linux/arch/x86/kernel/summit_32.c

189 lines
5.2 KiB
C
Raw Normal View History

/*
* IBM Summit-Specific Code
*
* Written By: Matthew Dobson, IBM Corporation
*
* Copyright (c) 2003 IBM Corp.
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <colpatch@us.ibm.com>
*
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/bios_ebda.h>
#include <asm/summit/mpparse.h>
static struct rio_table_hdr *rio_table_hdr __initdata;
static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata;
static struct rio_detail *rio_devs[MAX_NUMNODES*4] __initdata;
#ifndef CONFIG_X86_NUMAQ
static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
#endif
static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
{
int twister = 0, node = 0;
int i, bus, num_buses;
for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) {
twister = rio_devs[i]->owner_id;
break;
}
}
if (i == rio_table_hdr->num_rio_dev) {
printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __func__);
return last_bus;
}
for (i = 0; i < rio_table_hdr->num_scal_dev; i++) {
if (scal_devs[i]->node_id == twister) {
node = scal_devs[i]->node_id;
break;
}
}
if (i == rio_table_hdr->num_scal_dev) {
printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __func__);
return last_bus;
}
switch (rio_devs[wpeg_num]->type) {
case CompatWPEG:
/*
* The Compatibility Winnipeg controls the 2 legacy buses,
* the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
* a PCI-PCI bridge card is used in either slot: total 5 buses.
*/
num_buses = 5;
break;
case AltWPEG:
/*
* The Alternate Winnipeg controls the 2 133MHz buses [1 slot
* each], their 2 "extra" buses, the 100MHz bus [2 slots] and
* the "extra" buses for each of those slots: total 7 buses.
*/
num_buses = 7;
break;
case LookOutAWPEG:
case LookOutBWPEG:
/*
* A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
* & the "extra" buses for each of those slots: total 9 buses.
*/
num_buses = 9;
break;
default:
printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __func__);
return last_bus;
}
for (bus = last_bus; bus < last_bus + num_buses; bus++)
mp_bus_id_to_node[bus] = node;
return bus;
}
static int __init build_detail_arrays(void)
{
unsigned long ptr;
int i, scal_detail_size, rio_detail_size;
if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
printk(KERN_WARNING "%s: MAX_NUMNODES too low! Defined as %d, but system has %d nodes.\n", __func__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
return 0;
}
switch (rio_table_hdr->version) {
default:
printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __func__, rio_table_hdr->version);
return 0;
case 2:
scal_detail_size = 11;
rio_detail_size = 13;
break;
case 3:
scal_detail_size = 12;
rio_detail_size = 15;
break;
}
ptr = (unsigned long)rio_table_hdr + 3;
for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
scal_devs[i] = (struct scal_detail *)ptr;
for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
rio_devs[i] = (struct rio_detail *)ptr;
return 1;
}
void __init setup_summit(void)
{
unsigned long ptr;
unsigned short offset;
int i, next_wpeg, next_bus = 0;
/* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
ptr = get_bios_ebda();
ptr = (unsigned long)phys_to_virt(ptr);
rio_table_hdr = NULL;
offset = 0x180;
while (offset) {
/* The block id is stored in the 2nd word */
if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) {
/* set the pointer past the offset & block id */
rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
break;
}
/* The next offset is stored in the 1st word. 0 means no more */
offset = *((unsigned short *)(ptr + offset));
}
if (!rio_table_hdr) {
printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __func__);
return;
}
if (!build_detail_arrays())
return;
/* The first Winnipeg we're looking for has an index of 0 */
next_wpeg = 0;
do {
for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) {
/* It's the Winnipeg we're looking for! */
next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
next_wpeg++;
break;
}
}
/*
* If we go through all Rio devices and don't find one with
* the next index, it means we've found all the Winnipegs,
* and thus all the PCI buses.
*/
if (i == rio_table_hdr->num_rio_dev)
next_wpeg = 0;
} while (next_wpeg != 0);
}