linux/drivers/usb/misc/cypress_cy7c63.c

280 lines
7.1 KiB
C
Raw Normal View History

/*
* cypress_cy7c63.c
*
* Copyright (c) 2006-2007 Oliver Bock (bock@tfh-berlin.de)
*
* This driver is based on the Cypress USB Driver by Marcus Maul
* (cyport) and the 2.0 version of Greg Kroah-Hartman's
* USB Skeleton driver.
*
* This is a generic driver for the Cypress CY7C63xxx family.
* For the time being it enables you to read from and write to
* the single I/O ports of the device.
*
* Supported vendors: AK Modul-Bus Computer GmbH
* (Firmware "Port-Chip")
*
* Supported devices: CY7C63001A-PC
* CY7C63001C-PXC
* CY7C63001C-SXC
*
* Supported functions: Read/Write Ports
*
*
* For up-to-date information please visit:
* http://www.obock.de/kernel/cypress
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/usb.h>
#define DRIVER_AUTHOR "Oliver Bock (bock@tfh-berlin.de)"
#define DRIVER_DESC "Cypress CY7C63xxx USB driver"
#define CYPRESS_VENDOR_ID 0xa2c
#define CYPRESS_PRODUCT_ID 0x8
#define CYPRESS_READ_PORT 0x4
#define CYPRESS_WRITE_PORT 0x5
#define CYPRESS_READ_RAM 0x2
#define CYPRESS_WRITE_RAM 0x3
#define CYPRESS_READ_ROM 0x1
#define CYPRESS_READ_PORT_ID0 0
#define CYPRESS_WRITE_PORT_ID0 0
#define CYPRESS_READ_PORT_ID1 0x2
#define CYPRESS_WRITE_PORT_ID1 1
#define CYPRESS_MAX_REQSIZE 8
/* table of devices that work with this driver */
static const struct usb_device_id cypress_table[] = {
{ USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) },
{ }
};
MODULE_DEVICE_TABLE(usb, cypress_table);
/* structure to hold all of our device specific stuff */
struct cypress {
struct usb_device * udev;
unsigned char port[2];
};
/* used to send usb control messages to device */
static int vendor_command(struct cypress *dev, unsigned char request,
unsigned char address, unsigned char data)
{
int retval = 0;
unsigned int pipe;
unsigned char *iobuf;
/* allocate some memory for the i/o buffer*/
iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL);
if (!iobuf) {
dev_err(&dev->udev->dev, "Out of memory!\n");
retval = -ENOMEM;
goto error;
}
dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data);
/* prepare usb control message and send it upstream */
pipe = usb_rcvctrlpipe(dev->udev, 0);
retval = usb_control_msg(dev->udev, pipe, request,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
address, data, iobuf, CYPRESS_MAX_REQSIZE,
USB_CTRL_GET_TIMEOUT);
/* store returned data (more READs to be added) */
switch (request) {
case CYPRESS_READ_PORT:
if (address == CYPRESS_READ_PORT_ID0) {
dev->port[0] = iobuf[1];
dev_dbg(&dev->udev->dev,
"READ_PORT0 returned: %d\n",
dev->port[0]);
}
else if (address == CYPRESS_READ_PORT_ID1) {
dev->port[1] = iobuf[1];
dev_dbg(&dev->udev->dev,
"READ_PORT1 returned: %d\n",
dev->port[1]);
}
break;
}
kfree(iobuf);
error:
return retval;
}
/* write port value */
static ssize_t write_port(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count,
int port_num, int write_id)
{
int value = -1;
int result = 0;
struct usb_interface *intf = to_usb_interface(dev);
struct cypress *cyp = usb_get_intfdata(intf);
dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", port_num);
/* validate input data */
if (sscanf(buf, "%d", &value) < 1) {
result = -EINVAL;
goto error;
}
if (value < 0 || value > 255) {
result = -EINVAL;
goto error;
}
result = vendor_command(cyp, CYPRESS_WRITE_PORT, write_id,
(unsigned char)value);
dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
error:
return result < 0 ? result : count;
}
/* attribute callback handler (write) */
static ssize_t set_port0_handler(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return write_port(dev, attr, buf, count, 0, CYPRESS_WRITE_PORT_ID0);
}
/* attribute callback handler (write) */
static ssize_t set_port1_handler(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return write_port(dev, attr, buf, count, 1, CYPRESS_WRITE_PORT_ID1);
}
/* read port value */
static ssize_t read_port(struct device *dev, struct device_attribute *attr,
char *buf, int port_num, int read_id)
{
int result = 0;
struct usb_interface *intf = to_usb_interface(dev);
struct cypress *cyp = usb_get_intfdata(intf);
dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", port_num);
result = vendor_command(cyp, CYPRESS_READ_PORT, read_id, 0);
dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
return sprintf(buf, "%d", cyp->port[port_num]);
}
/* attribute callback handler (read) */
static ssize_t get_port0_handler(struct device *dev,
struct device_attribute *attr, char *buf)
{
return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0);
}
/* attribute callback handler (read) */
static ssize_t get_port1_handler(struct device *dev,
struct device_attribute *attr, char *buf)
{
return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
}
static DEVICE_ATTR(port0, S_IRUGO | S_IWUSR, get_port0_handler, set_port0_handler);
static DEVICE_ATTR(port1, S_IRUGO | S_IWUSR, get_port1_handler, set_port1_handler);
static int cypress_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct cypress *dev = NULL;
int retval = -ENOMEM;
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
dev_err(&interface->dev, "Out of memory!\n");
goto error_mem;
}
dev->udev = usb_get_dev(interface_to_usbdev(interface));
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
/* create device attribute files */
retval = device_create_file(&interface->dev, &dev_attr_port0);
if (retval)
goto error;
retval = device_create_file(&interface->dev, &dev_attr_port1);
if (retval)
goto error;
/* let the user know that the device is now attached */
dev_info(&interface->dev,
"Cypress CY7C63xxx device now attached\n");
return 0;
error:
device_remove_file(&interface->dev, &dev_attr_port0);
device_remove_file(&interface->dev, &dev_attr_port1);
usb_set_intfdata(interface, NULL);
usb_put_dev(dev->udev);
kfree(dev);
error_mem:
return retval;
}
static void cypress_disconnect(struct usb_interface *interface)
{
struct cypress *dev;
dev = usb_get_intfdata(interface);
/* remove device attribute files */
device_remove_file(&interface->dev, &dev_attr_port0);
device_remove_file(&interface->dev, &dev_attr_port1);
/* the intfdata can be set to NULL only after the
* device files have been removed */
usb_set_intfdata(interface, NULL);
usb_put_dev(dev->udev);
dev_info(&interface->dev,
"Cypress CY7C63xxx device now disconnected\n");
kfree(dev);
}
static struct usb_driver cypress_driver = {
.name = "cypress_cy7c63",
.probe = cypress_probe,
.disconnect = cypress_disconnect,
.id_table = cypress_table,
};
module_usb_driver(cypress_driver);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");