linux/drivers/media/video/saa7134/saa7134-i2c.c

496 lines
12 KiB
C
Raw Normal View History

/*
*
* device driver for philips saa7134 based TV cards
* i2c interface support
*
* (c) 2001,02 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include "saa7134-reg.h"
#include "saa7134.h"
#include <media/v4l2-common.h>
/* ----------------------------------------------------------- */
static unsigned int i2c_debug = 0;
module_param(i2c_debug, int, 0644);
MODULE_PARM_DESC(i2c_debug,"enable debug messages [i2c]");
static unsigned int i2c_scan = 0;
module_param(i2c_scan, int, 0444);
MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
#define d1printk if (1 == i2c_debug) printk
#define d2printk if (2 == i2c_debug) printk
#define I2C_WAIT_DELAY 32
#define I2C_WAIT_RETRY 16
/* ----------------------------------------------------------- */
static char *str_i2c_status[] = {
"IDLE", "DONE_STOP", "BUSY", "TO_SCL", "TO_ARB", "DONE_WRITE",
"DONE_READ", "DONE_WRITE_TO", "DONE_READ_TO", "NO_DEVICE",
"NO_ACKN", "BUS_ERR", "ARB_LOST", "SEQ_ERR", "ST_ERR", "SW_ERR"
};
enum i2c_status {
IDLE = 0, // no I2C command pending
DONE_STOP = 1, // I2C command done and STOP executed
BUSY = 2, // executing I2C command
TO_SCL = 3, // executing I2C command, time out on clock stretching
TO_ARB = 4, // time out on arbitration trial, still trying
DONE_WRITE = 5, // I2C command done and awaiting next write command
DONE_READ = 6, // I2C command done and awaiting next read command
DONE_WRITE_TO = 7, // see 5, and time out on status echo
DONE_READ_TO = 8, // see 6, and time out on status echo
NO_DEVICE = 9, // no acknowledge on device slave address
NO_ACKN = 10, // no acknowledge after data byte transfer
BUS_ERR = 11, // bus error
ARB_LOST = 12, // arbitration lost during transfer
SEQ_ERR = 13, // erroneous programming sequence
ST_ERR = 14, // wrong status echoing
SW_ERR = 15 // software error
};
static char *str_i2c_attr[] = {
"NOP", "STOP", "CONTINUE", "START"
};
enum i2c_attr {
NOP = 0, // no operation on I2C bus
STOP = 1, // stop condition, no associated byte transfer
CONTINUE = 2, // continue with byte transfer
START = 3 // start condition with byte transfer
};
static inline enum i2c_status i2c_get_status(struct saa7134_dev *dev)
{
enum i2c_status status;
status = saa_readb(SAA7134_I2C_ATTR_STATUS) & 0x0f;
d2printk(KERN_DEBUG "%s: i2c stat <= %s\n",dev->name,
str_i2c_status[status]);
return status;
}
static inline void i2c_set_status(struct saa7134_dev *dev,
enum i2c_status status)
{
d2printk(KERN_DEBUG "%s: i2c stat => %s\n",dev->name,
str_i2c_status[status]);
saa_andorb(SAA7134_I2C_ATTR_STATUS,0x0f,status);
}
static inline void i2c_set_attr(struct saa7134_dev *dev, enum i2c_attr attr)
{
d2printk(KERN_DEBUG "%s: i2c attr => %s\n",dev->name,
str_i2c_attr[attr]);
saa_andorb(SAA7134_I2C_ATTR_STATUS,0xc0,attr << 6);
}
static inline int i2c_is_error(enum i2c_status status)
{
switch (status) {
case NO_DEVICE:
case NO_ACKN:
case BUS_ERR:
case ARB_LOST:
case SEQ_ERR:
case ST_ERR:
return true;
default:
return false;
}
}
static inline int i2c_is_idle(enum i2c_status status)
{
switch (status) {
case IDLE:
case DONE_STOP:
return true;
default:
return false;
}
}
static inline int i2c_is_busy(enum i2c_status status)
{
switch (status) {
case BUSY:
return true;
default:
return false;
}
}
static int i2c_is_busy_wait(struct saa7134_dev *dev)
{
enum i2c_status status;
int count;
for (count = 0; count < I2C_WAIT_RETRY; count++) {
status = i2c_get_status(dev);
if (!i2c_is_busy(status))
break;
saa_wait(I2C_WAIT_DELAY);
}
if (I2C_WAIT_RETRY == count)
return false;
return true;
}
static int i2c_reset(struct saa7134_dev *dev)
{
enum i2c_status status;
int count;
d2printk(KERN_DEBUG "%s: i2c reset\n",dev->name);
status = i2c_get_status(dev);
if (!i2c_is_error(status))
return true;
i2c_set_status(dev,status);
for (count = 0; count < I2C_WAIT_RETRY; count++) {
status = i2c_get_status(dev);
if (!i2c_is_error(status))
break;
udelay(I2C_WAIT_DELAY);
}
if (I2C_WAIT_RETRY == count)
return false;
if (!i2c_is_idle(status))
return false;
i2c_set_attr(dev,NOP);
return true;
}
static inline int i2c_send_byte(struct saa7134_dev *dev,
enum i2c_attr attr,
unsigned char data)
{
enum i2c_status status;
__u32 dword;
/* have to write both attr + data in one 32bit word */
dword = saa_readl(SAA7134_I2C_ATTR_STATUS >> 2);
dword &= 0x0f;
dword |= (attr << 6);
dword |= ((__u32)data << 8);
dword |= 0x00 << 16; /* 100 kHz */
// dword |= 0x40 << 16; /* 400 kHz */
dword |= 0xf0 << 24;
saa_writel(SAA7134_I2C_ATTR_STATUS >> 2, dword);
d2printk(KERN_DEBUG "%s: i2c data => 0x%x\n",dev->name,data);
if (!i2c_is_busy_wait(dev))
return -EIO;
status = i2c_get_status(dev);
if (i2c_is_error(status))
return -EIO;
return 0;
}
static inline int i2c_recv_byte(struct saa7134_dev *dev)
{
enum i2c_status status;
unsigned char data;
i2c_set_attr(dev,CONTINUE);
if (!i2c_is_busy_wait(dev))
return -EIO;
status = i2c_get_status(dev);
if (i2c_is_error(status))
return -EIO;
data = saa_readb(SAA7134_I2C_DATA);
d2printk(KERN_DEBUG "%s: i2c data <= 0x%x\n",dev->name,data);
return data;
}
static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
struct i2c_msg *msgs, int num)
{
struct saa7134_dev *dev = i2c_adap->algo_data;
enum i2c_status status;
unsigned char data;
int addr,rc,i,byte;
status = i2c_get_status(dev);
if (!i2c_is_idle(status))
if (!i2c_reset(dev))
return -EIO;
d2printk("start xfer\n");
d1printk(KERN_DEBUG "%s: i2c xfer:",dev->name);
for (i = 0; i < num; i++) {
if (!(msgs[i].flags & I2C_M_NOSTART) || 0 == i) {
/* send address */
d2printk("send address\n");
addr = msgs[i].addr << 1;
if (msgs[i].flags & I2C_M_RD)
addr |= 1;
if (i > 0 && msgs[i].flags & I2C_M_RD) {
/* workaround for a saa7134 i2c bug
* needed to talk to the mt352 demux
* thanks to pinnacle for the hint */
int quirk = 0xfd;
d1printk(" [%02x quirk]",quirk);
i2c_send_byte(dev,START,quirk);
i2c_recv_byte(dev);
}
d1printk(" < %02x", addr);
rc = i2c_send_byte(dev,START,addr);
if (rc < 0)
goto err;
}
if (msgs[i].flags & I2C_M_RD) {
/* read bytes */
d2printk("read bytes\n");
for (byte = 0; byte < msgs[i].len; byte++) {
d1printk(" =");
rc = i2c_recv_byte(dev);
if (rc < 0)
goto err;
d1printk("%02x", rc);
msgs[i].buf[byte] = rc;
}
} else {
/* write bytes */
d2printk("write bytes\n");
for (byte = 0; byte < msgs[i].len; byte++) {
data = msgs[i].buf[byte];
d1printk(" %02x", data);
rc = i2c_send_byte(dev,CONTINUE,data);
if (rc < 0)
goto err;
}
}
}
d2printk("xfer done\n");
d1printk(" >");
i2c_set_attr(dev,STOP);
rc = -EIO;
if (!i2c_is_busy_wait(dev))
goto err;
status = i2c_get_status(dev);
if (i2c_is_error(status))
goto err;
[PATCH] V4L: Miscellaneous fixes - Fixed some bttv card numbers. - BTTV and SAA7134 version numbers incremented to reflect changes. - pci_dma_supported() is called after pci_set_dma_mask() which already did check that for us. This patch removes the unneeded call to pci_dma_supported() at bttv-driver.c - Ensure a sufficient I2C bus idle time between 2 messages for saa7134-i2c.c - It is important to write at first to MO_GP3_IO for cx88-tvaudio.c - Use try_to_freeze() instead of refrigerator at msp3400.c - Recognizing the MFPE05-2 Tuner at tveeprom.c - Add new parameter to help identify radio chipsets at tuner module: show_i2c=1 will show 16 reading bytes from detected tuners. - BTTV does generate some Unimplemented IOCTL log at tuner module: 0x40046d11(dir=1,tp=0x6d,nr=17,sz=4) means that it is sending MSP3400 calls to non-msp3400 tuners. Warning eliminated. VIDIOSAUDIO is also called, so debug messages updated. It is still requiring IOCTL implementation. - Added two more tuners. - Add support for the SVideo input on the GDI Black Gold. Signed-off-by: Peter Missel <peter.missel@onlinehome.de> Signed-off-by: Graham Bevan <graham.bevan@ntlworld.com> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 05:34:43 +00:00
/* ensure that the bus is idle for at least one bit slot */
msleep(1);
d1printk("\n");
return num;
err:
if (1 == i2c_debug) {
status = i2c_get_status(dev);
printk(" ERROR: %s\n",str_i2c_status[status]);
}
return rc;
}
/* ----------------------------------------------------------- */
static int algo_control(struct i2c_adapter *adapter,
unsigned int cmd, unsigned long arg)
{
return 0;
}
static u32 functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_SMBUS_EMUL;
}
static int attach_inform(struct i2c_client *client)
{
struct saa7134_dev *dev = client->adapter->algo_data;
int tuner = dev->tuner_type;
int conf = dev->tda9887_conf;
struct tuner_setup tun_setup;
d1printk( "%s i2c attach [addr=0x%x,client=%s]\n",
client->driver->driver.name, client->addr, client->name);
/* Am I an i2c remote control? */
switch (client->addr) {
case 0x7a:
case 0x47:
case 0x71:
{
struct IR_i2c *ir = i2c_get_clientdata(client);
d1printk("%s i2c IR detected (%s).\n",
client->driver->driver.name, ir->phys);
saa7134_set_i2c_ir(dev,ir);
break;
}
}
if (!client->driver->command)
return 0;
if (saa7134_boards[dev->board].radio_type != UNSET) {
tun_setup.type = saa7134_boards[dev->board].radio_type;
tun_setup.addr = saa7134_boards[dev->board].radio_addr;
if ((tun_setup.addr == ADDR_UNSET) || (tun_setup.addr == client->addr)) {
tun_setup.mode_mask = T_RADIO;
client->driver->command(client, TUNER_SET_TYPE_ADDR, &tun_setup);
}
}
if (tuner != UNSET) {
tun_setup.type = tuner;
tun_setup.addr = saa7134_boards[dev->board].tuner_addr;
tun_setup.config = saa7134_boards[dev->board].tuner_config;
tun_setup.tuner_callback = saa7134_tuner_callback;
if ((tun_setup.addr == ADDR_UNSET)||(tun_setup.addr == client->addr)) {
tun_setup.mode_mask = T_ANALOG_TV;
client->driver->command(client,TUNER_SET_TYPE_ADDR, &tun_setup);
}
}
client->driver->command(client, TDA9887_SET_CONFIG, &conf);
return 0;
}
static struct i2c_algorithm saa7134_algo = {
.master_xfer = saa7134_i2c_xfer,
.algo_control = algo_control,
.functionality = functionality,
};
static struct i2c_adapter saa7134_adap_template = {
.owner = THIS_MODULE,
.class = I2C_CLASS_TV_ANALOG,
.name = "saa7134",
.id = I2C_HW_SAA7134,
.algo = &saa7134_algo,
.client_register = attach_inform,
};
static struct i2c_client saa7134_client_template = {
.name = "saa7134 internal",
};
/* ----------------------------------------------------------- */
static int
saa7134_i2c_eeprom(struct saa7134_dev *dev, unsigned char *eedata, int len)
{
unsigned char buf;
int i,err;
dev->i2c_client.addr = 0xa0 >> 1;
buf = 0;
if (1 != (err = i2c_master_send(&dev->i2c_client,&buf,1))) {
printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
dev->name,err);
return -1;
}
if (len != (err = i2c_master_recv(&dev->i2c_client,eedata,len))) {
printk(KERN_WARNING "%s: i2c eeprom read error (err=%d)\n",
dev->name,err);
return -1;
}
for (i = 0; i < len; i++) {
if (0 == (i % 16))
printk(KERN_INFO "%s: i2c eeprom %02x:",dev->name,i);
printk(" %02x",eedata[i]);
if (15 == (i % 16))
printk("\n");
}
return 0;
}
static char *i2c_devs[128] = {
[ 0x20 ] = "mpeg encoder (saa6752hs)",
[ 0xa0 >> 1 ] = "eeprom",
[ 0xc0 >> 1 ] = "tuner (analog)",
[ 0x86 >> 1 ] = "tda9887",
};
static void do_i2c_scan(char *name, struct i2c_client *c)
{
unsigned char buf;
int i,rc;
for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) {
c->addr = i;
rc = i2c_master_recv(c,&buf,0);
if (rc < 0)
continue;
printk("%s: i2c scan: found device @ 0x%x [%s]\n",
name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
}
}
void saa7134_i2c_call_clients(struct saa7134_dev *dev,
unsigned int cmd, void *arg)
{
BUG_ON(NULL == dev->i2c_adap.algo_data);
i2c_clients_command(&dev->i2c_adap, cmd, arg);
}
int saa7134_i2c_register(struct saa7134_dev *dev)
{
dev->i2c_adap = saa7134_adap_template;
dev->i2c_adap.dev.parent = &dev->pci->dev;
strcpy(dev->i2c_adap.name,dev->name);
dev->i2c_adap.algo_data = dev;
i2c_add_adapter(&dev->i2c_adap);
dev->i2c_client = saa7134_client_template;
dev->i2c_client.adapter = &dev->i2c_adap;
saa7134_i2c_eeprom(dev,dev->eedata,sizeof(dev->eedata));
if (i2c_scan)
do_i2c_scan(dev->name,&dev->i2c_client);
return 0;
}
int saa7134_i2c_unregister(struct saa7134_dev *dev)
{
i2c_del_adapter(&dev->i2c_adap);
return 0;
}
/* ----------------------------------------------------------- */
/*
* Local variables:
* c-basic-offset: 8
* End:
*/