linux/drivers/edac/i5100_edac.c

850 lines
23 KiB
C
Raw Normal View History

edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 08:49:04 +00:00
/*
* Intel 5100 Memory Controllers kernel module
*
* This file may be distributed under the terms of the
* GNU General Public License.
*
* This module is based on the following document:
*
* Intel 5100X Chipset Memory Controller Hub (MCH) - Datasheet
* http://download.intel.com/design/chipsets/datashts/318378.pdf
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/slab.h>
#include <linux/edac.h>
#include <linux/delay.h>
#include <linux/mmzone.h>
#include "edac_core.h"
/* register addresses and bit field accessors... */
/* device 16, func 1 */
#define I5100_MC 0x40 /* Memory Control Register */
#define I5100_MC_ERRDETEN(a) ((a) >> 5 & 1)
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 08:49:04 +00:00
#define I5100_MS 0x44 /* Memory Status Register */
#define I5100_SPDDATA 0x48 /* Serial Presence Detect Status Reg */
#define I5100_SPDDATA_RDO(a) ((a) >> 15 & 1)
#define I5100_SPDDATA_SBE(a) ((a) >> 13 & 1)
#define I5100_SPDDATA_BUSY(a) ((a) >> 12 & 1)
#define I5100_SPDDATA_DATA(a) ((a) & ((1 << 8) - 1))
#define I5100_SPDCMD 0x4c /* Serial Presence Detect Command Reg */
#define I5100_SPDCMD_DTI(a) (((a) & ((1 << 4) - 1)) << 28)
#define I5100_SPDCMD_CKOVRD(a) (((a) & 1) << 27)
#define I5100_SPDCMD_SA(a) (((a) & ((1 << 3) - 1)) << 24)
#define I5100_SPDCMD_BA(a) (((a) & ((1 << 8) - 1)) << 16)
#define I5100_SPDCMD_DATA(a) (((a) & ((1 << 8) - 1)) << 8)
#define I5100_SPDCMD_CMD(a) ((a) & 1)
#define I5100_TOLM 0x6c /* Top of Low Memory */
#define I5100_TOLM_TOLM(a) ((a) >> 12 & ((1 << 4) - 1))
#define I5100_MIR0 0x80 /* Memory Interleave Range 0 */
#define I5100_MIR1 0x84 /* Memory Interleave Range 1 */
#define I5100_AMIR_0 0x8c /* Adjusted Memory Interleave Range 0 */
#define I5100_AMIR_1 0x90 /* Adjusted Memory Interleave Range 1 */
#define I5100_MIR_LIMIT(a) ((a) >> 4 & ((1 << 12) - 1))
#define I5100_MIR_WAY1(a) ((a) >> 1 & 1)
#define I5100_MIR_WAY0(a) ((a) & 1)
#define I5100_FERR_NF_MEM 0xa0 /* MC First Non Fatal Errors */
#define I5100_FERR_NF_MEM_CHAN_INDX(a) ((a) >> 28 & 1)
#define I5100_FERR_NF_MEM_SPD_MASK (1 << 18)
#define I5100_FERR_NF_MEM_M16ERR_MASK (1 << 16)
#define I5100_FERR_NF_MEM_M15ERR_MASK (1 << 15)
#define I5100_FERR_NF_MEM_M14ERR_MASK (1 << 14)
#define I5100_FERR_NF_MEM_M12ERR_MASK (1 << 12)
#define I5100_FERR_NF_MEM_M11ERR_MASK (1 << 11)
#define I5100_FERR_NF_MEM_M10ERR_MASK (1 << 10)
#define I5100_FERR_NF_MEM_M6ERR_MASK (1 << 6)
#define I5100_FERR_NF_MEM_M5ERR_MASK (1 << 5)
#define I5100_FERR_NF_MEM_M4ERR_MASK (1 << 4)
#define I5100_FERR_NF_MEM_M1ERR_MASK 1
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 08:49:04 +00:00
#define I5100_FERR_NF_MEM_ANY_MASK \
(I5100_FERR_NF_MEM_M16ERR_MASK | \
I5100_FERR_NF_MEM_M15ERR_MASK | \
I5100_FERR_NF_MEM_M14ERR_MASK | \
I5100_FERR_NF_MEM_M12ERR_MASK | \
I5100_FERR_NF_MEM_M11ERR_MASK | \
I5100_FERR_NF_MEM_M10ERR_MASK | \
I5100_FERR_NF_MEM_M6ERR_MASK | \
I5100_FERR_NF_MEM_M5ERR_MASK | \
I5100_FERR_NF_MEM_M4ERR_MASK | \
I5100_FERR_NF_MEM_M1ERR_MASK)
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 08:49:04 +00:00
#define I5100_FERR_NF_MEM_ANY(a) ((a) & I5100_FERR_NF_MEM_ANY_MASK)
#define I5100_NERR_NF_MEM 0xa4 /* MC Next Non-Fatal Errors */
#define I5100_NERR_NF_MEM_ANY(a) I5100_FERR_NF_MEM_ANY(a)
/* device 21 and 22, func 0 */
#define I5100_MTR_0 0x154 /* Memory Technology Registers 0-3 */
#define I5100_DMIR 0x15c /* DIMM Interleave Range */
#define I5100_DMIR_LIMIT(a) ((a) >> 16 & ((1 << 11) - 1))
#define I5100_DMIR_RANK(a, i) ((a) >> (4 * i) & ((1 << 2) - 1))
#define I5100_MTR_4 0x1b0 /* Memory Technology Registers 4,5 */
#define I5100_MTR_PRESENT(a) ((a) >> 10 & 1)
#define I5100_MTR_ETHROTTLE(a) ((a) >> 9 & 1)
#define I5100_MTR_WIDTH(a) ((a) >> 8 & 1)
#define I5100_MTR_NUMBANK(a) ((a) >> 6 & 1)
#define I5100_MTR_NUMROW(a) ((a) >> 2 & ((1 << 2) - 1))
#define I5100_MTR_NUMCOL(a) ((a) & ((1 << 2) - 1))
#define I5100_VALIDLOG 0x18c /* Valid Log Markers */
#define I5100_VALIDLOG_REDMEMVALID(a) ((a) >> 2 & 1)
#define I5100_VALIDLOG_RECMEMVALID(a) ((a) >> 1 & 1)
#define I5100_VALIDLOG_NRECMEMVALID(a) ((a) & 1)
#define I5100_NRECMEMA 0x190 /* Non-Recoverable Memory Error Log Reg A */
#define I5100_NRECMEMA_MERR(a) ((a) >> 15 & ((1 << 5) - 1))
#define I5100_NRECMEMA_BANK(a) ((a) >> 12 & ((1 << 3) - 1))
#define I5100_NRECMEMA_RANK(a) ((a) >> 8 & ((1 << 3) - 1))
#define I5100_NRECMEMA_DM_BUF_ID(a) ((a) & ((1 << 8) - 1))
#define I5100_NRECMEMB 0x194 /* Non-Recoverable Memory Error Log Reg B */
#define I5100_NRECMEMB_CAS(a) ((a) >> 16 & ((1 << 13) - 1))
#define I5100_NRECMEMB_RAS(a) ((a) & ((1 << 16) - 1))
#define I5100_REDMEMA 0x198 /* Recoverable Memory Data Error Log Reg A */
#define I5100_REDMEMA_SYNDROME(a) (a)
#define I5100_REDMEMB 0x19c /* Recoverable Memory Data Error Log Reg B */
#define I5100_REDMEMB_ECC_LOCATOR(a) ((a) & ((1 << 18) - 1))
#define I5100_RECMEMA 0x1a0 /* Recoverable Memory Error Log Reg A */
#define I5100_RECMEMA_MERR(a) I5100_NRECMEMA_MERR(a)
#define I5100_RECMEMA_BANK(a) I5100_NRECMEMA_BANK(a)
#define I5100_RECMEMA_RANK(a) I5100_NRECMEMA_RANK(a)
#define I5100_RECMEMA_DM_BUF_ID(a) I5100_NRECMEMA_DM_BUF_ID(a)
#define I5100_RECMEMB 0x1a4 /* Recoverable Memory Error Log Reg B */
#define I5100_RECMEMB_CAS(a) I5100_NRECMEMB_CAS(a)
#define I5100_RECMEMB_RAS(a) I5100_NRECMEMB_RAS(a)
/* some generic limits */
#define I5100_MAX_RANKS_PER_CTLR 6
#define I5100_MAX_CTLRS 2
#define I5100_MAX_RANKS_PER_DIMM 4
#define I5100_DIMM_ADDR_LINES (6 - 3) /* 64 bits / 8 bits per byte */
#define I5100_MAX_DIMM_SLOTS_PER_CTLR 4
#define I5100_MAX_RANK_INTERLEAVE 4
#define I5100_MAX_DMIRS 5
struct i5100_priv {
/* ranks on each dimm -- 0 maps to not present -- obtained via SPD */
int dimm_numrank[I5100_MAX_CTLRS][I5100_MAX_DIMM_SLOTS_PER_CTLR];
/*
* mainboard chip select map -- maps i5100 chip selects to
* DIMM slot chip selects. In the case of only 4 ranks per
* controller, the mapping is fairly obvious but not unique.
* we map -1 -> NC and assume both controllers use the same
* map...
*
*/
int dimm_csmap[I5100_MAX_DIMM_SLOTS_PER_CTLR][I5100_MAX_RANKS_PER_DIMM];
/* memory interleave range */
struct {
u64 limit;
unsigned way[2];
} mir[I5100_MAX_CTLRS];
/* adjusted memory interleave range register */
unsigned amir[I5100_MAX_CTLRS];
/* dimm interleave range */
struct {
unsigned rank[I5100_MAX_RANK_INTERLEAVE];
u64 limit;
} dmir[I5100_MAX_CTLRS][I5100_MAX_DMIRS];
/* memory technology registers... */
struct {
unsigned present; /* 0 or 1 */
unsigned ethrottle; /* 0 or 1 */
unsigned width; /* 4 or 8 bits */
unsigned numbank; /* 2 or 3 lines */
unsigned numrow; /* 13 .. 16 lines */
unsigned numcol; /* 11 .. 12 lines */
} mtr[I5100_MAX_CTLRS][I5100_MAX_RANKS_PER_CTLR];
u64 tolm; /* top of low memory in bytes */
unsigned ranksperctlr; /* number of ranks per controller */
struct pci_dev *mc; /* device 16 func 1 */
struct pci_dev *ch0mm; /* device 21 func 0 */
struct pci_dev *ch1mm; /* device 22 func 0 */
};
/* map a rank/ctlr to a slot number on the mainboard */
static int i5100_rank_to_slot(const struct mem_ctl_info *mci,
int ctlr, int rank)
{
const struct i5100_priv *priv = mci->pvt_info;
int i;
for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CTLR; i++) {
int j;
const int numrank = priv->dimm_numrank[ctlr][i];
for (j = 0; j < numrank; j++)
if (priv->dimm_csmap[i][j] == rank)
return i * 2 + ctlr;
}
return -1;
}
/*
* The processor bus memory addresses are broken into three
* pieces, whereas the controller addresses are contiguous.
*
* here we map from the controller address space to the
* processor address space:
*
* Processor Address Space
* +-----------------------------+
* | |
* | "high" memory addresses |
* | |
* +-----------------------------+ <- 4GB on the i5100
* | |
* | other non-memory addresses |
* | |
* +-----------------------------+ <- top of low memory
* | |
* | "low" memory addresses |
* | |
* +-----------------------------+
*/
static unsigned long i5100_ctl_page_to_phys(struct mem_ctl_info *mci,
unsigned long cntlr_addr)
{
const struct i5100_priv *priv = mci->pvt_info;
if (cntlr_addr < priv->tolm)
return cntlr_addr;
return (1ULL << 32) + (cntlr_addr - priv->tolm);
}
static const char *i5100_err_msg(unsigned err)
{
const char *merrs[] = {
"unknown", /* 0 */
"uncorrectable data ECC on replay", /* 1 */
"unknown", /* 2 */
"unknown", /* 3 */
"aliased uncorrectable demand data ECC", /* 4 */
"aliased uncorrectable spare-copy data ECC", /* 5 */
"aliased uncorrectable patrol data ECC", /* 6 */
"unknown", /* 7 */
"unknown", /* 8 */
"unknown", /* 9 */
"non-aliased uncorrectable demand data ECC", /* 10 */
"non-aliased uncorrectable spare-copy data ECC", /* 11 */
"non-aliased uncorrectable patrol data ECC", /* 12 */
"unknown", /* 13 */
"correctable demand data ECC", /* 14 */
"correctable spare-copy data ECC", /* 15 */
"correctable patrol data ECC", /* 16 */
"unknown", /* 17 */
"SPD protocol error", /* 18 */
"unknown", /* 19 */
"spare copy initiated", /* 20 */
"spare copy completed", /* 21 */
};
unsigned i;
for (i = 0; i < ARRAY_SIZE(merrs); i++)
if (1 << i & err)
return merrs[i];
return "none";
}
/* convert csrow index into a rank (per controller -- 0..5) */
static int i5100_csrow_to_rank(const struct mem_ctl_info *mci, int csrow)
{
const struct i5100_priv *priv = mci->pvt_info;
return csrow % priv->ranksperctlr;
}
/* convert csrow index into a controller (0..1) */
static int i5100_csrow_to_cntlr(const struct mem_ctl_info *mci, int csrow)
{
const struct i5100_priv *priv = mci->pvt_info;
return csrow / priv->ranksperctlr;
}
static unsigned i5100_rank_to_csrow(const struct mem_ctl_info *mci,
int ctlr, int rank)
{
const struct i5100_priv *priv = mci->pvt_info;
return ctlr * priv->ranksperctlr + rank;
}
static void i5100_handle_ce(struct mem_ctl_info *mci,
int ctlr,
unsigned bank,
unsigned rank,
unsigned long syndrome,
unsigned cas,
unsigned ras,
const char *msg)
{
const int csrow = i5100_rank_to_csrow(mci, ctlr, rank);
printk(KERN_ERR
"CE ctlr %d, bank %u, rank %u, syndrome 0x%lx, "
"cas %u, ras %u, csrow %u, label \"%s\": %s\n",
ctlr, bank, rank, syndrome, cas, ras,
csrow, mci->csrows[csrow].channels[0].label, msg);
mci->ce_count++;
mci->csrows[csrow].ce_count++;
mci->csrows[csrow].channels[0].ce_count++;
}
static void i5100_handle_ue(struct mem_ctl_info *mci,
int ctlr,
unsigned bank,
unsigned rank,
unsigned long syndrome,
unsigned cas,
unsigned ras,
const char *msg)
{
const int csrow = i5100_rank_to_csrow(mci, ctlr, rank);
printk(KERN_ERR
"UE ctlr %d, bank %u, rank %u, syndrome 0x%lx, "
"cas %u, ras %u, csrow %u, label \"%s\": %s\n",
ctlr, bank, rank, syndrome, cas, ras,
csrow, mci->csrows[csrow].channels[0].label, msg);
mci->ue_count++;
mci->csrows[csrow].ue_count++;
}
static void i5100_read_log(struct mem_ctl_info *mci, int ctlr,
u32 ferr, u32 nerr)
{
struct i5100_priv *priv = mci->pvt_info;
struct pci_dev *pdev = (ctlr) ? priv->ch1mm : priv->ch0mm;
u32 dw;
u32 dw2;
unsigned syndrome = 0;
unsigned ecc_loc = 0;
unsigned merr;
unsigned bank;
unsigned rank;
unsigned cas;
unsigned ras;
pci_read_config_dword(pdev, I5100_VALIDLOG, &dw);
if (I5100_VALIDLOG_REDMEMVALID(dw)) {
pci_read_config_dword(pdev, I5100_REDMEMA, &dw2);
syndrome = I5100_REDMEMA_SYNDROME(dw2);
pci_read_config_dword(pdev, I5100_REDMEMB, &dw2);
ecc_loc = I5100_REDMEMB_ECC_LOCATOR(dw2);
}
if (I5100_VALIDLOG_RECMEMVALID(dw)) {
const char *msg;
pci_read_config_dword(pdev, I5100_RECMEMA, &dw2);
merr = I5100_RECMEMA_MERR(dw2);
bank = I5100_RECMEMA_BANK(dw2);
rank = I5100_RECMEMA_RANK(dw2);
pci_read_config_dword(pdev, I5100_RECMEMB, &dw2);
cas = I5100_RECMEMB_CAS(dw2);
ras = I5100_RECMEMB_RAS(dw2);
/* FIXME: not really sure if this is what merr is...
*/
if (!merr)
msg = i5100_err_msg(ferr);
else
msg = i5100_err_msg(nerr);
i5100_handle_ce(mci, ctlr, bank, rank, syndrome, cas, ras, msg);
}
if (I5100_VALIDLOG_NRECMEMVALID(dw)) {
const char *msg;
pci_read_config_dword(pdev, I5100_NRECMEMA, &dw2);
merr = I5100_NRECMEMA_MERR(dw2);
bank = I5100_NRECMEMA_BANK(dw2);
rank = I5100_NRECMEMA_RANK(dw2);
pci_read_config_dword(pdev, I5100_NRECMEMB, &dw2);
cas = I5100_NRECMEMB_CAS(dw2);
ras = I5100_NRECMEMB_RAS(dw2);
/* FIXME: not really sure if this is what merr is...
*/
if (!merr)
msg = i5100_err_msg(ferr);
else
msg = i5100_err_msg(nerr);
i5100_handle_ue(mci, ctlr, bank, rank, syndrome, cas, ras, msg);
}
pci_write_config_dword(pdev, I5100_VALIDLOG, dw);
}
static void i5100_check_error(struct mem_ctl_info *mci)
{
struct i5100_priv *priv = mci->pvt_info;
u32 dw;
pci_read_config_dword(priv->mc, I5100_FERR_NF_MEM, &dw);
if (I5100_FERR_NF_MEM_ANY(dw)) {
u32 dw2;
pci_read_config_dword(priv->mc, I5100_NERR_NF_MEM, &dw2);
if (dw2)
pci_write_config_dword(priv->mc, I5100_NERR_NF_MEM,
dw2);
pci_write_config_dword(priv->mc, I5100_FERR_NF_MEM, dw);
i5100_read_log(mci, I5100_FERR_NF_MEM_CHAN_INDX(dw),
I5100_FERR_NF_MEM_ANY(dw),
I5100_NERR_NF_MEM_ANY(dw2));
}
}
static struct pci_dev *pci_get_device_func(unsigned vendor,
unsigned device,
unsigned func)
{
struct pci_dev *ret = NULL;
while (1) {
ret = pci_get_device(vendor, device, ret);
if (!ret)
break;
if (PCI_FUNC(ret->devfn) == func)
break;
}
return ret;
}
static unsigned long __devinit i5100_npages(struct mem_ctl_info *mci,
int csrow)
{
struct i5100_priv *priv = mci->pvt_info;
const unsigned ctlr_rank = i5100_csrow_to_rank(mci, csrow);
const unsigned ctlr = i5100_csrow_to_cntlr(mci, csrow);
unsigned addr_lines;
/* dimm present? */
if (!priv->mtr[ctlr][ctlr_rank].present)
return 0ULL;
addr_lines =
I5100_DIMM_ADDR_LINES +
priv->mtr[ctlr][ctlr_rank].numcol +
priv->mtr[ctlr][ctlr_rank].numrow +
priv->mtr[ctlr][ctlr_rank].numbank;
return (unsigned long)
((unsigned long long) (1ULL << addr_lines) / PAGE_SIZE);
}
static void __devinit i5100_init_mtr(struct mem_ctl_info *mci)
{
struct i5100_priv *priv = mci->pvt_info;
struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm };
int i;
for (i = 0; i < I5100_MAX_CTLRS; i++) {
int j;
struct pci_dev *pdev = mms[i];
for (j = 0; j < I5100_MAX_RANKS_PER_CTLR; j++) {
const unsigned addr =
(j < 4) ? I5100_MTR_0 + j * 2 :
I5100_MTR_4 + (j - 4) * 2;
u16 w;
pci_read_config_word(pdev, addr, &w);
priv->mtr[i][j].present = I5100_MTR_PRESENT(w);
priv->mtr[i][j].ethrottle = I5100_MTR_ETHROTTLE(w);
priv->mtr[i][j].width = 4 + 4 * I5100_MTR_WIDTH(w);
priv->mtr[i][j].numbank = 2 + I5100_MTR_NUMBANK(w);
priv->mtr[i][j].numrow = 13 + I5100_MTR_NUMROW(w);
priv->mtr[i][j].numcol = 10 + I5100_MTR_NUMCOL(w);
}
}
}
/*
* FIXME: make this into a real i2c adapter (so that dimm-decode
* will work)?
*/
static int i5100_read_spd_byte(const struct mem_ctl_info *mci,
u8 ch, u8 slot, u8 addr, u8 *byte)
{
struct i5100_priv *priv = mci->pvt_info;
u16 w;
u32 dw;
unsigned long et;
pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
if (I5100_SPDDATA_BUSY(w))
return -1;
dw = I5100_SPDCMD_DTI(0xa) |
I5100_SPDCMD_CKOVRD(1) |
I5100_SPDCMD_SA(ch * 4 + slot) |
I5100_SPDCMD_BA(addr) |
I5100_SPDCMD_DATA(0) |
I5100_SPDCMD_CMD(0);
pci_write_config_dword(priv->mc, I5100_SPDCMD, dw);
/* wait up to 100ms */
et = jiffies + HZ / 10;
udelay(100);
while (1) {
pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
if (!I5100_SPDDATA_BUSY(w))
break;
udelay(100);
}
if (!I5100_SPDDATA_RDO(w) || I5100_SPDDATA_SBE(w))
return -1;
*byte = I5100_SPDDATA_DATA(w);
return 0;
}
/*
* fill dimm chip select map
*
* FIXME:
* o only valid for 4 ranks per controller
* o not the only way to may chip selects to dimm slots
* o investigate if there is some way to obtain this map from the bios
*/
static void __devinit i5100_init_dimm_csmap(struct mem_ctl_info *mci)
{
struct i5100_priv *priv = mci->pvt_info;
int i;
WARN_ON(priv->ranksperctlr != 4);
for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CTLR; i++) {
int j;
for (j = 0; j < I5100_MAX_RANKS_PER_DIMM; j++)
priv->dimm_csmap[i][j] = -1; /* default NC */
}
/* only 2 chip selects per slot... */
priv->dimm_csmap[0][0] = 0;
priv->dimm_csmap[0][1] = 3;
priv->dimm_csmap[1][0] = 1;
priv->dimm_csmap[1][1] = 2;
priv->dimm_csmap[2][0] = 2;
priv->dimm_csmap[3][0] = 3;
}
static void __devinit i5100_init_dimm_layout(struct pci_dev *pdev,
struct mem_ctl_info *mci)
{
struct i5100_priv *priv = mci->pvt_info;
int i;
for (i = 0; i < I5100_MAX_CTLRS; i++) {
int j;
for (j = 0; j < I5100_MAX_DIMM_SLOTS_PER_CTLR; j++) {
u8 rank;
if (i5100_read_spd_byte(mci, i, j, 5, &rank) < 0)
priv->dimm_numrank[i][j] = 0;
else
priv->dimm_numrank[i][j] = (rank & 3) + 1;
}
}
i5100_init_dimm_csmap(mci);
}
static void __devinit i5100_init_interleaving(struct pci_dev *pdev,
struct mem_ctl_info *mci)
{
u16 w;
u32 dw;
struct i5100_priv *priv = mci->pvt_info;
struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm };
int i;
pci_read_config_word(pdev, I5100_TOLM, &w);
priv->tolm = (u64) I5100_TOLM_TOLM(w) * 256 * 1024 * 1024;
pci_read_config_word(pdev, I5100_MIR0, &w);
priv->mir[0].limit = (u64) I5100_MIR_LIMIT(w) << 28;
priv->mir[0].way[1] = I5100_MIR_WAY1(w);
priv->mir[0].way[0] = I5100_MIR_WAY0(w);
pci_read_config_word(pdev, I5100_MIR1, &w);
priv->mir[1].limit = (u64) I5100_MIR_LIMIT(w) << 28;
priv->mir[1].way[1] = I5100_MIR_WAY1(w);
priv->mir[1].way[0] = I5100_MIR_WAY0(w);
pci_read_config_word(pdev, I5100_AMIR_0, &w);
priv->amir[0] = w;
pci_read_config_word(pdev, I5100_AMIR_1, &w);
priv->amir[1] = w;
for (i = 0; i < I5100_MAX_CTLRS; i++) {
int j;
for (j = 0; j < 5; j++) {
int k;
pci_read_config_dword(mms[i], I5100_DMIR + j * 4, &dw);
priv->dmir[i][j].limit =
(u64) I5100_DMIR_LIMIT(dw) << 28;
for (k = 0; k < I5100_MAX_RANKS_PER_DIMM; k++)
priv->dmir[i][j].rank[k] =
I5100_DMIR_RANK(dw, k);
}
}
i5100_init_mtr(mci);
}
static void __devinit i5100_init_csrows(struct mem_ctl_info *mci)
{
int i;
unsigned long total_pages = 0UL;
struct i5100_priv *priv = mci->pvt_info;
for (i = 0; i < mci->nr_csrows; i++) {
const unsigned long npages = i5100_npages(mci, i);
const unsigned cntlr = i5100_csrow_to_cntlr(mci, i);
const unsigned rank = i5100_csrow_to_rank(mci, i);
if (!npages)
continue;
/*
* FIXME: these two are totally bogus -- I don't see how to
* map them correctly to this structure...
*/
mci->csrows[i].first_page = total_pages;
mci->csrows[i].last_page = total_pages + npages - 1;
mci->csrows[i].page_mask = 0UL;
mci->csrows[i].nr_pages = npages;
mci->csrows[i].grain = 32;
mci->csrows[i].csrow_idx = i;
mci->csrows[i].dtype =
(priv->mtr[cntlr][rank].width == 4) ? DEV_X4 : DEV_X8;
mci->csrows[i].ue_count = 0;
mci->csrows[i].ce_count = 0;
mci->csrows[i].mtype = MEM_RDDR2;
mci->csrows[i].edac_mode = EDAC_SECDED;
mci->csrows[i].mci = mci;
mci->csrows[i].nr_channels = 1;
mci->csrows[i].channels[0].chan_idx = 0;
mci->csrows[i].channels[0].ce_count = 0;
mci->csrows[i].channels[0].csrow = mci->csrows + i;
snprintf(mci->csrows[i].channels[0].label,
sizeof(mci->csrows[i].channels[0].label),
"DIMM%u", i5100_rank_to_slot(mci, cntlr, rank));
total_pages += npages;
}
}
static int __devinit i5100_init_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int rc;
struct mem_ctl_info *mci;
struct i5100_priv *priv;
struct pci_dev *ch0mm, *ch1mm;
int ret = 0;
u32 dw;
int ranksperch;
if (PCI_FUNC(pdev->devfn) != 1)
return -ENODEV;
rc = pci_enable_device(pdev);
if (rc < 0) {
ret = rc;
goto bail;
}
/* ECC enabled? */
pci_read_config_dword(pdev, I5100_MC, &dw);
if (!I5100_MC_ERRDETEN(dw)) {
printk(KERN_INFO "i5100_edac: ECC not enabled.\n");
ret = -ENODEV;
goto bail;
}
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 08:49:04 +00:00
/* figure out how many ranks, from strapped state of 48GB_Mode input */
pci_read_config_dword(pdev, I5100_MS, &dw);
ranksperch = !!(dw & (1 << 8)) * 2 + 4;
if (ranksperch != 4) {
/* FIXME: get 6 ranks / controller to work - need hw... */
printk(KERN_INFO "i5100_edac: unsupported configuration.\n");
ret = -ENODEV;
goto bail;
}
/* device 21, func 0, Channel 0 Memory Map, Error Flag/Mask, etc... */
ch0mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_5100_21, 0);
if (!ch0mm)
return -ENODEV;
rc = pci_enable_device(ch0mm);
if (rc < 0) {
ret = rc;
goto bail_ch0;
}
/* device 22, func 0, Channel 1 Memory Map, Error Flag/Mask, etc... */
ch1mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_5100_22, 0);
if (!ch1mm) {
ret = -ENODEV;
goto bail_ch0;
}
rc = pci_enable_device(ch1mm);
if (rc < 0) {
ret = rc;
goto bail_ch1;
}
mci = edac_mc_alloc(sizeof(*priv), ranksperch * 2, 1, 0);
if (!mci) {
ret = -ENOMEM;
goto bail_ch1;
}
mci->dev = &pdev->dev;
priv = mci->pvt_info;
priv->ranksperctlr = ranksperch;
priv->mc = pdev;
priv->ch0mm = ch0mm;
priv->ch1mm = ch1mm;
i5100_init_dimm_layout(pdev, mci);
i5100_init_interleaving(pdev, mci);
mci->mtype_cap = MEM_FLAG_FB_DDR2;
mci->edac_ctl_cap = EDAC_FLAG_SECDED;
mci->edac_cap = EDAC_FLAG_SECDED;
mci->mod_name = "i5100_edac.c";
mci->mod_ver = "not versioned";
mci->ctl_name = "i5100";
mci->dev_name = pci_name(pdev);
mci->ctl_page_to_phys = i5100_ctl_page_to_phys;
mci->edac_check = i5100_check_error;
i5100_init_csrows(mci);
/* this strange construction seems to be in every driver, dunno why */
switch (edac_op_state) {
case EDAC_OPSTATE_POLL:
case EDAC_OPSTATE_NMI:
break;
default:
edac_op_state = EDAC_OPSTATE_POLL;
break;
}
if (edac_mc_add_mc(mci)) {
ret = -ENODEV;
goto bail_mc;
}
goto bail;
bail_mc:
edac_mc_free(mci);
bail_ch1:
pci_dev_put(ch1mm);
bail_ch0:
pci_dev_put(ch0mm);
bail:
return ret;
}
static void __devexit i5100_remove_one(struct pci_dev *pdev)
{
struct mem_ctl_info *mci;
struct i5100_priv *priv;
mci = edac_mc_del_mc(&pdev->dev);
if (!mci)
return;
priv = mci->pvt_info;
pci_dev_put(priv->ch0mm);
pci_dev_put(priv->ch1mm);
edac_mc_free(mci);
}
static const struct pci_device_id i5100_pci_tbl[] __devinitdata = {
/* Device 16, Function 0, Channel 0 Memory Map, Error Flag/Mask, ... */
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5100_16) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, i5100_pci_tbl);
static struct pci_driver i5100_driver = {
.name = KBUILD_BASENAME,
.probe = i5100_init_one,
.remove = __devexit_p(i5100_remove_one),
.id_table = i5100_pci_tbl,
};
static int __init i5100_init(void)
{
int pci_rc;
pci_rc = pci_register_driver(&i5100_driver);
return (pci_rc < 0) ? pci_rc : 0;
}
static void __exit i5100_exit(void)
{
pci_unregister_driver(&i5100_driver);
}
module_init(i5100_init);
module_exit(i5100_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR
("Arthur Jones <ajones@riverbed.com>");
MODULE_DESCRIPTION("MC Driver for Intel I5100 memory controllers");