linux/drivers/video/backlight/cr_bllcd.c

288 lines
7.2 KiB
C
Raw Normal View History

/*
* Copyright (c) Intel Corp. 2007.
* All Rights Reserved.
*
* Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
* develop this driver.
*
* This file is part of the Carillo Ranch video subsystem driver.
* The Carillo Ranch video subsystem driver is free software;
* you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* The Carillo Ranch video subsystem driver is distributed
* in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this driver; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Authors:
* Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
* Alan Hourihane <alanh-at-tungstengraphics-dot-com>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/lcd.h>
#include <linux/pci.h>
/* The LVDS- and panel power controls sits on the
* GPIO port of the ISA bridge.
*/
#define CRVML_DEVICE_LPC 0x27B8
#define CRVML_REG_GPIOBAR 0x48
#define CRVML_REG_GPIOEN 0x4C
#define CRVML_GPIOEN_BIT (1 << 4)
#define CRVML_PANEL_PORT 0x38
#define CRVML_LVDS_ON 0x00000001
#define CRVML_PANEL_ON 0x00000002
#define CRVML_BACKLIGHT_OFF 0x00000004
/* The PLL Clock register sits on Host bridge */
#define CRVML_DEVICE_MCH 0x5001
#define CRVML_REG_MCHBAR 0x44
#define CRVML_REG_MCHEN 0x54
#define CRVML_MCHEN_BIT (1 << 28)
#define CRVML_MCHMAP_SIZE 4096
#define CRVML_REG_CLOCK 0xc3c
#define CRVML_CLOCK_SHIFT 8
#define CRVML_CLOCK_MASK 0x00000f00
static struct pci_dev *lpc_dev;
static u32 gpio_bar;
struct cr_panel {
struct backlight_device *cr_backlight_device;
struct lcd_device *cr_lcd_device;
};
static int cr_backlight_set_intensity(struct backlight_device *bd)
{
int intensity = bd->props.brightness;
u32 addr = gpio_bar + CRVML_PANEL_PORT;
u32 cur = inl(addr);
if (bd->props.power == FB_BLANK_UNBLANK)
intensity = FB_BLANK_UNBLANK;
if (bd->props.fb_blank == FB_BLANK_UNBLANK)
intensity = FB_BLANK_UNBLANK;
if (bd->props.power == FB_BLANK_POWERDOWN)
intensity = FB_BLANK_POWERDOWN;
if (bd->props.fb_blank == FB_BLANK_POWERDOWN)
intensity = FB_BLANK_POWERDOWN;
if (intensity == FB_BLANK_UNBLANK) { /* FULL ON */
cur &= ~CRVML_BACKLIGHT_OFF;
outl(cur, addr);
} else if (intensity == FB_BLANK_POWERDOWN) { /* OFF */
cur |= CRVML_BACKLIGHT_OFF;
outl(cur, addr);
} /* anything else, don't bother */
return 0;
}
static int cr_backlight_get_intensity(struct backlight_device *bd)
{
u32 addr = gpio_bar + CRVML_PANEL_PORT;
u32 cur = inl(addr);
u8 intensity;
if (cur & CRVML_BACKLIGHT_OFF)
intensity = FB_BLANK_POWERDOWN;
else
intensity = FB_BLANK_UNBLANK;
return intensity;
}
static struct backlight_ops cr_backlight_ops = {
.get_brightness = cr_backlight_get_intensity,
.update_status = cr_backlight_set_intensity,
};
static void cr_panel_on(void)
{
u32 addr = gpio_bar + CRVML_PANEL_PORT;
u32 cur = inl(addr);
if (!(cur & CRVML_PANEL_ON)) {
/* Make sure LVDS controller is down. */
if (cur & 0x00000001) {
cur &= ~CRVML_LVDS_ON;
outl(cur, addr);
}
/* Power up Panel */
schedule_timeout(HZ / 10);
cur |= CRVML_PANEL_ON;
outl(cur, addr);
}
/* Power up LVDS controller */
if (!(cur & CRVML_LVDS_ON)) {
schedule_timeout(HZ / 10);
outl(cur | CRVML_LVDS_ON, addr);
}
}
static void cr_panel_off(void)
{
u32 addr = gpio_bar + CRVML_PANEL_PORT;
u32 cur = inl(addr);
/* Power down LVDS controller first to avoid high currents */
if (cur & CRVML_LVDS_ON) {
cur &= ~CRVML_LVDS_ON;
outl(cur, addr);
}
if (cur & CRVML_PANEL_ON) {
schedule_timeout(HZ / 10);
outl(cur & ~CRVML_PANEL_ON, addr);
}
}
static int cr_lcd_set_power(struct lcd_device *ld, int power)
{
if (power == FB_BLANK_UNBLANK)
cr_panel_on();
if (power == FB_BLANK_POWERDOWN)
cr_panel_off();
return 0;
}
static struct lcd_ops cr_lcd_ops = {
.set_power = cr_lcd_set_power,
};
static int cr_backlight_probe(struct platform_device *pdev)
{
backlight: Fix cr_bllcd allocations and error paths After fixing the too small memory allocation in cr_backlight_probe() from drivers/video/backlight/cr_bllcd.c (commit e3bbb3f05339de438faf54124f25c92e6fe4ac2e) I noticed that the Coverity checker also thought there were a few memory leaks in there. I took a closer look and confirmed that there were indeed several leaks. At the start of the function we allocate storage for a 'struct cr_panel' and store the pointer in a variable named 'crp'. Then we call pci_get_device() and pci_read_config_byte() and if either of them fail we return without freeing the memory allocated for the 'struct cr_panel'. These two leaks are easy to fix since we don't even use 'crp' for anything up to this point, so I simply moved the allocation further down in the function so it only happens just before we actually need it. A bit further down we call backlight_device_register() and store the result in 'crp->cr_backlight_device'. In case of error we return 'crp->cr_backlight_device' from the function, thus leaking 'crp' itself. The same thing happens with the call to lcd_device_register(). To fix these two leaks I declare two new pointers to hold the return values, so that in case of error we can return the pointer (as before) but without leaking 'crp'. This version of the patch also adds missing backlight_device_unregister() / lcd_device_unregister() / pci_dev_put() calls to error paths. Thanks to Richard Purdie <rpurdie@rpsys.net> for noticing. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-08-11 09:29:59 +00:00
struct backlight_device *bdp;
struct lcd_device *ldp;
struct cr_panel *crp;
u8 dev_en;
lpc_dev = pci_get_device(PCI_VENDOR_ID_INTEL,
CRVML_DEVICE_LPC, NULL);
if (!lpc_dev) {
printk("INTEL CARILLO RANCH LPC not found.\n");
return -ENODEV;
}
pci_read_config_byte(lpc_dev, CRVML_REG_GPIOEN, &dev_en);
if (!(dev_en & CRVML_GPIOEN_BIT)) {
printk(KERN_ERR
"Carillo Ranch GPIO device was not enabled.\n");
pci_dev_put(lpc_dev);
return -ENODEV;
}
backlight: Fix cr_bllcd allocations and error paths After fixing the too small memory allocation in cr_backlight_probe() from drivers/video/backlight/cr_bllcd.c (commit e3bbb3f05339de438faf54124f25c92e6fe4ac2e) I noticed that the Coverity checker also thought there were a few memory leaks in there. I took a closer look and confirmed that there were indeed several leaks. At the start of the function we allocate storage for a 'struct cr_panel' and store the pointer in a variable named 'crp'. Then we call pci_get_device() and pci_read_config_byte() and if either of them fail we return without freeing the memory allocated for the 'struct cr_panel'. These two leaks are easy to fix since we don't even use 'crp' for anything up to this point, so I simply moved the allocation further down in the function so it only happens just before we actually need it. A bit further down we call backlight_device_register() and store the result in 'crp->cr_backlight_device'. In case of error we return 'crp->cr_backlight_device' from the function, thus leaking 'crp' itself. The same thing happens with the call to lcd_device_register(). To fix these two leaks I declare two new pointers to hold the return values, so that in case of error we can return the pointer (as before) but without leaking 'crp'. This version of the patch also adds missing backlight_device_unregister() / lcd_device_unregister() / pci_dev_put() calls to error paths. Thanks to Richard Purdie <rpurdie@rpsys.net> for noticing. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-08-11 09:29:59 +00:00
bdp = backlight_device_register("cr-backlight",
&pdev->dev, NULL, &cr_backlight_ops);
if (IS_ERR(bdp)) {
pci_dev_put(lpc_dev);
backlight: Fix cr_bllcd allocations and error paths After fixing the too small memory allocation in cr_backlight_probe() from drivers/video/backlight/cr_bllcd.c (commit e3bbb3f05339de438faf54124f25c92e6fe4ac2e) I noticed that the Coverity checker also thought there were a few memory leaks in there. I took a closer look and confirmed that there were indeed several leaks. At the start of the function we allocate storage for a 'struct cr_panel' and store the pointer in a variable named 'crp'. Then we call pci_get_device() and pci_read_config_byte() and if either of them fail we return without freeing the memory allocated for the 'struct cr_panel'. These two leaks are easy to fix since we don't even use 'crp' for anything up to this point, so I simply moved the allocation further down in the function so it only happens just before we actually need it. A bit further down we call backlight_device_register() and store the result in 'crp->cr_backlight_device'. In case of error we return 'crp->cr_backlight_device' from the function, thus leaking 'crp' itself. The same thing happens with the call to lcd_device_register(). To fix these two leaks I declare two new pointers to hold the return values, so that in case of error we can return the pointer (as before) but without leaking 'crp'. This version of the patch also adds missing backlight_device_unregister() / lcd_device_unregister() / pci_dev_put() calls to error paths. Thanks to Richard Purdie <rpurdie@rpsys.net> for noticing. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-08-11 09:29:59 +00:00
return PTR_ERR(bdp);
}
backlight: Fix cr_bllcd allocations and error paths After fixing the too small memory allocation in cr_backlight_probe() from drivers/video/backlight/cr_bllcd.c (commit e3bbb3f05339de438faf54124f25c92e6fe4ac2e) I noticed that the Coverity checker also thought there were a few memory leaks in there. I took a closer look and confirmed that there were indeed several leaks. At the start of the function we allocate storage for a 'struct cr_panel' and store the pointer in a variable named 'crp'. Then we call pci_get_device() and pci_read_config_byte() and if either of them fail we return without freeing the memory allocated for the 'struct cr_panel'. These two leaks are easy to fix since we don't even use 'crp' for anything up to this point, so I simply moved the allocation further down in the function so it only happens just before we actually need it. A bit further down we call backlight_device_register() and store the result in 'crp->cr_backlight_device'. In case of error we return 'crp->cr_backlight_device' from the function, thus leaking 'crp' itself. The same thing happens with the call to lcd_device_register(). To fix these two leaks I declare two new pointers to hold the return values, so that in case of error we can return the pointer (as before) but without leaking 'crp'. This version of the patch also adds missing backlight_device_unregister() / lcd_device_unregister() / pci_dev_put() calls to error paths. Thanks to Richard Purdie <rpurdie@rpsys.net> for noticing. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-08-11 09:29:59 +00:00
ldp = lcd_device_register("cr-lcd", &pdev->dev, NULL, &cr_lcd_ops);
if (IS_ERR(ldp)) {
backlight_device_unregister(bdp);
pci_dev_put(lpc_dev);
backlight: Fix cr_bllcd allocations and error paths After fixing the too small memory allocation in cr_backlight_probe() from drivers/video/backlight/cr_bllcd.c (commit e3bbb3f05339de438faf54124f25c92e6fe4ac2e) I noticed that the Coverity checker also thought there were a few memory leaks in there. I took a closer look and confirmed that there were indeed several leaks. At the start of the function we allocate storage for a 'struct cr_panel' and store the pointer in a variable named 'crp'. Then we call pci_get_device() and pci_read_config_byte() and if either of them fail we return without freeing the memory allocated for the 'struct cr_panel'. These two leaks are easy to fix since we don't even use 'crp' for anything up to this point, so I simply moved the allocation further down in the function so it only happens just before we actually need it. A bit further down we call backlight_device_register() and store the result in 'crp->cr_backlight_device'. In case of error we return 'crp->cr_backlight_device' from the function, thus leaking 'crp' itself. The same thing happens with the call to lcd_device_register(). To fix these two leaks I declare two new pointers to hold the return values, so that in case of error we can return the pointer (as before) but without leaking 'crp'. This version of the patch also adds missing backlight_device_unregister() / lcd_device_unregister() / pci_dev_put() calls to error paths. Thanks to Richard Purdie <rpurdie@rpsys.net> for noticing. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-08-11 09:29:59 +00:00
return PTR_ERR(bdp);
}
pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR,
&gpio_bar);
gpio_bar &= ~0x3F;
backlight: Fix cr_bllcd allocations and error paths After fixing the too small memory allocation in cr_backlight_probe() from drivers/video/backlight/cr_bllcd.c (commit e3bbb3f05339de438faf54124f25c92e6fe4ac2e) I noticed that the Coverity checker also thought there were a few memory leaks in there. I took a closer look and confirmed that there were indeed several leaks. At the start of the function we allocate storage for a 'struct cr_panel' and store the pointer in a variable named 'crp'. Then we call pci_get_device() and pci_read_config_byte() and if either of them fail we return without freeing the memory allocated for the 'struct cr_panel'. These two leaks are easy to fix since we don't even use 'crp' for anything up to this point, so I simply moved the allocation further down in the function so it only happens just before we actually need it. A bit further down we call backlight_device_register() and store the result in 'crp->cr_backlight_device'. In case of error we return 'crp->cr_backlight_device' from the function, thus leaking 'crp' itself. The same thing happens with the call to lcd_device_register(). To fix these two leaks I declare two new pointers to hold the return values, so that in case of error we can return the pointer (as before) but without leaking 'crp'. This version of the patch also adds missing backlight_device_unregister() / lcd_device_unregister() / pci_dev_put() calls to error paths. Thanks to Richard Purdie <rpurdie@rpsys.net> for noticing. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-08-11 09:29:59 +00:00
crp = kzalloc(sizeof(*crp), GFP_KERNEL);
if (!crp) {
lcd_device_unregister(ldp);
backlight_device_unregister(bdp);
pci_dev_put(lpc_dev);
return -ENOMEM;
}
crp->cr_backlight_device = bdp;
crp->cr_lcd_device = ldp;
crp->cr_backlight_device->props.power = FB_BLANK_UNBLANK;
crp->cr_backlight_device->props.brightness = 0;
crp->cr_backlight_device->props.max_brightness = 0;
cr_backlight_set_intensity(crp->cr_backlight_device);
cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_UNBLANK);
platform_set_drvdata(pdev, crp);
return 0;
}
static int cr_backlight_remove(struct platform_device *pdev)
{
struct cr_panel *crp = platform_get_drvdata(pdev);
crp->cr_backlight_device->props.power = FB_BLANK_POWERDOWN;
crp->cr_backlight_device->props.brightness = 0;
crp->cr_backlight_device->props.max_brightness = 0;
cr_backlight_set_intensity(crp->cr_backlight_device);
cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_POWERDOWN);
backlight_device_unregister(crp->cr_backlight_device);
lcd_device_unregister(crp->cr_lcd_device);
pci_dev_put(lpc_dev);
return 0;
}
static struct platform_driver cr_backlight_driver = {
.probe = cr_backlight_probe,
.remove = cr_backlight_remove,
.driver = {
.name = "cr_backlight",
},
};
static struct platform_device *crp;
static int __init cr_backlight_init(void)
{
int ret = platform_driver_register(&cr_backlight_driver);
if (ret)
return ret;
crp = platform_device_register_simple("cr_backlight", -1, NULL, 0);
if (IS_ERR(crp)) {
platform_driver_unregister(&cr_backlight_driver);
return PTR_ERR(crp);
}
printk("Carillo Ranch Backlight Driver Initialized.\n");
return 0;
}
static void __exit cr_backlight_exit(void)
{
platform_device_unregister(crp);
platform_driver_unregister(&cr_backlight_driver);
}
module_init(cr_backlight_init);
module_exit(cr_backlight_exit);
MODULE_AUTHOR("Tungsten Graphics Inc.");
MODULE_DESCRIPTION("Carillo Ranch Backlight Driver");
MODULE_LICENSE("GPL");