb_card *cardp = (struct if_usb_card *) urb->context;
/* handle the transmission complete validations */
if (urb->status == 0) {
struct lbs_private *priv = cardp->priv;
lbs_deb_usb2(&urb->dev->dev, "URB status is successful\n");
lbs_deb_usb2(&urb->dev->dev, "Actual length transmitted %d\n",
urb->actual_length);
/* Boot commands such as UPDATE_FW and UPDATE_BOOT2 are not
* passed up to the lbs level.
*/
if (priv && priv->dnld_sent != DNLD_BOOTCMD_SENT)
lbs_host_to_card_done(priv);
} else {
/* print the failure status number for debug */
pr_info("URB in failure status: %d\n", urb->status);
}
}
/**
* if_usb_free - free tx/rx urb, skb and rx buffer
* @cardp: pointer to &if_usb_card
* returns: N/A
*/
static void if_usb_free(struct if_usb_card *cardp)
{
lbs_deb_enter(LBS_DEB_USB);
/* Unlink tx & rx urb */
usb_kill_urb(cardp->tx_urb);
usb_kill_urb(cardp->rx_urb);
usb_free_urb(cardp->tx_urb);
cardp->tx_urb = NULL;
usb_free_urb(cardp->rx_urb);
cardp->rx_urb = NULL;
kfree(cardp->ep_out_buf);
cardp->ep_out_buf = NULL;
lbs_deb_leave(LBS_DEB_USB);
}
static void if_usb_setup_firmware(struct lbs_private *priv)
{
struct if_usb_card *cardp = priv->card;
struct cmd_ds_set_boot2_ver b2_cmd;
struct cmd_ds_802_11_fw_wake_method wake_method;
b2_cmd.hdr.size = cpu_to_le16(sizeof(b2_cmd));
b2_cmd.action = 0;
b2_cmd.version = cardp->boot2_version;
if (lbs_cmd_with_response(priv, CMD_SET_BOOT2_VER, &b2_cmd))
lbs_deb_usb("Setting boot2 version failed\n");
priv->wol_gpio = 2; /* Wake via GPIO2... */
priv->wol_gap = 20; /* ... after 20ms */
lbs_host_sleep_cfg(priv, EHS_WAKE_ON_UNICAST_DATA,
(struct wol_config *) NULL);
wake_method.hdr.size = cpu_to_le16(sizeof(wake_method));
wake_method.action = cpu_to_le16(CMD_ACT_GET);
if (lbs_cmd_with_response(priv, CMD_802_11_FW_WAKE_METHOD, &wake_method)) {
netdev_info(priv->dev, "Firmware does not seem to support PS mode\n");
priv->fwcapinfo &= ~FW_CAPINFO_PS;
} else {
if (le16_to_cpu(wake_method.method) == CMD_WAKE_METHOD_COMMAND_INT) {
lbs_deb_usb("Firmware seems to support PS with wake-via-command\n");
} else {
/* The versions which boot up this way don't seem to
work even if we set it to the command interrupt */
priv->fwcapinfo &= ~FW_CAPINFO_PS;
netdev_info(priv->dev,
"Firmware doesn't wake via command interrupt; disabling PS mode\n");
}
}
}
static void if_usb_fw_timeo(unsigned long priv)
{
struct if_usb_card *cardp = (void *)priv;
if (cardp->fwdnldover) {
lbs_deb_usb("Download complete, no event. Assuming success\n");
} else {
pr_err("Download timed out\n");
cardp->surprise_removed = 1;
}
wake_up(&cardp->fw_wq);
}
#ifdef CONFIG_OLPC
static void if_usb_reset_olpc_card(struct lbs_private *priv)
{
printk(KERN_CRIT "Resetting OLPC wireless via EC...\n");
olpc_ec_cmd(0x25, NULL, 0, NULL, 0);
}
#endif
/**
* if_usb_probe - sets the configuration values
* @intf: &usb_interface pointer
* @id: pointer to usb_device_id
* returns: 0 on success, error code on failure
*/
static int if_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev;
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
struct lbs_private *priv;
struct if_usb_card *cardp;
int i;
udev = interface_to_usbdev(intf);
cardp = kzalloc(sizeof(struct if_usb_card), GFP_KERNEL);
if (!cardp)
goto error;
setup_timer(&cardp->fw_timeout, if_usb_fw_timeo, (unsigned long)cardp);
init_waitqueue_head(&cardp->fw_wq);
cardp->udev = udev;
cardp->model = (uint32_t) id->driver_info;
iface_desc = intf->cur_altsetting;
lbs_deb_usbd(&udev->dev, "bcdUSB = 0x%X bDeviceClass = 0x%X"
" bDeviceSubClass = 0x%X, bDeviceProtocol = 0x%X\n",
le16_to_cpu(udev->descriptor.bcdUSB),
udev->descriptor.bDeviceClass,
udev->descriptor.bDeviceSubClass,
udev->descriptor.bDeviceProtocol);
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
if (usb_endpoint_is_bulk_in(endpoint)) {
cardp->ep_in_size = le16_to_cpu(endpoint->wMaxPacketSize);
cardp->ep_in = usb_endpoint_num(endpoint);
lbs_deb_usbd(&udev->dev, "in_endpoint = %d\n", cardp->ep_in);
lbs_deb_usbd(&udev->dev, "Bulk in size is %d\n", cardp->ep_in_size);
} else if (usb_endpoint_is_bulk_out(endpoint)) {
cardp->ep_out_size = le16_to_cpu(endpoint->wMaxPacketSize);
cardp->ep_out = usb_endpoint_num(endpoint);
lbs_deb_usbd(&udev->dev, "out_endpoint = %d\n", cardp->ep_out);
lbs_deb_usbd(&udev->dev, "Bulk out size is %d\n", cardp->ep_out_size);
}
}
if (!cardp->ep_out_size || !cardp->ep_in_size) {
lbs_deb_usbd(&udev->dev, "Endpoints not found\n");
goto dealloc;
}
if (!(cardp->rx_urb = usb_alloc_urb(0, GFP_KERNEL))) {
lbs_deb_usbd(&udev->dev, "Rx URB allocation failed\n");
goto dealloc;
}
if (!(cardp->tx_urb = usb_alloc_urb(0, GFP_KERNEL))) {
lbs_deb_usbd(&udev->dev, "Tx URB allocation failed\n");
goto dealloc;
}
cardp->ep_out_buf = kmalloc(MRVDRV_ETH_TX_PACKET_BUFFER_SIZE, GFP_KERNEL);
if (!cardp->ep_out_buf) {
lbs_deb_usbd(&udev->dev, "Could not allocate buffer\n");
goto dealloc;
}
/* Upload firmware */
kparam_block_sysfs_write(fw_name);
if (__if_usb_prog_firmware(cardp, lbs_fw_name, BOOT_CMD_FW_BY_USB)) {
kparam_unblock_sysfs_write(fw_name);
lbs_deb_usbd(&udev->dev, "FW upload failed\n");
goto err_prog_firmware;
}
kparam_unblock_sysfs_write(fw_name);
if (!(priv = lbs_add_card(cardp, &intf->dev)))
goto err_prog_firmware;
cardp->priv = priv;
cardp->priv->fw_ready = 1;
priv->hw_host_to_card = if_usb_host_to_card;
priv->enter_deep_sleep = NULL;
priv->exit_deep_sleep = NULL;
priv->reset_deep_sleep_wakeup = NULL;
#ifdef CONFIG_OLPC
if (machine_is_olpc())
priv->reset_card = if_usb_reset_olpc_card;
#endif
cardp->boot2_version = udev->descriptor.bcdDevice;
if_usb_submit_rx_urb(cardp);
if (lbs_start_card(priv))
goto err_start_card;
if_usb_setup_firmware(priv);
usb_get_dev(udev);
usb_set_intfdata(intf, cardp);
if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_fw))
netdev_err(priv->dev,
"cannot register lbs_flash_fw attribute\n");
if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2))
netdev_err(priv->dev,
"cannot register lbs_flash_boot2 attribute\n");
/*
* EHS_REMOVE_WAKEUP is not supported on all versions of the firmware.
*/
priv->wol_criteria = EHS_REMOVE_WAKEUP;
if (lbs_host_sleep_cfg(priv, priv->wol_criteria, NULL))
priv->ehs_remove_supported = false;
return 0;
err_start_card:
lbs_remove_card(priv);
err_prog_firmware:
if_usb_reset_device(cardp);
dealloc:
if_usb_free(cardp);
error:
return -ENOMEM;
}
/**
* if_usb_disconnect - free resource and cleanup
* @intf: USB interface structure
* returns: N/A
*/
static void if_usb_disconnect(struct usb_interface *intf)
{
struct if_usb_card *cardp = usb_get_intfdata(intf);
struct lbs_private *priv = (struct lbs_private *) cardp->priv;
lbs_deb_enter(LBS_DEB_MAIN);
device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2);
device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_fw);
cardp->surprise_removed = 1;
if (priv) {
priv->surpriseremoved = 1;
lbs_stop_card(priv);
lbs_remove_card(priv);
}
/* Unlink and free urb */
if_usb_free(cardp);
usb_set_intfdata(intf, NULL);
usb_put_dev(interface_to_usbdev(intf));
lbs_deb_leave(LBS_DEB_MAIN);
}
/**
* if_usb_send_fw_pkt - download FW
* @cardp: pointer to &struct if_usb_card
* returns: 0
*/
static int if_usb_send_fw_pkt(struct if_usb_card *cardp)
{
struct fwdata *fwdata = cardp->ep_out_buf;
const uint8_t *firmware = cardp->fw->data;
/* If we got a CRC failure on the last block, back
up and retry it */
if (!cardp->CRC_OK) {
cardp->totalbytes = cardp->fwlastblksent;
cardp->fwseqnum--;
}
lbs_deb_usb2(&cardp->udev->dev, "totalbytes = %d\n",
cardp->totalbytes);
/* struct fwdata (which we sent to the card) has an
extra __le32 field in between the header and the data,
which is not in the struct fwheader in the actual
firmware binary. Insert the seqnum in the middle... */
memcpy(&fwdata->hdr, &firmware[cardp->totalbytes],
sizeof(struct fwheader));
cardp->fwlastblksent = cardp->totalbytes;
cardp->totalbytes += sizeof(struct fwheader);
memcpy(fwdata->data, &firmware[cardp->totalbytes],
le32_to_cpu(fwdata->hdr.datalength));
lbs_deb_usb2(&cardp->udev->dev, "Data length = %d\n",
le32_to_cpu(fwdata->hdr.datalength));
fwdata->seqnum = cpu_to_le32(++cardp->fwseqnum);
cardp->totalbytes += le32_to_cpu(fwdata->hdr.datalength);
usb_tx_block(cardp, cardp->ep_out_buf, sizeof(struct fwdata) +
le32_to_cpu(fwdata->hdr.datalength));
if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_DATA_TO_RECV)) {
lbs_deb_usb2(&cardp->udev->dev, "There are data to follow\n");
lbs_deb_usb2(&cardp->udev->dev, "seqnum = %d totalbytes = %d\n",
cardp->fwseqnum, cardp->totalbytes);
} else if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_LAST_BLOCK)) {
lbs_deb_usb2(&cardp->udev->dev, "Host has finished FW downloading\n");
lbs_deb_usb2(&cardp->udev->dev, "Donwloading FW JUMP BLOCK\n");
cardp->fwfinalblk = 1;
}
lbs_deb_usb2(&cardp->udev->dev, "Firmware download done; size %d\n",
cardp->totalbytes);
return 0;
}
static int if_usb_reset_device(struct if_usb_card *cardp)
{
struct cmd_header *cmd = cardp->ep_out_buf + 4;
int ret;
lbs_deb_enter(LBS_DEB_USB);
*(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST);
cmd->command = cpu_to_le16(CMD_802_11_RESET);
cmd->size = cpu_to_le16(sizeof(cmd));
cmd->result = cpu_to_le16(0);
cmd->seqnum = cpu_to_le16(0x5a5a);
usb_tx_block(cardp, cardp->ep_out_buf, 4 + sizeof(struct cmd_header));
msleep(100);
ret = usb_reset_device(cardp->udev);
msleep(100);
#ifdef CONFIG_OLPC
if (ret && machine_is_olpc())
if_usb_reset_olpc_card(NULL);
#endif
lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret);
return ret;
}
/**
* usb_tx_block - transfer the data to the device
* @cardp: pointer to &struct if_usb_card
* @payload: pointer to payload data
* @nb: data length
* returns: 0 for success or negative error code
*/
static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, uint16_t nb)
{
int ret;
/* check if device is removed */
if (cardp->surprise_removed) {
lbs_deb_usbd(&cardp->udev->dev, "Device removed\n");
ret = -ENODEV;
goto tx_ret;
}
usb_fill_bulk_urb(cardp->tx_urb, cardp->udev,
usb_sndbulkpipe(cardp->udev,
cardp->ep_out),
payload, nb, if_usb_write_bulk_callback, cardp);
cardp->tx_urb->transfer_flags |= URB_ZERO_PACKET;
if ((ret = usb_submit_urb(cardp->tx_urb, GFP_ATOMIC))) {
lbs_deb_usbd(&cardp->udev->dev, "usb_submit_urb failed: %d\n", ret);
} else {
lbs_deb_usb2(&cardp->udev->dev, "usb_submit_urb success\n");
ret = 0;
}
tx_ret:
return ret;
}
static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
void (*callbackfn)(struct urb *urb))
{
struct sk_buff *skb;
int ret = -1;
if (!(skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE))) {
pr_err("No free skb\n");
goto rx_ret;
}
cardp->rx_skb = skb;
/* Fill the receive configuration URB and initialise the Rx call back */
usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
usb_rcvbulkpipe(cardp->udev, cardp->ep_in),
skb->data + IPFIELD_ALIGN_OFFSET,
MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
cardp);
cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET;
lbs_deb_usb2(&cardp->udev->dev, "Pointer for rx_urb %p\n", cardp->rx_urb);
if ((ret = usb_submit_urb(cardp->rx_urb, GFP_ATOMIC))) {
lbs_deb_usbd(&cardp->udev->dev, "Submit Rx URB failed: %d\n", ret);
kfree_skb(skb);
cardp->rx_skb = NULL;
ret = -1;
} else {
lbs_deb_usb2(&cardp->udev->dev, "Submit Rx URB success\n");
ret = 0;
}
rx_ret:
return ret;
}
static int if_usb_submit_rx_urb_fwload(struct if_usb_card *cardp)
{
return __if_usb_submit_rx_urb(cardp, &if_usb_receive_fwload);
}
static int if_usb_submit_rx_urb(struct if_usb_card *cardp)
{
return __if_usb_submit_rx_urb(cardp, &if_usb_receive);
}
static void if_usb_receive_fwload(struct urb *urb)
{
struct if_usb_card *cardp = urb->context;
struct sk_buff *skb = cardp->rx_skb;
struct fwsyncheader *syncfwheader;
struct bootcmdresp bootcmdresp;
if (urb->status) {
lbs_deb_usbd(&cardp->udev->dev,
"URB status is failed during fw load\n");
kfree_skb(skb);
return;
}
if (cardp->fwdnldover) {
__le32 *tmp = (__le32 *)(skb->data + IPFIELD_ALIGN_OFFSET);
if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) &&
tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY)) {
pr_info("Firmware ready event received\n");
wake_up(&cardp->fw_wq);
} else {
lbs_deb_usb("Waiting for confirmation; got %x %x\n",
le32_to_cpu(tmp[0]), le32_to_cpu(tmp[1]));
if_usb_submit_rx_urb_fwload(cardp);
}
kfree_skb(skb);
return;
}
if (cardp->bootcmdresp <= 0) {
memcpy (&bootcmdresp, skb->data + IPFIELD_ALIGN_OFFSET,
sizeof(bootcmdresp));
if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) {
kfree_skb(skb);
if_usb_submit_rx_urb_fwload(cardp);
cardp->bootcmdresp = BOOT_CMD_RESP_OK;
lbs_deb_usbd(&cardp->udev->dev,
"Received valid boot command response\n");
return;
}
if (bootcmdresp.magic != cpu_to_le32(BOOT_CMD_MAGIC_NUMBER)) {
if (bootcmdresp.magic == cpu_to_le32(CMD_TYPE_REQUEST) ||
bootcmdresp.magic == cpu_to_le32(CMD_TYPE_DATA) ||
bootcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION)) {
if (!cardp->bootcmdresp)
pr_info("Firmware already seems alive; resetting\n");
cardp->bootcmdresp = -1;
} else {
pr_info("boot cmd response wrong magic number (0x%x)\n",
le32_to_cpu(bootcmdresp.magic));
}
} else if ((bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) &&
(bootcmdresp.cmd != BOOT_CMD_UPDATE_FW) &&
(bootcmdresp.cmd != BOOT_CMD_UPDATE_BOOT2)) {
pr_info("boot cmd response cmd_tag error (%d)\n",
bootcmdresp.cmd);
} else if (bootcmdresp.result != BOOT_CMD_RESP_OK) {
pr_info("boot cmd response result error (%d)\n",
bootcmdresp.result);
} else {
cardp->bootcmdresp = 1;
lbs_deb_usbd(&cardp->udev->dev,
"Received valid boot command response\n");
}
kfree_skb(skb);
if_usb_submit_rx_urb_fwload(cardp);
return;
}
syncfwheader = kmemdup(skb->data + IPFIELD_ALIGN_OFFSET,
sizeof(struct fwsyncheader), GFP_ATOMIC);
if (!syncfwheader) {
lbs_deb_usbd(&cardp->udev->dev, "Failure to allocate syncfwheader\n");
kfree_skb(skb);
return;
}
if (!syncfwheader->cmd) {
lbs_deb_usb2(&cardp->udev->dev, "FW received Blk with correct CRC\n");
lbs_deb_usb2(&cardp->udev->dev, "FW received Blk seqnum = %d\n",
le32_to_cpu(syncfwheader->seqnum));
cardp->CRC_OK = 1;
} else {
lbs_deb_usbd(&cardp->udev->dev, "FW received Blk with CRC error\n");
cardp->CRC_OK = 0;
}
kfree_skb(skb);
/* Give device 5s to either write firmware to its RAM or eeprom */
mod_timer(&cardp->fw_timeout, jiffies + (HZ*5));
if (cardp->fwfinalblk) {
cardp->fwdnldover = 1;
goto exit;
}
if_usb_send_fw_pkt(cardp);
exit:
if_usb_submit_rx_urb_fwload(cardp);
kfree(syncfwheader);
}
#define MRVDRV_MIN_PKT_LEN 30
static inline void process_cmdtypedata(int recvlength, struct sk_buff *skb,
struct if_usb_card *cardp,
struct lbs_private *priv)
{
if (recvlength > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + MESSAGE_HEADER_LEN
|| recvlength < MRVDRV_MIN_PKT_LEN) {
lbs_deb_usbd(&cardp->udev->dev, "Packet length is Invalid\n");
kfree_skb(skb);
return;
}
skb_reserve(skb, IPFIELD_ALIGN_OFFSET);
skb_put(skb, recvlength);
skb_pull(skb, MESSAGE_HEADER_LEN);
lbs_process_rxed_packet(priv, skb);
}
static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff,
struct sk_buff *skb,
struct if_usb_card *cardp,
struct lbs_private *priv)
{
u8 i;
if (recvlength > LBS_CMD_BUFFER_SIZE) {
lbs_deb_usbd(&cardp->udev->dev,
"The receive buffer is too large\n");
kfree_skb(skb);
return;
}
BUG_ON(!in_interrupt());
spin_lock(&priv->driver_lock);
i = (priv->resp_idx == 0) ? 1 : 0;
BUG_ON(priv->resp_len[i]);
priv->resp_len[i] = (recvlength - MESSAGE_HEADER_LEN);
memcpy(priv->resp_buf[i], recvbuff + MESSAGE_HEADER_LEN,
priv->resp_len[i]);
kfree_skb(skb);
lbs_notify_command_response(priv, i);
spin_unlock(&priv->driver_lock);
lbs_deb_usbd(&cardp->udev->dev,
"Wake up main thread to handle cmd response\n");
}
/**
* if_usb_receive - read the packet into the upload buffer,
* wake up the main thread and initialise the Rx callack
*
* @urb: pointer to &struct urb
* returns: N/A
*/
static void if_usb_receive(struct urb *urb)
{
struct if_usb_card *cardp = urb->context;
struct sk_buff *skb = cardp->rx_skb;
struct lbs_private *priv = cardp->priv;
int recvlength = urb->actual_length;
uint8_t *recvbuff = NULL;
uint32_t recvtype = 0;
__le32 *pkt = (__le32 *)(skb->data + IPFIELD_ALIGN_OFFSET);
uint32_t event;
lbs_deb_enter(LBS_DEB_USB);
if (recvlength) {
if (urb->status) {
lbs_deb_usbd(&cardp->udev->dev, "RX URB failed: %d\n",
urb->status);
kfree_skb(skb);
goto setup_for_next;
}
recvbuff = skb->data + IPFIELD_ALIGN_OFFSET;
recvtype = le32_to_cpu(pkt[0]);
lbs_deb_usbd(&cardp->udev->dev,
"Recv length = 0x%x, Recv type = 0x%X\n",
recvlength, recvtype);
} else if (urb->status) {
kfree_skb(skb);
goto rx_exit;
}
switch (recvtype) {
case CMD_TYPE_DATA:
process_cmdtypedata(recvlength, skb, cardp, priv);
break;
case CMD_TYPE_REQUEST:
process_cmdrequest(recvlength, recvbuff, skb, cardp, priv);
break;
case CMD_TYPE_INDICATION:
/* Event handling */
event = le32_to_cpu(pkt[1]);
lbs_deb_usbd(&cardp->udev->dev, "**EVENT** 0x%X\n", event);
kfree_skb(skb);
/* Icky undocumented magic special case */
if (event & 0xffff0000) {
u32 trycount = (event & 0xffff0000) >> 16;
lbs_send_tx_feedback(priv, trycount);
} else
lbs_queue_event(priv, event & 0xFF);
break;
default:
lbs_deb_usbd(&cardp->udev->dev, "Unknown command type 0x%X\n",
recvtype);
kfree_skb(skb);
break;
}
setup_for_next:
if_usb_submit_rx_urb(cardp);
rx_exit:
lbs_deb_leave(LBS_DEB_USB);
}
/**
* if_usb_host_to_card - downloads data to FW
* @priv: pointer to &struct lbs_private structure
* @type: type of data
* @payload: pointer to data buffer
* @nb: number of bytes
* returns: 0 for success or negative error code
*/
static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
uint8_t *payload, uint16_t nb)
{
struct if_usb_card *cardp = priv->card;
lbs_deb_usbd(&cardp->udev->dev,"*** type = %u\n", type);
lbs_deb_usbd(&cardp->udev->dev,"size after = %d\n", nb);
if (type == MVMS_CMD) {
*(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST);
priv->dnld_sent = DNLD_CMD_SENT;
} else {
*(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_DATA);
priv->dnld_sent = DNLD_DATA_SENT;
}
memcpy((cardp->ep_out_buf + MESSAGE_HEADER_LEN), payload, nb);
return usb_tx_block(cardp, cardp->ep_out_buf, nb + MESSAGE_HEADER_LEN);
}
/**
* if_usb_issue_boot_command - issues Boot command to the Boot2 code
* @cardp: pointer to &if_usb_card
* @ivalue: 1:Boot from FW by USB-Download
* 2:Boot from FW in EEPROM
* returns: 0 for success or negative error code
*/
static int if_usb_issue_boot_command(struct if_usb_card *cardp, int ivalue)
{
struct bootcmd *bootcmd = cardp->ep_out_buf;
/* Prepare command */
bootcmd->magic = cpu_to_le32(BOOT_CMD_MAGIC_NUMBER);
bootcmd->cmd = ivalue;
memset(bootcmd->pad, 0, sizeof(bootcmd->pad));
/* Issue command */
usb_tx_block(cardp, cardp->ep_out_buf, sizeof(*bootcmd));
return 0;
}
/**
* check_fwfile_format - check the validity of Boot2/FW image
*
* @data: pointer to image
* @totlen: image length
* returns: 0 (good) or 1 (failure)
*/
static int check_fwfile_format(const uint8_t *data, uint32_t totlen)
{
uint32_t bincmd, exit;
uint32_t blksize, offset, len;
int ret;
ret = 1;
exit = len = 0;
do {
struct fwheader *fwh = (void *)data;
bincmd = le32_to_cpu(fwh->dnldcmd);
blksize = le32_to_cpu(fwh->datalength);
switch (bincmd) {
case FW_HAS_DATA_TO_RECV:
offset = sizeof(struct fwheader) + blksize;
data += offset;
len += offset;
if (len >= totlen)
exit = 1;
break;
case FW_HAS_LAST_BLOCK:
exit = 1;
ret = 0;
break;
default:
exit = 1;
break;
}
} while (!exit);
if (ret)
pr_err("firmware file format check FAIL\n");
else
lbs_deb_fw("firmware file format check PASS\n");
return ret;
}
/**
* if_usb_prog_firmware - programs the firmware subject to cmd
*
* @cardp: the if_usb_card descriptor
* @fwname: firmware or boot2 image file name
* @cmd: either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW,
* or BOOT_CMD_UPDATE_BOOT2.
* returns: 0 or error code
*/
static int if_usb_prog_firmware(struct if_usb_card *cardp,
const char *fwname, int cmd)
{
struct lbs_private *priv = cardp->priv;
unsigned long flags, caps;
int ret;
caps = priv->fwcapinfo;
if (((cmd == BOOT_CMD_UPDATE_FW) && !(caps & FW_CAPINFO_FIRMWARE_UPGRADE)) ||
((cmd == BOOT_CMD_UPDATE_BOOT2) && !(caps & FW_CAPINFO_BOOT2_UPGRADE)))
return -EOPNOTSUPP;
/* Ensure main thread is idle. */
spin_lock_irqsave(&priv->driver_lock, flags);
while (priv->cur_cmd != NULL || priv->dnld_sent != DNLD_RES_RECEIVED) {
spin_unlock_irqrestore(&priv->driver_lock, flags);
if (wait_event_interruptible(priv->waitq,
(priv->cur_cmd == NULL &&
priv->dnld_sent == DNLD_RES_RECEIVED))) {
return -ERESTARTSYS;
}
spin_lock_irqsave(&priv->driver_lock, flags);
}
priv->dnld_sent = DNLD_BOOTCMD_SENT;
spin_unlock_irqrestore(&priv->driver_lock, flags);
ret = __if_usb_prog_firmware(cardp, fwname, cmd);
spin_lock_irqsave(&priv->driver_lock, flags);
priv->dnld_sent = DNLD_RES_RECEIVED;
spin_unlock_irqrestore(&priv->driver_lock, flags);
wake_up(&priv->waitq);
return ret;
}
/* table of firmware file names */
static const struct {
u32 model;
const char *fwname;
} fw_table[] = {
{ MODEL_8388, "libertas/usb8388_v9.bin" },
{ MODEL_8388, "libertas/usb8388_v5.bin" },
{ MODEL_8388, "libertas/usb8388.bin" },
{ MODEL_8388, "usb8388.bin" },
{ MODEL_8682, "libertas/usb8682.bin" }
};
#ifdef CONFIG_OLPC
static int try_olpc_fw(struct if_usb_card *cardp)
{
int retval = -ENOENT;
/* try the OLPC firmware first; fall back to fw_table list */
if (machine_is_olpc() && cardp->model == MODEL_8388)
retval = request_firmware(&cardp->fw,
"libertas/usb8388_olpc.bin", &cardp->udev->dev);
return retval;
}
#else
static int try_olpc_fw(struct if_usb_card *cardp) { return -ENOENT; }
#endif /* !CONFIG_OLPC */
static int get_fw(struct if_usb_card *cardp, const char *fwname)
{
int i;
/* Try user-specified firmware first */
if (fwname)
return request_firmware(&cardp->fw, fwname, &cardp->udev->dev);
/* Handle OLPC firmware */
if (try_olpc_fw(cardp) == 0)
return 0;
/* Otherwise search for firmware to use */
for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
if (fw_table[i].model != cardp->model)
continue;
if (request_firmware(&cardp->fw, fw_table[i].fwname,
&cardp->udev->dev) == 0)
return 0;
}
return -ENOENT;
}
static int __if_usb_prog_firmware(struct if_usb_card *cardp,
const char *fwname, int cmd)
{
int i = 0;
static int reset_count = 10;
int ret = 0;
lbs_deb_enter(LBS_DEB_USB);
ret = get_fw(cardp, fwname);
if (ret) {
pr_err("failed to find firmware (%d)\n", ret);
goto done;
}
if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) {
ret = -EINVAL;
goto release_fw;
}
/* Cancel any pending usb business */
usb_kill_urb(cardp->rx_urb);
usb_kill_urb(cardp->tx_urb);
cardp->fwlastblksent = 0;
cardp->fwdnldover = 0;
cardp->totalbytes = 0;
cardp->fwfinalblk = 0;
cardp->bootcmdresp = 0;
restart:
if (if_usb_submit_rx_urb_fwload(cardp) < 0) {
lbs_deb_usbd(&cardp->udev->dev, "URB submission is failed\n");
ret = -EIO;
goto release_fw;
}
cardp->bootcmdresp = 0;
do {
int j = 0;
i++;
if_usb_issue_boot_command(cardp, cmd);
/* wait for command response */
do {
j++;
msleep_interruptible(100);
} while (cardp->bootcmdresp == 0 && j < 10);
} while (cardp->bootcmdresp == 0 && i < 5);
if (cardp->bootcmdresp == BOOT_CMD_RESP_NOT_SUPPORTED) {
/* Return to normal operation */
ret = -EOPNOTSUPP;
usb_kill_urb(cardp->rx_urb);
usb_kill_urb(cardp->tx_urb);
if (if_usb_submit_rx_urb(cardp) < 0)
ret = -EIO;
goto release_fw;
} else if (cardp->bootcmdresp <= 0) {
if (--reset_count >= 0) {
if_usb_reset_device(cardp);
goto restart;
}
ret = -EIO;
goto release_fw;
}
i = 0;
cardp->totalbytes = 0;
cardp->fwlastblksent = 0;
cardp->CRC_OK = 1;
cardp->fwdnldover = 0;
cardp->fwseqnum = -1;
cardp->totalbytes = 0;
cardp->fwfinalblk = 0;
/* Send the first firmware packet... */
if_usb_send_fw_pkt(cardp);
/* ... and wait for the process to complete */
wait_event_interruptible(cardp->fw_wq, cardp->surprise_removed || cardp->fwdnldover);
del_timer_sync(&cardp->fw_timeout);
usb_kill_urb(cardp->rx_urb);
if (!cardp->fwdnldover) {
pr_info("failed to load fw, resetting device!\n");
if (--reset_count >= 0) {
if_usb_reset_device(cardp);
goto restart;
}
pr_info("FW download failure, time = %d ms\n", i * 100);
ret = -EIO;
goto release_fw;
}
release_fw:
release_firmware(cardp->fw);
cardp->fw = NULL;
done:
lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret);
return ret;
}
#ifdef CONFIG_PM
static int if_usb_suspend(struct usb_interface *intf, pm_message_t message)
{
struct if_usb_card *cardp = usb_get_intfdata(intf);
struct lbs_private *priv = cardp->priv;
int ret;
lbs_deb_enter(LBS_DEB_USB);
if (priv->psstate != PS_STATE_FULL_POWER)
return -1;
#ifdef CONFIG_OLPC
if (machine_is_olpc()) {
if (priv->wol_criteria == EHS_REMOVE_WAKEUP)
olpc_ec_wakeup_clear(EC_SCI_SRC_WLAN);
else
olpc_ec_wakeup_set(EC_SCI_SRC_WLAN);
}
#endif
ret = lbs_suspend(priv);
if (ret)
goto out;
/* Unlink tx & rx urb */
usb_kill_urb(cardp->tx_urb);
usb_kill_urb(cardp->rx_urb);
out:
lbs_deb_leave(LBS_DEB_USB);
return ret;
}
static int if_usb_resume(struct usb_interface *intf)
{
struct if_usb_card *cardp = usb_get_intfdata(intf);
struct lbs_private *priv = cardp->priv;
lbs_deb_enter(LBS_DEB_USB);
if_usb_submit_rx_urb(cardp);
lbs_resume(priv);
lbs_deb_leave(LBS_DEB_USB);
return 0;
}
#else
#define if_usb_suspend NULL
#define if_usb_resume NULL
#endif
static struct usb_driver if_usb_driver = {
.name = DRV_NAME,
.probe = if_usb_probe,
.disconnect = if_usb_disconnect,
.id_table = if_usb_table,
.suspend = if_usb_suspend,
.resume = if_usb_resume,
.reset_resume = if_usb_resume,
};
module_usb_driver(if_usb_driver);
MODULE_DESCRIPTION("8388 USB WLAN Driver");
MODULE_AUTHOR("Marvell International Ltd. and Red Hat, Inc.");
MODULE_LICENSE("GPL");