linux/drivers/mtd/mtdchar.c

807 lines
16 KiB
C
Raw Normal View History

/*
* $Id: mtdchar.c,v 1.76 2005/11/07 11:14:20 gleixner Exp $
*
* Character-device access to raw MTD devices.
*
*/
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/compatmac.h>
#include <asm/uaccess.h>
static struct class *mtd_class;
static void mtd_notify_add(struct mtd_info* mtd)
{
if (!mtd)
return;
class_device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2),
NULL, "mtd%d", mtd->index);
class_device_create(mtd_class, NULL,
MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1),
NULL, "mtd%dro", mtd->index);
}
static void mtd_notify_remove(struct mtd_info* mtd)
{
if (!mtd)
return;
class_device_destroy(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2));
class_device_destroy(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1));
}
static struct mtd_notifier notifier = {
.add = mtd_notify_add,
.remove = mtd_notify_remove,
};
/*
* Data structure to hold the pointer to the mtd device as well
* as mode information ofr various use cases.
*/
struct mtd_file_info {
struct mtd_info *mtd;
enum mtd_file_modes mode;
};
static loff_t mtd_lseek (struct file *file, loff_t offset, int orig)
{
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
switch (orig) {
case SEEK_SET:
break;
case SEEK_CUR:
offset += file->f_pos;
break;
case SEEK_END:
offset += mtd->size;
break;
default:
return -EINVAL;
}
if (offset >= 0 && offset <= mtd->size)
return file->f_pos = offset;
return -EINVAL;
}
static int mtd_open(struct inode *inode, struct file *file)
{
int minor = iminor(inode);
int devnum = minor >> 1;
struct mtd_info *mtd;
struct mtd_file_info *mfi;
DEBUG(MTD_DEBUG_LEVEL0, "MTD_open\n");
if (devnum >= MAX_MTD_DEVICES)
return -ENODEV;
/* You can't open the RO devices RW */
if ((file->f_mode & 2) && (minor & 1))
return -EACCES;
mtd = get_mtd_device(NULL, devnum);
if (IS_ERR(mtd))
return PTR_ERR(mtd);
if (MTD_ABSENT == mtd->type) {
put_mtd_device(mtd);
return -ENODEV;
}
/* You can't open it RW if it's not a writeable device */
if ((file->f_mode & 2) && !(mtd->flags & MTD_WRITEABLE)) {
put_mtd_device(mtd);
return -EACCES;
}
mfi = kzalloc(sizeof(*mfi), GFP_KERNEL);
if (!mfi) {
put_mtd_device(mtd);
return -ENOMEM;
}
mfi->mtd = mtd;
file->private_data = mfi;
return 0;
} /* mtd_open */
/*====================================================================*/
static int mtd_close(struct inode *inode, struct file *file)
{
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
if (mtd->sync)
mtd->sync(mtd);
put_mtd_device(mtd);
file->private_data = NULL;
kfree(mfi);
return 0;
} /* mtd_close */
/* FIXME: This _really_ needs to die. In 2.5, we should lock the
userspace buffer down and use it directly with readv/writev.
*/
#define MAX_KMALLOC_SIZE 0x20000
static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t *ppos)
{
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
size_t retlen=0;
size_t total_retlen=0;
int ret=0;
int len;
char *kbuf;
DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
if (*ppos + count > mtd->size)
count = mtd->size - *ppos;
if (!count)
return 0;
/* FIXME: Use kiovec in 2.5 to lock down the user's buffers
and pass them directly to the MTD functions */
if (count > MAX_KMALLOC_SIZE)
kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL);
else
kbuf=kmalloc(count, GFP_KERNEL);
if (!kbuf)
return -ENOMEM;
while (count) {
if (count > MAX_KMALLOC_SIZE)
len = MAX_KMALLOC_SIZE;
else
len = count;
switch (mfi->mode) {
case MTD_MODE_OTP_FACTORY:
ret = mtd->read_fact_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
case MTD_MODE_OTP_USER:
ret = mtd->read_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
case MTD_MODE_RAW:
{
struct mtd_oob_ops ops;
ops.mode = MTD_OOB_RAW;
ops.datbuf = kbuf;
ops.oobbuf = NULL;
ops.len = len;
ret = mtd->read_oob(mtd, *ppos, &ops);
retlen = ops.retlen;
break;
}
default:
ret = mtd->read(mtd, *ppos, len, &retlen, kbuf);
}
/* Nand returns -EBADMSG on ecc errors, but it returns
* the data. For our userspace tools it is important
* to dump areas with ecc errors !
* For kernel internal usage it also might return -EUCLEAN
* to signal the caller that a bitflip has occured and has
* been corrected by the ECC algorithm.
* Userspace software which accesses NAND this way
* must be aware of the fact that it deals with NAND
*/
if (!ret || (ret == -EUCLEAN) || (ret == -EBADMSG)) {
*ppos += retlen;
if (copy_to_user(buf, kbuf, retlen)) {
kfree(kbuf);
return -EFAULT;
}
else
total_retlen += retlen;
count -= retlen;
buf += retlen;
if (retlen == 0)
count = 0;
}
else {
kfree(kbuf);
return ret;
}
}
kfree(kbuf);
return total_retlen;
} /* mtd_read */
static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count,loff_t *ppos)
{
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
char *kbuf;
size_t retlen;
size_t total_retlen=0;
int ret=0;
int len;
DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
if (*ppos == mtd->size)
return -ENOSPC;
if (*ppos + count > mtd->size)
count = mtd->size - *ppos;
if (!count)
return 0;
if (count > MAX_KMALLOC_SIZE)
kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL);
else
kbuf=kmalloc(count, GFP_KERNEL);
if (!kbuf)
return -ENOMEM;
while (count) {
if (count > MAX_KMALLOC_SIZE)
len = MAX_KMALLOC_SIZE;
else
len = count;
if (copy_from_user(kbuf, buf, len)) {
kfree(kbuf);
return -EFAULT;
}
switch (mfi->mode) {
case MTD_MODE_OTP_FACTORY:
ret = -EROFS;
break;
case MTD_MODE_OTP_USER:
if (!mtd->write_user_prot_reg) {
ret = -EOPNOTSUPP;
break;
}
ret = mtd->write_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
case MTD_MODE_RAW:
{
struct mtd_oob_ops ops;
ops.mode = MTD_OOB_RAW;
ops.datbuf = kbuf;
ops.oobbuf = NULL;
ops.len = len;
ret = mtd->write_oob(mtd, *ppos, &ops);
retlen = ops.retlen;
break;
}
default:
ret = (*(mtd->write))(mtd, *ppos, len, &retlen, kbuf);
}
if (!ret) {
*ppos += retlen;
total_retlen += retlen;
count -= retlen;
buf += retlen;
}
else {
kfree(kbuf);
return ret;
}
}
kfree(kbuf);
return total_retlen;
} /* mtd_write */
/*======================================================================
IOCTL calls for getting device parameters.
======================================================================*/
static void mtdchar_erase_callback (struct erase_info *instr)
{
wake_up((wait_queue_head_t *)instr->priv);
}
#if defined(CONFIG_MTD_OTP) || defined(CONFIG_MTD_ONENAND_OTP)
static int otp_select_filemode(struct mtd_file_info *mfi, int mode)
{
struct mtd_info *mtd = mfi->mtd;
int ret = 0;
switch (mode) {
case MTD_OTP_FACTORY:
if (!mtd->read_fact_prot_reg)
ret = -EOPNOTSUPP;
else
mfi->mode = MTD_MODE_OTP_FACTORY;
break;
case MTD_OTP_USER:
if (!mtd->read_fact_prot_reg)
ret = -EOPNOTSUPP;
else
mfi->mode = MTD_MODE_OTP_USER;
break;
default:
ret = -EINVAL;
case MTD_OTP_OFF:
break;
}
return ret;
}
#else
# define otp_select_filemode(f,m) -EOPNOTSUPP
#endif
static int mtd_ioctl(struct inode *inode, struct file *file,
u_int cmd, u_long arg)
{
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
void __user *argp = (void __user *)arg;
int ret = 0;
u_long size;
struct mtd_info_user info;
DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
if (cmd & IOC_IN) {
if (!access_ok(VERIFY_READ, argp, size))
return -EFAULT;
}
if (cmd & IOC_OUT) {
if (!access_ok(VERIFY_WRITE, argp, size))
return -EFAULT;
}
switch (cmd) {
case MEMGETREGIONCOUNT:
if (copy_to_user(argp, &(mtd->numeraseregions), sizeof(int)))
return -EFAULT;
break;
case MEMGETREGIONINFO:
{
struct region_info_user ur;
if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
return -EFAULT;
if (ur.regionindex >= mtd->numeraseregions)
return -EINVAL;
if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
sizeof(struct mtd_erase_region_info)))
return -EFAULT;
break;
}
case MEMGETINFO:
info.type = mtd->type;
info.flags = mtd->flags;
info.size = mtd->size;
info.erasesize = mtd->erasesize;
info.writesize = mtd->writesize;
info.oobsize = mtd->oobsize;
/* The below fields are obsolete */
info.ecctype = -1;
info.eccsize = 0;
if (copy_to_user(argp, &info, sizeof(struct mtd_info_user)))
return -EFAULT;
break;
case MEMERASE:
{
struct erase_info *erase;
if(!(file->f_mode & 2))
return -EPERM;
erase=kzalloc(sizeof(struct erase_info),GFP_KERNEL);
if (!erase)
ret = -ENOMEM;
else {
wait_queue_head_t waitq;
DECLARE_WAITQUEUE(wait, current);
init_waitqueue_head(&waitq);
if (copy_from_user(&erase->addr, argp,
sizeof(struct erase_info_user))) {
kfree(erase);
return -EFAULT;
}
erase->mtd = mtd;
erase->callback = mtdchar_erase_callback;
erase->priv = (unsigned long)&waitq;
/*
FIXME: Allow INTERRUPTIBLE. Which means
not having the wait_queue head on the stack.
If the wq_head is on the stack, and we
leave because we got interrupted, then the
wq_head is no longer there when the
callback routine tries to wake us up.
*/
ret = mtd->erase(mtd, erase);
if (!ret) {
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&waitq, &wait);
if (erase->state != MTD_ERASE_DONE &&
erase->state != MTD_ERASE_FAILED)
schedule();
remove_wait_queue(&waitq, &wait);
set_current_state(TASK_RUNNING);
ret = (erase->state == MTD_ERASE_FAILED)?-EIO:0;
}
kfree(erase);
}
break;
}
case MEMWRITEOOB:
{
struct mtd_oob_buf buf;
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
struct mtd_oob_ops ops;
if(!(file->f_mode & 2))
return -EPERM;
if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
return -EFAULT;
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
if (buf.length > 4096)
return -EINVAL;
if (!mtd->write_oob)
ret = -EOPNOTSUPP;
else
ret = access_ok(VERIFY_READ, buf.ptr,
buf.length) ? 0 : EFAULT;
if (ret)
return ret;
ops.ooblen = buf.length;
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
ops.ooboffs = buf.start & (mtd->oobsize - 1);
ops.datbuf = NULL;
ops.mode = MTD_OOB_PLACE;
if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
return -EINVAL;
ops.oobbuf = kmalloc(buf.length, GFP_KERNEL);
if (!ops.oobbuf)
return -ENOMEM;
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
if (copy_from_user(ops.oobbuf, buf.ptr, buf.length)) {
kfree(ops.oobbuf);
return -EFAULT;
}
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
buf.start &= ~(mtd->oobsize - 1);
ret = mtd->write_oob(mtd, buf.start, &ops);
if (copy_to_user(argp + sizeof(uint32_t), &ops.oobretlen,
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
sizeof(uint32_t)))
ret = -EFAULT;
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
kfree(ops.oobbuf);
break;
}
case MEMREADOOB:
{
struct mtd_oob_buf buf;
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
struct mtd_oob_ops ops;
if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
return -EFAULT;
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
if (buf.length > 4096)
return -EINVAL;
if (!mtd->read_oob)
ret = -EOPNOTSUPP;
else
ret = access_ok(VERIFY_WRITE, buf.ptr,
buf.length) ? 0 : -EFAULT;
if (ret)
return ret;
ops.ooblen = buf.length;
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
ops.ooboffs = buf.start & (mtd->oobsize - 1);
ops.datbuf = NULL;
ops.mode = MTD_OOB_PLACE;
if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
return -EINVAL;
ops.oobbuf = kmalloc(buf.length, GFP_KERNEL);
if (!ops.oobbuf)
return -ENOMEM;
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
buf.start &= ~(mtd->oobsize - 1);
ret = mtd->read_oob(mtd, buf.start, &ops);
if (put_user(ops.oobretlen, (uint32_t __user *)argp))
ret = -EFAULT;
else if (ops.oobretlen && copy_to_user(buf.ptr, ops.oobbuf,
ops.oobretlen))
ret = -EFAULT;
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
kfree(ops.oobbuf);
break;
}
case MEMLOCK:
{
struct erase_info_user info;
if (copy_from_user(&info, argp, sizeof(info)))
return -EFAULT;
if (!mtd->lock)
ret = -EOPNOTSUPP;
else
ret = mtd->lock(mtd, info.start, info.length);
break;
}
case MEMUNLOCK:
{
struct erase_info_user info;
if (copy_from_user(&info, argp, sizeof(info)))
return -EFAULT;
if (!mtd->unlock)
ret = -EOPNOTSUPP;
else
ret = mtd->unlock(mtd, info.start, info.length);
break;
}
/* Legacy interface */
case MEMGETOOBSEL:
{
struct nand_oobinfo oi;
if (!mtd->ecclayout)
return -EOPNOTSUPP;
if (mtd->ecclayout->eccbytes > ARRAY_SIZE(oi.eccpos))
return -EINVAL;
oi.useecc = MTD_NANDECC_AUTOPLACE;
memcpy(&oi.eccpos, mtd->ecclayout->eccpos, sizeof(oi.eccpos));
memcpy(&oi.oobfree, mtd->ecclayout->oobfree,
sizeof(oi.oobfree));
oi.eccbytes = mtd->ecclayout->eccbytes;
if (copy_to_user(argp, &oi, sizeof(struct nand_oobinfo)))
return -EFAULT;
break;
}
case MEMGETBADBLOCK:
{
loff_t offs;
if (copy_from_user(&offs, argp, sizeof(loff_t)))
return -EFAULT;
if (!mtd->block_isbad)
ret = -EOPNOTSUPP;
else
return mtd->block_isbad(mtd, offs);
break;
}
case MEMSETBADBLOCK:
{
loff_t offs;
if (copy_from_user(&offs, argp, sizeof(loff_t)))
return -EFAULT;
if (!mtd->block_markbad)
ret = -EOPNOTSUPP;
else
return mtd->block_markbad(mtd, offs);
break;
}
#if defined(CONFIG_MTD_OTP) || defined(CONFIG_MTD_ONENAND_OTP)
case OTPSELECT:
{
int mode;
if (copy_from_user(&mode, argp, sizeof(int)))
return -EFAULT;
mfi->mode = MTD_MODE_NORMAL;
ret = otp_select_filemode(mfi, mode);
file->f_pos = 0;
break;
}
case OTPGETREGIONCOUNT:
case OTPGETREGIONINFO:
{
struct otp_info *buf = kmalloc(4096, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ret = -EOPNOTSUPP;
switch (mfi->mode) {
case MTD_MODE_OTP_FACTORY:
if (mtd->get_fact_prot_info)
ret = mtd->get_fact_prot_info(mtd, buf, 4096);
break;
case MTD_MODE_OTP_USER:
if (mtd->get_user_prot_info)
ret = mtd->get_user_prot_info(mtd, buf, 4096);
break;
default:
break;
}
if (ret >= 0) {
if (cmd == OTPGETREGIONCOUNT) {
int nbr = ret / sizeof(struct otp_info);
ret = copy_to_user(argp, &nbr, sizeof(int));
} else
ret = copy_to_user(argp, buf, ret);
if (ret)
ret = -EFAULT;
}
kfree(buf);
break;
}
case OTPLOCK:
{
struct otp_info info;
if (mfi->mode != MTD_MODE_OTP_USER)
return -EINVAL;
if (copy_from_user(&info, argp, sizeof(info)))
return -EFAULT;
if (!mtd->lock_user_prot_reg)
return -EOPNOTSUPP;
ret = mtd->lock_user_prot_reg(mtd, info.start, info.length);
break;
}
#endif
case ECCGETLAYOUT:
{
if (!mtd->ecclayout)
return -EOPNOTSUPP;
if (copy_to_user(argp, mtd->ecclayout,
sizeof(struct nand_ecclayout)))
return -EFAULT;
break;
}
case ECCGETSTATS:
{
if (copy_to_user(argp, &mtd->ecc_stats,
sizeof(struct mtd_ecc_stats)))
return -EFAULT;
break;
}
case MTDFILEMODE:
{
mfi->mode = 0;
switch(arg) {
case MTD_MODE_OTP_FACTORY:
case MTD_MODE_OTP_USER:
ret = otp_select_filemode(mfi, arg);
break;
case MTD_MODE_RAW:
if (!mtd->read_oob || !mtd->write_oob)
return -EOPNOTSUPP;
mfi->mode = arg;
case MTD_MODE_NORMAL:
break;
default:
ret = -EINVAL;
}
file->f_pos = 0;
break;
}
default:
ret = -ENOTTY;
}
return ret;
} /* memory_ioctl */
static const struct file_operations mtd_fops = {
.owner = THIS_MODULE,
.llseek = mtd_lseek,
.read = mtd_read,
.write = mtd_write,
.ioctl = mtd_ioctl,
.open = mtd_open,
.release = mtd_close,
};
static int __init init_mtdchar(void)
{
if (register_chrdev(MTD_CHAR_MAJOR, "mtd", &mtd_fops)) {
printk(KERN_NOTICE "Can't allocate major number %d for Memory Technology Devices.\n",
MTD_CHAR_MAJOR);
return -EAGAIN;
}
mtd_class = class_create(THIS_MODULE, "mtd");
if (IS_ERR(mtd_class)) {
printk(KERN_ERR "Error creating mtd class.\n");
unregister_chrdev(MTD_CHAR_MAJOR, "mtd");
return PTR_ERR(mtd_class);
}
register_mtd_user(&notifier);
return 0;
}
static void __exit cleanup_mtdchar(void)
{
unregister_mtd_user(&notifier);
class_destroy(mtd_class);
unregister_chrdev(MTD_CHAR_MAJOR, "mtd");
}
module_init(init_mtdchar);
module_exit(cleanup_mtdchar);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
MODULE_DESCRIPTION("Direct character-device access to MTD devices");