linux/drivers/scsi/qla2xxx/qla_attr.c

1508 lines
39 KiB
C
Raw Normal View History

/*
* QLogic Fibre Channel HBA Driver
* Copyright (c) 2003-2008 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_def.h"
#include <linux/kthread.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
static int qla24xx_vport_disable(struct fc_vport *, bool);
/* SYSFS attributes --------------------------------------------------------- */
static ssize_t
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
qla2x00_sysfs_read_fw_dump(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
if (ha->fw_dump_reading == 0)
return 0;
return memory_read_from_buffer(buf, count, &off, ha->fw_dump,
ha->fw_dump_len);
}
static ssize_t
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
qla2x00_sysfs_write_fw_dump(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
int reading;
if (off != 0)
return (0);
reading = simple_strtol(buf, NULL, 10);
switch (reading) {
case 0:
if (!ha->fw_dump_reading)
break;
qla_printk(KERN_INFO, ha,
"Firmware dump cleared on (%ld).\n", vha->host_no);
ha->fw_dump_reading = 0;
ha->fw_dumped = 0;
break;
case 1:
if (ha->fw_dumped && !ha->fw_dump_reading) {
ha->fw_dump_reading = 1;
qla_printk(KERN_INFO, ha,
"Raw firmware dump ready for read on (%ld).\n",
vha->host_no);
}
break;
case 2:
qla2x00_alloc_fw_dump(vha);
break;
case 3:
qla2x00_system_error(vha);
break;
}
return (count);
}
static struct bin_attribute sysfs_fw_dump_attr = {
.attr = {
.name = "fw_dump",
.mode = S_IRUSR | S_IWUSR,
},
.size = 0,
.read = qla2x00_sysfs_read_fw_dump,
.write = qla2x00_sysfs_write_fw_dump,
};
static ssize_t
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
qla2x00_sysfs_read_nvram(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
if (!capable(CAP_SYS_ADMIN))
return 0;
/* Read NVRAM data from cache. */
return memory_read_from_buffer(buf, count, &off, ha->nvram,
ha->nvram_size);
}
static ssize_t
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
qla2x00_sysfs_write_nvram(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
uint16_t cnt;
if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->nvram_size)
return 0;
/* Checksum NVRAM. */
if (IS_FWI2_CAPABLE(ha)) {
uint32_t *iter;
uint32_t chksum;
iter = (uint32_t *)buf;
chksum = 0;
for (cnt = 0; cnt < ((count >> 2) - 1); cnt++)
chksum += le32_to_cpu(*iter++);
chksum = ~chksum + 1;
*iter = cpu_to_le32(chksum);
} else {
uint8_t *iter;
uint8_t chksum;
iter = (uint8_t *)buf;
chksum = 0;
for (cnt = 0; cnt < count - 1; cnt++)
chksum += *iter++;
chksum = ~chksum + 1;
*iter = chksum;
}
if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha,
"HBA not online, failing NVRAM update.\n");
return -EAGAIN;
}
/* Write NVRAM. */
ha->isp_ops->write_nvram(vha, (uint8_t *)buf, ha->nvram_base, count);
ha->isp_ops->read_nvram(vha, (uint8_t *)ha->nvram, ha->nvram_base,
count);
/* NVRAM settings take effect immediately. */
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
qla2x00_wait_for_chip_reset(vha);
return (count);
}
static struct bin_attribute sysfs_nvram_attr = {
.attr = {
.name = "nvram",
.mode = S_IRUSR | S_IWUSR,
},
.size = 512,
.read = qla2x00_sysfs_read_nvram,
.write = qla2x00_sysfs_write_nvram,
};
static ssize_t
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
qla2x00_sysfs_read_optrom(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
if (ha->optrom_state != QLA_SREADING)
return 0;
return memory_read_from_buffer(buf, count, &off, ha->optrom_buffer,
ha->optrom_region_size);
}
static ssize_t
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
qla2x00_sysfs_write_optrom(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
if (ha->optrom_state != QLA_SWRITING)
return -EINVAL;
if (off > ha->optrom_region_size)
return -ERANGE;
if (off + count > ha->optrom_region_size)
count = ha->optrom_region_size - off;
memcpy(&ha->optrom_buffer[off], buf, count);
return count;
}
static struct bin_attribute sysfs_optrom_attr = {
.attr = {
.name = "optrom",
.mode = S_IRUSR | S_IWUSR,
},
.size = 0,
.read = qla2x00_sysfs_read_optrom,
.write = qla2x00_sysfs_write_optrom,
};
static ssize_t
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
uint32_t start = 0;
uint32_t size = ha->optrom_size;
int val, valid;
if (off)
return 0;
if (sscanf(buf, "%d:%x:%x", &val, &start, &size) < 1)
return -EINVAL;
if (start > ha->optrom_size)
return -EINVAL;
switch (val) {
case 0:
if (ha->optrom_state != QLA_SREADING &&
ha->optrom_state != QLA_SWRITING)
break;
ha->optrom_state = QLA_SWAITING;
DEBUG2(qla_printk(KERN_INFO, ha,
"Freeing flash region allocation -- 0x%x bytes.\n",
ha->optrom_region_size));
vfree(ha->optrom_buffer);
ha->optrom_buffer = NULL;
break;
case 1:
if (ha->optrom_state != QLA_SWAITING)
break;
ha->optrom_region_start = start;
ha->optrom_region_size = start + size > ha->optrom_size ?
ha->optrom_size - start : size;
ha->optrom_state = QLA_SREADING;
ha->optrom_buffer = vmalloc(ha->optrom_region_size);
if (ha->optrom_buffer == NULL) {
qla_printk(KERN_WARNING, ha,
"Unable to allocate memory for optrom retrieval "
"(%x).\n", ha->optrom_region_size);
ha->optrom_state = QLA_SWAITING;
return count;
}
DEBUG2(qla_printk(KERN_INFO, ha,
"Reading flash region -- 0x%x/0x%x.\n",
ha->optrom_region_start, ha->optrom_region_size));
memset(ha->optrom_buffer, 0, ha->optrom_region_size);
ha->isp_ops->read_optrom(vha, ha->optrom_buffer,
ha->optrom_region_start, ha->optrom_region_size);
break;
case 2:
if (ha->optrom_state != QLA_SWAITING)
break;
/*
* We need to be more restrictive on which FLASH regions are
* allowed to be updated via user-space. Regions accessible
* via this method include:
*
* ISP21xx/ISP22xx/ISP23xx type boards:
*
* 0x000000 -> 0x020000 -- Boot code.
*
* ISP2322/ISP24xx type boards:
*
* 0x000000 -> 0x07ffff -- Boot code.
* 0x080000 -> 0x0fffff -- Firmware.
*
* ISP25xx type boards:
*
* 0x000000 -> 0x07ffff -- Boot code.
* 0x080000 -> 0x0fffff -- Firmware.
* 0x120000 -> 0x12ffff -- VPD and HBA parameters.
*/
valid = 0;
if (ha->optrom_size == OPTROM_SIZE_2300 && start == 0)
valid = 1;
else if (start == (ha->flt_region_boot * 4) ||
start == (ha->flt_region_fw * 4))
valid = 1;
else if (IS_QLA25XX(ha) || IS_QLA81XX(ha))
valid = 1;
if (!valid) {
qla_printk(KERN_WARNING, ha,
"Invalid start region 0x%x/0x%x.\n", start, size);
return -EINVAL;
}
ha->optrom_region_start = start;
ha->optrom_region_size = start + size > ha->optrom_size ?
ha->optrom_size - start : size;
ha->optrom_state = QLA_SWRITING;
ha->optrom_buffer = vmalloc(ha->optrom_region_size);
if (ha->optrom_buffer == NULL) {
qla_printk(KERN_WARNING, ha,
"Unable to allocate memory for optrom update "
"(%x).\n", ha->optrom_region_size);
ha->optrom_state = QLA_SWAITING;
return count;
}
DEBUG2(qla_printk(KERN_INFO, ha,
"Staging flash region write -- 0x%x/0x%x.\n",
ha->optrom_region_start, ha->optrom_region_size));
memset(ha->optrom_buffer, 0, ha->optrom_region_size);
break;
case 3:
if (ha->optrom_state != QLA_SWRITING)
break;
if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha,
"HBA not online, failing flash update.\n");
return -EAGAIN;
}
DEBUG2(qla_printk(KERN_INFO, ha,
"Writing flash region -- 0x%x/0x%x.\n",
ha->optrom_region_start, ha->optrom_region_size));
ha->isp_ops->write_optrom(vha, ha->optrom_buffer,
ha->optrom_region_start, ha->optrom_region_size);
break;
default:
count = -EINVAL;
}
return count;
}
static struct bin_attribute sysfs_optrom_ctl_attr = {
.attr = {
.name = "optrom_ctl",
.mode = S_IWUSR,
},
.size = 0,
.write = qla2x00_sysfs_write_optrom_ctl,
};
static ssize_t
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
qla2x00_sysfs_read_vpd(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
if (!capable(CAP_SYS_ADMIN))
return 0;
/* Read NVRAM data from cache. */
return memory_read_from_buffer(buf, count, &off, ha->vpd, ha->vpd_size);
}
static ssize_t
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
qla2x00_sysfs_write_vpd(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->vpd_size)
return 0;
if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha,
"HBA not online, failing VPD update.\n");
return -EAGAIN;
}
/* Write NVRAM. */
ha->isp_ops->write_nvram(vha, (uint8_t *)buf, ha->vpd_base, count);
ha->isp_ops->read_nvram(vha, (uint8_t *)ha->vpd, ha->vpd_base, count);
return count;
}
static struct bin_attribute sysfs_vpd_attr = {
.attr = {
.name = "vpd",
.mode = S_IRUSR | S_IWUSR,
},
.size = 0,
.read = qla2x00_sysfs_read_vpd,
.write = qla2x00_sysfs_write_vpd,
};
static ssize_t
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
qla2x00_sysfs_read_sfp(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
uint16_t iter, addr, offset;
int rval;
if (!capable(CAP_SYS_ADMIN) || off != 0 || count != SFP_DEV_SIZE * 2)
return 0;
if (ha->sfp_data)
goto do_read;
ha->sfp_data = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
&ha->sfp_data_dma);
if (!ha->sfp_data) {
qla_printk(KERN_WARNING, ha,
"Unable to allocate memory for SFP read-data.\n");
return 0;
}
do_read:
memset(ha->sfp_data, 0, SFP_BLOCK_SIZE);
addr = 0xa0;
for (iter = 0, offset = 0; iter < (SFP_DEV_SIZE * 2) / SFP_BLOCK_SIZE;
iter++, offset += SFP_BLOCK_SIZE) {
if (iter == 4) {
/* Skip to next device address. */
addr = 0xa2;
offset = 0;
}
rval = qla2x00_read_sfp(vha, ha->sfp_data_dma, addr, offset,
SFP_BLOCK_SIZE);
if (rval != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha,
"Unable to read SFP data (%x/%x/%x).\n", rval,
addr, offset);
count = 0;
break;
}
memcpy(buf, ha->sfp_data, SFP_BLOCK_SIZE);
buf += SFP_BLOCK_SIZE;
}
return count;
}
static struct bin_attribute sysfs_sfp_attr = {
.attr = {
.name = "sfp",
.mode = S_IRUSR | S_IWUSR,
},
.size = SFP_DEV_SIZE * 2,
.read = qla2x00_sysfs_read_sfp,
};
static ssize_t
qla2x00_sysfs_write_reset(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
int type;
if (off != 0)
return 0;
type = simple_strtol(buf, NULL, 10);
switch (type) {
case 0x2025c:
qla_printk(KERN_INFO, ha,
"Issuing ISP reset on (%ld).\n", vha->host_no);
scsi_block_requests(vha->host);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
qla2x00_wait_for_chip_reset(vha);
scsi_unblock_requests(vha->host);
break;
case 0x2025d:
if (!IS_QLA81XX(ha))
break;
qla_printk(KERN_INFO, ha,
"Issuing MPI reset on (%ld).\n", vha->host_no);
/* Make sure FC side is not in reset */
qla2x00_wait_for_hba_online(vha);
/* Issue MPI reset */
scsi_block_requests(vha->host);
if (qla81xx_restart_mpi_firmware(vha) != QLA_SUCCESS)
qla_printk(KERN_WARNING, ha,
"MPI reset failed on (%ld).\n", vha->host_no);
scsi_unblock_requests(vha->host);
break;
}
return count;
}
static struct bin_attribute sysfs_reset_attr = {
.attr = {
.name = "reset",
.mode = S_IWUSR,
},
.size = 0,
.write = qla2x00_sysfs_write_reset,
};
static struct sysfs_entry {
char *name;
struct bin_attribute *attr;
int is4GBp_only;
} bin_file_entries[] = {
{ "fw_dump", &sysfs_fw_dump_attr, },
{ "nvram", &sysfs_nvram_attr, },
{ "optrom", &sysfs_optrom_attr, },
{ "optrom_ctl", &sysfs_optrom_ctl_attr, },
{ "vpd", &sysfs_vpd_attr, 1 },
{ "sfp", &sysfs_sfp_attr, 1 },
{ "reset", &sysfs_reset_attr, },
{ NULL },
};
void
qla2x00_alloc_sysfs_attr(scsi_qla_host_t *vha)
{
struct Scsi_Host *host = vha->host;
struct sysfs_entry *iter;
int ret;
for (iter = bin_file_entries; iter->name; iter++) {
if (iter->is4GBp_only && !IS_FWI2_CAPABLE(vha->hw))
continue;
ret = sysfs_create_bin_file(&host->shost_gendev.kobj,
iter->attr);
if (ret)
qla_printk(KERN_INFO, vha->hw,
"Unable to create sysfs %s binary attribute "
"(%d).\n", iter->name, ret);
}
}
void
qla2x00_free_sysfs_attr(scsi_qla_host_t *vha)
{
struct Scsi_Host *host = vha->host;
struct sysfs_entry *iter;
struct qla_hw_data *ha = vha->hw;
for (iter = bin_file_entries; iter->name; iter++) {
if (iter->is4GBp_only && !IS_FWI2_CAPABLE(ha))
continue;
sysfs_remove_bin_file(&host->shost_gendev.kobj,
iter->attr);
}
if (ha->beacon_blink_led == 1)
ha->isp_ops->beacon_off(vha);
}
/* Scsi_Host attributes. */
static ssize_t
qla2x00_drvr_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%s\n", qla2x00_version_str);
}
static ssize_t
qla2x00_fw_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
struct qla_hw_data *ha = vha->hw;
char fw_str[128];
return snprintf(buf, PAGE_SIZE, "%s\n",
ha->isp_ops->fw_version_str(vha, fw_str));
}
static ssize_t
qla2x00_serial_num_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
struct qla_hw_data *ha = vha->hw;
uint32_t sn;
if (IS_FWI2_CAPABLE(ha)) {
qla2xxx_get_vpd_field(vha, "SN", buf, PAGE_SIZE);
return snprintf(buf, PAGE_SIZE, "%s\n", buf);
}
sn = ((ha->serial0 & 0x1f) << 16) | (ha->serial2 << 8) | ha->serial1;
return snprintf(buf, PAGE_SIZE, "%c%05d\n", 'A' + sn / 100000,
sn % 100000);
}
static ssize_t
qla2x00_isp_name_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
return snprintf(buf, PAGE_SIZE, "ISP%04X\n", vha->hw->pdev->device);
}
static ssize_t
qla2x00_isp_id_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
struct qla_hw_data *ha = vha->hw;
return snprintf(buf, PAGE_SIZE, "%04x %04x %04x %04x\n",
ha->product_id[0], ha->product_id[1], ha->product_id[2],
ha->product_id[3]);
}
static ssize_t
qla2x00_model_name_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
return snprintf(buf, PAGE_SIZE, "%s\n", vha->hw->model_number);
}
static ssize_t
qla2x00_model_desc_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
return snprintf(buf, PAGE_SIZE, "%s\n",
vha->hw->model_desc ? vha->hw->model_desc : "");
}
static ssize_t
qla2x00_pci_info_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
char pci_info[30];
return snprintf(buf, PAGE_SIZE, "%s\n",
vha->hw->isp_ops->pci_info_str(vha, pci_info));
}
static ssize_t
qla2x00_link_state_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
struct qla_hw_data *ha = vha->hw;
int len = 0;
if (atomic_read(&vha->loop_state) == LOOP_DOWN ||
atomic_read(&vha->loop_state) == LOOP_DEAD)
len = snprintf(buf, PAGE_SIZE, "Link Down\n");
else if (atomic_read(&vha->loop_state) != LOOP_READY ||
test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
len = snprintf(buf, PAGE_SIZE, "Unknown Link State\n");
else {
len = snprintf(buf, PAGE_SIZE, "Link Up - ");
switch (ha->current_topology) {
case ISP_CFG_NL:
len += snprintf(buf + len, PAGE_SIZE-len, "Loop\n");
break;
case ISP_CFG_FL:
len += snprintf(buf + len, PAGE_SIZE-len, "FL_Port\n");
break;
case ISP_CFG_N:
len += snprintf(buf + len, PAGE_SIZE-len,
"N_Port to N_Port\n");
break;
case ISP_CFG_F:
len += snprintf(buf + len, PAGE_SIZE-len, "F_Port\n");
break;
default:
len += snprintf(buf + len, PAGE_SIZE-len, "Loop\n");
break;
}
}
return len;
}
static ssize_t
qla2x00_zio_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
int len = 0;
switch (vha->hw->zio_mode) {
case QLA_ZIO_MODE_6:
len += snprintf(buf + len, PAGE_SIZE-len, "Mode 6\n");
break;
case QLA_ZIO_DISABLED:
len += snprintf(buf + len, PAGE_SIZE-len, "Disabled\n");
break;
}
return len;
}
static ssize_t
qla2x00_zio_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
struct qla_hw_data *ha = vha->hw;
int val = 0;
uint16_t zio_mode;
if (!IS_ZIO_SUPPORTED(ha))
return -ENOTSUPP;
if (sscanf(buf, "%d", &val) != 1)
return -EINVAL;
if (val)
zio_mode = QLA_ZIO_MODE_6;
else
zio_mode = QLA_ZIO_DISABLED;
/* Update per-hba values and queue a reset. */
if (zio_mode != QLA_ZIO_DISABLED || ha->zio_mode != QLA_ZIO_DISABLED) {
ha->zio_mode = zio_mode;
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
}
return strlen(buf);
}
static ssize_t
qla2x00_zio_timer_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
return snprintf(buf, PAGE_SIZE, "%d us\n", vha->hw->zio_timer * 100);
}
static ssize_t
qla2x00_zio_timer_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
int val = 0;
uint16_t zio_timer;
if (sscanf(buf, "%d", &val) != 1)
return -EINVAL;
if (val > 25500 || val < 100)
return -ERANGE;
zio_timer = (uint16_t)(val / 100);
vha->hw->zio_timer = zio_timer;
return strlen(buf);
}
static ssize_t
qla2x00_beacon_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
int len = 0;
if (vha->hw->beacon_blink_led)
len += snprintf(buf + len, PAGE_SIZE-len, "Enabled\n");
else
len += snprintf(buf + len, PAGE_SIZE-len, "Disabled\n");
return len;
}
static ssize_t
qla2x00_beacon_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
struct qla_hw_data *ha = vha->hw;
int val = 0;
int rval;
if (IS_QLA2100(ha) || IS_QLA2200(ha))
return -EPERM;
if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) {
qla_printk(KERN_WARNING, ha,
"Abort ISP active -- ignoring beacon request.\n");
return -EBUSY;
}
if (sscanf(buf, "%d", &val) != 1)
return -EINVAL;
if (val)
rval = ha->isp_ops->beacon_on(vha);
else
rval = ha->isp_ops->beacon_off(vha);
if (rval != QLA_SUCCESS)
count = 0;
return count;
}
static ssize_t
qla2x00_optrom_bios_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
struct qla_hw_data *ha = vha->hw;
return snprintf(buf, PAGE_SIZE, "%d.%02d\n", ha->bios_revision[1],
ha->bios_revision[0]);
}
static ssize_t
qla2x00_optrom_efi_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
struct qla_hw_data *ha = vha->hw;
return snprintf(buf, PAGE_SIZE, "%d.%02d\n", ha->efi_revision[1],
ha->efi_revision[0]);
}
static ssize_t
qla2x00_optrom_fcode_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
struct qla_hw_data *ha = vha->hw;
return snprintf(buf, PAGE_SIZE, "%d.%02d\n", ha->fcode_revision[1],
ha->fcode_revision[0]);
}
static ssize_t
qla2x00_optrom_fw_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
struct qla_hw_data *ha = vha->hw;
return snprintf(buf, PAGE_SIZE, "%d.%02d.%02d %d\n",
ha->fw_revision[0], ha->fw_revision[1], ha->fw_revision[2],
ha->fw_revision[3]);
}
static ssize_t
qla2x00_total_isp_aborts_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
struct qla_hw_data *ha = vha->hw;
return snprintf(buf, PAGE_SIZE, "%d\n",
ha->qla_stats.total_isp_aborts);
}
static ssize_t
qla2x00_mpi_version_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
struct qla_hw_data *ha = vha->hw;
if (!IS_QLA81XX(ha))
return snprintf(buf, PAGE_SIZE, "\n");
return snprintf(buf, PAGE_SIZE, "%d.%02d.%02d (%x)\n",
ha->mpi_version[0], ha->mpi_version[1], ha->mpi_version[2],
ha->mpi_capabilities);
}
static ssize_t
qla2x00_phy_version_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
struct qla_hw_data *ha = vha->hw;
if (!IS_QLA81XX(ha))
return snprintf(buf, PAGE_SIZE, "\n");
return snprintf(buf, PAGE_SIZE, "%d.%02d.%02d\n",
ha->phy_version[0], ha->phy_version[1], ha->phy_version[2]);
}
static DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_drvr_version_show, NULL);
static DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL);
static DEVICE_ATTR(serial_num, S_IRUGO, qla2x00_serial_num_show, NULL);
static DEVICE_ATTR(isp_name, S_IRUGO, qla2x00_isp_name_show, NULL);
static DEVICE_ATTR(isp_id, S_IRUGO, qla2x00_isp_id_show, NULL);
static DEVICE_ATTR(model_name, S_IRUGO, qla2x00_model_name_show, NULL);
static DEVICE_ATTR(model_desc, S_IRUGO, qla2x00_model_desc_show, NULL);
static DEVICE_ATTR(pci_info, S_IRUGO, qla2x00_pci_info_show, NULL);
static DEVICE_ATTR(link_state, S_IRUGO, qla2x00_link_state_show, NULL);
static DEVICE_ATTR(zio, S_IRUGO | S_IWUSR, qla2x00_zio_show, qla2x00_zio_store);
static DEVICE_ATTR(zio_timer, S_IRUGO | S_IWUSR, qla2x00_zio_timer_show,
qla2x00_zio_timer_store);
static DEVICE_ATTR(beacon, S_IRUGO | S_IWUSR, qla2x00_beacon_show,
qla2x00_beacon_store);
static DEVICE_ATTR(optrom_bios_version, S_IRUGO,
qla2x00_optrom_bios_version_show, NULL);
static DEVICE_ATTR(optrom_efi_version, S_IRUGO,
qla2x00_optrom_efi_version_show, NULL);
static DEVICE_ATTR(optrom_fcode_version, S_IRUGO,
qla2x00_optrom_fcode_version_show, NULL);
static DEVICE_ATTR(optrom_fw_version, S_IRUGO, qla2x00_optrom_fw_version_show,
NULL);
static DEVICE_ATTR(total_isp_aborts, S_IRUGO, qla2x00_total_isp_aborts_show,
NULL);
static DEVICE_ATTR(mpi_version, S_IRUGO, qla2x00_mpi_version_show, NULL);
static DEVICE_ATTR(phy_version, S_IRUGO, qla2x00_phy_version_show, NULL);
struct device_attribute *qla2x00_host_attrs[] = {
&dev_attr_driver_version,
&dev_attr_fw_version,
&dev_attr_serial_num,
&dev_attr_isp_name,
&dev_attr_isp_id,
&dev_attr_model_name,
&dev_attr_model_desc,
&dev_attr_pci_info,
&dev_attr_link_state,
&dev_attr_zio,
&dev_attr_zio_timer,
&dev_attr_beacon,
&dev_attr_optrom_bios_version,
&dev_attr_optrom_efi_version,
&dev_attr_optrom_fcode_version,
&dev_attr_optrom_fw_version,
&dev_attr_total_isp_aborts,
&dev_attr_mpi_version,
&dev_attr_phy_version,
NULL,
};
/* Host attributes. */
static void
qla2x00_get_host_port_id(struct Scsi_Host *shost)
{
scsi_qla_host_t *vha = shost_priv(shost);
fc_host_port_id(shost) = vha->d_id.b.domain << 16 |
vha->d_id.b.area << 8 | vha->d_id.b.al_pa;
}
static void
qla2x00_get_host_speed(struct Scsi_Host *shost)
{
struct qla_hw_data *ha = ((struct scsi_qla_host *)
(shost_priv(shost)))->hw;
u32 speed = FC_PORTSPEED_UNKNOWN;
switch (ha->link_data_rate) {
case PORT_SPEED_1GB:
speed = FC_PORTSPEED_1GBIT;
break;
case PORT_SPEED_2GB:
speed = FC_PORTSPEED_2GBIT;
break;
case PORT_SPEED_4GB:
speed = FC_PORTSPEED_4GBIT;
break;
case PORT_SPEED_8GB:
speed = FC_PORTSPEED_8GBIT;
break;
case PORT_SPEED_10GB:
speed = FC_PORTSPEED_10GBIT;
break;
}
fc_host_speed(shost) = speed;
}
static void
qla2x00_get_host_port_type(struct Scsi_Host *shost)
{
scsi_qla_host_t *vha = shost_priv(shost);
uint32_t port_type = FC_PORTTYPE_UNKNOWN;
if (vha->vp_idx) {
fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
return;
}
switch (vha->hw->current_topology) {
case ISP_CFG_NL:
port_type = FC_PORTTYPE_LPORT;
break;
case ISP_CFG_FL:
port_type = FC_PORTTYPE_NLPORT;
break;
case ISP_CFG_N:
port_type = FC_PORTTYPE_PTP;
break;
case ISP_CFG_F:
port_type = FC_PORTTYPE_NPORT;
break;
}
fc_host_port_type(shost) = port_type;
}
static void
qla2x00_get_starget_node_name(struct scsi_target *starget)
{
struct Scsi_Host *host = dev_to_shost(starget->dev.parent);
scsi_qla_host_t *vha = shost_priv(host);
fc_port_t *fcport;
u64 node_name = 0;
list_for_each_entry(fcport, &vha->vp_fcports, list) {
if (fcport->rport &&
starget->id == fcport->rport->scsi_target_id) {
node_name = wwn_to_u64(fcport->node_name);
break;
}
}
fc_starget_node_name(starget) = node_name;
}
static void
qla2x00_get_starget_port_name(struct scsi_target *starget)
{
struct Scsi_Host *host = dev_to_shost(starget->dev.parent);
scsi_qla_host_t *vha = shost_priv(host);
fc_port_t *fcport;
u64 port_name = 0;
list_for_each_entry(fcport, &vha->vp_fcports, list) {
if (fcport->rport &&
starget->id == fcport->rport->scsi_target_id) {
port_name = wwn_to_u64(fcport->port_name);
break;
}
}
fc_starget_port_name(starget) = port_name;
}
static void
qla2x00_get_starget_port_id(struct scsi_target *starget)
{
struct Scsi_Host *host = dev_to_shost(starget->dev.parent);
scsi_qla_host_t *vha = shost_priv(host);
fc_port_t *fcport;
uint32_t port_id = ~0U;
list_for_each_entry(fcport, &vha->vp_fcports, list) {
if (fcport->rport &&
starget->id == fcport->rport->scsi_target_id) {
port_id = fcport->d_id.b.domain << 16 |
fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa;
break;
}
}
fc_starget_port_id(starget) = port_id;
}
static void
qla2x00_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
{
if (timeout)
rport->dev_loss_tmo = timeout;
else
rport->dev_loss_tmo = 1;
}
static void
qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport)
{
struct Scsi_Host *host = rport_to_shost(rport);
fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
if (!fcport)
return;
qla2x00_abort_fcport_cmds(fcport);
/*
* Transport has effectively 'deleted' the rport, clear
* all local references.
*/
spin_lock_irq(host->host_lock);
fcport->rport = NULL;
*((fc_port_t **)rport->dd_data) = NULL;
spin_unlock_irq(host->host_lock);
}
static void
qla2x00_terminate_rport_io(struct fc_rport *rport)
{
fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
if (!fcport)
return;
/*
* At this point all fcport's software-states are cleared. Perform any
* final cleanup of firmware resources (PCBs and XCBs).
*/
if (fcport->loop_id != FC_NO_LOOP_ID)
fcport->vha->hw->isp_ops->fabric_logout(fcport->vha,
fcport->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa);
qla2x00_abort_fcport_cmds(fcport);
}
static int
qla2x00_issue_lip(struct Scsi_Host *shost)
{
scsi_qla_host_t *vha = shost_priv(shost);
qla2x00_loop_reset(vha);
return 0;
}
static struct fc_host_statistics *
qla2x00_get_fc_host_stats(struct Scsi_Host *shost)
{
scsi_qla_host_t *vha = shost_priv(shost);
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
int rval;
struct link_statistics *stats;
dma_addr_t stats_dma;
struct fc_host_statistics *pfc_host_stat;
pfc_host_stat = &ha->fc_host_stat;
memset(pfc_host_stat, -1, sizeof(struct fc_host_statistics));
stats = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &stats_dma);
if (stats == NULL) {
DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n",
__func__, base_vha->host_no));
goto done;
}
memset(stats, 0, DMA_POOL_SIZE);
rval = QLA_FUNCTION_FAILED;
if (IS_FWI2_CAPABLE(ha)) {
rval = qla24xx_get_isp_stats(base_vha, stats, stats_dma);
} else if (atomic_read(&base_vha->loop_state) == LOOP_READY &&
!test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) &&
!test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) &&
!ha->dpc_active) {
/* Must be in a 'READY' state for statistics retrieval. */
rval = qla2x00_get_link_status(base_vha, base_vha->loop_id,
stats, stats_dma);
}
if (rval != QLA_SUCCESS)
goto done_free;
pfc_host_stat->link_failure_count = stats->link_fail_cnt;
pfc_host_stat->loss_of_sync_count = stats->loss_sync_cnt;
pfc_host_stat->loss_of_signal_count = stats->loss_sig_cnt;
pfc_host_stat->prim_seq_protocol_err_count = stats->prim_seq_err_cnt;
pfc_host_stat->invalid_tx_word_count = stats->inval_xmit_word_cnt;
pfc_host_stat->invalid_crc_count = stats->inval_crc_cnt;
if (IS_FWI2_CAPABLE(ha)) {
pfc_host_stat->lip_count = stats->lip_cnt;
pfc_host_stat->tx_frames = stats->tx_frames;
pfc_host_stat->rx_frames = stats->rx_frames;
pfc_host_stat->dumped_frames = stats->dumped_frames;
pfc_host_stat->nos_count = stats->nos_rcvd;
}
pfc_host_stat->fcp_input_megabytes = ha->qla_stats.input_bytes >> 20;
pfc_host_stat->fcp_output_megabytes = ha->qla_stats.output_bytes >> 20;
done_free:
dma_pool_free(ha->s_dma_pool, stats, stats_dma);
done:
return pfc_host_stat;
}
static void
qla2x00_get_host_symbolic_name(struct Scsi_Host *shost)
{
scsi_qla_host_t *vha = shost_priv(shost);
qla2x00_get_sym_node_name(vha, fc_host_symbolic_name(shost));
}
static void
qla2x00_set_host_system_hostname(struct Scsi_Host *shost)
{
scsi_qla_host_t *vha = shost_priv(shost);
set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
}
static void
qla2x00_get_host_fabric_name(struct Scsi_Host *shost)
{
scsi_qla_host_t *vha = shost_priv(shost);
u64 node_name;
if (vha->device_flags & SWITCH_FOUND)
node_name = wwn_to_u64(vha->fabric_node_name);
else
node_name = wwn_to_u64(vha->node_name);
fc_host_fabric_name(shost) = node_name;
}
static void
qla2x00_get_host_port_state(struct Scsi_Host *shost)
{
scsi_qla_host_t *vha = shost_priv(shost);
struct scsi_qla_host *base_vha = pci_get_drvdata(vha->hw->pdev);
if (!base_vha->flags.online)
fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE;
else if (atomic_read(&base_vha->loop_state) == LOOP_TIMEOUT)
fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
else
fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
}
static int
qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
{
int ret = 0;
int cnt = 0;
uint8_t qos = QLA_DEFAULT_QUE_QOS;
scsi_qla_host_t *base_vha = shost_priv(fc_vport->shost);
scsi_qla_host_t *vha = NULL;
struct qla_hw_data *ha = base_vha->hw;
ret = qla24xx_vport_create_req_sanity_check(fc_vport);
if (ret) {
DEBUG15(printk("qla24xx_vport_create_req_sanity_check failed, "
"status %x\n", ret));
return (ret);
}
vha = qla24xx_create_vhost(fc_vport);
if (vha == NULL) {
DEBUG15(printk ("qla24xx_create_vhost failed, vha = %p\n",
vha));
return FC_VPORT_FAILED;
}
if (disable) {
atomic_set(&vha->vp_state, VP_OFFLINE);
fc_vport_set_state(fc_vport, FC_VPORT_DISABLED);
} else
atomic_set(&vha->vp_state, VP_FAILED);
/* ready to create vport */
qla_printk(KERN_INFO, vha->hw, "VP entry id %d assigned.\n",
vha->vp_idx);
/* initialized vport states */
atomic_set(&vha->loop_state, LOOP_DOWN);
vha->vp_err_state= VP_ERR_PORTDWN;
vha->vp_prev_err_state= VP_ERR_UNKWN;
/* Check if physical ha port is Up */
if (atomic_read(&base_vha->loop_state) == LOOP_DOWN ||
atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
/* Don't retry or attempt login of this virtual port */
DEBUG15(printk ("scsi(%ld): pport loop_state is not UP.\n",
base_vha->host_no));
atomic_set(&vha->loop_state, LOOP_DEAD);
if (!disable)
fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN);
}
if (scsi_add_host(vha->host, &fc_vport->dev)) {
DEBUG15(printk("scsi(%ld): scsi_add_host failure for VP[%d].\n",
vha->host_no, vha->vp_idx));
goto vport_create_failed_2;
}
/* initialize attributes */
fc_host_node_name(vha->host) = wwn_to_u64(vha->node_name);
fc_host_port_name(vha->host) = wwn_to_u64(vha->port_name);
fc_host_supported_classes(vha->host) =
fc_host_supported_classes(base_vha->host);
fc_host_supported_speeds(vha->host) =
fc_host_supported_speeds(base_vha->host);
qla24xx_vport_disable(fc_vport, disable);
/* Create a queue pair for the vport */
if (ha->mqenable) {
if (ha->npiv_info) {
for (; cnt < ha->nvram_npiv_size; cnt++) {
if (ha->npiv_info[cnt].port_name ==
vha->port_name &&
ha->npiv_info[cnt].node_name ==
vha->node_name) {
qos = ha->npiv_info[cnt].q_qos;
break;
}
}
}
qla25xx_create_queues(vha, qos);
}
return 0;
vport_create_failed_2:
qla24xx_disable_vp(vha);
qla24xx_deallocate_vp_id(vha);
scsi_host_put(vha->host);
return FC_VPORT_FAILED;
}
static int
qla24xx_vport_delete(struct fc_vport *fc_vport)
{
scsi_qla_host_t *vha = fc_vport->dd_data;
fc_port_t *fcport, *tfcport;
struct qla_hw_data *ha = vha->hw;
uint16_t id = vha->vp_idx;
while (test_bit(LOOP_RESYNC_ACTIVE, &vha->dpc_flags) ||
test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags))
msleep(1000);
qla24xx_disable_vp(vha);
fc_remove_host(vha->host);
scsi_remove_host(vha->host);
list_for_each_entry_safe(fcport, tfcport, &vha->vp_fcports, list) {
list_del(&fcport->list);
kfree(fcport);
fcport = NULL;
}
qla24xx_deallocate_vp_id(vha);
if (vha->timer_active) {
qla2x00_vp_stop_timer(vha);
DEBUG15(printk ("scsi(%ld): timer for the vport[%d] = %p "
"has stopped\n",
vha->host_no, vha->vp_idx, vha));
}
if (ha->mqenable) {
if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS)
qla_printk(KERN_WARNING, ha,
"Queue delete failed.\n");
}
scsi_host_put(vha->host);
qla_printk(KERN_INFO, ha, "vport %d deleted\n", id);
return 0;
}
static int
qla24xx_vport_disable(struct fc_vport *fc_vport, bool disable)
{
scsi_qla_host_t *vha = fc_vport->dd_data;
if (disable)
qla24xx_disable_vp(vha);
else
qla24xx_enable_vp(vha);
return 0;
}
struct fc_function_template qla2xxx_transport_functions = {
.show_host_node_name = 1,
.show_host_port_name = 1,
.show_host_supported_classes = 1,
.show_host_supported_speeds = 1,
.get_host_port_id = qla2x00_get_host_port_id,
.show_host_port_id = 1,
.get_host_speed = qla2x00_get_host_speed,
.show_host_speed = 1,
.get_host_port_type = qla2x00_get_host_port_type,
.show_host_port_type = 1,
.get_host_symbolic_name = qla2x00_get_host_symbolic_name,
.show_host_symbolic_name = 1,
.set_host_system_hostname = qla2x00_set_host_system_hostname,
.show_host_system_hostname = 1,
.get_host_fabric_name = qla2x00_get_host_fabric_name,
.show_host_fabric_name = 1,
.get_host_port_state = qla2x00_get_host_port_state,
.show_host_port_state = 1,
.dd_fcrport_size = sizeof(struct fc_port *),
.show_rport_supported_classes = 1,
.get_starget_node_name = qla2x00_get_starget_node_name,
.show_starget_node_name = 1,
.get_starget_port_name = qla2x00_get_starget_port_name,
.show_starget_port_name = 1,
.get_starget_port_id = qla2x00_get_starget_port_id,
.show_starget_port_id = 1,
.set_rport_dev_loss_tmo = qla2x00_set_rport_loss_tmo,
.show_rport_dev_loss_tmo = 1,
.issue_fc_host_lip = qla2x00_issue_lip,
.dev_loss_tmo_callbk = qla2x00_dev_loss_tmo_callbk,
.terminate_rport_io = qla2x00_terminate_rport_io,
.get_fc_host_stats = qla2x00_get_fc_host_stats,
.vport_create = qla24xx_vport_create,
.vport_disable = qla24xx_vport_disable,
.vport_delete = qla24xx_vport_delete,
};
struct fc_function_template qla2xxx_transport_vport_functions = {
.show_host_node_name = 1,
.show_host_port_name = 1,
.show_host_supported_classes = 1,
.get_host_port_id = qla2x00_get_host_port_id,
.show_host_port_id = 1,
.get_host_speed = qla2x00_get_host_speed,
.show_host_speed = 1,
.get_host_port_type = qla2x00_get_host_port_type,
.show_host_port_type = 1,
.get_host_symbolic_name = qla2x00_get_host_symbolic_name,
.show_host_symbolic_name = 1,
.set_host_system_hostname = qla2x00_set_host_system_hostname,
.show_host_system_hostname = 1,
.get_host_fabric_name = qla2x00_get_host_fabric_name,
.show_host_fabric_name = 1,
.get_host_port_state = qla2x00_get_host_port_state,
.show_host_port_state = 1,
.dd_fcrport_size = sizeof(struct fc_port *),
.show_rport_supported_classes = 1,
.get_starget_node_name = qla2x00_get_starget_node_name,
.show_starget_node_name = 1,
.get_starget_port_name = qla2x00_get_starget_port_name,
.show_starget_port_name = 1,
.get_starget_port_id = qla2x00_get_starget_port_id,
.show_starget_port_id = 1,
.set_rport_dev_loss_tmo = qla2x00_set_rport_loss_tmo,
.show_rport_dev_loss_tmo = 1,
.issue_fc_host_lip = qla2x00_issue_lip,
.dev_loss_tmo_callbk = qla2x00_dev_loss_tmo_callbk,
.terminate_rport_io = qla2x00_terminate_rport_io,
.get_fc_host_stats = qla2x00_get_fc_host_stats,
};
void
qla2x00_init_host_attr(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
u32 speed = FC_PORTSPEED_UNKNOWN;
fc_host_node_name(vha->host) = wwn_to_u64(vha->node_name);
fc_host_port_name(vha->host) = wwn_to_u64(vha->port_name);
fc_host_supported_classes(vha->host) = FC_COS_CLASS3;
fc_host_max_npiv_vports(vha->host) = ha->max_npiv_vports;
fc_host_npiv_vports_inuse(vha->host) = ha->cur_vport_count;
if (IS_QLA81XX(ha))
speed = FC_PORTSPEED_10GBIT;
else if (IS_QLA25XX(ha))
speed = FC_PORTSPEED_8GBIT | FC_PORTSPEED_4GBIT |
FC_PORTSPEED_2GBIT | FC_PORTSPEED_1GBIT;
else if (IS_QLA24XX_TYPE(ha))
speed = FC_PORTSPEED_4GBIT | FC_PORTSPEED_2GBIT |
FC_PORTSPEED_1GBIT;
else if (IS_QLA23XX(ha))
speed = FC_PORTSPEED_2GBIT | FC_PORTSPEED_1GBIT;
else
speed = FC_PORTSPEED_1GBIT;
fc_host_supported_speeds(vha->host) = speed;
}