linux/tools/perf/builtin-stat.c

550 lines
13 KiB
C
Raw Normal View History

/*
* builtin-stat.c
*
* Builtin stat command: Give a precise performance counters summary
* overview about any workload, CPU or specific PID.
*
* Sample output:
$ perf stat ~/hackbench 10
Time: 0.104
Performance counter stats for '/home/mingo/hackbench':
1255.538611 task clock ticks # 10.143 CPU utilization factor
54011 context switches # 0.043 M/sec
385 CPU migrations # 0.000 M/sec
17755 pagefaults # 0.014 M/sec
3808323185 CPU cycles # 3033.219 M/sec
1575111190 instructions # 1254.530 M/sec
17367895 cache references # 13.833 M/sec
7674421 cache misses # 6.112 M/sec
Wall-clock time elapsed: 123.786620 msecs
*
* Copyright (C) 2008, Red Hat Inc, Ingo Molnar <mingo@redhat.com>
*
* Improvements and fixes by:
*
* Arjan van de Ven <arjan@linux.intel.com>
* Yanmin Zhang <yanmin.zhang@intel.com>
* Wu Fengguang <fengguang.wu@intel.com>
* Mike Galbraith <efault@gmx.de>
* Paul Mackerras <paulus@samba.org>
* Jaswinder Singh Rajput <jaswinder@kernel.org>
*
* Released under the GPL v2. (and only v2, not any later version)
*/
#include "perf.h"
#include "builtin.h"
#include "util/util.h"
#include "util/parse-options.h"
#include "util/parse-events.h"
#include "util/event.h"
#include "util/debug.h"
#include "util/header.h"
perf tools: Fix sparse CPU numbering related bugs At present, the perf subcommands that do system-wide monitoring (perf stat, perf record and perf top) don't work properly unless the online cpus are numbered 0, 1, ..., N-1. These tools ask for the number of online cpus with sysconf(_SC_NPROCESSORS_ONLN) and then try to create events for cpus 0, 1, ..., N-1. This creates problems for systems where the online cpus are numbered sparsely. For example, a POWER6 system in single-threaded mode (i.e. only running 1 hardware thread per core) will have only even-numbered cpus online. This fixes the problem by reading the /sys/devices/system/cpu/online file to find out which cpus are online. The code that does that is in tools/perf/util/cpumap.[ch], and consists of a read_cpu_map() function that sets up a cpumap[] array and returns the number of online cpus. If /sys/devices/system/cpu/online can't be read or can't be parsed successfully, it falls back to using sysconf to ask how many cpus are online and sets up an identity map in cpumap[]. The perf record, perf stat and perf top code then calls read_cpu_map() in the system-wide monitoring case (instead of sysconf) and uses cpumap[] to get the cpu numbers to pass to perf_event_open. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <20100310093609.GA3959@brick.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10 09:36:09 +00:00
#include "util/cpumap.h"
#include <sys/prctl.h>
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
#include <math.h>
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
static struct perf_event_attr default_attrs[] = {
{ .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK },
{ .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES },
{ .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS },
{ .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS },
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES },
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS },
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS },
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES },
perf stat: Count branches first Count branches first, cache-misses second. The reason is that on x86 branches are not counted by all counters on all CPUs. Before: Performance counter stats for 'ls': 0.756653 task-clock-msecs # 0.802 CPUs 0 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 250 page-faults # 0.330 M/sec 2375725 cycles # 3139.781 M/sec 1628129 instructions # 0.685 IPC 19643 cache-references # 25.960 M/sec 4608 cache-misses # 6.090 M/sec 342532 branches # 452.694 M/sec <not counted> branch-misses 0.000943356 seconds time elapsed After: Performance counter stats for 'ls': 1.056734 task-clock-msecs # 0.859 CPUs 0 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 259 page-faults # 0.245 M/sec 3345932 cycles # 3166.295 M/sec 3074090 instructions # 0.919 IPC 616928 branches # 583.806 M/sec 39279 branch-misses # 6.367 % 21312 cache-references # 20.168 M/sec 3661 cache-misses # 3.464 M/sec 0.001230551 seconds time elapsed (also prettify the printout of branch misses, in case it's getting scaled.) Cc: Tim Blechmann <tim@klingt.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4ADC3975.8050109@klingt.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- tools/perf/builtin-stat.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index c373683..95a55ea 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -59,6 +59,8 @@ static struct perf_event_attr default_attrs[] = { { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES}, { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS}, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES }, }; --- tools/perf/builtin-stat.c | 20 ++++++++++---------- 1 files changed, 10 insertions(+), 10 deletions(-) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index 95a55ea..90e0a26 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -50,17 +50,17 @@ static struct perf_event_attr default_attrs[] = { - { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK }, - { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES}, - { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS }, - { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS }, - - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES }, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES}, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES }, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS}, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS }, + + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES }, };
2009-10-19 11:33:03 +00:00
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES },
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES },
};
static int system_wide = 0;
static unsigned int nr_cpus = 0;
static int run_idx = 0;
static int run_count = 1;
static int inherit = 1;
static int scale = 1;
static pid_t target_pid = -1;
static pid_t child_pid = -1;
static int null_run = 0;
static int fd[MAX_NR_CPUS][MAX_COUNTERS];
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
static int event_scaled[MAX_COUNTERS];
static volatile int done = 0;
struct stats
{
double n, mean, M2;
};
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
static void update_stats(struct stats *stats, u64 val)
{
double delta;
stats->n++;
delta = val - stats->mean;
stats->mean += delta / stats->n;
stats->M2 += delta*(val - stats->mean);
}
static double avg_stats(struct stats *stats)
{
return stats->mean;
}
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
/*
* http://en.wikipedia.org/wiki/Algorithms_for_calculating_variance
*
* (\Sum n_i^2) - ((\Sum n_i)^2)/n
* s^2 = -------------------------------
* n - 1
*
* http://en.wikipedia.org/wiki/Stddev
*
* The std dev of the mean is related to the std dev by:
*
* s
* s_mean = -------
* sqrt(n)
*
*/
static double stddev_stats(struct stats *stats)
{
double variance = stats->M2 / (stats->n - 1);
double variance_mean = variance / stats->n;
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
return sqrt(variance_mean);
}
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
struct stats event_res_stats[MAX_COUNTERS][3];
struct stats runtime_nsecs_stats;
struct stats walltime_nsecs_stats;
struct stats runtime_cycles_stats;
struct stats runtime_branches_stats;
perf_counter tools: Also display time-normalized stat results Add new column that normalizes counter results by 'nanoseconds spent running' unit. Before: Performance counter stats for '/home/mingo/hackbench': 10469.403605 task clock ticks (msecs) 75502 context switches (events) 9501 CPU migrations (events) 36158 pagefaults (events) 31975676185 CPU cycles (events) 26257738659 instructions (events) 108740581 cache references (events) 54606088 cache misses (events) Wall-clock time elapsed: 810.514504 msecs After: Performance counter stats for '/home/mingo/hackbench': 10469.403605 task clock ticks (msecs) 75502 context switches # 0.007 M/sec 9501 CPU migrations # 0.001 M/sec 36158 pagefaults # 0.003 M/sec 31975676185 CPU cycles # 3054.202 M/sec 26257738659 instructions # 2508.045 M/sec 108740581 cache references # 10.387 M/sec 54606088 cache misses # 5.216 M/sec Wall-clock time elapsed: 810.514504 msecs The advantage of that column is that it is characteristic of the execution workflow, regardless of runtime. Hence 'hackbench 10' will look similar to 'hackbench 15' - while the absolute counter values are very different. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 07:10:54 +00:00
#define MATCH_EVENT(t, c, counter) \
(attrs[counter].type == PERF_TYPE_##t && \
attrs[counter].config == PERF_COUNT_##c)
#define ERR_PERF_OPEN \
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
"Error: counter %d, sys_perf_event_open() syscall returned with %d (%s)\n"
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 11:13:21 +00:00
static void create_perf_stat_counter(int counter, int pid)
{
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
struct perf_event_attr *attr = attrs + counter;
if (scale)
attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
PERF_FORMAT_TOTAL_TIME_RUNNING;
if (system_wide) {
unsigned int cpu;
for (cpu = 0; cpu < nr_cpus; cpu++) {
perf tools: Fix sparse CPU numbering related bugs At present, the perf subcommands that do system-wide monitoring (perf stat, perf record and perf top) don't work properly unless the online cpus are numbered 0, 1, ..., N-1. These tools ask for the number of online cpus with sysconf(_SC_NPROCESSORS_ONLN) and then try to create events for cpus 0, 1, ..., N-1. This creates problems for systems where the online cpus are numbered sparsely. For example, a POWER6 system in single-threaded mode (i.e. only running 1 hardware thread per core) will have only even-numbered cpus online. This fixes the problem by reading the /sys/devices/system/cpu/online file to find out which cpus are online. The code that does that is in tools/perf/util/cpumap.[ch], and consists of a read_cpu_map() function that sets up a cpumap[] array and returns the number of online cpus. If /sys/devices/system/cpu/online can't be read or can't be parsed successfully, it falls back to using sysconf to ask how many cpus are online and sets up an identity map in cpumap[]. The perf record, perf stat and perf top code then calls read_cpu_map() in the system-wide monitoring case (instead of sysconf) and uses cpumap[] to get the cpu numbers to pass to perf_event_open. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <20100310093609.GA3959@brick.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10 09:36:09 +00:00
fd[cpu][counter] = sys_perf_event_open(attr, -1, cpumap[cpu], -1, 0);
if (fd[cpu][counter] < 0 && verbose)
fprintf(stderr, ERR_PERF_OPEN, counter,
fd[cpu][counter], strerror(errno));
}
} else {
attr->inherit = inherit;
attr->disabled = 1;
attr->enable_on_exec = 1;
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
fd[0][counter] = sys_perf_event_open(attr, pid, -1, -1, 0);
if (fd[0][counter] < 0 && verbose)
fprintf(stderr, ERR_PERF_OPEN, counter,
fd[0][counter], strerror(errno));
}
}
/*
* Does the counter have nsecs as a unit?
*/
static inline int nsec_counter(int counter)
{
if (MATCH_EVENT(SOFTWARE, SW_CPU_CLOCK, counter) ||
MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter))
return 1;
return 0;
}
/*
* Read out the results of a single counter:
*/
static void read_counter(int counter)
{
u64 count[3], single_count[3];
unsigned int cpu;
size_t res, nv;
int scaled;
int i;
count[0] = count[1] = count[2] = 0;
nv = scale ? 3 : 1;
for (cpu = 0; cpu < nr_cpus; cpu++) {
if (fd[cpu][counter] < 0)
continue;
res = read(fd[cpu][counter], single_count, nv * sizeof(u64));
assert(res == nv * sizeof(u64));
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
close(fd[cpu][counter]);
fd[cpu][counter] = -1;
count[0] += single_count[0];
if (scale) {
count[1] += single_count[1];
count[2] += single_count[2];
}
}
scaled = 0;
if (scale) {
if (count[2] == 0) {
event_scaled[counter] = -1;
count[0] = 0;
return;
}
if (count[2] < count[1]) {
event_scaled[counter] = 1;
count[0] = (unsigned long long)
((double)count[0] * count[1] / count[2] + 0.5);
}
}
for (i = 0; i < 3; i++)
update_stats(&event_res_stats[counter][i], count[i]);
if (verbose) {
fprintf(stderr, "%s: %Ld %Ld %Ld\n", event_name(counter),
count[0], count[1], count[2]);
}
perf_counter tools: Also display time-normalized stat results Add new column that normalizes counter results by 'nanoseconds spent running' unit. Before: Performance counter stats for '/home/mingo/hackbench': 10469.403605 task clock ticks (msecs) 75502 context switches (events) 9501 CPU migrations (events) 36158 pagefaults (events) 31975676185 CPU cycles (events) 26257738659 instructions (events) 108740581 cache references (events) 54606088 cache misses (events) Wall-clock time elapsed: 810.514504 msecs After: Performance counter stats for '/home/mingo/hackbench': 10469.403605 task clock ticks (msecs) 75502 context switches # 0.007 M/sec 9501 CPU migrations # 0.001 M/sec 36158 pagefaults # 0.003 M/sec 31975676185 CPU cycles # 3054.202 M/sec 26257738659 instructions # 2508.045 M/sec 108740581 cache references # 10.387 M/sec 54606088 cache misses # 5.216 M/sec Wall-clock time elapsed: 810.514504 msecs The advantage of that column is that it is characteristic of the execution workflow, regardless of runtime. Hence 'hackbench 10' will look similar to 'hackbench 15' - while the absolute counter values are very different. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 07:10:54 +00:00
/*
* Save the full runtime - to allow normalization during printout:
*/
if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter))
update_stats(&runtime_nsecs_stats, count[0]);
if (MATCH_EVENT(HARDWARE, HW_CPU_CYCLES, counter))
update_stats(&runtime_cycles_stats, count[0]);
if (MATCH_EVENT(HARDWARE, HW_BRANCH_INSTRUCTIONS, counter))
update_stats(&runtime_branches_stats, count[0]);
}
static int run_perf_stat(int argc __used, const char **argv)
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
{
unsigned long long t0, t1;
int status = 0;
int counter;
int pid = target_pid;
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 11:13:21 +00:00
int child_ready_pipe[2], go_pipe[2];
const bool forks = (target_pid == -1 && argc > 0);
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 11:13:21 +00:00
char buf;
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
if (!system_wide)
nr_cpus = 1;
if (forks && (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0)) {
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 11:13:21 +00:00
perror("failed to create pipes");
exit(1);
}
if (forks) {
if ((pid = fork()) < 0)
perror("failed to fork");
if (!pid) {
close(child_ready_pipe[0]);
close(go_pipe[1]);
fcntl(go_pipe[0], F_SETFD, FD_CLOEXEC);
/*
* Do a dummy execvp to get the PLT entry resolved,
* so we avoid the resolver overhead on the real
* execvp call.
*/
execvp("", (char **)argv);
/*
* Tell the parent we're ready to go
*/
close(child_ready_pipe[1]);
/*
* Wait until the parent tells us to go.
*/
if (read(go_pipe[0], &buf, 1) == -1)
perror("unable to read pipe");
execvp(argv[0], (char **)argv);
perror(argv[0]);
exit(-1);
}
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 11:13:21 +00:00
child_pid = pid;
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 11:13:21 +00:00
/*
* Wait for the child to be ready to exec.
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 11:13:21 +00:00
*/
close(child_ready_pipe[1]);
close(go_pipe[0]);
if (read(child_ready_pipe[0], &buf, 1) == -1)
perror("unable to read pipe");
close(child_ready_pipe[0]);
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 11:13:21 +00:00
}
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
for (counter = 0; counter < nr_counters; counter++)
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 11:13:21 +00:00
create_perf_stat_counter(counter, pid);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
/*
* Enable counters and exec the command:
*/
t0 = rdclock();
if (forks) {
close(go_pipe[1]);
wait(&status);
} else {
while(!done);
}
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
t1 = rdclock();
update_stats(&walltime_nsecs_stats, t1 - t0);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
for (counter = 0; counter < nr_counters; counter++)
read_counter(counter);
return WEXITSTATUS(status);
}
static void print_noise(int counter, double avg)
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
{
if (run_count == 1)
return;
fprintf(stderr, " ( +- %7.3f%% )",
100 * stddev_stats(&event_res_stats[counter][0]) / avg);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
}
static void nsec_printout(int counter, double avg)
{
double msecs = avg / 1e6;
fprintf(stderr, " %14.6f %-24s", msecs, event_name(counter));
if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter)) {
fprintf(stderr, " # %10.3f CPUs ",
avg / avg_stats(&walltime_nsecs_stats));
}
}
static void abs_printout(int counter, double avg)
{
double total, ratio = 0.0;
fprintf(stderr, " %14.0f %-24s", avg, event_name(counter));
if (MATCH_EVENT(HARDWARE, HW_INSTRUCTIONS, counter)) {
total = avg_stats(&runtime_cycles_stats);
if (total)
ratio = avg / total;
fprintf(stderr, " # %10.3f IPC ", ratio);
} else if (MATCH_EVENT(HARDWARE, HW_BRANCH_MISSES, counter) &&
runtime_branches_stats.n != 0) {
total = avg_stats(&runtime_branches_stats);
if (total)
ratio = avg * 100 / total;
perf stat: Count branches first Count branches first, cache-misses second. The reason is that on x86 branches are not counted by all counters on all CPUs. Before: Performance counter stats for 'ls': 0.756653 task-clock-msecs # 0.802 CPUs 0 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 250 page-faults # 0.330 M/sec 2375725 cycles # 3139.781 M/sec 1628129 instructions # 0.685 IPC 19643 cache-references # 25.960 M/sec 4608 cache-misses # 6.090 M/sec 342532 branches # 452.694 M/sec <not counted> branch-misses 0.000943356 seconds time elapsed After: Performance counter stats for 'ls': 1.056734 task-clock-msecs # 0.859 CPUs 0 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 259 page-faults # 0.245 M/sec 3345932 cycles # 3166.295 M/sec 3074090 instructions # 0.919 IPC 616928 branches # 583.806 M/sec 39279 branch-misses # 6.367 % 21312 cache-references # 20.168 M/sec 3661 cache-misses # 3.464 M/sec 0.001230551 seconds time elapsed (also prettify the printout of branch misses, in case it's getting scaled.) Cc: Tim Blechmann <tim@klingt.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4ADC3975.8050109@klingt.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- tools/perf/builtin-stat.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index c373683..95a55ea 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -59,6 +59,8 @@ static struct perf_event_attr default_attrs[] = { { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES}, { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS}, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES }, }; --- tools/perf/builtin-stat.c | 20 ++++++++++---------- 1 files changed, 10 insertions(+), 10 deletions(-) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index 95a55ea..90e0a26 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -50,17 +50,17 @@ static struct perf_event_attr default_attrs[] = { - { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK }, - { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES}, - { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS }, - { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS }, - - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES }, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES}, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES }, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS}, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS }, + + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES }, };
2009-10-19 11:33:03 +00:00
fprintf(stderr, " # %10.3f %% ", ratio);
} else if (runtime_nsecs_stats.n != 0) {
total = avg_stats(&runtime_nsecs_stats);
if (total)
ratio = 1000.0 * avg / total;
fprintf(stderr, " # %10.3f M/sec", ratio);
}
}
/*
* Print out the results of a single counter:
*/
static void print_counter(int counter)
{
double avg = avg_stats(&event_res_stats[counter][0]);
int scaled = event_scaled[counter];
if (scaled == -1) {
fprintf(stderr, " %14s %-24s\n",
"<not counted>", event_name(counter));
return;
}
if (nsec_counter(counter))
nsec_printout(counter, avg);
else
abs_printout(counter, avg);
print_noise(counter, avg);
if (scaled) {
double avg_enabled, avg_running;
avg_enabled = avg_stats(&event_res_stats[counter][1]);
avg_running = avg_stats(&event_res_stats[counter][2]);
fprintf(stderr, " (scaled from %.2f%%)",
100 * avg_running / avg_enabled);
}
fprintf(stderr, "\n");
}
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
static void print_stat(int argc, const char **argv)
{
int i, counter;
fflush(stdout);
fprintf(stderr, "\n");
fprintf(stderr, " Performance counter stats for ");
if(target_pid == -1) {
fprintf(stderr, "\'%s", argv[0]);
for (i = 1; i < argc; i++)
fprintf(stderr, " %s", argv[i]);
}else
fprintf(stderr, "task pid \'%d", target_pid);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
fprintf(stderr, "\'");
if (run_count > 1)
fprintf(stderr, " (%d runs)", run_count);
fprintf(stderr, ":\n\n");
for (counter = 0; counter < nr_counters; counter++)
print_counter(counter);
fprintf(stderr, "\n");
fprintf(stderr, " %14.9f seconds time elapsed",
avg_stats(&walltime_nsecs_stats)/1e9);
if (run_count > 1) {
fprintf(stderr, " ( +- %7.3f%% )",
100*stddev_stats(&walltime_nsecs_stats) /
avg_stats(&walltime_nsecs_stats));
}
fprintf(stderr, "\n\n");
}
static volatile int signr = -1;
static void skip_signal(int signo)
{
if(target_pid != -1)
done = 1;
signr = signo;
}
static void sig_atexit(void)
{
if (child_pid != -1)
kill(child_pid, SIGTERM);
if (signr == -1)
return;
signal(signr, SIG_DFL);
kill(getpid(), signr);
}
static const char * const stat_usage[] = {
"perf stat [<options>] [<command>]",
NULL
};
static const struct option options[] = {
OPT_CALLBACK('e', "event", NULL, "event",
"event selector. use 'perf list' to list available events",
parse_events),
OPT_BOOLEAN('i', "inherit", &inherit,
"child tasks inherit counters"),
OPT_INTEGER('p', "pid", &target_pid,
"stat events on existing pid"),
OPT_BOOLEAN('a', "all-cpus", &system_wide,
"system-wide collection from all CPUs"),
OPT_BOOLEAN('c', "scale", &scale,
"scale/normalize counters"),
OPT_BOOLEAN('v', "verbose", &verbose,
"be more verbose (show counter open errors, etc)"),
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
OPT_INTEGER('r', "repeat", &run_count,
"repeat command and print average + stddev (max: 100)"),
OPT_BOOLEAN('n', "null", &null_run,
"null run - dont start any counters"),
OPT_END()
};
int cmd_stat(int argc, const char **argv, const char *prefix __used)
{
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
int status;
argc = parse_options(argc, argv, options, stat_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
if (!argc && target_pid == -1)
usage_with_options(stat_usage, options);
if (run_count <= 0)
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
usage_with_options(stat_usage, options);
/* Set attrs and nr_counters if no event is selected and !null_run */
if (!null_run && !nr_counters) {
memcpy(attrs, default_attrs, sizeof(default_attrs));
nr_counters = ARRAY_SIZE(default_attrs);
}
perf tools: Fix sparse CPU numbering related bugs At present, the perf subcommands that do system-wide monitoring (perf stat, perf record and perf top) don't work properly unless the online cpus are numbered 0, 1, ..., N-1. These tools ask for the number of online cpus with sysconf(_SC_NPROCESSORS_ONLN) and then try to create events for cpus 0, 1, ..., N-1. This creates problems for systems where the online cpus are numbered sparsely. For example, a POWER6 system in single-threaded mode (i.e. only running 1 hardware thread per core) will have only even-numbered cpus online. This fixes the problem by reading the /sys/devices/system/cpu/online file to find out which cpus are online. The code that does that is in tools/perf/util/cpumap.[ch], and consists of a read_cpu_map() function that sets up a cpumap[] array and returns the number of online cpus. If /sys/devices/system/cpu/online can't be read or can't be parsed successfully, it falls back to using sysconf to ask how many cpus are online and sets up an identity map in cpumap[]. The perf record, perf stat and perf top code then calls read_cpu_map() in the system-wide monitoring case (instead of sysconf) and uses cpumap[] to get the cpu numbers to pass to perf_event_open. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <20100310093609.GA3959@brick.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10 09:36:09 +00:00
if (system_wide)
nr_cpus = read_cpu_map();
else
nr_cpus = 1;
/*
* We dont want to block the signals - that would cause
* child tasks to inherit that and Ctrl-C would not work.
* What we want is for Ctrl-C to work in the exec()-ed
* task, but being ignored by perf stat itself:
*/
atexit(sig_atexit);
signal(SIGINT, skip_signal);
signal(SIGALRM, skip_signal);
signal(SIGABRT, skip_signal);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
status = 0;
for (run_idx = 0; run_idx < run_count; run_idx++) {
if (run_count != 1 && verbose)
fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx + 1);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:57:28 +00:00
status = run_perf_stat(argc, argv);
}
print_stat(argc, argv);
return status;
}