linux/drivers/media/dvb/firesat/firesat_dvb.c

277 lines
6.5 KiB
C
Raw Normal View History

/*
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
* FireDTV driver (formerly known as FireSAT)
*
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
* Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
* Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*/
#include <linux/errno.h>
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/types.h>
#include <dvb_demux.h>
#include <dvb_frontend.h>
#include <dvbdev.h>
#include "avc_api.h"
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
#include "firesat.h"
#include "firesat-ci.h"
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static struct firesat_channel *firesat_channel_allocate(struct firesat *firesat)
{
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
struct firesat_channel *c = NULL;
int k;
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
if (mutex_lock_interruptible(&firesat->demux_mutex))
return NULL;
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
for (k = 0; k < 16; k++)
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
if (!firesat->channel[k].active) {
firesat->channel[k].active = true;
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
c = &firesat->channel[k];
break;
}
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
mutex_unlock(&firesat->demux_mutex);
return c;
}
static int firesat_channel_collect(struct firesat *firesat, int *pidc, u16 pid[])
{
int k, l = 0;
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
if (mutex_lock_interruptible(&firesat->demux_mutex))
return -EINTR;
for (k = 0; k < 16; k++)
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
if (firesat->channel[k].active)
pid[l++] = firesat->channel[k].pid;
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
mutex_unlock(&firesat->demux_mutex);
*pidc = l;
return 0;
}
static int firesat_channel_release(struct firesat *firesat,
struct firesat_channel *channel)
{
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
if (mutex_lock_interruptible(&firesat->demux_mutex))
return -EINTR;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
channel->active = false;
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
mutex_unlock(&firesat->demux_mutex);
return 0;
}
int firesat_start_feed(struct dvb_demux_feed *dvbdmxfeed)
{
struct firesat *firesat = (struct firesat*)dvbdmxfeed->demux->priv;
struct firesat_channel *channel;
int pidc,k;
u16 pids[16];
switch (dvbdmxfeed->type) {
case DMX_TYPE_TS:
case DMX_TYPE_SEC:
break;
default:
printk(KERN_ERR "%s: invalid type %u\n",
__func__, dvbdmxfeed->type);
return -EINVAL;
}
if (dvbdmxfeed->type == DMX_TYPE_TS) {
switch (dvbdmxfeed->pes_type) {
case DMX_TS_PES_VIDEO:
case DMX_TS_PES_AUDIO:
case DMX_TS_PES_TELETEXT:
case DMX_TS_PES_PCR:
case DMX_TS_PES_OTHER:
//Dirty fix to keep firesat->channel pid-list up to date
for(k=0;k<16;k++){
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
if (!firesat->channel[k].active)
firesat->channel[k].pid =
dvbdmxfeed->pid;
break;
}
channel = firesat_channel_allocate(firesat);
break;
default:
printk(KERN_ERR "%s: invalid pes type %u\n",
__func__, dvbdmxfeed->pes_type);
return -EINVAL;
}
} else {
channel = firesat_channel_allocate(firesat);
}
if (!channel) {
printk(KERN_ERR "%s: busy!\n", __func__);
return -EBUSY;
}
dvbdmxfeed->priv = channel;
channel->pid = dvbdmxfeed->pid;
if (firesat_channel_collect(firesat, &pidc, pids)) {
firesat_channel_release(firesat, channel);
printk(KERN_ERR "%s: could not collect pids!\n", __func__);
return -EINTR;
}
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
if (dvbdmxfeed->pid == 8192) {
k = avc_tuner_get_ts(firesat);
if (k) {
firesat_channel_release(firesat, channel);
printk("%s: AVCTuner_GetTS failed with error %d\n",
__func__, k);
return k;
}
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
} else {
k = avc_tuner_set_pids(firesat, pidc, pids);
if (k) {
firesat_channel_release(firesat, channel);
printk("%s: AVCTuner_SetPIDs failed with error %d\n",
__func__, k);
return k;
}
}
return 0;
}
int firesat_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
{
struct dvb_demux *demux = dvbdmxfeed->demux;
struct firesat *firesat = (struct firesat*)demux->priv;
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
struct firesat_channel *c = dvbdmxfeed->priv;
int k, l;
u16 pids[16];
if (dvbdmxfeed->type == DMX_TYPE_TS && !((dvbdmxfeed->ts_type & TS_PACKET) &&
(demux->dmx.frontend->source != DMX_MEMORY_FE))) {
if (dvbdmxfeed->ts_type & TS_DECODER) {
if (dvbdmxfeed->pes_type >= DMX_TS_PES_OTHER ||
!demux->pesfilter[dvbdmxfeed->pes_type])
return -EINVAL;
demux->pids[dvbdmxfeed->pes_type] |= 0x8000;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
demux->pesfilter[dvbdmxfeed->pes_type] = NULL;
}
if (!(dvbdmxfeed->ts_type & TS_DECODER &&
dvbdmxfeed->pes_type < DMX_TS_PES_OTHER))
return 0;
}
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
if (mutex_lock_interruptible(&firesat->demux_mutex))
return -EINTR;
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
/* list except channel to be removed */
for (k = 0, l = 0; k < 16; k++)
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
if (firesat->channel[k].active) {
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
if (&firesat->channel[k] != c)
pids[l++] = firesat->channel[k].pid;
else
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
firesat->channel[k].active = false;
}
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
k = avc_tuner_set_pids(firesat, l, pids);
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
if (!k)
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
c->active = false;
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-25 22:17:30 +00:00
mutex_unlock(&firesat->demux_mutex);
return k;
}
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
int firesat_dvbdev_init(struct firesat *firesat, struct device *dev)
{
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
int err;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
err = DVB_REGISTER_ADAPTER(&firesat->adapter,
firedtv_model_names[firesat->type],
THIS_MODULE, dev, adapter_nr);
if (err)
goto fail_log;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
/*DMX_TS_FILTERING | DMX_SECTION_FILTERING*/
firesat->demux.dmx.capabilities = 0;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
firesat->demux.priv = (void *)firesat;
firesat->demux.filternum = 16;
firesat->demux.feednum = 16;
firesat->demux.start_feed = firesat_start_feed;
firesat->demux.stop_feed = firesat_stop_feed;
firesat->demux.write_to_decoder = NULL;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
err = dvb_dmx_init(&firesat->demux);
if (err)
goto fail_unreg_adapter;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
firesat->dmxdev.filternum = 16;
firesat->dmxdev.demux = &firesat->demux.dmx;
firesat->dmxdev.capabilities = 0;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
err = dvb_dmxdev_init(&firesat->dmxdev, &firesat->adapter);
if (err)
goto fail_dmx_release;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
firesat->frontend.source = DMX_FRONTEND_0;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
err = firesat->demux.dmx.add_frontend(&firesat->demux.dmx,
&firesat->frontend);
if (err)
goto fail_dmxdev_release;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
err = firesat->demux.dmx.connect_frontend(&firesat->demux.dmx,
&firesat->frontend);
if (err)
goto fail_rem_frontend;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
dvb_net_init(&firesat->adapter, &firesat->dvbnet, &firesat->demux.dmx);
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
firesat_frontend_init(firesat);
err = dvb_register_frontend(&firesat->adapter, &firesat->fe);
if (err)
goto fail_net_release;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
err = firesat_ca_register(firesat);
if (err)
dev_info(dev, "Conditional Access Module not enabled\n");
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
return 0;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 12:45:00 +00:00
fail_net_release:
dvb_net_release(&firesat->dvbnet);
firesat->demux.dmx.close(&firesat->demux.dmx);
fail_rem_frontend:
firesat->demux.dmx.remove_frontend(&firesat->demux.dmx,
&firesat->frontend);
fail_dmxdev_release:
dvb_dmxdev_release(&firesat->dmxdev);
fail_dmx_release:
dvb_dmx_release(&firesat->demux);
fail_unreg_adapter:
dvb_unregister_adapter(&firesat->adapter);
fail_log:
dev_err(dev, "DVB initialization failed\n");
return err;
}