q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/arch/arm/configs/ixp4xx_defconfig

1592 lines
37 KiB
Text
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Automatically generated make config: don't edit
[ARM] 4806/1: ixp4xx: Ethernet support for the nslu2 and nas100d boards Enables the new ixp4xx qmgr and npe drivers in ixp4xx_defconfig. Sets up the corresponding platform data for the nslu2 and nas100d boards, and reads the ethernet MAC address from the internal flash. Tested on both little-endian and big-endian kernels. Tested-by: Tom King <tom@websb.net> Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Michael Westerhof <mwester@dls.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-01 23:04:05 +00:00
# Linux kernel version: 2.6.24
# Sun Jan 27 07:33:38 2008
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
CONFIG_ARM=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_MMU=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_RWSEM_GENERIC_SPINLOCK=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_GENERIC_CALIBRATE_DELAY=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_ZONE_DMA=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# General setup
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_INIT_ENV_ARG_LIMIT=32
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_LOCALVERSION=""
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_LOCALVERSION_AUTO=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_SYSVIPC_SYSCTL=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_INITRAMFS_SOURCE=""
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_SYSCTL=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_EMBEDDED=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_HOTPLUG=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_PRINTK=y
CONFIG_BUG=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_ELF_CORE=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_ANON_INODES=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_EPOLL=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_SHMEM=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# System Type
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_ARCH_EP93XX is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_ARCH_FOOTBRIDGE is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_ARCH_IXP2000 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_ARCH_IXP4XX=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_ARCH_L7200 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_PNX4008 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_ARCH_DAVINCI is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_ARCH_OMAP is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
# Intel IXP4xx Implementation Options
#
#
# IXP4xx Platforms
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_MACH_NSLU2=y
CONFIG_MACH_AVILA=y
CONFIG_MACH_LOFT=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_ARCH_ADI_COYOTE=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_MACH_GATEWAY7001=y
CONFIG_MACH_WG302V2=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_ARCH_IXDP425=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_MACH_IXDPG425=y
CONFIG_MACH_IXDP465=y
[ARM] 4311/1: ixp4xx: add KIXRP435 platform Add Intel KIXRP435 Reference Platform based on IXP43x processor. Fixed after review : access to cp15 removed in identification functions, used access to global processor_id instead Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: Ruslan Sushko <rsushko@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-06 14:00:31 +00:00
CONFIG_MACH_KIXRP435=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_ARCH_IXCDP1100=y
CONFIG_ARCH_PRPMC1100=y
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
CONFIG_MACH_NAS100D=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_MACH_DSMG600=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_ARCH_IXDP4XX=y
[ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-01 09:53:23 +00:00
CONFIG_MACH_FSG=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_CPU_IXP46X=y
[ARM] 4311/1: ixp4xx: add KIXRP435 platform Add Intel KIXRP435 Reference Platform based on IXP43x processor. Fixed after review : access to cp15 removed in identification functions, used access to global processor_id instead Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: Ruslan Sushko <rsushko@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-06 14:00:31 +00:00
CONFIG_CPU_IXP43X=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_MACH_GTWX5715=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# IXP4xx Options
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_DMABOUNCE=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_IXP4XX_INDIRECT_PCI is not set
[ARM] 4806/1: ixp4xx: Ethernet support for the nslu2 and nas100d boards Enables the new ixp4xx qmgr and npe drivers in ixp4xx_defconfig. Sets up the corresponding platform data for the nslu2 and nas100d boards, and reads the ethernet MAC address from the internal flash. Tested on both little-endian and big-endian kernels. Tested-by: Tom King <tom@websb.net> Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Michael Westerhof <mwester@dls.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-01 23:04:05 +00:00
CONFIG_IXP4XX_QMGR=y
CONFIG_IXP4XX_NPE=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
#
# Boot options
#
#
# Power management
#
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Processor Type
#
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_OUTER_CACHE is not set
# CONFIG_IWMMXT is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_XSCALE_PMU=y
#
# Bus support
#
CONFIG_PCI=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_PCI_DEBUG is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_PCCARD is not set
#
# Kernel Features
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_PREEMPT is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
CONFIG_SPLIT_PTLOCK_CPUS=4096
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs"
# CONFIG_XIP_KERNEL is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_KEXEC is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
# CONFIG_FPE_NWFPE_XP is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
[ARM] Remove PM_LEGACY=y from selected ARM defconfigs Most ARM defconfigs don't actually need to have PM_LEGACY enabled. Disable it for ATEB9200, Collie, IXP4xx, OMAP H2, S3C2410 and Versatile. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-11 22:54:07 +00:00
# CONFIG_PM is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_SUSPEND_UP_POSSIBLE=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_PACKET=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_IP_VS=m
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
# CONFIG_IP_VS_PROTO_UDP is not set
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set
#
# IPVS application helper
#
# CONFIG_IPV6 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
#
# Core Netfilter Configuration
#
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_NETFILTER_NETLINK is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_IPRANGE is not set
CONFIG_IP_NF_MATCH_TOS=m
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_IP_NF_MATCH_AH is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_ARP_MANGLE is not set
#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_TIPC is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_DEV_APPLETALK=m
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
#
# Queueing/Scheduling
#
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_NET_SCH_RR is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
#
# Classification
#
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_NET_CLS_POLICE=y
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
# CONFIG_NET_CLS_IND is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_NET_SCH_FIFO=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_IEEE80211 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Device Drivers
#
#
# Generic Driver Options
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_FW_LOADER=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_DEBUG_DRIVER is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
# CONFIG_CONNECTOR is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_MTD_BLKDEVS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
# CONFIG_RFD_FTL is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP4XX=y
# CONFIG_MTD_PCI is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_MTD_INTEL_VR_NOR is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_MTD_PLATRAM is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_MTD_NAND_CAFE is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_MTD_NAND_NANDSIM is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
# CONFIG_MTD_ONENAND is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# UBI - Unsorted block images
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_MTD_UBI is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_PARPORT is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_BLK_DEV=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_BLK_DEV_UB is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_IDE=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_IDE_MAX_HWIFS=4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_BLK_DEV_IDESCSI is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_IDE_TASK_IOCTL is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_IDE_PROC_FS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_BLK_DEV_PLATFORM is not set
#
# PCI IDE chipsets support
#
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_IDEPCI_PCIBUS_ORDER=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
CONFIG_BLK_DEV_HPT366=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_BLK_DEV_JMICRON is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_BLK_DEV_IT8213 is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_BLK_DEV_IT821X is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_BLK_DEV_SL82C105 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_BLK_DEV_TC86C001 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_RAID_ATTRS is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
[ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-01 09:53:23 +00:00
CONFIG_SATA_VIA=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
CONFIG_PATA_ARTOP=y
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_IXP4XX_CF=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_MD is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_FUSION is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# IEEE 1394 (FireWire) support
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_FIREWIRE is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_MACVLAN is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_VETH is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_ARCNET is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_PHYLIB is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
[ARM] 4806/1: ixp4xx: Ethernet support for the nslu2 and nas100d boards Enables the new ixp4xx qmgr and npe drivers in ixp4xx_defconfig. Sets up the corresponding platform data for the nslu2 and nas100d boards, and reads the ethernet MAC address from the internal flash. Tested on both little-endian and big-endian kernels. Tested-by: Tom King <tom@websb.net> Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Michael Westerhof <mwester@dls.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-01 23:04:05 +00:00
CONFIG_IXP4XX_ETH=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_AX88796 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
# CONFIG_CASSINI is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_DM9000 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SKY2 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_BNX2 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_CHELSIO_T1 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_TR is not set
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# Wireless LAN
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# USB Network Adapters
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_HDLC_RAW=m
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_HDLC_RAW_ETH is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_PC300TOO is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_FARSYNC is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_DSCC4 is not set
[ARM] 4806/1: ixp4xx: Ethernet support for the nslu2 and nas100d boards Enables the new ixp4xx qmgr and npe drivers in ixp4xx_defconfig. Sets up the corresponding platform data for the nslu2 and nas100d boards, and reads the ethernet MAC address from the internal flash. Tested on both little-endian and big-endian kernels. Tested-by: Tom King <tom@websb.net> Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Michael Westerhof <mwester@dls.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-01 23:04:05 +00:00
# CONFIG_IXP4XX_HSS is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_WAN_ROUTER_DRIVERS=m
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_CYCLADES_SYNC is not set
# CONFIG_LAPBETHER is not set
# CONFIG_X25_ASY is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_ATM_DRIVERS=y
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
# CONFIG_ATM_DUMMY is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_NET_FC is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_INPUT_TABLET is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_INPUT_TOUCHSCREEN is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_INPUT_MISC=y
CONFIG_INPUT_IXP4XX_BEEPER=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_SERIAL_8250_PCI=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_SERIAL_8250_NR_UARTS=2
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_SERIAL_JSM is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_IXP4XX=m
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_DEVPORT=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_I2C=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_I2C_BOARDINFO=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_I2C_GPIO is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_I2C_PIIX4 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_I2C_IOP3XX is not set
CONFIG_I2C_IXP4XX=y
# CONFIG_I2C_NFORCE2 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_I2C_OCORES is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_I2C_SIMTEC is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_I2C_TAOS_EVM is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_I2C_STUB is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_I2C_TINY_USB is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# Miscellaneous I2C Chip support
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_DS1682 is not set
eeprom: More consistent symbol names Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-26 20:19:57 +00:00
CONFIG_EEPROM_LEGACY=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SENSORS_TSL2550 is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# SPI support
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SENSORS_AD7418 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SENSORS_ADM1029 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_SENSORS_ADM1031 is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_SENSORS_ADM9240 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SENSORS_ADT7470 is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_SENSORS_ATXP1 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_SENSORS_DS1621 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_SENSORS_LM92 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SENSORS_LM93 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_SENSORS_MAX1619 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SENSORS_MAX6650 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_SENSORS_PC87360 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SENSORS_PC87427 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_SENSORS_SIS5595 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SENSORS_DME1737 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_SENSORS_SMSC47M1 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SENSORS_SMSC47M192 is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_SENSORS_SMSC47B397 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SENSORS_THMC50 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_SENSORS_VIA686A is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
[ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-01 09:53:23 +00:00
CONFIG_SENSORS_W83781D=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SENSORS_W83791D is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_SENSORS_W83792D is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SENSORS_W83793 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# Watchdog Device Drivers
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_IXP4XX_WATCHDOG=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# PCI-based Watchdog Cards
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# USB-based Watchdog Cards
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_USBPCWATCHDOG is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# Sonics Silicon Backplane
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Graphics support
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_FB is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Sound
#
# CONFIG_SOUND is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# USB Input Devices
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
# CONFIG_USB_ATM is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# LED drivers
#
[ARM] 4805/1: ixp4xx: Use leds-gpio driver instead of IXP4XX-GPIO-LED driver These are the only three boards to use the IXP4XX-GPIO-LED driver, and they can all use the new leds-gpio driver instead with no change in functionality. -- Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-01 23:03:56 +00:00
CONFIG_LEDS_GPIO=y
[ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-01 09:53:23 +00:00
CONFIG_LEDS_FSG=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
[ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-01 09:53:23 +00:00
CONFIG_RTC_DRV_ISL1208=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_EXT2_FS_XIP is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_EXT4DEV_FS is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_INOTIFY=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_INOTIFY_USER=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_FUSE_FS is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_PROC_SYSCTL=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_SYSFS=y
CONFIG_TMPFS=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_TMPFS_POSIX_ACL is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_HUGETLB_PAGE is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_CONFIGFS_FS is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_JFFS2_FS_WRITEBUFFER=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
# CONFIG_JFFS2_SUMMARY is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_JFFS2_FS_XATTR is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_JFFS2_LZO is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_NETWORK_FILESYSTEMS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_NFS_V3_ACL is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_NFS_COMMON=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_SUNRPC=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SUNRPC_BIND34 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_KARMA_PARTITION is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_EFI_PARTITION is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SYSV68_PARTITION is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_NLS is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_PROFILING is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_MARKERS is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_MAGIC_SYSRQ=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
CONFIG_DETECT_SOFTLOCKUP=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_SCHED_DEBUG=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_SCHEDSTATS is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_DEBUG_SPINLOCK is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
# CONFIG_DEBUG_VM is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_FRAME_POINTER=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
[ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> --- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
# CONFIG_RCU_TORTURE_TEST is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_CRYPTO is not set
#
# Library routines
#
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_BITREVERSE=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_CRC_CCITT is not set
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 18:52:57 +00:00
# CONFIG_CRC16 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_CRC_ITU_T is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CONFIG_CRC32=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
# CONFIG_CRC7 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 23:17:24 +00:00
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
Reference in a new issue Copy permalink