linux/arch/arm/mach-at91/board-csb337.c

268 lines
6.1 KiB
C
Raw Normal View History

/*
* linux/arch/arm/mach-at91/board-csb337.c
*
* Copyright (C) 2005 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include "generic.h"
static void __init csb337_map_io(void)
{
/* Initialize processor: 3.6864 MHz crystal */
at91rm9200_initialize(3686400, AT91RM9200_BGA);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
/* DBGU on ttyS0 */
at91_register_uart(0, 0, 0);
/* make console=ttyS0 the default */
at91_set_serial_console(0);
}
static void __init csb337_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata csb337_eth_data = {
.phy_irq_pin = AT91_PIN_PC2,
.is_rmii = 0,
};
static struct at91_usbh_data __initdata csb337_usbh_data = {
.ports = 2,
};
static struct at91_udc_data __initdata csb337_udc_data = {
// this has no VBUS sensing pin
.pullup_pin = AT91_PIN_PA24,
};
static struct i2c_board_info __initdata csb337_i2c_devices[] = {
{
I2C_BOARD_INFO("ds1307", 0x68),
},
};
static struct at91_cf_data __initdata csb337_cf_data = {
/*
* connector P4 on the CSB 337 mates to
* connector P8 on the CSB 300CF
*/
/* CSB337 specific */
.det_pin = AT91_PIN_PC3,
/* CSB300CF specific */
.irq_pin = AT91_PIN_PA19,
.vcc_pin = AT91_PIN_PD0,
.rst_pin = AT91_PIN_PD2,
};
static struct at91_mmc_data __initdata csb337_mmc_data = {
.det_pin = AT91_PIN_PD5,
.slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PD6,
};
static struct spi_board_info csb337_spi_devices[] = {
{ /* CAN controller */
.modalias = "sak82c900",
.chip_select = 0,
.max_speed_hz = 6 * 1000 * 1000,
},
};
#define CSB_FLASH_BASE AT91_CHIPSELECT_0
#define CSB_FLASH_SIZE SZ_8M
static struct mtd_partition csb_flash_partitions[] = {
{
.name = "uMON flash",
.offset = 0,
.size = MTDPART_SIZ_FULL,
.mask_flags = MTD_WRITEABLE, /* read only */
}
};
static struct physmap_flash_data csb_flash_data = {
.width = 2,
.parts = csb_flash_partitions,
.nr_parts = ARRAY_SIZE(csb_flash_partitions),
};
static struct resource csb_flash_resources[] = {
{
.start = CSB_FLASH_BASE,
.end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device csb_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &csb_flash_data,
},
.resource = csb_flash_resources,
.num_resources = ARRAY_SIZE(csb_flash_resources),
};
/*
* GPIO Buttons (on CSB300)
*/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button csb300_buttons[] = {
{
.gpio = AT91_PIN_PB29,
.code = BTN_0,
.desc = "sw0",
.active_low = 1,
.wakeup = 1,
},
{
.gpio = AT91_PIN_PB28,
.code = BTN_1,
.desc = "sw1",
.active_low = 1,
.wakeup = 1,
},
{
.gpio = AT91_PIN_PA21,
.code = BTN_2,
.desc = "sw2",
.active_low = 1,
.wakeup = 1,
}
};
static struct gpio_keys_platform_data csb300_button_data = {
.buttons = csb300_buttons,
.nbuttons = ARRAY_SIZE(csb300_buttons),
};
static struct platform_device csb300_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &csb300_button_data,
}
};
static void __init csb300_add_device_buttons(void)
{
at91_set_gpio_input(AT91_PIN_PB29, 1); /* sw0 */
at91_set_deglitch(AT91_PIN_PB29, 1);
at91_set_gpio_input(AT91_PIN_PB28, 1); /* sw1 */
at91_set_deglitch(AT91_PIN_PB28, 1);
at91_set_gpio_input(AT91_PIN_PA21, 1); /* sw2 */
at91_set_deglitch(AT91_PIN_PA21, 1);
platform_device_register(&csb300_button_device);
}
#else
static void __init csb300_add_device_buttons(void) {}
#endif
static struct gpio_led csb_leds[] = {
{ /* "led0", yellow */
.name = "led0",
.gpio = AT91_PIN_PB2,
.active_low = 1,
.default_trigger = "heartbeat",
},
{ /* "led1", green */
.name = "led1",
.gpio = AT91_PIN_PB1,
.active_low = 1,
.default_trigger = "mmc0",
},
{ /* "led2", yellow */
.name = "led2",
.gpio = AT91_PIN_PB0,
.active_low = 1,
.default_trigger = "ide-disk",
}
};
static void __init csb337_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&csb337_eth_data);
/* USB Host */
at91_add_device_usbh(&csb337_usbh_data);
/* USB Device */
at91_add_device_udc(&csb337_udc_data);
/* I2C */
at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices));
/* Compact Flash */
at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */
at91_add_device_cf(&csb337_cf_data);
/* SPI */
at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
/* MMC */
at91_add_device_mmc(0, &csb337_mmc_data);
/* NOR flash */
platform_device_register(&csb_flash);
/* LEDs */
at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
/* Switches on CSB300 */
csb300_add_device_buttons();
}
MACHINE_START(CSB337, "Cogent CSB337")
/* Maintainer: Bill Gatliff */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = csb337_map_io,
.init_irq = csb337_init_irq,
.init_machine = csb337_board_init,
MACHINE_END