q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/net/ipv6/addrconf.c

4990 lines
118 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* IPv6 Address [auto]configuration
* Linux INET6 implementation
*
* Authors:
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
* Pedro Roque <roque@di.fc.ul.pt>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/*
* Changes:
*
* Janos Farkas : delete timer on ifdown
* <chexum@bankinf.banki.hu>
* Andi Kleen : kill double kfree on module
* unload.
* Maciej W. Rozycki : FDDI support
* sekiya@USAGI : Don't send too many RS
* packets.
* yoshfuji@USAGI : Fixed interval between DAD
* packets.
* YOSHIFUJI Hideaki @USAGI : improved accuracy of
* address validation timer.
* YOSHIFUJI Hideaki @USAGI : Privacy Extensions (RFC3041)
* support.
* Yuji SEKIYA @USAGI : Don't assign a same IPv6
* address on a same interface.
* YOSHIFUJI Hideaki @USAGI : ARCnet support
* YOSHIFUJI Hideaki @USAGI : convert /proc/net/if_inet6 to
* seq_file.
[IPV6]: Make ipv6_addr_type() more generic so that we can use it for source address selection. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:12 +00:00
* YOSHIFUJI Hideaki @USAGI : improved source address
* selection; consider scope,
* status etc.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
#define pr_fmt(fmt) "IPv6: " fmt
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/errno.h>
#include <linux/types.h>
net/*: use linux/kernel.h swap() tcp_sack_swap seems unnecessary so I pushed swap to the caller. Also removed comment that seemed then pointless, and added include when not already there. Compile tested. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 20:36:17 +00:00
#include <linux/kernel.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/net.h>
#include <linux/in6.h>
#include <linux/netdevice.h>
[IPv4]: Move interface address bits to linux/if_addr.h Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-05 06:04:54 +00:00
#include <linux/if_addr.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/if_arp.h>
#include <linux/if_arcnet.h>
#include <linux/if_infiniband.h>
#include <linux/route.h>
#include <linux/inetdevice.h>
#include <linux/init.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_SYSCTL
#include <linux/sysctl.h>
#endif
[PATCH] capable/capability.h (net/) net: Use <linux/capability.h> where capable() is used. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 20:17:47 +00:00
#include <linux/capability.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/delay.h>
#include <linux/notifier.h>
[PATCH] create a kstrdup library function This patch creates a new kstrdup library function and changes the "local" implementations in several places to use this function. Most of the changes come from the sound and net subsystems. The sound part had already been acknowledged by Takashi Iwai and the net part by David S. Miller. I left UML alone for now because I would need more time to read the code carefully before making changes there. Signed-off-by: Paulo Marques <pmarques@grupopie.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:02 +00:00
#include <linux/string.h>
ipv6: add ipv6_addr_hash() helper Introduce ipv6_addr_hash() helper doing a XOR on all bits of an IPv6 address, with an optimized x86_64 version. Use it in flow dissector, as suggested by Andrew McGregor, to reduce hash collision probabilities in fq_codel (and other users of flow dissector) Use it in ip6_tunnel.c and use more bit shuffling, as suggested by David Laight, as existing hash was ignoring most of them. Use it in sunrpc and use more bit shuffling, using hash_32(). Use it in net/ipv6/addrconf.c, using hash_32() as well. As a cleanup, use it in net/ipv4/tcp_metrics.c Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrew McGregor <andrewmcgr@gmail.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Tom Herbert <therbert@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18 08:11:12 +00:00
#include <linux/hash.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[NET]: Make /proc/net per network namespace This patch makes /proc/net per network namespace. It modifies the global variables proc_net and proc_net_stat to be per network namespace. The proc_net file helpers are modified to take a network namespace argument, and all of their callers are fixed to pass &init_net for that argument. This ensures that all of the /proc/net files are only visible and usable in the initial network namespace until the code behind them has been updated to be handle multiple network namespaces. Making /proc/net per namespace is necessary as at least some files in /proc/net depend upon the set of network devices which is per network namespace, and even more files in /proc/net have contents that are relevant to a single network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 10:01:34 +00:00
#include <net/net_namespace.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <net/sock.h>
#include <net/snmp.h>
6lowpan: IPv6 link local address According to the RFC4944 (Transmission of IPv6 Packets over IEEE 802.15.4 Networks), chapter 7: The IPv6 link-local address [RFC4291] for an IEEE 802.15.4 interface is formed by appending the Interface Identifier, as defined above, to the prefix FE80::/64. 10 bits 54 bits 64 bits +----------+-----------------------+----------------------------+ |1111111010| (zeros) | Interface Identifier | +----------+-----------------------+----------------------------+ This patch adds IPv6 address generation support for the 6lowpan interfaces. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 03:25:52 +00:00
#include <net/af_ieee802154.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <net/ipv6.h>
#include <net/protocol.h>
#include <net/ndisc.h>
#include <net/ip6_route.h>
#include <net/addrconf.h>
#include <net/tcp.h>
#include <net/ip.h>
[IPv6] address: Convert address notification to use rtnl_notify() Fixes a wrong use of current->pid as netlink pid. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-15 07:35:02 +00:00
#include <net/netlink.h>
[IPV6]: Defer IPv6 device initialization until a valid qdisc is specified To judge the timing for DAD, netif_carrier_ok() is used. However, there is a possibility that dev->qdisc stays noop_qdisc even if netif_carrier_ok() returns true. In that case, DAD NS is not sent out. We need to defer the IPv6 device initialization until a valid qdisc is specified. Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 09:53:43 +00:00
#include <net/pkt_sched.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/if_tunnel.h>
#include <linux/rtnetlink.h>
rtnl/ipv6: use netconf msg to advertise forwarding status Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:50 +00:00
#include <linux/netconf.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_IPV6_PRIVACY
#include <linux/random.h>
#endif
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
#include <linux/uaccess.h>
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
#include <asm/unaligned.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modules These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-15 15:47:34 +00:00
#include <linux/export.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Set to 3 to get tracing... */
#define ACONF_DEBUG 2
#if ACONF_DEBUG >= 3
#define ADBG(x) printk x
#else
#define ADBG(x)
#endif
#define INFINITY_LIFE_TIME 0xFFFFFFFF
ipv6: Expose reachable and retrans timer values as msecs Expose reachable and retrans timer values in msecs instead of jiffies. Both timer values are already exposed as msecs in the neighbour table netlink interface. The creation timestamp format with increased precision is kept but cleaned up. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 04:12:02 +00:00
static inline u32 cstamp_delta(unsigned long cstamp)
{
return (cstamp - INITIAL_JIFFIES) * 100UL / HZ;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_SYSCTL
[IPV6]: Unify and cleanup calls to addrconf_sysctl_register Currently this call is (ab)used similar to devinet one - it registers sysctls for devices and for the "default" confs, while the "all" sysctls are registered separately. But unlike its devinet brother, the passed inet6_device is needed. The fix is to make a __addrconf_sysctl_register(), which registers sysctls for all "devices" we need, including "default" and "all" :) The original addrconf_sysctl_register() calls the introduced function, passing the inet6_device, device name and ifindex (to be used as procname and ctl_name) into it. Thanks to Herbert again for pointing out, that we can shrink the argument list to 1 :) Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-01 13:58:37 +00:00
static void addrconf_sysctl_register(struct inet6_dev *idev);
[NETNS]: Clean out the ipv6-related sysctls creation/destruction The addrconf sysctls and neigh sysctls are registered and unregistered always in pairs, so they can be joined into one (well, two) functions, that accept the struct inet6_dev and do all the job. This also get rids of unneeded ifdefs inside the code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:41:21 +00:00
static void addrconf_sysctl_unregister(struct inet6_dev *idev);
#else
static inline void addrconf_sysctl_register(struct inet6_dev *idev)
{
}
static inline void addrconf_sysctl_unregister(struct inet6_dev *idev)
{
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
#ifdef CONFIG_IPV6_PRIVACY
ipv6: remove some deadcode __ipv6_regen_rndid no longer returns anything other than 0 so there's no point in verifying what it returns Signed-off-by: Sorin Dumitru <sdumitru@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30 02:01:45 +00:00
static void __ipv6_regen_rndid(struct inet6_dev *idev);
static void __ipv6_try_regen_rndid(struct inet6_dev *idev, struct in6_addr *tmpaddr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static void ipv6_regen_rndid(unsigned long data);
#endif
ipv6 addrconf: add accept_dad sysctl to control DAD operation. - If 0, disable DAD. - If 1, perform DAD (default). - If >1, perform DAD and disable IPv6 operation if DAD for MAC-based link-local address has been failed (RFC4862 5.4.5). We do not follow RFC4862 by default. Refer to the netdev thread entitled "Linux IPv6 DAD not full conform to RFC 4862 ?" http://www.spinics.net/lists/netdev/msg52027.html Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:18:38 +00:00
static int ipv6_generate_eui64(u8 *eui, struct net_device *dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int ipv6_count_addresses(struct inet6_dev *idev);
/*
* Configured unicast address hash table
*/
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
static struct hlist_head inet6_addr_lst[IN6_ADDR_HSIZE];
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
static DEFINE_SPINLOCK(addrconf_hash_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static void addrconf_verify(unsigned long);
[PATCH] timer initialization cleanup: DEFINE_TIMER Clean up timer initialization by introducing DEFINE_TIMER a'la DEFINE_SPINLOCK. Build and boot-tested on x86. A similar patch has been been in the -RT tree for some time. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 20:10:40 +00:00
static DEFINE_TIMER(addr_chk_timer, addrconf_verify, 0, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static DEFINE_SPINLOCK(addrconf_verify_lock);
static void addrconf_join_anycast(struct inet6_ifaddr *ifp);
static void addrconf_leave_anycast(struct inet6_ifaddr *ifp);
net: rename notifier defines for netdev type change Since generally there could be more netdevices changing type other than bonding, making this event type name "bonding-unrelated" Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10 10:28:56 +00:00
static void addrconf_type_change(struct net_device *dev,
unsigned long event);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int addrconf_ifdown(struct net_device *dev, int how);
ipv6: use addrconf_get_prefix_route for prefix route lookup [v2] Replace ip6_route_lookup() with addrconf_get_prefix_route() when looking up for a prefix route. This ensures that the connected prefix is looked up in the main table, and avoids the selection of other matching routes located in different tables as well as blackhole or prohibited entries. In addition, this fixes an Opps introduced by commit 64c6d08e (ipv6: del unreachable route when an addr is deleted on lo), that would occur when a blackhole or prohibited entry is selected by ip6_route_lookup(). Such entries have a NULL rt6i_table argument, which is accessed by __ip6_del_rt() when trying to lock rt6i_table->tb6_lock. The function addrconf_is_prefix_route() is not used anymore and is removed. [v2] Minor indentation cleanup and log updates. Signed-off-by: Romain Kuntz <r.kuntz@ipflavors.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-09 21:06:03 +00:00
static struct rt6_info *addrconf_get_prefix_route(const struct in6_addr *pfx,
int plen,
const struct net_device *dev,
u32 flags, u32 noflags);
ipv6: Remove unused argument to addrconf_dad_start(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 01:37:40 +00:00
static void addrconf_dad_start(struct inet6_ifaddr *ifp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static void addrconf_dad_timer(unsigned long data);
static void addrconf_dad_completed(struct inet6_ifaddr *ifp);
[IPV6]: Run DAD when the link becomes ready. If the link was not available when the interface was created, run DAD for pending tentative addresses when the link becomes ready. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:44 +00:00
static void addrconf_dad_run(struct inet6_dev *idev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static void addrconf_rs_timer(unsigned long data);
static void __ipv6_ifa_notify(int event, struct inet6_ifaddr *ifa);
static void ipv6_ifa_notify(int event, struct inet6_ifaddr *ifa);
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
static void inet6_prefix_notify(int event, struct inet6_dev *idev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct prefix_info *pinfo);
ipv6: Fix bug in ipv6_chk_same_addr(). hlist_for_each_entry(p...) will not necessarily initialize 'p' to anything if the hlist is empty. GCC notices this and emits a warning. Just return true explicitly when we hit a match, and return false is we fall out of the loop without one. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:18:00 +00:00
static bool ipv6_chk_same_addr(struct net *net, const struct in6_addr *addr,
struct net_device *dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 09:16:30 +00:00
static ATOMIC_NOTIFIER_HEAD(inet6addr_chain);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6: make struct ipv6_devconf static struct ipv6_devconf can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22 21:21:58 +00:00
static struct ipv6_devconf ipv6_devconf __read_mostly = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.forwarding = 0,
.hop_limit = IPV6_DEFAULT_HOPLIMIT,
.mtu6 = IPV6_MIN_MTU,
.accept_ra = 1,
.accept_redirects = 1,
.autoconf = 1,
.force_mld_version = 0,
.dad_transmits = 1,
.rtr_solicits = MAX_RTR_SOLICITATIONS,
.rtr_solicit_interval = RTR_SOLICITATION_INTERVAL,
.rtr_solicit_delay = MAX_RTR_SOLICITATION_DELAY,
#ifdef CONFIG_IPV6_PRIVACY
.use_tempaddr = 0,
.temp_valid_lft = TEMP_VALID_LIFETIME,
.temp_prefered_lft = TEMP_PREFERRED_LIFETIME,
.regen_max_retry = REGEN_MAX_RETRY,
.max_desync_factor = MAX_DESYNC_FACTOR,
#endif
.max_addresses = IPV6_MAX_ADDRESSES,
[IPV6]: ROUTE: Add accept_ra_defrtr sysctl. This controls whether we accept default router information in RAs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:55:08 +00:00
.accept_ra_defrtr = 1,
[IPV6]: ADDRCONF: Add accept_ra_pinfo sysctl. This controls whether we accept Prefix Information in RAs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:55:26 +00:00
.accept_ra_pinfo = 1,
[IPV6]: ROUTE: Add accept_ra_rtr_pref sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:05:30 +00:00
#ifdef CONFIG_IPV6_ROUTER_PREF
.accept_ra_rtr_pref = 1,
[IPV6]: ROUTE: Add router_probe_interval sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:05:47 +00:00
.rtr_probe_interval = 60 * HZ,
[IPV6]: ROUTE: Add accept_ra_rt_info_max_plen sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:07:03 +00:00
#ifdef CONFIG_IPV6_ROUTE_INFO
.accept_ra_rt_info_max_plen = 0,
#endif
[IPV6]: ROUTE: Add accept_ra_rtr_pref sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:05:30 +00:00
#endif
[IPV6] NDISC: Add proxy_ndp sysctl. We do not always need proxy NDP functionality even we enable forwarding. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:43:49 +00:00
.proxy_ndp = 0,
[IPV6]: Disallow RH0 by default. A security issue is emerging. Disallow Routing Header Type 0 by default as we have been doing for IPv4. Note: We allow RH2 by default because it is harmless. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-24 21:58:30 +00:00
.accept_source_route = 0, /* we do not accept RH0 by default. */
ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:17:11 +00:00
.disable_ipv6 = 0,
ipv6 addrconf: add accept_dad sysctl to control DAD operation. - If 0, disable DAD. - If 1, perform DAD (default). - If >1, perform DAD and disable IPv6 operation if DAD for MAC-based link-local address has been failed (RFC4862 5.4.5). We do not follow RFC4862 by default. Refer to the netdev thread entitled "Linux IPv6 DAD not full conform to RFC 4862 ?" http://www.spinics.net/lists/netdev/msg52027.html Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:18:38 +00:00
.accept_dad = 1,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
[NET/IPV4/IPV6]: Change some sysctl variables to __read_mostly Change net/core, ipv4 and ipv6 sysctl variables to __read_mostly. Couldn't actually measure any performance increase while testing (.3% I consider noise), but seems like the right thing to do. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:15:41 +00:00
static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.forwarding = 0,
.hop_limit = IPV6_DEFAULT_HOPLIMIT,
.mtu6 = IPV6_MIN_MTU,
.accept_ra = 1,
.accept_redirects = 1,
.autoconf = 1,
.dad_transmits = 1,
.rtr_solicits = MAX_RTR_SOLICITATIONS,
.rtr_solicit_interval = RTR_SOLICITATION_INTERVAL,
.rtr_solicit_delay = MAX_RTR_SOLICITATION_DELAY,
#ifdef CONFIG_IPV6_PRIVACY
.use_tempaddr = 0,
.temp_valid_lft = TEMP_VALID_LIFETIME,
.temp_prefered_lft = TEMP_PREFERRED_LIFETIME,
.regen_max_retry = REGEN_MAX_RETRY,
.max_desync_factor = MAX_DESYNC_FACTOR,
#endif
.max_addresses = IPV6_MAX_ADDRESSES,
[IPV6]: ROUTE: Add accept_ra_defrtr sysctl. This controls whether we accept default router information in RAs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:55:08 +00:00
.accept_ra_defrtr = 1,
[IPV6]: ADDRCONF: Add accept_ra_pinfo sysctl. This controls whether we accept Prefix Information in RAs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:55:26 +00:00
.accept_ra_pinfo = 1,
[IPV6]: ROUTE: Add accept_ra_rtr_pref sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:05:30 +00:00
#ifdef CONFIG_IPV6_ROUTER_PREF
.accept_ra_rtr_pref = 1,
[IPV6]: ROUTE: Add router_probe_interval sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:05:47 +00:00
.rtr_probe_interval = 60 * HZ,
[IPV6]: ROUTE: Add accept_ra_rt_info_max_plen sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:07:03 +00:00
#ifdef CONFIG_IPV6_ROUTE_INFO
.accept_ra_rt_info_max_plen = 0,
#endif
[IPV6]: ROUTE: Add accept_ra_rtr_pref sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:05:30 +00:00
#endif
[IPV6] NDISC: Add proxy_ndp sysctl. We do not always need proxy NDP functionality even we enable forwarding. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:43:49 +00:00
.proxy_ndp = 0,
[IPV6]: Disallow RH0 by default. A security issue is emerging. Disallow Routing Header Type 0 by default as we have been doing for IPv4. Note: We allow RH2 by default because it is harmless. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-24 21:58:30 +00:00
.accept_source_route = 0, /* we do not accept RH0 by default. */
ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:17:11 +00:00
.disable_ipv6 = 0,
ipv6 addrconf: add accept_dad sysctl to control DAD operation. - If 0, disable DAD. - If 1, perform DAD (default). - If >1, perform DAD and disable IPv6 operation if DAD for MAC-based link-local address has been failed (RFC4862 5.4.5). We do not follow RFC4862 by default. Refer to the netdev thread entitled "Linux IPv6 DAD not full conform to RFC 4862 ?" http://www.spinics.net/lists/netdev/msg52027.html Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:18:38 +00:00
.accept_dad = 1,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
/* IPv6 Wildcard Address and Loopback Address defined by RFC2553 */
const struct in6_addr in6addr_any = IN6ADDR_ANY_INIT;
const struct in6_addr in6addr_loopback = IN6ADDR_LOOPBACK_INIT;
[IPV6]: Define constants for link-local multicast addresses. - Define link-local all-node / all-router multicast addresses. - Remove ipv6_addr_all_nodes() and ipv6_addr_all_routers(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:11 +00:00
const struct in6_addr in6addr_linklocal_allnodes = IN6ADDR_LINKLOCAL_ALLNODES_INIT;
const struct in6_addr in6addr_linklocal_allrouters = IN6ADDR_LINKLOCAL_ALLROUTERS_INIT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6]: Defer IPv6 device initialization until a valid qdisc is specified To judge the timing for DAD, netif_carrier_ok() is used. However, there is a possibility that dev->qdisc stays noop_qdisc even if netif_carrier_ok() returns true. In that case, DAD NS is not sent out. We need to defer the IPv6 device initialization until a valid qdisc is specified. Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 09:53:43 +00:00
/* Check if a valid qdisc is available */
pkt_sched: Add qdisc_tx_is_noop() helper and use in IPV6. This indicates if the NOOP scheduler is what is active for TX on a given device. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-09 06:01:27 +00:00
static inline bool addrconf_qdisc_ok(const struct net_device *dev)
[IPV6]: Defer IPv6 device initialization until a valid qdisc is specified To judge the timing for DAD, netif_carrier_ok() is used. However, there is a possibility that dev->qdisc stays noop_qdisc even if netif_carrier_ok() returns true. In that case, DAD NS is not sent out. We need to defer the IPv6 device initialization until a valid qdisc is specified. Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 09:53:43 +00:00
{
pkt_sched: Add qdisc_tx_is_noop() helper and use in IPV6. This indicates if the NOOP scheduler is what is active for TX on a given device. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-09 06:01:27 +00:00
return !qdisc_tx_is_noop(dev);
[IPV6]: Defer IPv6 device initialization until a valid qdisc is specified To judge the timing for DAD, netif_carrier_ok() is used. However, there is a possibility that dev->qdisc stays noop_qdisc even if netif_carrier_ok() returns true. In that case, DAD NS is not sent out. We need to defer the IPv6 device initialization until a valid qdisc is specified. Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 09:53:43 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static void addrconf_del_timer(struct inet6_ifaddr *ifp)
{
if (del_timer(&ifp->timer))
__in6_ifa_put(ifp);
}
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
enum addrconf_timer_t {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
AC_NONE,
AC_DAD,
AC_RS,
};
static void addrconf_mod_timer(struct inet6_ifaddr *ifp,
enum addrconf_timer_t what,
unsigned long when)
{
if (!del_timer(&ifp->timer))
in6_ifa_hold(ifp);
switch (what) {
case AC_DAD:
ifp->timer.function = addrconf_dad_timer;
break;
case AC_RS:
ifp->timer.function = addrconf_rs_timer;
break;
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
default:
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ifp->timer.expires = jiffies + when;
add_timer(&ifp->timer);
}
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
static int snmp6_alloc_dev(struct inet6_dev *idev)
{
percpu: add __percpu sparse annotations to net Add __percpu sparse annotations to net. These annotations are to make sparse consider percpu variables to be in a different address space and warn if accessed without going through percpu accessors. This patch doesn't affect normal builds. The macro and type tricks around snmp stats make things a bit interesting. DEFINE/DECLARE_SNMP_STAT() macros mark the target field as __percpu and SNMP_UPD_PO_STATS() macro is updated accordingly. All snmp_mib_*() users which used to cast the argument to (void **) are updated to cast it to (void __percpu **). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16 15:20:26 +00:00
if (snmp_mib_init((void __percpu **)idev->stats.ipv6,
snmp: add align parameter to snmp_mib_init() In preparation for 64bit snmp counters for some mibs, add an 'align' parameter to snmp_mib_init(), instead of assuming mibs only contain 'unsigned long' fields. Callers can use __alignof__(type) to provide correct alignment. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> CC: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-22 20:58:41 +00:00
sizeof(struct ipstats_mib),
__alignof__(struct ipstats_mib)) < 0)
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
goto err_ip;
ipv6: reduce per device ICMP mib sizes ipv6 has per device ICMP SNMP counters, taking too much space because they use percpu storage. needed size per device is : (512+4)*sizeof(long)*number_of_possible_cpus*2 On a 32bit kernel, 16 possible cpus, this wastes more than 64kbytes of memory per ipv6 enabled network device, taken in vmalloc pool. Since ICMP messages are rare, just use shared counters (atomic_long_t) Per network space ICMP counters are still using percpu memory, we might also convert them to shared counters in a future patch. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 01:14:23 +00:00
idev->stats.icmpv6dev = kzalloc(sizeof(struct icmpv6_mib_device),
GFP_KERNEL);
if (!idev->stats.icmpv6dev)
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
goto err_icmp;
ipv6: reduce per device ICMP mib sizes ipv6 has per device ICMP SNMP counters, taking too much space because they use percpu storage. needed size per device is : (512+4)*sizeof(long)*number_of_possible_cpus*2 On a 32bit kernel, 16 possible cpus, this wastes more than 64kbytes of memory per ipv6 enabled network device, taken in vmalloc pool. Since ICMP messages are rare, just use shared counters (atomic_long_t) Per network space ICMP counters are still using percpu memory, we might also convert them to shared counters in a future patch. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 01:14:23 +00:00
idev->stats.icmpv6msgdev = kzalloc(sizeof(struct icmpv6msg_mib_device),
GFP_KERNEL);
if (!idev->stats.icmpv6msgdev)
[IPV6]: Add ICMPMsgStats MIB (RFC 4293) [rev 2] Background: RFC 4293 deprecates existing individual, named ICMP type counters to be replaced with the ICMPMsgStatsTable. This table includes entries for both IPv4 and IPv6, and requires counting of all ICMP types, whether or not the machine implements the type. These patches "remove" (but not really) the existing counters, and replace them with the ICMPMsgStats tables for v4 and v6. It includes the named counters in the /proc places they were, but gets the values for them from the new tables. It also counts packets generated from raw socket output (e.g., OutEchoes, MLD queries, RA's from radvd, etc). Changes: 1) create icmpmsg_statistics mib 2) create icmpv6msg_statistics mib 3) modify existing counters to use these 4) modify /proc/net/snmp to add "IcmpMsg" with all ICMP types listed by number for easy SNMP parsing 5) modify /proc/net/snmp printing for "Icmp" to get the named data from new counters. [new to 2nd revision] 6) support per-interface ICMP stats 7) use common macro for per-device stat macros Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 23:52:35 +00:00
goto err_icmpmsg;
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
return 0;
[IPV6]: Add ICMPMsgStats MIB (RFC 4293) [rev 2] Background: RFC 4293 deprecates existing individual, named ICMP type counters to be replaced with the ICMPMsgStatsTable. This table includes entries for both IPv4 and IPv6, and requires counting of all ICMP types, whether or not the machine implements the type. These patches "remove" (but not really) the existing counters, and replace them with the ICMPMsgStats tables for v4 and v6. It includes the named counters in the /proc places they were, but gets the values for them from the new tables. It also counts packets generated from raw socket output (e.g., OutEchoes, MLD queries, RA's from radvd, etc). Changes: 1) create icmpmsg_statistics mib 2) create icmpv6msg_statistics mib 3) modify existing counters to use these 4) modify /proc/net/snmp to add "IcmpMsg" with all ICMP types listed by number for easy SNMP parsing 5) modify /proc/net/snmp printing for "Icmp" to get the named data from new counters. [new to 2nd revision] 6) support per-interface ICMP stats 7) use common macro for per-device stat macros Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 23:52:35 +00:00
err_icmpmsg:
ipv6: reduce per device ICMP mib sizes ipv6 has per device ICMP SNMP counters, taking too much space because they use percpu storage. needed size per device is : (512+4)*sizeof(long)*number_of_possible_cpus*2 On a 32bit kernel, 16 possible cpus, this wastes more than 64kbytes of memory per ipv6 enabled network device, taken in vmalloc pool. Since ICMP messages are rare, just use shared counters (atomic_long_t) Per network space ICMP counters are still using percpu memory, we might also convert them to shared counters in a future patch. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 01:14:23 +00:00
kfree(idev->stats.icmpv6dev);
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
err_icmp:
percpu: add __percpu sparse annotations to net Add __percpu sparse annotations to net. These annotations are to make sparse consider percpu variables to be in a different address space and warn if accessed without going through percpu accessors. This patch doesn't affect normal builds. The macro and type tricks around snmp stats make things a bit interesting. DEFINE/DECLARE_SNMP_STAT() macros mark the target field as __percpu and SNMP_UPD_PO_STATS() macro is updated accordingly. All snmp_mib_*() users which used to cast the argument to (void **) are updated to cast it to (void __percpu **). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16 15:20:26 +00:00
snmp_mib_free((void __percpu **)idev->stats.ipv6);
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
err_ip:
[IPV6]: Cleanup snmp6_alloc_dev() This functions is never called with NULL or not setup argument, so the checks inside are redundant. Also, the return value is always -ENOMEM, so no need in additional variable for this. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-18 04:25:32 +00:00
return -ENOMEM;
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
}
[IPV6]: Fix return type for snmp6_free_dev() This call is essentially void. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-18 04:23:43 +00:00
static void snmp6_free_dev(struct inet6_dev *idev)
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
{
ipv6: reduce per device ICMP mib sizes ipv6 has per device ICMP SNMP counters, taking too much space because they use percpu storage. needed size per device is : (512+4)*sizeof(long)*number_of_possible_cpus*2 On a 32bit kernel, 16 possible cpus, this wastes more than 64kbytes of memory per ipv6 enabled network device, taken in vmalloc pool. Since ICMP messages are rare, just use shared counters (atomic_long_t) Per network space ICMP counters are still using percpu memory, we might also convert them to shared counters in a future patch. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 01:14:23 +00:00
kfree(idev->stats.icmpv6msgdev);
kfree(idev->stats.icmpv6dev);
percpu: add __percpu sparse annotations to net Add __percpu sparse annotations to net. These annotations are to make sparse consider percpu variables to be in a different address space and warn if accessed without going through percpu accessors. This patch doesn't affect normal builds. The macro and type tricks around snmp stats make things a bit interesting. DEFINE/DECLARE_SNMP_STAT() macros mark the target field as __percpu and SNMP_UPD_PO_STATS() macro is updated accordingly. All snmp_mib_*() users which used to cast the argument to (void **) are updated to cast it to (void __percpu **). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16 15:20:26 +00:00
snmp_mib_free((void __percpu **)idev->stats.ipv6);
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Nobody refers to this device, we may destroy it. */
void in6_dev_finish_destroy(struct inet6_dev *idev)
{
struct net_device *dev = idev->dev;
net: convert BUG_TRAP to generic WARN_ON Removes legacy reinvent-the-wheel type thing. The generic machinery integrates much better to automated debugging aids such as kerneloops.org (and others), and is unambiguous due to better naming. Non-intuively BUG_TRAP() is actually equal to WARN_ON() rather than BUG_ON() though some might actually be promoted to BUG_ON() but I left that to future. I could make at least one BUILD_BUG_ON conversion. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-26 04:43:18 +00:00
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
WARN_ON(!list_empty(&idev->addr_list));
net: convert BUG_TRAP to generic WARN_ON Removes legacy reinvent-the-wheel type thing. The generic machinery integrates much better to automated debugging aids such as kerneloops.org (and others), and is unambiguous due to better naming. Non-intuively BUG_TRAP() is actually equal to WARN_ON() rather than BUG_ON() though some might actually be promoted to BUG_ON() but I left that to future. I could make at least one BUILD_BUG_ON conversion. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-26 04:43:18 +00:00
WARN_ON(idev->mc_list != NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef NET_REFCNT_DEBUG
net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debug Use the current debugging style and enable dynamic_debug. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:54 +00:00
pr_debug("%s: %s\n", __func__, dev ? dev->name : "NIL");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
dev_put(dev);
if (!idev->dead) {
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
pr_warn("Freeing alive inet6 device %p\n", idev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return;
}
snmp6_free_dev(idev);
net,rcu: convert call_rcu(in6_dev_finish_destroy_rcu) to kfree_rcu() The rcu callback in6_dev_finish_destroy_rcu() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(in6_dev_finish_destroy_rcu). Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-03-15 09:59:14 +00:00
kfree_rcu(idev, rcu);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6]: Decentralize EXPORT_SYMBOLs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-02-22 13:05:40 +00:00
EXPORT_SYMBOL(in6_dev_finish_destroy);
net/ipv6/addrconf.c: Checkpatch cleanups net/ipv6/addrconf.c:340: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:342: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:444: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:1337: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:1526: ERROR: "(foo*)" should be "(foo *)" net/ipv6/addrconf.c:1671: ERROR: open brace '{' following function declarations go on the next line net/ipv6/addrconf.c:1914: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2368: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2370: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2416: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2437: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2573: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:3797: ERROR: "foo* bar" should be "foo *bar" Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 07:49:08 +00:00
static struct inet6_dev *ipv6_add_dev(struct net_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct inet6_dev *ndev;
ASSERT_RTNL();
if (dev->mtu < IPV6_MIN_MTU)
return NULL;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
ndev = kzalloc(sizeof(struct inet6_dev), GFP_KERNEL);
[IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2 Here are some possible (and trivial) cleanups. - use kzalloc() where possible - invert allocation failure test like if (object) { /* Rest of function here */ } to if (object == NULL) return NULL; /* Rest of function here */ Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 07:01:47 +00:00
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
if (ndev == NULL)
return NULL;
[IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2 Here are some possible (and trivial) cleanups. - use kzalloc() where possible - invert allocation failure test like if (object) { /* Rest of function here */ } to if (object == NULL) return NULL; /* Rest of function here */ Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 07:01:47 +00:00
rwlock_init(&ndev->lock);
ndev->dev = dev;
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
INIT_LIST_HEAD(&ndev->addr_list);
[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS. Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 12:47:49 +00:00
memcpy(&ndev->cnf, dev_net(dev)->ipv6.devconf_dflt, sizeof(ndev->cnf));
[IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2 Here are some possible (and trivial) cleanups. - use kzalloc() where possible - invert allocation failure test like if (object) { /* Rest of function here */ } to if (object == NULL) return NULL; /* Rest of function here */ Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 07:01:47 +00:00
ndev->cnf.mtu6 = dev->mtu;
ndev->cnf.sysctl = NULL;
ndev->nd_parms = neigh_parms_alloc(dev, &nd_tbl);
if (ndev->nd_parms == NULL) {
kfree(ndev);
return NULL;
}
net: Disable LRO on devices that are forwarding Large Receive Offload (LRO) is only appropriate for packets that are destined for the host, and should be disabled if received packets may be forwarded. It can also confuse the GSO on output. Add dev_disable_lro() function which uses the appropriate ethtool ops to disable LRO if enabled. Add calls to dev_disable_lro() in br_add_if() and functions that enable IPv4 and IPv6 forwarding. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-19 23:15:47 +00:00
if (ndev->cnf.forwarding)
dev_disable_lro(dev);
[IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2 Here are some possible (and trivial) cleanups. - use kzalloc() where possible - invert allocation failure test like if (object) { /* Rest of function here */ } to if (object == NULL) return NULL; /* Rest of function here */ Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 07:01:47 +00:00
/* We refer to the device */
dev_hold(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2 Here are some possible (and trivial) cleanups. - use kzalloc() where possible - invert allocation failure test like if (object) { /* Rest of function here */ } to if (object == NULL) return NULL; /* Rest of function here */ Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 07:01:47 +00:00
if (snmp6_alloc_dev(ndev) < 0) {
ADBG((KERN_WARNING
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
"%s: cannot allocate memory for statistics; dev=%s.\n",
net: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-06 04:47:47 +00:00
__func__, dev->name));
[IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2 Here are some possible (and trivial) cleanups. - use kzalloc() where possible - invert allocation failure test like if (object) { /* Rest of function here */ } to if (object == NULL) return NULL; /* Rest of function here */ Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 07:01:47 +00:00
neigh_parms_release(&nd_tbl, ndev->nd_parms);
ipv6: fix a possible double free When calling snmp6_alloc_dev fails, the snmp6 relevant memory are freed by snmp6_alloc_dev. Calling in6_dev_finish_destroy will free these memory twice. Double free will lead that undefined behavior occurs. Signed-off-by: Roy Li <rongqing.li@windriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-20 19:10:16 +00:00
dev_put(dev);
kfree(ndev);
[IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2 Here are some possible (and trivial) cleanups. - use kzalloc() where possible - invert allocation failure test like if (object) { /* Rest of function here */ } to if (object == NULL) return NULL; /* Rest of function here */ Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 07:01:47 +00:00
return NULL;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2 Here are some possible (and trivial) cleanups. - use kzalloc() where possible - invert allocation failure test like if (object) { /* Rest of function here */ } to if (object == NULL) return NULL; /* Rest of function here */ Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 07:01:47 +00:00
if (snmp6_register_dev(ndev) < 0) {
ADBG((KERN_WARNING
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
"%s: cannot create /proc/net/dev_snmp6/%s\n",
net: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-06 04:47:47 +00:00
__func__, dev->name));
[IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2 Here are some possible (and trivial) cleanups. - use kzalloc() where possible - invert allocation failure test like if (object) { /* Rest of function here */ } to if (object == NULL) return NULL; /* Rest of function here */ Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 07:01:47 +00:00
neigh_parms_release(&nd_tbl, ndev->nd_parms);
ndev->dead = 1;
in6_dev_finish_destroy(ndev);
return NULL;
}
/* One reference from device. We must do this before
* we invoke __ipv6_regen_rndid().
*/
in6_dev_hold(ndev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6 addrconf: add accept_dad sysctl to control DAD operation. - If 0, disable DAD. - If 1, perform DAD (default). - If >1, perform DAD and disable IPv6 operation if DAD for MAC-based link-local address has been failed (RFC4862 5.4.5). We do not follow RFC4862 by default. Refer to the netdev thread entitled "Linux IPv6 DAD not full conform to RFC 4862 ?" http://www.spinics.net/lists/netdev/msg52027.html Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:18:38 +00:00
if (dev->flags & (IFF_NOARP | IFF_LOOPBACK))
ndev->cnf.accept_dad = -1;
ipv6: use IS_ENABLED() #if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29 16:23:10 +00:00
#if IS_ENABLED(CONFIG_IPV6_SIT)
[IPV6] ADDRCONF: Ensure disabling multicast RS even if privacy extensions are disabled. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-14 06:42:18 +00:00
if (dev->type == ARPHRD_SIT && (dev->priv_flags & IFF_ISATAP)) {
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
pr_info("%s: Disabled Multicast RS\n", dev->name);
[IPV6] ADDRCONF: Ensure disabling multicast RS even if privacy extensions are disabled. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-14 06:42:18 +00:00
ndev->cnf.rtr_solicits = 0;
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_IPV6_PRIVACY
ipv6: convert temporary address list to list macros Use list macros instead of open coded linked list. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:09 +00:00
INIT_LIST_HEAD(&ndev->tempaddr_list);
[NET]: Convert init_timer into setup_timer Many-many code in the kernel initialized the timer->function and timer->data together with calling init_timer(timer). There is already a helper for this. Use it for networking code. The patch is HUGE, but makes the code 130 lines shorter (98 insertions(+), 228 deletions(-)). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-24 05:20:07 +00:00
setup_timer(&ndev->regen_timer, ipv6_regen_rndid, (unsigned long)ndev);
[IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2 Here are some possible (and trivial) cleanups. - use kzalloc() where possible - invert allocation failure test like if (object) { /* Rest of function here */ } to if (object == NULL) return NULL; /* Rest of function here */ Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 07:01:47 +00:00
if ((dev->flags&IFF_LOOPBACK) ||
dev->type == ARPHRD_TUNNEL ||
[IPV6] ADDRCONF: Don't generate temporary address for ip6-ip6 interface. As far as I can remember, I was going to disable privacy extensions on all "tunnel" interfaces. Disable it on ip6-ip6 interface as well. Also, just remove ifdefs for SIT for simplicity. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-14 06:47:11 +00:00
dev->type == ARPHRD_TUNNEL6 ||
[IPV6]: Seperate sit driver to extra module (addrconf.c changes) This patch contains the changes to net/ipv6/addrconf.c to remove sit specific code if the sit driver is not selected. Signed-off-by: Joerg Roedel <joro-lkml@zlug.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-10 21:49:53 +00:00
dev->type == ARPHRD_SIT ||
dev->type == ARPHRD_NONE) {
[IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2 Here are some possible (and trivial) cleanups. - use kzalloc() where possible - invert allocation failure test like if (object) { /* Rest of function here */ } to if (object == NULL) return NULL; /* Rest of function here */ Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 07:01:47 +00:00
ndev->cnf.use_tempaddr = -1;
} else {
in6_dev_hold(ndev);
ipv6_regen_rndid((unsigned long) ndev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
[IPV6]: Defer IPv6 device initialization until a valid qdisc is specified To judge the timing for DAD, netif_carrier_ok() is used. However, there is a possibility that dev->qdisc stays noop_qdisc even if netif_carrier_ok() returns true. In that case, DAD NS is not sent out. We need to defer the IPv6 device initialization until a valid qdisc is specified. Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 09:53:43 +00:00
if (netif_running(dev) && addrconf_qdisc_ok(dev))
[IPV6]: Set IF_READY if the device is up and has carrier We still need to set the IF_READY flag in ipv6_add_dev for the case where all addresses (including the link-local) are deleted and then recreated. In that case the IPv6 device too will be destroyed and then recreated. In order to prevent the original problem, we simply ensure that the device is up before setting IF_READY. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-27 21:31:52 +00:00
ndev->if_flags |= IF_READY;
[IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2 Here are some possible (and trivial) cleanups. - use kzalloc() where possible - invert allocation failure test like if (object) { /* Rest of function here */ } to if (object == NULL) return NULL; /* Rest of function here */ Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 07:01:47 +00:00
ipv6_mc_init_dev(ndev);
ndev->tstamp = jiffies;
[IPV6]: Unify and cleanup calls to addrconf_sysctl_register Currently this call is (ab)used similar to devinet one - it registers sysctls for devices and for the "default" confs, while the "all" sysctls are registered separately. But unlike its devinet brother, the passed inet6_device is needed. The fix is to make a __addrconf_sysctl_register(), which registers sysctls for all "devices" we need, including "default" and "all" :) The original addrconf_sysctl_register() calls the introduced function, passing the inet6_device, device name and ifindex (to be used as procname and ctl_name) into it. Thanks to Herbert again for pointing out, that we can shrink the argument list to 1 :) Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-01 13:58:37 +00:00
addrconf_sysctl_register(ndev);
[IPV4/IPV6]: Fix inet{,6} device initialization order. It is important that we only assign dev->ip{,6}_ptr only after all portions of the inet{,6} are setup. Otherwise we can receive packets before the multicast spinlocks et al. are initialized. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-04 20:31:14 +00:00
/* protected by rtnl_lock */
net: reintroduce missing rcu_assign_pointer() calls commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER) did a lot of incorrect changes, since it did a complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x, y). We miss needed barriers, even on x86, when y is not NULL. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-12 04:41:32 +00:00
rcu_assign_pointer(dev->ip6_ptr, ndev);
[IPV6] MCAST: Fix joining all-node multicast group on device initialization. Join all-node multicast group after assignment of dev->ip6_ptr because it must be assigned when ipv6_dev_mc_inc() is called. This fixes Bug#7817, reported by <gernoth@informatik.uni-erlangen.de>. Closes: 7817 Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-15 05:48:40 +00:00
/* Join all-node multicast group */
[IPV6]: Define constants for link-local multicast addresses. - Define link-local all-node / all-router multicast addresses. - Remove ipv6_addr_all_nodes() and ipv6_addr_all_routers(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:11 +00:00
ipv6_dev_mc_inc(dev, &in6addr_linklocal_allnodes);
[IPV6] MCAST: Fix joining all-node multicast group on device initialization. Join all-node multicast group after assignment of dev->ip6_ptr because it must be assigned when ipv6_dev_mc_inc() is called. This fixes Bug#7817, reported by <gernoth@informatik.uni-erlangen.de>. Closes: 7817 Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-15 05:48:40 +00:00
IPv6: Fix not join all-router mcast group when forwarding set. When forwarding was set and a new net device is register, we need add this device to the all-router mcast group. Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-05 14:45:17 +00:00
/* Join all-router multicast group if forwarding is set */
ipv6: Fix Smatch warning. With commit d6ddef9e641d(IPv6: Fix not join all-router mcast group when forwarding set.) I check 'dev' after it's dereference that leads to a Smatch complaint: net/ipv6/addrconf.c:438 ipv6_add_dev() warn: variable dereferenced before check 'dev' (see line 432) net/ipv6/addrconf.c 431 /* protected by rtnl_lock */ 432 rcu_assign_pointer(dev->ip6_ptr, ndev); ^^^^^^^^^^^^ Old dereference. 433 434 /* Join all-node multicast group */ 435 ipv6_dev_mc_inc(dev, &in6addr_linklocal_allnodes); 436 437 /* Join all-router multicast group if forwarding is set */ 438 if (ndev->cnf.forwarding && dev && (dev->flags & IFF_MULTICAST)) ^^^ Remove the check to avoid the complaint as 'dev' can't be NULL. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07 14:58:07 +00:00
if (ndev->cnf.forwarding && (dev->flags & IFF_MULTICAST))
IPv6: Fix not join all-router mcast group when forwarding set. When forwarding was set and a new net device is register, we need add this device to the all-router mcast group. Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-05 14:45:17 +00:00
ipv6_dev_mc_inc(dev, &in6addr_linklocal_allrouters);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return ndev;
}
net/ipv6/addrconf.c: Checkpatch cleanups net/ipv6/addrconf.c:340: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:342: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:444: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:1337: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:1526: ERROR: "(foo*)" should be "(foo *)" net/ipv6/addrconf.c:1671: ERROR: open brace '{' following function declarations go on the next line net/ipv6/addrconf.c:1914: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2368: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2370: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2416: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2437: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2573: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:3797: ERROR: "foo* bar" should be "foo *bar" Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 07:49:08 +00:00
static struct inet6_dev *ipv6_find_idev(struct net_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct inet6_dev *idev;
ASSERT_RTNL();
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
idev = __in6_dev_get(dev);
if (!idev) {
idev = ipv6_add_dev(dev);
if (!idev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return NULL;
}
[IPV6]: Run DAD when the link becomes ready. If the link was not available when the interface was created, run DAD for pending tentative addresses when the link becomes ready. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:44 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (dev->flags&IFF_UP)
ipv6_mc_up(idev);
return idev;
}
rtnl/ipv6: use netconf msg to advertise forwarding status Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:50 +00:00
static int inet6_netconf_msgsize_devconf(int type)
{
int size = NLMSG_ALIGN(sizeof(struct netconfmsg))
+ nla_total_size(4); /* NETCONFA_IFINDEX */
rtnl/ipv6: add support of RTM_GETNETCONF This message allows to get the devconf for an interface. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:51 +00:00
/* type -1 is used for ALL */
if (type == -1 || type == NETCONFA_FORWARDING)
rtnl/ipv6: use netconf msg to advertise forwarding status Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:50 +00:00
size += nla_total_size(4);
ipv6: Protect ->mc_forwarding access with CONFIG_IPV6_MROUTE Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 19:46:34 +00:00
#ifdef CONFIG_IPV6_MROUTE
netconf: advertise mc_forwarding status This patch advertise the MC_FORWARDING status for IPv4 and IPv6. This field is readonly, only multicast engine in the kernel updates it. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 01:13:35 +00:00
if (type == -1 || type == NETCONFA_MC_FORWARDING)
size += nla_total_size(4);
ipv6: Protect ->mc_forwarding access with CONFIG_IPV6_MROUTE Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 19:46:34 +00:00
#endif
rtnl/ipv6: use netconf msg to advertise forwarding status Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:50 +00:00
return size;
}
static int inet6_netconf_fill_devconf(struct sk_buff *skb, int ifindex,
struct ipv6_devconf *devconf, u32 portid,
u32 seq, int event, unsigned int flags,
int type)
{
struct nlmsghdr *nlh;
struct netconfmsg *ncm;
nlh = nlmsg_put(skb, portid, seq, event, sizeof(struct netconfmsg),
flags);
if (nlh == NULL)
return -EMSGSIZE;
ncm = nlmsg_data(nlh);
ncm->ncm_family = AF_INET6;
if (nla_put_s32(skb, NETCONFA_IFINDEX, ifindex) < 0)
goto nla_put_failure;
rtnl/ipv6: add support of RTM_GETNETCONF This message allows to get the devconf for an interface. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:51 +00:00
/* type -1 is used for ALL */
if ((type == -1 || type == NETCONFA_FORWARDING) &&
rtnl/ipv6: use netconf msg to advertise forwarding status Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:50 +00:00
nla_put_s32(skb, NETCONFA_FORWARDING, devconf->forwarding) < 0)
goto nla_put_failure;
ipv6: Protect ->mc_forwarding access with CONFIG_IPV6_MROUTE Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 19:46:34 +00:00
#ifdef CONFIG_IPV6_MROUTE
netconf: advertise mc_forwarding status This patch advertise the MC_FORWARDING status for IPv4 and IPv6. This field is readonly, only multicast engine in the kernel updates it. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 01:13:35 +00:00
if ((type == -1 || type == NETCONFA_MC_FORWARDING) &&
nla_put_s32(skb, NETCONFA_MC_FORWARDING,
devconf->mc_forwarding) < 0)
goto nla_put_failure;
ipv6: Protect ->mc_forwarding access with CONFIG_IPV6_MROUTE Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 19:46:34 +00:00
#endif
rtnl/ipv6: use netconf msg to advertise forwarding status Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:50 +00:00
return nlmsg_end(skb, nlh);
nla_put_failure:
nlmsg_cancel(skb, nlh);
return -EMSGSIZE;
}
netconf: advertise mc_forwarding status This patch advertise the MC_FORWARDING status for IPv4 and IPv6. This field is readonly, only multicast engine in the kernel updates it. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04 01:13:35 +00:00
void inet6_netconf_notify_devconf(struct net *net, int type, int ifindex,
struct ipv6_devconf *devconf)
rtnl/ipv6: use netconf msg to advertise forwarding status Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:50 +00:00
{
struct sk_buff *skb;
int err = -ENOBUFS;
skb = nlmsg_new(inet6_netconf_msgsize_devconf(type), GFP_ATOMIC);
if (skb == NULL)
goto errout;
err = inet6_netconf_fill_devconf(skb, ifindex, devconf, 0, 0,
RTM_NEWNETCONF, 0, type);
if (err < 0) {
/* -EMSGSIZE implies BUG in inet6_netconf_msgsize_devconf() */
WARN_ON(err == -EMSGSIZE);
kfree_skb(skb);
goto errout;
}
rtnl_notify(skb, net, 0, RTNLGRP_IPV6_NETCONF, NULL, GFP_ATOMIC);
return;
errout:
ipv6: addrconf.c: remove unnecessary "if" the value of err is always negative if it goes to errout, so we don't need to check the value of err. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-18 12:08:56 +00:00
rtnl_set_sk_err(net, RTNLGRP_IPV6_NETCONF, err);
rtnl/ipv6: use netconf msg to advertise forwarding status Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:50 +00:00
}
rtnl/ipv6: add support of RTM_GETNETCONF This message allows to get the devconf for an interface. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:51 +00:00
static const struct nla_policy devconf_ipv6_policy[NETCONFA_MAX+1] = {
[NETCONFA_IFINDEX] = { .len = sizeof(int) },
[NETCONFA_FORWARDING] = { .len = sizeof(int) },
};
static int inet6_netconf_get_devconf(struct sk_buff *in_skb,
struct nlmsghdr *nlh,
void *arg)
{
struct net *net = sock_net(in_skb->sk);
struct nlattr *tb[NETCONFA_MAX+1];
struct netconfmsg *ncm;
struct sk_buff *skb;
struct ipv6_devconf *devconf;
struct inet6_dev *in6_dev;
struct net_device *dev;
int ifindex;
int err;
err = nlmsg_parse(nlh, sizeof(*ncm), tb, NETCONFA_MAX,
devconf_ipv6_policy);
if (err < 0)
goto errout;
err = EINVAL;
if (!tb[NETCONFA_IFINDEX])
goto errout;
ifindex = nla_get_s32(tb[NETCONFA_IFINDEX]);
switch (ifindex) {
case NETCONFA_IFINDEX_ALL:
devconf = net->ipv6.devconf_all;
break;
case NETCONFA_IFINDEX_DEFAULT:
devconf = net->ipv6.devconf_dflt;
break;
default:
dev = __dev_get_by_index(net, ifindex);
if (dev == NULL)
goto errout;
in6_dev = __in6_dev_get(dev);
if (in6_dev == NULL)
goto errout;
devconf = &in6_dev->cnf;
break;
}
err = -ENOBUFS;
skb = nlmsg_new(inet6_netconf_msgsize_devconf(-1), GFP_ATOMIC);
if (skb == NULL)
goto errout;
err = inet6_netconf_fill_devconf(skb, ifindex, devconf,
NETLINK_CB(in_skb).portid,
nlh->nlmsg_seq, RTM_NEWNETCONF, 0,
-1);
if (err < 0) {
/* -EMSGSIZE implies BUG in inet6_netconf_msgsize_devconf() */
WARN_ON(err == -EMSGSIZE);
kfree_skb(skb);
goto errout;
}
err = rtnl_unicast(skb, net, NETLINK_CB(in_skb).portid);
errout:
return err;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_SYSCTL
static void dev_forward_change(struct inet6_dev *idev)
{
struct net_device *dev;
struct inet6_ifaddr *ifa;
if (!idev)
return;
dev = idev->dev;
net: Disable LRO on devices that are forwarding Large Receive Offload (LRO) is only appropriate for packets that are destined for the host, and should be disabled if received packets may be forwarded. It can also confuse the GSO on output. Add dev_disable_lro() function which uses the appropriate ethtool ops to disable LRO if enabled. Add calls to dev_disable_lro() in br_add_if() and functions that enable IPv4 and IPv6 forwarding. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-19 23:15:47 +00:00
if (idev->cnf.forwarding)
dev_disable_lro(dev);
ipv6: remove a useless NULL check In dev_forward_change(), it is useless to check if idev->dev is NULL, it is always non-NULL here. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-28 17:43:53 +00:00
if (dev->flags & IFF_MULTICAST) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (idev->cnf.forwarding)
[IPV6]: Define constants for link-local multicast addresses. - Define link-local all-node / all-router multicast addresses. - Remove ipv6_addr_all_nodes() and ipv6_addr_all_routers(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:11 +00:00
ipv6_dev_mc_inc(dev, &in6addr_linklocal_allrouters);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
else
[IPV6]: Define constants for link-local multicast addresses. - Define link-local all-node / all-router multicast addresses. - Remove ipv6_addr_all_nodes() and ipv6_addr_all_routers(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:11 +00:00
ipv6_dev_mc_dec(dev, &in6addr_linklocal_allrouters);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
list_for_each_entry(ifa, &idev->addr_list, if_list) {
[IPV6]: anycast refcnt fix This patch fixes a bug in Linux IPv6 stack which caused anycast address to be added to a device prior DAD has been completed. This led to incorrect reference count which resulted in infinite wait for unregister_netdevice completion on interface removal. Signed-off-by: Michal Wrobel <xmxwx@asn.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-26 23:36:10 +00:00
if (ifa->flags&IFA_F_TENTATIVE)
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (idev->cnf.forwarding)
addrconf_join_anycast(ifa);
else
addrconf_leave_anycast(ifa);
}
rtnl/ipv6: use netconf msg to advertise forwarding status Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:50 +00:00
inet6_netconf_notify_devconf(dev_net(dev), NETCONFA_FORWARDING,
dev->ifindex, &idev->cnf);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[NETNS]: Use the per-net ipv6_devconf(_all) in sysctl handlers Actually the net->ipv6.devconf_all can be used in a few places, but to keep the /proc/sys/net/ipv6/conf/ sysctls work consistently in the namespace we should use the per-net devconf_all in the sysctl "forwarding" handler. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:43:50 +00:00
static void addrconf_forward_change(struct net *net, __s32 newf)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct net_device *dev;
struct inet6_dev *idev;
ipv6: addrconf: Avoid calling netdevice notifiers with RCU read-side lock Cong Wang reports that lockdep detected suspicious RCU usage while enabling IPV6 forwarding: [ 1123.310275] =============================== [ 1123.442202] [ INFO: suspicious RCU usage. ] [ 1123.558207] 3.6.0-rc1+ #109 Not tainted [ 1123.665204] ------------------------------- [ 1123.768254] include/linux/rcupdate.h:430 Illegal context switch in RCU read-side critical section! [ 1123.992320] [ 1123.992320] other info that might help us debug this: [ 1123.992320] [ 1124.307382] [ 1124.307382] rcu_scheduler_active = 1, debug_locks = 0 [ 1124.522220] 2 locks held by sysctl/5710: [ 1124.648364] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81768498>] rtnl_trylock+0x15/0x17 [ 1124.882211] #1: (rcu_read_lock){.+.+.+}, at: [<ffffffff81871df8>] rcu_lock_acquire+0x0/0x29 [ 1125.085209] [ 1125.085209] stack backtrace: [ 1125.332213] Pid: 5710, comm: sysctl Not tainted 3.6.0-rc1+ #109 [ 1125.441291] Call Trace: [ 1125.545281] [<ffffffff8109d915>] lockdep_rcu_suspicious+0x109/0x112 [ 1125.667212] [<ffffffff8107c240>] rcu_preempt_sleep_check+0x45/0x47 [ 1125.781838] [<ffffffff8107c260>] __might_sleep+0x1e/0x19b [...] [ 1127.445223] [<ffffffff81757ac5>] call_netdevice_notifiers+0x4a/0x4f [...] [ 1127.772188] [<ffffffff8175e125>] dev_disable_lro+0x32/0x6b [ 1127.885174] [<ffffffff81872d26>] dev_forward_change+0x30/0xcb [ 1128.013214] [<ffffffff818738c4>] addrconf_forward_change+0x85/0xc5 [...] addrconf_forward_change() uses RCU iteration over the netdev list, which is unnecessary since it already holds the RTNL lock. We also cannot reasonably require netdevice notifier functions not to sleep. Reported-by: Cong Wang <amwang@redhat.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14 08:54:51 +00:00
for_each_netdev(net, dev) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
idev = __in6_dev_get(dev);
if (idev) {
[NETNS]: Use the per-net ipv6_devconf(_all) in sysctl handlers Actually the net->ipv6.devconf_all can be used in a few places, but to keep the /proc/sys/net/ipv6/conf/ sysctls work consistently in the namespace we should use the per-net devconf_all in the sysctl "forwarding" handler. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:43:50 +00:00
int changed = (!idev->cnf.forwarding) ^ (!newf);
idev->cnf.forwarding = newf;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (changed)
dev_forward_change(idev);
}
}
}
[IPV6]: Eliminate difference in actions of sysctl and proc handler for conf.all.forwarding The only difference in this case is that updating all.forwarding causes the update in default.forwarding when done via proc, but not via the system call. Besides, this consolidates a good portion of code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-05 09:50:24 +00:00
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int newf)
[IPV6]: Eliminate difference in actions of sysctl and proc handler for conf.all.forwarding The only difference in this case is that updating all.forwarding causes the update in default.forwarding when done via proc, but not via the system call. Besides, this consolidates a good portion of code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-05 09:50:24 +00:00
{
[NETNS]: Make the ctl-tables per-namespace This includes passing the net to __addrconf_sysctl_register and saving this on the ctl_table->extra2 to be used in handlers (those, needing it). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:13 +00:00
struct net *net;
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
int old;
if (!rtnl_trylock())
return restart_syscall();
[NETNS]: Make the ctl-tables per-namespace This includes passing the net to __addrconf_sysctl_register and saving this on the ctl_table->extra2 to be used in handlers (those, needing it). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:13 +00:00
net = (struct net *)table->extra2;
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
old = *p;
*p = newf;
ipv6: Fix sysctl unregistration deadlock Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 06:55:31 +00:00
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
if (p == &net->ipv6.devconf_dflt->forwarding) {
rtnl/ipv6: use netconf msg to advertise forwarding status Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:50 +00:00
if ((!newf) ^ (!old))
inet6_netconf_notify_devconf(net, NETCONFA_FORWARDING,
NETCONFA_IFINDEX_DEFAULT,
net->ipv6.devconf_dflt);
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
rtnl_unlock();
return 0;
net: Fix sysctl restarts... Yuck. It turns out that when we restart sysctls we were restarting with the values already changed. Which unfortunately meant that the second time through we thought there was no change and skipped all kinds of work, despite the fact that there was indeed a change. I have fixed this the simplest way possible by restoring the changed values when we restart the sysctl write. One of my coworkers spotted this bug when after disabling forwarding on an interface pings were still forwarded. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19 13:22:59 +00:00
}
[IPV6]: Eliminate difference in actions of sysctl and proc handler for conf.all.forwarding The only difference in this case is that updating all.forwarding causes the update in default.forwarding when done via proc, but not via the system call. Besides, this consolidates a good portion of code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-05 09:50:24 +00:00
[NETNS]: Use the per-net ipv6_devconf(_all) in sysctl handlers Actually the net->ipv6.devconf_all can be used in a few places, but to keep the /proc/sys/net/ipv6/conf/ sysctls work consistently in the namespace we should use the per-net devconf_all in the sysctl "forwarding" handler. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:43:50 +00:00
if (p == &net->ipv6.devconf_all->forwarding) {
net->ipv6.devconf_dflt->forwarding = newf;
addrconf_forward_change(net, newf);
rtnl/ipv6: use netconf msg to advertise forwarding status Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:50 +00:00
if ((!newf) ^ (!old))
inet6_netconf_notify_devconf(net, NETCONFA_FORWARDING,
NETCONFA_IFINDEX_ALL,
net->ipv6.devconf_all);
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
} else if ((!newf) ^ (!old))
[IPV6]: Eliminate difference in actions of sysctl and proc handler for conf.all.forwarding The only difference in this case is that updating all.forwarding causes the update in default.forwarding when done via proc, but not via the system call. Besides, this consolidates a good portion of code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-05 09:50:24 +00:00
dev_forward_change((struct inet6_dev *)table->extra1);
net: Disable LRO on devices that are forwarding Large Receive Offload (LRO) is only appropriate for packets that are destined for the host, and should be disabled if received packets may be forwarded. It can also confuse the GSO on output. Add dev_disable_lro() function which uses the appropriate ethtool ops to disable LRO if enabled. Add calls to dev_disable_lro() in br_add_if() and functions that enable IPv4 and IPv6 forwarding. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-19 23:15:47 +00:00
rtnl_unlock();
[IPV6]: Eliminate difference in actions of sysctl and proc handler for conf.all.forwarding The only difference in this case is that updating all.forwarding causes the update in default.forwarding when done via proc, but not via the system call. Besides, this consolidates a good portion of code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-05 09:50:24 +00:00
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
if (newf)
[NETNS][IPV6] route6 - Pass the network namespace parameter to rt6_purge_dflt_routers Add a network namespace parameter to rt6_purge_dflt_routers. This is needed to call fib6_get_table with the appropriate network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04 21:47:14 +00:00
rt6_purge_dflt_routers(net);
ipv6: Fix sysctl unregistration deadlock Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 06:55:31 +00:00
return 1;
[IPV6]: Eliminate difference in actions of sysctl and proc handler for conf.all.forwarding The only difference in this case is that updating all.forwarding causes the update in default.forwarding when done via proc, but not via the system call. Besides, this consolidates a good portion of code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-05 09:50:24 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
/* Nobody refers to this ifaddr, destroy it */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void inet6_ifa_finish_destroy(struct inet6_ifaddr *ifp)
{
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
WARN_ON(!hlist_unhashed(&ifp->addr_lst));
net: convert BUG_TRAP to generic WARN_ON Removes legacy reinvent-the-wheel type thing. The generic machinery integrates much better to automated debugging aids such as kerneloops.org (and others), and is unambiguous due to better naming. Non-intuively BUG_TRAP() is actually equal to WARN_ON() rather than BUG_ON() though some might actually be promoted to BUG_ON() but I left that to future. I could make at least one BUILD_BUG_ON conversion. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-26 04:43:18 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef NET_REFCNT_DEBUG
net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debug Use the current debugging style and enable dynamic_debug. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:54 +00:00
pr_debug("%s\n", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
in6_dev_put(ifp->idev);
if (del_timer(&ifp->timer))
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
pr_notice("Timer is still running, when freeing ifa=%p\n", ifp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6: Replace inet6_ifaddr->dead with state This patch replaces the boolean dead flag on inet6_ifaddr with a state enum. This allows us to roll back changes when deleting an address according to whether DAD has completed or not. This patch only adds the state field and does not change the logic. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:36:06 +00:00
if (ifp->state != INET6_IFADDR_STATE_DEAD) {
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
pr_warn("Freeing alive inet6 address %p\n", ifp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return;
}
ipv6: introduce ip6_rt_put() As suggested by Eric, we could introduce a helper function for ipv6 too, to avoid checking if rt is NULL before dst_release(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29 00:13:19 +00:00
ip6_rt_put(ifp->rt);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
net,rcu: convert call_rcu(inet6_ifa_finish_destroy_rcu) to kfree_rcu() The rcu callback inet6_ifa_finish_destroy_rcu() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(inet6_ifa_finish_destroy_rcu). Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-03-15 10:00:14 +00:00
kfree_rcu(ifp, rcu);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6]: order addresses by scope If IPv6 addresses are ordered by scope, then ipv6_dev_get_saddr() can break-out of the device addr_list for() loop when the candidate source address scope is less than the destination address scope. Signed-off-by: Brian Haley <brian.haley@hp.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-10 22:25:51 +00:00
static void
ipv6_link_dev_addr(struct inet6_dev *idev, struct inet6_ifaddr *ifp)
{
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
struct list_head *p;
[IPV6]: Use ipv6_addr_src_scope for link address sorting. In the source address selection, the address must be sorted from global to node-local. But, ifp->scope is different from the scope for source address selection. 2001::1 fe80::1 ::1 ifp->scope 0 0x02 0x01 ipv6_addr_src_scope(&ifp->addr) 0x0e 0x02 0x01 So, we need to use ipv6_addr_src_scope(&ifp->addr) for sorting. And, for backward compatibility, addresses should be sorted from new one to old one. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-11 20:05:30 +00:00
int ifp_scope = ipv6_addr_src_scope(&ifp->addr);
[IPV6]: order addresses by scope If IPv6 addresses are ordered by scope, then ipv6_dev_get_saddr() can break-out of the device addr_list for() loop when the candidate source address scope is less than the destination address scope. Signed-off-by: Brian Haley <brian.haley@hp.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-10 22:25:51 +00:00
/*
* Each device address list is sorted in order of scope -
* global before linklocal.
*/
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
list_for_each(p, &idev->addr_list) {
struct inet6_ifaddr *ifa
= list_entry(p, struct inet6_ifaddr, if_list);
[IPV6]: Use ipv6_addr_src_scope for link address sorting. In the source address selection, the address must be sorted from global to node-local. But, ifp->scope is different from the scope for source address selection. 2001::1 fe80::1 ::1 ifp->scope 0 0x02 0x01 ipv6_addr_src_scope(&ifp->addr) 0x0e 0x02 0x01 So, we need to use ipv6_addr_src_scope(&ifp->addr) for sorting. And, for backward compatibility, addresses should be sorted from new one to old one. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-11 20:05:30 +00:00
if (ifp_scope >= ipv6_addr_src_scope(&ifa->addr))
[IPV6]: order addresses by scope If IPv6 addresses are ordered by scope, then ipv6_dev_get_saddr() can break-out of the device addr_list for() loop when the candidate source address scope is less than the destination address scope. Signed-off-by: Brian Haley <brian.haley@hp.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-10 22:25:51 +00:00
break;
}
ipv6: Preserve pervious behavior in ipv6_link_dev_addr(). Use list_add_tail() to get the behavior we had before the list_head conversion for ipv6 address lists. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26 04:25:30 +00:00
list_add_tail(&ifp->if_list, p);
[IPV6]: order addresses by scope If IPv6 addresses are ordered by scope, then ipv6_dev_get_saddr() can break-out of the device addr_list for() loop when the candidate source address scope is less than the destination address scope. Signed-off-by: Brian Haley <brian.haley@hp.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-10 22:25:51 +00:00
}
ipv6: add ipv6_addr_hash() helper Introduce ipv6_addr_hash() helper doing a XOR on all bits of an IPv6 address, with an optimized x86_64 version. Use it in flow dissector, as suggested by Andrew McGregor, to reduce hash collision probabilities in fq_codel (and other users of flow dissector) Use it in ip6_tunnel.c and use more bit shuffling, as suggested by David Laight, as existing hash was ignoring most of them. Use it in sunrpc and use more bit shuffling, using hash_32(). Use it in net/ipv6/addrconf.c, using hash_32() as well. As a cleanup, use it in net/ipv4/tcp_metrics.c Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrew McGregor <andrewmcgr@gmail.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Tom Herbert <therbert@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18 08:11:12 +00:00
static u32 inet6_addr_hash(const struct in6_addr *addr)
[IPV6] ADDRCONF: Uninline ipv6_addr_hash(). The function is only used in net/ipv6/addrconf.c. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:08 +00:00
{
ipv6: add ipv6_addr_hash() helper Introduce ipv6_addr_hash() helper doing a XOR on all bits of an IPv6 address, with an optimized x86_64 version. Use it in flow dissector, as suggested by Andrew McGregor, to reduce hash collision probabilities in fq_codel (and other users of flow dissector) Use it in ip6_tunnel.c and use more bit shuffling, as suggested by David Laight, as existing hash was ignoring most of them. Use it in sunrpc and use more bit shuffling, using hash_32(). Use it in net/ipv6/addrconf.c, using hash_32() as well. As a cleanup, use it in net/ipv4/tcp_metrics.c Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrew McGregor <andrewmcgr@gmail.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Tom Herbert <therbert@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18 08:11:12 +00:00
return hash_32(ipv6_addr_hash(addr), IN6_ADDR_HSIZE_SHIFT);
[IPV6] ADDRCONF: Uninline ipv6_addr_hash(). The function is only used in net/ipv6/addrconf.c. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:08 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* On success it returns ifp with increased reference count */
static struct inet6_ifaddr *
ipv6_add_addr(struct inet6_dev *idev, const struct in6_addr *addr, int pfxlen,
[NETLINK]: Explicit typing This patch converts "unsigned flags" to use more explict types like u16 instead and incrementally introduces NLMSG_NEW(). Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-19 05:55:31 +00:00
int scope, u32 flags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct inet6_ifaddr *ifa = NULL;
struct rt6_info *rt;
ipv6: user better hash for addrconf The existing hash function has a couple of issues: * it is hardwired to 16 for IN6_ADDR_HSIZE * limited to 256 and callers using int * use jhash2 rather than some old BSD algorithm No need for random seed since this is local only (based on assigned addresses) table. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:12 +00:00
unsigned int hash;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int err = 0;
ipv6: Do not assign non-valid address on interface. Check the type of the address when adding a new one on interface. - the unspecified address (::) is always disallowed (RFC4291 2.5.2) - the loopback address is disallowed unless the interface is (one of) loopback (RFC4291 2.5.3). - multicast addresses are disallowed. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-25 07:26:47 +00:00
int addr_type = ipv6_addr_type(addr);
if (addr_type == IPV6_ADDR_ANY ||
addr_type & IPV6_ADDR_MULTICAST ||
(!(idev->dev->flags & IFF_LOOPBACK) &&
addr_type & IPV6_ADDR_LOOPBACK))
return ERR_PTR(-EADDRNOTAVAIL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6] ADDRCONF: Convert addrconf_lock to RCU. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:44:24 +00:00
rcu_read_lock_bh();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (idev->dead) {
err = -ENODEV; /*XXX*/
goto out2;
}
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
if (idev->cnf.disable_ipv6) {
ipv6: Fix incorrect disable_ipv6 behavior Fix the behavior of allowing both sysctl and addrconf_dad_failure() to set the disable_ipv6 parameter without any bad side-effects. If DAD fails and accept_dad > 1, we will still set disable_ipv6=1, but then instead of allowing an RA to add an address then immediately fail DAD, we simply don't allow the address to be added in the first place. This also lets the user set this flag and disable all IPv6 addresses on the interface, or on the entire system. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-19 01:22:48 +00:00
err = -EACCES;
goto out2;
}
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
spin_lock(&addrconf_hash_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Ignore adding duplicate addresses on an interface */
[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS. Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 12:47:49 +00:00
if (ipv6_chk_same_addr(dev_net(idev->dev), addr, idev->dev)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ADBG(("ipv6_add_addr: already assigned\n"));
err = -EEXIST;
goto out;
}
[IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2 Here are some possible (and trivial) cleanups. - use kzalloc() where possible - invert allocation failure test like if (object) { /* Rest of function here */ } to if (object == NULL) return NULL; /* Rest of function here */ Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 07:01:47 +00:00
ifa = kzalloc(sizeof(struct inet6_ifaddr), GFP_ATOMIC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (ifa == NULL) {
ADBG(("ipv6_add_addr: malloc failed\n"));
err = -ENOBUFS;
goto out;
}
ipv6: Make third arg to anycast_dst_alloc() bool. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06 21:48:14 +00:00
rt = addrconf_dst_alloc(idev, addr, false);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (IS_ERR(rt)) {
err = PTR_ERR(rt);
goto out;
}
net: remove ipv6_addr_copy() C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21 03:39:03 +00:00
ifa->addr = *addr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_lock_init(&ifa->lock);
ipv6: Replace inet6_ifaddr->dead with state This patch replaces the boolean dead flag on inet6_ifaddr with a state enum. This allows us to roll back changes when deleting an address according to whether DAD has completed or not. This patch only adds the state field and does not change the logic. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:36:06 +00:00
spin_lock_init(&ifa->state_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
init_timer(&ifa->timer);
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
INIT_HLIST_NODE(&ifa->addr_lst);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ifa->timer.data = (unsigned long) ifa;
ifa->scope = scope;
ifa->prefix_len = pfxlen;
ifa->flags = flags | IFA_F_TENTATIVE;
ifa->cstamp = ifa->tstamp = jiffies;
[IPV6]: ipv6_add_addr should install dstentry earlier ipv6_add_addr allocates a struct inet6_ifaddr and a dstentry, but it doesn't install the dstentry in ifa->rt until after it releases the addrconf_hash_lock. This means other CPUs will be able to see the new address while it hasn't been initialized completely yet. One possible fix would be to grab the ifp->lock spinlock when creating the address struct; a simpler fix is to just move the assignment. Acked-by: jbeulich@novell.com Acked-by: okir@suse.de Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-29 09:43:49 +00:00
ifa->rt = rt;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ifa->idev = idev;
in6_dev_hold(idev);
/* For caller */
in6_ifa_hold(ifa);
/* Add to big hash table */
ipv6: add ipv6_addr_hash() helper Introduce ipv6_addr_hash() helper doing a XOR on all bits of an IPv6 address, with an optimized x86_64 version. Use it in flow dissector, as suggested by Andrew McGregor, to reduce hash collision probabilities in fq_codel (and other users of flow dissector) Use it in ip6_tunnel.c and use more bit shuffling, as suggested by David Laight, as existing hash was ignoring most of them. Use it in sunrpc and use more bit shuffling, using hash_32(). Use it in net/ipv6/addrconf.c, using hash_32() as well. As a cleanup, use it in net/ipv4/tcp_metrics.c Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrew McGregor <andrewmcgr@gmail.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Tom Herbert <therbert@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18 08:11:12 +00:00
hash = inet6_addr_hash(addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
hlist_add_head_rcu(&ifa->addr_lst, &inet6_addr_lst[hash]);
spin_unlock(&addrconf_hash_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
write_lock(&idev->lock);
/* Add to inet6_dev unicast addr list. */
[IPV6]: order addresses by scope If IPv6 addresses are ordered by scope, then ipv6_dev_get_saddr() can break-out of the device addr_list for() loop when the candidate source address scope is less than the destination address scope. Signed-off-by: Brian Haley <brian.haley@hp.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-10 22:25:51 +00:00
ipv6_link_dev_addr(idev, ifa);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_IPV6_PRIVACY
if (ifa->flags&IFA_F_TEMPORARY) {
ipv6: convert temporary address list to list macros Use list macros instead of open coded linked list. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:09 +00:00
list_add(&ifa->tmp_list, &idev->tempaddr_list);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_ifa_hold(ifa);
}
#endif
in6_ifa_hold(ifa);
write_unlock(&idev->lock);
out2:
[IPV6] ADDRCONF: Convert addrconf_lock to RCU. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:44:24 +00:00
rcu_read_unlock_bh();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6]: Fix a branch prediction From: Tushar Gohad <tgohad@mvista.com> Signed-off-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-20 05:27:09 +00:00
if (likely(err == 0))
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 09:16:30 +00:00
atomic_notifier_call_chain(&inet6addr_chain, NETDEV_UP, ifa);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
else {
kfree(ifa);
ifa = ERR_PTR(err);
}
return ifa;
out:
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
spin_unlock(&addrconf_hash_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto out2;
}
/* This function wants to get referenced ifp and releases it before return */
static void ipv6_del_addr(struct inet6_ifaddr *ifp)
{
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
struct inet6_ifaddr *ifa, *ifn;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct inet6_dev *idev = ifp->idev;
ipv6: Use state_lock to protect ifa state This patch makes use of the new state_lock to synchronise between updates to the ifa state. This fixes the issue where a remotely triggered address deletion (through DAD failure) coincides with a local administrative address deletion, causing certain actions to be performed twice incorrectly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:54:18 +00:00
int state;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int deleted = 0, onlink = 0;
unsigned long expires = jiffies;
ipv6: Use state_lock to protect ifa state This patch makes use of the new state_lock to synchronise between updates to the ifa state. This fixes the issue where a remotely triggered address deletion (through DAD failure) coincides with a local administrative address deletion, causing certain actions to be performed twice incorrectly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:54:18 +00:00
spin_lock_bh(&ifp->state_lock);
state = ifp->state;
ipv6: Replace inet6_ifaddr->dead with state This patch replaces the boolean dead flag on inet6_ifaddr with a state enum. This allows us to roll back changes when deleting an address according to whether DAD has completed or not. This patch only adds the state field and does not change the logic. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:36:06 +00:00
ifp->state = INET6_IFADDR_STATE_DEAD;
ipv6: Use state_lock to protect ifa state This patch makes use of the new state_lock to synchronise between updates to the ifa state. This fixes the issue where a remotely triggered address deletion (through DAD failure) coincides with a local administrative address deletion, causing certain actions to be performed twice incorrectly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:54:18 +00:00
spin_unlock_bh(&ifp->state_lock);
if (state == INET6_IFADDR_STATE_DEAD)
goto out;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
spin_lock_bh(&addrconf_hash_lock);
hlist_del_init_rcu(&ifp->addr_lst);
spin_unlock_bh(&addrconf_hash_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
write_lock_bh(&idev->lock);
#ifdef CONFIG_IPV6_PRIVACY
if (ifp->flags&IFA_F_TEMPORARY) {
ipv6: convert temporary address list to list macros Use list macros instead of open coded linked list. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:09 +00:00
list_del(&ifp->tmp_list);
if (ifp->ifpub) {
in6_ifa_put(ifp->ifpub);
ifp->ifpub = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv6: convert temporary address list to list macros Use list macros instead of open coded linked list. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:09 +00:00
__in6_ifa_put(ifp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#endif
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
list_for_each_entry_safe(ifa, ifn, &idev->addr_list, if_list) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (ifa == ifp) {
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
list_del_init(&ifp->if_list);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
__in6_ifa_put(ifp);
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!(ifp->flags & IFA_F_PERMANENT) || onlink > 0)
break;
deleted = 1;
[IPV6]: Fix address deletion If you add more than one IPv6 address belonging to the same prefix and delete the address that was last added, routing table entry for that prefix is also deleted. Tested on 2.6.14.4 To reproduce: ip addr add 3ffe::1/64 dev eth0 ip addr add 3ffe::2/64 dev eth0 /* wait DAD */ sleep 1 ip addr del 3ffe::2/64 dev eth0 ip -6 route (route to 3ffe::/64 should be gone) In ipv6_del_addr(), if ifa == ifp, we set ifa->if_next to NULL, and later assign ifap = &ifa->if_next, effectively terminating the for-loop. This prevents us from checking if there are other addresses using the same prefix that are valid, and thus resulting in deletion of the prefix. This applies only if the first entry in idev->addr_list is the address to be deleted. Signed-off-by: Kristian Slavov <kristian.slavov@nomadiclab.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-22 02:47:24 +00:00
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
} else if (ifp->flags & IFA_F_PERMANENT) {
if (ipv6_prefix_equal(&ifa->addr, &ifp->addr,
ifp->prefix_len)) {
if (ifa->flags & IFA_F_PERMANENT) {
onlink = 1;
if (deleted)
break;
} else {
unsigned long lifetime;
if (!onlink)
onlink = -1;
spin_lock(&ifa->lock);
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 08:37:49 +00:00
lifetime = addrconf_timeout_fixup(ifa->valid_lft, HZ);
/*
* Note: Because this address is
* not permanent, lifetime <
* LONG_MAX / HZ here.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (time_before(expires,
ifa->tstamp + lifetime * HZ))
expires = ifa->tstamp + lifetime * HZ;
spin_unlock(&ifa->lock);
}
}
}
}
write_unlock_bh(&idev->lock);
ipv6: fix race between ipv6_del_addr and DAD timer Consider the following scenario: ipv6_del_addr(ifp) ipv6_ifa_notify(RTM_DELADDR, ifp) ip6_del_rt(ifp->rt) after returning from the ipv6_ifa_notify and enabling BH-s back, but *before* calling the addrconf_del_timer the ifp->timer fires and: addrconf_dad_timer(ifp) addrconf_dad_completed(ifp) ipv6_ifa_notify(RTM_NEWADDR, ifp) ip6_ins_rt(ifp->rt) then return back to the ipv6_del_addr and: in6_ifa_put(ifp) inet6_ifa_finish_destroy(ifp) dst_release(&ifp->rt->u.dst) After this we have an ifp->rt inserted into fib6 lists, but queued for gc, which in turn can result in oopses in the fib6_run_gc. Maybe some other nasty things, but we caught only the oops in gc so far. The solution is to disarm the ifp->timer before flushing the rt from it. Signed-off-by: Andrey Vagin <avagin@parallels.com> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08 22:13:31 +00:00
addrconf_del_timer(ifp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6_ifa_notify(RTM_DELADDR, ifp);
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 09:16:30 +00:00
atomic_notifier_call_chain(&inet6addr_chain, NETDEV_DOWN, ifp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Purge or update corresponding prefix
*
* 1) we don't purge prefix here if address was not permanent.
* prefix is managed by its own lifetime.
* 2) if there're no addresses, delete prefix.
* 3) if there're still other permanent address(es),
* corresponding prefix is still permanent.
* 4) otherwise, update prefix lifetime to the
* longest valid lifetime among the corresponding
* addresses on the device.
* Note: subsequent RA will update lifetime.
*
* --yoshfuji
*/
if ((ifp->flags & IFA_F_PERMANENT) && onlink < 1) {
struct in6_addr prefix;
struct rt6_info *rt;
ipv6: del unreachable route when an addr is deleted on lo When an address is added on loopback (ip -6 a a 2002::1/128 dev lo), two routes are added: - one in the local table: local 2002::1 via :: dev lo proto none metric 0 - one the in main table (for the prefix): unreachable 2002::1 dev lo proto kernel metric 256 error -101 When the address is deleted, the route inserted in the main table remains because we use rt6_lookup(), which returns NULL when dst->error is set, which is the case here! Thus, it is better to use ip6_route_lookup() to avoid this kind of filter. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-26 00:04:55 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6_addr_prefix(&prefix, &ifp->addr, ifp->prefix_len);
ipv6: use addrconf_get_prefix_route for prefix route lookup [v2] Replace ip6_route_lookup() with addrconf_get_prefix_route() when looking up for a prefix route. This ensures that the connected prefix is looked up in the main table, and avoids the selection of other matching routes located in different tables as well as blackhole or prohibited entries. In addition, this fixes an Opps introduced by commit 64c6d08e (ipv6: del unreachable route when an addr is deleted on lo), that would occur when a blackhole or prohibited entry is selected by ip6_route_lookup(). Such entries have a NULL rt6i_table argument, which is accessed by __ip6_del_rt() when trying to lock rt6i_table->tb6_lock. The function addrconf_is_prefix_route() is not used anymore and is removed. [v2] Minor indentation cleanup and log updates. Signed-off-by: Romain Kuntz <r.kuntz@ipflavors.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-09 21:06:03 +00:00
rt = addrconf_get_prefix_route(&prefix,
ifp->prefix_len,
ifp->idev->dev,
0, RTF_GATEWAY | RTF_DEFAULT);
if (rt) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (onlink == 0) {
[IPv6] route: Simplify ip6_del_rt() Provide a simple ip6_del_rt() for the majority of users and an alternative for the exception via netlink. Avoids code obfuscation. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-22 07:00:21 +00:00
ip6_del_rt(rt);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
rt = NULL;
} else if (!(rt->rt6i_flags & RTF_EXPIRES)) {
ipv6: fix problem with expired dst cache If the ipv6 dst cache which copy from the dst generated by ICMPV6 RA packet. this dst cache will not check expire because it has no RTF_EXPIRES flag. So this dst cache will always be used until the dst gc run. Change the struct dst_entry,add a union contains new pointer from and expires. When rt6_info.rt6i_flags has no RTF_EXPIRES flag,the dst.expires has no use. we can use this field to point to where the dst cache copy from. The dst.from is only used in IPV6. rt6_check_expired check if rt6_info.dst.from is expired. ip6_rt_copy only set dst.from when the ort has flag RTF_ADDRCONF and RTF_DEFAULT.then hold the ort. ip6_dst_destroy release the ort. Add some functions to operate the RTF_EXPIRES flag and expires(from) together. and change the code to use these new adding functions. Changes from v5: modify ip6_route_add and ndisc_router_discovery to use new adding functions. Only set dst.from when the ort has flag RTF_ADDRCONF and RTF_DEFAULT.then hold the ort. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-06 00:13:10 +00:00
rt6_set_expires(rt, expires);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
ipv6: introduce ip6_rt_put() As suggested by Eric, we could introduce a helper function for ipv6 too, to avoid checking if rt is NULL before dst_release(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29 00:13:19 +00:00
ip6_rt_put(rt);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv6: RTA_PREFSRC support for ipv6 route source address selection [ipv6] Add support for RTA_PREFSRC This patch allows a user to select the preferred source address for a specific IPv6-Route. It can be set via a netlink message setting RTA_PREFSRC to a valid IPv6 address which must be up on the device the route will be bound to. Signed-off-by: Daniel Walter <dwalter@barracuda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13 21:10:57 +00:00
/* clean up prefsrc entries */
rt6_remove_prefsrc(ifp);
ipv6: Use state_lock to protect ifa state This patch makes use of the new state_lock to synchronise between updates to the ifa state. This fixes the issue where a remotely triggered address deletion (through DAD failure) coincides with a local administrative address deletion, causing certain actions to be performed twice incorrectly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:54:18 +00:00
out:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_ifa_put(ifp);
}
#ifdef CONFIG_IPV6_PRIVACY
static int ipv6_create_tempaddr(struct inet6_ifaddr *ifp, struct inet6_ifaddr *ift)
{
struct inet6_dev *idev = ifp->idev;
struct in6_addr addr, *tmpaddr;
ipv6: updates to privacy addresses per RFC 4941. Update the code to handle some of the differences between RFC 3041 and RFC 4941, which obsoletes it. Also a couple of janitorial fixes. - Allow router advertisements to increase the lifetime of temporary addresses. This was not allowed by RFC 3041, but is specified by RFC 4941. It is useful when RA lifetimes are lower than TEMP_{VALID,PREFERRED}_LIFETIME: in this case, the previous code would delete or deprecate addresses prematurely. - Change the default of MAX_RETRY to 3 per RFC 4941. - Add a comment to clarify that the preferred and valid lifetimes in inet6_ifaddr are relative to the timestamp. - Shorten lines to 80 characters in a couple of places. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26 13:50:49 +00:00
unsigned long tmp_prefered_lft, tmp_valid_lft, tmp_tstamp, age;
IPv6: do not create temporary adresses with too short preferred lifetime From RFC341: A temporary address is created only if this calculated Preferred Lifetime is greater than REGEN_ADVANCE time units. In particular, an implementation must not create a temporary address with a zero Preferred Lifetime. Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02 07:01:35 +00:00
unsigned long regen_advance;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int tmp_plen;
int ret = 0;
int max_addresses;
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
u32 addr_flags;
ipv6: updates to privacy addresses per RFC 4941. Update the code to handle some of the differences between RFC 3041 and RFC 4941, which obsoletes it. Also a couple of janitorial fixes. - Allow router advertisements to increase the lifetime of temporary addresses. This was not allowed by RFC 3041, but is specified by RFC 4941. It is useful when RA lifetimes are lower than TEMP_{VALID,PREFERRED}_LIFETIME: in this case, the previous code would delete or deprecate addresses prematurely. - Change the default of MAX_RETRY to 3 per RFC 4941. - Add a comment to clarify that the preferred and valid lifetimes in inet6_ifaddr are relative to the timestamp. - Shorten lines to 80 characters in a couple of places. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26 13:50:49 +00:00
unsigned long now = jiffies;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
write_lock(&idev->lock);
if (ift) {
spin_lock_bh(&ift->lock);
memcpy(&addr.s6_addr[8], &ift->addr.s6_addr[8], 8);
spin_unlock_bh(&ift->lock);
tmpaddr = &addr;
} else {
tmpaddr = NULL;
}
retry:
in6_dev_hold(idev);
if (idev->cnf.use_tempaddr <= 0) {
write_unlock(&idev->lock);
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
pr_info("%s: use_tempaddr is disabled\n", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_dev_put(idev);
ret = -1;
goto out;
}
spin_lock_bh(&ifp->lock);
if (ifp->regen_count++ >= idev->cnf.regen_max_retry) {
idev->cnf.use_tempaddr = -1; /*XXX*/
spin_unlock_bh(&ifp->lock);
write_unlock(&idev->lock);
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
pr_warn("%s: regeneration time exceeded - disabled temporary address support\n",
__func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_dev_put(idev);
ret = -1;
goto out;
}
in6_ifa_hold(ifp);
memcpy(addr.s6_addr, ifp->addr.s6_addr, 8);
ipv6: remove some deadcode __ipv6_regen_rndid no longer returns anything other than 0 so there's no point in verifying what it returns Signed-off-by: Sorin Dumitru <sdumitru@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30 02:01:45 +00:00
__ipv6_try_regen_rndid(idev, tmpaddr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
memcpy(&addr.s6_addr[8], idev->rndid, 8);
ipv6: updates to privacy addresses per RFC 4941. Update the code to handle some of the differences between RFC 3041 and RFC 4941, which obsoletes it. Also a couple of janitorial fixes. - Allow router advertisements to increase the lifetime of temporary addresses. This was not allowed by RFC 3041, but is specified by RFC 4941. It is useful when RA lifetimes are lower than TEMP_{VALID,PREFERRED}_LIFETIME: in this case, the previous code would delete or deprecate addresses prematurely. - Change the default of MAX_RETRY to 3 per RFC 4941. - Add a comment to clarify that the preferred and valid lifetimes in inet6_ifaddr are relative to the timestamp. - Shorten lines to 80 characters in a couple of places. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26 13:50:49 +00:00
age = (now - ifp->tstamp) / HZ;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
tmp_valid_lft = min_t(__u32,
ifp->valid_lft,
IPv6: Temp addresses are immediately deleted. There is a bug in the interaction between ipv6_create_tempaddr and addrconf_verify. Because ipv6_create_tempaddr uses the cstamp and tstamp from the public address in creating a private address, if we have not received a router advertisement in a while, tstamp + temp_valid_lft might be < now. If this happens, the new address is created inside ipv6_create_tempaddr, then the loop within addrconf_verify starts again and the address is immediately deleted. We are left with no temporary addresses on the interface, and no more will be created until the public IP address is updated. To avoid this, set the expiry time to be the minimum of the time left on the public address or the config option PLUS the current age of the public interface. Signed-off-by: Glenn Wurster <gwurster@scs.carleton.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27 07:10:10 +00:00
idev->cnf.temp_valid_lft + age);
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
tmp_prefered_lft = min_t(__u32,
ifp->prefered_lft,
IPv6: Temp addresses are immediately deleted. There is a bug in the interaction between ipv6_create_tempaddr and addrconf_verify. Because ipv6_create_tempaddr uses the cstamp and tstamp from the public address in creating a private address, if we have not received a router advertisement in a while, tstamp + temp_valid_lft might be < now. If this happens, the new address is created inside ipv6_create_tempaddr, then the loop within addrconf_verify starts again and the address is immediately deleted. We are left with no temporary addresses on the interface, and no more will be created until the public IP address is updated. To avoid this, set the expiry time to be the minimum of the time left on the public address or the config option PLUS the current age of the public interface. Signed-off-by: Glenn Wurster <gwurster@scs.carleton.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27 07:10:10 +00:00
idev->cnf.temp_prefered_lft + age -
ipv6: Use interface max_desync_factor instead of static default max_desync_factor can be configured per-interface, but nothing is using the value. Reported-by: Piotr Lewandowski <piotr.lewandowski@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-26 11:42:55 +00:00
idev->cnf.max_desync_factor);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
tmp_plen = ifp->prefix_len;
max_addresses = idev->cnf.max_addresses;
tmp_tstamp = ifp->tstamp;
spin_unlock_bh(&ifp->lock);
IPv6: do not create temporary adresses with too short preferred lifetime From RFC341: A temporary address is created only if this calculated Preferred Lifetime is greater than REGEN_ADVANCE time units. In particular, an implementation must not create a temporary address with a zero Preferred Lifetime. Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02 07:01:35 +00:00
regen_advance = idev->cnf.regen_max_retry *
idev->cnf.dad_transmits *
idev->nd_parms->retrans_time / HZ;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
write_unlock(&idev->lock);
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
IPv6: do not create temporary adresses with too short preferred lifetime From RFC341: A temporary address is created only if this calculated Preferred Lifetime is greater than REGEN_ADVANCE time units. In particular, an implementation must not create a temporary address with a zero Preferred Lifetime. Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02 07:01:35 +00:00
/* A temporary address is created only if this calculated Preferred
* Lifetime is greater than REGEN_ADVANCE time units. In particular,
* an implementation must not create a temporary address with a zero
* Preferred Lifetime.
*/
if (tmp_prefered_lft <= regen_advance) {
in6_ifa_put(ifp);
in6_dev_put(idev);
ret = -1;
goto out;
}
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
addr_flags = IFA_F_TEMPORARY;
/* set in addrconf_prefix_rcv() */
if (ifp->flags & IFA_F_OPTIMISTIC)
addr_flags |= IFA_F_OPTIMISTIC;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ift = !max_addresses ||
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
ipv6_count_addresses(idev) < max_addresses ?
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6_add_addr(idev, &addr, tmp_plen,
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
ipv6_addr_type(&addr)&IPV6_ADDR_SCOPE_MASK,
addr_flags) : NULL;
ipv6: Use IS_ERR_OR_NULL(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-22 06:32:54 +00:00
if (IS_ERR_OR_NULL(ift)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_ifa_put(ifp);
in6_dev_put(idev);
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
pr_info("%s: retry temporary address regeneration\n", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
tmpaddr = &addr;
write_lock(&idev->lock);
goto retry;
}
spin_lock_bh(&ift->lock);
ift->ifpub = ifp;
ift->valid_lft = tmp_valid_lft;
ift->prefered_lft = tmp_prefered_lft;
ipv6: updates to privacy addresses per RFC 4941. Update the code to handle some of the differences between RFC 3041 and RFC 4941, which obsoletes it. Also a couple of janitorial fixes. - Allow router advertisements to increase the lifetime of temporary addresses. This was not allowed by RFC 3041, but is specified by RFC 4941. It is useful when RA lifetimes are lower than TEMP_{VALID,PREFERRED}_LIFETIME: in this case, the previous code would delete or deprecate addresses prematurely. - Change the default of MAX_RETRY to 3 per RFC 4941. - Add a comment to clarify that the preferred and valid lifetimes in inet6_ifaddr are relative to the timestamp. - Shorten lines to 80 characters in a couple of places. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26 13:50:49 +00:00
ift->cstamp = now;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ift->tstamp = tmp_tstamp;
spin_unlock_bh(&ift->lock);
ipv6: Remove unused argument to addrconf_dad_start(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 01:37:40 +00:00
addrconf_dad_start(ift);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_ifa_put(ift);
in6_dev_put(idev);
out:
return ret;
}
#endif
/*
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
* Choose an appropriate source address (RFC3484)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
enum {
IPV6_SADDR_RULE_INIT = 0,
IPV6_SADDR_RULE_LOCAL,
IPV6_SADDR_RULE_SCOPE,
IPV6_SADDR_RULE_PREFERRED,
#ifdef CONFIG_IPV6_MIP6
IPV6_SADDR_RULE_HOA,
#endif
IPV6_SADDR_RULE_OIF,
IPV6_SADDR_RULE_LABEL,
#ifdef CONFIG_IPV6_PRIVACY
IPV6_SADDR_RULE_PRIVACY,
#endif
IPV6_SADDR_RULE_ORCHID,
IPV6_SADDR_RULE_PREFIX,
IPV6_SADDR_RULE_MAX
};
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
struct ipv6_saddr_score {
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
int rule;
int addr_type;
struct inet6_ifaddr *ifa;
DECLARE_BITMAP(scorebits, IPV6_SADDR_RULE_MAX);
int scopedist;
int matchlen;
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
};
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
struct ipv6_saddr_dst {
[IPV6]: Make address arguments const. - net/ipv6/addrconf.c: ipv6_get_ifaddr(), ipv6_dev_get_saddr() - net/ipv6/mcast.c: ipv6_sock_mc_join(), ipv6_sock_mc_drop(), inet6_mc_check(), ipv6_dev_mc_inc(), __ipv6_dev_mc_dec(), ipv6_dev_mc_dec(), ipv6_chk_mcast_addr() - net/ipv6/route.c: rt6_lookup(), icmp6_dst_alloc() - net/ipv6/ip6_output.c: ip6_nd_hdr() - net/ipv6/ndisc.c: ndisc_send_ns(), ndisc_send_rs(), ndisc_send_redirect(), ndisc_get_neigh(), __ndisc_send() Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:10 +00:00
const struct in6_addr *addr;
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
int ifindex;
int scope;
int label;
[IPV6]: Support Source Address Selection API (RFC5014). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 00:37:42 +00:00
unsigned int prefs;
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
};
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
[NET]: fix up misplaced inlines. Turning up the warnings on gcc makes it emit warnings about the placement of 'inline' in function declarations. Here's everything that was under net/ Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 19:27:49 +00:00
static inline int ipv6_saddr_preferred(int type)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
ipv6: Remove IPV6_ADDR_RESERVED RFC 4291 section 2.4 states that all uncategorized addresses should be considered as Global Unicast. This will remove IPV6_ADDR_RESERVED completely and return IPV6_ADDR_UNICAST in ipv6_addr_type() instead. Signed-off-by: Ulrich Weber <uweber@astaro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-25 23:28:58 +00:00
if (type & (IPV6_ADDR_MAPPED|IPV6_ADDR_COMPATv4|IPV6_ADDR_LOOPBACK))
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
return 1;
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv6 netns: Address labels per namespace This pacth makes IPv6 address labels per network namespace. It keeps the global label tables, ip6addrlbl_table, but adds a 'net' member to each ip6addrlbl_entry. This new member is taken into account when matching labels. Changelog ========= * v1: Initial version * v2: * Minize the penalty when network namespaces are not configured: * the 'net' member is added only if CONFIG_NET_NS is defined. This saves space when network namespaces are not configured. * 'net' value is retrieved with the inlined function ip6addrlbl_net() that always return &init_net when CONFIG_NET_NS is not defined. * 'net' member in ip6addrlbl_entry renamed to the less generic 'lbl_net' name (helps code search). Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-28 12:51:24 +00:00
static int ipv6_get_saddr_eval(struct net *net,
struct ipv6_saddr_score *score,
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
struct ipv6_saddr_dst *dst,
int i)
{
int ret;
if (i <= score->rule) {
switch (i) {
case IPV6_SADDR_RULE_SCOPE:
ret = score->scopedist;
break;
case IPV6_SADDR_RULE_PREFIX:
ret = score->matchlen;
break;
default:
ret = !!test_bit(i, score->scorebits);
}
goto out;
}
switch (i) {
case IPV6_SADDR_RULE_INIT:
/* Rule 0: remember if hiscore is not ready yet */
ret = !!score->ifa;
break;
case IPV6_SADDR_RULE_LOCAL:
/* Rule 1: Prefer same address */
ret = ipv6_addr_equal(&score->ifa->addr, dst->addr);
break;
case IPV6_SADDR_RULE_SCOPE:
/* Rule 2: Prefer appropriate scope
*
* ret
* ^
* -1 | d 15
* ---+--+-+---> scope
* |
* | d is scope of the destination.
* B-d | \
* | \ <- smaller scope is better if
* B-15 | \ if scope is enough for destinaion.
* | ret = B - scope (-1 <= scope >= d <= 15).
* d-C-1 | /
* |/ <- greater is better
* -C / if scope is not enough for destination.
* /| ret = scope - C (-1 <= d < scope <= 15).
*
* d - C - 1 < B -15 (for all -1 <= d <= 15).
* C > d + 14 - B >= 15 + 14 - B = 29 - B.
* Assume B = 0 and we get C > 29.
*/
ret = __ipv6_addr_src_scope(score->addr_type);
if (ret >= dst->scope)
ret = -ret;
else
ret -= 128; /* 30 is enough */
score->scopedist = ret;
break;
case IPV6_SADDR_RULE_PREFERRED:
/* Rule 3: Avoid deprecated and optimistic addresses */
ret = ipv6_saddr_preferred(score->addr_type) ||
!(score->ifa->flags & (IFA_F_DEPRECATED|IFA_F_OPTIMISTIC));
break;
#ifdef CONFIG_IPV6_MIP6
case IPV6_SADDR_RULE_HOA:
[IPV6]: Support Source Address Selection API (RFC5014). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 00:37:42 +00:00
{
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
/* Rule 4: Prefer home address */
[IPV6]: Support Source Address Selection API (RFC5014). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 00:37:42 +00:00
int prefhome = !(dst->prefs & IPV6_PREFER_SRC_COA);
ret = !(score->ifa->flags & IFA_F_HOMEADDRESS) ^ prefhome;
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
break;
[IPV6]: Support Source Address Selection API (RFC5014). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 00:37:42 +00:00
}
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
#endif
case IPV6_SADDR_RULE_OIF:
/* Rule 5: Prefer outgoing interface */
ret = (!dst->ifindex ||
dst->ifindex == score->ifa->idev->dev->ifindex);
break;
case IPV6_SADDR_RULE_LABEL:
/* Rule 6: Prefer matching label */
ipv6 netns: Address labels per namespace This pacth makes IPv6 address labels per network namespace. It keeps the global label tables, ip6addrlbl_table, but adds a 'net' member to each ip6addrlbl_entry. This new member is taken into account when matching labels. Changelog ========= * v1: Initial version * v2: * Minize the penalty when network namespaces are not configured: * the 'net' member is added only if CONFIG_NET_NS is defined. This saves space when network namespaces are not configured. * 'net' value is retrieved with the inlined function ip6addrlbl_net() that always return &init_net when CONFIG_NET_NS is not defined. * 'net' member in ip6addrlbl_entry renamed to the less generic 'lbl_net' name (helps code search). Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-28 12:51:24 +00:00
ret = ipv6_addr_label(net,
&score->ifa->addr, score->addr_type,
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
score->ifa->idev->dev->ifindex) == dst->label;
break;
#ifdef CONFIG_IPV6_PRIVACY
case IPV6_SADDR_RULE_PRIVACY:
[IPV6]: Support Source Address Selection API (RFC5014). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 00:37:42 +00:00
{
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
/* Rule 7: Prefer public address
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 01:57:33 +00:00
* Note: prefer temporary address if use_tempaddr >= 2
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
*/
[IPV6]: Support Source Address Selection API (RFC5014). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 00:37:42 +00:00
int preftmp = dst->prefs & (IPV6_PREFER_SRC_PUBLIC|IPV6_PREFER_SRC_TMP) ?
!!(dst->prefs & IPV6_PREFER_SRC_TMP) :
score->ifa->idev->cnf.use_tempaddr >= 2;
ret = (!(score->ifa->flags & IFA_F_TEMPORARY)) ^ preftmp;
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
break;
[IPV6]: Support Source Address Selection API (RFC5014). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 00:37:42 +00:00
}
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
#endif
case IPV6_SADDR_RULE_ORCHID:
/* Rule 8-: Prefer ORCHID vs ORCHID or
* non-ORCHID vs non-ORCHID
*/
ret = !(ipv6_addr_orchid(&score->ifa->addr) ^
ipv6_addr_orchid(dst->addr));
break;
case IPV6_SADDR_RULE_PREFIX:
/* Rule 8: Use longest matching prefix */
ipv6: Compare addresses only bits up to the prefix length (RFC6724). Compare bits up to the source address's prefix length only to allows DNS load balancing to continue to be used as a tie breaker. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10 18:41:07 +00:00
ret = ipv6_addr_diff(&score->ifa->addr, dst->addr);
if (ret > score->ifa->prefix_len)
ret = score->ifa->prefix_len;
score->matchlen = ret;
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
break;
default:
ret = 0;
}
if (ret)
__set_bit(i, score->scorebits);
score->rule = i;
out:
return ret;
}
netfilter: ip6tables: add MASQUERADE target Signed-off-by: Patrick McHardy <kaber@trash.net>
2012-08-26 17:14:14 +00:00
int ipv6_dev_get_saddr(struct net *net, const struct net_device *dst_dev,
[IPV6]: Make address arguments const. - net/ipv6/addrconf.c: ipv6_get_ifaddr(), ipv6_dev_get_saddr() - net/ipv6/mcast.c: ipv6_sock_mc_join(), ipv6_sock_mc_drop(), inet6_mc_check(), ipv6_dev_mc_inc(), __ipv6_dev_mc_dec(), ipv6_dev_mc_dec(), ipv6_chk_mcast_addr() - net/ipv6/route.c: rt6_lookup(), icmp6_dst_alloc() - net/ipv6/ip6_output.c: ip6_nd_hdr() - net/ipv6/ndisc.c: ndisc_send_ns(), ndisc_send_rs(), ndisc_send_redirect(), ndisc_get_neigh(), __ndisc_send() Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:10 +00:00
const struct in6_addr *daddr, unsigned int prefs,
[IPV6]: Support Source Address Selection API (RFC5014). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 00:37:42 +00:00
struct in6_addr *saddr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
struct ipv6_saddr_score scores[2],
*score = &scores[0], *hiscore = &scores[1];
struct ipv6_saddr_dst dst;
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
struct net_device *dev;
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
int dst_type;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
dst_type = __ipv6_addr_type(daddr);
dst.addr = daddr;
dst.ifindex = dst_dev ? dst_dev->ifindex : 0;
dst.scope = __ipv6_addr_src_scope(dst_type);
ipv6 netns: Address labels per namespace This pacth makes IPv6 address labels per network namespace. It keeps the global label tables, ip6addrlbl_table, but adds a 'net' member to each ip6addrlbl_entry. This new member is taken into account when matching labels. Changelog ========= * v1: Initial version * v2: * Minize the penalty when network namespaces are not configured: * the 'net' member is added only if CONFIG_NET_NS is defined. This saves space when network namespaces are not configured. * 'net' value is retrieved with the inlined function ip6addrlbl_net() that always return &init_net when CONFIG_NET_NS is not defined. * 'net' member in ip6addrlbl_entry renamed to the less generic 'lbl_net' name (helps code search). Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-28 12:51:24 +00:00
dst.label = ipv6_addr_label(net, daddr, dst_type, dst.ifindex);
[IPV6]: Support Source Address Selection API (RFC5014). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 00:37:42 +00:00
dst.prefs = prefs;
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
hiscore->rule = -1;
hiscore->ifa = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6] ADDRCONF: Convert addrconf_lock to RCU. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:44:24 +00:00
rcu_read_lock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
net: Introduce for_each_netdev_rcu() iterator Adds RCU management to the list of netdevices. Convert some for_each_netdev() users to RCU version, if it can avoid read_lock-ing dev_base_lock Ie: read_lock(&dev_base_loack); for_each_netdev(net, dev) some_action(); read_unlock(&dev_base_lock); becomes : rcu_read_lock(); for_each_netdev_rcu(net, dev) some_action(); rcu_read_unlock(); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 13:43:23 +00:00
for_each_netdev_rcu(net, dev) {
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
struct inet6_dev *idev;
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
/* Candidate Source Address (section 4)
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
* - multicast and link-local destination address,
* the set of candidate source address MUST only
* include addresses assigned to interfaces
* belonging to the same link as the outgoing
* interface.
* (- For site-local destination addresses, the
* set of candidate source addresses MUST only
* include addresses assigned to interfaces
* belonging to the same site as the outgoing
* interface.)
*/
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
if (((dst_type & IPV6_ADDR_MULTICAST) ||
dst.scope <= IPV6_ADDR_SCOPE_LINKLOCAL) &&
dst.ifindex && dev->ifindex != dst.ifindex)
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
idev = __in6_dev_get(dev);
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
if (!idev)
continue;
read_lock_bh(&idev->lock);
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
list_for_each_entry(score->ifa, &idev->addr_list, if_list) {
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
int i;
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
/*
[IPV6]: Don't select a tentative address as a source address. A tentative address is not considered "assigned to an interface" in the traditional sense (RFC2462 Section 4). Don't try to select such an address for the source address. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:58:01 +00:00
* - Tentative Address (RFC2462 section 5.4)
* - A tentative address is not considered
* "assigned to an interface" in the traditional
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
* sense, unless it is also flagged as optimistic.
[IPV6]: Don't select a tentative address as a source address. A tentative address is not considered "assigned to an interface" in the traditional sense (RFC2462 Section 4). Don't try to select such an address for the source address. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:58:01 +00:00
* - Candidate Source Address (section 4)
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
* - In any case, anycast addresses, multicast
* addresses, and the unspecified address MUST
* NOT be included in a candidate set.
*/
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
if ((score->ifa->flags & IFA_F_TENTATIVE) &&
(!(score->ifa->flags & IFA_F_OPTIMISTIC)))
[IPV6]: Don't select a tentative address as a source address. A tentative address is not considered "assigned to an interface" in the traditional sense (RFC2462 Section 4). Don't try to select such an address for the source address. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:58:01 +00:00
continue;
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
score->addr_type = __ipv6_addr_type(&score->ifa->addr);
if (unlikely(score->addr_type == IPV6_ADDR_ANY ||
score->addr_type & IPV6_ADDR_MULTICAST)) {
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
LIMIT_NETDEBUG(KERN_DEBUG
[IPV6]: Add missing "space" Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-20 07:47:25 +00:00
"ADDRCONF: unspecified / multicast address "
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
"assigned as unicast address on %s",
dev->name);
continue;
}
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
score->rule = -1;
bitmap_zero(score->scorebits, IPV6_SADDR_RULE_MAX);
for (i = 0; i < IPV6_SADDR_RULE_MAX; i++) {
int minihiscore, miniscore;
ipv6 netns: Address labels per namespace This pacth makes IPv6 address labels per network namespace. It keeps the global label tables, ip6addrlbl_table, but adds a 'net' member to each ip6addrlbl_entry. This new member is taken into account when matching labels. Changelog ========= * v1: Initial version * v2: * Minize the penalty when network namespaces are not configured: * the 'net' member is added only if CONFIG_NET_NS is defined. This saves space when network namespaces are not configured. * 'net' value is retrieved with the inlined function ip6addrlbl_net() that always return &init_net when CONFIG_NET_NS is not defined. * 'net' member in ip6addrlbl_entry renamed to the less generic 'lbl_net' name (helps code search). Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-28 12:51:24 +00:00
minihiscore = ipv6_get_saddr_eval(net, hiscore, &dst, i);
miniscore = ipv6_get_saddr_eval(net, score, &dst, i);
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
if (minihiscore > miniscore) {
if (i == IPV6_SADDR_RULE_SCOPE &&
score->scopedist > 0) {
/*
* special case:
* each remaining entry
* has too small (not enough)
* scope, because ifa entries
* are sorted by their scope
* values.
*/
goto try_nextdev;
}
break;
} else if (minihiscore < miniscore) {
if (hiscore->ifa)
in6_ifa_put(hiscore->ifa);
in6_ifa_hold(score->ifa);
net/*: use linux/kernel.h swap() tcp_sack_swap seems unnecessary so I pushed swap to the caller. Also removed comment that seemed then pointless, and added include when not already there. Compile tested. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 20:36:17 +00:00
swap(hiscore, score);
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
/* restore our iterator */
score->ifa = hiscore->ifa;
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
try_nextdev:
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
read_unlock_bh(&idev->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6] ADDRCONF: Convert addrconf_lock to RCU. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:44:24 +00:00
rcu_read_unlock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
if (!hiscore->ifa)
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
return -EADDRNOTAVAIL;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
net: remove ipv6_addr_copy() C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21 03:39:03 +00:00
*saddr = hiscore->ifa->addr;
[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr(). old: | text data bss dec hex filename | 28599 1416 96 30111 759f net/ipv6/addrconf.o new: | text data bss dec hex filename | 28007 1416 96 29519 734f net/ipv6/addrconf.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-02 01:48:21 +00:00
in6_ifa_put(hiscore->ifa);
[IPV6]: RFC3484 compliant source address selection Choose more appropriate source address; e.g. - outgoing interface - non-deprecated - scope - matching label Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 17:38:30 +00:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr(). Since most users of ipv6_get_saddr() pass non-NULL as dst argument, use ipv6_dev_get_saddr() directly. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-03 12:44:34 +00:00
EXPORT_SYMBOL(ipv6_dev_get_saddr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
int ipv6_get_lladdr(struct net_device *dev, struct in6_addr *addr,
unsigned char banned_flags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct inet6_dev *idev;
int err = -EADDRNOTAVAIL;
[IPV6] ADDRCONF: Convert addrconf_lock to RCU. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:44:24 +00:00
rcu_read_lock();
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
idev = __in6_dev_get(dev);
if (idev) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct inet6_ifaddr *ifp;
read_lock_bh(&idev->lock);
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
list_for_each_entry(ifp, &idev->addr_list, if_list) {
if (ifp->scope == IFA_LINK &&
!(ifp->flags & banned_flags)) {
net: remove ipv6_addr_copy() C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21 03:39:03 +00:00
*addr = ifp->addr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
err = 0;
break;
}
}
read_unlock_bh(&idev->lock);
}
[IPV6] ADDRCONF: Convert addrconf_lock to RCU. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:44:24 +00:00
rcu_read_unlock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return err;
}
static int ipv6_count_addresses(struct inet6_dev *idev)
{
int cnt = 0;
struct inet6_ifaddr *ifp;
read_lock_bh(&idev->lock);
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
list_for_each_entry(ifp, &idev->addr_list, if_list)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
cnt++;
read_unlock_bh(&idev->lock);
return cnt;
}
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 04:53:02 +00:00
int ipv6_chk_addr(struct net *net, const struct in6_addr *addr,
[NETNS][IPV6]: inet6_addr - check ipv6 address per namespace When a new address is added, we must check if the new address does not already exists. This patch makes this check to be aware of a network namespace, so the check will look if the address already exists for the specified network namespace. While the addresses are browsed, the addresses which do not belong to the namespace are discarded. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:43:18 +00:00
struct net_device *dev, int strict)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
ipv6: fix the bug of address check The duplicate address check code got broken in the conversion to hlist (2.6.35). The earlier patch did not fix the case where two addresses match same hash value. Use two exit paths, rather than depending on state of loop variables (from macro). Based on earlier fix by Shan Wei. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:27:12 +00:00
struct inet6_ifaddr *ifp;
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
struct hlist_node *node;
ipv6: add ipv6_addr_hash() helper Introduce ipv6_addr_hash() helper doing a XOR on all bits of an IPv6 address, with an optimized x86_64 version. Use it in flow dissector, as suggested by Andrew McGregor, to reduce hash collision probabilities in fq_codel (and other users of flow dissector) Use it in ip6_tunnel.c and use more bit shuffling, as suggested by David Laight, as existing hash was ignoring most of them. Use it in sunrpc and use more bit shuffling, using hash_32(). Use it in net/ipv6/addrconf.c, using hash_32() as well. As a cleanup, use it in net/ipv4/tcp_metrics.c Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrew McGregor <andrewmcgr@gmail.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Tom Herbert <therbert@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18 08:11:12 +00:00
unsigned int hash = inet6_addr_hash(addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
rcu_read_lock_bh();
hlist_for_each_entry_rcu(ifp, node, &inet6_addr_lst[hash], addr_lst) {
[NET] NETNS: Omit namespace comparision without CONFIG_NET_NS. Introduce an inline net_eq() to compare two namespaces. Without CONFIG_NET_NS, since no namespace other than &init_net exists, it is always 1. We do not need to convert 1) inline vs inline and 2) inline vs &init_net comparisons. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 18:57:35 +00:00
if (!net_eq(dev_net(ifp->idev->dev), net))
[NETNS][IPV6]: inet6_addr - check ipv6 address per namespace When a new address is added, we must check if the new address does not already exists. This patch makes this check to be aware of a network namespace, so the check will look if the address already exists for the specified network namespace. While the addresses are browsed, the addresses which do not belong to the namespace are discarded. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:43:18 +00:00
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (ipv6_addr_equal(&ifp->addr, addr) &&
ipv6: fix the bug of address check The duplicate address check code got broken in the conversion to hlist (2.6.35). The earlier patch did not fix the case where two addresses match same hash value. Use two exit paths, rather than depending on state of loop variables (from macro). Based on earlier fix by Shan Wei. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:27:12 +00:00
!(ifp->flags&IFA_F_TENTATIVE) &&
(dev == NULL || ifp->idev->dev == dev ||
!(ifp->scope&(IFA_LINK|IFA_HOST) || strict))) {
rcu_read_unlock_bh();
return 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
ipv6: fix the bug of address check The duplicate address check code got broken in the conversion to hlist (2.6.35). The earlier patch did not fix the case where two addresses match same hash value. Use two exit paths, rather than depending on state of loop variables (from macro). Based on earlier fix by Shan Wei. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:27:12 +00:00
rcu_read_unlock_bh();
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6]: Decentralize EXPORT_SYMBOLs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-02-22 13:05:40 +00:00
EXPORT_SYMBOL(ipv6_chk_addr);
ipv6: Fix bug in ipv6_chk_same_addr(). hlist_for_each_entry(p...) will not necessarily initialize 'p' to anything if the hlist is empty. GCC notices this and emits a warning. Just return true explicitly when we hit a match, and return false is we fall out of the loop without one. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:18:00 +00:00
static bool ipv6_chk_same_addr(struct net *net, const struct in6_addr *addr,
struct net_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
ipv6: add ipv6_addr_hash() helper Introduce ipv6_addr_hash() helper doing a XOR on all bits of an IPv6 address, with an optimized x86_64 version. Use it in flow dissector, as suggested by Andrew McGregor, to reduce hash collision probabilities in fq_codel (and other users of flow dissector) Use it in ip6_tunnel.c and use more bit shuffling, as suggested by David Laight, as existing hash was ignoring most of them. Use it in sunrpc and use more bit shuffling, using hash_32(). Use it in net/ipv6/addrconf.c, using hash_32() as well. As a cleanup, use it in net/ipv4/tcp_metrics.c Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrew McGregor <andrewmcgr@gmail.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Tom Herbert <therbert@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18 08:11:12 +00:00
unsigned int hash = inet6_addr_hash(addr);
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
struct inet6_ifaddr *ifp;
struct hlist_node *node;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
hlist_for_each_entry(ifp, node, &inet6_addr_lst[hash], addr_lst) {
[NET] NETNS: Omit namespace comparision without CONFIG_NET_NS. Introduce an inline net_eq() to compare two namespaces. Without CONFIG_NET_NS, since no namespace other than &init_net exists, it is always 1. We do not need to convert 1) inline vs inline and 2) inline vs &init_net comparisons. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 18:57:35 +00:00
if (!net_eq(dev_net(ifp->idev->dev), net))
[NETNS][IPV6]: inet6_addr - ipv6_chk_same_addr namespace aware This patch makes ipv6_chk_same_addr function to be aware of the network namespace. The addresses not belonging to the network namespace are discarded. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:43:42 +00:00
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (ipv6_addr_equal(&ifp->addr, addr)) {
if (dev == NULL || ifp->idev->dev == dev)
ipv6: Fix bug in ipv6_chk_same_addr(). hlist_for_each_entry(p...) will not necessarily initialize 'p' to anything if the hlist is empty. GCC notices this and emits a warning. Just return true explicitly when we hit a match, and return false is we fall out of the loop without one. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:18:00 +00:00
return true;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
ipv6: Fix bug in ipv6_chk_same_addr(). hlist_for_each_entry(p...) will not necessarily initialize 'p' to anything if the hlist is empty. GCC notices this and emits a warning. Just return true explicitly when we hit a match, and return false is we fall out of the loop without one. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:18:00 +00:00
return false;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 04:53:02 +00:00
int ipv6_chk_prefix(const struct in6_addr *addr, struct net_device *dev)
[IPV6]: Unify ip6_onlink() and ipip6_onlink(). Both are identical, let's create ipv6_chk_prefix() and use it in both places.
2008-03-16 02:54:23 +00:00
{
struct inet6_dev *idev;
struct inet6_ifaddr *ifa;
int onlink;
onlink = 0;
rcu_read_lock();
idev = __in6_dev_get(dev);
if (idev) {
read_lock_bh(&idev->lock);
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
list_for_each_entry(ifa, &idev->addr_list, if_list) {
[IPV6]: Unify ip6_onlink() and ipip6_onlink(). Both are identical, let's create ipv6_chk_prefix() and use it in both places.
2008-03-16 02:54:23 +00:00
onlink = ipv6_prefix_equal(addr, &ifa->addr,
ifa->prefix_len);
if (onlink)
break;
}
read_unlock_bh(&idev->lock);
}
rcu_read_unlock();
return onlink;
}
EXPORT_SYMBOL(ipv6_chk_prefix);
[IPV6]: Make address arguments const. - net/ipv6/addrconf.c: ipv6_get_ifaddr(), ipv6_dev_get_saddr() - net/ipv6/mcast.c: ipv6_sock_mc_join(), ipv6_sock_mc_drop(), inet6_mc_check(), ipv6_dev_mc_inc(), __ipv6_dev_mc_dec(), ipv6_dev_mc_dec(), ipv6_chk_mcast_addr() - net/ipv6/route.c: rt6_lookup(), icmp6_dst_alloc() - net/ipv6/ip6_output.c: ip6_nd_hdr() - net/ipv6/ndisc.c: ndisc_send_ns(), ndisc_send_rs(), ndisc_send_redirect(), ndisc_get_neigh(), __ndisc_send() Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:10 +00:00
struct inet6_ifaddr *ipv6_get_ifaddr(struct net *net, const struct in6_addr *addr,
[NETNS][IPV6]: inet6_addr - ipv6_get_ifaddr namespace aware The inet6_addr_lst is browsed taking into account the network namespace specified as parameter. If an address does not belong to the specified namespace, it is ignored. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:44:09 +00:00
struct net_device *dev, int strict)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
ipv6: Fix result generation in ipv6_get_ifaddr(). Finishing naturally from hlist_for_each_entry(x, ...) does not result in 'x' being NULL. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26 04:39:21 +00:00
struct inet6_ifaddr *ifp, *result = NULL;
ipv6: add ipv6_addr_hash() helper Introduce ipv6_addr_hash() helper doing a XOR on all bits of an IPv6 address, with an optimized x86_64 version. Use it in flow dissector, as suggested by Andrew McGregor, to reduce hash collision probabilities in fq_codel (and other users of flow dissector) Use it in ip6_tunnel.c and use more bit shuffling, as suggested by David Laight, as existing hash was ignoring most of them. Use it in sunrpc and use more bit shuffling, using hash_32(). Use it in net/ipv6/addrconf.c, using hash_32() as well. As a cleanup, use it in net/ipv4/tcp_metrics.c Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrew McGregor <andrewmcgr@gmail.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Tom Herbert <therbert@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18 08:11:12 +00:00
unsigned int hash = inet6_addr_hash(addr);
ipv6: Fix result generation in ipv6_get_ifaddr(). Finishing naturally from hlist_for_each_entry(x, ...) does not result in 'x' being NULL. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26 04:39:21 +00:00
struct hlist_node *node;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
rcu_read_lock_bh();
net: rcu fixes Add hlist_for_each_entry_rcu_bh() and hlist_for_each_entry_continue_rcu_bh() macros, and use them in ipv6_get_ifaddr(), if6_get_first() and if6_get_next() to fix lockdeps warnings. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 10:50:14 +00:00
hlist_for_each_entry_rcu_bh(ifp, node, &inet6_addr_lst[hash], addr_lst) {
[NET] NETNS: Omit namespace comparision without CONFIG_NET_NS. Introduce an inline net_eq() to compare two namespaces. Without CONFIG_NET_NS, since no namespace other than &init_net exists, it is always 1. We do not need to convert 1) inline vs inline and 2) inline vs &init_net comparisons. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 18:57:35 +00:00
if (!net_eq(dev_net(ifp->idev->dev), net))
[NETNS][IPV6]: inet6_addr - ipv6_get_ifaddr namespace aware The inet6_addr_lst is browsed taking into account the network namespace specified as parameter. If an address does not belong to the specified namespace, it is ignored. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:44:09 +00:00
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (ipv6_addr_equal(&ifp->addr, addr)) {
if (dev == NULL || ifp->idev->dev == dev ||
!(ifp->scope&(IFA_LINK|IFA_HOST) || strict)) {
ipv6: Fix result generation in ipv6_get_ifaddr(). Finishing naturally from hlist_for_each_entry(x, ...) does not result in 'x' being NULL. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26 04:39:21 +00:00
result = ifp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_ifa_hold(ifp);
break;
}
}
}
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
rcu_read_unlock_bh();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6: Fix result generation in ipv6_get_ifaddr(). Finishing naturally from hlist_for_each_entry(x, ...) does not result in 'x' being NULL. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26 04:39:21 +00:00
return result;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/* Gets referenced address, destroys ifaddr */
ipv6: Add IFA_F_DADFAILED flag Add IFA_F_DADFAILED flag to denote an IPv6 address that has failed Duplicate Address Detection, that way tools like /sbin/ip can be more informative. 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:db8::1/64 scope global tentative dadfailed valid_lft forever preferred_lft forever Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09 14:41:32 +00:00
static void addrconf_dad_stop(struct inet6_ifaddr *ifp, int dad_failed)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
if (ifp->flags&IFA_F_PERMANENT) {
spin_lock_bh(&ifp->lock);
addrconf_del_timer(ifp);
ifp->flags |= IFA_F_TENTATIVE;
ipv6: Add IFA_F_DADFAILED flag Add IFA_F_DADFAILED flag to denote an IPv6 address that has failed Duplicate Address Detection, that way tools like /sbin/ip can be more informative. 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:db8::1/64 scope global tentative dadfailed valid_lft forever preferred_lft forever Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09 14:41:32 +00:00
if (dad_failed)
ifp->flags |= IFA_F_DADFAILED;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_unlock_bh(&ifp->lock);
ipv6: Send netlink notification when DAD fails If we are managing IPv6 addresses using DHCP, it would be nice for user-space to be notified if an address configured through DHCP fails DAD. Otherwise user-space would have to poll to see whether DAD succeeds. This patch uses the existing notification mechanism and simply hooks it into the DAD failure code path. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-13 20:23:29 +00:00
if (dad_failed)
ipv6_ifa_notify(0, ifp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_ifa_put(ifp);
#ifdef CONFIG_IPV6_PRIVACY
} else if (ifp->flags&IFA_F_TEMPORARY) {
struct inet6_ifaddr *ifpub;
spin_lock_bh(&ifp->lock);
ifpub = ifp->ifpub;
if (ifpub) {
in6_ifa_hold(ifpub);
spin_unlock_bh(&ifp->lock);
ipv6_create_tempaddr(ifpub, ifp);
in6_ifa_put(ifpub);
} else {
spin_unlock_bh(&ifp->lock);
}
ipv6_del_addr(ifp);
#endif
} else
ipv6_del_addr(ifp);
}
ipv6: Use POSTDAD state This patch makes use of the new POSTDAD state. This prevents a race between DAD completion and failure. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:55:27 +00:00
static int addrconf_dad_end(struct inet6_ifaddr *ifp)
{
int err = -ENOENT;
spin_lock(&ifp->state_lock);
if (ifp->state == INET6_IFADDR_STATE_DAD) {
ifp->state = INET6_IFADDR_STATE_POSTDAD;
err = 0;
}
spin_unlock(&ifp->state_lock);
return err;
}
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
void addrconf_dad_failure(struct inet6_ifaddr *ifp)
{
ipv6 addrconf: add accept_dad sysctl to control DAD operation. - If 0, disable DAD. - If 1, perform DAD (default). - If >1, perform DAD and disable IPv6 operation if DAD for MAC-based link-local address has been failed (RFC4862 5.4.5). We do not follow RFC4862 by default. Refer to the netdev thread entitled "Linux IPv6 DAD not full conform to RFC 4862 ?" http://www.spinics.net/lists/netdev/msg52027.html Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:18:38 +00:00
struct inet6_dev *idev = ifp->idev;
ipv6: Fix incorrect disable_ipv6 behavior Fix the behavior of allowing both sysctl and addrconf_dad_failure() to set the disable_ipv6 parameter without any bad side-effects. If DAD fails and accept_dad > 1, we will still set disable_ipv6=1, but then instead of allowing an RA to add an address then immediately fail DAD, we simply don't allow the address to be added in the first place. This also lets the user set this flag and disable all IPv6 addresses on the interface, or on the entire system. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-19 01:22:48 +00:00
ipv6: fix refcnt problem related to POSTDAD state After running this bonding setup script modprobe bonding miimon=100 mode=0 max_bonds=1 ifconfig bond0 10.1.1.1/16 ifenslave bond0 eth1 ifenslave bond0 eth3 on s390 with qeth-driven slaves, modprobe -r fails with this message unregister_netdevice: waiting for bond0 to become free. Usage count = 1 due to twice detection of duplicate address. Problem is caused by a missing decrease of ifp->refcnt in addrconf_dad_failure. An extra call of in6_ifa_put(ifp) solves it. Problem has been introduced with commit f2344a131bccdbfc5338e17fa71a807dee7944fa. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 23:06:43 +00:00
if (addrconf_dad_end(ifp)) {
in6_ifa_put(ifp);
ipv6: Use POSTDAD state This patch makes use of the new POSTDAD state. This prevents a race between DAD completion and failure. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:55:27 +00:00
return;
ipv6: fix refcnt problem related to POSTDAD state After running this bonding setup script modprobe bonding miimon=100 mode=0 max_bonds=1 ifconfig bond0 10.1.1.1/16 ifenslave bond0 eth1 ifenslave bond0 eth3 on s390 with qeth-driven slaves, modprobe -r fails with this message unregister_netdevice: waiting for bond0 to become free. Usage count = 1 due to twice detection of duplicate address. Problem is caused by a missing decrease of ifp->refcnt in addrconf_dad_failure. An extra call of in6_ifa_put(ifp) solves it. Problem has been introduced with commit f2344a131bccdbfc5338e17fa71a807dee7944fa. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 23:06:43 +00:00
}
ipv6: Use POSTDAD state This patch makes use of the new POSTDAD state. This prevents a race between DAD completion and failure. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:55:27 +00:00
net: Convert net_ratelimit uses to net_<level>_ratelimited Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13 21:56:26 +00:00
net_info_ratelimited("%s: IPv6 duplicate address %pI6c detected!\n",
ifp->idev->dev->name, &ifp->addr);
ipv6: Fix incorrect disable_ipv6 behavior Fix the behavior of allowing both sysctl and addrconf_dad_failure() to set the disable_ipv6 parameter without any bad side-effects. If DAD fails and accept_dad > 1, we will still set disable_ipv6=1, but then instead of allowing an RA to add an address then immediately fail DAD, we simply don't allow the address to be added in the first place. This also lets the user set this flag and disable all IPv6 addresses on the interface, or on the entire system. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-19 01:22:48 +00:00
ipv6 addrconf: add accept_dad sysctl to control DAD operation. - If 0, disable DAD. - If 1, perform DAD (default). - If >1, perform DAD and disable IPv6 operation if DAD for MAC-based link-local address has been failed (RFC4862 5.4.5). We do not follow RFC4862 by default. Refer to the netdev thread entitled "Linux IPv6 DAD not full conform to RFC 4862 ?" http://www.spinics.net/lists/netdev/msg52027.html Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:18:38 +00:00
if (idev->cnf.accept_dad > 1 && !idev->cnf.disable_ipv6) {
struct in6_addr addr;
addr.s6_addr32[0] = htonl(0xfe800000);
addr.s6_addr32[1] = 0;
if (!ipv6_generate_eui64(addr.s6_addr + 8, idev->dev) &&
ipv6_addr_equal(&ifp->addr, &addr)) {
/* DAD failed for link-local based on MAC address */
idev->cnf.disable_ipv6 = 1;
ipv6: Fix incorrect disable_ipv6 behavior Fix the behavior of allowing both sysctl and addrconf_dad_failure() to set the disable_ipv6 parameter without any bad side-effects. If DAD fails and accept_dad > 1, we will still set disable_ipv6=1, but then instead of allowing an RA to add an address then immediately fail DAD, we simply don't allow the address to be added in the first place. This also lets the user set this flag and disable all IPv6 addresses on the interface, or on the entire system. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-19 01:22:48 +00:00
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
pr_info("%s: IPv6 being disabled!\n",
ipv6: Fix incorrect disable_ipv6 behavior Fix the behavior of allowing both sysctl and addrconf_dad_failure() to set the disable_ipv6 parameter without any bad side-effects. If DAD fails and accept_dad > 1, we will still set disable_ipv6=1, but then instead of allowing an RA to add an address then immediately fail DAD, we simply don't allow the address to be added in the first place. This also lets the user set this flag and disable all IPv6 addresses on the interface, or on the entire system. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-19 01:22:48 +00:00
ifp->idev->dev->name);
ipv6 addrconf: add accept_dad sysctl to control DAD operation. - If 0, disable DAD. - If 1, perform DAD (default). - If >1, perform DAD and disable IPv6 operation if DAD for MAC-based link-local address has been failed (RFC4862 5.4.5). We do not follow RFC4862 by default. Refer to the netdev thread entitled "Linux IPv6 DAD not full conform to RFC 4862 ?" http://www.spinics.net/lists/netdev/msg52027.html Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:18:38 +00:00
}
}
ipv6: Add IFA_F_DADFAILED flag Add IFA_F_DADFAILED flag to denote an IPv6 address that has failed Duplicate Address Detection, that way tools like /sbin/ip can be more informative. 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:db8::1/64 scope global tentative dadfailed valid_lft forever preferred_lft forever Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09 14:41:32 +00:00
addrconf_dad_stop(ifp, 1);
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Join to solicited addr multicast group. */
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 04:53:02 +00:00
void addrconf_join_solict(struct net_device *dev, const struct in6_addr *addr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct in6_addr maddr;
if (dev->flags&(IFF_LOOPBACK|IFF_NOARP))
return;
addrconf_addr_solict_mult(addr, &maddr);
ipv6_dev_mc_inc(dev, &maddr);
}
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 04:53:02 +00:00
void addrconf_leave_solict(struct inet6_dev *idev, const struct in6_addr *addr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct in6_addr maddr;
if (idev->dev->flags&(IFF_LOOPBACK|IFF_NOARP))
return;
addrconf_addr_solict_mult(addr, &maddr);
__ipv6_dev_mc_dec(idev, &maddr);
}
[NET]: Fix sparse warnings Of this type, mostly: CHECK net/ipv6/netfilter.c net/ipv6/netfilter.c:96:12: warning: symbol 'ipv6_netfilter_init' was not declared. Should it be static? net/ipv6/netfilter.c:101:6: warning: symbol 'ipv6_netfilter_fini' was not declared. Should it be static? Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-16 05:18:02 +00:00
static void addrconf_join_anycast(struct inet6_ifaddr *ifp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct in6_addr addr;
Disable router anycast address for /127 prefixes RFC 6164 requires that routers MUST disable Subnet-Router anycast for the prefix when /127 prefixes are used. No need for matching code in addrconf_leave_anycast() as it will silently ignore any attempt to leave an unknown anycast address. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05 23:04:13 +00:00
if (ifp->prefix_len == 127) /* RFC 6164 */
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6_addr_prefix(&addr, &ifp->addr, ifp->prefix_len);
if (ipv6_addr_any(&addr))
return;
ipv6_dev_ac_inc(ifp->idev->dev, &addr);
}
[NET]: Fix sparse warnings Of this type, mostly: CHECK net/ipv6/netfilter.c net/ipv6/netfilter.c:96:12: warning: symbol 'ipv6_netfilter_init' was not declared. Should it be static? net/ipv6/netfilter.c:101:6: warning: symbol 'ipv6_netfilter_fini' was not declared. Should it be static? Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-16 05:18:02 +00:00
static void addrconf_leave_anycast(struct inet6_ifaddr *ifp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct in6_addr addr;
ipv6: Do not leave router anycast address for /127 prefixes. Original commit 2bda8a0c8af... "Disable router anycast address for /127 prefixes" says: | No need for matching code in addrconf_leave_anycast() as it | will silently ignore any attempt to leave an unknown anycast | address. After analysis, because 1) we may add two or more prefixes on the same interface, or 2)user may have manually joined that anycast, we may hit chances to have anycast address which as if we had generated one by /127 prefix and we should not leave from subnet- router anycast address unconditionally. CC: Bjørn Mork <bjorn@mork.no> CC: Brian Haley <brian.haley@hp.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24 11:44:34 +00:00
if (ifp->prefix_len == 127) /* RFC 6164 */
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6_addr_prefix(&addr, &ifp->addr, ifp->prefix_len);
if (ipv6_addr_any(&addr))
return;
__ipv6_dev_ac_dec(ifp->idev, &addr);
}
[IPV6]: ADDRCONF: Split up ipv6_generate_eui64() by device type. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:54:49 +00:00
static int addrconf_ifid_eui48(u8 *eui, struct net_device *dev)
{
if (dev->addr_len != ETH_ALEN)
return -1;
memcpy(eui, dev->dev_addr, 3);
memcpy(eui + 5, dev->dev_addr + 3, 3);
/*
* The zSeries OSA network cards can be shared among various
* OS instances, but the OSA cards have only one MAC address.
* This leads to duplicate address conflicts in conjunction
* with IPv6 if more than one instance uses the same card.
*
* The driver for these cards can deliver a unique 16-bit
* identifier for each instance sharing the same card. It is
* placed instead of 0xFFFE in the interface identifier. The
* "u" bit of the interface identifier is not inverted in this
* case. Hence the resulting interface identifier has local
* scope according to RFC2373.
*/
if (dev->dev_id) {
eui[3] = (dev->dev_id >> 8) & 0xFF;
eui[4] = dev->dev_id & 0xFF;
} else {
eui[3] = 0xFF;
eui[4] = 0xFE;
eui[0] ^= 2;
}
return 0;
}
6lowpan: IPv6 link local address According to the RFC4944 (Transmission of IPv6 Packets over IEEE 802.15.4 Networks), chapter 7: The IPv6 link-local address [RFC4291] for an IEEE 802.15.4 interface is formed by appending the Interface Identifier, as defined above, to the prefix FE80::/64. 10 bits 54 bits 64 bits +----------+-----------------------+----------------------------+ |1111111010| (zeros) | Interface Identifier | +----------+-----------------------+----------------------------+ This patch adds IPv6 address generation support for the 6lowpan interfaces. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 03:25:52 +00:00
static int addrconf_ifid_eui64(u8 *eui, struct net_device *dev)
{
if (dev->addr_len != IEEE802154_ADDR_LEN)
return -1;
memcpy(eui, dev->dev_addr, 8);
return 0;
}
[IPV6]: ADDRCONF: Split up ipv6_generate_eui64() by device type. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:54:49 +00:00
static int addrconf_ifid_arcnet(u8 *eui, struct net_device *dev)
{
/* XXX: inherit EUI-64 from other interface -- yoshfuji */
if (dev->addr_len != ARCNET_ALEN)
return -1;
memset(eui, 0, 7);
net/ipv6/addrconf.c: Checkpatch cleanups net/ipv6/addrconf.c:340: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:342: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:444: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:1337: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:1526: ERROR: "(foo*)" should be "(foo *)" net/ipv6/addrconf.c:1671: ERROR: open brace '{' following function declarations go on the next line net/ipv6/addrconf.c:1914: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2368: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2370: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2416: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2437: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2573: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:3797: ERROR: "foo* bar" should be "foo *bar" Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 07:49:08 +00:00
eui[7] = *(u8 *)dev->dev_addr;
[IPV6]: ADDRCONF: Split up ipv6_generate_eui64() by device type. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:54:49 +00:00
return 0;
}
static int addrconf_ifid_infiniband(u8 *eui, struct net_device *dev)
{
if (dev->addr_len != INFINIBAND_ALEN)
return -1;
memcpy(eui, dev->dev_addr + 12, 8);
eui[0] |= 2;
return 0;
}
ipv6: make __ipv6_isatap_ifid static Another exported symbol only used in one file Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 20:17:53 +00:00
static int __ipv6_isatap_ifid(u8 *eui, __be32 addr)
[IPV6] ADDRCONF: Uninline ipv6_isatap_eui64(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:09 +00:00
{
addrconf: refuse isatap eui64 for INADDR_ANY A tunnel with no local ipv4 endpoint would otherwise use the ISATAP linklocal address fe80::5efe:0:0, which is invalid. Rather not add a linklocal address at all. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-19 12:56:51 +00:00
if (addr == 0)
return -1;
[IPV6] ADDRCONF: Uninline ipv6_isatap_eui64(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:09 +00:00
eui[0] = (ipv4_is_zeronet(addr) || ipv4_is_private_10(addr) ||
ipv4_is_loopback(addr) || ipv4_is_linklocal_169(addr) ||
ipv4_is_private_172(addr) || ipv4_is_test_192(addr) ||
ipv4_is_anycast_6to4(addr) || ipv4_is_private_192(addr) ||
ipv4_is_test_198(addr) || ipv4_is_multicast(addr) ||
ipv4_is_lbcast(addr)) ? 0x00 : 0x02;
eui[1] = 0;
eui[2] = 0x5E;
eui[3] = 0xFE;
memcpy(eui + 4, &addr, 4);
return 0;
}
static int addrconf_ifid_sit(u8 *eui, struct net_device *dev)
{
if (dev->priv_flags & IFF_ISATAP)
return __ipv6_isatap_ifid(eui, *(__be32 *)dev->dev_addr);
return -1;
}
ipv6: generate link local address for GRE tunnel Use same logic as SIT tunnel to handle link local address for GRE tunnel. OSPFv3 requires link-local address to function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 10:44:30 +00:00
static int addrconf_ifid_gre(u8 *eui, struct net_device *dev)
{
return __ipv6_isatap_ifid(eui, *(__be32 *)dev->dev_addr);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int ipv6_generate_eui64(u8 *eui, struct net_device *dev)
{
switch (dev->type) {
case ARPHRD_ETHER:
case ARPHRD_FDDI:
[IPV6]: ADDRCONF: Split up ipv6_generate_eui64() by device type. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:54:49 +00:00
return addrconf_ifid_eui48(eui, dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
case ARPHRD_ARCNET:
[IPV6]: ADDRCONF: Split up ipv6_generate_eui64() by device type. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:54:49 +00:00
return addrconf_ifid_arcnet(eui, dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
case ARPHRD_INFINIBAND:
[IPV6]: ADDRCONF: Split up ipv6_generate_eui64() by device type. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:54:49 +00:00
return addrconf_ifid_infiniband(eui, dev);
[IPV6]: Add RFC4214 support This patch includes support for the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) per RFC4214. It uses the SIT module, and is configured using extensions to the "iproute2" utility. The diffs are specific to the Linux 2.6.24-rc2 kernel distribution. This version includes the diff for ./include/linux/if.h which was missing in the v2.4 submission and is needed to make the patch compile. The patch has been installed, compiled and tested in a clean 2.6.24-rc2 kernel build area. Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-29 11:11:40 +00:00
case ARPHRD_SIT:
[IPV6] ADDRCONF: Uninline ipv6_isatap_eui64(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:09 +00:00
return addrconf_ifid_sit(eui, dev);
ipv6: generate link local address for GRE tunnel Use same logic as SIT tunnel to handle link local address for GRE tunnel. OSPFv3 requires link-local address to function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 10:44:30 +00:00
case ARPHRD_IPGRE:
return addrconf_ifid_gre(eui, dev);
6lowpan: IPv6 link local address According to the RFC4944 (Transmission of IPv6 Packets over IEEE 802.15.4 Networks), chapter 7: The IPv6 link-local address [RFC4291] for an IEEE 802.15.4 interface is formed by appending the Interface Identifier, as defined above, to the prefix FE80::/64. 10 bits 54 bits 64 bits +----------+-----------------------+----------------------------+ |1111111010| (zeros) | Interface Identifier | +----------+-----------------------+----------------------------+ This patch adds IPv6 address generation support for the 6lowpan interfaces. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 03:25:52 +00:00
case ARPHRD_IEEE802154:
return addrconf_ifid_eui64(eui, dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
return -1;
}
static int ipv6_inherit_eui64(u8 *eui, struct inet6_dev *idev)
{
int err = -1;
struct inet6_ifaddr *ifp;
read_lock_bh(&idev->lock);
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
list_for_each_entry(ifp, &idev->addr_list, if_list) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (ifp->scope == IFA_LINK && !(ifp->flags&IFA_F_TENTATIVE)) {
memcpy(eui, ifp->addr.s6_addr+8, 8);
err = 0;
break;
}
}
read_unlock_bh(&idev->lock);
return err;
}
#ifdef CONFIG_IPV6_PRIVACY
/* (re)generation of randomized interface identifier (RFC 3041 3.2, 3.5) */
ipv6: remove some deadcode __ipv6_regen_rndid no longer returns anything other than 0 so there's no point in verifying what it returns Signed-off-by: Sorin Dumitru <sdumitru@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30 02:01:45 +00:00
static void __ipv6_regen_rndid(struct inet6_dev *idev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
regen:
[IPV6]: ADDRCONF: Use our standard algorithm for randomized ifid. RFC 3041 describes an algorithm to generate random interface identifier. In RFC 3041bis, it is allowed to use different algorithm than one described in RFC 3041. So, let's use our standard pseudo random algorithm to simplify our implementation. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:54:09 +00:00
get_random_bytes(idev->rndid, sizeof(idev->rndid));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
idev->rndid[0] &= ~0x02;
/*
* <draft-ietf-ipngwg-temp-addresses-v2-00.txt>:
* check if generated address is not inappropriate
*
* - Reserved subnet anycast (RFC 2526)
* 11111101 11....11 1xxxxxxx
[IPV6]: Add RFC4214 support This patch includes support for the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) per RFC4214. It uses the SIT module, and is configured using extensions to the "iproute2" utility. The diffs are specific to the Linux 2.6.24-rc2 kernel distribution. This version includes the diff for ./include/linux/if.h which was missing in the v2.4 submission and is needed to make the patch compile. The patch has been installed, compiled and tested in a clean 2.6.24-rc2 kernel build area. Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-29 11:11:40 +00:00
* - ISATAP (RFC4214) 6.1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* 00-00-5E-FE-xx-xx-xx-xx
* - value 0
* - XXX: already assigned to an address on the device
*/
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
if (idev->rndid[0] == 0xfd &&
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
(idev->rndid[1]&idev->rndid[2]&idev->rndid[3]&idev->rndid[4]&idev->rndid[5]&idev->rndid[6]) == 0xff &&
(idev->rndid[7]&0x80))
goto regen;
if ((idev->rndid[0]|idev->rndid[1]) == 0) {
if (idev->rndid[2] == 0x5e && idev->rndid[3] == 0xfe)
goto regen;
if ((idev->rndid[2]|idev->rndid[3]|idev->rndid[4]|idev->rndid[5]|idev->rndid[6]|idev->rndid[7]) == 0x00)
goto regen;
}
}
static void ipv6_regen_rndid(unsigned long data)
{
struct inet6_dev *idev = (struct inet6_dev *) data;
unsigned long expires;
[IPV6] ADDRCONF: Convert addrconf_lock to RCU. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:44:24 +00:00
rcu_read_lock_bh();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
write_lock_bh(&idev->lock);
if (idev->dead)
goto out;
ipv6: remove some deadcode __ipv6_regen_rndid no longer returns anything other than 0 so there's no point in verifying what it returns Signed-off-by: Sorin Dumitru <sdumitru@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30 02:01:45 +00:00
__ipv6_regen_rndid(idev);
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
expires = jiffies +
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
idev->cnf.temp_prefered_lft * HZ -
ipv6: Use interface max_desync_factor instead of static default max_desync_factor can be configured per-interface, but nothing is using the value. Reported-by: Piotr Lewandowski <piotr.lewandowski@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-26 11:42:55 +00:00
idev->cnf.regen_max_retry * idev->cnf.dad_transmits * idev->nd_parms->retrans_time -
idev->cnf.max_desync_factor * HZ;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (time_before(expires, jiffies)) {
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
pr_warn("%s: too short regeneration interval; timer disabled for %s\n",
__func__, idev->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto out;
}
if (!mod_timer(&idev->regen_timer, expires))
in6_dev_hold(idev);
out:
write_unlock_bh(&idev->lock);
[IPV6] ADDRCONF: Convert addrconf_lock to RCU. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:44:24 +00:00
rcu_read_unlock_bh();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_dev_put(idev);
}
ipv6: remove some deadcode __ipv6_regen_rndid no longer returns anything other than 0 so there's no point in verifying what it returns Signed-off-by: Sorin Dumitru <sdumitru@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30 02:01:45 +00:00
static void __ipv6_try_regen_rndid(struct inet6_dev *idev, struct in6_addr *tmpaddr)
net/ipv6/addrconf.c: Checkpatch cleanups net/ipv6/addrconf.c:340: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:342: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:444: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:1337: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:1526: ERROR: "(foo*)" should be "(foo *)" net/ipv6/addrconf.c:1671: ERROR: open brace '{' following function declarations go on the next line net/ipv6/addrconf.c:1914: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2368: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2370: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2416: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2437: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2573: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:3797: ERROR: "foo* bar" should be "foo *bar" Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 07:49:08 +00:00
{
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (tmpaddr && memcmp(idev->rndid, &tmpaddr->s6_addr[8], 8) == 0)
ipv6: remove some deadcode __ipv6_regen_rndid no longer returns anything other than 0 so there's no point in verifying what it returns Signed-off-by: Sorin Dumitru <sdumitru@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30 02:01:45 +00:00
__ipv6_regen_rndid(idev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#endif
/*
* Add prefix route.
*/
static void
addrconf_prefix_route(struct in6_addr *pfx, int plen, struct net_device *dev,
[NETLINK]: Explicit typing This patch converts "unsigned flags" to use more explict types like u16 instead and incrementally introduces NLMSG_NEW(). Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-19 05:55:31 +00:00
unsigned long expires, u32 flags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[IPv6] route: FIB6 configuration using struct fib6_config Replaces the struct in6_rtmsg based interface orignating from the ioctl interface with a struct fib6_config based on. Allows changing the interface without breaking the ioctl interface and avoids passing on tons of parameters. The recently introduced struct nl_info is used to pass on netlink authorship information for notifications. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-22 07:01:08 +00:00
struct fib6_config cfg = {
.fc_table = RT6_TABLE_PREFIX,
.fc_metric = IP6_RT_PRIO_ADDRCONF,
.fc_ifindex = dev->ifindex,
.fc_expires = expires,
.fc_dst_len = plen,
.fc_flags = RTF_UP | flags,
[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS. Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 12:47:49 +00:00
.fc_nlinfo.nl_net = dev_net(dev),
ipv6: protocol for address routes This fixes a problem spotted with zebra, but not sure if it is necessary a kernel problem. With IPV6 when an address is added to an interface, Zebra creates a duplicate RIB entry, one as a connected route, and other as a kernel route. When an address is added to an interface the RTN_NEWADDR message causes Zebra to create a connected route. In IPV4 when an address is added to an interface a RTN_NEWROUTE message is set to user space with the protocol RTPROT_KERNEL. Zebra ignores these messages, because it already has the connected route. The problem is that route created in IPV6 has route protocol == RTPROT_BOOT. Was this a design decision or a bug? This fixes it. Same patch applies to both net-2.6 and stable. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-23 12:16:46 +00:00
.fc_protocol = RTPROT_KERNEL,
[IPv6] route: FIB6 configuration using struct fib6_config Replaces the struct in6_rtmsg based interface orignating from the ioctl interface with a struct fib6_config based on. Allows changing the interface without breaking the ioctl interface and avoids passing on tons of parameters. The recently introduced struct nl_info is used to pass on netlink authorship information for notifications. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-22 07:01:08 +00:00
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
net: remove ipv6_addr_copy() C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21 03:39:03 +00:00
cfg.fc_dst = *pfx;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Prevent useless cloning on PtP SIT.
This thing is done here expecting that the whole
class of non-broadcast devices need not cloning.
*/
ipv6: use IS_ENABLED() #if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29 16:23:10 +00:00
#if IS_ENABLED(CONFIG_IPV6_SIT)
[IPv6] route: FIB6 configuration using struct fib6_config Replaces the struct in6_rtmsg based interface orignating from the ioctl interface with a struct fib6_config based on. Allows changing the interface without breaking the ioctl interface and avoids passing on tons of parameters. The recently introduced struct nl_info is used to pass on netlink authorship information for notifications. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-22 07:01:08 +00:00
if (dev->type == ARPHRD_SIT && (dev->flags & IFF_POINTOPOINT))
cfg.fc_flags |= RTF_NONEXTHOP;
[IPV6]: Seperate sit driver to extra module (addrconf.c changes) This patch contains the changes to net/ipv6/addrconf.c to remove sit specific code if the sit driver is not selected. Signed-off-by: Joerg Roedel <joro-lkml@zlug.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-10 21:49:53 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPv6] route: FIB6 configuration using struct fib6_config Replaces the struct in6_rtmsg based interface orignating from the ioctl interface with a struct fib6_config based on. Allows changing the interface without breaking the ioctl interface and avoids passing on tons of parameters. The recently introduced struct nl_info is used to pass on netlink authorship information for notifications. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-22 07:01:08 +00:00
ip6_route_add(&cfg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv6: fix route lookup in addrconf_prefix_rcv() The route lookup to find a previously auto-configured route for a prefixes used to use rt6_lookup(), with the prefix from the RA used as an address. However, that kind of lookup ignores routing tables, the prefix length and route flags, so when there were other matching routes, even in different tables and/or with a different prefix length, the wrong route would be manipulated. Now, a new function "addrconf_get_prefix_route()" is used for the route lookup, which searches in RT6_TABLE_PREFIX and takes the prefix-length and route flags into account. Signed-off-by: Andreas Hofmeister <andi@collax.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-26 03:24:29 +00:00
static struct rt6_info *addrconf_get_prefix_route(const struct in6_addr *pfx,
int plen,
const struct net_device *dev,
u32 flags, u32 noflags)
{
struct fib6_node *fn;
struct rt6_info *rt = NULL;
struct fib6_table *table;
table = fib6_get_table(dev_net(dev), RT6_TABLE_PREFIX);
if (table == NULL)
return NULL;
ipv6: replace write lock with read lock when get route info geting route info does not write rt->rt6i_table, so replace write lock with read lock Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-11 21:59:01 +00:00
read_lock_bh(&table->tb6_lock);
ipv6: fix route lookup in addrconf_prefix_rcv() The route lookup to find a previously auto-configured route for a prefixes used to use rt6_lookup(), with the prefix from the RA used as an address. However, that kind of lookup ignores routing tables, the prefix length and route flags, so when there were other matching routes, even in different tables and/or with a different prefix length, the wrong route would be manipulated. Now, a new function "addrconf_get_prefix_route()" is used for the route lookup, which searches in RT6_TABLE_PREFIX and takes the prefix-length and route flags into account. Signed-off-by: Andreas Hofmeister <andi@collax.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-26 03:24:29 +00:00
fn = fib6_locate(&table->tb6_root, pfx, plen, NULL, 0);
if (!fn)
goto out;
for (rt = fn->leaf; rt; rt = rt->dst.rt6_next) {
ipv6: Kill rt6i_dev and rt6i_expires defines. It just obscures that the netdevice pointer and the expires value are implemented in the dst_entry sub-object of the ipv6 route. And it makes grepping for dst_entry member uses much harder too. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-29 01:19:20 +00:00
if (rt->dst.dev->ifindex != dev->ifindex)
ipv6: fix route lookup in addrconf_prefix_rcv() The route lookup to find a previously auto-configured route for a prefixes used to use rt6_lookup(), with the prefix from the RA used as an address. However, that kind of lookup ignores routing tables, the prefix length and route flags, so when there were other matching routes, even in different tables and/or with a different prefix length, the wrong route would be manipulated. Now, a new function "addrconf_get_prefix_route()" is used for the route lookup, which searches in RT6_TABLE_PREFIX and takes the prefix-length and route flags into account. Signed-off-by: Andreas Hofmeister <andi@collax.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-26 03:24:29 +00:00
continue;
if ((rt->rt6i_flags & flags) != flags)
continue;
ipv6: fix the noflags test in addrconf_get_prefix_route The tests on the flags in addrconf_get_prefix_route() does no make much sense: the 'noflags' parameter contains the set of flags that must not match with the route flags, so the test must be done against 'noflags', and not against 'flags'. Signed-off-by: Romain Kuntz <r.kuntz@ipflavors.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-09 14:02:26 +00:00
if ((rt->rt6i_flags & noflags) != 0)
ipv6: fix route lookup in addrconf_prefix_rcv() The route lookup to find a previously auto-configured route for a prefixes used to use rt6_lookup(), with the prefix from the RA used as an address. However, that kind of lookup ignores routing tables, the prefix length and route flags, so when there were other matching routes, even in different tables and/or with a different prefix length, the wrong route would be manipulated. Now, a new function "addrconf_get_prefix_route()" is used for the route lookup, which searches in RT6_TABLE_PREFIX and takes the prefix-length and route flags into account. Signed-off-by: Andreas Hofmeister <andi@collax.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-26 03:24:29 +00:00
continue;
dst_hold(&rt->dst);
break;
}
out:
ipv6: replace write lock with read lock when get route info geting route info does not write rt->rt6i_table, so replace write lock with read lock Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-11 21:59:01 +00:00
read_unlock_bh(&table->tb6_lock);
ipv6: fix route lookup in addrconf_prefix_rcv() The route lookup to find a previously auto-configured route for a prefixes used to use rt6_lookup(), with the prefix from the RA used as an address. However, that kind of lookup ignores routing tables, the prefix length and route flags, so when there were other matching routes, even in different tables and/or with a different prefix length, the wrong route would be manipulated. Now, a new function "addrconf_get_prefix_route()" is used for the route lookup, which searches in RT6_TABLE_PREFIX and takes the prefix-length and route flags into account. Signed-off-by: Andreas Hofmeister <andi@collax.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-26 03:24:29 +00:00
return rt;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Create "default" multicast route to the interface */
static void addrconf_add_mroute(struct net_device *dev)
{
[IPv6] route: FIB6 configuration using struct fib6_config Replaces the struct in6_rtmsg based interface orignating from the ioctl interface with a struct fib6_config based on. Allows changing the interface without breaking the ioctl interface and avoids passing on tons of parameters. The recently introduced struct nl_info is used to pass on netlink authorship information for notifications. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-22 07:01:08 +00:00
struct fib6_config cfg = {
.fc_table = RT6_TABLE_LOCAL,
.fc_metric = IP6_RT_PRIO_ADDRCONF,
.fc_ifindex = dev->ifindex,
.fc_dst_len = 8,
.fc_flags = RTF_UP,
[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS. Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 12:47:49 +00:00
.fc_nlinfo.nl_net = dev_net(dev),
[IPv6] route: FIB6 configuration using struct fib6_config Replaces the struct in6_rtmsg based interface orignating from the ioctl interface with a struct fib6_config based on. Allows changing the interface without breaking the ioctl interface and avoids passing on tons of parameters. The recently introduced struct nl_info is used to pass on netlink authorship information for notifications. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-22 07:01:08 +00:00
};
ipv6_addr_set(&cfg.fc_dst, htonl(0xFF000000), 0, 0, 0);
ip6_route_add(&cfg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv6: use IS_ENABLED() #if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29 16:23:10 +00:00
#if IS_ENABLED(CONFIG_IPV6_SIT)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static void sit_route_add(struct net_device *dev)
{
[IPv6] route: FIB6 configuration using struct fib6_config Replaces the struct in6_rtmsg based interface orignating from the ioctl interface with a struct fib6_config based on. Allows changing the interface without breaking the ioctl interface and avoids passing on tons of parameters. The recently introduced struct nl_info is used to pass on netlink authorship information for notifications. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-22 07:01:08 +00:00
struct fib6_config cfg = {
.fc_table = RT6_TABLE_MAIN,
.fc_metric = IP6_RT_PRIO_ADDRCONF,
.fc_ifindex = dev->ifindex,
.fc_dst_len = 96,
.fc_flags = RTF_UP | RTF_NONEXTHOP,
[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS. Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 12:47:49 +00:00
.fc_nlinfo.nl_net = dev_net(dev),
[IPv6] route: FIB6 configuration using struct fib6_config Replaces the struct in6_rtmsg based interface orignating from the ioctl interface with a struct fib6_config based on. Allows changing the interface without breaking the ioctl interface and avoids passing on tons of parameters. The recently introduced struct nl_info is used to pass on netlink authorship information for notifications. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-22 07:01:08 +00:00
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* prefix length - 96 bits "::d.d.d.d" */
[IPv6] route: FIB6 configuration using struct fib6_config Replaces the struct in6_rtmsg based interface orignating from the ioctl interface with a struct fib6_config based on. Allows changing the interface without breaking the ioctl interface and avoids passing on tons of parameters. The recently introduced struct nl_info is used to pass on netlink authorship information for notifications. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-22 07:01:08 +00:00
ip6_route_add(&cfg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6]: Seperate sit driver to extra module (addrconf.c changes) This patch contains the changes to net/ipv6/addrconf.c to remove sit specific code if the sit driver is not selected. Signed-off-by: Joerg Roedel <joro-lkml@zlug.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-10 21:49:53 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static struct inet6_dev *addrconf_add_dev(struct net_device *dev)
{
struct inet6_dev *idev;
ASSERT_RTNL();
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
idev = ipv6_find_idev(dev);
if (!idev)
ipv6: Don't add routes to ipv6 disabled interfaces. If the interface has IPv6 disabled, don't add a multicast or link-local route since we won't be adding a link-local address. Reported-by: Mahesh Kelkar <maheshkelkar@gmail.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-20 10:34:30 +00:00
return ERR_PTR(-ENOBUFS);
if (idev->cnf.disable_ipv6)
return ERR_PTR(-EACCES);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Add default multicast route */
ipv6: Fix for adding multicast route for loopback device automatically. There is no obvious reason to add a default multicast route for loopback devices, otherwise there would be a route entry whose dst.error set to -ENETUNREACH that would blocking all multicast packets. ==================== [ more detailed explanation ] The problem is that the resulting routing table depends on the sequence of interface's initialization and in some situation, that would block all muticast packets. Suppose there are two interfaces on my computer (lo and eth0), if we initailize 'lo' before 'eth0', the resuting routing table(for multicast) would be # ip -6 route show | grep ff00:: unreachable ff00::/8 dev lo metric 256 error -101 ff00::/8 dev eth0 metric 256 When sending multicasting packets, routing subsystem will return the first route entry which with a error set to -101(ENETUNREACH). I know the kernel will set the default ipv6 address for 'lo' when it is up and won't set the default multicast route for it, but there is no reason to stop 'init' program from setting address for 'lo', and that is exactly what systemd did. I am sure there is something wrong with kernel or systemd, currently I preferred kernel caused this problem. ==================== Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06 21:23:45 +00:00
if (!(dev->flags & IFF_LOOPBACK))
addrconf_add_mroute(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return idev;
}
ipv6: Check RA for sllao when configuring optimistic ipv6 address (v2) Recently Dave noticed that a test we did in ipv6_add_addr to see if we next hop route for the interface we're adding an addres to was wrong (see commit 7ffbcecbeed91e5874e9a1cfc4c0cbb07dac3069). for one, it never triggers, and two, it was completely wrong to begin with. This test was meant to cover this section of RFC 4429: 3.3 Modifications to RFC 2462 Stateless Address Autoconfiguration * (modifies section 5.5) A host MAY choose to configure a new address as an Optimistic Address. A host that does not know the SLLAO of its router SHOULD NOT configure a new address as Optimistic. A router SHOULD NOT configure an Optimistic Address. This patch should bring us into proper compliance with the above clause. Since we only add a SLAAC address after we've received a RA which may or may not contain a source link layer address option, we can pass a pointer to that option to addrconf_prefix_rcv (which may be null if the option is not present), and only set the optimistic flag if the option was found in the RA. Change notes: (v2) modified the new parameter to addrconf_prefix_rcv to be a bool rather than a pointer to make its use more clear as per request from davem. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04 10:49:15 +00:00
void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len, bool sllao)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct prefix_info *pinfo;
__u32 valid_lft;
__u32 prefered_lft;
int addr_type;
struct inet6_dev *in6_dev;
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
struct net *net = dev_net(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pinfo = (struct prefix_info *) opt;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (len < sizeof(struct prefix_info)) {
ADBG(("addrconf: prefix option too short\n"));
return;
}
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Validation checks ([ADDRCONF], page 19)
*/
addr_type = ipv6_addr_type(&pinfo->prefix);
if (addr_type & (IPV6_ADDR_MULTICAST|IPV6_ADDR_LINKLOCAL))
return;
valid_lft = ntohl(pinfo->valid);
prefered_lft = ntohl(pinfo->prefered);
if (prefered_lft > valid_lft) {
net: Convert net_ratelimit uses to net_<level>_ratelimited Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13 21:56:26 +00:00
net_warn_ratelimited("addrconf: prefix option has invalid lifetime\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return;
}
in6_dev = in6_dev_get(dev);
if (in6_dev == NULL) {
net: Convert net_ratelimit uses to net_<level>_ratelimited Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13 21:56:26 +00:00
net_dbg_ratelimited("addrconf: device %s not configured\n",
dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return;
}
/*
* Two things going on here:
* 1) Add routes for on-link prefixes
* 2) Configure prefixes with the auto flag set
*/
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 08:37:49 +00:00
if (pinfo->onlink) {
struct rt6_info *rt;
unsigned long rt_expires;
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
/* Avoid arithmetic overflow. Really, we could
* save rt_expires in seconds, likely valid_lft,
* but it would require division in fib gc, that it
* not good.
*/
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 08:37:49 +00:00
if (HZ > USER_HZ)
rt_expires = addrconf_timeout_fixup(valid_lft, HZ);
else
rt_expires = addrconf_timeout_fixup(valid_lft, USER_HZ);
[IPV6]: Fix route lifetime. The route expiration time is stored in rt6i_expires in jiffies. The argument of rt6_route_add() for adding a route is not the expiration time in jiffies nor in clock_t, but the lifetime (or time left before expiration) in clock_t. Because of the confusion, we sometimes saw several strange errors (FAILs) in TAHI IPv6 Ready Logo Phase-2 Self Test. The symptoms were analyzed by Mitsuru Chinen <CHINEN@jp.ibm.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19 22:02:45 +00:00
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 08:37:49 +00:00
if (addrconf_finite_timeout(rt_expires))
rt_expires *= HZ;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6: fix route lookup in addrconf_prefix_rcv() The route lookup to find a previously auto-configured route for a prefixes used to use rt6_lookup(), with the prefix from the RA used as an address. However, that kind of lookup ignores routing tables, the prefix length and route flags, so when there were other matching routes, even in different tables and/or with a different prefix length, the wrong route would be manipulated. Now, a new function "addrconf_get_prefix_route()" is used for the route lookup, which searches in RT6_TABLE_PREFIX and takes the prefix-length and route flags into account. Signed-off-by: Andreas Hofmeister <andi@collax.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-26 03:24:29 +00:00
rt = addrconf_get_prefix_route(&pinfo->prefix,
pinfo->prefix_len,
dev,
RTF_ADDRCONF | RTF_PREFIX_RT,
RTF_GATEWAY | RTF_DEFAULT);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6: fix route lookup in addrconf_prefix_rcv() The route lookup to find a previously auto-configured route for a prefixes used to use rt6_lookup(), with the prefix from the RA used as an address. However, that kind of lookup ignores routing tables, the prefix length and route flags, so when there were other matching routes, even in different tables and/or with a different prefix length, the wrong route would be manipulated. Now, a new function "addrconf_get_prefix_route()" is used for the route lookup, which searches in RT6_TABLE_PREFIX and takes the prefix-length and route flags into account. Signed-off-by: Andreas Hofmeister <andi@collax.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-26 03:24:29 +00:00
if (rt) {
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
/* Autoconf prefix route */
if (valid_lft == 0) {
ip6_del_rt(rt);
rt = NULL;
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 08:37:49 +00:00
} else if (addrconf_finite_timeout(rt_expires)) {
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
/* not infinity */
ipv6: fix problem with expired dst cache If the ipv6 dst cache which copy from the dst generated by ICMPV6 RA packet. this dst cache will not check expire because it has no RTF_EXPIRES flag. So this dst cache will always be used until the dst gc run. Change the struct dst_entry,add a union contains new pointer from and expires. When rt6_info.rt6i_flags has no RTF_EXPIRES flag,the dst.expires has no use. we can use this field to point to where the dst cache copy from. The dst.from is only used in IPV6. rt6_check_expired check if rt6_info.dst.from is expired. ip6_rt_copy only set dst.from when the ort has flag RTF_ADDRCONF and RTF_DEFAULT.then hold the ort. ip6_dst_destroy release the ort. Add some functions to operate the RTF_EXPIRES flag and expires(from) together. and change the code to use these new adding functions. Changes from v5: modify ip6_route_add and ndisc_router_discovery to use new adding functions. Only set dst.from when the ort has flag RTF_ADDRCONF and RTF_DEFAULT.then hold the ort. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-06 00:13:10 +00:00
rt6_set_expires(rt, jiffies + rt_expires);
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
} else {
ipv6: fix problem with expired dst cache If the ipv6 dst cache which copy from the dst generated by ICMPV6 RA packet. this dst cache will not check expire because it has no RTF_EXPIRES flag. So this dst cache will always be used until the dst gc run. Change the struct dst_entry,add a union contains new pointer from and expires. When rt6_info.rt6i_flags has no RTF_EXPIRES flag,the dst.expires has no use. we can use this field to point to where the dst cache copy from. The dst.from is only used in IPV6. rt6_check_expired check if rt6_info.dst.from is expired. ip6_rt_copy only set dst.from when the ort has flag RTF_ADDRCONF and RTF_DEFAULT.then hold the ort. ip6_dst_destroy release the ort. Add some functions to operate the RTF_EXPIRES flag and expires(from) together. and change the code to use these new adding functions. Changes from v5: modify ip6_route_add and ndisc_router_discovery to use new adding functions. Only set dst.from when the ort has flag RTF_ADDRCONF and RTF_DEFAULT.then hold the ort. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-06 00:13:10 +00:00
rt6_clean_expires(rt);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
} else if (valid_lft) {
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
clock_t expires = 0;
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 08:37:49 +00:00
int flags = RTF_ADDRCONF | RTF_PREFIX_RT;
if (addrconf_finite_timeout(rt_expires)) {
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
/* not infinity */
flags |= RTF_EXPIRES;
expires = jiffies_to_clock_t(rt_expires);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
addrconf_prefix_route(&pinfo->prefix, pinfo->prefix_len,
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
dev, expires, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv6: introduce ip6_rt_put() As suggested by Eric, we could introduce a helper function for ipv6 too, to avoid checking if rt is NULL before dst_release(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29 00:13:19 +00:00
ip6_rt_put(rt);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/* Try to figure out our local address for this prefix */
if (pinfo->autoconf && in6_dev->cnf.autoconf) {
net/ipv6/addrconf.c: Checkpatch cleanups net/ipv6/addrconf.c:340: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:342: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:444: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:1337: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:1526: ERROR: "(foo*)" should be "(foo *)" net/ipv6/addrconf.c:1671: ERROR: open brace '{' following function declarations go on the next line net/ipv6/addrconf.c:1914: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2368: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2370: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2416: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2437: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2573: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:3797: ERROR: "foo* bar" should be "foo *bar" Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 07:49:08 +00:00
struct inet6_ifaddr *ifp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct in6_addr addr;
int create = 0, update_lft = 0;
if (pinfo->prefix_len == 64) {
memcpy(&addr, &pinfo->prefix, 8);
if (ipv6_generate_eui64(addr.s6_addr + 8, dev) &&
ipv6_inherit_eui64(addr.s6_addr + 8, in6_dev)) {
in6_dev_put(in6_dev);
return;
}
goto ok;
}
net: Convert net_ratelimit uses to net_<level>_ratelimited Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13 21:56:26 +00:00
net_dbg_ratelimited("IPv6 addrconf: prefix with wrong length %d\n",
pinfo->prefix_len);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_dev_put(in6_dev);
return;
ok:
ipv6 netns: Make several "global" sysctl variables namespace aware. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-20 05:35:03 +00:00
ifp = ipv6_get_ifaddr(net, &addr, dev, 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (ifp == NULL && valid_lft) {
int max_addresses = in6_dev->cnf.max_addresses;
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
u32 addr_flags = 0;
#ifdef CONFIG_IPV6_OPTIMISTIC_DAD
if (in6_dev->cnf.optimistic_dad &&
ipv6: Check RA for sllao when configuring optimistic ipv6 address (v2) Recently Dave noticed that a test we did in ipv6_add_addr to see if we next hop route for the interface we're adding an addres to was wrong (see commit 7ffbcecbeed91e5874e9a1cfc4c0cbb07dac3069). for one, it never triggers, and two, it was completely wrong to begin with. This test was meant to cover this section of RFC 4429: 3.3 Modifications to RFC 2462 Stateless Address Autoconfiguration * (modifies section 5.5) A host MAY choose to configure a new address as an Optimistic Address. A host that does not know the SLLAO of its router SHOULD NOT configure a new address as Optimistic. A router SHOULD NOT configure an Optimistic Address. This patch should bring us into proper compliance with the above clause. Since we only add a SLAAC address after we've received a RA which may or may not contain a source link layer address option, we can pass a pointer to that option to addrconf_prefix_rcv (which may be null if the option is not present), and only set the optimistic flag if the option was found in the RA. Change notes: (v2) modified the new parameter to addrconf_prefix_rcv to be a bool rather than a pointer to make its use more clear as per request from davem. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04 10:49:15 +00:00
!net->ipv6.devconf_all->forwarding && sllao)
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
addr_flags = IFA_F_OPTIMISTIC;
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Do not allow to create too much of autoconfigured
* addresses; this would be too easy way to crash kernel.
*/
if (!max_addresses ||
ipv6_count_addresses(in6_dev) < max_addresses)
ifp = ipv6_add_addr(in6_dev, &addr, pinfo->prefix_len,
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
addr_type&IPV6_ADDR_SCOPE_MASK,
addr_flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6: Use IS_ERR_OR_NULL(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-22 06:32:54 +00:00
if (IS_ERR_OR_NULL(ifp)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_dev_put(in6_dev);
return;
}
update_lft = create = 1;
ifp->cstamp = jiffies;
ipv6: Remove unused argument to addrconf_dad_start(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 01:37:40 +00:00
addrconf_dad_start(ifp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
if (ifp) {
int flags;
unsigned long now;
#ifdef CONFIG_IPV6_PRIVACY
struct inet6_ifaddr *ift;
#endif
u32 stored_lft;
/* update lifetime (RFC2462 5.5.3 e) */
spin_lock(&ifp->lock);
now = jiffies;
if (ifp->valid_lft > (now - ifp->tstamp) / HZ)
stored_lft = ifp->valid_lft - (now - ifp->tstamp) / HZ;
else
stored_lft = 0;
if (!update_lft && stored_lft) {
if (valid_lft > MIN_VALID_LIFETIME ||
valid_lft > stored_lft)
update_lft = 1;
else if (stored_lft <= MIN_VALID_LIFETIME) {
/* valid_lft <= stored_lft is always true */
IPv6: preferred lifetime of address not getting updated There's a bug in addrconf_prefix_rcv() where it won't update the preferred lifetime of an IPv6 address if the current valid lifetime of the address is less than 2 hours (the minimum value in the RA). For example, If I send a router advertisement with a prefix that has valid lifetime = preferred lifetime = 2 hours we'll build this address: 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:1890:1109:a20:217:8ff:fe7d:4718/64 scope global dynamic valid_lft 7175sec preferred_lft 7175sec If I then send the same prefix with valid lifetime = preferred lifetime = 0 it will be ignored since the minimum valid lifetime is 2 hours: 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:1890:1109:a20:217:8ff:fe7d:4718/64 scope global dynamic valid_lft 7161sec preferred_lft 7161sec But according to RFC 4862 we should always reset the preferred lifetime even if the valid lifetime is invalid, which would cause the address to immediately get deprecated. So with this patch we'd see this: 5: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:1890:1109:a20:21f:29ff:fe5a:ef04/64 scope global deprecated dynamic valid_lft 7163sec preferred_lft 0sec The comment winds-up being 5x the size of the code to fix the problem. Update the preferred lifetime of IPv6 addresses derived from a prefix info option in a router advertisement even if the valid lifetime in the option is invalid, as specified in RFC 4862 Section 5.5.3e. Fixes an issue where an address will not immediately become deprecated. Reported by Jens Rosenboom. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-02 07:10:52 +00:00
/*
* RFC 4862 Section 5.5.3e:
* "Note that the preferred lifetime of
* the corresponding address is always
* reset to the Preferred Lifetime in
* the received Prefix Information
* option, regardless of whether the
* valid lifetime is also reset or
* ignored."
*
* So if the preferred lifetime in
* this advertisement is different
* than what we have stored, but the
* valid lifetime is invalid, just
* reset prefered_lft.
*
* We must set the valid lifetime
* to the stored lifetime since we'll
* be updating the timestamp below,
* else we'll set it back to the
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 01:57:33 +00:00
* minimum.
IPv6: preferred lifetime of address not getting updated There's a bug in addrconf_prefix_rcv() where it won't update the preferred lifetime of an IPv6 address if the current valid lifetime of the address is less than 2 hours (the minimum value in the RA). For example, If I send a router advertisement with a prefix that has valid lifetime = preferred lifetime = 2 hours we'll build this address: 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:1890:1109:a20:217:8ff:fe7d:4718/64 scope global dynamic valid_lft 7175sec preferred_lft 7175sec If I then send the same prefix with valid lifetime = preferred lifetime = 0 it will be ignored since the minimum valid lifetime is 2 hours: 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:1890:1109:a20:217:8ff:fe7d:4718/64 scope global dynamic valid_lft 7161sec preferred_lft 7161sec But according to RFC 4862 we should always reset the preferred lifetime even if the valid lifetime is invalid, which would cause the address to immediately get deprecated. So with this patch we'd see this: 5: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:1890:1109:a20:21f:29ff:fe5a:ef04/64 scope global deprecated dynamic valid_lft 7163sec preferred_lft 0sec The comment winds-up being 5x the size of the code to fix the problem. Update the preferred lifetime of IPv6 addresses derived from a prefix info option in a router advertisement even if the valid lifetime in the option is invalid, as specified in RFC 4862 Section 5.5.3e. Fixes an issue where an address will not immediately become deprecated. Reported by Jens Rosenboom. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-02 07:10:52 +00:00
*/
if (prefered_lft != ifp->prefered_lft) {
valid_lft = stored_lft;
update_lft = 1;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
} else {
valid_lft = MIN_VALID_LIFETIME;
if (valid_lft < prefered_lft)
prefered_lft = valid_lft;
update_lft = 1;
}
}
if (update_lft) {
ifp->valid_lft = valid_lft;
ifp->prefered_lft = prefered_lft;
ifp->tstamp = now;
flags = ifp->flags;
ifp->flags &= ~IFA_F_DEPRECATED;
spin_unlock(&ifp->lock);
if (!(flags&IFA_F_TENTATIVE))
ipv6_ifa_notify(0, ifp);
} else
spin_unlock(&ifp->lock);
#ifdef CONFIG_IPV6_PRIVACY
read_lock_bh(&in6_dev->lock);
/* update all temporary addresses in the list */
ipv6: updates to privacy addresses per RFC 4941. Update the code to handle some of the differences between RFC 3041 and RFC 4941, which obsoletes it. Also a couple of janitorial fixes. - Allow router advertisements to increase the lifetime of temporary addresses. This was not allowed by RFC 3041, but is specified by RFC 4941. It is useful when RA lifetimes are lower than TEMP_{VALID,PREFERRED}_LIFETIME: in this case, the previous code would delete or deprecate addresses prematurely. - Change the default of MAX_RETRY to 3 per RFC 4941. - Add a comment to clarify that the preferred and valid lifetimes in inet6_ifaddr are relative to the timestamp. - Shorten lines to 80 characters in a couple of places. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26 13:50:49 +00:00
list_for_each_entry(ift, &in6_dev->tempaddr_list,
tmp_list) {
int age, max_valid, max_prefered;
IPv6: only update the lifetime of the relevant temporary address When receiving a prefix information from a routeur, only update the lifetimes of the temporary address associated with that prefix. Otherwise if one deprecated prefix is advertized, all your temporary addresses will become deprecated. Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02 07:00:58 +00:00
if (ifp != ift->ifpub)
continue;
ipv6: updates to privacy addresses per RFC 4941. Update the code to handle some of the differences between RFC 3041 and RFC 4941, which obsoletes it. Also a couple of janitorial fixes. - Allow router advertisements to increase the lifetime of temporary addresses. This was not allowed by RFC 3041, but is specified by RFC 4941. It is useful when RA lifetimes are lower than TEMP_{VALID,PREFERRED}_LIFETIME: in this case, the previous code would delete or deprecate addresses prematurely. - Change the default of MAX_RETRY to 3 per RFC 4941. - Add a comment to clarify that the preferred and valid lifetimes in inet6_ifaddr are relative to the timestamp. - Shorten lines to 80 characters in a couple of places. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26 13:50:49 +00:00
/*
* RFC 4941 section 3.3:
* If a received option will extend the lifetime
* of a public address, the lifetimes of
* temporary addresses should be extended,
* subject to the overall constraint that no
* temporary addresses should ever remain
* "valid" or "preferred" for a time longer than
* (TEMP_VALID_LIFETIME) or
* (TEMP_PREFERRED_LIFETIME - DESYNC_FACTOR),
* respectively.
*/
age = (now - ift->cstamp) / HZ;
max_valid = in6_dev->cnf.temp_valid_lft - age;
if (max_valid < 0)
max_valid = 0;
max_prefered = in6_dev->cnf.temp_prefered_lft -
in6_dev->cnf.max_desync_factor -
age;
if (max_prefered < 0)
max_prefered = 0;
if (valid_lft > max_valid)
valid_lft = max_valid;
if (prefered_lft > max_prefered)
prefered_lft = max_prefered;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_lock(&ift->lock);
flags = ift->flags;
ipv6: updates to privacy addresses per RFC 4941. Update the code to handle some of the differences between RFC 3041 and RFC 4941, which obsoletes it. Also a couple of janitorial fixes. - Allow router advertisements to increase the lifetime of temporary addresses. This was not allowed by RFC 3041, but is specified by RFC 4941. It is useful when RA lifetimes are lower than TEMP_{VALID,PREFERRED}_LIFETIME: in this case, the previous code would delete or deprecate addresses prematurely. - Change the default of MAX_RETRY to 3 per RFC 4941. - Add a comment to clarify that the preferred and valid lifetimes in inet6_ifaddr are relative to the timestamp. - Shorten lines to 80 characters in a couple of places. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26 13:50:49 +00:00
ift->valid_lft = valid_lft;
ift->prefered_lft = prefered_lft;
ift->tstamp = now;
if (prefered_lft > 0)
ift->flags &= ~IFA_F_DEPRECATED;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_unlock(&ift->lock);
if (!(flags&IFA_F_TENTATIVE))
ipv6_ifa_notify(0, ift);
}
IPv6: Create temporary address if none exists. If privacy extentions are enabled, but no current temporary address exists, then create one when we get a router advertisement. Signed-off-by: Glenn Wurster <gwurster@scs.carleton.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27 07:04:30 +00:00
if ((create || list_empty(&in6_dev->tempaddr_list)) && in6_dev->cnf.use_tempaddr > 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
ipv6: updates to privacy addresses per RFC 4941. Update the code to handle some of the differences between RFC 3041 and RFC 4941, which obsoletes it. Also a couple of janitorial fixes. - Allow router advertisements to increase the lifetime of temporary addresses. This was not allowed by RFC 3041, but is specified by RFC 4941. It is useful when RA lifetimes are lower than TEMP_{VALID,PREFERRED}_LIFETIME: in this case, the previous code would delete or deprecate addresses prematurely. - Change the default of MAX_RETRY to 3 per RFC 4941. - Add a comment to clarify that the preferred and valid lifetimes in inet6_ifaddr are relative to the timestamp. - Shorten lines to 80 characters in a couple of places. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26 13:50:49 +00:00
* When a new public address is created as
* described in [ADDRCONF], also create a new
* temporary address. Also create a temporary
* address if it's enabled but no temporary
* address currently exists.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
read_unlock_bh(&in6_dev->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6_create_tempaddr(ifp, NULL);
} else {
read_unlock_bh(&in6_dev->lock);
}
#endif
in6_ifa_put(ifp);
addrconf_verify(0);
}
}
inet6_prefix_notify(RTM_NEWPREFIX, in6_dev, pinfo);
in6_dev_put(in6_dev);
}
/*
* Set destination address.
* Special case for SIT interfaces where we create a new "virtual"
* device.
*/
[NETNS][IPV6] addrconf - Pass the proper network namespace parameters to addrconf This patch propagates the network namespace pointer to the address configuration routines which need it, which means adding a new parameter to these functions, and make them use it instead of using the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:46:57 +00:00
int addrconf_set_dstaddr(struct net *net, void __user *arg)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct in6_ifreq ireq;
struct net_device *dev;
int err = -EINVAL;
rtnl_lock();
err = -EFAULT;
if (copy_from_user(&ireq, arg, sizeof(struct in6_ifreq)))
goto err_exit;
[NETNS][IPV6] addrconf - Pass the proper network namespace parameters to addrconf This patch propagates the network namespace pointer to the address configuration routines which need it, which means adding a new parameter to these functions, and make them use it instead of using the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:46:57 +00:00
dev = __dev_get_by_index(net, ireq.ifr6_ifindex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
err = -ENODEV;
if (dev == NULL)
goto err_exit;
ipv6: use IS_ENABLED() #if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29 16:23:10 +00:00
#if IS_ENABLED(CONFIG_IPV6_SIT)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (dev->type == ARPHRD_SIT) {
ip: convert to net_device_ops for ioctl Convert to net_device_ops function table pointer for ioctl. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 05:52:05 +00:00
const struct net_device_ops *ops = dev->netdev_ops;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct ifreq ifr;
struct ip_tunnel_parm p;
err = -EADDRNOTAVAIL;
if (!(ipv6_addr_type(&ireq.ifr6_addr) & IPV6_ADDR_COMPATv4))
goto err_exit;
memset(&p, 0, sizeof(p));
p.iph.daddr = ireq.ifr6_addr.s6_addr32[3];
p.iph.saddr = 0;
p.iph.version = 4;
p.iph.ihl = 5;
p.iph.protocol = IPPROTO_IPV6;
p.iph.ttl = 64;
[IPV6]: addrconf sparse warnings Get rid of a couple of sparse warnings in IPV6 addrconf code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-21 08:48:43 +00:00
ifr.ifr_ifru.ifru_data = (__force void __user *)&p;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ip: convert to net_device_ops for ioctl Convert to net_device_ops function table pointer for ioctl. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 05:52:05 +00:00
if (ops->ndo_do_ioctl) {
mm_segment_t oldfs = get_fs();
set_fs(KERNEL_DS);
err = ops->ndo_do_ioctl(dev, &ifr, SIOCADDTUNNEL);
set_fs(oldfs);
} else
err = -EOPNOTSUPP;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (err == 0) {
err = -ENOBUFS;
[NETNS][IPV6] addrconf - Pass the proper network namespace parameters to addrconf This patch propagates the network namespace pointer to the address configuration routines which need it, which means adding a new parameter to these functions, and make them use it instead of using the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:46:57 +00:00
dev = __dev_get_by_name(net, p.name);
if (!dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto err_exit;
err = dev_open(dev);
}
}
[IPV6]: Seperate sit driver to extra module (addrconf.c changes) This patch contains the changes to net/ipv6/addrconf.c to remove sit specific code if the sit driver is not selected. Signed-off-by: Joerg Roedel <joro-lkml@zlug.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-10 21:49:53 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
err_exit:
rtnl_unlock();
return err;
}
/*
* Manual configuration of address on an interface
*/
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 04:53:02 +00:00
static int inet6_addr_add(struct net *net, int ifindex, const struct in6_addr *pfx,
[IPV6] ADDRCONF: Check range of prefix length As of now, the prefix length is not vaildated when adding or deleting addresses. The value is passed directly into the inet6_ifaddr structure and later passed on to memcmp() as length indicator which relies on the value never to exceed 128 (bits). Due to the missing check, the currently code allows for any 8 bit value to be passed on as prefix length while using the netlink interface, and any 32 bit value while using the ioctl interface. [Use unsigned int instead to generate better code - yoshfuji] Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-28 14:54:22 +00:00
unsigned int plen, __u8 ifa_flags, __u32 prefered_lft,
[NETNS][IPV6] addrconf - Pass the proper network namespace parameters to addrconf This patch propagates the network namespace pointer to the address configuration routines which need it, which means adding a new parameter to these functions, and make them use it instead of using the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:46:57 +00:00
__u32 valid_lft)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct inet6_ifaddr *ifp;
struct inet6_dev *idev;
struct net_device *dev;
int scope;
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
u32 flags;
clock_t expires;
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 08:37:49 +00:00
unsigned long timeout;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ASSERT_RTNL();
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
[IPV6] ADDRCONF: Check range of prefix length As of now, the prefix length is not vaildated when adding or deleting addresses. The value is passed directly into the inet6_ifaddr structure and later passed on to memcmp() as length indicator which relies on the value never to exceed 128 (bits). Due to the missing check, the currently code allows for any 8 bit value to be passed on as prefix length while using the netlink interface, and any 32 bit value while using the ioctl interface. [Use unsigned int instead to generate better code - yoshfuji] Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-28 14:54:22 +00:00
if (plen > 128)
return -EINVAL;
[IPV6] ADDRCONF: Allow user-space to specify address lifetime Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:10 +00:00
/* check the lifetime */
if (!valid_lft || prefered_lft > valid_lft)
return -EINVAL;
[NETNS][IPV6] addrconf - Pass the proper network namespace parameters to addrconf This patch propagates the network namespace pointer to the address configuration routines which need it, which means adding a new parameter to these functions, and make them use it instead of using the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:46:57 +00:00
dev = __dev_get_by_index(net, ifindex);
if (!dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -ENODEV;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
ipv6: Don't add routes to ipv6 disabled interfaces. If the interface has IPv6 disabled, don't add a multicast or link-local route since we won't be adding a link-local address. Reported-by: Mahesh Kelkar <maheshkelkar@gmail.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-20 10:34:30 +00:00
idev = addrconf_add_dev(dev);
if (IS_ERR(idev))
return PTR_ERR(idev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
scope = ipv6_addr_scope(pfx);
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 08:37:49 +00:00
timeout = addrconf_timeout_fixup(valid_lft, HZ);
if (addrconf_finite_timeout(timeout)) {
expires = jiffies_to_clock_t(timeout * HZ);
valid_lft = timeout;
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
flags = RTF_EXPIRES;
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 08:37:49 +00:00
} else {
expires = 0;
flags = 0;
ifa_flags |= IFA_F_PERMANENT;
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
}
[IPV6] ADDRCONF: Allow user-space to specify address lifetime Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:10 +00:00
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 08:37:49 +00:00
timeout = addrconf_timeout_fixup(prefered_lft, HZ);
if (addrconf_finite_timeout(timeout)) {
if (timeout == 0)
ifa_flags |= IFA_F_DEPRECATED;
prefered_lft = timeout;
}
[IPV6] ADDRCONF: Allow user-space to specify address lifetime Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:10 +00:00
ifp = ipv6_add_addr(idev, pfx, plen, scope, ifa_flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!IS_ERR(ifp)) {
[IPV6]: The ifa lock is a BH lock The ifa lock is expected to be taken in BH context (by addrconf timers) so we must disable BH when accessing it from user context. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-09 23:52:04 +00:00
spin_lock_bh(&ifp->lock);
[IPV6] ADDRCONF: Allow user-space to specify address lifetime Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:10 +00:00
ifp->valid_lft = valid_lft;
ifp->prefered_lft = prefered_lft;
ifp->tstamp = jiffies;
[IPV6]: The ifa lock is a BH lock The ifa lock is expected to be taken in BH context (by addrconf timers) so we must disable BH when accessing it from user context. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-09 23:52:04 +00:00
spin_unlock_bh(&ifp->lock);
[IPV6] ADDRCONF: Allow user-space to specify address lifetime Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:10 +00:00
[IPV6] ADDRCONF: Manage prefix route corresponding to address manually added. It is more natural to manage prefix routes corresponding to address which is being added manually. With help from Masafumi Aramoto <aramoto@linux-ipv6.org>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-02-07 11:36:26 +00:00
addrconf_prefix_route(&ifp->addr, ifp->prefix_len, dev,
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
expires, flags);
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
/*
* Note that section 3.1 of RFC 4429 indicates
* that the Optimistic flag should not be set for
* manually configured addresses
*/
ipv6: Remove unused argument to addrconf_dad_start(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 01:37:40 +00:00
addrconf_dad_start(ifp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_ifa_put(ifp);
[IPV6] ADDRCONF: Allow user-space to specify address lifetime Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:10 +00:00
addrconf_verify(0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return 0;
}
return PTR_ERR(ifp);
}
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 04:53:02 +00:00
static int inet6_addr_del(struct net *net, int ifindex, const struct in6_addr *pfx,
[IPV6] ADDRCONF: Check range of prefix length As of now, the prefix length is not vaildated when adding or deleting addresses. The value is passed directly into the inet6_ifaddr structure and later passed on to memcmp() as length indicator which relies on the value never to exceed 128 (bits). Due to the missing check, the currently code allows for any 8 bit value to be passed on as prefix length while using the netlink interface, and any 32 bit value while using the ioctl interface. [Use unsigned int instead to generate better code - yoshfuji] Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-28 14:54:22 +00:00
unsigned int plen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct inet6_ifaddr *ifp;
struct inet6_dev *idev;
struct net_device *dev;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
[IPV6] ADDRCONF: Check range of prefix length As of now, the prefix length is not vaildated when adding or deleting addresses. The value is passed directly into the inet6_ifaddr structure and later passed on to memcmp() as length indicator which relies on the value never to exceed 128 (bits). Due to the missing check, the currently code allows for any 8 bit value to be passed on as prefix length while using the netlink interface, and any 32 bit value while using the ioctl interface. [Use unsigned int instead to generate better code - yoshfuji] Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-28 14:54:22 +00:00
if (plen > 128)
return -EINVAL;
[NETNS][IPV6] addrconf - Pass the proper network namespace parameters to addrconf This patch propagates the network namespace pointer to the address configuration routines which need it, which means adding a new parameter to these functions, and make them use it instead of using the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:46:57 +00:00
dev = __dev_get_by_index(net, ifindex);
if (!dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -ENODEV;
if ((idev = __in6_dev_get(dev)) == NULL)
return -ENXIO;
read_lock_bh(&idev->lock);
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
list_for_each_entry(ifp, &idev->addr_list, if_list) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (ifp->prefix_len == plen &&
ipv6_addr_equal(pfx, &ifp->addr)) {
in6_ifa_hold(ifp);
read_unlock_bh(&idev->lock);
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6_del_addr(ifp);
/* If the last address is deleted administratively,
disable IPv6 on this interface.
*/
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
if (list_empty(&idev->addr_list))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
addrconf_ifdown(idev->dev, 1);
return 0;
}
}
read_unlock_bh(&idev->lock);
return -EADDRNOTAVAIL;
}
[NETNS][IPV6] addrconf - Pass the proper network namespace parameters to addrconf This patch propagates the network namespace pointer to the address configuration routines which need it, which means adding a new parameter to these functions, and make them use it instead of using the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:46:57 +00:00
int addrconf_add_ifaddr(struct net *net, void __user *arg)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct in6_ifreq ireq;
int err;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
net: Allow userns root to control ipv6 Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow the SIOCSIFADDR ioctl to add ipv6 addresses. Allow the SIOCDIFADDR ioctl to delete ipv6 addresses. Allow the SIOCADDRT ioctl to add ipv6 routes. Allow the SIOCDELRT ioctl to delete ipv6 routes. Allow creation of ipv6 raw sockets. Allow setting the IPV6_JOIN_ANYCAST socket option. Allow setting the IPV6_FL_A_RENEW parameter of the IPV6_FLOWLABEL_MGR socket option. Allow setting the IPV6_TRANSPARENT socket option. Allow setting the IPV6_HOPOPTS socket option. Allow setting the IPV6_RTHDRDSTOPTS socket option. Allow setting the IPV6_DSTOPTS socket option. Allow setting the IPV6_IPSEC_POLICY socket option. Allow setting the IPV6_XFRM_POLICY socket option. Allow sending packets with the IPV6_2292HOPOPTS control message. Allow sending packets with the IPV6_2292DSTOPTS control message. Allow sending packets with the IPV6_RTHDRDSTOPTS control message. Allow setting the multicast routing socket options on non multicast routing sockets. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, and SIOCDELTUNNEL ioctls for setting up, changing and deleting tunnels over ipv6. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, SIOCDELTUNNEL ioctls for setting up, changing and deleting ipv6 over ipv4 tunnels. Allow the SIOCADDPRL, SIOCDELPRL, SIOCCHGPRL ioctls for adding, deleting, and changing the potential router list for ISATAP tunnels. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-16 03:03:06 +00:00
if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EPERM;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (copy_from_user(&ireq, arg, sizeof(struct in6_ifreq)))
return -EFAULT;
rtnl_lock();
[NETNS][IPV6] addrconf - Pass the proper network namespace parameters to addrconf This patch propagates the network namespace pointer to the address configuration routines which need it, which means adding a new parameter to these functions, and make them use it instead of using the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:46:57 +00:00
err = inet6_addr_add(net, ireq.ifr6_ifindex, &ireq.ifr6_addr,
ireq.ifr6_prefixlen, IFA_F_PERMANENT,
INFINITY_LIFE_TIME, INFINITY_LIFE_TIME);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
rtnl_unlock();
return err;
}
[NETNS][IPV6] addrconf - Pass the proper network namespace parameters to addrconf This patch propagates the network namespace pointer to the address configuration routines which need it, which means adding a new parameter to these functions, and make them use it instead of using the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:46:57 +00:00
int addrconf_del_ifaddr(struct net *net, void __user *arg)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct in6_ifreq ireq;
int err;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
net: Allow userns root to control ipv6 Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow the SIOCSIFADDR ioctl to add ipv6 addresses. Allow the SIOCDIFADDR ioctl to delete ipv6 addresses. Allow the SIOCADDRT ioctl to add ipv6 routes. Allow the SIOCDELRT ioctl to delete ipv6 routes. Allow creation of ipv6 raw sockets. Allow setting the IPV6_JOIN_ANYCAST socket option. Allow setting the IPV6_FL_A_RENEW parameter of the IPV6_FLOWLABEL_MGR socket option. Allow setting the IPV6_TRANSPARENT socket option. Allow setting the IPV6_HOPOPTS socket option. Allow setting the IPV6_RTHDRDSTOPTS socket option. Allow setting the IPV6_DSTOPTS socket option. Allow setting the IPV6_IPSEC_POLICY socket option. Allow setting the IPV6_XFRM_POLICY socket option. Allow sending packets with the IPV6_2292HOPOPTS control message. Allow sending packets with the IPV6_2292DSTOPTS control message. Allow sending packets with the IPV6_RTHDRDSTOPTS control message. Allow setting the multicast routing socket options on non multicast routing sockets. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, and SIOCDELTUNNEL ioctls for setting up, changing and deleting tunnels over ipv6. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, SIOCDELTUNNEL ioctls for setting up, changing and deleting ipv6 over ipv4 tunnels. Allow the SIOCADDPRL, SIOCDELPRL, SIOCCHGPRL ioctls for adding, deleting, and changing the potential router list for ISATAP tunnels. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-16 03:03:06 +00:00
if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EPERM;
if (copy_from_user(&ireq, arg, sizeof(struct in6_ifreq)))
return -EFAULT;
rtnl_lock();
[NETNS][IPV6] addrconf - Pass the proper network namespace parameters to addrconf This patch propagates the network namespace pointer to the address configuration routines which need it, which means adding a new parameter to these functions, and make them use it instead of using the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:46:57 +00:00
err = inet6_addr_del(net, ireq.ifr6_ifindex, &ireq.ifr6_addr,
ireq.ifr6_prefixlen);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
rtnl_unlock();
return err;
}
ipv6/addrconf: common code located $ codiff net/ipv6/addrconf.o net/ipv6/addrconf.o.new net/ipv6/addrconf.c: addrconf_notify | -267 1 function changed, 267 bytes removed net/ipv6/addrconf.c: add_addr | +86 1 function changed, 86 bytes added net/ipv6/addrconf.o.new: 2 functions changed, 86 bytes added, 267 bytes removed, diff: -181 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07 07:48:01 +00:00
static void add_addr(struct inet6_dev *idev, const struct in6_addr *addr,
int plen, int scope)
{
struct inet6_ifaddr *ifp;
ifp = ipv6_add_addr(idev, addr, plen, scope, IFA_F_PERMANENT);
if (!IS_ERR(ifp)) {
spin_lock_bh(&ifp->lock);
ifp->flags &= ~IFA_F_TENTATIVE;
spin_unlock_bh(&ifp->lock);
ipv6_ifa_notify(RTM_NEWADDR, ifp);
in6_ifa_put(ifp);
}
}
ipv6: use IS_ENABLED() #if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29 16:23:10 +00:00
#if IS_ENABLED(CONFIG_IPV6_SIT)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static void sit_add_v4_addrs(struct inet6_dev *idev)
{
struct in6_addr addr;
struct net_device *dev;
[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS. Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 12:47:49 +00:00
struct net *net = dev_net(idev->dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int scope;
ASSERT_RTNL();
memset(&addr, 0, sizeof(struct in6_addr));
memcpy(&addr.s6_addr32[3], idev->dev->dev_addr, 4);
if (idev->dev->flags&IFF_POINTOPOINT) {
addr.s6_addr32[0] = htonl(0xfe800000);
scope = IFA_LINK;
} else {
scope = IPV6_ADDR_COMPATv4;
}
if (addr.s6_addr32[3]) {
ipv6/addrconf: common code located $ codiff net/ipv6/addrconf.o net/ipv6/addrconf.o.new net/ipv6/addrconf.c: addrconf_notify | -267 1 function changed, 267 bytes removed net/ipv6/addrconf.c: add_addr | +86 1 function changed, 86 bytes added net/ipv6/addrconf.o.new: 2 functions changed, 86 bytes added, 267 bytes removed, diff: -181 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07 07:48:01 +00:00
add_addr(idev, &addr, 128, scope);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return;
}
[NETNS][IPV6] addrconf - make addrconf per namespace All the infrastructure to propagate the network namespace information is ready. Make use of it. There is a special case here between the initial network namespace and the other namespaces: * When ipv6 is initialized at boot time (aka in the init_net), it registers to the notifier callback. So addrconf_notify will be called as many time as there are network devices setup on the system and the function will add ipv6 addresses to the network devices. But the first device which needs to have its ipv6 address setup is the loopback, unfortunatly this is not the case. So the loopback address is setup manually in the ipv6 init function. * With the network namespace, this ordering problem does not appears because notifier is already setup and active, so as soon as we register the loopback the ipv6 address is setup and it will be the first device. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:47:47 +00:00
for_each_netdev(net, dev) {
net/ipv6/addrconf.c: Checkpatch cleanups net/ipv6/addrconf.c:340: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:342: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:444: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:1337: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:1526: ERROR: "(foo*)" should be "(foo *)" net/ipv6/addrconf.c:1671: ERROR: open brace '{' following function declarations go on the next line net/ipv6/addrconf.c:1914: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2368: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2370: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2416: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2437: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2573: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:3797: ERROR: "foo* bar" should be "foo *bar" Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 07:49:08 +00:00
struct in_device *in_dev = __in_dev_get_rtnl(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (in_dev && (dev->flags & IFF_UP)) {
net/ipv6/addrconf.c: Checkpatch cleanups net/ipv6/addrconf.c:340: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:342: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:444: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:1337: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:1526: ERROR: "(foo*)" should be "(foo *)" net/ipv6/addrconf.c:1671: ERROR: open brace '{' following function declarations go on the next line net/ipv6/addrconf.c:1914: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2368: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2370: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2416: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2437: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2573: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:3797: ERROR: "foo* bar" should be "foo *bar" Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 07:49:08 +00:00
struct in_ifaddr *ifa;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int flag = scope;
for (ifa = in_dev->ifa_list; ifa; ifa = ifa->ifa_next) {
int plen;
addr.s6_addr32[3] = ifa->ifa_local;
if (ifa->ifa_scope == RT_SCOPE_LINK)
continue;
if (ifa->ifa_scope >= RT_SCOPE_HOST) {
if (idev->dev->flags&IFF_POINTOPOINT)
continue;
flag |= IFA_HOST;
}
if (idev->dev->flags&IFF_POINTOPOINT)
plen = 64;
else
plen = 96;
ipv6/addrconf: common code located $ codiff net/ipv6/addrconf.o net/ipv6/addrconf.o.new net/ipv6/addrconf.c: addrconf_notify | -267 1 function changed, 267 bytes removed net/ipv6/addrconf.c: add_addr | +86 1 function changed, 86 bytes added net/ipv6/addrconf.o.new: 2 functions changed, 86 bytes added, 267 bytes removed, diff: -181 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07 07:48:01 +00:00
add_addr(idev, &addr, plen, flag);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6]: Seperate sit driver to extra module (addrconf.c changes) This patch contains the changes to net/ipv6/addrconf.c to remove sit specific code if the sit driver is not selected. Signed-off-by: Joerg Roedel <joro-lkml@zlug.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-10 21:49:53 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static void init_loopback(struct net_device *dev)
{
struct inet6_dev *idev;
/* ::1 */
ASSERT_RTNL();
if ((idev = ipv6_find_idev(dev)) == NULL) {
net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debug Use the current debugging style and enable dynamic_debug. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:54 +00:00
pr_debug("%s: add_dev failed\n", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return;
}
ipv6/addrconf: common code located $ codiff net/ipv6/addrconf.o net/ipv6/addrconf.o.new net/ipv6/addrconf.c: addrconf_notify | -267 1 function changed, 267 bytes removed net/ipv6/addrconf.c: add_addr | +86 1 function changed, 86 bytes added net/ipv6/addrconf.o.new: 2 functions changed, 86 bytes added, 267 bytes removed, diff: -181 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07 07:48:01 +00:00
add_addr(idev, &in6addr_loopback, 128, IFA_HOST);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 04:53:02 +00:00
static void addrconf_add_linklocal(struct inet6_dev *idev, const struct in6_addr *addr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
net/ipv6/addrconf.c: Checkpatch cleanups net/ipv6/addrconf.c:340: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:342: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:444: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:1337: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:1526: ERROR: "(foo*)" should be "(foo *)" net/ipv6/addrconf.c:1671: ERROR: open brace '{' following function declarations go on the next line net/ipv6/addrconf.c:1914: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2368: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2370: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2416: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2437: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2573: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:3797: ERROR: "foo* bar" should be "foo *bar" Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 07:49:08 +00:00
struct inet6_ifaddr *ifp;
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
u32 addr_flags = IFA_F_PERMANENT;
#ifdef CONFIG_IPV6_OPTIMISTIC_DAD
if (idev->cnf.optimistic_dad &&
ipv6: Fix warning in addrconf code. Reported by Linus. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-21 01:17:02 +00:00
!dev_net(idev->dev)->ipv6.devconf_all->forwarding)
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
addr_flags |= IFA_F_OPTIMISTIC;
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
ifp = ipv6_add_addr(idev, addr, 64, IFA_LINK, addr_flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!IS_ERR(ifp)) {
[IPV6] ADDRCONF: Manage prefix route corresponding to address manually added. It is more natural to manage prefix routes corresponding to address which is being added manually. With help from Masafumi Aramoto <aramoto@linux-ipv6.org>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-02-07 11:36:26 +00:00
addrconf_prefix_route(&ifp->addr, ifp->prefix_len, idev->dev, 0, 0);
ipv6: Remove unused argument to addrconf_dad_start(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 01:37:40 +00:00
addrconf_dad_start(ifp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_ifa_put(ifp);
}
}
static void addrconf_dev_config(struct net_device *dev)
{
struct in6_addr addr;
net/ipv6/addrconf.c: Checkpatch cleanups net/ipv6/addrconf.c:340: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:342: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:444: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:1337: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:1526: ERROR: "(foo*)" should be "(foo *)" net/ipv6/addrconf.c:1671: ERROR: open brace '{' following function declarations go on the next line net/ipv6/addrconf.c:1914: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2368: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2370: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2416: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2437: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2573: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:3797: ERROR: "foo* bar" should be "foo *bar" Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 07:49:08 +00:00
struct inet6_dev *idev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ASSERT_RTNL();
[IPV6] addrconf: Fix IPv6 on tuntap tunnels The recent patch that added ipv6_hwtype is broken on tuntap tunnels. Indeed, it's broken on any device that does not pass the ipv6_hwtype test. The reason is that the original test only applies to autoconfiguration, not IPv6 support. IPv6 support is allowed on any device. In fact, even with the ipv6_hwtype patch applied you can still add IPv6 addresses to any interface that doesn't pass thw ipv6_hwtype test provided that they have a sufficiently large MTU. This is a serious problem because come deregistration time these devices won't be cleaned up properly. I've gone back and looked at the rationale for the patch. It appears that the real problem is that we were creating IPv6 devices even if the MTU was too small. So here's a patch which fixes that and reverts the ipv6_hwtype stuff. Thanks to Kanru Chen for reporting this issue. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-14 20:02:55 +00:00
if ((dev->type != ARPHRD_ETHER) &&
(dev->type != ARPHRD_FDDI) &&
(dev->type != ARPHRD_ARCNET) &&
6lowpan: IPv6 link local address According to the RFC4944 (Transmission of IPv6 Packets over IEEE 802.15.4 Networks), chapter 7: The IPv6 link-local address [RFC4291] for an IEEE 802.15.4 interface is formed by appending the Interface Identifier, as defined above, to the prefix FE80::/64. 10 bits 54 bits 64 bits +----------+-----------------------+----------------------------+ |1111111010| (zeros) | Interface Identifier | +----------+-----------------------+----------------------------+ This patch adds IPv6 address generation support for the 6lowpan interfaces. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 03:25:52 +00:00
(dev->type != ARPHRD_INFINIBAND) &&
(dev->type != ARPHRD_IEEE802154)) {
[IPV6] addrconf: Fix IPv6 on tuntap tunnels The recent patch that added ipv6_hwtype is broken on tuntap tunnels. Indeed, it's broken on any device that does not pass the ipv6_hwtype test. The reason is that the original test only applies to autoconfiguration, not IPv6 support. IPv6 support is allowed on any device. In fact, even with the ipv6_hwtype patch applied you can still add IPv6 addresses to any interface that doesn't pass thw ipv6_hwtype test provided that they have a sufficiently large MTU. This is a serious problem because come deregistration time these devices won't be cleaned up properly. I've gone back and looked at the rationale for the patch. It appears that the real problem is that we were creating IPv6 devices even if the MTU was too small. So here's a patch which fixes that and reverts the ipv6_hwtype stuff. Thanks to Kanru Chen for reporting this issue. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-14 20:02:55 +00:00
/* Alas, we support only Ethernet autoconfiguration. */
return;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
idev = addrconf_add_dev(dev);
ipv6: Don't add routes to ipv6 disabled interfaces. If the interface has IPv6 disabled, don't add a multicast or link-local route since we won't be adding a link-local address. Reported-by: Mahesh Kelkar <maheshkelkar@gmail.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-20 10:34:30 +00:00
if (IS_ERR(idev))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return;
memset(&addr, 0, sizeof(struct in6_addr));
addr.s6_addr32[0] = htonl(0xFE800000);
if (ipv6_generate_eui64(addr.s6_addr + 8, dev) == 0)
addrconf_add_linklocal(idev, &addr);
}
ipv6: use IS_ENABLED() #if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29 16:23:10 +00:00
#if IS_ENABLED(CONFIG_IPV6_SIT)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static void addrconf_sit_config(struct net_device *dev)
{
struct inet6_dev *idev;
ASSERT_RTNL();
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
/*
* Configure the tunnel with one of our IPv4
* addresses... we should configure all of
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* our v4 addrs in the tunnel
*/
if ((idev = ipv6_find_idev(dev)) == NULL) {
net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debug Use the current debugging style and enable dynamic_debug. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:54 +00:00
pr_debug("%s: add_dev failed\n", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return;
}
[IPV6]: Add RFC4214 support This patch includes support for the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) per RFC4214. It uses the SIT module, and is configured using extensions to the "iproute2" utility. The diffs are specific to the Linux 2.6.24-rc2 kernel distribution. This version includes the diff for ./include/linux/if.h which was missing in the v2.4 submission and is needed to make the patch compile. The patch has been installed, compiled and tested in a clean 2.6.24-rc2 kernel build area. Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-29 11:11:40 +00:00
if (dev->priv_flags & IFF_ISATAP) {
struct in6_addr addr;
ipv6_addr_set(&addr, htonl(0xFE800000), 0, 0, 0);
addrconf_prefix_route(&addr, 64, dev, 0, 0);
if (!ipv6_generate_eui64(addr.s6_addr + 8, dev))
addrconf_add_linklocal(idev, &addr);
return;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sit_add_v4_addrs(idev);
ipv6: don't add link local route when there is no link local address When an address is added on loopback (ip -6 a a 2002::1/128 dev lo), a route to fe80::/64 is added in the main table: unreachable fe80::/64 dev lo proto kernel metric 256 error -101 This route does not match any prefix (no fe80:: address on lo). In fact, addrconf_dev_config() will not add link local address because this function filters interfaces by type. If the link local address is added manually, the route to the link local prefix will be automatically added by addrconf_add_linklocal(). Note also, that this route is not deleted when the address is removed. After looking at the code, it seems that addrconf_add_lroute() is redundant with addrconf_add_linklocal(), because this function will add the link local route when the link local address is configured. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01 23:19:14 +00:00
if (dev->flags&IFF_POINTOPOINT)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
addrconf_add_mroute(dev);
ipv6: don't add link local route when there is no link local address When an address is added on loopback (ip -6 a a 2002::1/128 dev lo), a route to fe80::/64 is added in the main table: unreachable fe80::/64 dev lo proto kernel metric 256 error -101 This route does not match any prefix (no fe80:: address on lo). In fact, addrconf_dev_config() will not add link local address because this function filters interfaces by type. If the link local address is added manually, the route to the link local prefix will be automatically added by addrconf_add_linklocal(). Note also, that this route is not deleted when the address is removed. After looking at the code, it seems that addrconf_add_lroute() is redundant with addrconf_add_linklocal(), because this function will add the link local route when the link local address is configured. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01 23:19:14 +00:00
else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sit_route_add(dev);
}
[IPV6]: Seperate sit driver to extra module (addrconf.c changes) This patch contains the changes to net/ipv6/addrconf.c to remove sit specific code if the sit driver is not selected. Signed-off-by: Joerg Roedel <joro-lkml@zlug.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-10 21:49:53 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6: use IS_ENABLED() #if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29 16:23:10 +00:00
#if IS_ENABLED(CONFIG_NET_IPGRE)
ipv6: generate link local address for GRE tunnel Use same logic as SIT tunnel to handle link local address for GRE tunnel. OSPFv3 requires link-local address to function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 10:44:30 +00:00
static void addrconf_gre_config(struct net_device *dev)
{
struct inet6_dev *idev;
struct in6_addr addr;
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
pr_info("%s(%s)\n", __func__, dev->name);
ipv6: generate link local address for GRE tunnel Use same logic as SIT tunnel to handle link local address for GRE tunnel. OSPFv3 requires link-local address to function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 10:44:30 +00:00
ASSERT_RTNL();
if ((idev = ipv6_find_idev(dev)) == NULL) {
net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debug Use the current debugging style and enable dynamic_debug. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:54 +00:00
pr_debug("%s: add_dev failed\n", __func__);
ipv6: generate link local address for GRE tunnel Use same logic as SIT tunnel to handle link local address for GRE tunnel. OSPFv3 requires link-local address to function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 10:44:30 +00:00
return;
}
ipv6_addr_set(&addr, htonl(0xFE800000), 0, 0, 0);
addrconf_prefix_route(&addr, 64, dev, 0, 0);
if (!ipv6_generate_eui64(addr.s6_addr + 8, dev))
addrconf_add_linklocal(idev, &addr);
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static inline int
ipv6_inherit_linklocal(struct inet6_dev *idev, struct net_device *link_dev)
{
struct in6_addr lladdr;
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
if (!ipv6_get_lladdr(link_dev, &lladdr, IFA_F_TENTATIVE)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
addrconf_add_linklocal(idev, &lladdr);
return 0;
}
return -1;
}
static void ip6_tnl_add_linklocal(struct inet6_dev *idev)
{
struct net_device *link_dev;
[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS. Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 12:47:49 +00:00
struct net *net = dev_net(idev->dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* first try to inherit the link-local address from the link device */
if (idev->dev->iflink &&
[NETNS][IPV6] addrconf - make addrconf per namespace All the infrastructure to propagate the network namespace information is ready. Make use of it. There is a special case here between the initial network namespace and the other namespaces: * When ipv6 is initialized at boot time (aka in the init_net), it registers to the notifier callback. So addrconf_notify will be called as many time as there are network devices setup on the system and the function will add ipv6 addresses to the network devices. But the first device which needs to have its ipv6 address setup is the loopback, unfortunatly this is not the case. So the loopback address is setup manually in the ipv6 init function. * With the network namespace, this ordering problem does not appears because notifier is already setup and active, so as soon as we register the loopback the ipv6 address is setup and it will be the first device. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:47:47 +00:00
(link_dev = __dev_get_by_index(net, idev->dev->iflink))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!ipv6_inherit_linklocal(idev, link_dev))
return;
}
/* then try to inherit it from any device */
[NETNS][IPV6] addrconf - make addrconf per namespace All the infrastructure to propagate the network namespace information is ready. Make use of it. There is a special case here between the initial network namespace and the other namespaces: * When ipv6 is initialized at boot time (aka in the init_net), it registers to the notifier callback. So addrconf_notify will be called as many time as there are network devices setup on the system and the function will add ipv6 addresses to the network devices. But the first device which needs to have its ipv6 address setup is the loopback, unfortunatly this is not the case. So the loopback address is setup manually in the ipv6 init function. * With the network namespace, this ordering problem does not appears because notifier is already setup and active, so as soon as we register the loopback the ipv6 address is setup and it will be the first device. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:47:47 +00:00
for_each_netdev(net, link_dev) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!ipv6_inherit_linklocal(idev, link_dev))
return;
}
net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debug Use the current debugging style and enable dynamic_debug. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:54 +00:00
pr_debug("init ip6-ip6: add_linklocal failed\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/*
* Autoconfigure tunnel with a link-local address so routing protocols,
* DHCPv6, MLD etc. can be run over the virtual link
*/
static void addrconf_ip6_tnl_config(struct net_device *dev)
{
struct inet6_dev *idev;
ASSERT_RTNL();
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
idev = addrconf_add_dev(dev);
ipv6: Don't add routes to ipv6 disabled interfaces. If the interface has IPv6 disabled, don't add a multicast or link-local route since we won't be adding a link-local address. Reported-by: Mahesh Kelkar <maheshkelkar@gmail.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-20 10:34:30 +00:00
if (IS_ERR(idev)) {
net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debug Use the current debugging style and enable dynamic_debug. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:54 +00:00
pr_debug("init ip6-ip6: add_dev failed\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return;
}
ip6_tnl_add_linklocal(idev);
}
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
static int addrconf_notify(struct notifier_block *this, unsigned long event,
net/ipv6/addrconf.c: Checkpatch cleanups net/ipv6/addrconf.c:340: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:342: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:444: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:1337: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:1526: ERROR: "(foo*)" should be "(foo *)" net/ipv6/addrconf.c:1671: ERROR: open brace '{' following function declarations go on the next line net/ipv6/addrconf.c:1914: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2368: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2370: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2416: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2437: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2573: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:3797: ERROR: "foo* bar" should be "foo *bar" Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 07:49:08 +00:00
void *data)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct net_device *dev = (struct net_device *) data;
net: reinstate rtnl in call_netdevice_notifiers() Eric Biederman pointed out that not holding RTNL while calling call_netdevice_notifiers() was racy. This patch is a direct transcription his feedback against commit 0115e8e30d6fc (net: remove delay at device dismantle) Thanks Eric ! Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-22 21:50:59 +00:00
struct inet6_dev *idev = __in6_dev_get(dev);
[IPV6]: Run DAD when the link becomes ready. If the link was not available when the interface was created, run DAD for pending tentative addresses when the link becomes ready. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:44 +00:00
int run_pending = 0;
[IPV4/IPV6]: Fail registration if inet device construction fails Now that netdev notifications can fail, we can use this to signal errors during registration for IPv4/IPv6. In particular, if we fail to allocate memory for the inet device, we can fail the netdev registration. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 00:04:52 +00:00
int err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
switch (event) {
[IPV6] ADDRCONF: Register inet6_dev earlier. Allocate inet6_dev earlier to allow users to set up per-interface variables. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-02-14 17:07:27 +00:00
case NETDEV_REGISTER:
[IPV6] addrconf: Fix IPv6 on tuntap tunnels The recent patch that added ipv6_hwtype is broken on tuntap tunnels. Indeed, it's broken on any device that does not pass the ipv6_hwtype test. The reason is that the original test only applies to autoconfiguration, not IPv6 support. IPv6 support is allowed on any device. In fact, even with the ipv6_hwtype patch applied you can still add IPv6 addresses to any interface that doesn't pass thw ipv6_hwtype test provided that they have a sufficiently large MTU. This is a serious problem because come deregistration time these devices won't be cleaned up properly. I've gone back and looked at the rationale for the patch. It appears that the real problem is that we were creating IPv6 devices even if the MTU was too small. So here's a patch which fixes that and reverts the ipv6_hwtype stuff. Thanks to Kanru Chen for reporting this issue. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-14 20:02:55 +00:00
if (!idev && dev->mtu >= IPV6_MIN_MTU) {
[IPV6] ADDRCONF: Register inet6_dev earlier. Allocate inet6_dev earlier to allow users to set up per-interface variables. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-02-14 17:07:27 +00:00
idev = ipv6_add_dev(dev);
if (!idev)
[IPV4/IPV6]: Fail registration if inet device construction fails Now that netdev notifications can fail, we can use this to signal errors during registration for IPv4/IPv6. In particular, if we fail to allocate memory for the inet device, we can fail the netdev registration. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 00:04:52 +00:00
return notifier_from_errno(-ENOMEM);
[IPV6] ADDRCONF: Register inet6_dev earlier. Allocate inet6_dev earlier to allow users to set up per-interface variables. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-02-14 17:07:27 +00:00
}
break;
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
case NETDEV_UP:
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
case NETDEV_CHANGE:
bonding / ipv6: no addrconf for slaves separately from master At present, when a device is enslaved to bonding, if ipv6 is active then addrconf will be initated on the slave (because it is closed then opened during the enslavement processing). This causes DAD and RS packets to be sent from the slave. These packets in turn can confuse switches that perform ipv6 snooping, causing them to incorrectly update their forwarding tables (if, e.g., the slave being added is an inactve backup that won't be used right away) and direct traffic away from the active slave to a backup slave (where the incoming packets will be dropped). This patch alters the behavior so that addrconf will only run on the master device itself. I believe this is logically correct, as it prevents slaves from having an IPv6 identity independent from the master. This is consistent with the IPv4 behavior for bonding. This is accomplished by (a) having bonding set IFF_SLAVE sooner in the enslavement processing than currently occurs (before open, not after), and (b) having ipv6 addrconf ignore UP and CHANGE events on slave devices. The eql driver also uses the IFF_SLAVE flag. I inspected eql, and I believe this change is reasonable for its usage of IFF_SLAVE, but I did not test it. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09 17:42:47 +00:00
if (dev->flags & IFF_SLAVE)
break;
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
if (event == NETDEV_UP) {
[IPV6]: Defer IPv6 device initialization until a valid qdisc is specified To judge the timing for DAD, netif_carrier_ok() is used. However, there is a possibility that dev->qdisc stays noop_qdisc even if netif_carrier_ok() returns true. In that case, DAD NS is not sent out. We need to defer the IPv6 device initialization until a valid qdisc is specified. Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 09:53:43 +00:00
if (!addrconf_qdisc_ok(dev)) {
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
/* device is not ready yet. */
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
pr_info("ADDRCONF(NETDEV_UP): %s: link is not ready\n",
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
dev->name);
break;
}
[IPV6]: Address autoconfiguration does not work after device down/up cycle If you set network interface down and up again, the IPv6 address autoconfiguration does not work. 'ip addr' shows that the link-local address is in tentative state. We don't even react to periodical router advertisements. During NETDEV_DOWN we clear IF_READY, and we don't set it back in NETDEV_UP. While starting to perform DAD on the link-local address, we notice that the device is not in IF_READY, and we abort autoconfiguration process (which would eventually send router solicitations). Acked-by: Juha-Matti Tapio <jmtapio@verkkotelakka.net> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 00:10:53 +00:00
[IPV6]: Restore IPv6 when MTU is big enough Avaid provided test application, so bug got fixed. IPv6 addrconf removes ipv6 inner device from netdev each time cmu changes and new value is less than IPV6_MIN_MTU (1280 bytes). When mtu is changed and new value is greater than IPV6_MIN_MTU, it does not add ipv6 addresses and inner device bac. This patch fixes that. Tested with Avaid's application, which works ok now. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-30 12:36:08 +00:00
if (!idev && dev->mtu >= IPV6_MIN_MTU)
idev = ipv6_add_dev(dev);
ipv6: fix run pending DAD when interface becomes ready With some net devices types, an IPv6 address configured while the interface was down can stay 'tentative' forever, even after the interface is set up. In some case, pending IPv6 DADs are not executed when the device becomes ready. I observed this while doing some tests with kvm. If I assign an IPv6 address to my interface eth0 (kvm driver rtl8139) when it is still down then the address is flagged tentative (IFA_F_TENTATIVE). Then, I set eth0 up, and to my surprise, the address stays 'tentative', no DAD is executed and the address can't be pinged. I also observed the same behaviour, without kvm, with virtual interfaces types macvlan and veth. Some easy steps to reproduce the issue with macvlan: 1. ip link add link eth0 type macvlan 2. ip -6 addr add 2003::ab32/64 dev macvlan0 3. ip addr show dev macvlan0 ... inet6 2003::ab32/64 scope global tentative ... 4. ip link set macvlan0 up 5. ip addr show dev macvlan0 ... inet6 2003::ab32/64 scope global tentative ... Address is still tentative I think there's a bug in net/ipv6/addrconf.c, addrconf_notify(): addrconf_dad_run() is not always run when the interface is flagged IF_READY. Currently it is only run when receiving NETDEV_CHANGE event. Looks like some (virtual) devices doesn't send this event when becoming up. For both NETDEV_UP and NETDEV_CHANGE events, when the interface becomes ready, run_pending should be set to 1. Patch below. 'run_pending = 1' could be moved below the if/else block but it makes the code less readable. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-05 09:43:57 +00:00
if (idev) {
[IPV6]: Address autoconfiguration does not work after device down/up cycle If you set network interface down and up again, the IPv6 address autoconfiguration does not work. 'ip addr' shows that the link-local address is in tentative state. We don't even react to periodical router advertisements. During NETDEV_DOWN we clear IF_READY, and we don't set it back in NETDEV_UP. While starting to perform DAD on the link-local address, we notice that the device is not in IF_READY, and we abort autoconfiguration process (which would eventually send router solicitations). Acked-by: Juha-Matti Tapio <jmtapio@verkkotelakka.net> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 00:10:53 +00:00
idev->if_flags |= IF_READY;
ipv6: fix run pending DAD when interface becomes ready With some net devices types, an IPv6 address configured while the interface was down can stay 'tentative' forever, even after the interface is set up. In some case, pending IPv6 DADs are not executed when the device becomes ready. I observed this while doing some tests with kvm. If I assign an IPv6 address to my interface eth0 (kvm driver rtl8139) when it is still down then the address is flagged tentative (IFA_F_TENTATIVE). Then, I set eth0 up, and to my surprise, the address stays 'tentative', no DAD is executed and the address can't be pinged. I also observed the same behaviour, without kvm, with virtual interfaces types macvlan and veth. Some easy steps to reproduce the issue with macvlan: 1. ip link add link eth0 type macvlan 2. ip -6 addr add 2003::ab32/64 dev macvlan0 3. ip addr show dev macvlan0 ... inet6 2003::ab32/64 scope global tentative ... 4. ip link set macvlan0 up 5. ip addr show dev macvlan0 ... inet6 2003::ab32/64 scope global tentative ... Address is still tentative I think there's a bug in net/ipv6/addrconf.c, addrconf_notify(): addrconf_dad_run() is not always run when the interface is flagged IF_READY. Currently it is only run when receiving NETDEV_CHANGE event. Looks like some (virtual) devices doesn't send this event when becoming up. For both NETDEV_UP and NETDEV_CHANGE events, when the interface becomes ready, run_pending should be set to 1. Patch below. 'run_pending = 1' could be moved below the if/else block but it makes the code less readable. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-05 09:43:57 +00:00
run_pending = 1;
}
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
} else {
[IPV6]: Defer IPv6 device initialization until a valid qdisc is specified To judge the timing for DAD, netif_carrier_ok() is used. However, there is a possibility that dev->qdisc stays noop_qdisc even if netif_carrier_ok() returns true. In that case, DAD NS is not sent out. We need to defer the IPv6 device initialization until a valid qdisc is specified. Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 09:53:43 +00:00
if (!addrconf_qdisc_ok(dev)) {
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
/* device is still not ready. */
break;
}
if (idev) {
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
if (idev->if_flags & IF_READY)
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
/* device is already configured. */
break;
idev->if_flags |= IF_READY;
}
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
pr_info("ADDRCONF(NETDEV_CHANGE): %s: link becomes ready\n",
dev->name);
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
[IPV6]: Run DAD when the link becomes ready. If the link was not available when the interface was created, run DAD for pending tentative addresses when the link becomes ready. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:44 +00:00
run_pending = 1;
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
}
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
switch (dev->type) {
ipv6: use IS_ENABLED() #if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29 16:23:10 +00:00
#if IS_ENABLED(CONFIG_IPV6_SIT)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
case ARPHRD_SIT:
addrconf_sit_config(dev);
break;
ipv6: generate link local address for GRE tunnel Use same logic as SIT tunnel to handle link local address for GRE tunnel. OSPFv3 requires link-local address to function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 10:44:30 +00:00
#endif
ipv6: use IS_ENABLED() #if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29 16:23:10 +00:00
#if IS_ENABLED(CONFIG_NET_IPGRE)
ipv6: generate link local address for GRE tunnel Use same logic as SIT tunnel to handle link local address for GRE tunnel. OSPFv3 requires link-local address to function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 10:44:30 +00:00
case ARPHRD_IPGRE:
addrconf_gre_config(dev);
break;
[IPV6]: Seperate sit driver to extra module (addrconf.c changes) This patch contains the changes to net/ipv6/addrconf.c to remove sit specific code if the sit driver is not selected. Signed-off-by: Joerg Roedel <joro-lkml@zlug.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-10 21:49:53 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
case ARPHRD_TUNNEL6:
addrconf_ip6_tnl_config(dev);
break;
case ARPHRD_LOOPBACK:
init_loopback(dev);
break;
default:
addrconf_dev_config(dev);
break;
[NET]: cleanup extra semicolons Spring cleaning time... There seems to be a lot of places in the network code that have extra bogus semicolons after conditionals. Most commonly is a bogus semicolon after: switch() { } Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 00:09:22 +00:00
}
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (idev) {
[IPV6]: Run DAD when the link becomes ready. If the link was not available when the interface was created, run DAD for pending tentative addresses when the link becomes ready. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:44 +00:00
if (run_pending)
addrconf_dad_run(idev);
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
/*
* If the MTU changed during the interface down,
* when the interface up, the changed MTU must be
* reflected in the idev as well as routers.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
if (idev->cnf.mtu6 != dev->mtu &&
dev->mtu >= IPV6_MIN_MTU) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
rt6_mtu_change(dev, dev->mtu);
idev->cnf.mtu6 = dev->mtu;
}
idev->tstamp = jiffies;
inet6_ifinfo_notify(RTM_NEWLINK, idev);
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
/*
* If the changed mtu during down is lower than
* IPV6_MIN_MTU stop IPv6 on this interface.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
if (dev->mtu < IPV6_MIN_MTU)
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
addrconf_ifdown(dev, 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
break;
case NETDEV_CHANGEMTU:
[IPV6]: Restore IPv6 when MTU is big enough Avaid provided test application, so bug got fixed. IPv6 addrconf removes ipv6 inner device from netdev each time cmu changes and new value is less than IPV6_MIN_MTU (1280 bytes). When mtu is changed and new value is greater than IPV6_MIN_MTU, it does not add ipv6 addresses and inner device bac. This patch fixes that. Tested with Avaid's application, which works ok now. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-30 12:36:08 +00:00
if (idev && dev->mtu >= IPV6_MIN_MTU) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
rt6_mtu_change(dev, dev->mtu);
idev->cnf.mtu6 = dev->mtu;
break;
}
[IPV6]: Restore IPv6 when MTU is big enough Avaid provided test application, so bug got fixed. IPv6 addrconf removes ipv6 inner device from netdev each time cmu changes and new value is less than IPV6_MIN_MTU (1280 bytes). When mtu is changed and new value is greater than IPV6_MIN_MTU, it does not add ipv6 addresses and inner device bac. This patch fixes that. Tested with Avaid's application, which works ok now. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-30 12:36:08 +00:00
if (!idev && dev->mtu >= IPV6_MIN_MTU) {
idev = ipv6_add_dev(dev);
if (idev)
break;
}
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
/*
* MTU falled under IPV6_MIN_MTU.
* Stop IPv6 on this interface.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
case NETDEV_DOWN:
case NETDEV_UNREGISTER:
/*
* Remove all addresses from this interface.
*/
addrconf_ifdown(dev, event != NETDEV_DOWN);
break;
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
case NETDEV_CHANGENAME:
if (idev) {
[IPV6]: Track device renames in snmp6. When network device's are renamed, the IPV6 snmp6 code gets confused. It doesn't track name changes so it will OOPS when network device's are removed. The fix is trivial, just unregister/re-register in notify handler. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-29 04:16:39 +00:00
snmp6_unregister_dev(idev);
[NETNS]: Clean out the ipv6-related sysctls creation/destruction The addrconf sysctls and neigh sysctls are registered and unregistered always in pairs, so they can be joined into one (well, two) functions, that accept the struct inet6_dev and do all the job. This also get rids of unneeded ifdefs inside the code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:41:21 +00:00
addrconf_sysctl_unregister(idev);
[IPV6]: Unify and cleanup calls to addrconf_sysctl_register Currently this call is (ab)used similar to devinet one - it registers sysctls for devices and for the "default" confs, while the "all" sysctls are registered separately. But unlike its devinet brother, the passed inet6_device is needed. The fix is to make a __addrconf_sysctl_register(), which registers sysctls for all "devices" we need, including "default" and "all" :) The original addrconf_sysctl_register() calls the introduced function, passing the inet6_device, device name and ifindex (to be used as procname and ctl_name) into it. Thanks to Herbert again for pointing out, that we can shrink the argument list to 1 :) Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-01 13:58:37 +00:00
addrconf_sysctl_register(idev);
[IPV4/IPV6]: Fail registration if inet device construction fails Now that netdev notifications can fail, we can use this to signal errors during registration for IPv4/IPv6. In particular, if we fail to allocate memory for the inet device, we can fail the netdev registration. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 00:04:52 +00:00
err = snmp6_register_dev(idev);
if (err)
return notifier_from_errno(err);
[IPV6]: Track device renames in snmp6. When network device's are renamed, the IPV6 snmp6 code gets confused. It doesn't track name changes so it will OOPS when network device's are removed. The fix is trivial, just unregister/re-register in notify handler. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-29 04:16:39 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
net: rename notifier defines for netdev type change Since generally there could be more netdevices changing type other than bonding, making this event type name "bonding-unrelated" Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10 10:28:56 +00:00
case NETDEV_PRE_TYPE_CHANGE:
case NETDEV_POST_TYPE_CHANGE:
addrconf_type_change(dev, event);
bonding: remap muticast addresses without using dev_close() and dev_open() This patch fixes commit e36b9d16c6a6d0f59803b3ef04ff3c22c3844c10. The approach there is to call dev_close()/dev_open() whenever the device type is changed in order to remap the device IP multicast addresses to HW multicast addresses. This approach suffers from 2 drawbacks: *. It assumes tha the device is UP when calling dev_close(), or otherwise dev_close() has no affect. It is worth to mention that initscripts (Redhat) and sysconfig (Suse) doesn't act the same in this matter. *. dev_close() has other side affects, like deleting entries from the routing table, which might be unnecessary. The fix here is to directly remap the IP multicast addresses to HW multicast addresses for a bonding device that changes its type, and nothing else. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15 09:37:40 +00:00
break;
[NET]: cleanup extra semicolons Spring cleaning time... There seems to be a lot of places in the network code that have extra bogus semicolons after conditionals. Most commonly is a bogus semicolon after: switch() { } Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 00:09:22 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return NOTIFY_OK;
}
/*
* addrconf module should be notified of a device going up
*/
static struct notifier_block ipv6_dev_notf = {
.notifier_call = addrconf_notify,
};
net: rename notifier defines for netdev type change Since generally there could be more netdevices changing type other than bonding, making this event type name "bonding-unrelated" Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10 10:28:56 +00:00
static void addrconf_type_change(struct net_device *dev, unsigned long event)
bonding: remap muticast addresses without using dev_close() and dev_open() This patch fixes commit e36b9d16c6a6d0f59803b3ef04ff3c22c3844c10. The approach there is to call dev_close()/dev_open() whenever the device type is changed in order to remap the device IP multicast addresses to HW multicast addresses. This approach suffers from 2 drawbacks: *. It assumes tha the device is UP when calling dev_close(), or otherwise dev_close() has no affect. It is worth to mention that initscripts (Redhat) and sysconfig (Suse) doesn't act the same in this matter. *. dev_close() has other side affects, like deleting entries from the routing table, which might be unnecessary. The fix here is to directly remap the IP multicast addresses to HW multicast addresses for a bonding device that changes its type, and nothing else. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15 09:37:40 +00:00
{
struct inet6_dev *idev;
ASSERT_RTNL();
idev = __in6_dev_get(dev);
net: rename notifier defines for netdev type change Since generally there could be more netdevices changing type other than bonding, making this event type name "bonding-unrelated" Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10 10:28:56 +00:00
if (event == NETDEV_POST_TYPE_CHANGE)
bonding: remap muticast addresses without using dev_close() and dev_open() This patch fixes commit e36b9d16c6a6d0f59803b3ef04ff3c22c3844c10. The approach there is to call dev_close()/dev_open() whenever the device type is changed in order to remap the device IP multicast addresses to HW multicast addresses. This approach suffers from 2 drawbacks: *. It assumes tha the device is UP when calling dev_close(), or otherwise dev_close() has no affect. It is worth to mention that initscripts (Redhat) and sysconfig (Suse) doesn't act the same in this matter. *. dev_close() has other side affects, like deleting entries from the routing table, which might be unnecessary. The fix here is to directly remap the IP multicast addresses to HW multicast addresses for a bonding device that changes its type, and nothing else. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15 09:37:40 +00:00
ipv6_mc_remap(idev);
net: rename notifier defines for netdev type change Since generally there could be more netdevices changing type other than bonding, making this event type name "bonding-unrelated" Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10 10:28:56 +00:00
else if (event == NETDEV_PRE_TYPE_CHANGE)
bonding: remap muticast addresses without using dev_close() and dev_open() This patch fixes commit e36b9d16c6a6d0f59803b3ef04ff3c22c3844c10. The approach there is to call dev_close()/dev_open() whenever the device type is changed in order to remap the device IP multicast addresses to HW multicast addresses. This approach suffers from 2 drawbacks: *. It assumes tha the device is UP when calling dev_close(), or otherwise dev_close() has no affect. It is worth to mention that initscripts (Redhat) and sysconfig (Suse) doesn't act the same in this matter. *. dev_close() has other side affects, like deleting entries from the routing table, which might be unnecessary. The fix here is to directly remap the IP multicast addresses to HW multicast addresses for a bonding device that changes its type, and nothing else. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15 09:37:40 +00:00
ipv6_mc_unmap(idev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int addrconf_ifdown(struct net_device *dev, int how)
{
[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS. Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 12:47:49 +00:00
struct net *net = dev_net(dev);
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
struct inet6_dev *idev;
struct inet6_ifaddr *ifa;
ipv6: Revert 'administrative down' address handling changes. This reverts the following set of commits: d1ed113f1669390da9898da3beddcc058d938587 ("ipv6: remove duplicate neigh_ifdown") 29ba5fed1bbd09c2cba890798c8f9eaab251401d ("ipv6: don't flush routes when setting loopback down") 9d82ca98f71fd686ef2f3017c5e3e6a4871b6e46 ("ipv6: fix missing in6_ifa_put in addrconf") 2de795707294972f6c34bae9de713e502c431296 ("ipv6: addrconf: don't remove address state on ifdown if the address is being kept") 8595805aafc8b077e01804c9a3668e9aa3510e89 ("IPv6: only notify protocols if address is compeletely gone") 27bdb2abcc5edb3526e25407b74bf17d1872c329 ("IPv6: keep tentative addresses in hash table") 93fa159abe50d3c55c7f83622d3f5c09b6e06f4b ("IPv6: keep route for tentative address") 8f37ada5b5f6bfb4d251a7f510f249cb855b77b3 ("IPv6: fix race between cleanup and add/delete address") 84e8b803f1e16f3a2b8b80f80a63fa2f2f8a9be6 ("IPv6: addrconf notify when address is unavailable") dc2b99f71ef477a31020511876ab4403fb7c4420 ("IPv6: keep permanent addresses on admin down") because the core semantic change to ipv6 address handling on ifdown has broken some things, in particular "disable_ipv6" sysctl handling. Stephen has made several attempts to get things back in working order, but nothing has restored disable_ipv6 fully yet. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24 07:27:15 +00:00
int state, i;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ASSERT_RTNL();
ipv6: Revert 'administrative down' address handling changes. This reverts the following set of commits: d1ed113f1669390da9898da3beddcc058d938587 ("ipv6: remove duplicate neigh_ifdown") 29ba5fed1bbd09c2cba890798c8f9eaab251401d ("ipv6: don't flush routes when setting loopback down") 9d82ca98f71fd686ef2f3017c5e3e6a4871b6e46 ("ipv6: fix missing in6_ifa_put in addrconf") 2de795707294972f6c34bae9de713e502c431296 ("ipv6: addrconf: don't remove address state on ifdown if the address is being kept") 8595805aafc8b077e01804c9a3668e9aa3510e89 ("IPv6: only notify protocols if address is compeletely gone") 27bdb2abcc5edb3526e25407b74bf17d1872c329 ("IPv6: keep tentative addresses in hash table") 93fa159abe50d3c55c7f83622d3f5c09b6e06f4b ("IPv6: keep route for tentative address") 8f37ada5b5f6bfb4d251a7f510f249cb855b77b3 ("IPv6: fix race between cleanup and add/delete address") 84e8b803f1e16f3a2b8b80f80a63fa2f2f8a9be6 ("IPv6: addrconf notify when address is unavailable") dc2b99f71ef477a31020511876ab4403fb7c4420 ("IPv6: keep permanent addresses on admin down") because the core semantic change to ipv6 address handling on ifdown has broken some things, in particular "disable_ipv6" sysctl handling. Stephen has made several attempts to get things back in working order, but nothing has restored disable_ipv6 fully yet. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24 07:27:15 +00:00
rt6_ifdown(net, dev);
neigh_ifdown(&nd_tbl, dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
idev = __in6_dev_get(dev);
if (idev == NULL)
return -ENODEV;
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
/*
* Step 1: remove reference to ipv6 device from parent device.
* Do not dev_put!
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
[IPV6]: Event type in addrconf_ifdown is mis-used. addrconf_ifdown is broken in respect to the usage of how parameter. This function is called with (event != NETDEV_DOWN) and (2) on the IPv6 stop. It the latter case inet6_dev from loopback device should be destroyed. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-03 20:30:17 +00:00
if (how) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
idev->dead = 1;
[IPV6] ADDRCONF: Convert addrconf_lock to RCU. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:44:24 +00:00
/* protected by rtnl_lock */
rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER When assigning a NULL value to an RCU protected pointer, no barrier is needed. The rcu_assign_pointer, used to handle that but will soon change to not handle the special case. Convert all rcu_assign_pointer of NULL value. //smpl @@ expression P; @@ - rcu_assign_pointer(P, NULL) + RCU_INIT_POINTER(P, NULL) // </smpl> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-01 16:19:00 +00:00
RCU_INIT_POINTER(dev->ip6_ptr, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Step 1.5: remove snmp6 entry */
snmp6_unregister_dev(idev);
}
ipv6: Revert 'administrative down' address handling changes. This reverts the following set of commits: d1ed113f1669390da9898da3beddcc058d938587 ("ipv6: remove duplicate neigh_ifdown") 29ba5fed1bbd09c2cba890798c8f9eaab251401d ("ipv6: don't flush routes when setting loopback down") 9d82ca98f71fd686ef2f3017c5e3e6a4871b6e46 ("ipv6: fix missing in6_ifa_put in addrconf") 2de795707294972f6c34bae9de713e502c431296 ("ipv6: addrconf: don't remove address state on ifdown if the address is being kept") 8595805aafc8b077e01804c9a3668e9aa3510e89 ("IPv6: only notify protocols if address is compeletely gone") 27bdb2abcc5edb3526e25407b74bf17d1872c329 ("IPv6: keep tentative addresses in hash table") 93fa159abe50d3c55c7f83622d3f5c09b6e06f4b ("IPv6: keep route for tentative address") 8f37ada5b5f6bfb4d251a7f510f249cb855b77b3 ("IPv6: fix race between cleanup and add/delete address") 84e8b803f1e16f3a2b8b80f80a63fa2f2f8a9be6 ("IPv6: addrconf notify when address is unavailable") dc2b99f71ef477a31020511876ab4403fb7c4420 ("IPv6: keep permanent addresses on admin down") because the core semantic change to ipv6 address handling on ifdown has broken some things, in particular "disable_ipv6" sysctl handling. Stephen has made several attempts to get things back in working order, but nothing has restored disable_ipv6 fully yet. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24 07:27:15 +00:00
/* Step 2: clear hash table */
for (i = 0; i < IN6_ADDR_HSIZE; i++) {
struct hlist_head *h = &inet6_addr_lst[i];
struct hlist_node *n;
spin_lock_bh(&addrconf_hash_lock);
restart:
hlist_for_each_entry_rcu(ifa, n, h, addr_lst) {
if (ifa->idev == idev) {
hlist_del_init_rcu(&ifa->addr_lst);
addrconf_del_timer(ifa);
goto restart;
}
}
spin_unlock_bh(&addrconf_hash_lock);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
write_lock_bh(&idev->lock);
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
/* Step 2: clear flags for stateless addrconf */
[IPV6]: Event type in addrconf_ifdown is mis-used. addrconf_ifdown is broken in respect to the usage of how parameter. This function is called with (event != NETDEV_DOWN) and (2) on the IPv6 stop. It the latter case inet6_dev from loopback device should be destroyed. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-03 20:30:17 +00:00
if (!how)
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
idev->if_flags &= ~(IF_RS_SENT|IF_RA_RCVD|IF_READY);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_IPV6_PRIVACY
[IPV6]: Event type in addrconf_ifdown is mis-used. addrconf_ifdown is broken in respect to the usage of how parameter. This function is called with (event != NETDEV_DOWN) and (2) on the IPv6 stop. It the latter case inet6_dev from loopback device should be destroyed. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-03 20:30:17 +00:00
if (how && del_timer(&idev->regen_timer))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_dev_put(idev);
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
/* Step 3: clear tempaddr list */
ipv6: convert temporary address list to list macros Use list macros instead of open coded linked list. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:09 +00:00
while (!list_empty(&idev->tempaddr_list)) {
ifa = list_first_entry(&idev->tempaddr_list,
struct inet6_ifaddr, tmp_list);
list_del(&ifa->tmp_list);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
write_unlock_bh(&idev->lock);
spin_lock_bh(&ifa->lock);
if (ifa->ifpub) {
in6_ifa_put(ifa->ifpub);
ifa->ifpub = NULL;
}
spin_unlock_bh(&ifa->lock);
in6_ifa_put(ifa);
write_lock_bh(&idev->lock);
}
#endif
IPv6: fix race between cleanup and add/delete address This solves a potential race problem during the cleanup process. The issue is that addrconf_ifdown() needs to traverse address list, but then drop lock to call the notifier. The version in -next could get confused if add/delete happened during this window. Original code (2.6.32 and earlier) was okay because all addresses were always deleted. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-03 08:19:59 +00:00
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
while (!list_empty(&idev->addr_list)) {
ifa = list_first_entry(&idev->addr_list,
struct inet6_ifaddr, if_list);
IPv6: addrconf notify when address is unavailable My recent change in net-next to retain permanent addresses caused regression. Device refcount would not go to zero when device was unregistered because left over anycast reference would hold ipv6 dev reference which would hold device references... The correct procedure is to call notify chain when address is no longer available for use. When interface comes back DAD timer will notify back that address is available. Also, link local addresses should be purged when interface is brought down. The address might be changed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 13:32:46 +00:00
addrconf_del_timer(ifa);
ipv6: Revert 'administrative down' address handling changes. This reverts the following set of commits: d1ed113f1669390da9898da3beddcc058d938587 ("ipv6: remove duplicate neigh_ifdown") 29ba5fed1bbd09c2cba890798c8f9eaab251401d ("ipv6: don't flush routes when setting loopback down") 9d82ca98f71fd686ef2f3017c5e3e6a4871b6e46 ("ipv6: fix missing in6_ifa_put in addrconf") 2de795707294972f6c34bae9de713e502c431296 ("ipv6: addrconf: don't remove address state on ifdown if the address is being kept") 8595805aafc8b077e01804c9a3668e9aa3510e89 ("IPv6: only notify protocols if address is compeletely gone") 27bdb2abcc5edb3526e25407b74bf17d1872c329 ("IPv6: keep tentative addresses in hash table") 93fa159abe50d3c55c7f83622d3f5c09b6e06f4b ("IPv6: keep route for tentative address") 8f37ada5b5f6bfb4d251a7f510f249cb855b77b3 ("IPv6: fix race between cleanup and add/delete address") 84e8b803f1e16f3a2b8b80f80a63fa2f2f8a9be6 ("IPv6: addrconf notify when address is unavailable") dc2b99f71ef477a31020511876ab4403fb7c4420 ("IPv6: keep permanent addresses on admin down") because the core semantic change to ipv6 address handling on ifdown has broken some things, in particular "disable_ipv6" sysctl handling. Stephen has made several attempts to get things back in working order, but nothing has restored disable_ipv6 fully yet. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24 07:27:15 +00:00
list_del(&ifa->if_list);
IPv6: addrconf notify when address is unavailable My recent change in net-next to retain permanent addresses caused regression. Device refcount would not go to zero when device was unregistered because left over anycast reference would hold ipv6 dev reference which would hold device references... The correct procedure is to call notify chain when address is no longer available for use. When interface comes back DAD timer will notify back that address is available. Also, link local addresses should be purged when interface is brought down. The address might be changed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 13:32:46 +00:00
ipv6: Revert 'administrative down' address handling changes. This reverts the following set of commits: d1ed113f1669390da9898da3beddcc058d938587 ("ipv6: remove duplicate neigh_ifdown") 29ba5fed1bbd09c2cba890798c8f9eaab251401d ("ipv6: don't flush routes when setting loopback down") 9d82ca98f71fd686ef2f3017c5e3e6a4871b6e46 ("ipv6: fix missing in6_ifa_put in addrconf") 2de795707294972f6c34bae9de713e502c431296 ("ipv6: addrconf: don't remove address state on ifdown if the address is being kept") 8595805aafc8b077e01804c9a3668e9aa3510e89 ("IPv6: only notify protocols if address is compeletely gone") 27bdb2abcc5edb3526e25407b74bf17d1872c329 ("IPv6: keep tentative addresses in hash table") 93fa159abe50d3c55c7f83622d3f5c09b6e06f4b ("IPv6: keep route for tentative address") 8f37ada5b5f6bfb4d251a7f510f249cb855b77b3 ("IPv6: fix race between cleanup and add/delete address") 84e8b803f1e16f3a2b8b80f80a63fa2f2f8a9be6 ("IPv6: addrconf notify when address is unavailable") dc2b99f71ef477a31020511876ab4403fb7c4420 ("IPv6: keep permanent addresses on admin down") because the core semantic change to ipv6 address handling on ifdown has broken some things, in particular "disable_ipv6" sysctl handling. Stephen has made several attempts to get things back in working order, but nothing has restored disable_ipv6 fully yet. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24 07:27:15 +00:00
write_unlock_bh(&idev->lock);
IPv6: addrconf notify when address is unavailable My recent change in net-next to retain permanent addresses caused regression. Device refcount would not go to zero when device was unregistered because left over anycast reference would hold ipv6 dev reference which would hold device references... The correct procedure is to call notify chain when address is no longer available for use. When interface comes back DAD timer will notify back that address is available. Also, link local addresses should be purged when interface is brought down. The address might be changed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 13:32:46 +00:00
ipv6: Revert 'administrative down' address handling changes. This reverts the following set of commits: d1ed113f1669390da9898da3beddcc058d938587 ("ipv6: remove duplicate neigh_ifdown") 29ba5fed1bbd09c2cba890798c8f9eaab251401d ("ipv6: don't flush routes when setting loopback down") 9d82ca98f71fd686ef2f3017c5e3e6a4871b6e46 ("ipv6: fix missing in6_ifa_put in addrconf") 2de795707294972f6c34bae9de713e502c431296 ("ipv6: addrconf: don't remove address state on ifdown if the address is being kept") 8595805aafc8b077e01804c9a3668e9aa3510e89 ("IPv6: only notify protocols if address is compeletely gone") 27bdb2abcc5edb3526e25407b74bf17d1872c329 ("IPv6: keep tentative addresses in hash table") 93fa159abe50d3c55c7f83622d3f5c09b6e06f4b ("IPv6: keep route for tentative address") 8f37ada5b5f6bfb4d251a7f510f249cb855b77b3 ("IPv6: fix race between cleanup and add/delete address") 84e8b803f1e16f3a2b8b80f80a63fa2f2f8a9be6 ("IPv6: addrconf notify when address is unavailable") dc2b99f71ef477a31020511876ab4403fb7c4420 ("IPv6: keep permanent addresses on admin down") because the core semantic change to ipv6 address handling on ifdown has broken some things, in particular "disable_ipv6" sysctl handling. Stephen has made several attempts to get things back in working order, but nothing has restored disable_ipv6 fully yet. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24 07:27:15 +00:00
spin_lock_bh(&ifa->state_lock);
state = ifa->state;
ifa->state = INET6_IFADDR_STATE_DEAD;
spin_unlock_bh(&ifa->state_lock);
ipv6: fix missing in6_ifa_put in addrconf Fix ref count bug introduced by commit 2de795707294972f6c34bae9de713e502c431296 Author: Lorenzo Colitti <lorenzo@google.com> Date: Wed Oct 27 18:16:49 2010 +0000 ipv6: addrconf: don't remove address state on ifdown if the address is being kept Fix logic so that addrconf_ifdown() decrements the inet6_ifaddr refcnt correctly with in6_ifa_put(). Reported-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15 20:29:21 +00:00
ipv6: Revert 'administrative down' address handling changes. This reverts the following set of commits: d1ed113f1669390da9898da3beddcc058d938587 ("ipv6: remove duplicate neigh_ifdown") 29ba5fed1bbd09c2cba890798c8f9eaab251401d ("ipv6: don't flush routes when setting loopback down") 9d82ca98f71fd686ef2f3017c5e3e6a4871b6e46 ("ipv6: fix missing in6_ifa_put in addrconf") 2de795707294972f6c34bae9de713e502c431296 ("ipv6: addrconf: don't remove address state on ifdown if the address is being kept") 8595805aafc8b077e01804c9a3668e9aa3510e89 ("IPv6: only notify protocols if address is compeletely gone") 27bdb2abcc5edb3526e25407b74bf17d1872c329 ("IPv6: keep tentative addresses in hash table") 93fa159abe50d3c55c7f83622d3f5c09b6e06f4b ("IPv6: keep route for tentative address") 8f37ada5b5f6bfb4d251a7f510f249cb855b77b3 ("IPv6: fix race between cleanup and add/delete address") 84e8b803f1e16f3a2b8b80f80a63fa2f2f8a9be6 ("IPv6: addrconf notify when address is unavailable") dc2b99f71ef477a31020511876ab4403fb7c4420 ("IPv6: keep permanent addresses on admin down") because the core semantic change to ipv6 address handling on ifdown has broken some things, in particular "disable_ipv6" sysctl handling. Stephen has made several attempts to get things back in working order, but nothing has restored disable_ipv6 fully yet. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24 07:27:15 +00:00
if (state != INET6_IFADDR_STATE_DEAD) {
__ipv6_ifa_notify(RTM_DELADDR, ifa);
atomic_notifier_call_chain(&inet6addr_chain, NETDEV_DOWN, ifa);
IPv6: keep tentative addresses in hash table When link goes down, want address to be preserved but in a tentative state, therefore it has to stay in hash list. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12 05:41:32 +00:00
}
ipv6: Revert 'administrative down' address handling changes. This reverts the following set of commits: d1ed113f1669390da9898da3beddcc058d938587 ("ipv6: remove duplicate neigh_ifdown") 29ba5fed1bbd09c2cba890798c8f9eaab251401d ("ipv6: don't flush routes when setting loopback down") 9d82ca98f71fd686ef2f3017c5e3e6a4871b6e46 ("ipv6: fix missing in6_ifa_put in addrconf") 2de795707294972f6c34bae9de713e502c431296 ("ipv6: addrconf: don't remove address state on ifdown if the address is being kept") 8595805aafc8b077e01804c9a3668e9aa3510e89 ("IPv6: only notify protocols if address is compeletely gone") 27bdb2abcc5edb3526e25407b74bf17d1872c329 ("IPv6: keep tentative addresses in hash table") 93fa159abe50d3c55c7f83622d3f5c09b6e06f4b ("IPv6: keep route for tentative address") 8f37ada5b5f6bfb4d251a7f510f249cb855b77b3 ("IPv6: fix race between cleanup and add/delete address") 84e8b803f1e16f3a2b8b80f80a63fa2f2f8a9be6 ("IPv6: addrconf notify when address is unavailable") dc2b99f71ef477a31020511876ab4403fb7c4420 ("IPv6: keep permanent addresses on admin down") because the core semantic change to ipv6 address handling on ifdown has broken some things, in particular "disable_ipv6" sysctl handling. Stephen has made several attempts to get things back in working order, but nothing has restored disable_ipv6 fully yet. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24 07:27:15 +00:00
in6_ifa_put(ifa);
IPv6: fix race between cleanup and add/delete address This solves a potential race problem during the cleanup process. The issue is that addrconf_ifdown() needs to traverse address list, but then drop lock to call the notifier. The version in -next could get confused if add/delete happened during this window. Original code (2.6.32 and earlier) was okay because all addresses were always deleted. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-03 08:19:59 +00:00
ipv6: Revert 'administrative down' address handling changes. This reverts the following set of commits: d1ed113f1669390da9898da3beddcc058d938587 ("ipv6: remove duplicate neigh_ifdown") 29ba5fed1bbd09c2cba890798c8f9eaab251401d ("ipv6: don't flush routes when setting loopback down") 9d82ca98f71fd686ef2f3017c5e3e6a4871b6e46 ("ipv6: fix missing in6_ifa_put in addrconf") 2de795707294972f6c34bae9de713e502c431296 ("ipv6: addrconf: don't remove address state on ifdown if the address is being kept") 8595805aafc8b077e01804c9a3668e9aa3510e89 ("IPv6: only notify protocols if address is compeletely gone") 27bdb2abcc5edb3526e25407b74bf17d1872c329 ("IPv6: keep tentative addresses in hash table") 93fa159abe50d3c55c7f83622d3f5c09b6e06f4b ("IPv6: keep route for tentative address") 8f37ada5b5f6bfb4d251a7f510f249cb855b77b3 ("IPv6: fix race between cleanup and add/delete address") 84e8b803f1e16f3a2b8b80f80a63fa2f2f8a9be6 ("IPv6: addrconf notify when address is unavailable") dc2b99f71ef477a31020511876ab4403fb7c4420 ("IPv6: keep permanent addresses on admin down") because the core semantic change to ipv6 address handling on ifdown has broken some things, in particular "disable_ipv6" sysctl handling. Stephen has made several attempts to get things back in working order, but nothing has restored disable_ipv6 fully yet. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24 07:27:15 +00:00
write_lock_bh(&idev->lock);
}
IPv6: fix race between cleanup and add/delete address This solves a potential race problem during the cleanup process. The issue is that addrconf_ifdown() needs to traverse address list, but then drop lock to call the notifier. The version in -next could get confused if add/delete happened during this window. Original code (2.6.32 and earlier) was okay because all addresses were always deleted. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-03 08:19:59 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
write_unlock_bh(&idev->lock);
/* Step 5: Discard multicast list */
[IPV6]: Event type in addrconf_ifdown is mis-used. addrconf_ifdown is broken in respect to the usage of how parameter. This function is called with (event != NETDEV_DOWN) and (2) on the IPv6 stop. It the latter case inet6_dev from loopback device should be destroyed. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-03 20:30:17 +00:00
if (how)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6_mc_destroy_dev(idev);
else
ipv6_mc_down(idev);
idev->tstamp = jiffies;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
/* Last: Shot the device (if unregistered) */
[IPV6]: Event type in addrconf_ifdown is mis-used. addrconf_ifdown is broken in respect to the usage of how parameter. This function is called with (event != NETDEV_DOWN) and (2) on the IPv6 stop. It the latter case inet6_dev from loopback device should be destroyed. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-03 20:30:17 +00:00
if (how) {
[NETNS]: Clean out the ipv6-related sysctls creation/destruction The addrconf sysctls and neigh sysctls are registered and unregistered always in pairs, so they can be joined into one (well, two) functions, that accept the struct inet6_dev and do all the job. This also get rids of unneeded ifdefs inside the code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:41:21 +00:00
addrconf_sysctl_unregister(idev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
neigh_parms_release(&nd_tbl, idev->nd_parms);
neigh_ifdown(&nd_tbl, dev);
in6_dev_put(idev);
}
return 0;
}
static void addrconf_rs_timer(unsigned long data)
{
struct inet6_ifaddr *ifp = (struct inet6_ifaddr *) data;
IPv6: addrconf timer race The Router Solicitation timer races with device state changes because it doesn't lock the device. Use local variable to avoid one repeated dereference. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 13:32:45 +00:00
struct inet6_dev *idev = ifp->idev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
IPv6: addrconf timer race The Router Solicitation timer races with device state changes because it doesn't lock the device. Use local variable to avoid one repeated dereference. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 13:32:45 +00:00
read_lock(&idev->lock);
if (idev->dead || !(idev->if_flags & IF_READY))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto out;
ipv6: Make 'addrconf_rs_timer' send Router Solicitations (and re-arm itself) if Router Advertisements are accepted As of 026359b [ipv6: Send ICMPv6 RSes only when RAs are accepted], Router Solicitations are sent whenever kernel accepts Router Advertisements on the interface. However, this logic isn't reflected in 'addrconf_rs_timer'. The timer fails to issue subsequent RS messages (and fails to re-arm itself) if forwarding is enabled and the special hybrid mode is enabled (accept_ra=2). Fix the condition determining whether next RS should be sent, by using 'ipv6_accept_ra()'. Reported-by: Ami Koren <amikoren@yahoo.com> Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-02 01:44:53 +00:00
if (!ipv6_accept_ra(idev))
IPv6: addrconf timer race The Router Solicitation timer races with device state changes because it doesn't lock the device. Use local variable to avoid one repeated dereference. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 13:32:45 +00:00
goto out;
/* Announcement received after solicitation was sent */
if (idev->if_flags & IF_RA_RCVD)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto out;
spin_lock(&ifp->lock);
IPv6: addrconf timer race The Router Solicitation timer races with device state changes because it doesn't lock the device. Use local variable to avoid one repeated dereference. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 13:32:45 +00:00
if (ifp->probes++ < idev->cnf.rtr_solicits) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* The wait after the last probe can be shorter */
addrconf_mod_timer(ifp, AC_RS,
IPv6: addrconf timer race The Router Solicitation timer races with device state changes because it doesn't lock the device. Use local variable to avoid one repeated dereference. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 13:32:45 +00:00
(ifp->probes == idev->cnf.rtr_solicits) ?
idev->cnf.rtr_solicit_delay :
idev->cnf.rtr_solicit_interval);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_unlock(&ifp->lock);
IPv6: addrconf timer race The Router Solicitation timer races with device state changes because it doesn't lock the device. Use local variable to avoid one repeated dereference. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 13:32:45 +00:00
ndisc_send_rs(idev->dev, &ifp->addr, &in6addr_linklocal_allrouters);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
} else {
spin_unlock(&ifp->lock);
/*
* Note: we do not support deprecated "all on-link"
* assumption any longer.
*/
net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debug Use the current debugging style and enable dynamic_debug. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:54 +00:00
pr_debug("%s: no IPv6 routers present\n", idev->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
out:
IPv6: addrconf timer race The Router Solicitation timer races with device state changes because it doesn't lock the device. Use local variable to avoid one repeated dereference. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 13:32:45 +00:00
read_unlock(&idev->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in6_ifa_put(ifp);
}
/*
* Duplicate Address Detection
*/
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
static void addrconf_dad_kick(struct inet6_ifaddr *ifp)
{
unsigned long rand_num;
struct inet6_dev *idev = ifp->idev;
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
if (ifp->flags & IFA_F_OPTIMISTIC)
rand_num = 0;
else
rand_num = net_random() % (idev->cnf.rtr_solicit_delay ? : 1);
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
ifp->probes = idev->cnf.dad_transmits;
addrconf_mod_timer(ifp, AC_DAD, rand_num);
}
ipv6: Remove unused argument to addrconf_dad_start(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 01:37:40 +00:00
static void addrconf_dad_start(struct inet6_ifaddr *ifp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct inet6_dev *idev = ifp->idev;
struct net_device *dev = idev->dev;
addrconf_join_solict(dev, &ifp->addr);
net_srandom(ifp->addr.s6_addr32[3]);
read_lock_bh(&idev->lock);
ipv6: Never schedule DAD timer on dead address This patch ensures that all places that schedule the DAD timer look at the address state in a safe manner before scheduling the timer. This ensures that we don't end up with pending timers after deleting an address. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:56:06 +00:00
spin_lock(&ifp->lock);
ipv6: Replace inet6_ifaddr->dead with state This patch replaces the boolean dead flag on inet6_ifaddr with a state enum. This allows us to roll back changes when deleting an address according to whether DAD has completed or not. This patch only adds the state field and does not change the logic. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:36:06 +00:00
if (ifp->state == INET6_IFADDR_STATE_DEAD)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto out;
if (dev->flags&(IFF_NOARP|IFF_LOOPBACK) ||
ipv6 addrconf: add accept_dad sysctl to control DAD operation. - If 0, disable DAD. - If 1, perform DAD (default). - If >1, perform DAD and disable IPv6 operation if DAD for MAC-based link-local address has been failed (RFC4862 5.4.5). We do not follow RFC4862 by default. Refer to the netdev thread entitled "Linux IPv6 DAD not full conform to RFC 4862 ?" http://www.spinics.net/lists/netdev/msg52027.html Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:18:38 +00:00
idev->cnf.accept_dad < 1 ||
[IPV6] ADDRCONF: Allow non-DAD'able addresses. IFA_F_NODAD flag, similar to IN6_IFF_NODAD in BSDs, is introduced to skip DAD. This flag should be set to Mobile IPv6 Home Address(es) on Mobile Node because DAD would fail if we should perform DAD; our Home Agent protects our Home Address(es). Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:45:27 +00:00
!(ifp->flags&IFA_F_TENTATIVE) ||
ifp->flags & IFA_F_NODAD) {
ipv6: Add IFA_F_DADFAILED flag Add IFA_F_DADFAILED flag to denote an IPv6 address that has failed Duplicate Address Detection, that way tools like /sbin/ip can be more informative. 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:db8::1/64 scope global tentative dadfailed valid_lft forever preferred_lft forever Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09 14:41:32 +00:00
ifp->flags &= ~(IFA_F_TENTATIVE|IFA_F_OPTIMISTIC|IFA_F_DADFAILED);
IPv6: remove trivial nested _bh suffix Don't need to disable bottom half it is already down in the previous lock. Move some blank lines to group locking in same context. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08 19:48:52 +00:00
spin_unlock(&ifp->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
read_unlock_bh(&idev->lock);
addrconf_dad_completed(ifp);
return;
}
[IPV6]: Fix addrconf dead lock. We need to release idev->lcok before we call addrconf_dad_stop(). It calls ipv6_addr_del(), which will hold idev->lock. Bug spotted by Yasuyuki KOZAKAI <yasuyuki.kozakai@toshiba.co.jp>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-27 21:35:15 +00:00
if (!(idev->if_flags & IF_READY)) {
IPv6: remove trivial nested _bh suffix Don't need to disable bottom half it is already down in the previous lock. Move some blank lines to group locking in same context. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08 19:48:52 +00:00
spin_unlock(&ifp->lock);
[IPV6]: Fix addrconf dead lock. We need to release idev->lcok before we call addrconf_dad_stop(). It calls ipv6_addr_del(), which will hold idev->lock. Bug spotted by Yasuyuki KOZAKAI <yasuyuki.kozakai@toshiba.co.jp>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-27 21:35:15 +00:00
read_unlock_bh(&idev->lock);
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
/*
trivial: Fix a typo in comment of addrconf_dad_start() Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-09 01:41:12 +00:00
* If the device is not ready:
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
* - keep it tentative if it is a permanent address.
* - otherwise, kill it.
*/
in6_ifa_hold(ifp);
ipv6: Add IFA_F_DADFAILED flag Add IFA_F_DADFAILED flag to denote an IPv6 address that has failed Duplicate Address Detection, that way tools like /sbin/ip can be more informative. 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:db8::1/64 scope global tentative dadfailed valid_lft forever preferred_lft forever Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09 14:41:32 +00:00
addrconf_dad_stop(ifp, 0);
[IPV6]: Fix addrconf dead lock. We need to release idev->lcok before we call addrconf_dad_stop(). It calls ipv6_addr_del(), which will hold idev->lock. Bug spotted by Yasuyuki KOZAKAI <yasuyuki.kozakai@toshiba.co.jp>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-27 21:35:15 +00:00
return;
[IPV6]: Defer IPv6 device initialization until the link becomes ready. NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:24 +00:00
}
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
/*
* Optimistic nodes can start receiving
* Frames right away
*/
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
if (ifp->flags & IFA_F_OPTIMISTIC)
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
ip6_ins_rt(ifp->rt);
[IPV6]: Fix addrconf dead lock. We need to release idev->lcok before we call addrconf_dad_stop(). It calls ipv6_addr_del(), which will hold idev->lock. Bug spotted by Yasuyuki KOZAKAI <yasuyuki.kozakai@toshiba.co.jp>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-27 21:35:15 +00:00
addrconf_dad_kick(ifp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
out:
ipv6: Never schedule DAD timer on dead address This patch ensures that all places that schedule the DAD timer look at the address state in a safe manner before scheduling the timer. This ensures that we don't end up with pending timers after deleting an address. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:56:06 +00:00
spin_unlock(&ifp->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
read_unlock_bh(&idev->lock);
}
static void addrconf_dad_timer(unsigned long data)
{
struct inet6_ifaddr *ifp = (struct inet6_ifaddr *) data;
struct inet6_dev *idev = ifp->idev;
struct in6_addr mcaddr;
ipv6: Use POSTDAD state This patch makes use of the new POSTDAD state. This prevents a race between DAD completion and failure. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:55:27 +00:00
if (!ifp->probes && addrconf_dad_end(ifp))
goto out;
IPv6: addrconf dad timer unnecessary bh_disable Timer code runs in bottom half, so there is no need for using _bh form of locking. Also check if device is not ready to avoid race with address that is no longer active. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 13:32:44 +00:00
read_lock(&idev->lock);
if (idev->dead || !(idev->if_flags & IF_READY)) {
read_unlock(&idev->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto out;
}
IPv6: remove trivial nested _bh suffix Don't need to disable bottom half it is already down in the previous lock. Move some blank lines to group locking in same context. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08 19:48:52 +00:00
spin_lock(&ifp->lock);
ipv6: Never schedule DAD timer on dead address This patch ensures that all places that schedule the DAD timer look at the address state in a safe manner before scheduling the timer. This ensures that we don't end up with pending timers after deleting an address. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:56:06 +00:00
if (ifp->state == INET6_IFADDR_STATE_DEAD) {
spin_unlock(&ifp->lock);
read_unlock(&idev->lock);
goto out;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (ifp->probes == 0) {
/*
* DAD was successful
*/
ipv6: Add IFA_F_DADFAILED flag Add IFA_F_DADFAILED flag to denote an IPv6 address that has failed Duplicate Address Detection, that way tools like /sbin/ip can be more informative. 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:db8::1/64 scope global tentative dadfailed valid_lft forever preferred_lft forever Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09 14:41:32 +00:00
ifp->flags &= ~(IFA_F_TENTATIVE|IFA_F_OPTIMISTIC|IFA_F_DADFAILED);
IPv6: remove trivial nested _bh suffix Don't need to disable bottom half it is already down in the previous lock. Move some blank lines to group locking in same context. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08 19:48:52 +00:00
spin_unlock(&ifp->lock);
IPv6: addrconf dad timer unnecessary bh_disable Timer code runs in bottom half, so there is no need for using _bh form of locking. Also check if device is not ready to avoid race with address that is no longer active. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 13:32:44 +00:00
read_unlock(&idev->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
addrconf_dad_completed(ifp);
goto out;
}
ifp->probes--;
addrconf_mod_timer(ifp, AC_DAD, ifp->idev->nd_parms->retrans_time);
IPv6: remove trivial nested _bh suffix Don't need to disable bottom half it is already down in the previous lock. Move some blank lines to group locking in same context. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08 19:48:52 +00:00
spin_unlock(&ifp->lock);
IPv6: addrconf dad timer unnecessary bh_disable Timer code runs in bottom half, so there is no need for using _bh form of locking. Also check if device is not ready to avoid race with address that is no longer active. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 13:32:44 +00:00
read_unlock(&idev->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* send a neighbour solicitation for our addr */
addrconf_addr_solict_mult(&ifp->addr, &mcaddr);
[IPV6]: Use in6addr_any where appropriate. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:11 +00:00
ndisc_send_ns(ifp->idev->dev, NULL, &ifp->addr, &mcaddr, &in6addr_any);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
out:
in6_ifa_put(ifp);
}
static void addrconf_dad_completed(struct inet6_ifaddr *ifp)
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
struct net_device *dev = ifp->idev->dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Configure the address for reception. Now it is valid.
*/
ipv6_ifa_notify(RTM_NEWADDR, ifp);
ipv6: Send ICMPv6 RSes only when RAs are accepted This patch improves the logic determining when to send ICMPv6 Router Solicitations, so that they are 1) always sent when the kernel is accepting Router Advertisements, and 2) never sent when the kernel is not accepting RAs. In other words, the operational setting of the "accept_ra" sysctl is used. The change also makes the special "Hybrid Router" forwarding mode ("forwarding" sysctl set to 2) operate exactly the same as the standard Router mode (forwarding=1). The only difference between the two was that RSes was being sent in the Hybrid Router mode only. The sysctl documentation describing the special Hybrid Router mode has therefore been removed. Rationale for the change: Currently, the value of forwarding sysctl is the only thing determining whether or not to send RSes. If it has the value 0 or 2, they are sent, otherwise they are not. This leads to inconsistent behaviour in the following cases: * accept_ra=0, forwarding=0 * accept_ra=0, forwarding=2 * accept_ra=1, forwarding=2 * accept_ra=2, forwarding=1 In the first three cases, the kernel will send RSes, even though it will not accept any RAs received in reply. In the last case, it will not send any RSes, even though it will accept and process any RAs received. (Most routers will send unsolicited RAs periodically, so suppressing RSes in the last case will merely delay auto-configuration, not prevent it.) Also, it is my opinion that having the forwarding sysctl control RS sending behaviour (completely independent of whether RAs are being accepted or not) is simply not what most users would intuitively expect to be the case. Signed-off-by: Tore Anderson <tore@fud.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-28 23:47:33 +00:00
/* If added prefix is link local and we are prepared to process
router advertisements, start sending router solicitations.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
ipv6: unify logic evaluating inet6_dev's accept_ra property As of 026359b [ipv6: Send ICMPv6 RSes only when RAs are accepted], the logic determining whether to send Router Solicitations is identical to the logic determining whether kernel accepts Router Advertisements. However the condition itself is repeated in several code locations. Unify it by introducing 'ipv6_accept_ra()' accessor. Also, simplify the condition expression, making it more readable. No semantic change. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30 10:25:59 +00:00
if (ipv6_accept_ra(ifp->idev) &&
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ifp->idev->cnf.rtr_solicits > 0 &&
(dev->flags&IFF_LOOPBACK) == 0 &&
(ipv6_addr_type(&ifp->addr) & IPV6_ADDR_LINKLOCAL)) {
/*
* If a host as already performed a random delay
* [...] as part of DAD [...] there is no need
* to delay again before sending the first RS
*/
[IPV6]: Define constants for link-local multicast addresses. - Define link-local all-node / all-router multicast addresses. - Remove ipv6_addr_all_nodes() and ipv6_addr_all_routers(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:11 +00:00
ndisc_send_rs(ifp->idev->dev, &ifp->addr, &in6addr_linklocal_allrouters);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_lock_bh(&ifp->lock);
ifp->probes = 1;
ifp->idev->if_flags |= IF_RS_SENT;
addrconf_mod_timer(ifp, AC_RS, ifp->idev->cnf.rtr_solicit_interval);
spin_unlock_bh(&ifp->lock);
}
}
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
static void addrconf_dad_run(struct inet6_dev *idev)
{
[IPV6]: Run DAD when the link becomes ready. If the link was not available when the interface was created, run DAD for pending tentative addresses when the link becomes ready. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:44 +00:00
struct inet6_ifaddr *ifp;
read_lock_bh(&idev->lock);
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
list_for_each_entry(ifp, &idev->addr_list, if_list) {
IPv6: remove trivial nested _bh suffix Don't need to disable bottom half it is already down in the previous lock. Move some blank lines to group locking in same context. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08 19:48:52 +00:00
spin_lock(&ifp->lock);
ipv6: Use POSTDAD state This patch makes use of the new POSTDAD state. This prevents a race between DAD completion and failure. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 22:55:27 +00:00
if (ifp->flags & IFA_F_TENTATIVE &&
ifp->state == INET6_IFADDR_STATE_DAD)
addrconf_dad_kick(ifp);
IPv6: remove trivial nested _bh suffix Don't need to disable bottom half it is already down in the previous lock. Move some blank lines to group locking in same context. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08 19:48:52 +00:00
spin_unlock(&ifp->lock);
[IPV6]: Run DAD when the link becomes ready. If the link was not available when the interface was created, run DAD for pending tentative addresses when the link becomes ready. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 13:57:44 +00:00
}
read_unlock_bh(&idev->lock);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_PROC_FS
struct if6_iter_state {
[NETNS][IPV6]: inet6_addr - isolate inet6 addresses from proc file Make /proc/net/if_inet6 show only inet6 addresses belonging to the namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:42:49 +00:00
struct seq_net_private p;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int bucket;
ipv6/addrconf: speedup /proc/net/if_inet6 filling This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565ddf52e401880f8ba51de0dff8ba51c99fd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 23:31:35 +00:00
int offset;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
ipv6/addrconf: speedup /proc/net/if_inet6 filling This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565ddf52e401880f8ba51de0dff8ba51c99fd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 23:31:35 +00:00
static struct inet6_ifaddr *if6_get_first(struct seq_file *seq, loff_t pos)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct inet6_ifaddr *ifa = NULL;
struct if6_iter_state *state = seq->private;
[NET] NETNS: Omit seq_net_private->net without CONFIG_NET_NS. Without CONFIG_NET_NS, no namespace other than &init_net exists, no need to store net in seq_net_private. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 17:36:06 +00:00
struct net *net = seq_file_net(seq);
ipv6/addrconf: speedup /proc/net/if_inet6 filling This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565ddf52e401880f8ba51de0dff8ba51c99fd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 23:31:35 +00:00
int p = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6/addrconf: speedup /proc/net/if_inet6 filling This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565ddf52e401880f8ba51de0dff8ba51c99fd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 23:31:35 +00:00
/* initial bucket if pos is 0 */
if (pos == 0) {
state->bucket = 0;
state->offset = 0;
}
for (; state->bucket < IN6_ADDR_HSIZE; ++state->bucket) {
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
struct hlist_node *n;
net: rcu fixes Add hlist_for_each_entry_rcu_bh() and hlist_for_each_entry_continue_rcu_bh() macros, and use them in ipv6_get_ifaddr(), if6_get_first() and if6_get_next() to fix lockdeps warnings. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 10:50:14 +00:00
hlist_for_each_entry_rcu_bh(ifa, n, &inet6_addr_lst[state->bucket],
ipv6/addrconf: speedup /proc/net/if_inet6 filling This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565ddf52e401880f8ba51de0dff8ba51c99fd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 23:31:35 +00:00
addr_lst) {
ipv6: addrconf: fix /proc/net/if_inet6 Commit 1d5783030a1 (ipv6/addrconf: speedup /proc/net/if_inet6 filling) added bugs hiding some devices from if_inet6 and breaking applications. "ip -6 addr" could still display all IPv6 addresses, while "ifconfig -a" couldnt. One way to reproduce the bug is by starting in a shell : unshare -n /bin/bash ifconfig lo up And in original net namespace, lo device disappeared from if_inet6 Reported-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Tested-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mihai Maruseac <mihai.maruseac@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16 07:37:27 +00:00
if (!net_eq(dev_net(ifa->idev->dev), net))
continue;
ipv6/addrconf: speedup /proc/net/if_inet6 filling This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565ddf52e401880f8ba51de0dff8ba51c99fd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 23:31:35 +00:00
/* sync with offset */
if (p < state->offset) {
p++;
continue;
}
state->offset++;
ipv6: addrconf: fix /proc/net/if_inet6 Commit 1d5783030a1 (ipv6/addrconf: speedup /proc/net/if_inet6 filling) added bugs hiding some devices from if_inet6 and breaking applications. "ip -6 addr" could still display all IPv6 addresses, while "ifconfig -a" couldnt. One way to reproduce the bug is by starting in a shell : unshare -n /bin/bash ifconfig lo up And in original net namespace, lo device disappeared from if_inet6 Reported-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Tested-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mihai Maruseac <mihai.maruseac@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16 07:37:27 +00:00
return ifa;
ipv6/addrconf: speedup /proc/net/if_inet6 filling This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565ddf52e401880f8ba51de0dff8ba51c99fd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 23:31:35 +00:00
}
/* prepare for next bucket */
state->offset = 0;
p = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
return NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
static struct inet6_ifaddr *if6_get_next(struct seq_file *seq,
struct inet6_ifaddr *ifa)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct if6_iter_state *state = seq->private;
[NET] NETNS: Omit seq_net_private->net without CONFIG_NET_NS. Without CONFIG_NET_NS, no namespace other than &init_net exists, no need to store net in seq_net_private. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 17:36:06 +00:00
struct net *net = seq_file_net(seq);
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
struct hlist_node *n = &ifa->addr_lst;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6/addrconf: speedup /proc/net/if_inet6 filling This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565ddf52e401880f8ba51de0dff8ba51c99fd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 23:31:35 +00:00
hlist_for_each_entry_continue_rcu_bh(ifa, n, addr_lst) {
ipv6: addrconf: fix /proc/net/if_inet6 Commit 1d5783030a1 (ipv6/addrconf: speedup /proc/net/if_inet6 filling) added bugs hiding some devices from if_inet6 and breaking applications. "ip -6 addr" could still display all IPv6 addresses, while "ifconfig -a" couldnt. One way to reproduce the bug is by starting in a shell : unshare -n /bin/bash ifconfig lo up And in original net namespace, lo device disappeared from if_inet6 Reported-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Tested-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mihai Maruseac <mihai.maruseac@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16 07:37:27 +00:00
if (!net_eq(dev_net(ifa->idev->dev), net))
continue;
ipv6/addrconf: speedup /proc/net/if_inet6 filling This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565ddf52e401880f8ba51de0dff8ba51c99fd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 23:31:35 +00:00
state->offset++;
ipv6: addrconf: fix /proc/net/if_inet6 Commit 1d5783030a1 (ipv6/addrconf: speedup /proc/net/if_inet6 filling) added bugs hiding some devices from if_inet6 and breaking applications. "ip -6 addr" could still display all IPv6 addresses, while "ifconfig -a" couldnt. One way to reproduce the bug is by starting in a shell : unshare -n /bin/bash ifconfig lo up And in original net namespace, lo device disappeared from if_inet6 Reported-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Tested-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mihai Maruseac <mihai.maruseac@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16 07:37:27 +00:00
return ifa;
ipv6/addrconf: speedup /proc/net/if_inet6 filling This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565ddf52e401880f8ba51de0dff8ba51c99fd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 23:31:35 +00:00
}
[NETNS][IPV6]: inet6_addr - isolate inet6 addresses from proc file Make /proc/net/if_inet6 show only inet6 addresses belonging to the namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:42:49 +00:00
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
while (++state->bucket < IN6_ADDR_HSIZE) {
ipv6/addrconf: speedup /proc/net/if_inet6 filling This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565ddf52e401880f8ba51de0dff8ba51c99fd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 23:31:35 +00:00
state->offset = 0;
net: rcu fixes Add hlist_for_each_entry_rcu_bh() and hlist_for_each_entry_continue_rcu_bh() macros, and use them in ipv6_get_ifaddr(), if6_get_first() and if6_get_next() to fix lockdeps warnings. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 10:50:14 +00:00
hlist_for_each_entry_rcu_bh(ifa, n,
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
&inet6_addr_lst[state->bucket], addr_lst) {
ipv6: addrconf: fix /proc/net/if_inet6 Commit 1d5783030a1 (ipv6/addrconf: speedup /proc/net/if_inet6 filling) added bugs hiding some devices from if_inet6 and breaking applications. "ip -6 addr" could still display all IPv6 addresses, while "ifconfig -a" couldnt. One way to reproduce the bug is by starting in a shell : unshare -n /bin/bash ifconfig lo up And in original net namespace, lo device disappeared from if_inet6 Reported-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Tested-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mihai Maruseac <mihai.maruseac@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16 07:37:27 +00:00
if (!net_eq(dev_net(ifa->idev->dev), net))
continue;
ipv6/addrconf: speedup /proc/net/if_inet6 filling This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565ddf52e401880f8ba51de0dff8ba51c99fd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 23:31:35 +00:00
state->offset++;
ipv6: addrconf: fix /proc/net/if_inet6 Commit 1d5783030a1 (ipv6/addrconf: speedup /proc/net/if_inet6 filling) added bugs hiding some devices from if_inet6 and breaking applications. "ip -6 addr" could still display all IPv6 addresses, while "ifconfig -a" couldnt. One way to reproduce the bug is by starting in a shell : unshare -n /bin/bash ifconfig lo up And in original net namespace, lo device disappeared from if_inet6 Reported-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Tested-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mihai Maruseac <mihai.maruseac@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16 07:37:27 +00:00
return ifa;
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[NETNS][IPV6]: inet6_addr - isolate inet6 addresses from proc file Make /proc/net/if_inet6 show only inet6 addresses belonging to the namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:42:49 +00:00
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
return NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static void *if6_seq_start(struct seq_file *seq, loff_t *pos)
net: rcu fixes Add hlist_for_each_entry_rcu_bh() and hlist_for_each_entry_continue_rcu_bh() macros, and use them in ipv6_get_ifaddr(), if6_get_first() and if6_get_next() to fix lockdeps warnings. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 10:50:14 +00:00
__acquires(rcu_bh)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
rcu_read_lock_bh();
ipv6/addrconf: speedup /proc/net/if_inet6 filling This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565ddf52e401880f8ba51de0dff8ba51c99fd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by: Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 23:31:35 +00:00
return if6_get_first(seq, *pos);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static void *if6_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
struct inet6_ifaddr *ifa;
ifa = if6_get_next(seq, v);
++*pos;
return ifa;
}
static void if6_seq_stop(struct seq_file *seq, void *v)
net: rcu fixes Add hlist_for_each_entry_rcu_bh() and hlist_for_each_entry_continue_rcu_bh() macros, and use them in ipv6_get_ifaddr(), if6_get_first() and if6_get_next() to fix lockdeps warnings. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 10:50:14 +00:00
__releases(rcu_bh)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
rcu_read_unlock_bh();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static int if6_seq_show(struct seq_file *seq, void *v)
{
struct inet6_ifaddr *ifp = (struct inet6_ifaddr *)v;
net: replace %#p6 format specifier with %pi6 gcc warns when using the # modifier with the %p format specifier, so we can't use this to omit the colons when needed, introduces %pi6 instead. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29 19:50:24 +00:00
seq_printf(seq, "%pi6 %02x %02x %02x %02x %8s\n",
net: replace all current users of NIP6_SEQFMT with %#p6 The define in kernel.h can be done away with at a later time. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28 23:05:40 +00:00
&ifp->addr,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ifp->idev->dev->ifindex,
ifp->prefix_len,
ifp->scope,
ifp->flags,
ifp->idev->dev->name);
return 0;
}
[NET]: Make all initialized struct seq_operations const. Make all initialized struct seq_operations in net/ const Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11 06:07:31 +00:00
static const struct seq_operations if6_seq_ops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.start = if6_seq_start,
.next = if6_seq_next,
.show = if6_seq_show,
.stop = if6_seq_stop,
};
static int if6_seq_open(struct inode *inode, struct file *file)
{
[NETNS][IPV6]: inet6_addr - isolate inet6 addresses from proc file Make /proc/net/if_inet6 show only inet6 addresses belonging to the namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:42:49 +00:00
return seq_open_net(inode, file, &if6_seq_ops,
sizeof(struct if6_iter_state));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[PATCH] mark struct file_operations const 7 Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 08:55:35 +00:00
static const struct file_operations if6_fops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.owner = THIS_MODULE,
.open = if6_seq_open,
.read = seq_read,
.llseek = seq_lseek,
[NETNS][IPV6]: inet6_addr - isolate inet6 addresses from proc file Make /proc/net/if_inet6 show only inet6 addresses belonging to the namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:42:49 +00:00
.release = seq_release_net,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
net: spread __net_init, __net_exit __net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-17 03:35:32 +00:00
static int __net_init if6_proc_net_init(struct net *net)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[NETNS][IPV6]: inet6_addr - isolate inet6 addresses from proc file Make /proc/net/if_inet6 show only inet6 addresses belonging to the namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:42:49 +00:00
if (!proc_net_fops_create(net, "if_inet6", S_IRUGO, &if6_fops))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -ENOMEM;
return 0;
}
net: spread __net_init, __net_exit __net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-17 03:35:32 +00:00
static void __net_exit if6_proc_net_exit(struct net *net)
[NETNS][IPV6]: inet6_addr - isolate inet6 addresses from proc file Make /proc/net/if_inet6 show only inet6 addresses belonging to the namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:42:49 +00:00
{
proc_net_remove(net, "if_inet6");
}
static struct pernet_operations if6_proc_net_ops = {
.init = if6_proc_net_init,
.exit = if6_proc_net_exit,
};
int __init if6_proc_init(void)
{
return register_pernet_subsys(&if6_proc_net_ops);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void if6_proc_exit(void)
{
[NETNS][IPV6]: inet6_addr - isolate inet6 addresses from proc file Make /proc/net/if_inet6 show only inet6 addresses belonging to the namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:42:49 +00:00
unregister_pernet_subsys(&if6_proc_net_ops);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#endif /* CONFIG_PROC_FS */
ipv6: use IS_ENABLED() #if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29 16:23:10 +00:00
#if IS_ENABLED(CONFIG_IPV6_MIP6)
[IPV6] ADDRCONF: Mobile IPv6 Home Address support. IFA_F_HOMEADDRESS is introduced for Mobile IPv6 Home Addresses on Mobile Node. The IFA_F_HOMEADDRESS flag should be set for Mobile IPv6 Home Addresses for 2 purposes. 1) We need to check this on receipt of Type 2 Routing Header (RFC3775 Secion 6.4), 2) We prefer Home Address(es) in source address selection (RFC3484 Section 5 Rule 4). Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:45:56 +00:00
/* Check if address is a home address configured on any interface. */
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 04:53:02 +00:00
int ipv6_chk_home_addr(struct net *net, const struct in6_addr *addr)
[IPV6] ADDRCONF: Mobile IPv6 Home Address support. IFA_F_HOMEADDRESS is introduced for Mobile IPv6 Home Addresses on Mobile Node. The IFA_F_HOMEADDRESS flag should be set for Mobile IPv6 Home Addresses for 2 purposes. 1) We need to check this on receipt of Type 2 Routing Header (RFC3775 Secion 6.4), 2) We prefer Home Address(es) in source address selection (RFC3484 Section 5 Rule 4). Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:45:56 +00:00
{
int ret = 0;
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
struct inet6_ifaddr *ifp = NULL;
struct hlist_node *n;
ipv6: add ipv6_addr_hash() helper Introduce ipv6_addr_hash() helper doing a XOR on all bits of an IPv6 address, with an optimized x86_64 version. Use it in flow dissector, as suggested by Andrew McGregor, to reduce hash collision probabilities in fq_codel (and other users of flow dissector) Use it in ip6_tunnel.c and use more bit shuffling, as suggested by David Laight, as existing hash was ignoring most of them. Use it in sunrpc and use more bit shuffling, using hash_32(). Use it in net/ipv6/addrconf.c, using hash_32() as well. As a cleanup, use it in net/ipv4/tcp_metrics.c Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrew McGregor <andrewmcgr@gmail.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Tom Herbert <therbert@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18 08:11:12 +00:00
unsigned int hash = inet6_addr_hash(addr);
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
rcu_read_lock_bh();
net: rcu fixes Add hlist_for_each_entry_rcu_bh() and hlist_for_each_entry_continue_rcu_bh() macros, and use them in ipv6_get_ifaddr(), if6_get_first() and if6_get_next() to fix lockdeps warnings. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 10:50:14 +00:00
hlist_for_each_entry_rcu_bh(ifp, n, &inet6_addr_lst[hash], addr_lst) {
[NET] NETNS: Omit namespace comparision without CONFIG_NET_NS. Introduce an inline net_eq() to compare two namespaces. Without CONFIG_NET_NS, since no namespace other than &init_net exists, it is always 1. We do not need to convert 1) inline vs inline and 2) inline vs &init_net comparisons. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 18:57:35 +00:00
if (!net_eq(dev_net(ifp->idev->dev), net))
[NETNS][IPV6]: inet6_addr - make ipv6_chk_home_addr namespace aware Looks if the address is belonging to the network namespace, otherwise discard the address for the check. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:44:40 +00:00
continue;
[IPV6]: Use ipv6_addr_equal() instead of !ipv6_addr_cmp(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 06:42:07 +00:00
if (ipv6_addr_equal(&ifp->addr, addr) &&
[IPV6] ADDRCONF: Mobile IPv6 Home Address support. IFA_F_HOMEADDRESS is introduced for Mobile IPv6 Home Addresses on Mobile Node. The IFA_F_HOMEADDRESS flag should be set for Mobile IPv6 Home Addresses for 2 purposes. 1) We need to check this on receipt of Type 2 Routing Header (RFC3775 Secion 6.4), 2) We prefer Home Address(es) in source address selection (RFC3484 Section 5 Rule 4). Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:45:56 +00:00
(ifp->flags & IFA_F_HOMEADDRESS)) {
ret = 1;
break;
}
}
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
rcu_read_unlock_bh();
[IPV6] ADDRCONF: Mobile IPv6 Home Address support. IFA_F_HOMEADDRESS is introduced for Mobile IPv6 Home Addresses on Mobile Node. The IFA_F_HOMEADDRESS flag should be set for Mobile IPv6 Home Addresses for 2 purposes. 1) We need to check this on receipt of Type 2 Routing Header (RFC3775 Secion 6.4), 2) We prefer Home Address(es) in source address selection (RFC3484 Section 5 Rule 4). Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:45:56 +00:00
return ret;
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Periodic address status verification
*/
static void addrconf_verify(unsigned long foo)
{
ipv6: Reduce timer events for addrconf_verify(). This patch reduces timer events while keeping accuracy by rounding our timer and/or batching several address validations in addrconf_verify(). addrconf_verify() is called at earliest timeout among interface addresses' timeouts, but at maximum ADDR_CHECK_FREQUENCY (120 secs). In most cases, all of timeouts of interface addresses are long enough (e.g. several hours or days vs 2 minutes), this timer is usually called every ADDR_CHECK_FREQUENCY, and it is okay to be lazy. (Note this timer could be eliminated if all code paths which modifies variables related to timeouts call us manually, but it is another story.) However, in other least but important cases, we try keeping accuracy. When the real interface address timeout is coming, and the timeout is just before the rounded timeout, we accept some error. When a timeout has been reached, we also try batching other several events in very near future. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:11:12 +00:00
unsigned long now, next, next_sec, next_sched;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct inet6_ifaddr *ifp;
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
struct hlist_node *node;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int i;
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
rcu_read_lock_bh();
spin_lock(&addrconf_verify_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
now = jiffies;
ipv6: Reduce timer events for addrconf_verify(). This patch reduces timer events while keeping accuracy by rounding our timer and/or batching several address validations in addrconf_verify(). addrconf_verify() is called at earliest timeout among interface addresses' timeouts, but at maximum ADDR_CHECK_FREQUENCY (120 secs). In most cases, all of timeouts of interface addresses are long enough (e.g. several hours or days vs 2 minutes), this timer is usually called every ADDR_CHECK_FREQUENCY, and it is okay to be lazy. (Note this timer could be eliminated if all code paths which modifies variables related to timeouts call us manually, but it is another story.) However, in other least but important cases, we try keeping accuracy. When the real interface address timeout is coming, and the timeout is just before the rounded timeout, we accept some error. When a timeout has been reached, we also try batching other several events in very near future. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:11:12 +00:00
next = round_jiffies_up(now + ADDR_CHECK_FREQUENCY);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
del_timer(&addr_chk_timer);
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
for (i = 0; i < IN6_ADDR_HSIZE; i++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
restart:
net: rcu fixes Add hlist_for_each_entry_rcu_bh() and hlist_for_each_entry_continue_rcu_bh() macros, and use them in ipv6_get_ifaddr(), if6_get_first() and if6_get_next() to fix lockdeps warnings. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 10:50:14 +00:00
hlist_for_each_entry_rcu_bh(ifp, node,
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
&inet6_addr_lst[i], addr_lst) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned long age;
if (ifp->flags & IFA_F_PERMANENT)
continue;
spin_lock(&ifp->lock);
ipv6: Reduce timer events for addrconf_verify(). This patch reduces timer events while keeping accuracy by rounding our timer and/or batching several address validations in addrconf_verify(). addrconf_verify() is called at earliest timeout among interface addresses' timeouts, but at maximum ADDR_CHECK_FREQUENCY (120 secs). In most cases, all of timeouts of interface addresses are long enough (e.g. several hours or days vs 2 minutes), this timer is usually called every ADDR_CHECK_FREQUENCY, and it is okay to be lazy. (Note this timer could be eliminated if all code paths which modifies variables related to timeouts call us manually, but it is another story.) However, in other least but important cases, we try keeping accuracy. When the real interface address timeout is coming, and the timeout is just before the rounded timeout, we accept some error. When a timeout has been reached, we also try batching other several events in very near future. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:11:12 +00:00
/* We try to batch several events at once. */
age = (now - ifp->tstamp + ADDRCONF_TIMER_FUZZ_MINUS) / HZ;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6] ADDRCONF: Do not verify an address with infinity lifetime We also do not try regenarating new temporary address corresponding to an address with infinite preferred lifetime. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:11 +00:00
if (ifp->valid_lft != INFINITY_LIFE_TIME &&
age >= ifp->valid_lft) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_unlock(&ifp->lock);
in6_ifa_hold(ifp);
ipv6_del_addr(ifp);
goto restart;
[IPV6] ADDRCONF: Do not verify an address with infinity lifetime We also do not try regenarating new temporary address corresponding to an address with infinite preferred lifetime. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:11 +00:00
} else if (ifp->prefered_lft == INFINITY_LIFE_TIME) {
spin_unlock(&ifp->lock);
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
} else if (age >= ifp->prefered_lft) {
IPv6: preferred lifetime of address not getting updated There's a bug in addrconf_prefix_rcv() where it won't update the preferred lifetime of an IPv6 address if the current valid lifetime of the address is less than 2 hours (the minimum value in the RA). For example, If I send a router advertisement with a prefix that has valid lifetime = preferred lifetime = 2 hours we'll build this address: 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:1890:1109:a20:217:8ff:fe7d:4718/64 scope global dynamic valid_lft 7175sec preferred_lft 7175sec If I then send the same prefix with valid lifetime = preferred lifetime = 0 it will be ignored since the minimum valid lifetime is 2 hours: 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:1890:1109:a20:217:8ff:fe7d:4718/64 scope global dynamic valid_lft 7161sec preferred_lft 7161sec But according to RFC 4862 we should always reset the preferred lifetime even if the valid lifetime is invalid, which would cause the address to immediately get deprecated. So with this patch we'd see this: 5: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2001:1890:1109:a20:21f:29ff:fe5a:ef04/64 scope global deprecated dynamic valid_lft 7163sec preferred_lft 0sec The comment winds-up being 5x the size of the code to fix the problem. Update the preferred lifetime of IPv6 addresses derived from a prefix info option in a router advertisement even if the valid lifetime in the option is invalid, as specified in RFC 4862 Section 5.5.3e. Fixes an issue where an address will not immediately become deprecated. Reported by Jens Rosenboom. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-02 07:10:52 +00:00
/* jiffies - ifp->tstamp > age >= ifp->prefered_lft */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int deprecate = 0;
if (!(ifp->flags&IFA_F_DEPRECATED)) {
deprecate = 1;
ifp->flags |= IFA_F_DEPRECATED;
}
if (time_before(ifp->tstamp + ifp->valid_lft * HZ, next))
next = ifp->tstamp + ifp->valid_lft * HZ;
spin_unlock(&ifp->lock);
if (deprecate) {
in6_ifa_hold(ifp);
ipv6_ifa_notify(0, ifp);
in6_ifa_put(ifp);
goto restart;
}
#ifdef CONFIG_IPV6_PRIVACY
} else if ((ifp->flags&IFA_F_TEMPORARY) &&
!(ifp->flags&IFA_F_TENTATIVE)) {
IPv6: addrconf cleanup addrconf_verify The variable regen_advance is only used in the privacy case. Move it to simplify code and eliminate ifdef's Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:17 +00:00
unsigned long regen_advance = ifp->idev->cnf.regen_max_retry *
ifp->idev->cnf.dad_transmits *
ifp->idev->nd_parms->retrans_time / HZ;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (age >= ifp->prefered_lft - regen_advance) {
struct inet6_ifaddr *ifpub = ifp->ifpub;
if (time_before(ifp->tstamp + ifp->prefered_lft * HZ, next))
next = ifp->tstamp + ifp->prefered_lft * HZ;
if (!ifp->regen_count && ifpub) {
ifp->regen_count++;
in6_ifa_hold(ifp);
in6_ifa_hold(ifpub);
spin_unlock(&ifp->lock);
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
[IPV6]: Fix Temporary Address Generation From: Hiroyuki YAMAMORI <h-yamamo@db3.so-net.ne.jp> Since regen_count is stored in the public address, we need to reset it when we start renewing temporary address. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-23 19:24:05 +00:00
spin_lock(&ifpub->lock);
ifpub->regen_count = 0;
spin_unlock(&ifpub->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6_create_tempaddr(ifpub, ifp);
in6_ifa_put(ifpub);
in6_ifa_put(ifp);
goto restart;
}
} else if (time_before(ifp->tstamp + ifp->prefered_lft * HZ - regen_advance * HZ, next))
next = ifp->tstamp + ifp->prefered_lft * HZ - regen_advance * HZ;
spin_unlock(&ifp->lock);
#endif
} else {
/* ifp->prefered_lft <= ifp->valid_lft */
if (time_before(ifp->tstamp + ifp->prefered_lft * HZ, next))
next = ifp->tstamp + ifp->prefered_lft * HZ;
spin_unlock(&ifp->lock);
}
}
}
ipv6: Reduce timer events for addrconf_verify(). This patch reduces timer events while keeping accuracy by rounding our timer and/or batching several address validations in addrconf_verify(). addrconf_verify() is called at earliest timeout among interface addresses' timeouts, but at maximum ADDR_CHECK_FREQUENCY (120 secs). In most cases, all of timeouts of interface addresses are long enough (e.g. several hours or days vs 2 minutes), this timer is usually called every ADDR_CHECK_FREQUENCY, and it is okay to be lazy. (Note this timer could be eliminated if all code paths which modifies variables related to timeouts call us manually, but it is another story.) However, in other least but important cases, we try keeping accuracy. When the real interface address timeout is coming, and the timeout is just before the rounded timeout, we accept some error. When a timeout has been reached, we also try batching other several events in very near future. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:11:12 +00:00
next_sec = round_jiffies_up(next);
next_sched = next;
/* If rounded timeout is accurate enough, accept it. */
if (time_before(next_sec, next + ADDRCONF_TIMER_FUZZ))
next_sched = next_sec;
/* And minimum interval is ADDRCONF_TIMER_FUZZ_MAX. */
if (time_before(next_sched, jiffies + ADDRCONF_TIMER_FUZZ_MAX))
next_sched = jiffies + ADDRCONF_TIMER_FUZZ_MAX;
ADBG((KERN_DEBUG "now = %lu, schedule = %lu, rounded schedule = %lu => %lu\n",
now, next, next_sec, next_sched));
addr_chk_timer.expires = next_sched;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
add_timer(&addr_chk_timer);
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
spin_unlock(&addrconf_verify_lock);
rcu_read_unlock_bh();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6] address: Convert address addition to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:09:49 +00:00
static struct in6_addr *extract_addr(struct nlattr *addr, struct nlattr *local)
{
struct in6_addr *pfx = NULL;
if (addr)
pfx = nla_data(addr);
if (local) {
if (pfx && nla_memcmp(local, pfx, sizeof(*pfx)))
pfx = NULL;
else
pfx = nla_data(local);
}
return pfx;
}
[NETLINK]: Mark netlink policies const Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-05 19:38:30 +00:00
static const struct nla_policy ifa_ipv6_policy[IFA_MAX+1] = {
[IPV6] address: Convert address addition to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:09:49 +00:00
[IFA_ADDRESS] = { .len = sizeof(struct in6_addr) },
[IFA_LOCAL] = { .len = sizeof(struct in6_addr) },
[IFA_CACHEINFO] = { .len = sizeof(struct ifa_cacheinfo) },
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int
inet6_rtm_deladdr(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
{
[NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS. Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 17:26:21 +00:00
struct net *net = sock_net(skb->sk);
[IPV6] address: Convert address deletion to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:10:19 +00:00
struct ifaddrmsg *ifm;
struct nlattr *tb[IFA_MAX+1];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct in6_addr *pfx;
[IPV6] address: Convert address deletion to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:10:19 +00:00
int err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6] address: Convert address deletion to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:10:19 +00:00
err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFA_MAX, ifa_ipv6_policy);
if (err < 0)
return err;
ifm = nlmsg_data(nlh);
pfx = extract_addr(tb[IFA_ADDRESS], tb[IFA_LOCAL]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (pfx == NULL)
return -EINVAL;
[NETNS][IPV6] addrconf - Pass the proper network namespace parameters to addrconf This patch propagates the network namespace pointer to the address configuration routines which need it, which means adding a new parameter to these functions, and make them use it instead of using the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:46:57 +00:00
return inet6_addr_del(net, ifm->ifa_index, pfx, ifm->ifa_prefixlen);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6] ADDRCONF: Allow non-DAD'able addresses. IFA_F_NODAD flag, similar to IN6_IFF_NODAD in BSDs, is introduced to skip DAD. This flag should be set to Mobile IPv6 Home Address(es) on Mobile Node because DAD would fail if we should perform DAD; our Home Agent protects our Home Address(es). Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:45:27 +00:00
static int inet6_addr_modify(struct inet6_ifaddr *ifp, u8 ifa_flags,
u32 prefered_lft, u32 valid_lft)
[IPV6] ADDRCONF: NLM_F_REPLACE support for RTM_NEWADDR Based on MIPL2 kernel patch. Signed-off-by: Noriaki YAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:13 +00:00
{
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
u32 flags;
clock_t expires;
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 08:37:49 +00:00
unsigned long timeout;
[IPV6] ADDRCONF: Manage prefix route corresponding to address manually added. It is more natural to manage prefix routes corresponding to address which is being added manually. With help from Masafumi Aramoto <aramoto@linux-ipv6.org>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-02-07 11:36:26 +00:00
[IPV6] ADDRCONF: NLM_F_REPLACE support for RTM_NEWADDR Based on MIPL2 kernel patch. Signed-off-by: Noriaki YAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:13 +00:00
if (!valid_lft || (prefered_lft > valid_lft))
return -EINVAL;
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 08:37:49 +00:00
timeout = addrconf_timeout_fixup(valid_lft, HZ);
if (addrconf_finite_timeout(timeout)) {
expires = jiffies_to_clock_t(timeout * HZ);
valid_lft = timeout;
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
flags = RTF_EXPIRES;
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 08:37:49 +00:00
} else {
expires = 0;
flags = 0;
ifa_flags |= IFA_F_PERMANENT;
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
}
[IPV6] ADDRCONF: NLM_F_REPLACE support for RTM_NEWADDR Based on MIPL2 kernel patch. Signed-off-by: Noriaki YAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:13 +00:00
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 08:37:49 +00:00
timeout = addrconf_timeout_fixup(prefered_lft, HZ);
if (addrconf_finite_timeout(timeout)) {
if (timeout == 0)
ifa_flags |= IFA_F_DEPRECATED;
prefered_lft = timeout;
}
[IPV6] ADDRCONF: NLM_F_REPLACE support for RTM_NEWADDR Based on MIPL2 kernel patch. Signed-off-by: Noriaki YAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:13 +00:00
spin_lock_bh(&ifp->lock);
[IPV6] ADDRCONF: Mobile IPv6 Home Address support. IFA_F_HOMEADDRESS is introduced for Mobile IPv6 Home Addresses on Mobile Node. The IFA_F_HOMEADDRESS flag should be set for Mobile IPv6 Home Addresses for 2 purposes. 1) We need to check this on receipt of Type 2 Routing Header (RFC3775 Secion 6.4), 2) We prefer Home Address(es) in source address selection (RFC3484 Section 5 Rule 4). Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:45:56 +00:00
ifp->flags = (ifp->flags & ~(IFA_F_DEPRECATED | IFA_F_PERMANENT | IFA_F_NODAD | IFA_F_HOMEADDRESS)) | ifa_flags;
[IPV6] ADDRCONF: NLM_F_REPLACE support for RTM_NEWADDR Based on MIPL2 kernel patch. Signed-off-by: Noriaki YAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:13 +00:00
ifp->tstamp = jiffies;
ifp->valid_lft = valid_lft;
ifp->prefered_lft = prefered_lft;
spin_unlock_bh(&ifp->lock);
if (!(ifp->flags&IFA_F_TENTATIVE))
ipv6_ifa_notify(0, ifp);
[IPV6] ADDRCONF: Manage prefix route corresponding to address manually added. It is more natural to manage prefix routes corresponding to address which is being added manually. With help from Masafumi Aramoto <aramoto@linux-ipv6.org>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-02-07 11:36:26 +00:00
addrconf_prefix_route(&ifp->addr, ifp->prefix_len, ifp->idev->dev,
ipv6 addrconf: Allow infinite prefix lifetime. We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:56:11 +00:00
expires, flags);
[IPV6] ADDRCONF: NLM_F_REPLACE support for RTM_NEWADDR Based on MIPL2 kernel patch. Signed-off-by: Noriaki YAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:13 +00:00
addrconf_verify(0);
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int
inet6_rtm_newaddr(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
{
[NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS. Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 17:26:21 +00:00
struct net *net = sock_net(skb->sk);
[IPV6] address: Convert address addition to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:09:49 +00:00
struct ifaddrmsg *ifm;
struct nlattr *tb[IFA_MAX+1];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct in6_addr *pfx;
[IPV6] address: Support NLM_F_EXCL when adding addresses iproute2 doesn't provide the NLM_F_CREATE flag when adding addresses, it is assumed to be implied. The existing code issues a check on said flag when the modify operation fails (likely due to ENOENT) before continueing to create it, this leads to a hard to predict result, therefore the NLM_F_CREATE check is removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:13:46 +00:00
struct inet6_ifaddr *ifa;
struct net_device *dev;
[IPV6] ADDRCONF: Allow non-DAD'able addresses. IFA_F_NODAD flag, similar to IN6_IFF_NODAD in BSDs, is introduced to skip DAD. This flag should be set to Mobile IPv6 Home Address(es) on Mobile Node because DAD would fail if we should perform DAD; our Home Agent protects our Home Address(es). Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:45:27 +00:00
u32 valid_lft = INFINITY_LIFE_TIME, preferred_lft = INFINITY_LIFE_TIME;
u8 ifa_flags;
[IPV6] address: Convert address addition to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:09:49 +00:00
int err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6] address: Convert address addition to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:09:49 +00:00
err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFA_MAX, ifa_ipv6_policy);
if (err < 0)
return err;
ifm = nlmsg_data(nlh);
pfx = extract_addr(tb[IFA_ADDRESS], tb[IFA_LOCAL]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (pfx == NULL)
return -EINVAL;
[IPV6] address: Convert address addition to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:09:49 +00:00
if (tb[IFA_CACHEINFO]) {
[IPV6] ADDRCONF: Allow user-space to specify address lifetime Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:10 +00:00
struct ifa_cacheinfo *ci;
[IPV6] address: Convert address addition to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:09:49 +00:00
ci = nla_data(tb[IFA_CACHEINFO]);
[IPV6] ADDRCONF: Allow user-space to specify address lifetime Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:10 +00:00
valid_lft = ci->ifa_valid;
[IPV6] address: Convert address addition to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:09:49 +00:00
preferred_lft = ci->ifa_prefered;
} else {
preferred_lft = INFINITY_LIFE_TIME;
valid_lft = INFINITY_LIFE_TIME;
[IPV6] ADDRCONF: Allow user-space to specify address lifetime Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:10 +00:00
}
[NETNS][IPV6] addrconf - Pass the proper network namespace parameters to addrconf This patch propagates the network namespace pointer to the address configuration routines which need it, which means adding a new parameter to these functions, and make them use it instead of using the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:46:57 +00:00
dev = __dev_get_by_index(net, ifm->ifa_index);
[IPV6] address: Support NLM_F_EXCL when adding addresses iproute2 doesn't provide the NLM_F_CREATE flag when adding addresses, it is assumed to be implied. The existing code issues a check on said flag when the modify operation fails (likely due to ENOENT) before continueing to create it, this leads to a hard to predict result, therefore the NLM_F_CREATE check is removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:13:46 +00:00
if (dev == NULL)
return -ENODEV;
[IPV6] ADDRCONF: Allow non-DAD'able addresses. IFA_F_NODAD flag, similar to IN6_IFF_NODAD in BSDs, is introduced to skip DAD. This flag should be set to Mobile IPv6 Home Address(es) on Mobile Node because DAD would fail if we should perform DAD; our Home Agent protects our Home Address(es). Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:45:27 +00:00
/* We ignore other flags so far. */
[IPV6] ADDRCONF: Mobile IPv6 Home Address support. IFA_F_HOMEADDRESS is introduced for Mobile IPv6 Home Addresses on Mobile Node. The IFA_F_HOMEADDRESS flag should be set for Mobile IPv6 Home Addresses for 2 purposes. 1) We need to check this on receipt of Type 2 Routing Header (RFC3775 Secion 6.4), 2) We prefer Home Address(es) in source address selection (RFC3484 Section 5 Rule 4). Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:45:56 +00:00
ifa_flags = ifm->ifa_flags & (IFA_F_NODAD | IFA_F_HOMEADDRESS);
[IPV6] ADDRCONF: Allow non-DAD'able addresses. IFA_F_NODAD flag, similar to IN6_IFF_NODAD in BSDs, is introduced to skip DAD. This flag should be set to Mobile IPv6 Home Address(es) on Mobile Node because DAD would fail if we should perform DAD; our Home Agent protects our Home Address(es). Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:45:27 +00:00
[NETNS][IPV6]: inet6_addr - ipv6_get_ifaddr namespace aware The inet6_addr_lst is browsed taking into account the network namespace specified as parameter. If an address does not belong to the specified namespace, it is ignored. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 06:44:09 +00:00
ifa = ipv6_get_ifaddr(net, pfx, dev, 1);
[IPV6] address: Support NLM_F_EXCL when adding addresses iproute2 doesn't provide the NLM_F_CREATE flag when adding addresses, it is assumed to be implied. The existing code issues a check on said flag when the modify operation fails (likely due to ENOENT) before continueing to create it, this leads to a hard to predict result, therefore the NLM_F_CREATE check is removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:13:46 +00:00
if (ifa == NULL) {
/*
* It would be best to check for !NLM_F_CREATE here but
* userspace alreay relies on not having to provide this.
*/
[NETNS][IPV6] addrconf - Pass the proper network namespace parameters to addrconf This patch propagates the network namespace pointer to the address configuration routines which need it, which means adding a new parameter to these functions, and make them use it instead of using the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:46:57 +00:00
return inet6_addr_add(net, ifm->ifa_index, pfx,
ifm->ifa_prefixlen, ifa_flags,
preferred_lft, valid_lft);
[IPV6] ADDRCONF: NLM_F_REPLACE support for RTM_NEWADDR Based on MIPL2 kernel patch. Signed-off-by: Noriaki YAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:13 +00:00
}
[IPV6] address: Support NLM_F_EXCL when adding addresses iproute2 doesn't provide the NLM_F_CREATE flag when adding addresses, it is assumed to be implied. The existing code issues a check on said flag when the modify operation fails (likely due to ENOENT) before continueing to create it, this leads to a hard to predict result, therefore the NLM_F_CREATE check is removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:13:46 +00:00
if (nlh->nlmsg_flags & NLM_F_EXCL ||
!(nlh->nlmsg_flags & NLM_F_REPLACE))
err = -EEXIST;
else
[IPV6] ADDRCONF: Allow non-DAD'able addresses. IFA_F_NODAD flag, similar to IN6_IFF_NODAD in BSDs, is introduced to skip DAD. This flag should be set to Mobile IPv6 Home Address(es) on Mobile Node because DAD would fail if we should perform DAD; our Home Agent protects our Home Address(es). Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:45:27 +00:00
err = inet6_addr_modify(ifa, ifa_flags, preferred_lft, valid_lft);
[IPV6] address: Support NLM_F_EXCL when adding addresses iproute2 doesn't provide the NLM_F_CREATE flag when adding addresses, it is assumed to be implied. The existing code issues a check on said flag when the modify operation fails (likely due to ENOENT) before continueing to create it, this leads to a hard to predict result, therefore the NLM_F_CREATE check is removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:13:46 +00:00
in6_ifa_put(ifa);
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6] address: Add put_ifaddrmsg() and rt_scope() Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:11:52 +00:00
static void put_ifaddrmsg(struct nlmsghdr *nlh, u8 prefixlen, u8 flags,
u8 scope, int ifindex)
{
struct ifaddrmsg *ifm;
ifm = nlmsg_data(nlh);
ifm->ifa_family = AF_INET6;
ifm->ifa_prefixlen = prefixlen;
ifm->ifa_flags = flags;
ifm->ifa_scope = scope;
ifm->ifa_index = ifindex;
}
[IPV6] address: Add put_cacheinfo() to dump struct cacheinfo Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:11:24 +00:00
static int put_cacheinfo(struct sk_buff *skb, unsigned long cstamp,
unsigned long tstamp, u32 preferred, u32 valid)
{
struct ifa_cacheinfo ci;
ipv6: Expose reachable and retrans timer values as msecs Expose reachable and retrans timer values in msecs instead of jiffies. Both timer values are already exposed as msecs in the neighbour table netlink interface. The creation timestamp format with increased precision is kept but cleaned up. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 04:12:02 +00:00
ci.cstamp = cstamp_delta(cstamp);
ci.tstamp = cstamp_delta(tstamp);
[IPV6] address: Add put_cacheinfo() to dump struct cacheinfo Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:11:24 +00:00
ci.ifa_prefered = preferred;
ci.ifa_valid = valid;
return nla_put(skb, IFA_CACHEINFO, sizeof(ci), &ci);
}
[IPV6] address: Add put_ifaddrmsg() and rt_scope() Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:11:52 +00:00
static inline int rt_scope(int ifa_scope)
{
if (ifa_scope & IFA_HOST)
return RT_SCOPE_HOST;
else if (ifa_scope & IFA_LINK)
return RT_SCOPE_LINK;
else if (ifa_scope & IFA_SITE)
return RT_SCOPE_SITE;
else
return RT_SCOPE_UNIVERSE;
}
[IPV6] address: Convert address dumping to new netlink api Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:12:35 +00:00
static inline int inet6_ifaddr_msgsize(void)
{
[NETLINK]: Do precise netlink message allocations where possible Account for the netlink message header size directly in nlmsg_new() instead of relying on the caller calculate it correctly. Replaces error handling of message construction functions when constructing notifications with bug traps since a failure implies a bug in calculating the size of the skb. Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-10 22:10:15 +00:00
return NLMSG_ALIGN(sizeof(struct ifaddrmsg))
+ nla_total_size(16) /* IFA_ADDRESS */
+ nla_total_size(sizeof(struct ifa_cacheinfo));
[IPV6] address: Convert address dumping to new netlink api Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:12:35 +00:00
}
[IPV6]: Sum real space for RTAs. This patch fixes RTNLGRP_IPV6_IFINFO netlink notifications. Issue pointed out by Patrick McHardy <kaber@trash.net>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18 05:48:48 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int inet6_fill_ifaddr(struct sk_buff *skb, struct inet6_ifaddr *ifa,
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
u32 portid, u32 seq, int event, unsigned int flags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct nlmsghdr *nlh;
[IPV6] address: Add put_cacheinfo() to dump struct cacheinfo Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:11:24 +00:00
u32 preferred, valid;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
nlh = nlmsg_put(skb, portid, seq, event, sizeof(struct ifaddrmsg), flags);
[IPV6] address: Convert address dumping to new netlink api Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:12:35 +00:00
if (nlh == NULL)
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
return -EMSGSIZE;
[IPV6] address: Convert address dumping to new netlink api Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:12:35 +00:00
[IPV6] address: Add put_ifaddrmsg() and rt_scope() Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:11:52 +00:00
put_ifaddrmsg(nlh, ifa->prefix_len, ifa->flags, rt_scope(ifa->scope),
ifa->idev->dev->ifindex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!(ifa->flags&IFA_F_PERMANENT)) {
[IPV6] address: Add put_cacheinfo() to dump struct cacheinfo Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:11:24 +00:00
preferred = ifa->prefered_lft;
valid = ifa->valid_lft;
if (preferred != INFINITY_LIFE_TIME) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
long tval = (jiffies - ifa->tstamp)/HZ;
ipv6: avoid wraparound for expired preferred lifetime Avoid showing wrong high values when the preferred lifetime of an address is expired. Signed-off-by: Jens Rosenboom <me@jayr.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 04:55:50 +00:00
if (preferred > tval)
preferred -= tval;
else
preferred = 0;
ipv6: Clamp reported valid_lft to a minimum of 0 Since addresses are only revalidated every 2 minutes, the reported valid_lft can underflow shortly before the address is deleted. Clamp it to a minimum of 0, as for prefered_lft. Reported-by: Piotr Lewandowski <piotr.lewandowski@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-26 11:37:47 +00:00
if (valid != INFINITY_LIFE_TIME) {
if (valid > tval)
valid -= tval;
else
valid = 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
} else {
[IPV6] address: Add put_cacheinfo() to dump struct cacheinfo Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:11:24 +00:00
preferred = INFINITY_LIFE_TIME;
valid = INFINITY_LIFE_TIME;
}
[IPV6] address: Convert address dumping to new netlink api Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:12:35 +00:00
if (nla_put(skb, IFA_ADDRESS, 16, &ifa->addr) < 0 ||
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
put_cacheinfo(skb, ifa->cstamp, ifa->tstamp, preferred, valid) < 0) {
nlmsg_cancel(skb, nlh);
return -EMSGSIZE;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6] address: Convert address dumping to new netlink api Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:12:35 +00:00
return nlmsg_end(skb, nlh);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static int inet6_fill_ifmcaddr(struct sk_buff *skb, struct ifmcaddr6 *ifmca,
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
u32 portid, u32 seq, int event, u16 flags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct nlmsghdr *nlh;
[IPV6] address: Add put_ifaddrmsg() and rt_scope() Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:11:52 +00:00
u8 scope = RT_SCOPE_UNIVERSE;
int ifindex = ifmca->idev->dev->ifindex;
if (ipv6_addr_scope(&ifmca->mca_addr) & IFA_SITE)
scope = RT_SCOPE_SITE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
nlh = nlmsg_put(skb, portid, seq, event, sizeof(struct ifaddrmsg), flags);
[IPV6] address: Convert address dumping to new netlink api Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:12:35 +00:00
if (nlh == NULL)
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
return -EMSGSIZE;
[IPV6] address: Add put_cacheinfo() to dump struct cacheinfo Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:11:24 +00:00
[IPV6] address: Convert address dumping to new netlink api Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:12:35 +00:00
put_ifaddrmsg(nlh, 128, IFA_F_PERMANENT, scope, ifindex);
if (nla_put(skb, IFA_MULTICAST, 16, &ifmca->mca_addr) < 0 ||
put_cacheinfo(skb, ifmca->mca_cstamp, ifmca->mca_tstamp,
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
INFINITY_LIFE_TIME, INFINITY_LIFE_TIME) < 0) {
nlmsg_cancel(skb, nlh);
return -EMSGSIZE;
}
[IPV6] address: Add put_cacheinfo() to dump struct cacheinfo Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:11:24 +00:00
[IPV6] address: Convert address dumping to new netlink api Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:12:35 +00:00
return nlmsg_end(skb, nlh);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static int inet6_fill_ifacaddr(struct sk_buff *skb, struct ifacaddr6 *ifaca,
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
u32 portid, u32 seq, int event, unsigned int flags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct nlmsghdr *nlh;
[IPV6] address: Add put_ifaddrmsg() and rt_scope() Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:11:52 +00:00
u8 scope = RT_SCOPE_UNIVERSE;
int ifindex = ifaca->aca_idev->dev->ifindex;
if (ipv6_addr_scope(&ifaca->aca_addr) & IFA_SITE)
scope = RT_SCOPE_SITE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
nlh = nlmsg_put(skb, portid, seq, event, sizeof(struct ifaddrmsg), flags);
[IPV6] address: Convert address dumping to new netlink api Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:12:35 +00:00
if (nlh == NULL)
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
return -EMSGSIZE;
[IPV6] address: Add put_cacheinfo() to dump struct cacheinfo Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:11:24 +00:00
[IPV6] address: Convert address dumping to new netlink api Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:12:35 +00:00
put_ifaddrmsg(nlh, 128, IFA_F_PERMANENT, scope, ifindex);
if (nla_put(skb, IFA_ANYCAST, 16, &ifaca->aca_addr) < 0 ||
put_cacheinfo(skb, ifaca->aca_cstamp, ifaca->aca_tstamp,
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
INFINITY_LIFE_TIME, INFINITY_LIFE_TIME) < 0) {
nlmsg_cancel(skb, nlh);
return -EMSGSIZE;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6] address: Convert address dumping to new netlink api Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:12:35 +00:00
return nlmsg_end(skb, nlh);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
enum addr_type_t {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
UNICAST_ADDR,
MULTICAST_ADDR,
ANYCAST_ADDR,
};
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
/* called with rcu_read_lock() */
static int in6_dump_addrs(struct inet6_dev *idev, struct sk_buff *skb,
struct netlink_callback *cb, enum addr_type_t type,
int s_ip_idx, int *p_ip_idx)
{
struct ifmcaddr6 *ifmca;
struct ifacaddr6 *ifaca;
int err = 1;
int ip_idx = *p_ip_idx;
read_lock_bh(&idev->lock);
switch (type) {
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
case UNICAST_ADDR: {
struct inet6_ifaddr *ifa;
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
/* unicast address incl. temp addr */
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
list_for_each_entry(ifa, &idev->addr_list, if_list) {
if (++ip_idx < s_ip_idx)
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
continue;
err = inet6_fill_ifaddr(skb, ifa,
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
NETLINK_CB(cb->skb).portid,
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
cb->nlh->nlmsg_seq,
RTM_NEWADDR,
NLM_F_MULTI);
if (err <= 0)
break;
}
break;
ipv6: convert idev_list to list macros Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:13 +00:00
}
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
case MULTICAST_ADDR:
/* multicast address */
for (ifmca = idev->mc_list; ifmca;
ifmca = ifmca->next, ip_idx++) {
if (ip_idx < s_ip_idx)
continue;
err = inet6_fill_ifmcaddr(skb, ifmca,
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
NETLINK_CB(cb->skb).portid,
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
cb->nlh->nlmsg_seq,
RTM_GETMULTICAST,
NLM_F_MULTI);
if (err <= 0)
break;
}
break;
case ANYCAST_ADDR:
/* anycast address */
for (ifaca = idev->ac_list; ifaca;
ifaca = ifaca->aca_next, ip_idx++) {
if (ip_idx < s_ip_idx)
continue;
err = inet6_fill_ifacaddr(skb, ifaca,
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
NETLINK_CB(cb->skb).portid,
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
cb->nlh->nlmsg_seq,
RTM_GETANYCAST,
NLM_F_MULTI);
if (err <= 0)
break;
}
break;
default:
break;
}
read_unlock_bh(&idev->lock);
*p_ip_idx = ip_idx;
return err;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int inet6_dump_addr(struct sk_buff *skb, struct netlink_callback *cb,
enum addr_type_t type)
{
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
struct net *net = sock_net(skb->sk);
int h, s_h;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int idx, ip_idx;
int s_idx, s_ip_idx;
struct net_device *dev;
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
struct inet6_dev *idev;
struct hlist_head *head;
struct hlist_node *node;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
s_h = cb->args[0];
s_idx = idx = cb->args[1];
s_ip_idx = ip_idx = cb->args[2];
[IPV6] ADDRCONF: Sparse: Make inet6_dump_addr() code paths more straight-forward. Fix the following sparse warning: | net/ipv6/addrconf.c:3384:2: warning: context imbalance in 'inet6_dump_addr' - different lock contexts for basic block Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-01-22 08:29:40 +00:00
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
rcu_read_lock();
for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
idx = 0;
head = &net->dev_index_head[h];
hlist_for_each_entry_rcu(dev, node, head, index_hlist) {
if (idx < s_idx)
goto cont;
net: fix netlink address dumping in IPv4/IPv6 When a dump is interrupted at the last device in a hash chain and then continued, "idx" won't get incremented past s_idx, so s_ip_idx is not reset when moving on to the next device. This means of all following devices only the last n - s_ip_idx addresses are dumped. Tested-by: Pawel Staszewski <pstaszewski@itcare.pl> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-03-27 03:27:49 +00:00
if (h > s_h || idx > s_idx)
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
s_ip_idx = 0;
ip_idx = 0;
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
idev = __in6_dev_get(dev);
if (!idev)
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
goto cont;
if (in6_dump_addrs(idev, skb, cb, type,
s_ip_idx, &ip_idx) <= 0)
goto done;
[NET]: Rework dev_base via list_head (v3) Cleanup of dev_base list use, with the aim to simplify making device list per-namespace. In almost every occasion, use of dev_base variable and dev->next pointer could be easily replaced by for_each_netdev loop. A few most complicated places were converted to using first_netdev()/next_netdev(). Signed-off-by: Pavel Emelianov <xemul@openvz.org> Acked-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03 22:13:45 +00:00
cont:
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
idx++;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv6: speedup inet6_dump_addr() When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 04:11:50 +00:00
done:
rcu_read_unlock();
cb->args[0] = h;
cb->args[1] = idx;
cb->args[2] = ip_idx;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return skb->len;
}
static int inet6_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb)
{
enum addr_type_t type = UNICAST_ADDR;
[NET]: Modify all rtnetlink methods to only work in the initial namespace (v2) Before I can enable rtnetlink to work in all network namespaces I need to be certain that something won't break. So this patch deliberately disables all of the rtnletlink methods in everything except the initial network namespace. After the methods have been audited this extra check can be disabled. Changes from v1: - added IPv6 addrlabel protection Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-30 13:21:31 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return inet6_dump_addr(skb, cb, type);
}
static int inet6_dump_ifmcaddr(struct sk_buff *skb, struct netlink_callback *cb)
{
enum addr_type_t type = MULTICAST_ADDR;
[NET]: Modify all rtnetlink methods to only work in the initial namespace (v2) Before I can enable rtnetlink to work in all network namespaces I need to be certain that something won't break. So this patch deliberately disables all of the rtnletlink methods in everything except the initial network namespace. After the methods have been audited this extra check can be disabled. Changes from v1: - added IPv6 addrlabel protection Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-30 13:21:31 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return inet6_dump_addr(skb, cb, type);
}
static int inet6_dump_ifacaddr(struct sk_buff *skb, struct netlink_callback *cb)
{
enum addr_type_t type = ANYCAST_ADDR;
[NET]: Modify all rtnetlink methods to only work in the initial namespace (v2) Before I can enable rtnetlink to work in all network namespaces I need to be certain that something won't break. So this patch deliberately disables all of the rtnletlink methods in everything except the initial network namespace. After the methods have been audited this extra check can be disabled. Changes from v1: - added IPv6 addrlabel protection Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-30 13:21:31 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return inet6_dump_addr(skb, cb, type);
}
net/ipv6/addrconf.c: Checkpatch cleanups net/ipv6/addrconf.c:340: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:342: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:444: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:1337: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:1526: ERROR: "(foo*)" should be "(foo *)" net/ipv6/addrconf.c:1671: ERROR: open brace '{' following function declarations go on the next line net/ipv6/addrconf.c:1914: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2368: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2370: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2416: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2437: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2573: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:3797: ERROR: "foo* bar" should be "foo *bar" Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 07:49:08 +00:00
static int inet6_rtm_getaddr(struct sk_buff *in_skb, struct nlmsghdr *nlh,
[IPV6] address: Convert address lookup to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:10:50 +00:00
void *arg)
[IPV6] ADDRCONF: Support get operation of single address Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:12 +00:00
{
[NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS. Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 17:26:21 +00:00
struct net *net = sock_net(in_skb->sk);
[IPV6] address: Convert address lookup to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:10:50 +00:00
struct ifaddrmsg *ifm;
struct nlattr *tb[IFA_MAX+1];
[IPV6] ADDRCONF: Support get operation of single address Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:12 +00:00
struct in6_addr *addr = NULL;
struct net_device *dev = NULL;
struct inet6_ifaddr *ifa;
struct sk_buff *skb;
int err;
[IPV6] address: Convert address lookup to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:10:50 +00:00
err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFA_MAX, ifa_ipv6_policy);
if (err < 0)
goto errout;
addr = extract_addr(tb[IFA_ADDRESS], tb[IFA_LOCAL]);
if (addr == NULL) {
err = -EINVAL;
goto errout;
[IPV6] ADDRCONF: Support get operation of single address Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:12 +00:00
}
[IPV6] address: Convert address lookup to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:10:50 +00:00
ifm = nlmsg_data(nlh);
[IPV6] ADDRCONF: Support get operation of single address Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:12 +00:00
if (ifm->ifa_index)
[NETNS][IPV6] addrconf - make addrconf per namespace All the infrastructure to propagate the network namespace information is ready. Make use of it. There is a special case here between the initial network namespace and the other namespaces: * When ipv6 is initialized at boot time (aka in the init_net), it registers to the notifier callback. So addrconf_notify will be called as many time as there are network devices setup on the system and the function will add ipv6 addresses to the network devices. But the first device which needs to have its ipv6 address setup is the loopback, unfortunatly this is not the case. So the loopback address is setup manually in the ipv6 init function. * With the network namespace, this ordering problem does not appears because notifier is already setup and active, so as soon as we register the loopback the ipv6 address is setup and it will be the first device. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:47:47 +00:00
dev = __dev_get_by_index(net, ifm->ifa_index);
[IPV6] ADDRCONF: Support get operation of single address Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:12 +00:00
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
ifa = ipv6_get_ifaddr(net, addr, dev, 1);
if (!ifa) {
[IPV6] address: Convert address lookup to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:10:50 +00:00
err = -EADDRNOTAVAIL;
goto errout;
}
[IPV6] ADDRCONF: Support get operation of single address Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:12 +00:00
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
skb = nlmsg_new(inet6_ifaddr_msgsize(), GFP_KERNEL);
if (!skb) {
[IPV6] ADDRCONF: Support get operation of single address Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:12 +00:00
err = -ENOBUFS;
[IPV6] address: Convert address lookup to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:10:50 +00:00
goto errout_ifa;
[IPV6] ADDRCONF: Support get operation of single address Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:12 +00:00
}
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
err = inet6_fill_ifaddr(skb, ifa, NETLINK_CB(in_skb).portid,
[IPV6] ADDRCONF: Support get operation of single address Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:12 +00:00
nlh->nlmsg_seq, RTM_NEWADDR, 0);
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
if (err < 0) {
/* -EMSGSIZE implies BUG in inet6_ifaddr_msgsize() */
WARN_ON(err == -EMSGSIZE);
kfree_skb(skb);
goto errout_ifa;
}
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
err = rtnl_unicast(skb, net, NETLINK_CB(in_skb).portid);
[IPV6] address: Convert address lookup to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:10:50 +00:00
errout_ifa:
[IPV6] ADDRCONF: Support get operation of single address Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:12 +00:00
in6_ifa_put(ifa);
[IPV6] address: Convert address lookup to new netlink api Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:10:50 +00:00
errout:
[IPV6] ADDRCONF: Support get operation of single address Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-07-28 09:12:12 +00:00
return err;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static void inet6_ifa_notify(int event, struct inet6_ifaddr *ifa)
{
struct sk_buff *skb;
[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS. Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 12:47:49 +00:00
struct net *net = dev_net(ifa->idev->dev);
[IPv6] address: Convert address notification to use rtnl_notify() Fixes a wrong use of current->pid as netlink pid. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-15 07:35:02 +00:00
int err = -ENOBUFS;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6] address: Convert address dumping to new netlink api Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-18 07:12:35 +00:00
skb = nlmsg_new(inet6_ifaddr_msgsize(), GFP_ATOMIC);
[IPv6] address: Convert address notification to use rtnl_notify() Fixes a wrong use of current->pid as netlink pid. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-15 07:35:02 +00:00
if (skb == NULL)
goto errout;
err = inet6_fill_ifaddr(skb, ifa, 0, 0, event, 0);
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
if (err < 0) {
/* -EMSGSIZE implies BUG in inet6_ifaddr_msgsize() */
WARN_ON(err == -EMSGSIZE);
kfree_skb(skb);
goto errout;
}
netlink: change nlmsg_notify() return value logic This patch changes the return value of nlmsg_notify() as follows: If NETLINK_BROADCAST_ERROR is set by any of the listeners and an error in the delivery happened, return the broadcast error; else if there are no listeners apart from the socket that requested a change with the echo flag, return the result of the unicast notification. Thus, with this patch, the unicast notification is handled in the same way of a broadcast listener that has set the NETLINK_BROADCAST_ERROR socket flag. This patch is useful in case that the caller of nlmsg_notify() wants to know the result of the delivery of a netlink notification (including the broadcast delivery) and take any action in case that the delivery failed. For example, ctnetlink can drop packets if the event delivery failed to provide reliable logging and state-synchronization at the cost of dropping packets. This patch also modifies the rtnetlink code to ignore the return value of rtnl_notify() in all callers. The function rtnl_notify() (before this patch) returned the error of the unicast notification which makes rtnl_set_sk_err() reports errors to all listeners. This is not of any help since the origin of the change (the socket that requested the echoing) notices the ENOBUFS error if the notification fails and should resync itself. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25 07:18:28 +00:00
rtnl_notify(skb, net, 0, RTNLGRP_IPV6_IFADDR, NULL, GFP_ATOMIC);
return;
[IPv6] address: Convert address notification to use rtnl_notify() Fixes a wrong use of current->pid as netlink pid. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-15 07:35:02 +00:00
errout:
if (err < 0)
[NETNS][IPV6] addrconf - make addrconf per namespace All the infrastructure to propagate the network namespace information is ready. Make use of it. There is a special case here between the initial network namespace and the other namespaces: * When ipv6 is initialized at boot time (aka in the init_net), it registers to the notifier callback. So addrconf_notify will be called as many time as there are network devices setup on the system and the function will add ipv6 addresses to the network devices. But the first device which needs to have its ipv6 address setup is the loopback, unfortunatly this is not the case. So the loopback address is setup manually in the ipv6 init function. * With the network namespace, this ordering problem does not appears because notifier is already setup and active, so as soon as we register the loopback the ipv6 address is setup and it will be the first device. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:47:47 +00:00
rtnl_set_sk_err(net, RTNLGRP_IPV6_IFADDR, err);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[NET]: fix up misplaced inlines. Turning up the warnings on gcc makes it emit warnings about the placement of 'inline' in function declarations. Here's everything that was under net/ Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 19:27:49 +00:00
static inline void ipv6_store_devconf(struct ipv6_devconf *cnf,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
__s32 *array, int bytes)
{
[IPv6] iflink: Convert IPv6's RTM_GETLINK to use the new netlink api By replacing the current method of exporting the device configuration which included allocating a temporary buffer, copying ipv6_devconf into it and copying that buffer into the message with a method that uses nla_reserve() allowing to copy the device configuration directly into the skb data buffer, a GFP_ATOMIC allocation could be removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 03:53:58 +00:00
BUG_ON(bytes < (DEVCONF_MAX * 4));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
memset(array, 0, bytes);
array[DEVCONF_FORWARDING] = cnf->forwarding;
array[DEVCONF_HOPLIMIT] = cnf->hop_limit;
array[DEVCONF_MTU6] = cnf->mtu6;
array[DEVCONF_ACCEPT_RA] = cnf->accept_ra;
array[DEVCONF_ACCEPT_REDIRECTS] = cnf->accept_redirects;
array[DEVCONF_AUTOCONF] = cnf->autoconf;
array[DEVCONF_DAD_TRANSMITS] = cnf->dad_transmits;
array[DEVCONF_RTR_SOLICITS] = cnf->rtr_solicits;
ipv6: Expose IFLA_PROTINFO timer values in msecs instead of jiffies IFLA_PROTINFO exposes timer related per device settings in jiffies. Change it to expose these values in msecs like the sysctl interface does. I did not find any users of IFLA_PROTINFO which rely on any of these values and even if there are, they are likely already broken because there is no way for them to reliably convert such a value to another time format. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 01:44:24 +00:00
array[DEVCONF_RTR_SOLICIT_INTERVAL] =
jiffies_to_msecs(cnf->rtr_solicit_interval);
array[DEVCONF_RTR_SOLICIT_DELAY] =
jiffies_to_msecs(cnf->rtr_solicit_delay);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
array[DEVCONF_FORCE_MLD_VERSION] = cnf->force_mld_version;
#ifdef CONFIG_IPV6_PRIVACY
array[DEVCONF_USE_TEMPADDR] = cnf->use_tempaddr;
array[DEVCONF_TEMP_VALID_LFT] = cnf->temp_valid_lft;
array[DEVCONF_TEMP_PREFERED_LFT] = cnf->temp_prefered_lft;
array[DEVCONF_REGEN_MAX_RETRY] = cnf->regen_max_retry;
array[DEVCONF_MAX_DESYNC_FACTOR] = cnf->max_desync_factor;
#endif
array[DEVCONF_MAX_ADDRESSES] = cnf->max_addresses;
[IPV6]: ROUTE: Add accept_ra_defrtr sysctl. This controls whether we accept default router information in RAs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:55:08 +00:00
array[DEVCONF_ACCEPT_RA_DEFRTR] = cnf->accept_ra_defrtr;
[IPV6]: ADDRCONF: Add accept_ra_pinfo sysctl. This controls whether we accept Prefix Information in RAs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:55:26 +00:00
array[DEVCONF_ACCEPT_RA_PINFO] = cnf->accept_ra_pinfo;
[IPV6]: ROUTE: Add accept_ra_rtr_pref sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:05:30 +00:00
#ifdef CONFIG_IPV6_ROUTER_PREF
array[DEVCONF_ACCEPT_RA_RTR_PREF] = cnf->accept_ra_rtr_pref;
ipv6: Expose IFLA_PROTINFO timer values in msecs instead of jiffies IFLA_PROTINFO exposes timer related per device settings in jiffies. Change it to expose these values in msecs like the sysctl interface does. I did not find any users of IFLA_PROTINFO which rely on any of these values and even if there are, they are likely already broken because there is no way for them to reliably convert such a value to another time format. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 01:44:24 +00:00
array[DEVCONF_RTR_PROBE_INTERVAL] =
jiffies_to_msecs(cnf->rtr_probe_interval);
[IPV6]: Fix up some CONFIG typos Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-30 22:30:10 +00:00
#ifdef CONFIG_IPV6_ROUTE_INFO
[IPV6]: ROUTE: Add accept_ra_rt_info_max_plen sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:07:03 +00:00
array[DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN] = cnf->accept_ra_rt_info_max_plen;
#endif
[IPV6]: ROUTE: Add accept_ra_rtr_pref sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:05:30 +00:00
#endif
[IPV6] NDISC: Add proxy_ndp sysctl. We do not always need proxy NDP functionality even we enable forwarding. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:43:49 +00:00
array[DEVCONF_PROXY_NDP] = cnf->proxy_ndp;
[IPV6]: Disallow RH0 by default. A security issue is emerging. Disallow Routing Header Type 0 by default as we have been doing for IPv4. Note: We allow RH2 by default because it is harmless. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-24 21:58:30 +00:00
array[DEVCONF_ACCEPT_SOURCE_ROUTE] = cnf->accept_source_route;
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
#ifdef CONFIG_IPV6_OPTIMISTIC_DAD
array[DEVCONF_OPTIMISTIC_DAD] = cnf->optimistic_dad;
#endif
[IPV6] MROUTE: Support multicast forwarding. Based on ancient patch by Mickael Hoerdt <hoerdt@clarinet.u-strasbg.fr>, which is available at <http://www-r2.u-strasbg.fr/~hoerdt/dev/linux_ipv6_mforwarding/patch-linux-ipv6-mforwarding-0.1a>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-03 00:22:53 +00:00
#ifdef CONFIG_IPV6_MROUTE
array[DEVCONF_MC_FORWARDING] = cnf->mc_forwarding;
#endif
ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:17:11 +00:00
array[DEVCONF_DISABLE_IPV6] = cnf->disable_ipv6;
ipv6 addrconf: add accept_dad sysctl to control DAD operation. - If 0, disable DAD. - If 1, perform DAD (default). - If >1, perform DAD and disable IPv6 operation if DAD for MAC-based link-local address has been failed (RFC4862 5.4.5). We do not follow RFC4862 by default. Refer to the netdev thread entitled "Linux IPv6 DAD not full conform to RFC 4862 ?" http://www.spinics.net/lists/netdev/msg52027.html Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:18:38 +00:00
array[DEVCONF_ACCEPT_DAD] = cnf->accept_dad;
ipv6: fix devconf after adding force_tllao option Signed-off-by: Cosmin Ratiu <cratiu@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-09 03:11:14 +00:00
array[DEVCONF_FORCE_TLLAO] = cnf->force_tllao;
ipv6: add knob to send unsolicited ND on link-layer address change This patch introduces a new knob ndisc_notify. If enabled, the kernel will transmit an unsolicited neighbour advertisement on link-layer address change to update the neighbour tables of the corresponding hosts more quickly. This is the equivalent to arp_notify in ipv4 world. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-06 16:46:20 +00:00
array[DEVCONF_NDISC_NOTIFY] = cnf->ndisc_notify;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv6: AF_INET6 link address family IPv6 already exposes some address family data via netlink in the IFLA_PROTINFO attribute if RTM_GETLINK request is sent with the address family set to AF_INET6. We take over this format and reuse all the code. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 04:33:57 +00:00
static inline size_t inet6_ifla6_size(void)
{
return nla_total_size(4) /* IFLA_INET6_FLAGS */
+ nla_total_size(sizeof(struct ifla_cacheinfo))
+ nla_total_size(DEVCONF_MAX * 4) /* IFLA_INET6_CONF */
+ nla_total_size(IPSTATS_MIB_MAX * 8) /* IFLA_INET6_STATS */
+ nla_total_size(ICMP6_MIB_MAX * 8); /* IFLA_INET6_ICMP6STATS */
}
[NETLINK]: Do precise netlink message allocations where possible Account for the netlink message header size directly in nlmsg_new() instead of relying on the caller calculate it correctly. Replaces error handling of message construction functions when constructing notifications with bug traps since a failure implies a bug in calculating the size of the skb. Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-10 22:10:15 +00:00
static inline size_t inet6_if_nlmsg_size(void)
{
return NLMSG_ALIGN(sizeof(struct ifinfomsg))
+ nla_total_size(IFNAMSIZ) /* IFLA_IFNAME */
+ nla_total_size(MAX_ADDR_LEN) /* IFLA_ADDRESS */
+ nla_total_size(4) /* IFLA_MTU */
+ nla_total_size(4) /* IFLA_LINK */
ipv6: AF_INET6 link address family IPv6 already exposes some address family data via netlink in the IFLA_PROTINFO attribute if RTM_GETLINK request is sent with the address family set to AF_INET6. We take over this format and reuse all the code. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 04:33:57 +00:00
+ nla_total_size(inet6_ifla6_size()); /* IFLA_PROTINFO */
[NETLINK]: Do precise netlink message allocations where possible Account for the netlink message header size directly in nlmsg_new() instead of relying on the caller calculate it correctly. Replaces error handling of message construction functions when constructing notifications with bug traps since a failure implies a bug in calculating the size of the skb. Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-10 22:10:15 +00:00
}
[IPV6]: Sum real space for RTAs. This patch fixes RTNLGRP_IPV6_IFINFO netlink notifications. Issue pointed out by Patrick McHardy <kaber@trash.net>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18 05:48:48 +00:00
ipv6: reduce per device ICMP mib sizes ipv6 has per device ICMP SNMP counters, taking too much space because they use percpu storage. needed size per device is : (512+4)*sizeof(long)*number_of_possible_cpus*2 On a 32bit kernel, 16 possible cpus, this wastes more than 64kbytes of memory per ipv6 enabled network device, taken in vmalloc pool. Since ICMP messages are rare, just use shared counters (atomic_long_t) Per network space ICMP counters are still using percpu memory, we might also convert them to shared counters in a future patch. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 01:14:23 +00:00
static inline void __snmp6_fill_statsdev(u64 *stats, atomic_long_t *mib,
percpu: add __percpu sparse annotations to net Add __percpu sparse annotations to net. These annotations are to make sparse consider percpu variables to be in a different address space and warn if accessed without going through percpu accessors. This patch doesn't affect normal builds. The macro and type tricks around snmp stats make things a bit interesting. DEFINE/DECLARE_SNMP_STAT() macros mark the target field as __percpu and SNMP_UPD_PO_STATS() macro is updated accordingly. All snmp_mib_*() users which used to cast the argument to (void **) are updated to cast it to (void __percpu **). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16 15:20:26 +00:00
int items, int bytes)
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
{
int i;
int pad = bytes - sizeof(u64) * items;
BUG_ON(pad < 0);
/* Use put_unaligned() because stats may not be aligned for u64. */
put_unaligned(items, &stats[0]);
for (i = 1; i < items; i++)
ipv6: reduce per device ICMP mib sizes ipv6 has per device ICMP SNMP counters, taking too much space because they use percpu storage. needed size per device is : (512+4)*sizeof(long)*number_of_possible_cpus*2 On a 32bit kernel, 16 possible cpus, this wastes more than 64kbytes of memory per ipv6 enabled network device, taken in vmalloc pool. Since ICMP messages are rare, just use shared counters (atomic_long_t) Per network space ICMP counters are still using percpu memory, we might also convert them to shared counters in a future patch. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 01:14:23 +00:00
put_unaligned(atomic_long_read(&mib[i]), &stats[i]);
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
memset(&stats[items], 0, pad);
}
snmp: 64bit ipstats_mib for all arches /proc/net/snmp and /proc/net/netstat expose SNMP counters. Width of these counters is either 32 or 64 bits, depending on the size of "unsigned long" in kernel. This means user program parsing these files must already be prepared to deal with 64bit values, regardless of user program being 32 or 64 bit. This patch introduces 64bit snmp values for IPSTAT mib, where some counters can wrap pretty fast if they are 32bit wide. # netstat -s|egrep "InOctets|OutOctets" InOctets: 244068329096 OutOctets: 244069348848 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-30 20:31:19 +00:00
static inline void __snmp6_fill_stats64(u64 *stats, void __percpu **mib,
int items, int bytes, size_t syncpoff)
{
int i;
int pad = bytes - sizeof(u64) * items;
BUG_ON(pad < 0);
/* Use put_unaligned() because stats may not be aligned for u64. */
put_unaligned(items, &stats[0]);
for (i = 1; i < items; i++)
put_unaligned(snmp_fold_field64(mib, i, syncpoff), &stats[i]);
memset(&stats[items], 0, pad);
}
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
static void snmp6_fill_stats(u64 *stats, struct inet6_dev *idev, int attrtype,
int bytes)
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
switch (attrtype) {
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
case IFLA_INET6_STATS:
snmp: 64bit ipstats_mib for all arches /proc/net/snmp and /proc/net/netstat expose SNMP counters. Width of these counters is either 32 or 64 bits, depending on the size of "unsigned long" in kernel. This means user program parsing these files must already be prepared to deal with 64bit values, regardless of user program being 32 or 64 bit. This patch introduces 64bit snmp values for IPSTAT mib, where some counters can wrap pretty fast if they are 32bit wide. # netstat -s|egrep "InOctets|OutOctets" InOctets: 244068329096 OutOctets: 244069348848 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-30 20:31:19 +00:00
__snmp6_fill_stats64(stats, (void __percpu **)idev->stats.ipv6,
IPSTATS_MIB_MAX, bytes, offsetof(struct ipstats_mib, syncp));
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
break;
case IFLA_INET6_ICMP6STATS:
ipv6: reduce per device ICMP mib sizes ipv6 has per device ICMP SNMP counters, taking too much space because they use percpu storage. needed size per device is : (512+4)*sizeof(long)*number_of_possible_cpus*2 On a 32bit kernel, 16 possible cpus, this wastes more than 64kbytes of memory per ipv6 enabled network device, taken in vmalloc pool. Since ICMP messages are rare, just use shared counters (atomic_long_t) Per network space ICMP counters are still using percpu memory, we might also convert them to shared counters in a future patch. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 01:14:23 +00:00
__snmp6_fill_statsdev(stats, idev->stats.icmpv6dev->mibs, ICMP6_MIB_MAX, bytes);
[IPV6]: Consolidate common SNMP code This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 04:54:09 +00:00
break;
}
}
ipv6: AF_INET6 link address family IPv6 already exposes some address family data via netlink in the IFLA_PROTINFO attribute if RTM_GETLINK request is sent with the address family set to AF_INET6. We take over this format and reuse all the code. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 04:33:57 +00:00
static int inet6_fill_ifla6_attrs(struct sk_buff *skb, struct inet6_dev *idev)
{
struct nlattr *nla;
struct ifla_cacheinfo ci;
ipv6: Stop using NLA_PUT*(). These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02 00:27:33 +00:00
if (nla_put_u32(skb, IFLA_INET6_FLAGS, idev->if_flags))
goto nla_put_failure;
ipv6: AF_INET6 link address family IPv6 already exposes some address family data via netlink in the IFLA_PROTINFO attribute if RTM_GETLINK request is sent with the address family set to AF_INET6. We take over this format and reuse all the code. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 04:33:57 +00:00
ci.max_reasm_len = IPV6_MAXPLEN;
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bonding/bond_main.c net/core/net-sysfs.c net/ipv6/addrconf.c
2010-11-19 21:13:47 +00:00
ci.tstamp = cstamp_delta(idev->tstamp);
ci.reachable_time = jiffies_to_msecs(idev->nd_parms->reachable_time);
ci.retrans_time = jiffies_to_msecs(idev->nd_parms->retrans_time);
ipv6: Stop using NLA_PUT*(). These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02 00:27:33 +00:00
if (nla_put(skb, IFLA_INET6_CACHEINFO, sizeof(ci), &ci))
goto nla_put_failure;
ipv6: AF_INET6 link address family IPv6 already exposes some address family data via netlink in the IFLA_PROTINFO attribute if RTM_GETLINK request is sent with the address family set to AF_INET6. We take over this format and reuse all the code. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 04:33:57 +00:00
nla = nla_reserve(skb, IFLA_INET6_CONF, DEVCONF_MAX * sizeof(s32));
if (nla == NULL)
goto nla_put_failure;
ipv6_store_devconf(&idev->cnf, nla_data(nla), nla_len(nla));
/* XXX - MC not implemented */
nla = nla_reserve(skb, IFLA_INET6_STATS, IPSTATS_MIB_MAX * sizeof(u64));
if (nla == NULL)
goto nla_put_failure;
snmp6_fill_stats(nla_data(nla), idev, IFLA_INET6_STATS, nla_len(nla));
nla = nla_reserve(skb, IFLA_INET6_ICMP6STATS, ICMP6_MIB_MAX * sizeof(u64));
if (nla == NULL)
goto nla_put_failure;
snmp6_fill_stats(nla_data(nla), idev, IFLA_INET6_ICMP6STATS, nla_len(nla));
return 0;
nla_put_failure:
return -EMSGSIZE;
}
static size_t inet6_get_link_af_size(const struct net_device *dev)
{
if (!__in6_dev_get(dev))
return 0;
return inet6_ifla6_size();
}
static int inet6_fill_link_af(struct sk_buff *skb, const struct net_device *dev)
{
struct inet6_dev *idev = __in6_dev_get(dev);
if (!idev)
return -ENODATA;
if (inet6_fill_ifla6_attrs(skb, idev) < 0)
return -EMSGSIZE;
return 0;
}
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
static int inet6_fill_ifinfo(struct sk_buff *skb, struct inet6_dev *idev,
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
u32 portid, u32 seq, int event, unsigned int flags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[IPv6] iflink: Convert IPv6's RTM_GETLINK to use the new netlink api By replacing the current method of exporting the device configuration which included allocating a temporary buffer, copying ipv6_devconf into it and copying that buffer into the message with a method that uses nla_reserve() allowing to copy the device configuration directly into the skb data buffer, a GFP_ATOMIC allocation could be removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 03:53:58 +00:00
struct net_device *dev = idev->dev;
struct ifinfomsg *hdr;
struct nlmsghdr *nlh;
void *protoinfo;
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
nlh = nlmsg_put(skb, portid, seq, event, sizeof(*hdr), flags);
[IPv6] iflink: Convert IPv6's RTM_GETLINK to use the new netlink api By replacing the current method of exporting the device configuration which included allocating a temporary buffer, copying ipv6_devconf into it and copying that buffer into the message with a method that uses nla_reserve() allowing to copy the device configuration directly into the skb data buffer, a GFP_ATOMIC allocation could be removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 03:53:58 +00:00
if (nlh == NULL)
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
return -EMSGSIZE;
[IPv6] iflink: Convert IPv6's RTM_GETLINK to use the new netlink api By replacing the current method of exporting the device configuration which included allocating a temporary buffer, copying ipv6_devconf into it and copying that buffer into the message with a method that uses nla_reserve() allowing to copy the device configuration directly into the skb data buffer, a GFP_ATOMIC allocation could be removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 03:53:58 +00:00
hdr = nlmsg_data(nlh);
hdr->ifi_family = AF_INET6;
hdr->__ifi_pad = 0;
hdr->ifi_type = dev->type;
hdr->ifi_index = dev->ifindex;
hdr->ifi_flags = dev_get_flags(dev);
hdr->ifi_change = 0;
ipv6: Stop using NLA_PUT*(). These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02 00:27:33 +00:00
if (nla_put_string(skb, IFLA_IFNAME, dev->name) ||
(dev->addr_len &&
nla_put(skb, IFLA_ADDRESS, dev->addr_len, dev->dev_addr)) ||
nla_put_u32(skb, IFLA_MTU, dev->mtu) ||
(dev->ifindex != dev->iflink &&
nla_put_u32(skb, IFLA_LINK, dev->iflink)))
goto nla_put_failure;
[IPv6] iflink: Convert IPv6's RTM_GETLINK to use the new netlink api By replacing the current method of exporting the device configuration which included allocating a temporary buffer, copying ipv6_devconf into it and copying that buffer into the message with a method that uses nla_reserve() allowing to copy the device configuration directly into the skb data buffer, a GFP_ATOMIC allocation could be removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 03:53:58 +00:00
protoinfo = nla_nest_start(skb, IFLA_PROTINFO);
if (protoinfo == NULL)
goto nla_put_failure;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6: AF_INET6 link address family IPv6 already exposes some address family data via netlink in the IFLA_PROTINFO attribute if RTM_GETLINK request is sent with the address family set to AF_INET6. We take over this format and reuse all the code. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 04:33:57 +00:00
if (inet6_fill_ifla6_attrs(skb, idev) < 0)
[IPV6] SNMP: Netlink interface. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 22:56:20 +00:00
goto nla_put_failure;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPv6] iflink: Convert IPv6's RTM_GETLINK to use the new netlink api By replacing the current method of exporting the device configuration which included allocating a temporary buffer, copying ipv6_devconf into it and copying that buffer into the message with a method that uses nla_reserve() allowing to copy the device configuration directly into the skb data buffer, a GFP_ATOMIC allocation could be removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 03:53:58 +00:00
nla_nest_end(skb, protoinfo);
return nlmsg_end(skb, nlh);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPv6] iflink: Convert IPv6's RTM_GETLINK to use the new netlink api By replacing the current method of exporting the device configuration which included allocating a temporary buffer, copying ipv6_devconf into it and copying that buffer into the message with a method that uses nla_reserve() allowing to copy the device configuration directly into the skb data buffer, a GFP_ATOMIC allocation could be removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 03:53:58 +00:00
nla_put_failure:
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
nlmsg_cancel(skb, nlh);
return -EMSGSIZE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static int inet6_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb)
{
[NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS. Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 17:26:21 +00:00
struct net *net = sock_net(skb->sk);
ipv6: speedup inet6_dump_ifinfo() When handling large number of netdevice, inet6_dump_ifinfo() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the 256 sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-09 12:11:28 +00:00
int h, s_h;
ipv6: Remove unused var in inet6_dump_ifinfo() Reported by Stephen Rothwell: -------------------- Today's linux-next build (x86_64 allmodconfig) produced this warning: net/ipv6/addrconf.c: In function 'inet6_dump_ifinfo': net/ipv6/addrconf.c:3833: warning: unused variable 'err' Introduced by commit 84d2697d9649339215675551eae28ba04068dea1 ("ipv6: speedup inet6_dump_ifinfo()"). -------------------- Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-12 02:53:00 +00:00
int idx = 0, s_idx;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct net_device *dev;
struct inet6_dev *idev;
ipv6: speedup inet6_dump_ifinfo() When handling large number of netdevice, inet6_dump_ifinfo() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the 256 sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-09 12:11:28 +00:00
struct hlist_head *head;
struct hlist_node *node;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6: speedup inet6_dump_ifinfo() When handling large number of netdevice, inet6_dump_ifinfo() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the 256 sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-09 12:11:28 +00:00
s_h = cb->args[0];
s_idx = cb->args[1];
rcu_read_lock();
for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
idx = 0;
head = &net->dev_index_head[h];
hlist_for_each_entry_rcu(dev, node, head, index_hlist) {
if (idx < s_idx)
goto cont;
idev = __in6_dev_get(dev);
if (!idev)
goto cont;
if (inet6_fill_ifinfo(skb, idev,
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
NETLINK_CB(cb->skb).portid,
ipv6: speedup inet6_dump_ifinfo() When handling large number of netdevice, inet6_dump_ifinfo() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the 256 sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-09 12:11:28 +00:00
cb->nlh->nlmsg_seq,
RTM_NEWLINK, NLM_F_MULTI) <= 0)
goto out;
[NET]: Rework dev_base via list_head (v3) Cleanup of dev_base list use, with the aim to simplify making device list per-namespace. In almost every occasion, use of dev_base variable and dev->next pointer could be easily replaced by for_each_netdev loop. A few most complicated places were converted to using first_netdev()/next_netdev(). Signed-off-by: Pavel Emelianov <xemul@openvz.org> Acked-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03 22:13:45 +00:00
cont:
ipv6: speedup inet6_dump_ifinfo() When handling large number of netdevice, inet6_dump_ifinfo() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the 256 sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-09 12:11:28 +00:00
idx++;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ipv6: speedup inet6_dump_ifinfo() When handling large number of netdevice, inet6_dump_ifinfo() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the 256 sub lists of the dev_index hash table, and RCU lookups. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-09 12:11:28 +00:00
out:
rcu_read_unlock();
cb->args[1] = idx;
cb->args[0] = h;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return skb->len;
}
void inet6_ifinfo_notify(int event, struct inet6_dev *idev)
{
struct sk_buff *skb;
[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS. Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 12:47:49 +00:00
struct net *net = dev_net(idev->dev);
[IPv6] link: Convert link notifications to use rtnl_notify() Fixes a wrong use of current->pid as netlink pid. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-15 07:35:47 +00:00
int err = -ENOBUFS;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
[NETLINK]: Do precise netlink message allocations where possible Account for the netlink message header size directly in nlmsg_new() instead of relying on the caller calculate it correctly. Replaces error handling of message construction functions when constructing notifications with bug traps since a failure implies a bug in calculating the size of the skb. Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-10 22:10:15 +00:00
skb = nlmsg_new(inet6_if_nlmsg_size(), GFP_ATOMIC);
[IPv6] link: Convert link notifications to use rtnl_notify() Fixes a wrong use of current->pid as netlink pid. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-15 07:35:47 +00:00
if (skb == NULL)
goto errout;
err = inet6_fill_ifinfo(skb, idev, 0, 0, event, 0);
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
if (err < 0) {
/* -EMSGSIZE implies BUG in inet6_if_nlmsg_size() */
WARN_ON(err == -EMSGSIZE);
kfree_skb(skb);
goto errout;
}
ipv6: fix nl group when advertising a new link New idev are advertised with NL group RTNLGRP_IPV6_IFADDR, but should use RTNLGRP_IPV6_IFINFO. Bug was introduced by commit 8d7a76c9. Signed-off-by: Wang Xuefu <xuefu.wang@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-07 23:38:31 +00:00
rtnl_notify(skb, net, 0, RTNLGRP_IPV6_IFINFO, NULL, GFP_ATOMIC);
netlink: change nlmsg_notify() return value logic This patch changes the return value of nlmsg_notify() as follows: If NETLINK_BROADCAST_ERROR is set by any of the listeners and an error in the delivery happened, return the broadcast error; else if there are no listeners apart from the socket that requested a change with the echo flag, return the result of the unicast notification. Thus, with this patch, the unicast notification is handled in the same way of a broadcast listener that has set the NETLINK_BROADCAST_ERROR socket flag. This patch is useful in case that the caller of nlmsg_notify() wants to know the result of the delivery of a netlink notification (including the broadcast delivery) and take any action in case that the delivery failed. For example, ctnetlink can drop packets if the event delivery failed to provide reliable logging and state-synchronization at the cost of dropping packets. This patch also modifies the rtnetlink code to ignore the return value of rtnl_notify() in all callers. The function rtnl_notify() (before this patch) returned the error of the unicast notification which makes rtnl_set_sk_err() reports errors to all listeners. This is not of any help since the origin of the change (the socket that requested the echoing) notices the ENOBUFS error if the notification fails and should resync itself. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25 07:18:28 +00:00
return;
[IPv6] link: Convert link notifications to use rtnl_notify() Fixes a wrong use of current->pid as netlink pid. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-15 07:35:47 +00:00
errout:
if (err < 0)
ipv6: fix nl group when advertising a new link New idev are advertised with NL group RTNLGRP_IPV6_IFADDR, but should use RTNLGRP_IPV6_IFINFO. Bug was introduced by commit 8d7a76c9. Signed-off-by: Wang Xuefu <xuefu.wang@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-07 23:38:31 +00:00
rtnl_set_sk_err(net, RTNLGRP_IPV6_IFINFO, err);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[NETLINK]: Do precise netlink message allocations where possible Account for the netlink message header size directly in nlmsg_new() instead of relying on the caller calculate it correctly. Replaces error handling of message construction functions when constructing notifications with bug traps since a failure implies a bug in calculating the size of the skb. Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-10 22:10:15 +00:00
static inline size_t inet6_prefix_nlmsg_size(void)
{
return NLMSG_ALIGN(sizeof(struct prefixmsg))
+ nla_total_size(sizeof(struct in6_addr))
+ nla_total_size(sizeof(struct prefix_cacheinfo));
}
[IPV6]: Sum real space for RTAs. This patch fixes RTNLGRP_IPV6_IFINFO netlink notifications. Issue pointed out by Patrick McHardy <kaber@trash.net>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18 05:48:48 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int inet6_fill_prefix(struct sk_buff *skb, struct inet6_dev *idev,
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
struct prefix_info *pinfo, u32 portid, u32 seq,
[IPv6] prefix: Convert RTM_NEWPREFIX notifications to use the new netlink api RTM_GETPREFIX is completely unused and is thus removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 03:54:19 +00:00
int event, unsigned int flags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[IPv6] prefix: Convert RTM_NEWPREFIX notifications to use the new netlink api RTM_GETPREFIX is completely unused and is thus removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 03:54:19 +00:00
struct prefixmsg *pmsg;
struct nlmsghdr *nlh;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct prefix_cacheinfo ci;
netlink: Rename pid to portid to avoid confusion It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 20:12:54 +00:00
nlh = nlmsg_put(skb, portid, seq, event, sizeof(*pmsg), flags);
[IPv6] prefix: Convert RTM_NEWPREFIX notifications to use the new netlink api RTM_GETPREFIX is completely unused and is thus removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 03:54:19 +00:00
if (nlh == NULL)
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
return -EMSGSIZE;
[IPv6] prefix: Convert RTM_NEWPREFIX notifications to use the new netlink api RTM_GETPREFIX is completely unused and is thus removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 03:54:19 +00:00
pmsg = nlmsg_data(nlh);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pmsg->prefix_family = AF_INET6;
[NETLINK]: Missing padding fields in dumped structures Plug holes with padding fields and initialized them to zero. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-28 19:56:45 +00:00
pmsg->prefix_pad1 = 0;
pmsg->prefix_pad2 = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pmsg->prefix_ifindex = idev->dev->ifindex;
pmsg->prefix_len = pinfo->prefix_len;
pmsg->prefix_type = pinfo->type;
[NETLINK]: Missing padding fields in dumped structures Plug holes with padding fields and initialized them to zero. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-28 19:56:45 +00:00
pmsg->prefix_pad3 = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pmsg->prefix_flags = 0;
if (pinfo->onlink)
pmsg->prefix_flags |= IF_PREFIX_ONLINK;
if (pinfo->autoconf)
pmsg->prefix_flags |= IF_PREFIX_AUTOCONF;
ipv6: Stop using NLA_PUT*(). These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02 00:27:33 +00:00
if (nla_put(skb, PREFIX_ADDRESS, sizeof(pinfo->prefix), &pinfo->prefix))
goto nla_put_failure;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ci.preferred_time = ntohl(pinfo->prefered);
ci.valid_time = ntohl(pinfo->valid);
ipv6: Stop using NLA_PUT*(). These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02 00:27:33 +00:00
if (nla_put(skb, PREFIX_CACHEINFO, sizeof(ci), &ci))
goto nla_put_failure;
[IPv6] prefix: Convert RTM_NEWPREFIX notifications to use the new netlink api RTM_GETPREFIX is completely unused and is thus removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 03:54:19 +00:00
return nlmsg_end(skb, nlh);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPv6] prefix: Convert RTM_NEWPREFIX notifications to use the new netlink api RTM_GETPREFIX is completely unused and is thus removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 03:54:19 +00:00
nla_put_failure:
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
nlmsg_cancel(skb, nlh);
return -EMSGSIZE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
static void inet6_prefix_notify(int event, struct inet6_dev *idev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct prefix_info *pinfo)
{
struct sk_buff *skb;
[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS. Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 12:47:49 +00:00
struct net *net = dev_net(idev->dev);
[IPv6] prefix: Convert prefix notifications to use rtnl_notify() Fixes a wrong use of current->pid as netlink pid. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-15 07:36:07 +00:00
int err = -ENOBUFS;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[NETLINK]: Do precise netlink message allocations where possible Account for the netlink message header size directly in nlmsg_new() instead of relying on the caller calculate it correctly. Replaces error handling of message construction functions when constructing notifications with bug traps since a failure implies a bug in calculating the size of the skb. Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-10 22:10:15 +00:00
skb = nlmsg_new(inet6_prefix_nlmsg_size(), GFP_ATOMIC);
[IPv6] prefix: Convert prefix notifications to use rtnl_notify() Fixes a wrong use of current->pid as netlink pid. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-15 07:36:07 +00:00
if (skb == NULL)
goto errout;
err = inet6_fill_prefix(skb, idev, pinfo, 0, 0, event, 0);
[NETLINK]: Don't BUG on undersized allocations Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-01 07:16:40 +00:00
if (err < 0) {
/* -EMSGSIZE implies BUG in inet6_prefix_nlmsg_size() */
WARN_ON(err == -EMSGSIZE);
kfree_skb(skb);
goto errout;
}
netlink: change nlmsg_notify() return value logic This patch changes the return value of nlmsg_notify() as follows: If NETLINK_BROADCAST_ERROR is set by any of the listeners and an error in the delivery happened, return the broadcast error; else if there are no listeners apart from the socket that requested a change with the echo flag, return the result of the unicast notification. Thus, with this patch, the unicast notification is handled in the same way of a broadcast listener that has set the NETLINK_BROADCAST_ERROR socket flag. This patch is useful in case that the caller of nlmsg_notify() wants to know the result of the delivery of a netlink notification (including the broadcast delivery) and take any action in case that the delivery failed. For example, ctnetlink can drop packets if the event delivery failed to provide reliable logging and state-synchronization at the cost of dropping packets. This patch also modifies the rtnetlink code to ignore the return value of rtnl_notify() in all callers. The function rtnl_notify() (before this patch) returned the error of the unicast notification which makes rtnl_set_sk_err() reports errors to all listeners. This is not of any help since the origin of the change (the socket that requested the echoing) notices the ENOBUFS error if the notification fails and should resync itself. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25 07:18:28 +00:00
rtnl_notify(skb, net, 0, RTNLGRP_IPV6_PREFIX, NULL, GFP_ATOMIC);
return;
[IPv6] prefix: Convert prefix notifications to use rtnl_notify() Fixes a wrong use of current->pid as netlink pid. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-15 07:36:07 +00:00
errout:
if (err < 0)
[NETNS][IPV6] addrconf - make addrconf per namespace All the infrastructure to propagate the network namespace information is ready. Make use of it. There is a special case here between the initial network namespace and the other namespaces: * When ipv6 is initialized at boot time (aka in the init_net), it registers to the notifier callback. So addrconf_notify will be called as many time as there are network devices setup on the system and the function will add ipv6 addresses to the network devices. But the first device which needs to have its ipv6 address setup is the loopback, unfortunatly this is not the case. So the loopback address is setup manually in the ipv6 init function. * With the network namespace, this ordering problem does not appears because notifier is already setup and active, so as soon as we register the loopback the ipv6 address is setup and it will be the first device. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:47:47 +00:00
rtnl_set_sk_err(net, RTNLGRP_IPV6_PREFIX, err);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static void __ipv6_ifa_notify(int event, struct inet6_ifaddr *ifp)
{
inet6_ifa_notify(event ? : RTM_NEWADDR, ifp);
switch (event) {
case RTM_NEWADDR:
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
/*
* If the address was optimistic
* we inserted the route at the start of
* our DAD process, so we don't need
* to do it again
*/
if (!(ifp->rt->rt6i_node))
ip6_ins_rt(ifp->rt);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (ifp->idev->cnf.forwarding)
addrconf_join_anycast(ifp);
break;
case RTM_DELADDR:
if (ifp->idev->cnf.forwarding)
addrconf_leave_anycast(ifp);
addrconf_leave_solict(ifp->idev, &ifp->addr);
net-next: remove useless union keyword remove useless union keyword in rtable, rt6_info and dn_route. Since there is only one member in a union, the union keyword isn't useful. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 06:31:35 +00:00
dst_hold(&ifp->rt->dst);
IPv6: keep route for tentative address Recent changes preserve IPv6 address when link goes down (good). But would cause address to point to dead dst entry (bad). The simplest fix is to just not delete route if address is being held for later use. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12 05:41:31 +00:00
ipv6: Revert 'administrative down' address handling changes. This reverts the following set of commits: d1ed113f1669390da9898da3beddcc058d938587 ("ipv6: remove duplicate neigh_ifdown") 29ba5fed1bbd09c2cba890798c8f9eaab251401d ("ipv6: don't flush routes when setting loopback down") 9d82ca98f71fd686ef2f3017c5e3e6a4871b6e46 ("ipv6: fix missing in6_ifa_put in addrconf") 2de795707294972f6c34bae9de713e502c431296 ("ipv6: addrconf: don't remove address state on ifdown if the address is being kept") 8595805aafc8b077e01804c9a3668e9aa3510e89 ("IPv6: only notify protocols if address is compeletely gone") 27bdb2abcc5edb3526e25407b74bf17d1872c329 ("IPv6: keep tentative addresses in hash table") 93fa159abe50d3c55c7f83622d3f5c09b6e06f4b ("IPv6: keep route for tentative address") 8f37ada5b5f6bfb4d251a7f510f249cb855b77b3 ("IPv6: fix race between cleanup and add/delete address") 84e8b803f1e16f3a2b8b80f80a63fa2f2f8a9be6 ("IPv6: addrconf notify when address is unavailable") dc2b99f71ef477a31020511876ab4403fb7c4420 ("IPv6: keep permanent addresses on admin down") because the core semantic change to ipv6 address handling on ifdown has broken some things, in particular "disable_ipv6" sysctl handling. Stephen has made several attempts to get things back in working order, but nothing has restored disable_ipv6 fully yet. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24 07:27:15 +00:00
if (ip6_del_rt(ifp->rt))
net-next: remove useless union keyword remove useless union keyword in rtable, rt6_info and dn_route. Since there is only one member in a union, the union keyword isn't useful. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 06:31:35 +00:00
dst_free(&ifp->rt->dst);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
}
}
static void ipv6_ifa_notify(int event, struct inet6_ifaddr *ifp)
{
[IPV6] ADDRCONF: Convert addrconf_lock to RCU. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:44:24 +00:00
rcu_read_lock_bh();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (likely(ifp->idev->dead == 0))
__ipv6_ifa_notify(event, ifp);
[IPV6] ADDRCONF: Convert addrconf_lock to RCU. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:44:24 +00:00
rcu_read_unlock_bh();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#ifdef CONFIG_SYSCTL
static
sysctl: remove "struct file *" argument of ->proc_handler It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 22:57:19 +00:00
int addrconf_sysctl_forward(ctl_table *ctl, int write,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int *valp = ctl->data;
int val = *valp;
net: Fix sysctl restarts... Yuck. It turns out that when we restart sysctls we were restarting with the values already changed. Which unfortunately meant that the second time through we thought there was no change and skipped all kinds of work, despite the fact that there was indeed a change. I have fixed this the simplest way possible by restoring the changed values when we restart the sysctl write. One of my coworkers spotted this bug when after disabling forwarding on an interface pings were still forwarded. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19 13:22:59 +00:00
loff_t pos = *ppos;
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
ctl_table lctl;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int ret;
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
/*
* ctl->data points to idev->cnf.forwarding, we should
* not modify it until we get the rtnl lock.
*/
lctl = *ctl;
lctl.data = &val;
ret = proc_dointvec(&lctl, write, buffer, lenp, ppos);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6]: Eliminate difference in actions of sysctl and proc handler for conf.all.forwarding The only difference in this case is that updating all.forwarding causes the update in default.forwarding when done via proc, but not via the system call. Besides, this consolidates a good portion of code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-05 09:50:24 +00:00
if (write)
ipv6: Fix sysctl unregistration deadlock Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 06:55:31 +00:00
ret = addrconf_fixup_forwarding(ctl, valp, val);
net: Fix sysctl restarts... Yuck. It turns out that when we restart sysctls we were restarting with the values already changed. Which unfortunately meant that the second time through we thought there was no change and skipped all kinds of work, despite the fact that there was indeed a change. I have fixed this the simplest way possible by restoring the changed values when we restart the sysctl write. One of my coworkers spotted this bug when after disabling forwarding on an interface pings were still forwarded. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19 13:22:59 +00:00
if (ret)
*ppos = pos;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
static void dev_disable_change(struct inet6_dev *idev)
{
if (!idev || !idev->dev)
return;
if (idev->cnf.disable_ipv6)
addrconf_notify(NULL, NETDEV_DOWN, idev->dev);
else
addrconf_notify(NULL, NETDEV_UP, idev->dev);
}
static void addrconf_disable_change(struct net *net, __s32 newf)
{
struct net_device *dev;
struct inet6_dev *idev;
net: Introduce for_each_netdev_rcu() iterator Adds RCU management to the list of netdevices. Convert some for_each_netdev() users to RCU version, if it can avoid read_lock-ing dev_base_lock Ie: read_lock(&dev_base_loack); for_each_netdev(net, dev) some_action(); read_unlock(&dev_base_lock); becomes : rcu_read_lock(); for_each_netdev_rcu(net, dev) some_action(); rcu_read_unlock(); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 13:43:23 +00:00
rcu_read_lock();
for_each_netdev_rcu(net, dev) {
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
idev = __in6_dev_get(dev);
if (idev) {
int changed = (!idev->cnf.disable_ipv6) ^ (!newf);
idev->cnf.disable_ipv6 = newf;
if (changed)
dev_disable_change(idev);
}
}
net: Introduce for_each_netdev_rcu() iterator Adds RCU management to the list of netdevices. Convert some for_each_netdev() users to RCU version, if it can avoid read_lock-ing dev_base_lock Ie: read_lock(&dev_base_loack); for_each_netdev(net, dev) some_action(); read_unlock(&dev_base_lock); becomes : rcu_read_lock(); for_each_netdev_rcu(net, dev) some_action(); rcu_read_unlock(); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 13:43:23 +00:00
rcu_read_unlock();
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
}
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
static int addrconf_disable_ipv6(struct ctl_table *table, int *p, int newf)
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
{
struct net *net;
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
int old;
if (!rtnl_trylock())
return restart_syscall();
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
net = (struct net *)table->extra2;
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
old = *p;
*p = newf;
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
if (p == &net->ipv6.devconf_dflt->disable_ipv6) {
rtnl_unlock();
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
return 0;
net: Fix sysctl restarts... Yuck. It turns out that when we restart sysctls we were restarting with the values already changed. Which unfortunately meant that the second time through we thought there was no change and skipped all kinds of work, despite the fact that there was indeed a change. I have fixed this the simplest way possible by restoring the changed values when we restart the sysctl write. One of my coworkers spotted this bug when after disabling forwarding on an interface pings were still forwarded. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19 13:22:59 +00:00
}
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
if (p == &net->ipv6.devconf_all->disable_ipv6) {
net->ipv6.devconf_dflt->disable_ipv6 = newf;
addrconf_disable_change(net, newf);
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
} else if ((!newf) ^ (!old))
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
dev_disable_change((struct inet6_dev *)table->extra1);
rtnl_unlock();
return 0;
}
static
sysctl: remove "struct file *" argument of ->proc_handler It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 22:57:19 +00:00
int addrconf_sysctl_disable(ctl_table *ctl, int write,
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int *valp = ctl->data;
int val = *valp;
net: Fix sysctl restarts... Yuck. It turns out that when we restart sysctls we were restarting with the values already changed. Which unfortunately meant that the second time through we thought there was no change and skipped all kinds of work, despite the fact that there was indeed a change. I have fixed this the simplest way possible by restoring the changed values when we restart the sysctl write. One of my coworkers spotted this bug when after disabling forwarding on an interface pings were still forwarded. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19 13:22:59 +00:00
loff_t pos = *ppos;
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
ctl_table lctl;
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
int ret;
net: race condition in ipv6 forwarding and disable_ipv6 parameters There is a race condition in addrconf_sysctl_forward() and addrconf_sysctl_disable(). These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6) and then try to grab the rtnl lock before performing any actions. If that fails they restore the original value and restart the syscall. This creates race conditions if ipv6 code tries to access these parameters, or if multiple instances try to do the same operation. As an example of the former, if __ipv6_ifa_notify() finds a 0 in idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free anycast addresses, ultimately resulting in the net_device not being freed. This patch reads the user parameters into a temporary location and only writes the actual parameters when the rtnl lock is acquired. Tested in 2.6.38.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 10:40:10 +00:00
/*
* ctl->data points to idev->cnf.disable_ipv6, we should
* not modify it until we get the rtnl lock.
*/
lctl = *ctl;
lctl.data = &val;
ret = proc_dointvec(&lctl, write, buffer, lenp, ppos);
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
if (write)
ret = addrconf_disable_ipv6(ctl, valp, val);
net: Fix sysctl restarts... Yuck. It turns out that when we restart sysctls we were restarting with the values already changed. Which unfortunately meant that the second time through we thought there was no change and skipped all kinds of work, despite the fact that there was indeed a change. I have fixed this the simplest way possible by restoring the changed values when we restart the sysctl write. One of my coworkers spotted this bug when after disabling forwarding on an interface pings were still forwarded. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19 13:22:59 +00:00
if (ret)
*ppos = pos;
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
return ret;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static struct addrconf_sysctl_table
{
struct ctl_table_header *sysctl_header;
[IPV6] ADDRCONF: Fix array size for sysctls. We have been using __NET_IPV6_MAX for adjusting the size of array for sysctl table, but it does not work any longer because of the deprecation of NET_IPV6_xxx constants. Let's use DEVCONF_MAX instead. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-24 15:25:11 +00:00
ctl_table addrconf_vars[DEVCONF_MAX+1];
[NET/IPV4/IPV6]: Change some sysctl variables to __read_mostly Change net/core, ipv4 and ipv6 sysctl variables to __read_mostly. Couldn't actually measure any performance increase while testing (.3% I consider noise), but seems like the right thing to do. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:15:41 +00:00
} addrconf_sysctl __read_mostly = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.sysctl_header = NULL,
.addrconf_vars = {
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "forwarding",
.data = &ipv6_devconf.forwarding,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = addrconf_sysctl_forward,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "hop_limit",
.data = &ipv6_devconf.hop_limit,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "mtu",
.data = &ipv6_devconf.mtu6,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "accept_ra",
.data = &ipv6_devconf.accept_ra,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "accept_redirects",
.data = &ipv6_devconf.accept_redirects,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "autoconf",
.data = &ipv6_devconf.autoconf,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "dad_transmits",
.data = &ipv6_devconf.dad_transmits,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "router_solicitations",
.data = &ipv6_devconf.rtr_solicits,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "router_solicitation_interval",
.data = &ipv6_devconf.rtr_solicit_interval,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_jiffies,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "router_solicitation_delay",
.data = &ipv6_devconf.rtr_solicit_delay,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_jiffies,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "force_mld_version",
.data = &ipv6_devconf.force_mld_version,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
#ifdef CONFIG_IPV6_PRIVACY
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "use_tempaddr",
.data = &ipv6_devconf.use_tempaddr,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "temp_valid_lft",
.data = &ipv6_devconf.temp_valid_lft,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "temp_prefered_lft",
.data = &ipv6_devconf.temp_prefered_lft,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "regen_max_retry",
.data = &ipv6_devconf.regen_max_retry,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "max_desync_factor",
.data = &ipv6_devconf.max_desync_factor,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
#endif
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "max_addresses",
.data = &ipv6_devconf.max_addresses,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
[IPV6]: ROUTE: Add accept_ra_defrtr sysctl. This controls whether we accept default router information in RAs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:55:08 +00:00
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "accept_ra_defrtr",
.data = &ipv6_devconf.accept_ra_defrtr,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
[IPV6]: ROUTE: Add accept_ra_defrtr sysctl. This controls whether we accept default router information in RAs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:55:08 +00:00
},
[IPV6]: ADDRCONF: Add accept_ra_pinfo sysctl. This controls whether we accept Prefix Information in RAs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:55:26 +00:00
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "accept_ra_pinfo",
.data = &ipv6_devconf.accept_ra_pinfo,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
[IPV6]: ADDRCONF: Add accept_ra_pinfo sysctl. This controls whether we accept Prefix Information in RAs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 00:55:26 +00:00
},
[IPV6]: ROUTE: Add accept_ra_rtr_pref sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:05:30 +00:00
#ifdef CONFIG_IPV6_ROUTER_PREF
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "accept_ra_rtr_pref",
.data = &ipv6_devconf.accept_ra_rtr_pref,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
[IPV6]: ROUTE: Add accept_ra_rtr_pref sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:05:30 +00:00
},
[IPV6]: ROUTE: Add router_probe_interval sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:05:47 +00:00
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "router_probe_interval",
.data = &ipv6_devconf.rtr_probe_interval,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_jiffies,
[IPV6]: ROUTE: Add router_probe_interval sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:05:47 +00:00
},
[IPV6]: Fix up some CONFIG typos Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-30 22:30:10 +00:00
#ifdef CONFIG_IPV6_ROUTE_INFO
[IPV6]: ROUTE: Add accept_ra_rt_info_max_plen sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:07:03 +00:00
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "accept_ra_rt_info_max_plen",
.data = &ipv6_devconf.accept_ra_rt_info_max_plen,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
[IPV6]: ROUTE: Add accept_ra_rt_info_max_plen sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:07:03 +00:00
},
#endif
[IPV6]: ROUTE: Add accept_ra_rtr_pref sysctl. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 01:05:30 +00:00
#endif
[IPV6] NDISC: Add proxy_ndp sysctl. We do not always need proxy NDP functionality even we enable forwarding. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:43:49 +00:00
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "proxy_ndp",
.data = &ipv6_devconf.proxy_ndp,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
[IPV6] NDISC: Add proxy_ndp sysctl. We do not always need proxy NDP functionality even we enable forwarding. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 21:43:49 +00:00
},
[IPV6]: Disallow RH0 by default. A security issue is emerging. Disallow Routing Header Type 0 by default as we have been doing for IPv4. Note: We allow RH2 by default because it is harmless. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-24 21:58:30 +00:00
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "accept_source_route",
.data = &ipv6_devconf.accept_source_route,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
[IPV6]: Disallow RH0 by default. A security issue is emerging. Disallow Routing Header Type 0 by default as we have been doing for IPv4. Note: We allow RH2 by default because it is harmless. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-24 21:58:30 +00:00
},
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
#ifdef CONFIG_IPV6_OPTIMISTIC_DAD
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "optimistic_dad",
.data = &ipv6_devconf.optimistic_dad,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
},
[IPV6] MROUTE: Support multicast forwarding. Based on ancient patch by Mickael Hoerdt <hoerdt@clarinet.u-strasbg.fr>, which is available at <http://www-r2.u-strasbg.fr/~hoerdt/dev/linux_ipv6_mforwarding/patch-linux-ipv6-mforwarding-0.1a>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-03 00:22:53 +00:00
#endif
#ifdef CONFIG_IPV6_MROUTE
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "mc_forwarding",
.data = &ipv6_devconf.mc_forwarding,
.maxlen = sizeof(int),
.mode = 0444,
.proc_handler = proc_dointvec,
[IPV6] MROUTE: Support multicast forwarding. Based on ancient patch by Mickael Hoerdt <hoerdt@clarinet.u-strasbg.fr>, which is available at <http://www-r2.u-strasbg.fr/~hoerdt/dev/linux_ipv6_mforwarding/patch-linux-ipv6-mforwarding-0.1a>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-03 00:22:53 +00:00
},
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:08:10 +00:00
#endif
ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:17:11 +00:00
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "disable_ipv6",
.data = &ipv6_devconf.disable_ipv6,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = addrconf_sysctl_disable,
ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:17:11 +00:00
},
ipv6 addrconf: add accept_dad sysctl to control DAD operation. - If 0, disable DAD. - If 1, perform DAD (default). - If >1, perform DAD and disable IPv6 operation if DAD for MAC-based link-local address has been failed (RFC4862 5.4.5). We do not follow RFC4862 by default. Refer to the netdev thread entitled "Linux IPv6 DAD not full conform to RFC 4862 ?" http://www.spinics.net/lists/netdev/msg52027.html Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:18:38 +00:00
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
.procname = "accept_dad",
.data = &ipv6_devconf.accept_dad,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
ipv6 addrconf: add accept_dad sysctl to control DAD operation. - If 0, disable DAD. - If 1, perform DAD (default). - If >1, perform DAD and disable IPv6 operation if DAD for MAC-based link-local address has been failed (RFC4862 5.4.5). We do not follow RFC4862 by default. Refer to the netdev thread entitled "Linux IPv6 DAD not full conform to RFC 4862 ?" http://www.spinics.net/lists/netdev/msg52027.html Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-28 05:18:38 +00:00
},
make TLLAO option for NA packets configurable On Friday 02 October 2009 20:53:51 you wrote: > This is good although I would have shortened the name. Ah, I knew I forgot something :) Here is v4. tavi >From 24d96d825b9fa832b22878cc6c990d5711968734 Mon Sep 17 00:00:00 2001 From: Octavian Purdila <opurdila@ixiacom.com> Date: Fri, 2 Oct 2009 00:51:15 +0300 Subject: [PATCH] ipv6: new sysctl for sending TLLAO with unicast NAs Neighbor advertisements responding to unicast neighbor solicitations did not include the target link-layer address option. This patch adds a new sysctl option (disabled by default) which controls whether this option should be sent even with unicast NAs. The need for this arose because certain routers expect the TLLAO in some situations even as a response to unicast NS packets. Moreover, RFC 2461 recommends sending this to avoid a race condition (section 4.4, Target link-layer address) Signed-off-by: Cosmin Ratiu <cratiu@ixiacom.com> Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-02 11:39:15 +00:00
{
.procname = "force_tllao",
.data = &ipv6_devconf.force_tllao,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec
},
ipv6: add knob to send unsolicited ND on link-layer address change This patch introduces a new knob ndisc_notify. If enabled, the kernel will transmit an unsolicited neighbour advertisement on link-layer address change to update the neighbour tables of the corresponding hosts more quickly. This is the equivalent to arp_notify in ipv4 world. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-06 16:46:20 +00:00
{
.procname = "ndisc_notify",
.data = &ipv6_devconf.ndisc_notify,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec
},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
sysctl net: Remove unused binary sysctl code Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-05 21:32:03 +00:00
/* sentinel */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
},
};
[NETNS]: Make the ctl-tables per-namespace This includes passing the net to __addrconf_sysctl_register and saving this on the ctl_table->extra2 to be used in handlers (those, needing it). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:13 +00:00
static int __addrconf_sysctl_register(struct net *net, char *dev_name,
sysctl net: Remove unused binary sysctl code Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-05 21:32:03 +00:00
struct inet6_dev *idev, struct ipv6_devconf *p)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
int i;
struct addrconf_sysctl_table *t;
net ipv6: Convert addrconf to use register_net_sysctl Using an ascii path to register_net_sysctl as opposed to the slightly awkward ctl_path allows for much simpler code. We no longer need to malloc dev_name to keep it alive the length of our sysctl register instead we can use a small temporary buffer on the stack. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 13:41:24 +00:00
char path[sizeof("net/ipv6/conf/") + IFNAMSIZ];
[IPV6]: Use ctl paths to register addrconf sysctls This looks very much like the patch for ipv4's devinet. This is also intended to help us with the net namespaces and saves the ipv6.ko size by ~320 bytes. The difference from the first version is just the patch offsets, that changed due to changes in the patch #2. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-01 13:59:38 +00:00
[IPV6]: Use kmemdup Code diff stats: [acme@newtoy net-2.6.20]$ codiff /tmp/ipv6.ko.before /tmp/ipv6.ko.after /pub/scm/linux/kernel/git/acme/net-2.6.20/net/ipv6/ip6_output.c: ip6_output | -52 ip6_append_data | +2 2 functions changed, 2 bytes added, 52 bytes removed /pub/scm/linux/kernel/git/acme/net-2.6.20/net/ipv6/addrconf.c: addrconf_sysctl_register | -27 1 function changed, 27 bytes removed /pub/scm/linux/kernel/git/acme/net-2.6.20/net/ipv6/tcp_ipv6.c: tcp_v6_syn_recv_sock | -32 tcp_v6_parse_md5_keys | -24 2 functions changed, 56 bytes removed /tmp/ipv6.ko.after: 5 functions changed, 2 bytes added, 135 bytes removed [acme@newtoy net-2.6.20]$ Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-11-17 14:14:37 +00:00
t = kmemdup(&addrconf_sysctl, sizeof(*t), GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (t == NULL)
[IPV6]: Cleanup the addconf_sysctl_register This only includes fixing the space-indented lines and removing one unneeded else after the goto. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-01 13:21:52 +00:00
goto out;
IPv6: addrconf cleanups Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:08:18 +00:00
for (i = 0; t->addrconf_vars[i].data; i++) {
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
t->addrconf_vars[i].data += (char *)p - (char *)&ipv6_devconf;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
t->addrconf_vars[i].extra1 = idev; /* embedded; no ref */
[NETNS]: Make the ctl-tables per-namespace This includes passing the net to __addrconf_sysctl_register and saving this on the ctl_table->extra2 to be used in handlers (those, needing it). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:13 +00:00
t->addrconf_vars[i].extra2 = net;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
net ipv6: Convert addrconf to use register_net_sysctl Using an ascii path to register_net_sysctl as opposed to the slightly awkward ctl_path allows for much simpler code. We no longer need to malloc dev_name to keep it alive the length of our sysctl register instead we can use a small temporary buffer on the stack. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 13:41:24 +00:00
snprintf(path, sizeof(path), "net/ipv6/conf/%s", dev_name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
net ipv6: Convert addrconf to use register_net_sysctl Using an ascii path to register_net_sysctl as opposed to the slightly awkward ctl_path allows for much simpler code. We no longer need to malloc dev_name to keep it alive the length of our sysctl register instead we can use a small temporary buffer on the stack. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 13:41:24 +00:00
t->sysctl_header = register_net_sysctl(net, path, t->addrconf_vars);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (t->sysctl_header == NULL)
net ipv6: Convert addrconf to use register_net_sysctl Using an ascii path to register_net_sysctl as opposed to the slightly awkward ctl_path allows for much simpler code. We no longer need to malloc dev_name to keep it alive the length of our sysctl register instead we can use a small temporary buffer on the stack. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 13:41:24 +00:00
goto free;
[IPV6]: Cleanup the addconf_sysctl_register This only includes fixing the space-indented lines and removing one unneeded else after the goto. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-01 13:21:52 +00:00
p->sysctl = t;
[NETNS]: Make the __addrconf_sysctl_register return an error This error code will be needed to abort the namespace creation if needed. Probably, this is to be checked when a new device is created (currently it is ignored). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:41:45 +00:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[IPV6]: Cleanup the addconf_sysctl_register This only includes fixing the space-indented lines and removing one unneeded else after the goto. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-01 13:21:52 +00:00
free:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kfree(t);
[IPV6]: Cleanup the addconf_sysctl_register This only includes fixing the space-indented lines and removing one unneeded else after the goto. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-01 13:21:52 +00:00
out:
[NETNS]: Make the __addrconf_sysctl_register return an error This error code will be needed to abort the namespace creation if needed. Probably, this is to be checked when a new device is created (currently it is ignored). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:41:45 +00:00
return -ENOBUFS;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[NETNS]: Clean out the ipv6-related sysctls creation/destruction The addrconf sysctls and neigh sysctls are registered and unregistered always in pairs, so they can be joined into one (well, two) functions, that accept the struct inet6_dev and do all the job. This also get rids of unneeded ifdefs inside the code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:41:21 +00:00
static void __addrconf_sysctl_unregister(struct ipv6_devconf *p)
{
struct addrconf_sysctl_table *t;
if (p->sysctl == NULL)
return;
t = p->sysctl;
p->sysctl = NULL;
sysctl: net: call unregister_net_sysctl_table where needed ctl_table_headers registered with register_net_sysctl_table should have been unregistered with the equivalent unregister_net_sysctl_table Signed-off-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-01 01:44:01 +00:00
unregister_net_sysctl_table(t->sysctl_header);
[NETNS]: Clean out the ipv6-related sysctls creation/destruction The addrconf sysctls and neigh sysctls are registered and unregistered always in pairs, so they can be joined into one (well, two) functions, that accept the struct inet6_dev and do all the job. This also get rids of unneeded ifdefs inside the code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:41:21 +00:00
kfree(t);
}
[IPV6]: Unify and cleanup calls to addrconf_sysctl_register Currently this call is (ab)used similar to devinet one - it registers sysctls for devices and for the "default" confs, while the "all" sysctls are registered separately. But unlike its devinet brother, the passed inet6_device is needed. The fix is to make a __addrconf_sysctl_register(), which registers sysctls for all "devices" we need, including "default" and "all" :) The original addrconf_sysctl_register() calls the introduced function, passing the inet6_device, device name and ifindex (to be used as procname and ctl_name) into it. Thanks to Herbert again for pointing out, that we can shrink the argument list to 1 :) Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-01 13:58:37 +00:00
static void addrconf_sysctl_register(struct inet6_dev *idev)
{
net neigh: Decouple per interface neighbour table controls from binary sysctls Stop computing the number of neighbour table settings we have by counting the number of binary sysctls. This behaviour was silly and meant that we could not add another neighbour table setting without also adding another binary sysctl. Don't pass the binary sysctl path for neighour table entries into neigh_sysctl_register. These parameters are no longer used and so are just dead code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-14 03:27:03 +00:00
neigh_sysctl_register(idev->dev, idev->nd_parms, "ipv6",
sysctl net: Remove unused binary sysctl code Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-05 21:32:03 +00:00
&ndisc_ifinfo_sysctl_change);
[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS. Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 12:47:49 +00:00
__addrconf_sysctl_register(dev_net(idev->dev), idev->dev->name,
sysctl net: Remove unused binary sysctl code Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-05 21:32:03 +00:00
idev, &idev->cnf);
[IPV6]: Unify and cleanup calls to addrconf_sysctl_register Currently this call is (ab)used similar to devinet one - it registers sysctls for devices and for the "default" confs, while the "all" sysctls are registered separately. But unlike its devinet brother, the passed inet6_device is needed. The fix is to make a __addrconf_sysctl_register(), which registers sysctls for all "devices" we need, including "default" and "all" :) The original addrconf_sysctl_register() calls the introduced function, passing the inet6_device, device name and ifindex (to be used as procname and ctl_name) into it. Thanks to Herbert again for pointing out, that we can shrink the argument list to 1 :) Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-01 13:58:37 +00:00
}
[NETNS]: Clean out the ipv6-related sysctls creation/destruction The addrconf sysctls and neigh sysctls are registered and unregistered always in pairs, so they can be joined into one (well, two) functions, that accept the struct inet6_dev and do all the job. This also get rids of unneeded ifdefs inside the code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:41:21 +00:00
static void addrconf_sysctl_unregister(struct inet6_dev *idev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[NETNS]: Clean out the ipv6-related sysctls creation/destruction The addrconf sysctls and neigh sysctls are registered and unregistered always in pairs, so they can be joined into one (well, two) functions, that accept the struct inet6_dev and do all the job. This also get rids of unneeded ifdefs inside the code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:41:21 +00:00
__addrconf_sysctl_unregister(&idev->cnf);
neigh_sysctl_unregister(idev->nd_parms);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#endif
net: spread __net_init, __net_exit __net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-17 03:35:32 +00:00
static int __net_init addrconf_init_net(struct net *net)
[NETNS]: Create ipv6 devconf-s for namespaces This is the core. Declare and register the pernet subsys for addrconf. The init callback the will create the devconf-s. The init_net will reuse the existing statically declared confs, so that accessing them from inside the ipv6 code will still work. The register_pernet_subsys() is moved above the ipv6_add_dev() call for loopback, because this function will need the net->devconf_dflt pointer to be already set. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:55 +00:00
{
int err;
struct ipv6_devconf *all, *dflt;
err = -ENOMEM;
all = &ipv6_devconf;
dflt = &ipv6_devconf_dflt;
net: use net_eq to compare nets Generated with the following semantic patch @@ struct net *n1; struct net *n2; @@ - n1 == n2 + net_eq(n1, n2) @@ struct net *n1; struct net *n2; @@ - n1 != n2 + !net_eq(n1, n2) applied over {include,net,drivers/net}. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25 23:14:13 +00:00
if (!net_eq(net, &init_net)) {
[NETNS]: Create ipv6 devconf-s for namespaces This is the core. Declare and register the pernet subsys for addrconf. The init callback the will create the devconf-s. The init_net will reuse the existing statically declared confs, so that accessing them from inside the ipv6 code will still work. The register_pernet_subsys() is moved above the ipv6_add_dev() call for loopback, because this function will need the net->devconf_dflt pointer to be already set. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:55 +00:00
all = kmemdup(all, sizeof(ipv6_devconf), GFP_KERNEL);
if (all == NULL)
goto err_alloc_all;
dflt = kmemdup(dflt, sizeof(ipv6_devconf_dflt), GFP_KERNEL);
if (dflt == NULL)
goto err_alloc_dflt;
IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01 10:07:33 +00:00
} else {
/* these will be inherited by all namespaces */
dflt->autoconf = ipv6_defaults.autoconf;
dflt->disable_ipv6 = ipv6_defaults.disable_ipv6;
[NETNS]: Create ipv6 devconf-s for namespaces This is the core. Declare and register the pernet subsys for addrconf. The init callback the will create the devconf-s. The init_net will reuse the existing statically declared confs, so that accessing them from inside the ipv6 code will still work. The register_pernet_subsys() is moved above the ipv6_add_dev() call for loopback, because this function will need the net->devconf_dflt pointer to be already set. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:55 +00:00
}
net->ipv6.devconf_all = all;
net->ipv6.devconf_dflt = dflt;
#ifdef CONFIG_SYSCTL
sysctl net: Remove unused binary sysctl code Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-05 21:32:03 +00:00
err = __addrconf_sysctl_register(net, "all", NULL, all);
[NETNS]: Create ipv6 devconf-s for namespaces This is the core. Declare and register the pernet subsys for addrconf. The init callback the will create the devconf-s. The init_net will reuse the existing statically declared confs, so that accessing them from inside the ipv6 code will still work. The register_pernet_subsys() is moved above the ipv6_add_dev() call for loopback, because this function will need the net->devconf_dflt pointer to be already set. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:55 +00:00
if (err < 0)
goto err_reg_all;
sysctl net: Remove unused binary sysctl code Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-05 21:32:03 +00:00
err = __addrconf_sysctl_register(net, "default", NULL, dflt);
[NETNS]: Create ipv6 devconf-s for namespaces This is the core. Declare and register the pernet subsys for addrconf. The init callback the will create the devconf-s. The init_net will reuse the existing statically declared confs, so that accessing them from inside the ipv6 code will still work. The register_pernet_subsys() is moved above the ipv6_add_dev() call for loopback, because this function will need the net->devconf_dflt pointer to be already set. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:55 +00:00
if (err < 0)
goto err_reg_dflt;
#endif
return 0;
#ifdef CONFIG_SYSCTL
err_reg_dflt:
__addrconf_sysctl_unregister(all);
err_reg_all:
kfree(dflt);
#endif
err_alloc_dflt:
kfree(all);
err_alloc_all:
return err;
}
net: spread __net_init, __net_exit __net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-17 03:35:32 +00:00
static void __net_exit addrconf_exit_net(struct net *net)
[NETNS]: Create ipv6 devconf-s for namespaces This is the core. Declare and register the pernet subsys for addrconf. The init callback the will create the devconf-s. The init_net will reuse the existing statically declared confs, so that accessing them from inside the ipv6 code will still work. The register_pernet_subsys() is moved above the ipv6_add_dev() call for loopback, because this function will need the net->devconf_dflt pointer to be already set. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:55 +00:00
{
#ifdef CONFIG_SYSCTL
__addrconf_sysctl_unregister(net->ipv6.devconf_dflt);
__addrconf_sysctl_unregister(net->ipv6.devconf_all);
#endif
net: use net_eq to compare nets Generated with the following semantic patch @@ struct net *n1; struct net *n2; @@ - n1 == n2 + net_eq(n1, n2) @@ struct net *n1; struct net *n2; @@ - n1 != n2 + !net_eq(n1, n2) applied over {include,net,drivers/net}. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25 23:14:13 +00:00
if (!net_eq(net, &init_net)) {
[NETNS]: Create ipv6 devconf-s for namespaces This is the core. Declare and register the pernet subsys for addrconf. The init callback the will create the devconf-s. The init_net will reuse the existing statically declared confs, so that accessing them from inside the ipv6 code will still work. The register_pernet_subsys() is moved above the ipv6_add_dev() call for loopback, because this function will need the net->devconf_dflt pointer to be already set. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:55 +00:00
kfree(net->ipv6.devconf_dflt);
kfree(net->ipv6.devconf_all);
}
}
static struct pernet_operations addrconf_ops = {
.init = addrconf_init_net,
.exit = addrconf_exit_net,
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Device notifier
*/
int register_inet6addr_notifier(struct notifier_block *nb)
{
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:49 +00:00
return atomic_notifier_chain_register(&inet6addr_chain, nb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6]: Decentralize EXPORT_SYMBOLs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-02-22 13:05:40 +00:00
EXPORT_SYMBOL(register_inet6addr_notifier);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int unregister_inet6addr_notifier(struct notifier_block *nb)
{
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
return atomic_notifier_chain_unregister(&inet6addr_chain, nb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6]: Decentralize EXPORT_SYMBOLs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-02-22 13:05:40 +00:00
EXPORT_SYMBOL(unregister_inet6addr_notifier);
ipv6: AF_INET6 link address family IPv6 already exposes some address family data via netlink in the IFLA_PROTINFO attribute if RTM_GETLINK request is sent with the address family set to AF_INET6. We take over this format and reuse all the code. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 04:33:57 +00:00
static struct rtnl_af_ops inet6_ops = {
.family = AF_INET6,
.fill_link_af = inet6_fill_link_af,
.get_link_af_size = inet6_get_link_af_size,
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Init / cleanup code
*/
int __init addrconf_init(void)
{
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
int i, err;
[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table. Policy table is implemented as an RCU linear list since we do not expect large list nor frequent updates. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 06:56:23 +00:00
addrconf: checkpatch fixes Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 23:09:01 +00:00
err = ipv6_addr_label_init();
if (err < 0) {
net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 14:11:53 +00:00
pr_crit("%s: cannot initialize default policy table: %d\n",
__func__, err);
ipv6: add a missing unregister_pernet_subsys call Clean up a missing exit path in the ipv6 module init routines. In addrconf_init we call ipv6_addr_label_init which calls register_pernet_subsys for the ipv6_addr_label_ops structure. But if module loading fails, or if the ipv6 module is removed, there is no corresponding unregister_pernet_subsys call, which leaves a now-bogus address on the pernet_list, leading to oopses in subsequent registrations. This patch cleans up both the failed load path and the unload path. Tested by myself with good results. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> include/net/addrconf.h | 1 + net/ipv6/addrconf.c | 11 ++++++++--- net/ipv6/addrlabel.c | 5 +++++ 3 files changed, 14 insertions(+), 3 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-24 09:55:52 +00:00
goto out;
[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table. Policy table is implemented as an RCU linear list since we do not expect large list nor frequent updates. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 06:56:23 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6: add a missing unregister_pernet_subsys call Clean up a missing exit path in the ipv6 module init routines. In addrconf_init we call ipv6_addr_label_init which calls register_pernet_subsys for the ipv6_addr_label_ops structure. But if module loading fails, or if the ipv6 module is removed, there is no corresponding unregister_pernet_subsys call, which leaves a now-bogus address on the pernet_list, leading to oopses in subsequent registrations. This patch cleans up both the failed load path and the unload path. Tested by myself with good results. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> include/net/addrconf.h | 1 + net/ipv6/addrconf.c | 11 ++++++++--- net/ipv6/addrlabel.c | 5 +++++ 3 files changed, 14 insertions(+), 3 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-24 09:55:52 +00:00
err = register_pernet_subsys(&addrconf_ops);
if (err < 0)
goto out_addrlabel;
[NETNS]: Create ipv6 devconf-s for namespaces This is the core. Declare and register the pernet subsys for addrconf. The init callback the will create the devconf-s. The init_net will reuse the existing statically declared confs, so that accessing them from inside the ipv6 code will still work. The register_pernet_subsys() is moved above the ipv6_add_dev() call for loopback, because this function will need the net->devconf_dflt pointer to be already set. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:55 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* The addrconf netdev notifier requires that loopback_dev
* has it's ipv6 private information allocated and setup
* before it can bring up and give link-local addresses
* to other devices which are up.
*
* Unfortunately, loopback_dev is not necessarily the first
* entry in the global dev_base list of net devices. In fact,
* it is likely to be the very last entry on that list.
* So this causes the notifier registry below to try and
* give link-local addresses to all devices besides loopback_dev
* first, then loopback_dev, which cases all the non-loopback_dev
* devices to fail to get a link-local address.
*
* So, as a temporary fix, allocate the ipv6 structure for
* loopback_dev first by hand.
* Longer term, all of the dependencies ipv6 has upon the loopback
* device and it being up should be removed.
*/
rtnl_lock();
[NET]: Make the loopback device per network namespace. This patch makes loopback_dev per network namespace. Adding code to create a different loopback device for each network namespace and adding the code to free a loopback device when a network namespace exits. This patch modifies all users the loopback_dev so they access it as init_net.loopback_dev, keeping all of the code compiling and working. A later pass will be needed to update the users to use something other than the initial network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-27 05:10:56 +00:00
if (!ipv6_add_dev(init_net.loopback_dev))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
err = -ENOMEM;
rtnl_unlock();
if (err)
[NETNS]: Create ipv6 devconf-s for namespaces This is the core. Declare and register the pernet subsys for addrconf. The init callback the will create the devconf-s. The init_net will reuse the existing statically declared confs, so that accessing them from inside the ipv6 code will still work. The register_pernet_subsys() is moved above the ipv6_add_dev() call for loopback, because this function will need the net->devconf_dflt pointer to be already set. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:55 +00:00
goto errlo;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
for (i = 0; i < IN6_ADDR_HSIZE; i++)
INIT_HLIST_HEAD(&inet6_addr_lst[i]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
register_netdevice_notifier(&ipv6_dev_notf);
addrconf_verify(0);
[IPv6]: Use rtnl registration interface Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 18:58:32 +00:00
ipv6: AF_INET6 link address family IPv6 already exposes some address family data via netlink in the IFLA_PROTINFO attribute if RTM_GETLINK request is sent with the address family set to AF_INET6. We take over this format and reuse all the code. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 04:33:57 +00:00
err = rtnl_af_register(&inet6_ops);
if (err < 0)
goto errout_af;
rtnetlink: Compute and store minimum ifinfo dump size The message size allocated for rtnl ifinfo dumps was limited to a single page. This is not enough for additional interface info available with devices that support SR-IOV and caused a bug in which VF info would not be displayed if more than approximately 40 VFs were created per interface. Implement a new function pointer for the rtnl_register service that will calculate the amount of data required for the ifinfo dump and allocate enough data to satisfy the request. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-10 01:27:09 +00:00
err = __rtnl_register(PF_INET6, RTM_GETLINK, NULL, inet6_dump_ifinfo,
NULL);
[IPv6]: Use rtnl registration interface Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 18:58:32 +00:00
if (err < 0)
goto errout;
/* Only the first call to __rtnl_register can fail */
rtnetlink: Compute and store minimum ifinfo dump size The message size allocated for rtnl ifinfo dumps was limited to a single page. This is not enough for additional interface info available with devices that support SR-IOV and caused a bug in which VF info would not be displayed if more than approximately 40 VFs were created per interface. Implement a new function pointer for the rtnl_register service that will calculate the amount of data required for the ifinfo dump and allocate enough data to satisfy the request. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-10 01:27:09 +00:00
__rtnl_register(PF_INET6, RTM_NEWADDR, inet6_rtm_newaddr, NULL, NULL);
__rtnl_register(PF_INET6, RTM_DELADDR, inet6_rtm_deladdr, NULL, NULL);
__rtnl_register(PF_INET6, RTM_GETADDR, inet6_rtm_getaddr,
inet6_dump_ifaddr, NULL);
__rtnl_register(PF_INET6, RTM_GETMULTICAST, NULL,
inet6_dump_ifmcaddr, NULL);
__rtnl_register(PF_INET6, RTM_GETANYCAST, NULL,
inet6_dump_ifacaddr, NULL);
rtnl/ipv6: add support of RTM_GETNETCONF This message allows to get the devconf for an interface. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 22:28:51 +00:00
__rtnl_register(PF_INET6, RTM_GETNETCONF, inet6_netconf_get_devconf,
NULL, NULL);
[IPv6]: Use rtnl registration interface Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 18:58:32 +00:00
[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table. Policy table is implemented as an RCU linear list since we do not expect large list nor frequent updates. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 06:56:23 +00:00
ipv6_addr_label_rtnl_register();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return 0;
[IPv6]: Use rtnl registration interface Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 18:58:32 +00:00
errout:
ipv6: AF_INET6 link address family IPv6 already exposes some address family data via netlink in the IFLA_PROTINFO attribute if RTM_GETLINK request is sent with the address family set to AF_INET6. We take over this format and reuse all the code. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 04:33:57 +00:00
rtnl_af_unregister(&inet6_ops);
errout_af:
[IPv6]: Use rtnl registration interface Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 18:58:32 +00:00
unregister_netdevice_notifier(&ipv6_dev_notf);
[NETNS]: Create ipv6 devconf-s for namespaces This is the core. Declare and register the pernet subsys for addrconf. The init callback the will create the devconf-s. The init_net will reuse the existing statically declared confs, so that accessing them from inside the ipv6 code will still work. The register_pernet_subsys() is moved above the ipv6_add_dev() call for loopback, because this function will need the net->devconf_dflt pointer to be already set. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:55 +00:00
errlo:
unregister_pernet_subsys(&addrconf_ops);
ipv6: add a missing unregister_pernet_subsys call Clean up a missing exit path in the ipv6 module init routines. In addrconf_init we call ipv6_addr_label_init which calls register_pernet_subsys for the ipv6_addr_label_ops structure. But if module loading fails, or if the ipv6 module is removed, there is no corresponding unregister_pernet_subsys call, which leaves a now-bogus address on the pernet_list, leading to oopses in subsequent registrations. This patch cleans up both the failed load path and the unload path. Tested by myself with good results. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> include/net/addrconf.h | 1 + net/ipv6/addrconf.c | 11 ++++++++--- net/ipv6/addrlabel.c | 5 +++++ 3 files changed, 14 insertions(+), 3 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-24 09:55:52 +00:00
out_addrlabel:
ipv6_addr_label_cleanup();
out:
[IPv6]: Use rtnl registration interface Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 18:58:32 +00:00
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[IPV6]: fix section mismatch warnings Removed useless and buggy __exit section in the different ipv6 subsystems. Otherwise they will be called inside an init section during rollbacking in case of an error in the protocol initialization. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-13 13:34:58 +00:00
void addrconf_cleanup(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
netns: fix addrconf_ifdown kernel panic When a network namespace is destroyed the network interfaces are all unregistered, making addrconf_ifdown called by the netdevice notifier. In the other hand, the addrconf exit method does a loop on the network devices and does addrconf_ifdown on each of them. But the ordering of the netns subsystem is not right because it uses the register_pernet_device instead of register_pernet_subsys. If we handle the loopback as any network device, we can safely use register_pernet_subsys. But if we use register_pernet_subsys, the addrconf exit method will do exactly what was already done with the unregistering of the network devices. So in definitive, this code is pointless. I removed the netns addrconf exit method and moved the code to the addrconf cleanup function. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 09:06:45 +00:00
struct net_device *dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int i;
unregister_netdevice_notifier(&ipv6_dev_notf);
[NETNS]: Create ipv6 devconf-s for namespaces This is the core. Declare and register the pernet subsys for addrconf. The init callback the will create the devconf-s. The init_net will reuse the existing statically declared confs, so that accessing them from inside the ipv6 code will still work. The register_pernet_subsys() is moved above the ipv6_add_dev() call for loopback, because this function will need the net->devconf_dflt pointer to be already set. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 01:42:55 +00:00
unregister_pernet_subsys(&addrconf_ops);
ipv6: add a missing unregister_pernet_subsys call Clean up a missing exit path in the ipv6 module init routines. In addrconf_init we call ipv6_addr_label_init which calls register_pernet_subsys for the ipv6_addr_label_ops structure. But if module loading fails, or if the ipv6 module is removed, there is no corresponding unregister_pernet_subsys call, which leaves a now-bogus address on the pernet_list, leading to oopses in subsequent registrations. This patch cleans up both the failed load path and the unload path. Tested by myself with good results. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> include/net/addrconf.h | 1 + net/ipv6/addrconf.c | 11 ++++++++--- net/ipv6/addrlabel.c | 5 +++++ 3 files changed, 14 insertions(+), 3 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-24 09:55:52 +00:00
ipv6_addr_label_cleanup();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
rtnl_lock();
ipv6: AF_INET6 link address family IPv6 already exposes some address family data via netlink in the IFLA_PROTINFO attribute if RTM_GETLINK request is sent with the address family set to AF_INET6. We take over this format and reuse all the code. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 04:33:57 +00:00
__rtnl_af_unregister(&inet6_ops);
netns: fix addrconf_ifdown kernel panic When a network namespace is destroyed the network interfaces are all unregistered, making addrconf_ifdown called by the netdevice notifier. In the other hand, the addrconf exit method does a loop on the network devices and does addrconf_ifdown on each of them. But the ordering of the netns subsystem is not right because it uses the register_pernet_device instead of register_pernet_subsys. If we handle the loopback as any network device, we can safely use register_pernet_subsys. But if we use register_pernet_subsys, the addrconf exit method will do exactly what was already done with the unregistering of the network devices. So in definitive, this code is pointless. I removed the netns addrconf exit method and moved the code to the addrconf cleanup function. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 09:06:45 +00:00
/* clean dev list */
for_each_netdev(&init_net, dev) {
if (__in6_dev_get(dev) == NULL)
continue;
addrconf_ifdown(dev, 1);
}
addrconf_ifdown(init_net.loopback_dev, 2);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Check hash table.
*/
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
spin_lock_bh(&addrconf_hash_lock);
ipv6: convert addrconf list to hlist Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:10 +00:00
for (i = 0; i < IN6_ADDR_HSIZE; i++)
WARN_ON(!hlist_empty(&inet6_addr_lst[i]));
IPv6: convert addrconf hash list to RCU Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 20:31:11 +00:00
spin_unlock_bh(&addrconf_hash_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
del_timer(&addr_chk_timer);
rtnl_unlock();
}
Reference in a new issue Copy permalink