linux/drivers/crypto/caam/error.c

249 lines
7.9 KiB
C
Raw Normal View History

/*
* CAAM Error Reporting
*
* Copyright 2009-2011 Freescale Semiconductor, Inc.
*/
#include "compat.h"
#include "regs.h"
#include "intern.h"
#include "desc.h"
#include "jr.h"
#include "error.h"
#define SPRINTFCAT(str, format, param, max_alloc) \
{ \
char *tmp; \
\
tmp = kmalloc(sizeof(format) + max_alloc, GFP_ATOMIC); \
sprintf(tmp, format, param); \
strcat(str, tmp); \
kfree(tmp); \
}
static void report_jump_idx(u32 status, char *outstr)
{
u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >>
JRSTA_DECOERR_INDEX_SHIFT;
if (status & JRSTA_DECOERR_JUMP)
strcat(outstr, "jump tgt desc idx ");
else
strcat(outstr, "desc idx ");
SPRINTFCAT(outstr, "%d: ", idx, sizeof("255"));
}
static void report_ccb_status(u32 status, char *outstr)
{
char *cha_id_list[] = {
"",
"AES",
"DES, 3DES",
"ARC4",
"MD5, SHA-1, SH-224, SHA-256, SHA-384, SHA-512",
"RNG",
"SNOW f8",
"Kasumi f8, f9",
"All Public Key Algorithms",
"CRC",
"SNOW f9",
};
char *err_id_list[] = {
"None. No error.",
"Mode error.",
"Data size error.",
"Key size error.",
"PKHA A memory size error.",
"PKHA B memory size error.",
"Data arrived out of sequence error.",
"PKHA divide-by-zero error.",
"PKHA modulus even error.",
"DES key parity error.",
"ICV check failed.",
"Hardware error.",
"Unsupported CCM AAD size.",
"Class 1 CHA is not reset",
"Invalid CHA combination was selected",
"Invalid CHA selected.",
};
u8 cha_id = (status & JRSTA_CCBERR_CHAID_MASK) >>
JRSTA_CCBERR_CHAID_SHIFT;
u8 err_id = status & JRSTA_CCBERR_ERRID_MASK;
report_jump_idx(status, outstr);
if (cha_id < ARRAY_SIZE(cha_id_list)) {
SPRINTFCAT(outstr, "%s: ", cha_id_list[cha_id],
strlen(cha_id_list[cha_id]));
} else {
SPRINTFCAT(outstr, "unidentified cha_id value 0x%02x: ",
cha_id, sizeof("ff"));
}
if (err_id < ARRAY_SIZE(err_id_list)) {
SPRINTFCAT(outstr, "%s", err_id_list[err_id],
strlen(err_id_list[err_id]));
} else {
SPRINTFCAT(outstr, "unidentified err_id value 0x%02x",
err_id, sizeof("ff"));
}
}
static void report_jump_status(u32 status, char *outstr)
{
SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__));
}
static void report_deco_status(u32 status, char *outstr)
{
const struct {
u8 value;
char *error_text;
} desc_error_list[] = {
{ 0x00, "None. No error." },
{ 0x01, "SGT Length Error. The descriptor is trying to read "
"more data than is contained in the SGT table." },
{ 0x02, "Reserved." },
{ 0x03, "Job Ring Control Error. There is a bad value in the "
"Job Ring Control register." },
{ 0x04, "Invalid Descriptor Command. The Descriptor Command "
"field is invalid." },
{ 0x05, "Reserved." },
{ 0x06, "Invalid KEY Command" },
{ 0x07, "Invalid LOAD Command" },
{ 0x08, "Invalid STORE Command" },
{ 0x09, "Invalid OPERATION Command" },
{ 0x0A, "Invalid FIFO LOAD Command" },
{ 0x0B, "Invalid FIFO STORE Command" },
{ 0x0C, "Invalid MOVE Command" },
{ 0x0D, "Invalid JUMP Command. A nonlocal JUMP Command is "
"invalid because the target is not a Job Header "
"Command, or the jump is from a Trusted Descriptor to "
"a Job Descriptor, or because the target Descriptor "
"contains a Shared Descriptor." },
{ 0x0E, "Invalid MATH Command" },
{ 0x0F, "Invalid SIGNATURE Command" },
{ 0x10, "Invalid Sequence Command. A SEQ IN PTR OR SEQ OUT PTR "
"Command is invalid or a SEQ KEY, SEQ LOAD, SEQ FIFO "
"LOAD, or SEQ FIFO STORE decremented the input or "
"output sequence length below 0. This error may result "
"if a built-in PROTOCOL Command has encountered a "
"malformed PDU." },
{ 0x11, "Skip data type invalid. The type must be 0xE or 0xF."},
{ 0x12, "Shared Descriptor Header Error" },
{ 0x13, "Header Error. Invalid length or parity, or certain "
"other problems." },
{ 0x14, "Burster Error. Burster has gotten to an illegal "
"state" },
{ 0x15, "Context Register Length Error. The descriptor is "
"trying to read or write past the end of the Context "
"Register. A SEQ LOAD or SEQ STORE with the VLF bit "
"set was executed with too large a length in the "
"variable length register (VSOL for SEQ STORE or VSIL "
"for SEQ LOAD)." },
{ 0x16, "DMA Error" },
{ 0x17, "Reserved." },
{ 0x1A, "Job failed due to JR reset" },
{ 0x1B, "Job failed due to Fail Mode" },
{ 0x1C, "DECO Watchdog timer timeout error" },
{ 0x1D, "DECO tried to copy a key from another DECO but the "
"other DECO's Key Registers were locked" },
{ 0x1E, "DECO attempted to copy data from a DECO that had an "
"unmasked Descriptor error" },
{ 0x1F, "LIODN error. DECO was trying to share from itself or "
"from another DECO but the two Non-SEQ LIODN values "
"didn't match or the 'shared from' DECO's Descriptor "
"required that the SEQ LIODNs be the same and they "
"aren't." },
{ 0x20, "DECO has completed a reset initiated via the DRR "
"register" },
{ 0x21, "Nonce error. When using EKT (CCM) key encryption "
"option in the FIFO STORE Command, the Nonce counter "
"reached its maximum value and this encryption mode "
"can no longer be used." },
{ 0x22, "Meta data is too large (> 511 bytes) for TLS decap "
"(input frame; block ciphers) and IPsec decap (output "
"frame, when doing the next header byte update) and "
"DCRC (output frame)." },
{ 0x80, "DNR (do not run) error" },
{ 0x81, "undefined protocol command" },
{ 0x82, "invalid setting in PDB" },
{ 0x83, "Anti-replay LATE error" },
{ 0x84, "Anti-replay REPLAY error" },
{ 0x85, "Sequence number overflow" },
{ 0x86, "Sigver invalid signature" },
{ 0x87, "DSA Sign Illegal test descriptor" },
{ 0x88, "Protocol Format Error - A protocol has seen an error "
"in the format of data received. When running RSA, "
"this means that formatting with random padding was "
"used, and did not follow the form: 0x00, 0x02, 8-to-N "
"bytes of non-zero pad, 0x00, F data." },
{ 0x89, "Protocol Size Error - A protocol has seen an error in "
"size. When running RSA, pdb size N < (size of F) when "
"no formatting is used; or pdb size N < (F + 11) when "
"formatting is used." },
{ 0xC1, "Blob Command error: Undefined mode" },
{ 0xC2, "Blob Command error: Secure Memory Blob mode error" },
{ 0xC4, "Blob Command error: Black Blob key or input size "
"error" },
{ 0xC5, "Blob Command error: Invalid key destination" },
{ 0xC8, "Blob Command error: Trusted/Secure mode error" },
{ 0xF0, "IPsec TTL or hop limit field either came in as 0, "
"or was decremented to 0" },
{ 0xF1, "3GPP HFN matches or exceeds the Threshold" },
};
u8 desc_error = status & JRSTA_DECOERR_ERROR_MASK;
int i;
report_jump_idx(status, outstr);
for (i = 0; i < ARRAY_SIZE(desc_error_list); i++)
if (desc_error_list[i].value == desc_error)
break;
if (i != ARRAY_SIZE(desc_error_list) && desc_error_list[i].error_text) {
SPRINTFCAT(outstr, "%s", desc_error_list[i].error_text,
strlen(desc_error_list[i].error_text));
} else {
SPRINTFCAT(outstr, "unidentified error value 0x%02x",
desc_error, sizeof("ff"));
}
}
static void report_jr_status(u32 status, char *outstr)
{
SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__));
}
static void report_cond_code_status(u32 status, char *outstr)
{
SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__));
}
char *caam_jr_strstatus(char *outstr, u32 status)
{
struct stat_src {
void (*report_ssed)(u32 status, char *outstr);
char *error;
} status_src[] = {
{ NULL, "No error" },
{ NULL, NULL },
{ report_ccb_status, "CCB" },
{ report_jump_status, "Jump" },
{ report_deco_status, "DECO" },
{ NULL, NULL },
{ report_jr_status, "Job Ring" },
{ report_cond_code_status, "Condition Code" },
};
u32 ssrc = status >> JRSTA_SSRC_SHIFT;
sprintf(outstr, "%s: ", status_src[ssrc].error);
if (status_src[ssrc].report_ssed)
status_src[ssrc].report_ssed(status, outstr);
return outstr;
}
EXPORT_SYMBOL(caam_jr_strstatus);