linux/arch/xtensa/kernel/entry.S

2142 lines
50 KiB
ArmAsm
Raw Normal View History

/*
* arch/xtensa/kernel/entry.S
*
* Low-level exception handling
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2004-2007 by Tensilica Inc.
*
* Chris Zankel <chris@zankel.net>
*
*/
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/processor.h>
#include <asm/thread_info.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <asm/ptrace.h>
#include <asm/current.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/signal.h>
#include <asm/tlbflush.h>
/* Unimplemented features. */
#undef SIGNAL_HANDLING_IN_DOUBLE_EXCEPTION
#undef KERNEL_STACK_OVERFLOW_CHECK
#undef PREEMPTIBLE_KERNEL
#undef ALLOCA_EXCEPTION_IN_IRAM
/* Not well tested.
*
* - fast_coprocessor
*/
/*
* Macro to find first bit set in WINDOWBASE from the left + 1
*
* 100....0 -> 1
* 010....0 -> 2
* 000....1 -> WSBITS
*/
.macro ffs_ws bit mask
#if XCHAL_HAVE_NSA
nsau \bit, \mask # 32-WSBITS ... 31 (32 iff 0)
addi \bit, \bit, WSBITS - 32 + 1 # uppest bit set -> return 1
#else
movi \bit, WSBITS
#if WSBITS > 16
_bltui \mask, 0x10000, 99f
addi \bit, \bit, -16
extui \mask, \mask, 16, 16
#endif
#if WSBITS > 8
99: _bltui \mask, 0x100, 99f
addi \bit, \bit, -8
srli \mask, \mask, 8
#endif
99: _bltui \mask, 0x10, 99f
addi \bit, \bit, -4
srli \mask, \mask, 4
99: _bltui \mask, 0x4, 99f
addi \bit, \bit, -2
srli \mask, \mask, 2
99: _bltui \mask, 0x2, 99f
addi \bit, \bit, -1
99:
#endif
.endm
/* ----------------- DEFAULT FIRST LEVEL EXCEPTION HANDLERS ----------------- */
/*
* First-level exception handler for user exceptions.
* Save some special registers, extra states and all registers in the AR
* register file that were in use in the user task, and jump to the common
* exception code.
* We save SAR (used to calculate WMASK), and WB and WS (we don't have to
* save them for kernel exceptions).
*
* Entry condition for user_exception:
*
* a0: trashed, original value saved on stack (PT_AREG0)
* a1: a1
* a2: new stack pointer, original value in depc
* a3: dispatch table
* depc: a2, original value saved on stack (PT_DEPC)
* excsave1: a3
*
* PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
* < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
*
* Entry condition for _user_exception:
*
* a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC
* excsave has been restored, and
* stack pointer (a1) has been set.
*
* Note: _user_exception might be at an odd adress. Don't use call0..call12
*/
ENTRY(user_exception)
/* Save a2, a3, and depc, restore excsave_1 and set SP. */
xsr a3, EXCSAVE_1
rsr a0, DEPC
s32i a1, a2, PT_AREG1
s32i a0, a2, PT_AREG2
s32i a3, a2, PT_AREG3
mov a1, a2
.globl _user_exception
_user_exception:
/* Save SAR and turn off single stepping */
movi a2, 0
rsr a3, SAR
xsr a2, ICOUNTLEVEL
s32i a3, a1, PT_SAR
s32i a2, a1, PT_ICOUNTLEVEL
/* Rotate ws so that the current windowbase is at bit0. */
/* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */
rsr a2, WINDOWBASE
rsr a3, WINDOWSTART
ssr a2
s32i a2, a1, PT_WINDOWBASE
s32i a3, a1, PT_WINDOWSTART
slli a2, a3, 32-WSBITS
src a2, a3, a2
srli a2, a2, 32-WSBITS
s32i a2, a1, PT_WMASK # needed for restoring registers
/* Save only live registers. */
_bbsi.l a2, 1, 1f
s32i a4, a1, PT_AREG4
s32i a5, a1, PT_AREG5
s32i a6, a1, PT_AREG6
s32i a7, a1, PT_AREG7
_bbsi.l a2, 2, 1f
s32i a8, a1, PT_AREG8
s32i a9, a1, PT_AREG9
s32i a10, a1, PT_AREG10
s32i a11, a1, PT_AREG11
_bbsi.l a2, 3, 1f
s32i a12, a1, PT_AREG12
s32i a13, a1, PT_AREG13
s32i a14, a1, PT_AREG14
s32i a15, a1, PT_AREG15
_bnei a2, 1, 1f # only one valid frame?
/* Only one valid frame, skip saving regs. */
j 2f
/* Save the remaining registers.
* We have to save all registers up to the first '1' from
* the right, except the current frame (bit 0).
* Assume a2 is: 001001000110001
* All register frames starting from the top field to the marked '1'
* must be saved.
*/
1: addi a3, a2, -1 # eliminate '1' in bit 0: yyyyxxww0
neg a3, a3 # yyyyxxww0 -> YYYYXXWW1+1
and a3, a3, a2 # max. only one bit is set
/* Find number of frames to save */
ffs_ws a0, a3 # number of frames to the '1' from left
/* Store information into WMASK:
* bits 0..3: xxx1 masked lower 4 bits of the rotated windowstart,
* bits 4...: number of valid 4-register frames
*/
slli a3, a0, 4 # number of frames to save in bits 8..4
extui a2, a2, 0, 4 # mask for the first 16 registers
or a2, a3, a2
s32i a2, a1, PT_WMASK # needed when we restore the reg-file
/* Save 4 registers at a time */
1: rotw -1
s32i a0, a5, PT_AREG_END - 16
s32i a1, a5, PT_AREG_END - 12
s32i a2, a5, PT_AREG_END - 8
s32i a3, a5, PT_AREG_END - 4
addi a0, a4, -1
addi a1, a5, -16
_bnez a0, 1b
/* WINDOWBASE still in SAR! */
rsr a2, SAR # original WINDOWBASE
movi a3, 1
ssl a2
sll a3, a3
wsr a3, WINDOWSTART # set corresponding WINDOWSTART bit
wsr a2, WINDOWBASE # and WINDOWSTART
rsync
/* We are back to the original stack pointer (a1) */
2:
#if XCHAL_EXTRA_SA_SIZE
/* For user exceptions, save the extra state into the user's TCB.
* Note: We must assume that xchal_extra_store_funcbody destroys a2..a15
*/
GET_CURRENT(a2,a1)
addi a2, a2, THREAD_CP_SAVE
xchal_extra_store_funcbody
#endif
/* Now, jump to the common exception handler. */
j common_exception
/*
* First-level exit handler for kernel exceptions
* Save special registers and the live window frame.
* Note: Even though we changes the stack pointer, we don't have to do a
* MOVSP here, as we do that when we return from the exception.
* (See comment in the kernel exception exit code)
*
* Entry condition for kernel_exception:
*
* a0: trashed, original value saved on stack (PT_AREG0)
* a1: a1
* a2: new stack pointer, original in DEPC
* a3: dispatch table
* depc: a2, original value saved on stack (PT_DEPC)
* excsave_1: a3
*
* PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
* < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
*
* Entry condition for _kernel_exception:
*
* a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC
* excsave has been restored, and
* stack pointer (a1) has been set.
*
* Note: _kernel_exception might be at an odd adress. Don't use call0..call12
*/
ENTRY(kernel_exception)
/* Save a0, a2, a3, DEPC and set SP. */
xsr a3, EXCSAVE_1 # restore a3, excsave_1
rsr a0, DEPC # get a2
s32i a1, a2, PT_AREG1
s32i a0, a2, PT_AREG2
s32i a3, a2, PT_AREG3
mov a1, a2
.globl _kernel_exception
_kernel_exception:
/* Save SAR and turn off single stepping */
movi a2, 0
rsr a3, SAR
xsr a2, ICOUNTLEVEL
s32i a3, a1, PT_SAR
s32i a2, a1, PT_ICOUNTLEVEL
/* Rotate ws so that the current windowbase is at bit0. */
/* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */
rsr a2, WINDOWBASE # don't need to save these, we only
rsr a3, WINDOWSTART # need shifted windowstart: windowmask
ssr a2
slli a2, a3, 32-WSBITS
src a2, a3, a2
srli a2, a2, 32-WSBITS
s32i a2, a1, PT_WMASK # needed for kernel_exception_exit
/* Save only the live window-frame */
_bbsi.l a2, 1, 1f
s32i a4, a1, PT_AREG4
s32i a5, a1, PT_AREG5
s32i a6, a1, PT_AREG6
s32i a7, a1, PT_AREG7
_bbsi.l a2, 2, 1f
s32i a8, a1, PT_AREG8
s32i a9, a1, PT_AREG9
s32i a10, a1, PT_AREG10
s32i a11, a1, PT_AREG11
_bbsi.l a2, 3, 1f
s32i a12, a1, PT_AREG12
s32i a13, a1, PT_AREG13
s32i a14, a1, PT_AREG14
s32i a15, a1, PT_AREG15
1:
#ifdef KERNEL_STACK_OVERFLOW_CHECK
/* Stack overflow check, for debugging */
extui a2, a1, TASK_SIZE_BITS,XX
movi a3, SIZE??
_bge a2, a3, out_of_stack_panic
#endif
/*
* This is the common exception handler.
* We get here from the user exception handler or simply by falling through
* from the kernel exception handler.
* Save the remaining special registers, switch to kernel mode, and jump
* to the second-level exception handler.
*
*/
common_exception:
/* Save some registers, disable loops and clear the syscall flag. */
rsr a2, DEBUGCAUSE
rsr a3, EPC_1
s32i a2, a1, PT_DEBUGCAUSE
s32i a3, a1, PT_PC
movi a2, -1
rsr a3, EXCVADDR
s32i a2, a1, PT_SYSCALL
movi a2, 0
s32i a3, a1, PT_EXCVADDR
xsr a2, LCOUNT
s32i a2, a1, PT_LCOUNT
/* It is now save to restore the EXC_TABLE_FIXUP variable. */
rsr a0, EXCCAUSE
movi a3, 0
rsr a2, EXCSAVE_1
s32i a0, a1, PT_EXCCAUSE
s32i a3, a2, EXC_TABLE_FIXUP
/* All unrecoverable states are saved on stack, now, and a1 is valid,
* so we can allow exceptions and interrupts (*) again.
* Set PS(EXCM = 0, UM = 0, RING = 0, OWB = 0, WOE = 1, INTLEVEL = X)
*
* (*) We only allow interrupts if PS.INTLEVEL was not set to 1 before
* (interrupts disabled) and if this exception is not an interrupt.
*/
rsr a3, PS
addi a0, a0, -4
movi a2, 1
extui a3, a3, 0, 1 # a3 = PS.INTLEVEL[0]
moveqz a3, a2, a0 # a3 = 1 iff interrupt exception
movi a2, 1 << PS_WOE_BIT
or a3, a3, a2
rsr a0, EXCCAUSE
xsr a3, PS
s32i a3, a1, PT_PS # save ps
/* Save LBEG, LEND */
rsr a2, LBEG
rsr a3, LEND
s32i a2, a1, PT_LBEG
s32i a3, a1, PT_LEND
/* Go to second-level dispatcher. Set up parameters to pass to the
* exception handler and call the exception handler.
*/
movi a4, exc_table
mov a6, a1 # pass stack frame
mov a7, a0 # pass EXCCAUSE
addx4 a4, a0, a4
l32i a4, a4, EXC_TABLE_DEFAULT # load handler
/* Call the second-level handler */
callx4 a4
/* Jump here for exception exit */
common_exception_return:
/* Jump if we are returning from kernel exceptions. */
1: l32i a3, a1, PT_PS
_bbsi.l a3, PS_UM_BIT, 2f
j kernel_exception_exit
/* Specific to a user exception exit:
* We need to check some flags for signal handling and rescheduling,
* and have to restore WB and WS, extra states, and all registers
* in the register file that were in use in the user task.
*/
2: wsr a3, PS /* disable interrupts */
/* Check for signals (keep interrupts disabled while we read TI_FLAGS)
* Note: PS.INTLEVEL = 0, PS.EXCM = 1
*/
GET_THREAD_INFO(a2,a1)
l32i a4, a2, TI_FLAGS
/* Enable interrupts again.
* Note: When we get here, we certainly have handled any interrupts.
* (Hint: There is only one user exception frame on stack)
*/
movi a3, 1 << PS_WOE_BIT
_bbsi.l a4, TIF_NEED_RESCHED, 3f
_bbci.l a4, TIF_SIGPENDING, 4f
#ifndef SIGNAL_HANDLING_IN_DOUBLE_EXCEPTION
l32i a4, a1, PT_DEPC
bgeui a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 4f
#endif
/* Reenable interrupts and call do_signal() */
wsr a3, PS
movi a4, do_signal # int do_signal(struct pt_regs*, sigset_t*)
mov a6, a1
movi a7, 0
callx4 a4
j 1b
3: /* Reenable interrupts and reschedule */
wsr a3, PS
movi a4, schedule # void schedule (void)
callx4 a4
j 1b
/* Restore the state of the task and return from the exception. */
4: /* a2 holds GET_CURRENT(a2,a1) */
#if XCHAL_EXTRA_SA_SIZE
/* For user exceptions, restore the extra state from the user's TCB. */
/* Note: a2 still contains GET_CURRENT(a2,a1) */
addi a2, a2, THREAD_CP_SAVE
xchal_extra_load_funcbody
/* We must assume that xchal_extra_store_funcbody destroys
* registers a2..a15. FIXME, this list can eventually be
* reduced once real register requirements of the macro are
* finalized. */
#endif /* XCHAL_EXTRA_SA_SIZE */
/* Switch to the user thread WINDOWBASE. Save SP temporarily in DEPC */
l32i a2, a1, PT_WINDOWBASE
l32i a3, a1, PT_WINDOWSTART
wsr a1, DEPC # use DEPC as temp storage
wsr a3, WINDOWSTART # restore WINDOWSTART
ssr a2 # preserve user's WB in the SAR
wsr a2, WINDOWBASE # switch to user's saved WB
rsync
rsr a1, DEPC # restore stack pointer
l32i a2, a1, PT_WMASK # register frames saved (in bits 4...9)
rotw -1 # we restore a4..a7
_bltui a6, 16, 1f # only have to restore current window?
/* The working registers are a0 and a3. We are restoring to
* a4..a7. Be careful not to destroy what we have just restored.
* Note: wmask has the format YYYYM:
* Y: number of registers saved in groups of 4
* M: 4 bit mask of first 16 registers
*/
mov a2, a6
mov a3, a5
2: rotw -1 # a0..a3 become a4..a7
addi a3, a7, -4*4 # next iteration
addi a2, a6, -16 # decrementing Y in WMASK
l32i a4, a3, PT_AREG_END + 0
l32i a5, a3, PT_AREG_END + 4
l32i a6, a3, PT_AREG_END + 8
l32i a7, a3, PT_AREG_END + 12
_bgeui a2, 16, 2b
/* Clear unrestored registers (don't leak anything to user-land */
1: rsr a0, WINDOWBASE
rsr a3, SAR
sub a3, a0, a3
beqz a3, 2f
extui a3, a3, 0, WBBITS
1: rotw -1
addi a3, a7, -1
movi a4, 0
movi a5, 0
movi a6, 0
movi a7, 0
bgei a3, 1, 1b
/* We are back were we were when we started.
* Note: a2 still contains WMASK (if we've returned to the original
* frame where we had loaded a2), or at least the lower 4 bits
* (if we have restored WSBITS-1 frames).
*/
2: j common_exception_exit
/* This is the kernel exception exit.
* We avoided to do a MOVSP when we entered the exception, but we
* have to do it here.
*/
kernel_exception_exit:
/* Disable interrupts (a3 holds PT_PS) */
wsr a3, PS
#ifdef PREEMPTIBLE_KERNEL
#ifdef CONFIG_PREEMPT
/*
* Note: We've just returned from a call4, so we have
* at least 4 addt'l regs.
*/
/* Check current_thread_info->preempt_count */
GET_THREAD_INFO(a2)
l32i a3, a2, TI_PREEMPT
bnez a3, 1f
l32i a2, a2, TI_FLAGS
1:
#endif
#endif
/* Check if we have to do a movsp.
*
* We only have to do a movsp if the previous window-frame has
* been spilled to the *temporary* exception stack instead of the
* task's stack. This is the case if the corresponding bit in
* WINDOWSTART for the previous window-frame was set before
* (not spilled) but is zero now (spilled).
* If this bit is zero, all other bits except the one for the
* current window frame are also zero. So, we can use a simple test:
* 'and' WINDOWSTART and WINDOWSTART-1:
*
* (XXXXXX1[0]* - 1) AND XXXXXX1[0]* = XXXXXX0[0]*
*
* The result is zero only if one bit was set.
*
* (Note: We might have gone through several task switches before
* we come back to the current task, so WINDOWBASE might be
* different from the time the exception occurred.)
*/
/* Test WINDOWSTART before and after the exception.
* We actually have WMASK, so we only have to test if it is 1 or not.
*/
l32i a2, a1, PT_WMASK
_beqi a2, 1, common_exception_exit # Spilled before exception,jump
/* Test WINDOWSTART now. If spilled, do the movsp */
rsr a3, WINDOWSTART
addi a0, a3, -1
and a3, a3, a0
_bnez a3, common_exception_exit
/* Do a movsp (we returned from a call4, so we have at least a0..a7) */
addi a0, a1, -16
l32i a3, a0, 0
l32i a4, a0, 4
s32i a3, a1, PT_SIZE+0
s32i a4, a1, PT_SIZE+4
l32i a3, a0, 8
l32i a4, a0, 12
s32i a3, a1, PT_SIZE+8
s32i a4, a1, PT_SIZE+12
/* Common exception exit.
* We restore the special register and the current window frame, and
* return from the exception.
*
* Note: We expect a2 to hold PT_WMASK
*/
common_exception_exit:
_bbsi.l a2, 1, 1f
l32i a4, a1, PT_AREG4
l32i a5, a1, PT_AREG5
l32i a6, a1, PT_AREG6
l32i a7, a1, PT_AREG7
_bbsi.l a2, 2, 1f
l32i a8, a1, PT_AREG8
l32i a9, a1, PT_AREG9
l32i a10, a1, PT_AREG10
l32i a11, a1, PT_AREG11
_bbsi.l a2, 3, 1f
l32i a12, a1, PT_AREG12
l32i a13, a1, PT_AREG13
l32i a14, a1, PT_AREG14
l32i a15, a1, PT_AREG15
/* Restore PC, SAR */
1: l32i a2, a1, PT_PC
l32i a3, a1, PT_SAR
wsr a2, EPC_1
wsr a3, SAR
/* Restore LBEG, LEND, LCOUNT */
l32i a2, a1, PT_LBEG
l32i a3, a1, PT_LEND
wsr a2, LBEG
l32i a2, a1, PT_LCOUNT
wsr a3, LEND
wsr a2, LCOUNT
/* We control single stepping through the ICOUNTLEVEL register. */
l32i a2, a1, PT_ICOUNTLEVEL
movi a3, -2
wsr a2, ICOUNTLEVEL
wsr a3, ICOUNT
/* Check if it was double exception. */
l32i a0, a1, PT_DEPC
l32i a3, a1, PT_AREG3
l32i a2, a1, PT_AREG2
_bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
/* Restore a0...a3 and return */
l32i a0, a1, PT_AREG0
l32i a1, a1, PT_AREG1
rfe
1: wsr a0, DEPC
l32i a0, a1, PT_AREG0
l32i a1, a1, PT_AREG1
rfde
/*
* Debug exception handler.
*
* Currently, we don't support KGDB, so only user application can be debugged.
*
* When we get here, a0 is trashed and saved to excsave[debuglevel]
*/
ENTRY(debug_exception)
rsr a0, EPS + XCHAL_DEBUGLEVEL
bbsi.l a0, PS_EXCM_BIT, 1f # exception mode
/* Set EPC_1 and EXCCAUSE */
wsr a2, DEPC # save a2 temporarily
rsr a2, EPC + XCHAL_DEBUGLEVEL
wsr a2, EPC_1
movi a2, EXCCAUSE_MAPPED_DEBUG
wsr a2, EXCCAUSE
/* Restore PS to the value before the debug exc but with PS.EXCM set.*/
movi a2, 1 << PS_EXCM_BIT
or a2, a0, a2
movi a0, debug_exception # restore a3, debug jump vector
wsr a2, PS
xsr a0, EXCSAVE + XCHAL_DEBUGLEVEL
/* Switch to kernel/user stack, restore jump vector, and save a0 */
bbsi.l a2, PS_UM_BIT, 2f # jump if user mode
addi a2, a1, -16-PT_SIZE # assume kernel stack
s32i a0, a2, PT_AREG0
movi a0, 0
s32i a1, a2, PT_AREG1
s32i a0, a2, PT_DEPC # mark it as a regular exception
xsr a0, DEPC
s32i a3, a2, PT_AREG3
s32i a0, a2, PT_AREG2
mov a1, a2
j _kernel_exception
2: rsr a2, EXCSAVE_1
l32i a2, a2, EXC_TABLE_KSTK # load kernel stack pointer
s32i a0, a2, PT_AREG0
movi a0, 0
s32i a1, a2, PT_AREG1
s32i a0, a2, PT_DEPC
xsr a0, DEPC
s32i a3, a2, PT_AREG3
s32i a0, a2, PT_AREG2
mov a1, a2
j _user_exception
/* Debug exception while in exception mode. */
1: j 1b // FIXME!!
/*
* We get here in case of an unrecoverable exception.
* The only thing we can do is to be nice and print a panic message.
* We only produce a single stack frame for panic, so ???
*
*
* Entry conditions:
*
* - a0 contains the caller address; original value saved in excsave1.
* - the original a0 contains a valid return address (backtrace) or 0.
* - a2 contains a valid stackpointer
*
* Notes:
*
* - If the stack pointer could be invalid, the caller has to setup a
* dummy stack pointer (e.g. the stack of the init_task)
*
* - If the return address could be invalid, the caller has to set it
* to 0, so the backtrace would stop.
*
*/
.align 4
unrecoverable_text:
.ascii "Unrecoverable error in exception handler\0"
ENTRY(unrecoverable_exception)
movi a0, 1
movi a1, 0
wsr a0, WINDOWSTART
wsr a1, WINDOWBASE
rsync
movi a1, (1 << PS_WOE_BIT) | 1
wsr a1, PS
rsync
movi a1, init_task
movi a0, 0
addi a1, a1, PT_REGS_OFFSET
movi a4, panic
movi a6, unrecoverable_text
callx4 a4
1: j 1b
/* -------------------------- FAST EXCEPTION HANDLERS ----------------------- */
/*
* Fast-handler for alloca exceptions
*
* The ALLOCA handler is entered when user code executes the MOVSP
* instruction and the caller's frame is not in the register file.
* In this case, the caller frame's a0..a3 are on the stack just
* below sp (a1), and this handler moves them.
*
* For "MOVSP <ar>,<as>" without destination register a1, this routine
* simply moves the value from <as> to <ar> without moving the save area.
*
* Entry condition:
*
* a0: trashed, original value saved on stack (PT_AREG0)
* a1: a1
* a2: new stack pointer, original in DEPC
* a3: dispatch table
* depc: a2, original value saved on stack (PT_DEPC)
* excsave_1: a3
*
* PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
* < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
*/
#if XCHAL_HAVE_BE
#define _EXTUI_MOVSP_SRC(ar) extui ar, ar, 4, 4
#define _EXTUI_MOVSP_DST(ar) extui ar, ar, 0, 4
#else
#define _EXTUI_MOVSP_SRC(ar) extui ar, ar, 0, 4
#define _EXTUI_MOVSP_DST(ar) extui ar, ar, 4, 4
#endif
ENTRY(fast_alloca)
/* We shouldn't be in a double exception. */
l32i a0, a2, PT_DEPC
_bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lunhandled_double
rsr a0, DEPC # get a2
s32i a4, a2, PT_AREG4 # save a4 and
s32i a0, a2, PT_AREG2 # a2 to stack
/* Exit critical section. */
movi a0, 0
s32i a0, a3, EXC_TABLE_FIXUP
/* Restore a3, excsave_1 */
xsr a3, EXCSAVE_1 # make sure excsave_1 is valid for dbl.
rsr a4, EPC_1 # get exception address
s32i a3, a2, PT_AREG3 # save a3 to stack
#ifdef ALLOCA_EXCEPTION_IN_IRAM
#error iram not supported
#else
/* Note: l8ui not allowed in IRAM/IROM!! */
l8ui a0, a4, 1 # read as(src) from MOVSP instruction
#endif
movi a3, .Lmovsp_src
_EXTUI_MOVSP_SRC(a0) # extract source register number
addx8 a3, a0, a3
jx a3
.Lunhandled_double:
wsr a0, EXCSAVE_1
movi a0, unrecoverable_exception
callx0 a0
.align 8
.Lmovsp_src:
l32i a3, a2, PT_AREG0; _j 1f; .align 8
mov a3, a1; _j 1f; .align 8
l32i a3, a2, PT_AREG2; _j 1f; .align 8
l32i a3, a2, PT_AREG3; _j 1f; .align 8
l32i a3, a2, PT_AREG4; _j 1f; .align 8
mov a3, a5; _j 1f; .align 8
mov a3, a6; _j 1f; .align 8
mov a3, a7; _j 1f; .align 8
mov a3, a8; _j 1f; .align 8
mov a3, a9; _j 1f; .align 8
mov a3, a10; _j 1f; .align 8
mov a3, a11; _j 1f; .align 8
mov a3, a12; _j 1f; .align 8
mov a3, a13; _j 1f; .align 8
mov a3, a14; _j 1f; .align 8
mov a3, a15; _j 1f; .align 8
1:
#ifdef ALLOCA_EXCEPTION_IN_IRAM
#error iram not supported
#else
l8ui a0, a4, 0 # read ar(dst) from MOVSP instruction
#endif
addi a4, a4, 3 # step over movsp
_EXTUI_MOVSP_DST(a0) # extract destination register
wsr a4, EPC_1 # save new epc_1
_bnei a0, 1, 1f # no 'movsp a1, ax': jump
/* Move the save area. This implies the use of the L32E
* and S32E instructions, because this move must be done with
* the user's PS.RING privilege levels, not with ring 0
* (kernel's) privileges currently active with PS.EXCM
* set. Note that we have stil registered a fixup routine with the
* double exception vector in case a double exception occurs.
*/
/* a0,a4:avail a1:old user stack a2:exc. stack a3:new user stack. */
l32e a0, a1, -16
l32e a4, a1, -12
s32e a0, a3, -16
s32e a4, a3, -12
l32e a0, a1, -8
l32e a4, a1, -4
s32e a0, a3, -8
s32e a4, a3, -4
/* Restore stack-pointer and all the other saved registers. */
mov a1, a3
l32i a4, a2, PT_AREG4
l32i a3, a2, PT_AREG3
l32i a0, a2, PT_AREG0
l32i a2, a2, PT_AREG2
rfe
/* MOVSP <at>,<as> was invoked with <at> != a1.
* Because the stack pointer is not being modified,
* we should be able to just modify the pointer
* without moving any save area.
* The processor only traps these occurrences if the
* caller window isn't live, so unfortunately we can't
* use this as an alternate trap mechanism.
* So we just do the move. This requires that we
* resolve the destination register, not just the source,
* so there's some extra work.
* (PERHAPS NOT REALLY NEEDED, BUT CLEANER...)
*/
/* a0 dst-reg, a1 user-stack, a2 stack, a3 value of src reg. */
1: movi a4, .Lmovsp_dst
addx8 a4, a0, a4
jx a4
.align 8
.Lmovsp_dst:
s32i a3, a2, PT_AREG0; _j 1f; .align 8
mov a1, a3; _j 1f; .align 8
s32i a3, a2, PT_AREG2; _j 1f; .align 8
s32i a3, a2, PT_AREG3; _j 1f; .align 8
s32i a3, a2, PT_AREG4; _j 1f; .align 8
mov a5, a3; _j 1f; .align 8
mov a6, a3; _j 1f; .align 8
mov a7, a3; _j 1f; .align 8
mov a8, a3; _j 1f; .align 8
mov a9, a3; _j 1f; .align 8
mov a10, a3; _j 1f; .align 8
mov a11, a3; _j 1f; .align 8
mov a12, a3; _j 1f; .align 8
mov a13, a3; _j 1f; .align 8
mov a14, a3; _j 1f; .align 8
mov a15, a3; _j 1f; .align 8
1: l32i a4, a2, PT_AREG4
l32i a3, a2, PT_AREG3
l32i a0, a2, PT_AREG0
l32i a2, a2, PT_AREG2
rfe
/*
* fast system calls.
*
* WARNING: The kernel doesn't save the entire user context before
* handling a fast system call. These functions are small and short,
* usually offering some functionality not available to user tasks.
*
* BE CAREFUL TO PRESERVE THE USER'S CONTEXT.
*
* Entry condition:
*
* a0: trashed, original value saved on stack (PT_AREG0)
* a1: a1
* a2: new stack pointer, original in DEPC
* a3: dispatch table
* depc: a2, original value saved on stack (PT_DEPC)
* excsave_1: a3
*/
ENTRY(fast_syscall_kernel)
/* Skip syscall. */
rsr a0, EPC_1
addi a0, a0, 3
wsr a0, EPC_1
l32i a0, a2, PT_DEPC
bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_syscall_unrecoverable
rsr a0, DEPC # get syscall-nr
_beqz a0, fast_syscall_spill_registers
_beqi a0, __NR_xtensa, fast_syscall_xtensa
j kernel_exception
ENTRY(fast_syscall_user)
/* Skip syscall. */
rsr a0, EPC_1
addi a0, a0, 3
wsr a0, EPC_1
l32i a0, a2, PT_DEPC
bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_syscall_unrecoverable
rsr a0, DEPC # get syscall-nr
_beqz a0, fast_syscall_spill_registers
_beqi a0, __NR_xtensa, fast_syscall_xtensa
j user_exception
ENTRY(fast_syscall_unrecoverable)
/* Restore all states. */
l32i a0, a2, PT_AREG0 # restore a0
xsr a2, DEPC # restore a2, depc
rsr a3, EXCSAVE_1
wsr a0, EXCSAVE_1
movi a0, unrecoverable_exception
callx0 a0
/*
* sysxtensa syscall handler
*
* int sysxtensa (SYS_XTENSA_ATOMIC_SET, ptr, val, unused);
* int sysxtensa (SYS_XTENSA_ATOMIC_ADD, ptr, val, unused);
* int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val, unused);
* int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval);
* a2 a6 a3 a4 a5
*
* Entry condition:
*
* a0: a2 (syscall-nr), original value saved on stack (PT_AREG0)
* a1: a1
* a2: new stack pointer, original in a0 and DEPC
* a3: dispatch table, original in excsave_1
* a4..a15: unchanged
* depc: a2, original value saved on stack (PT_DEPC)
* excsave_1: a3
*
* PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
* < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
*
* Note: we don't have to save a2; a2 holds the return value
*
* We use the two macros TRY and CATCH:
*
* TRY adds an entry to the __ex_table fixup table for the immediately
* following instruction.
*
* CATCH catches any exception that occurred at one of the preceeding TRY
* statements and continues from there
*
* Usage TRY l32i a0, a1, 0
* <other code>
* done: rfe
* CATCH <set return code>
* j done
*/
#define TRY \
.section __ex_table, "a"; \
.word 66f, 67f; \
.text; \
66:
#define CATCH \
67:
ENTRY(fast_syscall_xtensa)
xsr a3, EXCSAVE_1 # restore a3, excsave1
s32i a7, a2, PT_AREG7 # we need an additional register
movi a7, 4 # sizeof(unsigned int)
access_ok a3, a7, a0, a2, .Leac # a0: scratch reg, a2: sp
addi a6, a6, -1 # assuming SYS_XTENSA_ATOMIC_SET = 1
_bgeui a6, SYS_XTENSA_COUNT - 1, .Lill
_bnei a6, SYS_XTENSA_ATOMIC_CMP_SWP - 1, .Lnswp
/* Fall through for ATOMIC_CMP_SWP. */
.Lswp: /* Atomic compare and swap */
TRY l32i a0, a3, 0 # read old value
bne a0, a4, 1f # same as old value? jump
TRY s32i a5, a3, 0 # different, modify value
l32i a7, a2, PT_AREG7 # restore a7
l32i a0, a2, PT_AREG0 # restore a0
movi a2, 1 # and return 1
addi a6, a6, 1 # restore a6 (really necessary?)
rfe
1: l32i a7, a2, PT_AREG7 # restore a7
l32i a0, a2, PT_AREG0 # restore a0
movi a2, 0 # return 0 (note that we cannot set
addi a6, a6, 1 # restore a6 (really necessary?)
rfe
.Lnswp: /* Atomic set, add, and exg_add. */
TRY l32i a7, a3, 0 # orig
add a0, a4, a7 # + arg
moveqz a0, a4, a6 # set
TRY s32i a0, a3, 0 # write new value
mov a0, a2
mov a2, a7
l32i a7, a0, PT_AREG7 # restore a7
l32i a0, a0, PT_AREG0 # restore a0
addi a6, a6, 1 # restore a6 (really necessary?)
rfe
CATCH
.Leac: l32i a7, a2, PT_AREG7 # restore a7
l32i a0, a2, PT_AREG0 # restore a0
movi a2, -EFAULT
rfe
.Lill: l32i a7, a2, PT_AREG0 # restore a7
l32i a0, a2, PT_AREG0 # restore a0
movi a2, -EINVAL
rfe
/* fast_syscall_spill_registers.
*
* Entry condition:
*
* a0: trashed, original value saved on stack (PT_AREG0)
* a1: a1
* a2: new stack pointer, original in DEPC
* a3: dispatch table
* depc: a2, original value saved on stack (PT_DEPC)
* excsave_1: a3
*
* Note: We assume the stack pointer is EXC_TABLE_KSTK in the fixup handler.
* Note: We don't need to save a2 in depc (return value)
*/
ENTRY(fast_syscall_spill_registers)
/* Register a FIXUP handler (pass current wb as a parameter) */
movi a0, fast_syscall_spill_registers_fixup
s32i a0, a3, EXC_TABLE_FIXUP
rsr a0, WINDOWBASE
s32i a0, a3, EXC_TABLE_PARAM
/* Save a3 and SAR on stack. */
rsr a0, SAR
xsr a3, EXCSAVE_1 # restore a3 and excsave_1
s32i a0, a2, PT_AREG4 # store SAR to PT_AREG4
s32i a3, a2, PT_AREG3
/* The spill routine might clobber a7, a11, and a15. */
s32i a7, a2, PT_AREG5
s32i a11, a2, PT_AREG6
s32i a15, a2, PT_AREG7
call0 _spill_registers # destroys a3, DEPC, and SAR
/* Advance PC, restore registers and SAR, and return from exception. */
l32i a3, a2, PT_AREG4
l32i a0, a2, PT_AREG0
wsr a3, SAR
l32i a3, a2, PT_AREG3
/* Restore clobbered registers. */
l32i a7, a2, PT_AREG5
l32i a11, a2, PT_AREG6
l32i a15, a2, PT_AREG7
movi a2, 0
rfe
/* Fixup handler.
*
* We get here if the spill routine causes an exception, e.g. tlb miss.
* We basically restore WINDOWBASE and WINDOWSTART to the condition when
* we entered the spill routine and jump to the user exception handler.
*
* a0: value of depc, original value in depc
* a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE
* a3: exctable, original value in excsave1
*/
fast_syscall_spill_registers_fixup:
rsr a2, WINDOWBASE # get current windowbase (a2 is saved)
xsr a0, DEPC # restore depc and a0
ssl a2 # set shift (32 - WB)
/* We need to make sure the current registers (a0-a3) are preserved.
* To do this, we simply set the bit for the current window frame
* in WS, so that the exception handlers save them to the task stack.
*/
rsr a3, EXCSAVE_1 # get spill-mask
slli a2, a3, 1 # shift left by one
slli a3, a2, 32-WSBITS
src a2, a2, a3 # a1 = xxwww1yyxxxwww1yy......
wsr a2, WINDOWSTART # set corrected windowstart
movi a3, exc_table
l32i a2, a3, EXC_TABLE_DOUBLE_SAVE # restore a2
l32i a3, a3, EXC_TABLE_PARAM # original WB (in user task)
/* Return to the original (user task) WINDOWBASE.
* We leave the following frame behind:
* a0, a1, a2 same
* a3: trashed (saved in excsave_1)
* depc: depc (we have to return to that address)
* excsave_1: a3
*/
wsr a3, WINDOWBASE
rsync
/* We are now in the original frame when we entered _spill_registers:
* a0: return address
* a1: used, stack pointer
* a2: kernel stack pointer
* a3: available, saved in EXCSAVE_1
* depc: exception address
* excsave: a3
* Note: This frame might be the same as above.
*/
#ifdef SIGNAL_HANDLING_IN_DOUBLE_EXCEPTION
/* Restore registers we precautiously saved.
* We have the value of the 'right' a3
*/
l32i a7, a2, PT_AREG5
l32i a11, a2, PT_AREG6
l32i a15, a2, PT_AREG7
#endif
/* Setup stack pointer. */
addi a2, a2, -PT_USER_SIZE
s32i a0, a2, PT_AREG0
/* Make sure we return to this fixup handler. */
movi a3, fast_syscall_spill_registers_fixup_return
s32i a3, a2, PT_DEPC # setup depc
/* Jump to the exception handler. */
movi a3, exc_table
rsr a0, EXCCAUSE
addx4 a0, a0, a3 # find entry in table
l32i a0, a0, EXC_TABLE_FAST_USER # load handler
jx a0
fast_syscall_spill_registers_fixup_return:
/* When we return here, all registers have been restored (a2: DEPC) */
wsr a2, DEPC # exception address
/* Restore fixup handler. */
xsr a3, EXCSAVE_1
movi a2, fast_syscall_spill_registers_fixup
s32i a2, a3, EXC_TABLE_FIXUP
rsr a2, WINDOWBASE
s32i a2, a3, EXC_TABLE_PARAM
l32i a2, a3, EXC_TABLE_KSTK
#ifdef SIGNAL_HANDLING_IN_DOUBLE_EXCEPTION
/* Save registers again that might be clobbered. */
s32i a7, a2, PT_AREG5
s32i a11, a2, PT_AREG6
s32i a15, a2, PT_AREG7
#endif
/* Load WB at the time the exception occurred. */
rsr a3, SAR # WB is still in SAR
neg a3, a3
wsr a3, WINDOWBASE
rsync
/* Restore a3 and return. */
movi a3, exc_table
xsr a3, EXCSAVE_1
rfde
/*
* spill all registers.
*
* This is not a real function. The following conditions must be met:
*
* - must be called with call0.
* - uses DEPC, a3 and SAR.
* - the last 'valid' register of each frame are clobbered.
* - the caller must have registered a fixup handler
* (or be inside a critical section)
* - PS_EXCM must be set (PS_WOE cleared?)
*/
ENTRY(_spill_registers)
/*
* Rotate ws so that the current windowbase is at bit 0.
* Assume ws = xxxwww1yy (www1 current window frame).
* Rotate ws right so that a2 = yyxxxwww1.
*/
wsr a2, DEPC # preserve a2
rsr a2, WINDOWBASE
rsr a3, WINDOWSTART
ssr a2 # holds WB
slli a2, a3, WSBITS
or a3, a3, a2 # a2 = xxxwww1yyxxxwww1yy
srl a3, a3
/* We are done if there are no more than the current register frame. */
extui a3, a3, 1, WSBITS-2 # a3 = 0yyxxxwww
movi a2, (1 << (WSBITS-1))
_beqz a3, .Lnospill # only one active frame? jump
/* We want 1 at the top, so that we return to the current windowbase */
or a3, a3, a2 # 1yyxxxwww
/* Skip empty frames - get 'oldest' WINDOWSTART-bit. */
wsr a3, WINDOWSTART # save shifted windowstart
neg a2, a3
and a3, a2, a3 # first bit set from right: 000010000
ffs_ws a2, a3 # a2: shifts to skip empty frames
movi a3, WSBITS
sub a2, a3, a2 # WSBITS-a2:number of 0-bits from right
ssr a2 # save in SAR for later.
rsr a3, WINDOWBASE
add a3, a3, a2
rsr a2, DEPC # restore a2
wsr a3, WINDOWBASE
rsync
rsr a3, WINDOWSTART
srl a3, a3 # shift windowstart
/* WB is now just one frame below the oldest frame in the register
window. WS is shifted so the oldest frame is in bit 0, thus, WB
and WS differ by one 4-register frame. */
/* Save frames. Depending what call was used (call4, call8, call12),
* we have to save 4,8. or 12 registers.
*/
_bbsi.l a3, 1, .Lc4
_bbsi.l a3, 2, .Lc8
/* Special case: we have a call12-frame starting at a4. */
_bbci.l a3, 3, .Lc12 # bit 3 shouldn't be zero! (Jump to Lc12 first)
s32e a4, a1, -16 # a1 is valid with an empty spill area
l32e a4, a5, -12
s32e a8, a4, -48
mov a8, a4
l32e a4, a1, -16
j .Lc12c
.Lloop: _bbsi.l a3, 1, .Lc4
_bbci.l a3, 2, .Lc12
.Lc8: s32e a4, a13, -16
l32e a4, a5, -12
s32e a8, a4, -32
s32e a5, a13, -12
s32e a6, a13, -8
s32e a7, a13, -4
s32e a9, a4, -28
s32e a10, a4, -24
s32e a11, a4, -20
srli a11, a3, 2 # shift windowbase by 2
rotw 2
_bnei a3, 1, .Lloop
.Lexit: /* Done. Do the final rotation, set WS, and return. */
rotw 1
rsr a3, WINDOWBASE
ssl a3
movi a3, 1
sll a3, a3
wsr a3, WINDOWSTART
.Lnospill:
jx a0
.Lc4: s32e a4, a9, -16
s32e a5, a9, -12
s32e a6, a9, -8
s32e a7, a9, -4
srli a7, a3, 1
rotw 1
_bnei a3, 1, .Lloop
j .Lexit
.Lc12: _bbci.l a3, 3, .Linvalid_mask # bit 2 shouldn't be zero!
/* 12-register frame (call12) */
l32e a2, a5, -12
s32e a8, a2, -48
mov a8, a2
.Lc12c: s32e a9, a8, -44
s32e a10, a8, -40
s32e a11, a8, -36
s32e a12, a8, -32
s32e a13, a8, -28
s32e a14, a8, -24
s32e a15, a8, -20
srli a15, a3, 3
/* The stack pointer for a4..a7 is out of reach, so we rotate the
* window, grab the stackpointer, and rotate back.
* Alternatively, we could also use the following approach, but that
* makes the fixup routine much more complicated:
* rotw 1
* s32e a0, a13, -16
* ...
* rotw 2
*/
rotw 1
mov a5, a13
rotw -1
s32e a4, a9, -16
s32e a5, a9, -12
s32e a6, a9, -8
s32e a7, a9, -4
rotw 3
_beqi a3, 1, .Lexit
j .Lloop
.Linvalid_mask:
/* We get here because of an unrecoverable error in the window
* registers. If we are in user space, we kill the application,
* however, this condition is unrecoverable in kernel space.
*/
rsr a0, PS
_bbci.l a0, PS_UM_BIT, 1f
/* User space: Setup a dummy frame and kill application.
* Note: We assume EXC_TABLE_KSTK contains a valid stack pointer.
*/
movi a0, 1
movi a1, 0
wsr a0, WINDOWSTART
wsr a1, WINDOWBASE
rsync
movi a0, 0
movi a3, exc_table
l32i a1, a3, EXC_TABLE_KSTK
wsr a3, EXCSAVE_1
movi a4, (1 << PS_WOE_BIT) | 1
wsr a4, PS
rsync
movi a6, SIGSEGV
movi a4, do_exit
callx4 a4
1: /* Kernel space: PANIC! */
wsr a0, EXCSAVE_1
movi a0, unrecoverable_exception
callx0 a0 # should not return
1: j 1b
/*
* We should never get here. Bail out!
*/
ENTRY(fast_second_level_miss_double_kernel)
1: movi a0, unrecoverable_exception
callx0 a0 # should not return
1: j 1b
/* First-level entry handler for user, kernel, and double 2nd-level
* TLB miss exceptions. Note that for now, user and kernel miss
* exceptions share the same entry point and are handled identically.
*
* An old, less-efficient C version of this function used to exist.
* We include it below, interleaved as comments, for reference.
*
* Entry condition:
*
* a0: trashed, original value saved on stack (PT_AREG0)
* a1: a1
* a2: new stack pointer, original in DEPC
* a3: dispatch table
* depc: a2, original value saved on stack (PT_DEPC)
* excsave_1: a3
*
* PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
* < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
*/
ENTRY(fast_second_level_miss)
/* Save a1. Note: we don't expect a double exception. */
s32i a1, a2, PT_AREG1
/* We need to map the page of PTEs for the user task. Find
* the pointer to that page. Also, it's possible for tsk->mm
* to be NULL while tsk->active_mm is nonzero if we faulted on
* a vmalloc address. In that rare case, we must use
* active_mm instead to avoid a fault in this handler. See
*
* http://mail.nl.linux.org/linux-mm/2002-08/msg00258.html
* (or search Internet on "mm vs. active_mm")
*
* if (!mm)
* mm = tsk->active_mm;
* pgd = pgd_offset (mm, regs->excvaddr);
* pmd = pmd_offset (pgd, regs->excvaddr);
* pmdval = *pmd;
*/
GET_CURRENT(a1,a2)
l32i a0, a1, TASK_MM # tsk->mm
beqz a0, 9f
/* We deliberately destroy a3 that holds the exception table. */
8: rsr a3, EXCVADDR # fault address
_PGD_OFFSET(a0, a3, a1)
l32i a0, a0, 0 # read pmdval
beqz a0, 2f
/* Read ptevaddr and convert to top of page-table page.
*
* vpnval = read_ptevaddr_register() & PAGE_MASK;
* vpnval += DTLB_WAY_PGTABLE;
* pteval = mk_pte (virt_to_page(pmd_val(pmdval)), PAGE_KERNEL);
* write_dtlb_entry (pteval, vpnval);
*
* The messy computation for 'pteval' above really simplifies
* into the following:
*
* pteval = ((pmdval - PAGE_OFFSET) & PAGE_MASK) | PAGE_DIRECTORY
*/
movi a1, -PAGE_OFFSET
add a0, a0, a1 # pmdval - PAGE_OFFSET
extui a1, a0, 0, PAGE_SHIFT # ... & PAGE_MASK
xor a0, a0, a1
movi a1, _PAGE_DIRECTORY
or a0, a0, a1 # ... | PAGE_DIRECTORY
/*
* We utilize all three wired-ways (7-9) to hold pmd translations.
* Memory regions are mapped to the DTLBs according to bits 28 and 29.
* This allows to map the three most common regions to three different
* DTLBs:
* 0,1 -> way 7 program (0040.0000) and virtual (c000.0000)
* 2 -> way 8 shared libaries (2000.0000)
* 3 -> way 0 stack (3000.0000)
*/
extui a3, a3, 28, 2 # addr. bit 28 and 29 0,1,2,3
rsr a1, PTEVADDR
addx2 a3, a3, a3 # -> 0,3,6,9
srli a1, a1, PAGE_SHIFT
extui a3, a3, 2, 2 # -> 0,0,1,2
slli a1, a1, PAGE_SHIFT # ptevaddr & PAGE_MASK
addi a3, a3, DTLB_WAY_PGD
add a1, a1, a3 # ... + way_number
3: wdtlb a0, a1
dsync
/* Exit critical section. */
4: movi a3, exc_table # restore a3
movi a0, 0
s32i a0, a3, EXC_TABLE_FIXUP
/* Restore the working registers, and return. */
l32i a0, a2, PT_AREG0
l32i a1, a2, PT_AREG1
l32i a2, a2, PT_DEPC
xsr a3, EXCSAVE_1
bgeui a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
/* Restore excsave1 and return. */
rsr a2, DEPC
rfe
/* Return from double exception. */
1: xsr a2, DEPC
esync
rfde
9: l32i a0, a1, TASK_ACTIVE_MM # unlikely case mm == 0
j 8b
#if (DCACHE_WAY_SIZE > PAGE_SIZE)
2: /* Special case for cache aliasing.
* We (should) only get here if a clear_user_page, copy_user_page
* or the aliased cache flush functions got preemptively interrupted
* by another task. Re-establish temporary mapping to the
* TLBTEMP_BASE areas.
*/
/* We shouldn't be in a double exception */
l32i a0, a2, PT_DEPC
bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 2f
/* Make sure the exception originated in the special functions */
movi a0, __tlbtemp_mapping_start
rsr a3, EPC_1
bltu a3, a0, 2f
movi a0, __tlbtemp_mapping_end
bgeu a3, a0, 2f
/* Check if excvaddr was in one of the TLBTEMP_BASE areas. */
movi a3, TLBTEMP_BASE_1
rsr a0, EXCVADDR
bltu a0, a3, 2f
addi a1, a0, -(2 << (DCACHE_ALIAS_ORDER + PAGE_SHIFT))
bgeu a1, a3, 2f
/* Check if we have to restore an ITLB mapping. */
movi a1, __tlbtemp_mapping_itlb
rsr a3, EPC_1
sub a3, a3, a1
/* Calculate VPN */
movi a1, PAGE_MASK
and a1, a1, a0
/* Jump for ITLB entry */
bgez a3, 1f
/* We can use up to two TLBTEMP areas, one for src and one for dst. */
extui a3, a0, PAGE_SHIFT + DCACHE_ALIAS_ORDER, 1
add a1, a3, a1
/* PPN is in a6 for the first TLBTEMP area and in a7 for the second. */
mov a0, a6
movnez a0, a7, a3
j 3b
/* ITLB entry. We only use dst in a6. */
1: witlb a6, a1
isync
j 4b
#endif // DCACHE_WAY_SIZE > PAGE_SIZE
2: /* Invalid PGD, default exception handling */
movi a3, exc_table
rsr a1, DEPC
xsr a3, EXCSAVE_1
s32i a1, a2, PT_AREG2
s32i a3, a2, PT_AREG3
mov a1, a2
rsr a2, PS
bbsi.l a2, PS_UM_BIT, 1f
j _kernel_exception
1: j _user_exception
/*
* StoreProhibitedException
*
* Update the pte and invalidate the itlb mapping for this pte.
*
* Entry condition:
*
* a0: trashed, original value saved on stack (PT_AREG0)
* a1: a1
* a2: new stack pointer, original in DEPC
* a3: dispatch table
* depc: a2, original value saved on stack (PT_DEPC)
* excsave_1: a3
*
* PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
* < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
*/
ENTRY(fast_store_prohibited)
/* Save a1 and a4. */
s32i a1, a2, PT_AREG1
s32i a4, a2, PT_AREG4
GET_CURRENT(a1,a2)
l32i a0, a1, TASK_MM # tsk->mm
beqz a0, 9f
8: rsr a1, EXCVADDR # fault address
_PGD_OFFSET(a0, a1, a4)
l32i a0, a0, 0
beqz a0, 2f
/* Note that we assume _PAGE_WRITABLE_BIT is only set if pte is valid.*/
_PTE_OFFSET(a0, a1, a4)
l32i a4, a0, 0 # read pteval
bbci.l a4, _PAGE_WRITABLE_BIT, 2f
movi a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE
or a4, a4, a1
rsr a1, EXCVADDR
s32i a4, a0, 0
/* We need to flush the cache if we have page coloring. */
#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
dhwb a0, 0
#endif
pdtlb a0, a1
wdtlb a4, a0
/* Exit critical section. */
movi a0, 0
s32i a0, a3, EXC_TABLE_FIXUP
/* Restore the working registers, and return. */
l32i a4, a2, PT_AREG4
l32i a1, a2, PT_AREG1
l32i a0, a2, PT_AREG0
l32i a2, a2, PT_DEPC
/* Restore excsave1 and a3. */
xsr a3, EXCSAVE_1
bgeui a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
rsr a2, DEPC
rfe
/* Double exception. Restore FIXUP handler and return. */
1: xsr a2, DEPC
esync
rfde
9: l32i a0, a1, TASK_ACTIVE_MM # unlikely case mm == 0
j 8b
2: /* If there was a problem, handle fault in C */
rsr a4, DEPC # still holds a2
xsr a3, EXCSAVE_1
s32i a4, a2, PT_AREG2
s32i a3, a2, PT_AREG3
l32i a4, a2, PT_AREG4
mov a1, a2
rsr a2, PS
bbsi.l a2, PS_UM_BIT, 1f
j _kernel_exception
1: j _user_exception
#if XCHAL_EXTRA_SA_SIZE
#warning fast_coprocessor untested
/*
* Entry condition:
*
* a0: trashed, original value saved on stack (PT_AREG0)
* a1: a1
* a2: new stack pointer, original in DEPC
* a3: dispatch table
* depc: a2, original value saved on stack (PT_DEPC)
* excsave_1: a3
*
* PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
* < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
*/
ENTRY(fast_coprocessor_double)
wsr a0, EXCSAVE_1
movi a0, unrecoverable_exception
callx0 a0
ENTRY(fast_coprocessor)
/* Fatal if we are in a double exception. */
l32i a0, a2, PT_DEPC
_bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_coprocessor_double
/* Save some registers a1, a3, a4, SAR */
xsr a3, EXCSAVE_1
s32i a3, a2, PT_AREG3
rsr a3, SAR
s32i a4, a2, PT_AREG4
s32i a1, a2, PT_AREG1
s32i a5, a1, PT_AREG5
s32i a3, a2, PT_SAR
mov a1, a2
/* Currently, the HAL macros only guarantee saving a0 and a1.
* These can and will be refined in the future, but for now,
* just save the remaining registers of a2...a15.
*/
s32i a6, a1, PT_AREG6
s32i a7, a1, PT_AREG7
s32i a8, a1, PT_AREG8
s32i a9, a1, PT_AREG9
s32i a10, a1, PT_AREG10
s32i a11, a1, PT_AREG11
s32i a12, a1, PT_AREG12
s32i a13, a1, PT_AREG13
s32i a14, a1, PT_AREG14
s32i a15, a1, PT_AREG15
/* Find coprocessor number. Subtract first CP EXCCAUSE from EXCCAUSE */
rsr a0, EXCCAUSE
addi a3, a0, -XCHAL_EXCCAUSE_COPROCESSOR0_DISABLED
/* Set corresponding CPENABLE bit */
movi a4, 1
ssl a3 # SAR: 32 - coprocessor_number
rsr a5, CPENABLE
sll a4, a4
or a4, a5, a4
wsr a4, CPENABLE
rsync
movi a5, coprocessor_info # list of owner and offset into cp_save
addx8 a0, a4, a5 # entry for CP
bne a4, a5, .Lload # bit wasn't set before, cp not in use
/* Now compare the current task with the owner of the coprocessor.
* If they are the same, there is no reason to save or restore any
* coprocessor state. Having already enabled the coprocessor,
* branch ahead to return.
*/
GET_CURRENT(a5,a1)
l32i a4, a0, COPROCESSOR_INFO_OWNER # a4: current owner for this CP
beq a4, a5, .Ldone
/* Find location to dump current coprocessor state:
* task_struct->task_cp_save_offset + coprocessor_offset[coprocessor]
*
* Note: a0 pointer to the entry in the coprocessor owner table,
* a3 coprocessor number,
* a4 current owner of coprocessor.
*/
l32i a5, a0, COPROCESSOR_INFO_OFFSET
addi a2, a4, THREAD_CP_SAVE
add a2, a2, a5
/* Store current coprocessor states. (a5 still has CP number) */
xchal_cpi_store_funcbody
/* The macro might have destroyed a3 (coprocessor number), but
* SAR still has 32 - coprocessor_number!
*/
movi a3, 32
rsr a4, SAR
sub a3, a3, a4
.Lload: /* A new task now owns the corpocessors. Save its TCB pointer into
* the coprocessor owner table.
*
* Note: a0 pointer to the entry in the coprocessor owner table,
* a3 coprocessor number.
*/
GET_CURRENT(a4,a1)
s32i a4, a0, 0
/* Find location from where to restore the current coprocessor state.*/
l32i a5, a0, COPROCESSOR_INFO_OFFSET
addi a2, a4, THREAD_CP_SAVE
add a2, a2, a4
xchal_cpi_load_funcbody
/* We must assume that the xchal_cpi_store_funcbody macro destroyed
* registers a2..a15.
*/
.Ldone: l32i a15, a1, PT_AREG15
l32i a14, a1, PT_AREG14
l32i a13, a1, PT_AREG13
l32i a12, a1, PT_AREG12
l32i a11, a1, PT_AREG11
l32i a10, a1, PT_AREG10
l32i a9, a1, PT_AREG9
l32i a8, a1, PT_AREG8
l32i a7, a1, PT_AREG7
l32i a6, a1, PT_AREG6
l32i a5, a1, PT_AREG5
l32i a4, a1, PT_AREG4
l32i a3, a1, PT_AREG3
l32i a2, a1, PT_AREG2
l32i a0, a1, PT_AREG0
l32i a1, a1, PT_AREG1
rfe
#endif /* XCHAL_EXTRA_SA_SIZE */
/*
* System Calls.
*
* void system_call (struct pt_regs* regs, int exccause)
* a2 a3
*/
ENTRY(system_call)
entry a1, 32
/* regs->syscall = regs->areg[2] */
l32i a3, a2, PT_AREG2
mov a6, a2
movi a4, do_syscall_trace_enter
s32i a3, a2, PT_SYSCALL
callx4 a4
/* syscall = sys_call_table[syscall_nr] */
movi a4, sys_call_table;
movi a5, __NR_syscall_count
movi a6, -ENOSYS
bgeu a3, a5, 1f
addx4 a4, a3, a4
l32i a4, a4, 0
movi a5, sys_ni_syscall;
beq a4, a5, 1f
/* Load args: arg0 - arg5 are passed via regs. */
l32i a6, a2, PT_AREG6
l32i a7, a2, PT_AREG3
l32i a8, a2, PT_AREG4
l32i a9, a2, PT_AREG5
l32i a10, a2, PT_AREG8
l32i a11, a2, PT_AREG9
/* Pass one additional argument to the syscall: pt_regs (on stack) */
s32i a2, a1, 0
callx4 a4
1: /* regs->areg[2] = return_value */
s32i a6, a2, PT_AREG2
movi a4, do_syscall_trace_leave
mov a6, a2
callx4 a4
retw
/*
* Create a kernel thread
*
* int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
* a2 a2 a3 a4
*/
ENTRY(kernel_thread)
entry a1, 16
mov a5, a2 # preserve fn over syscall
mov a7, a3 # preserve args over syscall
movi a3, _CLONE_VM | _CLONE_UNTRACED
movi a2, __NR_clone
or a6, a4, a3 # arg0: flags
mov a3, a1 # arg1: sp
syscall
beq a3, a1, 1f # branch if parent
mov a6, a7 # args
callx4 a5 # fn(args)
movi a2, __NR_exit
syscall # return value of fn(args) still in a6
1: retw
/*
* Do a system call from kernel instead of calling sys_execve, so we end up
* with proper pt_regs.
*
* int kernel_execve(const char *fname, char *const argv[], charg *const envp[])
* a2 a2 a3 a4
*/
ENTRY(kernel_execve)
entry a1, 16
mov a6, a2 # arg0 is in a6
movi a2, __NR_execve
syscall
retw
/*
* Task switch.
*
* struct task* _switch_to (struct task* prev, struct task* next)
* a2 a2 a3
*/
ENTRY(_switch_to)
entry a1, 16
mov a4, a3 # preserve a3
s32i a0, a2, THREAD_RA # save return address
s32i a1, a2, THREAD_SP # save stack pointer
/* Disable ints while we manipulate the stack pointer; spill regs. */
movi a5, (1 << PS_EXCM_BIT) | LOCKLEVEL
xsr a5, PS
rsr a3, EXCSAVE_1
rsync
s32i a3, a3, EXC_TABLE_FIXUP /* enter critical section */
call0 _spill_registers
/* Set kernel stack (and leave critical section)
* Note: It's save to set it here. The stack will not be overwritten
* because the kernel stack will only be loaded again after
* we return from kernel space.
*/
l32i a0, a4, TASK_THREAD_INFO
rsr a3, EXCSAVE_1 # exc_table
movi a1, 0
addi a0, a0, PT_REGS_OFFSET
s32i a1, a3, EXC_TABLE_FIXUP
s32i a0, a3, EXC_TABLE_KSTK
/* restore context of the task that 'next' addresses */
l32i a0, a4, THREAD_RA /* restore return address */
l32i a1, a4, THREAD_SP /* restore stack pointer */
wsr a5, PS
rsync
retw
ENTRY(ret_from_fork)
/* void schedule_tail (struct task_struct *prev)
* Note: prev is still in a6 (return value from fake call4 frame)
*/
movi a4, schedule_tail
callx4 a4
movi a4, do_syscall_trace_leave
mov a6, a1
callx4 a4
j common_exception_return