linux/drivers/net/wireless/orinoco/cfg.c

204 lines
4.5 KiB
C
Raw Normal View History

/* cfg80211 support
*
* See copyright notice in main.c
*/
#include <linux/ieee80211.h>
#include <net/cfg80211.h>
#include "hw.h"
#include "main.h"
#include "orinoco.h"
#include "cfg.h"
/* Supported bitrates. Must agree with hw.c */
static struct ieee80211_rate orinoco_rates[] = {
{ .bitrate = 10 },
{ .bitrate = 20 },
{ .bitrate = 55 },
{ .bitrate = 110 },
};
static const void * const orinoco_wiphy_privid = &orinoco_wiphy_privid;
/* Called after orinoco_private is allocated. */
void orinoco_wiphy_init(struct wiphy *wiphy)
{
struct orinoco_private *priv = wiphy_priv(wiphy);
wiphy->privid = orinoco_wiphy_privid;
set_wiphy_dev(wiphy, priv->dev);
}
/* Called after firmware is initialised */
int orinoco_wiphy_register(struct wiphy *wiphy)
{
struct orinoco_private *priv = wiphy_priv(wiphy);
int i, channels = 0;
if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
wiphy->max_scan_ssids = 1;
else
wiphy->max_scan_ssids = 0;
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
/* TODO: should we set if we only have demo ad-hoc?
* (priv->has_port3)
*/
if (priv->has_ibss)
wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
if (!priv->broken_monitor || force_monitor)
wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
priv->band.bitrates = orinoco_rates;
priv->band.n_bitrates = ARRAY_SIZE(orinoco_rates);
/* Only support channels allowed by the card EEPROM */
for (i = 0; i < NUM_CHANNELS; i++) {
if (priv->channel_mask & (1 << i)) {
priv->channels[i].center_freq =
ieee80211_dsss_chan_to_freq(i+1);
channels++;
}
}
priv->band.channels = priv->channels;
priv->band.n_channels = channels;
wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
i = 0;
if (priv->has_wep) {
priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP40;
i++;
if (priv->has_big_wep) {
priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP104;
i++;
}
}
if (priv->has_wpa) {
priv->cipher_suites[i] = WLAN_CIPHER_SUITE_TKIP;
i++;
}
wiphy->cipher_suites = priv->cipher_suites;
wiphy->n_cipher_suites = i;
wiphy->rts_threshold = priv->rts_thresh;
if (!priv->has_mwo)
wiphy->frag_threshold = priv->frag_thresh;
return wiphy_register(wiphy);
}
static int orinoco_change_vif(struct wiphy *wiphy, struct net_device *dev,
enum nl80211_iftype type, u32 *flags,
struct vif_params *params)
{
struct orinoco_private *priv = wiphy_priv(wiphy);
int err = 0;
unsigned long lock;
if (orinoco_lock(priv, &lock) != 0)
return -EBUSY;
switch (type) {
case NL80211_IFTYPE_ADHOC:
if (!priv->has_ibss && !priv->has_port3)
err = -EINVAL;
break;
case NL80211_IFTYPE_STATION:
break;
case NL80211_IFTYPE_MONITOR:
if (priv->broken_monitor && !force_monitor) {
printk(KERN_WARNING "%s: Monitor mode support is "
"buggy in this firmware, not enabling\n",
wiphy_name(wiphy));
err = -EINVAL;
}
break;
default:
err = -EINVAL;
}
if (!err) {
priv->iw_mode = type;
set_port_type(priv);
err = orinoco_commit(priv);
}
orinoco_unlock(priv, &lock);
return err;
}
static int orinoco_scan(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_scan_request *request)
{
struct orinoco_private *priv = wiphy_priv(wiphy);
int err;
if (!request)
return -EINVAL;
if (priv->scan_request && priv->scan_request != request)
return -EBUSY;
priv->scan_request = request;
err = orinoco_hw_trigger_scan(priv, request->ssids);
return err;
}
static int orinoco_set_channel(struct wiphy *wiphy,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type)
{
struct orinoco_private *priv = wiphy_priv(wiphy);
int err = 0;
unsigned long flags;
int channel;
if (!chan)
return -EINVAL;
if (channel_type != NL80211_CHAN_NO_HT)
return -EINVAL;
if (chan->band != IEEE80211_BAND_2GHZ)
return -EINVAL;
channel = ieee80211_freq_to_dsss_chan(chan->center_freq);
if ((channel < 1) || (channel > NUM_CHANNELS) ||
!(priv->channel_mask & (1 << (channel-1))))
return -EINVAL;
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
priv->channel = channel;
if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
/* Fast channel change - no commit if successful */
hermes_t *hw = &priv->hw;
err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
HERMES_TEST_SET_CHANNEL,
channel, NULL);
}
orinoco_unlock(priv, &flags);
return err;
}
const struct cfg80211_ops orinoco_cfg_ops = {
.change_virtual_intf = orinoco_change_vif,
.set_channel = orinoco_set_channel,
.scan = orinoco_scan,
};