linux/drivers/s390/block/dasd_erp.c

185 lines
4.8 KiB
C
Raw Normal View History

/*
* File...........: linux/drivers/s390/block/dasd.c
* Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
* Horst Hummel <Horst.Hummel@de.ibm.com>
* Carsten Otte <Cotte@de.ibm.com>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999-2001
*
*/
#define KMSG_COMPONENT "dasd"
#include <linux/ctype.h>
#include <linux/init.h>
#include <asm/debug.h>
#include <asm/ebcdic.h>
#include <asm/uaccess.h>
/* This is ugly... */
#define PRINTK_HEADER "dasd_erp:"
#include "dasd_int.h"
struct dasd_ccw_req *
dasd_alloc_erp_request(char *magic, int cplength, int datasize,
struct dasd_device * device)
{
unsigned long flags;
struct dasd_ccw_req *cqr;
char *data;
int size;
/* Sanity checks */
BUG_ON( magic == NULL || datasize > PAGE_SIZE ||
(cplength*sizeof(struct ccw1)) > PAGE_SIZE);
size = (sizeof(struct dasd_ccw_req) + 7L) & -8L;
if (cplength > 0)
size += cplength * sizeof(struct ccw1);
if (datasize > 0)
size += datasize;
spin_lock_irqsave(&device->mem_lock, flags);
cqr = (struct dasd_ccw_req *)
dasd_alloc_chunk(&device->erp_chunks, size);
spin_unlock_irqrestore(&device->mem_lock, flags);
if (cqr == NULL)
return ERR_PTR(-ENOMEM);
memset(cqr, 0, sizeof(struct dasd_ccw_req));
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 13:11:23 +00:00
INIT_LIST_HEAD(&cqr->devlist);
INIT_LIST_HEAD(&cqr->blocklist);
data = (char *) cqr + ((sizeof(struct dasd_ccw_req) + 7L) & -8L);
cqr->cpaddr = NULL;
if (cplength > 0) {
cqr->cpaddr = (struct ccw1 *) data;
data += cplength*sizeof(struct ccw1);
memset(cqr->cpaddr, 0, cplength*sizeof(struct ccw1));
}
cqr->data = NULL;
if (datasize > 0) {
cqr->data = data;
memset(cqr->data, 0, datasize);
}
strncpy((char *) &cqr->magic, magic, 4);
ASCEBC((char *) &cqr->magic, 4);
set_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
dasd_get_device(device);
return cqr;
}
void
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 13:11:23 +00:00
dasd_free_erp_request(struct dasd_ccw_req *cqr, struct dasd_device * device)
{
unsigned long flags;
spin_lock_irqsave(&device->mem_lock, flags);
dasd_free_chunk(&device->erp_chunks, cqr);
spin_unlock_irqrestore(&device->mem_lock, flags);
atomic_dec(&device->ref_count);
}
/*
* dasd_default_erp_action just retries the current cqr
*/
struct dasd_ccw_req *
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 13:11:23 +00:00
dasd_default_erp_action(struct dasd_ccw_req *cqr)
{
struct dasd_device *device;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 13:11:23 +00:00
device = cqr->startdev;
/* just retry - there is nothing to save ... I got no sense data.... */
if (cqr->retries > 0) {
DBF_DEV_EVENT(DBF_DEBUG, device,
"default ERP called (%i retries left)",
cqr->retries);
cqr->lpm = LPM_ANYPATH;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 13:11:23 +00:00
cqr->status = DASD_CQR_FILLED;
} else {
pr_err("%s: default ERP has run out of retries and failed\n",
dev_name(&device->cdev->dev));
cqr->status = DASD_CQR_FAILED;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 13:11:23 +00:00
cqr->stopclk = get_clock();
}
return cqr;
} /* end dasd_default_erp_action */
/*
* DESCRIPTION
* Frees all ERPs of the current ERP Chain and set the status
* of the original CQR either to DASD_CQR_DONE if ERP was successful
* or to DASD_CQR_FAILED if ERP was NOT successful.
* NOTE: This function is only called if no discipline postaction
* is available
*
* PARAMETER
* erp current erp_head
*
* RETURN VALUES
* cqr pointer to the original CQR
*/
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 13:11:23 +00:00
struct dasd_ccw_req *dasd_default_erp_postaction(struct dasd_ccw_req *cqr)
{
int success;
BUG_ON(cqr->refers == NULL || cqr->function == NULL);
success = cqr->status == DASD_CQR_DONE;
/* free all ERPs - but NOT the original cqr */
while (cqr->refers != NULL) {
struct dasd_ccw_req *refers;
refers = cqr->refers;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 13:11:23 +00:00
/* remove the request from the block queue */
list_del(&cqr->blocklist);
/* free the finished erp request */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 13:11:23 +00:00
dasd_free_erp_request(cqr, cqr->memdev);
cqr = refers;
}
/* set corresponding status to original cqr */
if (success)
cqr->status = DASD_CQR_DONE;
else {
cqr->status = DASD_CQR_FAILED;
cqr->stopclk = get_clock();
}
return cqr;
} /* end default_erp_postaction */
void
dasd_log_sense(struct dasd_ccw_req *cqr, struct irb *irb)
{
struct dasd_device *device;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 13:11:23 +00:00
device = cqr->startdev;
/* dump sense data */
if (device->discipline && device->discipline->dump_sense)
device->discipline->dump_sense(device, cqr, irb);
}
void
dasd_log_sense_dbf(struct dasd_ccw_req *cqr, struct irb *irb)
{
struct dasd_device *device;
device = cqr->startdev;
/* dump sense data to s390 debugfeature*/
if (device->discipline && device->discipline->dump_sense_dbf)
device->discipline->dump_sense_dbf(device, irb, "log");
}
EXPORT_SYMBOL(dasd_log_sense_dbf);
EXPORT_SYMBOL(dasd_default_erp_action);
EXPORT_SYMBOL(dasd_default_erp_postaction);
EXPORT_SYMBOL(dasd_alloc_erp_request);
EXPORT_SYMBOL(dasd_free_erp_request);
EXPORT_SYMBOL(dasd_log_sense);