linux/arch/powerpc/oprofile/op_model_pa6t.c

241 lines
5.8 KiB
C
Raw Normal View History

/*
* Copyright (C) 2006-2007 PA Semi, Inc
*
* Author: Shashi Rao, PA Semi
*
* Maintained by: Olof Johansson <olof@lixom.net>
*
* Based on arch/powerpc/oprofile/op_model_power4.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/oprofile.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/percpu.h>
#include <asm/processor.h>
#include <asm/cputable.h>
#include <asm/oprofile_impl.h>
#include <asm/reg.h>
static unsigned char oprofile_running;
/* mmcr values are set in pa6t_reg_setup, used in pa6t_cpu_setup */
static u64 mmcr0_val;
static u64 mmcr1_val;
/* inited in pa6t_reg_setup */
static u64 reset_value[OP_MAX_COUNTER];
static inline u64 ctr_read(unsigned int i)
{
switch (i) {
case 0:
return mfspr(SPRN_PA6T_PMC0);
case 1:
return mfspr(SPRN_PA6T_PMC1);
case 2:
return mfspr(SPRN_PA6T_PMC2);
case 3:
return mfspr(SPRN_PA6T_PMC3);
case 4:
return mfspr(SPRN_PA6T_PMC4);
case 5:
return mfspr(SPRN_PA6T_PMC5);
default:
printk(KERN_ERR "ctr_read called with bad arg %u\n", i);
return 0;
}
}
static inline void ctr_write(unsigned int i, u64 val)
{
switch (i) {
case 0:
mtspr(SPRN_PA6T_PMC0, val);
break;
case 1:
mtspr(SPRN_PA6T_PMC1, val);
break;
case 2:
mtspr(SPRN_PA6T_PMC2, val);
break;
case 3:
mtspr(SPRN_PA6T_PMC3, val);
break;
case 4:
mtspr(SPRN_PA6T_PMC4, val);
break;
case 5:
mtspr(SPRN_PA6T_PMC5, val);
break;
default:
printk(KERN_ERR "ctr_write called with bad arg %u\n", i);
break;
}
}
/* precompute the values to stuff in the hardware registers */
static int pa6t_reg_setup(struct op_counter_config *ctr,
struct op_system_config *sys,
int num_ctrs)
{
int pmc;
/*
* adjust the mmcr0.en[0-5] and mmcr0.inten[0-5] values obtained from the
* event_mappings file by turning off the counters that the user doesn't
* care about
*
* setup user and kernel profiling
*/
for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++)
if (!ctr[pmc].enabled) {
sys->mmcr0 &= ~(0x1UL << pmc);
sys->mmcr0 &= ~(0x1UL << (pmc+12));
pr_debug("turned off counter %u\n", pmc);
}
if (sys->enable_kernel)
sys->mmcr0 |= PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN;
else
sys->mmcr0 &= ~(PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN);
if (sys->enable_user)
sys->mmcr0 |= PA6T_MMCR0_PREN;
else
sys->mmcr0 &= ~PA6T_MMCR0_PREN;
/*
* The performance counter event settings are given in the mmcr0 and
* mmcr1 values passed from the user in the op_system_config
* structure (sys variable).
*/
mmcr0_val = sys->mmcr0;
mmcr1_val = sys->mmcr1;
pr_debug("mmcr0_val inited to %016lx\n", sys->mmcr0);
pr_debug("mmcr1_val inited to %016lx\n", sys->mmcr1);
for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) {
/* counters are 40 bit. Move to cputable at some point? */
reset_value[pmc] = (0x1UL << 39) - ctr[pmc].count;
pr_debug("reset_value for pmc%u inited to 0x%llx\n",
pmc, reset_value[pmc]);
}
return 0;
}
/* configure registers on this cpu */
static int pa6t_cpu_setup(struct op_counter_config *ctr)
{
u64 mmcr0 = mmcr0_val;
u64 mmcr1 = mmcr1_val;
/* Default is all PMCs off */
mmcr0 &= ~(0x3FUL);
mtspr(SPRN_PA6T_MMCR0, mmcr0);
/* program selected programmable events in */
mtspr(SPRN_PA6T_MMCR1, mmcr1);
pr_debug("setup on cpu %d, mmcr0 %016lx\n", smp_processor_id(),
mfspr(SPRN_PA6T_MMCR0));
pr_debug("setup on cpu %d, mmcr1 %016lx\n", smp_processor_id(),
mfspr(SPRN_PA6T_MMCR1));
return 0;
}
static int pa6t_start(struct op_counter_config *ctr)
{
int i;
/* Hold off event counting until rfid */
u64 mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS;
for (i = 0; i < cur_cpu_spec->num_pmcs; i++)
if (ctr[i].enabled)
ctr_write(i, reset_value[i]);
else
ctr_write(i, 0UL);
mtspr(SPRN_PA6T_MMCR0, mmcr0);
oprofile_running = 1;
pr_debug("start on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0);
return 0;
}
static void pa6t_stop(void)
{
u64 mmcr0;
/* freeze counters */
mmcr0 = mfspr(SPRN_PA6T_MMCR0);
mmcr0 |= PA6T_MMCR0_FCM0;
mtspr(SPRN_PA6T_MMCR0, mmcr0);
oprofile_running = 0;
pr_debug("stop on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0);
}
/* handle the perfmon overflow vector */
static void pa6t_handle_interrupt(struct pt_regs *regs,
struct op_counter_config *ctr)
{
unsigned long pc = mfspr(SPRN_PA6T_SIAR);
int is_kernel = is_kernel_addr(pc);
u64 val;
int i;
u64 mmcr0;
/* disable perfmon counting until rfid */
mmcr0 = mfspr(SPRN_PA6T_MMCR0);
mtspr(SPRN_PA6T_MMCR0, mmcr0 | PA6T_MMCR0_HANDDIS);
/* Record samples. We've got one global bit for whether a sample
* was taken, so add it for any counter that triggered overflow.
*/
for (i = 0; i < cur_cpu_spec->num_pmcs; i++) {
val = ctr_read(i);
if (val & (0x1UL << 39)) { /* Overflow bit set */
if (oprofile_running && ctr[i].enabled) {
if (mmcr0 & PA6T_MMCR0_SIARLOG)
oprofile_add_ext_sample(pc, regs, i, is_kernel);
ctr_write(i, reset_value[i]);
} else {
ctr_write(i, 0UL);
}
}
}
/* Restore mmcr0 to a good known value since the PMI changes it */
mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS;
mtspr(SPRN_PA6T_MMCR0, mmcr0);
}
struct op_powerpc_model op_model_pa6t = {
.reg_setup = pa6t_reg_setup,
.cpu_setup = pa6t_cpu_setup,
.start = pa6t_start,
.stop = pa6t_stop,
.handle_interrupt = pa6t_handle_interrupt,
};