linux/drivers/usb/gadget/mv_udc_phy.c

215 lines
5.8 KiB
C
Raw Normal View History

#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/io.h>
#include <linux/errno.h>
#include <mach/cputype.h>
#ifdef CONFIG_ARCH_MMP
#define UTMI_REVISION 0x0
#define UTMI_CTRL 0x4
#define UTMI_PLL 0x8
#define UTMI_TX 0xc
#define UTMI_RX 0x10
#define UTMI_IVREF 0x14
#define UTMI_T0 0x18
#define UTMI_T1 0x1c
#define UTMI_T2 0x20
#define UTMI_T3 0x24
#define UTMI_T4 0x28
#define UTMI_T5 0x2c
#define UTMI_RESERVE 0x30
#define UTMI_USB_INT 0x34
#define UTMI_DBG_CTL 0x38
#define UTMI_OTG_ADDON 0x3c
/* For UTMICTRL Register */
#define UTMI_CTRL_USB_CLK_EN (1 << 31)
/* pxa168 */
#define UTMI_CTRL_SUSPEND_SET1 (1 << 30)
#define UTMI_CTRL_SUSPEND_SET2 (1 << 29)
#define UTMI_CTRL_RXBUF_PDWN (1 << 24)
#define UTMI_CTRL_TXBUF_PDWN (1 << 11)
#define UTMI_CTRL_INPKT_DELAY_SHIFT 30
#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT 28
#define UTMI_CTRL_PU_REF_SHIFT 20
#define UTMI_CTRL_ARC_PULLDN_SHIFT 12
#define UTMI_CTRL_PLL_PWR_UP_SHIFT 1
#define UTMI_CTRL_PWR_UP_SHIFT 0
/* For UTMI_PLL Register */
#define UTMI_PLL_CLK_BLK_EN_SHIFT 24
#define UTMI_PLL_FBDIV_SHIFT 4
#define UTMI_PLL_REFDIV_SHIFT 0
#define UTMI_PLL_FBDIV_MASK 0x00000FF0
#define UTMI_PLL_REFDIV_MASK 0x0000000F
#define UTMI_PLL_ICP_MASK 0x00007000
#define UTMI_PLL_KVCO_MASK 0x00031000
#define UTMI_PLL_PLLCALI12_SHIFT 29
#define UTMI_PLL_PLLCALI12_MASK (0x3 << 29)
#define UTMI_PLL_PLLVDD18_SHIFT 27
#define UTMI_PLL_PLLVDD18_MASK (0x3 << 27)
#define UTMI_PLL_PLLVDD12_SHIFT 25
#define UTMI_PLL_PLLVDD12_MASK (0x3 << 25)
#define UTMI_PLL_KVCO_SHIFT 15
#define UTMI_PLL_ICP_SHIFT 12
/* For UTMI_TX Register */
#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT 27
#define UTMI_TX_REG_EXT_FS_RCAL_MASK (0xf << 27)
#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK 26
#define UTMI_TX_REG_EXT_FS_RCAL_EN (0x1 << 26)
#define UTMI_TX_LOW_VDD_EN_SHIFT 11
#define UTMI_TX_IMPCAL_VTH_SHIFT 14
#define UTMI_TX_IMPCAL_VTH_MASK (0x7 << 14)
#define UTMI_TX_CK60_PHSEL_SHIFT 17
#define UTMI_TX_CK60_PHSEL_MASK (0xf << 17)
#define UTMI_TX_TXVDD12_SHIFT 22
#define UTMI_TX_TXVDD12_MASK (0x3 << 22)
#define UTMI_TX_AMP_SHIFT 0
#define UTMI_TX_AMP_MASK (0x7 << 0)
/* For UTMI_RX Register */
#define UTMI_RX_SQ_THRESH_SHIFT 4
#define UTMI_RX_SQ_THRESH_MASK (0xf << 4)
#define UTMI_REG_SQ_LENGTH_SHIFT 15
#define UTMI_REG_SQ_LENGTH_MASK (0x3 << 15)
#define REG_RCAL_START 0x00001000
#define VCOCAL_START 0x00200000
#define KVCO_EXT 0x00400000
#define PLL_READY 0x00800000
#define CLK_BLK_EN 0x01000000
#endif
static unsigned int u2o_read(unsigned int base, unsigned int offset)
{
return readl(base + offset);
}
static void u2o_set(unsigned int base, unsigned int offset, unsigned int value)
{
unsigned int reg;
reg = readl(base + offset);
reg |= value;
writel(reg, base + offset);
readl(base + offset);
}
static void u2o_clear(unsigned int base, unsigned int offset,
unsigned int value)
{
unsigned int reg;
reg = readl(base + offset);
reg &= ~value;
writel(reg, base + offset);
readl(base + offset);
}
static void u2o_write(unsigned int base, unsigned int offset,
unsigned int value)
{
writel(value, base + offset);
readl(base + offset);
}
#ifdef CONFIG_ARCH_MMP
int mv_udc_phy_init(unsigned int base)
{
unsigned long timeout;
/* Initialize the USB PHY power */
if (cpu_is_pxa910()) {
u2o_set(base, UTMI_CTRL, (1 << UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
| (1 << UTMI_CTRL_PU_REF_SHIFT));
}
u2o_set(base, UTMI_CTRL, 1 << UTMI_CTRL_PLL_PWR_UP_SHIFT);
u2o_set(base, UTMI_CTRL, 1 << UTMI_CTRL_PWR_UP_SHIFT);
/* UTMI_PLL settings */
u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
u2o_set(base, UTMI_PLL, (0xee << UTMI_PLL_FBDIV_SHIFT)
| (0xb << UTMI_PLL_REFDIV_SHIFT)
| (3 << UTMI_PLL_PLLVDD18_SHIFT)
| (3 << UTMI_PLL_PLLVDD12_SHIFT)
| (3 << UTMI_PLL_PLLCALI12_SHIFT)
| (1 << UTMI_PLL_ICP_SHIFT) | (3 << UTMI_PLL_KVCO_SHIFT));
/* UTMI_TX */
u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
| UTMI_TX_TXVDD12_MASK
| UTMI_TX_CK60_PHSEL_MASK | UTMI_TX_IMPCAL_VTH_MASK
| UTMI_TX_REG_EXT_FS_RCAL_MASK | UTMI_TX_AMP_MASK);
u2o_set(base, UTMI_TX, (3 << UTMI_TX_TXVDD12_SHIFT)
| (4 << UTMI_TX_CK60_PHSEL_SHIFT)
| (4 << UTMI_TX_IMPCAL_VTH_SHIFT)
| (8 << UTMI_TX_REG_EXT_FS_RCAL_SHIFT)
| (3 << UTMI_TX_AMP_SHIFT));
/* UTMI_RX */
u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
| UTMI_REG_SQ_LENGTH_MASK);
if (cpu_is_pxa168())
u2o_set(base, UTMI_RX, (7 << UTMI_RX_SQ_THRESH_SHIFT)
| (2 << UTMI_REG_SQ_LENGTH_SHIFT));
else
u2o_set(base, UTMI_RX, (0x7 << UTMI_RX_SQ_THRESH_SHIFT)
| (2 << UTMI_REG_SQ_LENGTH_SHIFT));
/* UTMI_IVREF */
if (cpu_is_pxa168())
/*
* fixing Microsoft Altair board interface with NEC hub issue -
* Set UTMI_IVREF from 0x4a3 to 0x4bf
*/
u2o_write(base, UTMI_IVREF, 0x4bf);
/* calibrate */
timeout = jiffies + 100;
while ((u2o_read(base, UTMI_PLL) & PLL_READY) == 0) {
if (time_after(jiffies, timeout))
return -ETIME;
cpu_relax();
}
/* toggle VCOCAL_START bit of UTMI_PLL */
udelay(200);
u2o_set(base, UTMI_PLL, VCOCAL_START);
udelay(40);
u2o_clear(base, UTMI_PLL, VCOCAL_START);
/* toggle REG_RCAL_START bit of UTMI_TX */
udelay(200);
u2o_set(base, UTMI_TX, REG_RCAL_START);
udelay(40);
u2o_clear(base, UTMI_TX, REG_RCAL_START);
udelay(200);
/* make sure phy is ready */
timeout = jiffies + 100;
while ((u2o_read(base, UTMI_PLL) & PLL_READY) == 0) {
if (time_after(jiffies, timeout))
return -ETIME;
cpu_relax();
}
if (cpu_is_pxa168()) {
u2o_set(base, UTMI_RESERVE, 1 << 5);
/* Turn on UTMI PHY OTG extension */
u2o_write(base, UTMI_OTG_ADDON, 1);
}
return 0;
}
#else
int mv_udc_phy_init(unsigned int base)
{
return 0;
}
#endif