398 lines
10 KiB
C
398 lines
10 KiB
C
![]() |
/* $Date: 2005/10/24 23:18:13 $ $RCSfile: mv88e1xxx.c,v $ $Revision: 1.49 $ */
|
||
|
#include "common.h"
|
||
|
#include "mv88e1xxx.h"
|
||
|
#include "cphy.h"
|
||
|
#include "elmer0.h"
|
||
|
|
||
|
/* MV88E1XXX MDI crossover register values */
|
||
|
#define CROSSOVER_MDI 0
|
||
|
#define CROSSOVER_MDIX 1
|
||
|
#define CROSSOVER_AUTO 3
|
||
|
|
||
|
#define INTR_ENABLE_MASK 0x6CA0
|
||
|
|
||
|
/*
|
||
|
* Set the bits given by 'bitval' in PHY register 'reg'.
|
||
|
*/
|
||
|
static void mdio_set_bit(struct cphy *cphy, int reg, u32 bitval)
|
||
|
{
|
||
|
u32 val;
|
||
|
|
||
|
(void) simple_mdio_read(cphy, reg, &val);
|
||
|
(void) simple_mdio_write(cphy, reg, val | bitval);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Clear the bits given by 'bitval' in PHY register 'reg'.
|
||
|
*/
|
||
|
static void mdio_clear_bit(struct cphy *cphy, int reg, u32 bitval)
|
||
|
{
|
||
|
u32 val;
|
||
|
|
||
|
(void) simple_mdio_read(cphy, reg, &val);
|
||
|
(void) simple_mdio_write(cphy, reg, val & ~bitval);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* NAME: phy_reset
|
||
|
*
|
||
|
* DESC: Reset the given PHY's port. NOTE: This is not a global
|
||
|
* chip reset.
|
||
|
*
|
||
|
* PARAMS: cphy - Pointer to PHY instance data.
|
||
|
*
|
||
![]() |
* RETURN: 0 - Successful reset.
|
||
![]() |
* -1 - Timeout.
|
||
|
*/
|
||
|
static int mv88e1xxx_reset(struct cphy *cphy, int wait)
|
||
|
{
|
||
|
u32 ctl;
|
||
|
int time_out = 1000;
|
||
|
|
||
|
mdio_set_bit(cphy, MII_BMCR, BMCR_RESET);
|
||
|
|
||
|
do {
|
||
|
(void) simple_mdio_read(cphy, MII_BMCR, &ctl);
|
||
|
ctl &= BMCR_RESET;
|
||
|
if (ctl)
|
||
|
udelay(1);
|
||
|
} while (ctl && --time_out);
|
||
|
|
||
|
return ctl ? -1 : 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e1xxx_interrupt_enable(struct cphy *cphy)
|
||
|
{
|
||
|
/* Enable PHY interrupts. */
|
||
|
(void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER,
|
||
|
INTR_ENABLE_MASK);
|
||
|
|
||
|
/* Enable Marvell interrupts through Elmer0. */
|
||
|
if (t1_is_asic(cphy->adapter)) {
|
||
|
u32 elmer;
|
||
|
|
||
|
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
|
||
|
elmer |= ELMER0_GP_BIT1;
|
||
![]() |
if (is_T2(cphy->adapter))
|
||
|
elmer |= ELMER0_GP_BIT2 | ELMER0_GP_BIT3 | ELMER0_GP_BIT4;
|
||
![]() |
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e1xxx_interrupt_disable(struct cphy *cphy)
|
||
|
{
|
||
|
/* Disable all phy interrupts. */
|
||
|
(void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER, 0);
|
||
|
|
||
|
/* Disable Marvell interrupts through Elmer0. */
|
||
|
if (t1_is_asic(cphy->adapter)) {
|
||
|
u32 elmer;
|
||
|
|
||
|
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
|
||
|
elmer &= ~ELMER0_GP_BIT1;
|
||
![]() |
if (is_T2(cphy->adapter))
|
||
![]() |
elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4);
|
||
|
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e1xxx_interrupt_clear(struct cphy *cphy)
|
||
|
{
|
||
|
u32 elmer;
|
||
|
|
||
|
/* Clear PHY interrupts by reading the register. */
|
||
|
(void) simple_mdio_read(cphy,
|
||
|
MV88E1XXX_INTERRUPT_STATUS_REGISTER, &elmer);
|
||
|
|
||
|
/* Clear Marvell interrupts through Elmer0. */
|
||
|
if (t1_is_asic(cphy->adapter)) {
|
||
|
t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
|
||
|
elmer |= ELMER0_GP_BIT1;
|
||
![]() |
if (is_T2(cphy->adapter))
|
||
![]() |
elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
|
||
|
t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Set the PHY speed and duplex. This also disables auto-negotiation, except
|
||
|
* for 1Gb/s, where auto-negotiation is mandatory.
|
||
|
*/
|
||
|
static int mv88e1xxx_set_speed_duplex(struct cphy *phy, int speed, int duplex)
|
||
|
{
|
||
|
u32 ctl;
|
||
|
|
||
|
(void) simple_mdio_read(phy, MII_BMCR, &ctl);
|
||
|
if (speed >= 0) {
|
||
|
ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
|
||
|
if (speed == SPEED_100)
|
||
|
ctl |= BMCR_SPEED100;
|
||
|
else if (speed == SPEED_1000)
|
||
|
ctl |= BMCR_SPEED1000;
|
||
|
}
|
||
|
if (duplex >= 0) {
|
||
|
ctl &= ~(BMCR_FULLDPLX | BMCR_ANENABLE);
|
||
|
if (duplex == DUPLEX_FULL)
|
||
|
ctl |= BMCR_FULLDPLX;
|
||
|
}
|
||
|
if (ctl & BMCR_SPEED1000) /* auto-negotiation required for 1Gb/s */
|
||
|
ctl |= BMCR_ANENABLE;
|
||
|
(void) simple_mdio_write(phy, MII_BMCR, ctl);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e1xxx_crossover_set(struct cphy *cphy, int crossover)
|
||
|
{
|
||
|
u32 data32;
|
||
|
|
||
|
(void) simple_mdio_read(cphy,
|
||
|
MV88E1XXX_SPECIFIC_CNTRL_REGISTER, &data32);
|
||
|
data32 &= ~V_PSCR_MDI_XOVER_MODE(M_PSCR_MDI_XOVER_MODE);
|
||
|
data32 |= V_PSCR_MDI_XOVER_MODE(crossover);
|
||
|
(void) simple_mdio_write(cphy,
|
||
|
MV88E1XXX_SPECIFIC_CNTRL_REGISTER, data32);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e1xxx_autoneg_enable(struct cphy *cphy)
|
||
|
{
|
||
|
u32 ctl;
|
||
|
|
||
|
(void) mv88e1xxx_crossover_set(cphy, CROSSOVER_AUTO);
|
||
|
|
||
|
(void) simple_mdio_read(cphy, MII_BMCR, &ctl);
|
||
|
/* restart autoneg for change to take effect */
|
||
|
ctl |= BMCR_ANENABLE | BMCR_ANRESTART;
|
||
|
(void) simple_mdio_write(cphy, MII_BMCR, ctl);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e1xxx_autoneg_disable(struct cphy *cphy)
|
||
|
{
|
||
|
u32 ctl;
|
||
|
|
||
|
/*
|
||
|
* Crossover *must* be set to manual in order to disable auto-neg.
|
||
|
* The Alaska FAQs document highlights this point.
|
||
|
*/
|
||
|
(void) mv88e1xxx_crossover_set(cphy, CROSSOVER_MDI);
|
||
|
|
||
|
/*
|
||
|
* Must include autoneg reset when disabling auto-neg. This
|
||
|
* is described in the Alaska FAQ document.
|
||
|
*/
|
||
|
(void) simple_mdio_read(cphy, MII_BMCR, &ctl);
|
||
|
ctl &= ~BMCR_ANENABLE;
|
||
|
(void) simple_mdio_write(cphy, MII_BMCR, ctl | BMCR_ANRESTART);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e1xxx_autoneg_restart(struct cphy *cphy)
|
||
|
{
|
||
|
mdio_set_bit(cphy, MII_BMCR, BMCR_ANRESTART);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e1xxx_advertise(struct cphy *phy, unsigned int advertise_map)
|
||
|
{
|
||
|
u32 val = 0;
|
||
|
|
||
|
if (advertise_map &
|
||
|
(ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full)) {
|
||
|
(void) simple_mdio_read(phy, MII_GBCR, &val);
|
||
|
val &= ~(GBCR_ADV_1000HALF | GBCR_ADV_1000FULL);
|
||
|
if (advertise_map & ADVERTISED_1000baseT_Half)
|
||
|
val |= GBCR_ADV_1000HALF;
|
||
|
if (advertise_map & ADVERTISED_1000baseT_Full)
|
||
|
val |= GBCR_ADV_1000FULL;
|
||
|
}
|
||
|
(void) simple_mdio_write(phy, MII_GBCR, val);
|
||
|
|
||
|
val = 1;
|
||
|
if (advertise_map & ADVERTISED_10baseT_Half)
|
||
|
val |= ADVERTISE_10HALF;
|
||
|
if (advertise_map & ADVERTISED_10baseT_Full)
|
||
|
val |= ADVERTISE_10FULL;
|
||
|
if (advertise_map & ADVERTISED_100baseT_Half)
|
||
|
val |= ADVERTISE_100HALF;
|
||
|
if (advertise_map & ADVERTISED_100baseT_Full)
|
||
|
val |= ADVERTISE_100FULL;
|
||
|
if (advertise_map & ADVERTISED_PAUSE)
|
||
|
val |= ADVERTISE_PAUSE;
|
||
|
if (advertise_map & ADVERTISED_ASYM_PAUSE)
|
||
|
val |= ADVERTISE_PAUSE_ASYM;
|
||
|
(void) simple_mdio_write(phy, MII_ADVERTISE, val);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e1xxx_set_loopback(struct cphy *cphy, int on)
|
||
|
{
|
||
|
if (on)
|
||
|
mdio_set_bit(cphy, MII_BMCR, BMCR_LOOPBACK);
|
||
|
else
|
||
|
mdio_clear_bit(cphy, MII_BMCR, BMCR_LOOPBACK);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e1xxx_get_link_status(struct cphy *cphy, int *link_ok,
|
||
|
int *speed, int *duplex, int *fc)
|
||
|
{
|
||
|
u32 status;
|
||
|
int sp = -1, dplx = -1, pause = 0;
|
||
|
|
||
|
(void) simple_mdio_read(cphy,
|
||
|
MV88E1XXX_SPECIFIC_STATUS_REGISTER, &status);
|
||
|
if ((status & V_PSSR_STATUS_RESOLVED) != 0) {
|
||
|
if (status & V_PSSR_RX_PAUSE)
|
||
|
pause |= PAUSE_RX;
|
||
|
if (status & V_PSSR_TX_PAUSE)
|
||
|
pause |= PAUSE_TX;
|
||
|
dplx = (status & V_PSSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
|
||
|
sp = G_PSSR_SPEED(status);
|
||
|
if (sp == 0)
|
||
|
sp = SPEED_10;
|
||
|
else if (sp == 1)
|
||
|
sp = SPEED_100;
|
||
|
else
|
||
|
sp = SPEED_1000;
|
||
|
}
|
||
|
if (link_ok)
|
||
|
*link_ok = (status & V_PSSR_LINK) != 0;
|
||
|
if (speed)
|
||
|
*speed = sp;
|
||
|
if (duplex)
|
||
|
*duplex = dplx;
|
||
|
if (fc)
|
||
|
*fc = pause;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e1xxx_downshift_set(struct cphy *cphy, int downshift_enable)
|
||
|
{
|
||
|
u32 val;
|
||
|
|
||
|
(void) simple_mdio_read(cphy,
|
||
|
MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER, &val);
|
||
|
|
||
|
/*
|
||
|
* Set the downshift counter to 2 so we try to establish Gb link
|
||
|
* twice before downshifting.
|
||
|
*/
|
||
|
val &= ~(V_DOWNSHIFT_ENABLE | V_DOWNSHIFT_CNT(M_DOWNSHIFT_CNT));
|
||
|
|
||
|
if (downshift_enable)
|
||
|
val |= V_DOWNSHIFT_ENABLE | V_DOWNSHIFT_CNT(2);
|
||
|
(void) simple_mdio_write(cphy,
|
||
|
MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER, val);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mv88e1xxx_interrupt_handler(struct cphy *cphy)
|
||
|
{
|
||
|
int cphy_cause = 0;
|
||
|
u32 status;
|
||
|
|
||
|
/*
|
||
|
* Loop until cause reads zero. Need to handle bouncing interrupts.
|
||
![]() |
*/
|
||
![]() |
while (1) {
|
||
|
u32 cause;
|
||
|
|
||
|
(void) simple_mdio_read(cphy,
|
||
|
MV88E1XXX_INTERRUPT_STATUS_REGISTER,
|
||
|
&cause);
|
||
|
cause &= INTR_ENABLE_MASK;
|
||
![]() |
if (!cause)
|
||
|
break;
|
||
![]() |
|
||
|
if (cause & MV88E1XXX_INTR_LINK_CHNG) {
|
||
|
(void) simple_mdio_read(cphy,
|
||
|
MV88E1XXX_SPECIFIC_STATUS_REGISTER, &status);
|
||
|
|
||
![]() |
if (status & MV88E1XXX_INTR_LINK_CHNG)
|
||
![]() |
cphy->state |= PHY_LINK_UP;
|
||
![]() |
else {
|
||
![]() |
cphy->state &= ~PHY_LINK_UP;
|
||
|
if (cphy->state & PHY_AUTONEG_EN)
|
||
|
cphy->state &= ~PHY_AUTONEG_RDY;
|
||
|
cphy_cause |= cphy_cause_link_change;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (cause & MV88E1XXX_INTR_AUTONEG_DONE)
|
||
|
cphy->state |= PHY_AUTONEG_RDY;
|
||
|
|
||
|
if ((cphy->state & (PHY_LINK_UP | PHY_AUTONEG_RDY)) ==
|
||
|
(PHY_LINK_UP | PHY_AUTONEG_RDY))
|
||
|
cphy_cause |= cphy_cause_link_change;
|
||
|
}
|
||
|
return cphy_cause;
|
||
|
}
|
||
|
|
||
|
static void mv88e1xxx_destroy(struct cphy *cphy)
|
||
|
{
|
||
|
kfree(cphy);
|
||
|
}
|
||
|
|
||
|
static struct cphy_ops mv88e1xxx_ops = {
|
||
|
.destroy = mv88e1xxx_destroy,
|
||
|
.reset = mv88e1xxx_reset,
|
||
|
.interrupt_enable = mv88e1xxx_interrupt_enable,
|
||
|
.interrupt_disable = mv88e1xxx_interrupt_disable,
|
||
|
.interrupt_clear = mv88e1xxx_interrupt_clear,
|
||
|
.interrupt_handler = mv88e1xxx_interrupt_handler,
|
||
|
.autoneg_enable = mv88e1xxx_autoneg_enable,
|
||
|
.autoneg_disable = mv88e1xxx_autoneg_disable,
|
||
|
.autoneg_restart = mv88e1xxx_autoneg_restart,
|
||
|
.advertise = mv88e1xxx_advertise,
|
||
|
.set_loopback = mv88e1xxx_set_loopback,
|
||
|
.set_speed_duplex = mv88e1xxx_set_speed_duplex,
|
||
|
.get_link_status = mv88e1xxx_get_link_status,
|
||
|
};
|
||
|
|
||
![]() |
static struct cphy *mv88e1xxx_phy_create(struct net_device *dev, int phy_addr,
|
||
![]() |
const struct mdio_ops *mdio_ops)
|
||
![]() |
{
|
||
![]() |
struct adapter *adapter = netdev_priv(dev);
|
||
![]() |
struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL);
|
||
|
|
||
![]() |
if (!cphy)
|
||
|
return NULL;
|
||
![]() |
|
||
![]() |
cphy_init(cphy, dev, phy_addr, &mv88e1xxx_ops, mdio_ops);
|
||
![]() |
|
||
|
/* Configure particular PHY's to run in a different mode. */
|
||
|
if ((board_info(adapter)->caps & SUPPORTED_TP) &&
|
||
|
board_info(adapter)->chip_phy == CHBT_PHY_88E1111) {
|
||
|
/*
|
||
|
* Configure the PHY transmitter as class A to reduce EMI.
|
||
|
*/
|
||
|
(void) simple_mdio_write(cphy,
|
||
|
MV88E1XXX_EXTENDED_ADDR_REGISTER, 0xB);
|
||
|
(void) simple_mdio_write(cphy,
|
||
|
MV88E1XXX_EXTENDED_REGISTER, 0x8004);
|
||
|
}
|
||
|
(void) mv88e1xxx_downshift_set(cphy, 1); /* Enable downshift */
|
||
|
|
||
![]() |
/* LED */
|
||
![]() |
if (is_T2(adapter)) {
|
||
|
(void) simple_mdio_write(cphy,
|
||
|
MV88E1XXX_LED_CONTROL_REGISTER, 0x1);
|
||
![]() |
}
|
||
![]() |
|
||
|
return cphy;
|
||
|
}
|
||
|
|
||
|
static int mv88e1xxx_phy_reset(adapter_t* adapter)
|
||
|
{
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
![]() |
const struct gphy t1_mv88e1xxx_ops = {
|
||
|
.create = mv88e1xxx_phy_create,
|
||
|
.reset = mv88e1xxx_phy_reset
|
||
![]() |
};
|