linux/drivers/clk/clk-u300.c

747 lines
21 KiB
C
Raw Normal View History

/*
* U300 clock implementation
* Copyright (C) 2007-2012 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* Author: Linus Walleij <linus.walleij@stericsson.com>
* Author: Jonas Aaberg <jonas.aberg@stericsson.com>
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk-provider.h>
#include <linux/spinlock.h>
#include <mach/syscon.h>
/*
* The clocking hierarchy currently looks like this.
* NOTE: the idea is NOT to show how the clocks are routed on the chip!
* The ideas is to show dependencies, so a clock higher up in the
* hierarchy has to be on in order for another clock to be on. Now,
* both CPU and DMA can actually be on top of the hierarchy, and that
* is not modeled currently. Instead we have the backbone AMBA bus on
* top. This bus cannot be programmed in any way but conceptually it
* needs to be active for the bridges and devices to transport data.
*
* Please be aware that a few clocks are hw controlled, which mean that
* the hw itself can turn on/off or change the rate of the clock when
* needed!
*
* AMBA bus
* |
* +- CPU
* +- FSMC NANDIF NAND Flash interface
* +- SEMI Shared Memory interface
* +- ISP Image Signal Processor (U335 only)
* +- CDS (U335 only)
* +- DMA Direct Memory Access Controller
* +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
* +- APEX
* +- VIDEO_ENC AVE2/3 Video Encoder
* +- XGAM Graphics Accelerator Controller
* +- AHB
* |
* +- ahb:0 AHB Bridge
* | |
* | +- ahb:1 INTCON Interrupt controller
* | +- ahb:3 MSPRO Memory Stick Pro controller
* | +- ahb:4 EMIF External Memory interface
* |
* +- fast:0 FAST bridge
* | |
* | +- fast:1 MMCSD MMC/SD card reader controller
* | +- fast:2 I2S0 PCM I2S channel 0 controller
* | +- fast:3 I2S1 PCM I2S channel 1 controller
* | +- fast:4 I2C0 I2C channel 0 controller
* | +- fast:5 I2C1 I2C channel 1 controller
* | +- fast:6 SPI SPI controller
* | +- fast:7 UART1 Secondary UART (U335 only)
* |
* +- slow:0 SLOW bridge
* |
* +- slow:1 SYSCON (not possible to control)
* +- slow:2 WDOG Watchdog
* +- slow:3 UART0 primary UART
* +- slow:4 TIMER_APP Application timer - used in Linux
* +- slow:5 KEYPAD controller
* +- slow:6 GPIO controller
* +- slow:7 RTC controller
* +- slow:8 BT Bus Tracer (not used currently)
* +- slow:9 EH Event Handler (not used currently)
* +- slow:a TIMER_ACC Access style timer (not used currently)
* +- slow:b PPM (U335 only, what is that?)
*/
/* Global syscon virtual base */
static void __iomem *syscon_vbase;
/**
* struct clk_syscon - U300 syscon clock
* @hw: corresponding clock hardware entry
* @hw_ctrld: whether this clock is hardware controlled (for refcount etc)
* and does not need any magic pokes to be enabled/disabled
* @reset: state holder, whether this block's reset line is asserted or not
* @res_reg: reset line enable/disable flag register
* @res_bit: bit for resetting or taking this consumer out of reset
* @en_reg: clock line enable/disable flag register
* @en_bit: bit for enabling/disabling this consumer clock line
* @clk_val: magic value to poke in the register to enable/disable
* this one clock
*/
struct clk_syscon {
struct clk_hw hw;
bool hw_ctrld;
bool reset;
void __iomem *res_reg;
u8 res_bit;
void __iomem *en_reg;
u8 en_bit;
u16 clk_val;
};
#define to_syscon(_hw) container_of(_hw, struct clk_syscon, hw)
static DEFINE_SPINLOCK(syscon_resetreg_lock);
/*
* Reset control functions. We remember if a block has been
* taken out of reset and don't remove the reset assertion again
* and vice versa. Currently we only remove resets so the
* enablement function is defined out.
*/
static void syscon_block_reset_enable(struct clk_syscon *sclk)
{
unsigned long iflags;
u16 val;
/* Not all blocks support resetting */
if (!sclk->res_reg)
return;
spin_lock_irqsave(&syscon_resetreg_lock, iflags);
val = readw(sclk->res_reg);
val |= BIT(sclk->res_bit);
writew(val, sclk->res_reg);
spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
sclk->reset = true;
}
static void syscon_block_reset_disable(struct clk_syscon *sclk)
{
unsigned long iflags;
u16 val;
/* Not all blocks support resetting */
if (!sclk->res_reg)
return;
spin_lock_irqsave(&syscon_resetreg_lock, iflags);
val = readw(sclk->res_reg);
val &= ~BIT(sclk->res_bit);
writew(val, sclk->res_reg);
spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
sclk->reset = false;
}
static int syscon_clk_prepare(struct clk_hw *hw)
{
struct clk_syscon *sclk = to_syscon(hw);
/* If the block is in reset, bring it out */
if (sclk->reset)
syscon_block_reset_disable(sclk);
return 0;
}
static void syscon_clk_unprepare(struct clk_hw *hw)
{
struct clk_syscon *sclk = to_syscon(hw);
/* Please don't force the console into reset */
if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN)
return;
/* When unpreparing, force block into reset */
if (!sclk->reset)
syscon_block_reset_enable(sclk);
}
static int syscon_clk_enable(struct clk_hw *hw)
{
struct clk_syscon *sclk = to_syscon(hw);
/* Don't touch the hardware controlled clocks */
if (sclk->hw_ctrld)
return 0;
/* These cannot be controlled */
if (sclk->clk_val == 0xFFFFU)
return 0;
writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCER);
return 0;
}
static void syscon_clk_disable(struct clk_hw *hw)
{
struct clk_syscon *sclk = to_syscon(hw);
/* Don't touch the hardware controlled clocks */
if (sclk->hw_ctrld)
return;
if (sclk->clk_val == 0xFFFFU)
return;
/* Please don't disable the console port */
if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN)
return;
writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCDR);
}
static int syscon_clk_is_enabled(struct clk_hw *hw)
{
struct clk_syscon *sclk = to_syscon(hw);
u16 val;
/* If no enable register defined, it's always-on */
if (!sclk->en_reg)
return 1;
val = readw(sclk->en_reg);
val &= BIT(sclk->en_bit);
return val ? 1 : 0;
}
static u16 syscon_get_perf(void)
{
u16 val;
val = readw(syscon_vbase + U300_SYSCON_CCR);
val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
return val;
}
static unsigned long
syscon_clk_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_syscon *sclk = to_syscon(hw);
u16 perf = syscon_get_perf();
switch(sclk->clk_val) {
case U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN:
case U300_SYSCON_SBCER_I2C0_CLK_EN:
case U300_SYSCON_SBCER_I2C1_CLK_EN:
case U300_SYSCON_SBCER_MMC_CLK_EN:
case U300_SYSCON_SBCER_SPI_CLK_EN:
/* The FAST clocks have one progression */
switch(perf) {
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
return 13000000;
default:
return parent_rate; /* 26 MHz */
}
case U300_SYSCON_SBCER_DMAC_CLK_EN:
case U300_SYSCON_SBCER_NANDIF_CLK_EN:
case U300_SYSCON_SBCER_XGAM_CLK_EN:
/* AMBA interconnect peripherals */
switch(perf) {
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
return 6500000;
case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
return 26000000;
default:
return parent_rate; /* 52 MHz */
}
case U300_SYSCON_SBCER_SEMI_CLK_EN:
case U300_SYSCON_SBCER_EMIF_CLK_EN:
/* EMIF speeds */
switch(perf) {
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
return 13000000;
case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
return 52000000;
default:
return 104000000;
}
case U300_SYSCON_SBCER_CPU_CLK_EN:
/* And the fast CPU clock */
switch(perf) {
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
return 13000000;
case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
return 52000000;
case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
return 104000000;
default:
return parent_rate; /* 208 MHz */
}
default:
/*
* The SLOW clocks and default just inherit the rate of
* their parent (typically PLL13 13 MHz).
*/
return parent_rate;
}
}
static long
syscon_clk_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
struct clk_syscon *sclk = to_syscon(hw);
if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN)
return *prate;
/* We really only support setting the rate of the CPU clock */
if (rate <= 13000000)
return 13000000;
if (rate <= 52000000)
return 52000000;
if (rate <= 104000000)
return 104000000;
return 208000000;
}
static int syscon_clk_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_syscon *sclk = to_syscon(hw);
u16 val;
/* We only support setting the rate of the CPU clock */
if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN)
return -EINVAL;
switch (rate) {
case 13000000:
val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
break;
case 52000000:
val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
break;
case 104000000:
val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
break;
case 208000000:
val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
break;
default:
return -EINVAL;
}
val |= readw(syscon_vbase + U300_SYSCON_CCR) &
~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
writew(val, syscon_vbase + U300_SYSCON_CCR);
return 0;
}
static const struct clk_ops syscon_clk_ops = {
.prepare = syscon_clk_prepare,
.unprepare = syscon_clk_unprepare,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.is_enabled = syscon_clk_is_enabled,
.recalc_rate = syscon_clk_recalc_rate,
.round_rate = syscon_clk_round_rate,
.set_rate = syscon_clk_set_rate,
};
static struct clk * __init
syscon_clk_register(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
bool hw_ctrld,
void __iomem *res_reg, u8 res_bit,
void __iomem *en_reg, u8 en_bit,
u16 clk_val)
{
struct clk *clk;
struct clk_syscon *sclk;
struct clk_init_data init;
sclk = kzalloc(sizeof(struct clk_syscon), GFP_KERNEL);
if (!sclk) {
pr_err("could not allocate syscon clock %s\n",
name);
return ERR_PTR(-ENOMEM);
}
init.name = name;
init.ops = &syscon_clk_ops;
init.flags = flags;
init.parent_names = (parent_name ? &parent_name : NULL);
init.num_parents = (parent_name ? 1 : 0);
sclk->hw.init = &init;
sclk->hw_ctrld = hw_ctrld;
/* Assume the block is in reset at registration */
sclk->reset = true;
sclk->res_reg = res_reg;
sclk->res_bit = res_bit;
sclk->en_reg = en_reg;
sclk->en_bit = en_bit;
sclk->clk_val = clk_val;
clk = clk_register(dev, &sclk->hw);
if (IS_ERR(clk))
kfree(sclk);
return clk;
}
/**
* struct clk_mclk - U300 MCLK clock (MMC/SD clock)
* @hw: corresponding clock hardware entry
* @is_mspro: if this is the memory stick clock rather than MMC/SD
*/
struct clk_mclk {
struct clk_hw hw;
bool is_mspro;
};
#define to_mclk(_hw) container_of(_hw, struct clk_mclk, hw)
static int mclk_clk_prepare(struct clk_hw *hw)
{
struct clk_mclk *mclk = to_mclk(hw);
u16 val;
/* The MMC and MSPRO clocks need some special set-up */
if (!mclk->is_mspro) {
/* Set default MMC clock divisor to 18.9 MHz */
writew(0x0054U, syscon_vbase + U300_SYSCON_MMF0R);
val = readw(syscon_vbase + U300_SYSCON_MMCR);
/* Disable the MMC feedback clock */
val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
/* Disable MSPRO frequency */
val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
writew(val, syscon_vbase + U300_SYSCON_MMCR);
} else {
val = readw(syscon_vbase + U300_SYSCON_MMCR);
/* Disable the MMC feedback clock */
val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
/* Enable MSPRO frequency */
val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
writew(val, syscon_vbase + U300_SYSCON_MMCR);
}
return 0;
}
static unsigned long
mclk_clk_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
u16 perf = syscon_get_perf();
switch (perf) {
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
/*
* Here, the 208 MHz PLL gets shut down and the always
* on 13 MHz PLL used for RTC etc kicks into use
* instead.
*/
return 13000000;
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
{
/*
* This clock is under program control. The register is
* divided in two nybbles, bit 7-4 gives cycles-1 to count
* high, bit 3-0 gives cycles-1 to count low. Distribute
* these with no more than 1 cycle difference between
* low and high and add low and high to get the actual
* divisor. The base PLL is 208 MHz. Writing 0x00 will
* divide by 1 and 1 so the highest frequency possible
* is 104 MHz.
*
* e.g. 0x54 =>
* f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
*/
u16 val = readw(syscon_vbase + U300_SYSCON_MMF0R) &
U300_SYSCON_MMF0R_MASK;
switch (val) {
case 0x0054:
return 18900000;
case 0x0044:
return 20800000;
case 0x0043:
return 23100000;
case 0x0033:
return 26000000;
case 0x0032:
return 29700000;
case 0x0022:
return 34700000;
case 0x0021:
return 41600000;
case 0x0011:
return 52000000;
case 0x0000:
return 104000000;
default:
break;
}
}
default:
break;
}
return parent_rate;
}
static long
mclk_clk_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
if (rate <= 18900000)
return 18900000;
if (rate <= 20800000)
return 20800000;
if (rate <= 23100000)
return 23100000;
if (rate <= 26000000)
return 26000000;
if (rate <= 29700000)
return 29700000;
if (rate <= 34700000)
return 34700000;
if (rate <= 41600000)
return 41600000;
/* Highest rate */
return 52000000;
}
static int mclk_clk_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
u16 val;
u16 reg;
switch (rate) {
case 18900000:
val = 0x0054;
break;
case 20800000:
val = 0x0044;
break;
case 23100000:
val = 0x0043;
break;
case 26000000:
val = 0x0033;
break;
case 29700000:
val = 0x0032;
break;
case 34700000:
val = 0x0022;
break;
case 41600000:
val = 0x0021;
break;
case 52000000:
val = 0x0011;
break;
case 104000000:
val = 0x0000;
break;
default:
return -EINVAL;
}
reg = readw(syscon_vbase + U300_SYSCON_MMF0R) &
~U300_SYSCON_MMF0R_MASK;
writew(reg | val, syscon_vbase + U300_SYSCON_MMF0R);
return 0;
}
static const struct clk_ops mclk_ops = {
.prepare = mclk_clk_prepare,
.recalc_rate = mclk_clk_recalc_rate,
.round_rate = mclk_clk_round_rate,
.set_rate = mclk_clk_set_rate,
};
static struct clk * __init
mclk_clk_register(struct device *dev, const char *name,
const char *parent_name, bool is_mspro)
{
struct clk *clk;
struct clk_mclk *mclk;
struct clk_init_data init;
mclk = kzalloc(sizeof(struct clk_mclk), GFP_KERNEL);
if (!mclk) {
pr_err("could not allocate MMC/SD clock %s\n",
name);
return ERR_PTR(-ENOMEM);
}
init.name = "mclk";
init.ops = &mclk_ops;
init.flags = 0;
init.parent_names = (parent_name ? &parent_name : NULL);
init.num_parents = (parent_name ? 1 : 0);
mclk->hw.init = &init;
mclk->is_mspro = is_mspro;
clk = clk_register(dev, &mclk->hw);
if (IS_ERR(clk))
kfree(mclk);
return clk;
}
void __init u300_clk_init(void __iomem *base)
{
u16 val;
struct clk *clk;
syscon_vbase = base;
/* Set system to run at PLL208, max performance, a known state. */
val = readw(syscon_vbase + U300_SYSCON_CCR);
val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
writew(val, syscon_vbase + U300_SYSCON_CCR);
/* Wait for the PLL208 to lock if not locked in yet */
while (!(readw(syscon_vbase + U300_SYSCON_CSR) &
U300_SYSCON_CSR_PLL208_LOCK_IND));
/* Power management enable */
val = readw(syscon_vbase + U300_SYSCON_PMCR);
val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
writew(val, syscon_vbase + U300_SYSCON_PMCR);
/* These are always available (RTC and PLL13) */
clk = clk_register_fixed_rate(NULL, "app_32_clk", NULL,
CLK_IS_ROOT, 32768);
/* The watchdog sits directly on the 32 kHz clock */
clk_register_clkdev(clk, NULL, "coh901327_wdog");
clk = clk_register_fixed_rate(NULL, "pll13", NULL,
CLK_IS_ROOT, 13000000);
/* These derive from PLL208 */
clk = clk_register_fixed_rate(NULL, "pll208", NULL,
CLK_IS_ROOT, 208000000);
clk = clk_register_fixed_factor(NULL, "app_208_clk", "pll208",
0, 1, 1);
clk = clk_register_fixed_factor(NULL, "app_104_clk", "pll208",
0, 1, 2);
clk = clk_register_fixed_factor(NULL, "app_52_clk", "pll208",
0, 1, 4);
/* The 52 MHz is divided down to 26 MHz */
clk = clk_register_fixed_factor(NULL, "app_26_clk", "app_52_clk",
0, 1, 2);
/* Directly on the AMBA interconnect */
clk = syscon_clk_register(NULL, "cpu_clk", "app_208_clk", 0, true,
syscon_vbase + U300_SYSCON_RRR, 3,
syscon_vbase + U300_SYSCON_CERR, 3,
U300_SYSCON_SBCER_CPU_CLK_EN);
clk = syscon_clk_register(NULL, "dmac_clk", "app_52_clk", 0, true,
syscon_vbase + U300_SYSCON_RRR, 4,
syscon_vbase + U300_SYSCON_CERR, 4,
U300_SYSCON_SBCER_DMAC_CLK_EN);
clk_register_clkdev(clk, NULL, "dma");
clk = syscon_clk_register(NULL, "fsmc_clk", "app_52_clk", 0, false,
syscon_vbase + U300_SYSCON_RRR, 6,
syscon_vbase + U300_SYSCON_CERR, 6,
U300_SYSCON_SBCER_NANDIF_CLK_EN);
clk_register_clkdev(clk, NULL, "fsmc-nand");
clk = syscon_clk_register(NULL, "xgam_clk", "app_52_clk", 0, true,
syscon_vbase + U300_SYSCON_RRR, 8,
syscon_vbase + U300_SYSCON_CERR, 8,
U300_SYSCON_SBCER_XGAM_CLK_EN);
clk_register_clkdev(clk, NULL, "xgam");
clk = syscon_clk_register(NULL, "semi_clk", "app_104_clk", 0, false,
syscon_vbase + U300_SYSCON_RRR, 9,
syscon_vbase + U300_SYSCON_CERR, 9,
U300_SYSCON_SBCER_SEMI_CLK_EN);
clk_register_clkdev(clk, NULL, "semi");
/* AHB bridge clocks */
clk = syscon_clk_register(NULL, "ahb_subsys_clk", "app_52_clk", 0, true,
syscon_vbase + U300_SYSCON_RRR, 10,
syscon_vbase + U300_SYSCON_CERR, 10,
U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN);
clk = syscon_clk_register(NULL, "intcon_clk", "ahb_subsys_clk", 0, false,
syscon_vbase + U300_SYSCON_RRR, 12,
syscon_vbase + U300_SYSCON_CERR, 12,
/* Cannot be enabled, just taken out of reset */
0xFFFFU);
clk_register_clkdev(clk, NULL, "intcon");
clk = syscon_clk_register(NULL, "emif_clk", "ahb_subsys_clk", 0, false,
syscon_vbase + U300_SYSCON_RRR, 5,
syscon_vbase + U300_SYSCON_CERR, 5,
U300_SYSCON_SBCER_EMIF_CLK_EN);
clk_register_clkdev(clk, NULL, "pl172");
/* FAST bridge clocks */
clk = syscon_clk_register(NULL, "fast_clk", "app_26_clk", 0, true,
syscon_vbase + U300_SYSCON_RFR, 0,
syscon_vbase + U300_SYSCON_CEFR, 0,
U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN);
clk = syscon_clk_register(NULL, "i2c0_p_clk", "fast_clk", 0, false,
syscon_vbase + U300_SYSCON_RFR, 1,
syscon_vbase + U300_SYSCON_CEFR, 1,
U300_SYSCON_SBCER_I2C0_CLK_EN);
clk_register_clkdev(clk, NULL, "stu300.0");
clk = syscon_clk_register(NULL, "i2c1_p_clk", "fast_clk", 0, false,
syscon_vbase + U300_SYSCON_RFR, 2,
syscon_vbase + U300_SYSCON_CEFR, 2,
U300_SYSCON_SBCER_I2C1_CLK_EN);
clk_register_clkdev(clk, NULL, "stu300.1");
clk = syscon_clk_register(NULL, "mmc_p_clk", "fast_clk", 0, false,
syscon_vbase + U300_SYSCON_RFR, 5,
syscon_vbase + U300_SYSCON_CEFR, 5,
U300_SYSCON_SBCER_MMC_CLK_EN);
clk_register_clkdev(clk, "apb_pclk", "mmci");
clk = syscon_clk_register(NULL, "spi_p_clk", "fast_clk", 0, false,
syscon_vbase + U300_SYSCON_RFR, 6,
syscon_vbase + U300_SYSCON_CEFR, 6,
U300_SYSCON_SBCER_SPI_CLK_EN);
/* The SPI has no external clock for the outward bus, uses the pclk */
clk_register_clkdev(clk, NULL, "pl022");
clk_register_clkdev(clk, "apb_pclk", "pl022");
/* SLOW bridge clocks */
clk = syscon_clk_register(NULL, "slow_clk", "pll13", 0, true,
syscon_vbase + U300_SYSCON_RSR, 0,
syscon_vbase + U300_SYSCON_CESR, 0,
U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN);
clk = syscon_clk_register(NULL, "uart0_clk", "slow_clk", 0, false,
syscon_vbase + U300_SYSCON_RSR, 1,
syscon_vbase + U300_SYSCON_CESR, 1,
U300_SYSCON_SBCER_UART_CLK_EN);
/* Same clock is used for APB and outward bus */
clk_register_clkdev(clk, NULL, "uart0");
clk_register_clkdev(clk, "apb_pclk", "uart0");
clk = syscon_clk_register(NULL, "gpio_clk", "slow_clk", 0, false,
syscon_vbase + U300_SYSCON_RSR, 4,
syscon_vbase + U300_SYSCON_CESR, 4,
U300_SYSCON_SBCER_GPIO_CLK_EN);
clk_register_clkdev(clk, NULL, "u300-gpio");
clk = syscon_clk_register(NULL, "keypad_clk", "slow_clk", 0, false,
syscon_vbase + U300_SYSCON_RSR, 5,
syscon_vbase + U300_SYSCON_CESR, 6,
U300_SYSCON_SBCER_KEYPAD_CLK_EN);
clk_register_clkdev(clk, NULL, "coh901461-keypad");
clk = syscon_clk_register(NULL, "rtc_clk", "slow_clk", 0, true,
syscon_vbase + U300_SYSCON_RSR, 6,
/* No clock enable register bit */
NULL, 0, 0xFFFFU);
clk_register_clkdev(clk, NULL, "rtc-coh901331");
clk = syscon_clk_register(NULL, "app_tmr_clk", "slow_clk", 0, false,
syscon_vbase + U300_SYSCON_RSR, 7,
syscon_vbase + U300_SYSCON_CESR, 7,
U300_SYSCON_SBCER_APP_TMR_CLK_EN);
clk_register_clkdev(clk, NULL, "apptimer");
clk = syscon_clk_register(NULL, "acc_tmr_clk", "slow_clk", 0, false,
syscon_vbase + U300_SYSCON_RSR, 8,
syscon_vbase + U300_SYSCON_CESR, 8,
U300_SYSCON_SBCER_ACC_TMR_CLK_EN);
clk_register_clkdev(clk, NULL, "timer");
/* Then this special MMC/SD clock */
clk = mclk_clk_register(NULL, "mmc_clk", "mmc_p_clk", false);
clk_register_clkdev(clk, NULL, "mmci");
}