linux/lib/Kconfig

280 lines
6.1 KiB
Plaintext
Raw Normal View History

#
# Library configuration
#
config BINARY_PRINTF
def_bool n
menu "Library routines"
config RAID6_PQ
tristate
config BITREVERSE
tristate
config RATIONAL
boolean
config GENERIC_FIND_FIRST_BIT
bool
config CRC_CCITT
tristate "CRC-CCITT functions"
help
This option is provided for the case where no in-kernel-tree
modules require CRC-CCITT functions, but a module built outside
the kernel tree does. Such modules that use library CRC-CCITT
functions require M here.
config CRC16
tristate "CRC16 functions"
help
This option is provided for the case where no in-kernel-tree
modules require CRC16 functions, but a module built outside
the kernel tree does. Such modules that use library CRC16
functions require M here.
config CRC_T10DIF
tristate "CRC calculation for the T10 Data Integrity Field"
help
This option is only needed if a module that's not in the
kernel tree needs to calculate CRC checks for use with the
SCSI data integrity subsystem.
config CRC_ITU_T
tristate "CRC ITU-T V.41 functions"
help
This option is provided for the case where no in-kernel-tree
modules require CRC ITU-T V.41 functions, but a module built outside
the kernel tree does. Such modules that use library CRC ITU-T V.41
functions require M here.
config CRC32
tristate "CRC32 functions"
default y
select BITREVERSE
help
This option is provided for the case where no in-kernel-tree
modules require CRC32 functions, but a module built outside the
kernel tree does. Such modules that use library CRC32 functions
require M here.
config CRC7
tristate "CRC7 functions"
help
This option is provided for the case where no in-kernel-tree
modules require CRC7 functions, but a module built outside
the kernel tree does. Such modules that use library CRC7
functions require M here.
config LIBCRC32C
tristate "CRC32c (Castagnoli, et al) Cyclic Redundancy-Check"
select CRYPTO
select CRYPTO_CRC32C
help
This option is provided for the case where no in-kernel-tree
modules require CRC32c functions, but a module built outside the
kernel tree does. Such modules that use library CRC32c functions
require M here. See Castagnoli93.
Module will be libcrc32c.
config CRC8
tristate "CRC8 function"
help
This option provides CRC8 function. Drivers may select this
when they need to do cyclic redundancy check according CRC8
algorithm. Module will be called crc8.
config AUDIT_GENERIC
bool
depends on AUDIT && !AUDIT_ARCH
default y
#
# compression support is select'ed if needed
#
config ZLIB_INFLATE
tristate
config ZLIB_DEFLATE
tristate
config LZO_COMPRESS
tristate
config LZO_DECOMPRESS
tristate
source "lib/xz/Kconfig"
#
# These all provide a common interface (hence the apparent duplication with
# ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
#
config DECOMPRESS_GZIP
select ZLIB_INFLATE
tristate
config DECOMPRESS_BZIP2
tristate
config DECOMPRESS_LZMA
tristate
config DECOMPRESS_XZ
select XZ_DEC
tristate
config DECOMPRESS_LZO
select LZO_DECOMPRESS
tristate
[PATCH] ia64 uncached alloc This patch contains the ia64 uncached page allocator and the generic allocator (genalloc). The uncached allocator was formerly part of the SN2 mspec driver but there are several other users of it so it has been split off from the driver. The generic allocator can be used by device driver to manage special memory etc. The generic allocator is based on the allocator from the sym53c8xx_2 driver. Various users on ia64 needs uncached memory. The SGI SN architecture requires it for inter-partition communication between partitions within a large NUMA cluster. The specific user for this is the XPC code. Another application is large MPI style applications which use it for synchronization, on SN this can be done using special 'fetchop' operations but it also benefits non SN hardware which may use regular uncached memory for this purpose. Performance of doing this through uncached vs cached memory is pretty substantial. This is handled by the mspec driver which I will push out in a seperate patch. Rather than creating a specific allocator for just uncached memory I came up with genalloc which is a generic purpose allocator that can be used by device drivers and other subsystems as they please. For instance to handle onboard device memory. It was derived from the sym53c7xx_2 driver's allocator which is also an example of a potential user (I am refraining from modifying sym2 right now as it seems to have been under fairly heavy development recently). On ia64 memory has various properties within a granule, ie. it isn't safe to access memory as uncached within the same granule as currently has memory accessed in cached mode. The regular system therefore doesn't utilize memory in the lower granules which is mixed in with device PAL code etc. The uncached driver walks the EFI memmap and pulls out the spill uncached pages and sticks them into the uncached pool. Only after these chunks have been utilized, will it start converting regular cached memory into uncached memory. Hence the reason for the EFI related code additions. Signed-off-by: Jes Sorensen <jes@wildopensource.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 00:15:02 +00:00
#
# Generic allocator support is selected if needed
#
config GENERIC_ALLOCATOR
boolean
#
# reed solomon support is select'ed if needed
#
config REED_SOLOMON
tristate
config REED_SOLOMON_ENC8
boolean
config REED_SOLOMON_DEC8
boolean
config REED_SOLOMON_ENC16
boolean
config REED_SOLOMON_DEC16
boolean
lib: add shared BCH ECC library This is a new software BCH encoding/decoding library, similar to the shared Reed-Solomon library. Binary BCH (Bose-Chaudhuri-Hocquenghem) codes are widely used to correct errors in NAND flash devices requiring more than 1-bit ecc correction; they are generally better suited for NAND flash than RS codes because NAND bit errors do not occur in bursts. Latest SLC NAND devices typically require at least 4-bit ecc protection per 512 bytes block. This library provides software encoding/decoding, but may also be used with ASIC/SoC hardware BCH engines to perform error correction. It is being currently used for this purpose on an OMAP3630 board (4bit/8bit HW BCH). It has also been used to decode raw dumps of NAND devices with on-die BCH ecc engines (e.g. Micron 4bit ecc SLC devices). Latest NAND devices (including SLC) can exhibit high error rates (typically a dozen or more bitflips per hour during stress tests); in order to minimize the performance impact of error correction, this library implements recently developed algorithms for fast polynomial root finding (see bch.c header for details) instead of the traditional exhaustive Chien root search; a few performance figures are provided below: Platform: arm926ejs @ 468 MHz, 32 KiB icache, 16 KiB dcache BCH ecc : 4-bit per 512 bytes Encoding average throughput: 250 Mbits/s Error correction time (compared with Chien search): average worst average (Chien) worst (Chien) ---------------------------------------------------------- 1 bit 8.5 µs 11 µs 200 µs 383 µs 2 bit 9.7 µs 12.5 µs 477 µs 728 µs 3 bit 18.1 µs 20.6 µs 758 µs 1010 µs 4 bit 19.5 µs 23 µs 1028 µs 1280 µs In the above figures, "worst" is meant in terms of error pattern, not in terms of cache miss / page faults effects (not taken into account here). The library has been extensively tested on the following platforms: x86, x86_64, arm926ejs, omap3630, qemu-ppc64, qemu-mips. Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 10:05:32 +00:00
#
# BCH support is selected if needed
#
config BCH
tristate
config BCH_CONST_PARAMS
boolean
help
Drivers may select this option to force specific constant
values for parameters 'm' (Galois field order) and 't'
(error correction capability). Those specific values must
be set by declaring default values for symbols BCH_CONST_M
and BCH_CONST_T.
Doing so will enable extra compiler optimizations,
improving encoding and decoding performance up to 2x for
usual (m,t) values (typically such that m*t < 200).
When this option is selected, the BCH library supports
only a single (m,t) configuration. This is mainly useful
for NAND flash board drivers requiring known, fixed BCH
parameters.
config BCH_CONST_M
int
range 5 15
help
Constant value for Galois field order 'm'. If 'k' is the
number of data bits to protect, 'm' should be chosen such
that (k + m*t) <= 2**m - 1.
Drivers should declare a default value for this symbol if
they select option BCH_CONST_PARAMS.
config BCH_CONST_T
int
help
Constant value for error correction capability in bits 't'.
Drivers should declare a default value for this symbol if
they select option BCH_CONST_PARAMS.
#
# Textsearch support is select'ed if needed
#
config TEXTSEARCH
boolean
config TEXTSEARCH_KMP
tristate
config TEXTSEARCH_BM
tristate
config TEXTSEARCH_FSM
tristate
config BTREE
boolean
config HAS_IOMEM
boolean
depends on !NO_IOMEM
default y
config HAS_IOPORT
boolean
depends on HAS_IOMEM && !NO_IOPORT
default y
config HAS_DMA
boolean
depends on !NO_DMA
default y
config CHECK_SIGNATURE
bool
config CPUMASK_OFFSTACK
bool "Force CPU masks off stack" if DEBUG_PER_CPU_MAPS
help
Use dynamic allocation for cpumask_var_t, instead of putting
them on the stack. This is a bit more expensive, but avoids
stack overflow.
config DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
bool "Disable obsolete cpumask functions" if DEBUG_PER_CPU_MAPS
depends on EXPERIMENTAL && BROKEN
config CPU_RMAP
bool
depends on SMP
#
# Netlink attribute parsing support is select'ed if needed
#
config NLATTR
bool
#
# Generic 64-bit atomic support is selected if needed
#
config GENERIC_ATOMIC64
bool
config LRU_CACHE
tristate
config AVERAGE
bool "Averaging functions"
help
This option is provided for the case where no in-kernel-tree
modules require averaging functions, but a module built outside
the kernel tree does. Such modules that use library averaging
functions require Y here.
If unsure, say N.
config CORDIC
tristate "Cordic function"
help
The option provides arithmetic function using cordic algorithm
so its calculations are in fixed point. Modules can select this
when they require this function. Module will be called cordic.
endmenu