linux/drivers/ata/sata_vsc.c

482 lines
13 KiB
C
Raw Normal View History

/*
* sata_vsc.c - Vitesse VSC7174 4 port DPA SATA
*
* Maintained by: Jeremy Higdon @ SGI
* Please ALWAYS copy linux-ide@vger.kernel.org
* on emails.
*
* Copyright 2004 SGI
*
* Bits from Jeff Garzik, Copyright RedHat, Inc.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* libata documentation is available via 'make {ps|pdf}docs',
* as Documentation/DocBook/libata.*
*
* Vitesse hardware documentation presumably available under NDA.
* Intel 31244 (same hardware interface) documentation presumably
* available from http://developer.intel.com/
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#define DRV_NAME "sata_vsc"
#define DRV_VERSION "2.2"
enum {
VSC_MMIO_BAR = 0,
/* Interrupt register offsets (from chip base address) */
VSC_SATA_INT_STAT_OFFSET = 0x00,
VSC_SATA_INT_MASK_OFFSET = 0x04,
/* Taskfile registers offsets */
VSC_SATA_TF_CMD_OFFSET = 0x00,
VSC_SATA_TF_DATA_OFFSET = 0x00,
VSC_SATA_TF_ERROR_OFFSET = 0x04,
VSC_SATA_TF_FEATURE_OFFSET = 0x06,
VSC_SATA_TF_NSECT_OFFSET = 0x08,
VSC_SATA_TF_LBAL_OFFSET = 0x0c,
VSC_SATA_TF_LBAM_OFFSET = 0x10,
VSC_SATA_TF_LBAH_OFFSET = 0x14,
VSC_SATA_TF_DEVICE_OFFSET = 0x18,
VSC_SATA_TF_STATUS_OFFSET = 0x1c,
VSC_SATA_TF_COMMAND_OFFSET = 0x1d,
VSC_SATA_TF_ALTSTATUS_OFFSET = 0x28,
VSC_SATA_TF_CTL_OFFSET = 0x29,
/* DMA base */
VSC_SATA_UP_DESCRIPTOR_OFFSET = 0x64,
VSC_SATA_UP_DATA_BUFFER_OFFSET = 0x6C,
VSC_SATA_DMA_CMD_OFFSET = 0x70,
/* SCRs base */
VSC_SATA_SCR_STATUS_OFFSET = 0x100,
VSC_SATA_SCR_ERROR_OFFSET = 0x104,
VSC_SATA_SCR_CONTROL_OFFSET = 0x108,
/* Port stride */
VSC_SATA_PORT_OFFSET = 0x200,
/* Error interrupt status bit offsets */
VSC_SATA_INT_ERROR_CRC = 0x40,
VSC_SATA_INT_ERROR_T = 0x20,
VSC_SATA_INT_ERROR_P = 0x10,
VSC_SATA_INT_ERROR_R = 0x8,
VSC_SATA_INT_ERROR_E = 0x4,
VSC_SATA_INT_ERROR_M = 0x2,
VSC_SATA_INT_PHY_CHANGE = 0x1,
VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC | VSC_SATA_INT_ERROR_T | \
VSC_SATA_INT_ERROR_P | VSC_SATA_INT_ERROR_R | \
VSC_SATA_INT_ERROR_E | VSC_SATA_INT_ERROR_M | \
VSC_SATA_INT_PHY_CHANGE),
};
static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
if (sc_reg > SCR_CONTROL)
return 0xffffffffU;
return readl(ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
u32 val)
{
if (sc_reg > SCR_CONTROL)
return;
writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void vsc_freeze(struct ata_port *ap)
{
void __iomem *mask_addr;
mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
VSC_SATA_INT_MASK_OFFSET + ap->port_no;
writeb(0, mask_addr);
}
static void vsc_thaw(struct ata_port *ap)
{
void __iomem *mask_addr;
mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
VSC_SATA_INT_MASK_OFFSET + ap->port_no;
writeb(0xff, mask_addr);
}
static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
{
void __iomem *mask_addr;
u8 mask;
mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
VSC_SATA_INT_MASK_OFFSET + ap->port_no;
mask = readb(mask_addr);
if (ctl & ATA_NIEN)
mask |= 0x80;
else
mask &= 0x7F;
writeb(mask, mask_addr);
}
static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
/*
* The only thing the ctl register is used for is SRST.
* That is not enabled or disabled via tf_load.
* However, if ATA_NIEN is changed, then we need to change the interrupt register.
*/
if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
ap->last_ctl = tf->ctl;
vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN);
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
writew(tf->feature | (((u16)tf->hob_feature) << 8),
ioaddr->feature_addr);
writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
ioaddr->nsect_addr);
writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
ioaddr->lbal_addr);
writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
ioaddr->lbam_addr);
writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
ioaddr->lbah_addr);
} else if (is_addr) {
writew(tf->feature, ioaddr->feature_addr);
writew(tf->nsect, ioaddr->nsect_addr);
writew(tf->lbal, ioaddr->lbal_addr);
writew(tf->lbam, ioaddr->lbam_addr);
writew(tf->lbah, ioaddr->lbah_addr);
}
if (tf->flags & ATA_TFLAG_DEVICE)
writeb(tf->device, ioaddr->device_addr);
ata_wait_idle(ap);
}
static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
u16 nsect, lbal, lbam, lbah, feature;
tf->command = ata_check_status(ap);
tf->device = readw(ioaddr->device_addr);
feature = readw(ioaddr->error_addr);
nsect = readw(ioaddr->nsect_addr);
lbal = readw(ioaddr->lbal_addr);
lbam = readw(ioaddr->lbam_addr);
lbah = readw(ioaddr->lbah_addr);
tf->feature = feature;
tf->nsect = nsect;
tf->lbal = lbal;
tf->lbam = lbam;
tf->lbah = lbah;
if (tf->flags & ATA_TFLAG_LBA48) {
tf->hob_feature = feature >> 8;
tf->hob_nsect = nsect >> 8;
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
tf->hob_lbah = lbah >> 8;
}
}
static inline void vsc_error_intr(u8 port_status, struct ata_port *ap)
{
if (port_status & (VSC_SATA_INT_PHY_CHANGE | VSC_SATA_INT_ERROR_M))
ata_port_freeze(ap);
else
ata_port_abort(ap);
}
static void vsc_port_intr(u8 port_status, struct ata_port *ap)
{
struct ata_queued_cmd *qc;
int handled = 0;
if (unlikely(port_status & VSC_SATA_INT_ERROR)) {
vsc_error_intr(port_status, ap);
return;
}
qc = ata_qc_from_tag(ap, ap->active_tag);
if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
handled = ata_host_intr(ap, qc);
/* We received an interrupt during a polled command,
* or some other spurious condition. Interrupt reporting
* with this hardware is fairly reliable so it is safe to
* simply clear the interrupt
*/
if (unlikely(!handled))
ata_chk_status(ap);
}
/*
* vsc_sata_interrupt
*
* Read the interrupt register and process for the devices that have them pending.
*/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
unsigned int i;
unsigned int handled = 0;
u32 status;
status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET);
if (unlikely(status == 0xffffffff || status == 0)) {
if (status)
dev_printk(KERN_ERR, host->dev,
": IRQ status == 0xffffffff, "
"PCI fault or device removal?\n");
goto out;
}
spin_lock(&host->lock);
for (i = 0; i < host->n_ports; i++) {
u8 port_status = (status >> (8 * i)) & 0xff;
if (port_status) {
struct ata_port *ap = host->ports[i];
if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
vsc_port_intr(port_status, ap);
handled++;
} else
dev_printk(KERN_ERR, host->dev,
": interrupt from disabled port %d\n", i);
}
}
spin_unlock(&host->lock);
out:
return IRQ_RETVAL(handled);
}
static struct scsi_host_template vsc_sata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static const struct ata_port_operations vsc_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = vsc_sata_tf_load,
.tf_read = vsc_sata_tf_read,
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = vsc_freeze,
.thaw = vsc_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
.scr_read = vsc_sata_scr_read,
.scr_write = vsc_sata_scr_write,
.port_start = ata_port_start,
};
static void __devinit vsc_sata_setup_port(struct ata_ioports *port,
void __iomem *base)
{
port->cmd_addr = base + VSC_SATA_TF_CMD_OFFSET;
port->data_addr = base + VSC_SATA_TF_DATA_OFFSET;
port->error_addr = base + VSC_SATA_TF_ERROR_OFFSET;
port->feature_addr = base + VSC_SATA_TF_FEATURE_OFFSET;
port->nsect_addr = base + VSC_SATA_TF_NSECT_OFFSET;
port->lbal_addr = base + VSC_SATA_TF_LBAL_OFFSET;
port->lbam_addr = base + VSC_SATA_TF_LBAM_OFFSET;
port->lbah_addr = base + VSC_SATA_TF_LBAH_OFFSET;
port->device_addr = base + VSC_SATA_TF_DEVICE_OFFSET;
port->status_addr = base + VSC_SATA_TF_STATUS_OFFSET;
port->command_addr = base + VSC_SATA_TF_COMMAND_OFFSET;
port->altstatus_addr = base + VSC_SATA_TF_ALTSTATUS_OFFSET;
port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET;
port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET;
port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET;
writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
}
static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static const struct ata_port_info pi = {
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = 0x7f,
.port_ops = &vsc_sata_ops,
};
const struct ata_port_info *ppi[] = { &pi, NULL };
static int printed_version;
struct ata_host *host;
void __iomem *mmio_base;
int i, rc;
u8 cls;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
/* allocate host */
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4);
if (!host)
return -ENOMEM;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* check if we have needed resource mapped */
if (pci_resource_len(pdev, 0) == 0)
return -ENODEV;
/* map IO regions and intialize host accordingly */
rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME);
if (rc == -EBUSY)
pcim_pin_device(pdev);
if (rc)
return rc;
host->iomap = pcim_iomap_table(pdev);
mmio_base = host->iomap[VSC_MMIO_BAR];
for (i = 0; i < host->n_ports; i++)
vsc_sata_setup_port(&host->ports[i]->ioaddr,
mmio_base + (i + 1) * VSC_SATA_PORT_OFFSET);
/*
* Use 32 bit DMA mask, because 64 bit address support is poor.
*/
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc)
return rc;
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc)
return rc;
/*
* Due to a bug in the chip, the default cache line size can't be
* used (unless the default is non-zero).
*/
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cls);
if (cls == 0x00)
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
if (pci_enable_msi(pdev) == 0)
pci_intx(pdev, 0);
/*
* Config offset 0x98 is "Extended Control and Status Register 0"
* Default value is (1 << 28). All bits except bit 28 are reserved in
* DPA mode. If bit 28 is set, LED 0 reflects all ports' activity.
* If bit 28 is clear, each port has its own LED.
*/
pci_write_config_dword(pdev, 0x98, 0);
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, vsc_sata_interrupt,
IRQF_SHARED, &vsc_sata_sht);
}
static const struct pci_device_id vsc_sata_pci_tbl[] = {
{ PCI_VENDOR_ID_VITESSE, 0x7174,
PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
{ PCI_VENDOR_ID_INTEL, 0x3200,
PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
{ } /* terminate list */
};
static struct pci_driver vsc_sata_pci_driver = {
.name = DRV_NAME,
.id_table = vsc_sata_pci_tbl,
.probe = vsc_sata_init_one,
.remove = ata_pci_remove_one,
};
static int __init vsc_sata_init(void)
{
return pci_register_driver(&vsc_sata_pci_driver);
}
static void __exit vsc_sata_exit(void)
{
pci_unregister_driver(&vsc_sata_pci_driver);
}
MODULE_AUTHOR("Jeremy Higdon");
MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl);
MODULE_VERSION(DRV_VERSION);
module_init(vsc_sata_init);
module_exit(vsc_sata_exit);