linux/arch/arm/mach-omap1/board-h3.c

461 lines
10 KiB
C
Raw Normal View History

/*
* linux/arch/arm/mach-omap1/board-h3.c
*
* This file contains OMAP1710 H3 specific code.
*
* Copyright (C) 2004 Texas Instruments, Inc.
* Copyright (C) 2002 MontaVista Software, Inc.
* Copyright (C) 2001 RidgeRun, Inc.
* Author: RidgeRun, Inc.
* Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/major.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/errno.h>
#include <linux/workqueue.h>
#include <linux/i2c.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/leds.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
#include <plat-omap/dma-omap.h>
#include <mach/flash.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/usb.h>
#include "common.h"
#include "board-h3.h"
/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
#define OMAP1710_ETHR_START 0x04000300
#define H3_TS_GPIO 48
static const unsigned int h3_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(1, 0, KEY_RIGHT),
KEY(2, 0, KEY_3),
KEY(3, 0, KEY_F10),
KEY(4, 0, KEY_F5),
KEY(5, 0, KEY_9),
KEY(0, 1, KEY_DOWN),
KEY(1, 1, KEY_UP),
KEY(2, 1, KEY_2),
KEY(3, 1, KEY_F9),
KEY(4, 1, KEY_F7),
KEY(5, 1, KEY_0),
KEY(0, 2, KEY_ENTER),
KEY(1, 2, KEY_6),
KEY(2, 2, KEY_1),
KEY(3, 2, KEY_F2),
KEY(4, 2, KEY_F6),
KEY(5, 2, KEY_HOME),
KEY(0, 3, KEY_8),
KEY(1, 3, KEY_5),
KEY(2, 3, KEY_F12),
KEY(3, 3, KEY_F3),
KEY(4, 3, KEY_F8),
KEY(5, 3, KEY_END),
KEY(0, 4, KEY_7),
KEY(1, 4, KEY_4),
KEY(2, 4, KEY_F11),
KEY(3, 4, KEY_F1),
KEY(4, 4, KEY_F4),
KEY(5, 4, KEY_ESC),
KEY(0, 5, KEY_F13),
KEY(1, 5, KEY_F14),
KEY(2, 5, KEY_F15),
KEY(3, 5, KEY_F16),
KEY(4, 5, KEY_SLEEP),
};
static struct mtd_partition nor_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
.offset = 0,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next sector */
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = 0,
},
/* kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_2M,
.mask_flags = 0
},
/* file system */
{
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0
}
};
static struct physmap_flash_data nor_data = {
.width = 2,
.set_vpp = omap1_set_vpp,
.parts = nor_partitions,
.nr_parts = ARRAY_SIZE(nor_partitions),
};
static struct resource nor_resource = {
/* This is on CS3, wherever it's mapped */
.flags = IORESOURCE_MEM,
};
static struct platform_device nor_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &nor_data,
},
.num_resources = 1,
.resource = &nor_resource,
};
static struct mtd_partition nand_partitions[] = {
#if 0
/* REVISIT: enable these partitions if you make NAND BOOT work */
{
.name = "xloader",
.offset = 0,
.size = 64 * 1024,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "bootloader",
.offset = MTDPART_OFS_APPEND,
.size = 256 * 1024,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = 192 * 1024,
},
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = 2 * SZ_1M,
},
#endif
{
.name = "filesystem",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
},
};
#define H3_NAND_RB_GPIO_PIN 10
static int nand_dev_ready(struct mtd_info *mtd)
{
return gpio_get_value(H3_NAND_RB_GPIO_PIN);
}
static struct platform_nand_data nand_platdata = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.nr_partitions = ARRAY_SIZE(nand_partitions),
.partitions = nand_partitions,
.options = NAND_SAMSUNG_LP_OPTIONS,
},
.ctrl = {
ARM: OMAP1: board files: deduplicate and clean some NAND-related code The H2, H3, Perseus2, and FSample board files all contain the same duplicated code to handle NAND commands. That code is missing some casts around conversions from unsigned long to void __iomem *. Consolidate the duplicated code into a new file, arch/arm/mach-omap1/board-nand.c. Resolve the sparse warnings by adding appropriate casts: arch/arm/mach-omap1/board-h2.c:193:9: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap1/board-h2.c:193:9: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap1/board-h2.c:193:9: got unsigned long arch/arm/mach-omap1/board-perseus2.c:157:9: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap1/board-perseus2.c:157:9: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap1/board-perseus2.c:157:9: got unsigned long arch/arm/mach-omap1/board-fsample.c:199:9: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap1/board-fsample.c:199:9: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap1/board-fsample.c:199:9: got unsigned long arch/arm/mach-omap1/board-h3.c:195:9: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap1/board-h3.c:195:9: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap1/board-h3.c:195:9: got unsigned long Thanks to Arnd Bergmann <arnd@arndb.de> for suggesting a cleaner implementation of omap1_nand_cmd_ctl(), avoiding some casts. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Brian Swetland <swetland@google.com> Cc: Imre Deak <imre.deak@nokia.com> Cc: Greg Lonnon <glonnon@ridgerun.com> Cc: Kevin Hilman <kjh@hilman.org> Cc: Kevin Hilman <khilman@ti.com> Cc: Arnd Bergmann <arnd@arndb.de>
2012-04-13 12:34:31 +00:00
.cmd_ctrl = omap1_nand_cmd_ctl,
.dev_ready = nand_dev_ready,
},
};
static struct resource nand_resource = {
.flags = IORESOURCE_MEM,
};
static struct platform_device nand_device = {
.name = "gen_nand",
.id = 0,
.dev = {
.platform_data = &nand_platdata,
},
.num_resources = 1,
.resource = &nand_resource,
};
static struct smc91x_platdata smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
.leda = RPC_LED_100_10,
.ledb = RPC_LED_TX_RX,
};
static struct resource smc91x_resources[] = {
[0] = {
.start = OMAP1710_ETHR_START, /* Physical */
.end = OMAP1710_ETHR_START + 0xf,
.flags = IORESOURCE_MEM,
},
[1] = {
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.dev = {
.platform_data = &smc91x_info,
},
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static void __init h3_init_smc91x(void)
{
omap_cfg_reg(W15_1710_GPIO40);
if (gpio_request(40, "SMC91x irq") < 0) {
printk("Error requesting gpio 40 for smc91x irq\n");
return;
}
}
#define GPTIMER_BASE 0xFFFB1400
#define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800))
#define GPTIMER_REGS_SIZE 0x46
static struct resource intlat_resources[] = {
[0] = {
.start = GPTIMER_REGS(0), /* Physical */
.end = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = INT_1610_GPTIMER1,
.end = INT_1610_GPTIMER1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device intlat_device = {
.name = "omap_intlat",
.id = 0,
.num_resources = ARRAY_SIZE(intlat_resources),
.resource = intlat_resources,
};
static struct resource h3_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
.end = INT_KEYBOARD,
.flags = IORESOURCE_IRQ,
},
};
static const struct matrix_keymap_data h3_keymap_data = {
.keymap = h3_keymap,
.keymap_size = ARRAY_SIZE(h3_keymap),
};
static struct omap_kp_platform_data h3_kp_data = {
.rows = 8,
.cols = 8,
.keymap_data = &h3_keymap_data,
.rep = true,
.delay = 9,
.dbounce = true,
};
static struct platform_device h3_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &h3_kp_data,
},
.num_resources = ARRAY_SIZE(h3_kp_resources),
.resource = h3_kp_resources,
};
static struct platform_device h3_lcd_device = {
.name = "lcd_h3",
.id = -1,
};
static struct spi_board_info h3_spi_board_info[] __initdata = {
[0] = {
.modalias = "tsc2101",
.bus_num = 2,
.chip_select = 0,
.max_speed_hz = 16000000,
/* .platform_data = &tsc_platform_data, */
},
};
static struct gpio_led h3_gpio_led_pins[] = {
{
.name = "h3:red",
.default_trigger = "heartbeat",
.gpio = 3,
},
{
.name = "h3:green",
.default_trigger = "cpu0",
.gpio = OMAP_MPUIO(4),
},
};
static struct gpio_led_platform_data h3_gpio_led_data = {
.leds = h3_gpio_led_pins,
.num_leds = ARRAY_SIZE(h3_gpio_led_pins),
};
static struct platform_device h3_gpio_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &h3_gpio_led_data,
},
};
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
&smc91x_device,
&intlat_device,
&h3_kp_device,
&h3_lcd_device,
&h3_gpio_leds,
};
static struct omap_usb_config h3_usb_config __initdata = {
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,
#ifdef CONFIG_USB_GADGET_OMAP
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
.hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
#endif
.pins[1] = 3,
};
static struct omap_lcd_config h3_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct i2c_board_info __initdata h3_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65013", 0x48),
},
{
I2C_BOARD_INFO("isp1301_omap", 0x2d),
},
};
static void __init h3_init(void)
{
h3_init_smc91x();
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
* to address 0 by a dip switch), NAND on CS2B. The NAND driver will
* notice whether a NAND chip is enabled at probe time.
*
* H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND
* (which on H2 may be 16bit) on CS3. Try detecting that in code here,
* to avoid probing every possible flash configuration...
*/
nor_resource.end = nor_resource.start = omap_cs3_phys();
nor_resource.end += SZ_32M - 1;
nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
nand_resource.end += SZ_4K - 1;
if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0)
BUG();
gpio_direction_input(H3_NAND_RB_GPIO_PIN);
/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
omap_cfg_reg(V2_1710_GPIO10);
/* Mux pins for keypad */
omap_cfg_reg(F18_1610_KBC0);
omap_cfg_reg(D20_1610_KBC1);
omap_cfg_reg(D19_1610_KBC2);
omap_cfg_reg(E18_1610_KBC3);
omap_cfg_reg(C21_1610_KBC4);
omap_cfg_reg(G18_1610_KBR0);
omap_cfg_reg(F19_1610_KBR1);
omap_cfg_reg(H14_1610_KBR2);
omap_cfg_reg(E20_1610_KBR3);
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
/* GPIO based LEDs */
omap_cfg_reg(P18_1610_GPIO3);
omap_cfg_reg(MPUIO4);
smc91x_resources[1].start = gpio_to_irq(40);
smc91x_resources[1].end = gpio_to_irq(40);
platform_add_devices(devices, ARRAY_SIZE(devices));
h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO);
spi_register_board_info(h3_spi_board_info,
ARRAY_SIZE(h3_spi_board_info));
omap_serial_init();
h3_i2c_board_info[1].irq = gpio_to_irq(14);
omap_register_i2c_bus(1, 100, h3_i2c_board_info,
ARRAY_SIZE(h3_i2c_board_info));
omap1_usb_init(&h3_usb_config);
h3_mmc_init();
omapfb_set_lcd_config(&h3_lcd_config);
}
MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
/* Maintainer: Texas Instruments, Inc. */
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
.init_machine = h3_init,
.init_late = omap1_init_late,
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END