linux/drivers/usb/serial/oti6858.c

1283 lines
34 KiB
C
Raw Normal View History

/*
* Ours Technology Inc. OTi-6858 USB to serial adapter driver.
*
* Copyleft (C) 2007 Kees Lemmens (adapted for kernel 2.6.20)
* Copyright (C) 2006 Tomasz Michal Lukaszewski (FIXME: add e-mail)
* Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2003 IBM Corp.
*
* Many thanks to the authors of pl2303 driver: all functions in this file
* are heavily based on pl2303 code, buffering code is a 1-to-1 copy.
*
* Warning! You use this driver on your own risk! The only official
* description of this device I have is datasheet from manufacturer,
* and it doesn't contain almost any information needed to write a driver.
* Almost all knowlegde used while writing this driver was gathered by:
* - analyzing traffic between device and the M$ Windows 2000 driver,
* - trying different bit combinations and checking pin states
* with a voltmeter,
* - receiving malformed frames and producing buffer overflows
* to learn how errors are reported,
* So, THIS CODE CAN DESTROY OTi-6858 AND ANY OTHER DEVICES, THAT ARE
* CONNECTED TO IT!
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
* TODO:
* - implement correct flushing for ioctls and oti6858_close()
* - check how errors (rx overflow, parity error, framing error) are reported
* - implement oti6858_break_ctl()
* - implement more ioctls
* - test/implement flow control
* - allow setting custom baud rates
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <asm/uaccess.h>
#include "oti6858.h"
#define OTI6858_DESCRIPTION \
"Ours Technology Inc. OTi-6858 USB to serial adapter driver"
#define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
#define OTI6858_VERSION "0.1"
static struct usb_device_id id_table [] = {
{ USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
{ }
};
MODULE_DEVICE_TABLE(usb, id_table);
static struct usb_driver oti6858_driver = {
.name = "oti6858",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
.no_dynamic_id = 1,
};
static int debug;
/* buffering code, copied from pl2303 driver */
#define PL2303_BUF_SIZE 1024
#define PL2303_TMP_BUF_SIZE 1024
struct oti6858_buf {
unsigned int buf_size;
char *buf_buf;
char *buf_get;
char *buf_put;
};
/* requests */
#define OTI6858_REQ_GET_STATUS (USB_DIR_IN | USB_TYPE_VENDOR | 0x00)
#define OTI6858_REQ_T_GET_STATUS 0x01
#define OTI6858_REQ_SET_LINE (USB_DIR_OUT | USB_TYPE_VENDOR | 0x00)
#define OTI6858_REQ_T_SET_LINE 0x00
#define OTI6858_REQ_CHECK_TXBUFF (USB_DIR_IN | USB_TYPE_VENDOR | 0x01)
#define OTI6858_REQ_T_CHECK_TXBUFF 0x00
/* format of the control packet */
struct oti6858_control_pkt {
__le16 divisor; /* baud rate = 96000000 / (16 * divisor), LE */
#define OTI6858_MAX_BAUD_RATE 3000000
u8 frame_fmt;
#define FMT_STOP_BITS_MASK 0xc0
#define FMT_STOP_BITS_1 0x00
#define FMT_STOP_BITS_2 0x40 /* 1.5 stop bits if FMT_DATA_BITS_5 */
#define FMT_PARITY_MASK 0x38
#define FMT_PARITY_NONE 0x00
#define FMT_PARITY_ODD 0x08
#define FMT_PARITY_EVEN 0x18
#define FMT_PARITY_MARK 0x28
#define FMT_PARITY_SPACE 0x38
#define FMT_DATA_BITS_MASK 0x03
#define FMT_DATA_BITS_5 0x00
#define FMT_DATA_BITS_6 0x01
#define FMT_DATA_BITS_7 0x02
#define FMT_DATA_BITS_8 0x03
u8 something; /* always equals 0x43 */
u8 control; /* settings of flow control lines */
#define CONTROL_MASK 0x0c
#define CONTROL_DTR_HIGH 0x08
#define CONTROL_RTS_HIGH 0x04
u8 tx_status;
#define TX_BUFFER_EMPTIED 0x09
u8 pin_state;
#define PIN_MASK 0x3f
#define PIN_RTS 0x20 /* output pin */
#define PIN_CTS 0x10 /* input pin, active low */
#define PIN_DSR 0x08 /* input pin, active low */
#define PIN_DTR 0x04 /* output pin */
#define PIN_RI 0x02 /* input pin, active low */
#define PIN_DCD 0x01 /* input pin, active low */
u8 rx_bytes_avail; /* number of bytes in rx buffer */;
};
#define OTI6858_CTRL_PKT_SIZE sizeof(struct oti6858_control_pkt)
#define OTI6858_CTRL_EQUALS_PENDING(a, priv) \
( ((a)->divisor == (priv)->pending_setup.divisor) \
&& ((a)->control == (priv)->pending_setup.control) \
&& ((a)->frame_fmt == (priv)->pending_setup.frame_fmt) )
/* function prototypes */
static int oti6858_open(struct usb_serial_port *port, struct file *filp);
static void oti6858_close(struct usb_serial_port *port, struct file *filp);
static void oti6858_set_termios(struct usb_serial_port *port,
struct ktermios *old);
static int oti6858_ioctl(struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg);
static void oti6858_read_int_callback(struct urb *urb);
static void oti6858_read_bulk_callback(struct urb *urb);
static void oti6858_write_bulk_callback(struct urb *urb);
static int oti6858_write(struct usb_serial_port *port,
const unsigned char *buf, int count);
static int oti6858_write_room(struct usb_serial_port *port);
static void oti6858_break_ctl(struct usb_serial_port *port, int break_state);
static int oti6858_chars_in_buffer(struct usb_serial_port *port);
static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file);
static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear);
static int oti6858_startup(struct usb_serial *serial);
static void oti6858_shutdown(struct usb_serial *serial);
/* functions operating on buffers */
static struct oti6858_buf *oti6858_buf_alloc(unsigned int size);
static void oti6858_buf_free(struct oti6858_buf *pb);
static void oti6858_buf_clear(struct oti6858_buf *pb);
static unsigned int oti6858_buf_data_avail(struct oti6858_buf *pb);
static unsigned int oti6858_buf_space_avail(struct oti6858_buf *pb);
static unsigned int oti6858_buf_put(struct oti6858_buf *pb, const char *buf,
unsigned int count);
static unsigned int oti6858_buf_get(struct oti6858_buf *pb, char *buf,
unsigned int count);
/* device info */
static struct usb_serial_driver oti6858_device = {
.driver = {
.owner = THIS_MODULE,
.name = "oti6858",
},
.id_table = id_table,
.num_ports = 1,
.open = oti6858_open,
.close = oti6858_close,
.write = oti6858_write,
.ioctl = oti6858_ioctl,
.break_ctl = oti6858_break_ctl,
.set_termios = oti6858_set_termios,
.tiocmget = oti6858_tiocmget,
.tiocmset = oti6858_tiocmset,
.read_bulk_callback = oti6858_read_bulk_callback,
.read_int_callback = oti6858_read_int_callback,
.write_bulk_callback = oti6858_write_bulk_callback,
.write_room = oti6858_write_room,
.chars_in_buffer = oti6858_chars_in_buffer,
.attach = oti6858_startup,
.shutdown = oti6858_shutdown,
};
struct oti6858_private {
spinlock_t lock;
struct oti6858_buf *buf;
struct oti6858_control_pkt status;
struct {
u8 read_urb_in_use;
u8 write_urb_in_use;
u8 termios_initialized;
} flags;
struct delayed_work delayed_write_work;
struct {
__le16 divisor;
u8 frame_fmt;
u8 control;
} pending_setup;
u8 transient;
u8 setup_done;
struct delayed_work delayed_setup_work;
wait_queue_head_t intr_wait;
struct usb_serial_port *port; /* USB port with which associated */
};
#undef dbg
/* #define dbg(format, arg...) printk(KERN_INFO "%s: " format "\n", __FILE__, ## arg) */
#define dbg(format, arg...) printk(KERN_INFO "" format "\n", ## arg)
static void setup_line(struct work_struct *work)
{
struct oti6858_private *priv = container_of(work, struct oti6858_private, delayed_setup_work.work);
struct usb_serial_port *port = priv->port;
struct oti6858_control_pkt *new_setup;
unsigned long flags;
int result;
dbg("%s(port = %d)", __func__, port->number);
if ((new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) {
dev_err(&port->dev, "%s(): out of memory!\n", __func__);
/* we will try again */
schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2));
return;
}
result = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
OTI6858_REQ_T_GET_STATUS,
OTI6858_REQ_GET_STATUS,
0, 0,
new_setup, OTI6858_CTRL_PKT_SIZE,
100);
if (result != OTI6858_CTRL_PKT_SIZE) {
dev_err(&port->dev, "%s(): error reading status\n", __func__);
kfree(new_setup);
/* we will try again */
schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2));
return;
}
spin_lock_irqsave(&priv->lock, flags);
if (!OTI6858_CTRL_EQUALS_PENDING(new_setup, priv)) {
new_setup->divisor = priv->pending_setup.divisor;
new_setup->control = priv->pending_setup.control;
new_setup->frame_fmt = priv->pending_setup.frame_fmt;
spin_unlock_irqrestore(&priv->lock, flags);
result = usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
OTI6858_REQ_T_SET_LINE,
OTI6858_REQ_SET_LINE,
0, 0,
new_setup, OTI6858_CTRL_PKT_SIZE,
100);
} else {
spin_unlock_irqrestore(&priv->lock, flags);
result = 0;
}
kfree(new_setup);
spin_lock_irqsave(&priv->lock, flags);
if (result != OTI6858_CTRL_PKT_SIZE)
priv->transient = 0;
priv->setup_done = 1;
spin_unlock_irqrestore(&priv->lock, flags);
dbg("%s(): submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
}
}
void send_data(struct work_struct *work)
{
struct oti6858_private *priv = container_of(work, struct oti6858_private, delayed_write_work.work);
struct usb_serial_port *port = priv->port;
int count = 0, result;
unsigned long flags;
unsigned char allow;
dbg("%s(port = %d)", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
if (priv->flags.write_urb_in_use) {
spin_unlock_irqrestore(&priv->lock, flags);
schedule_delayed_work(&priv->delayed_write_work, msecs_to_jiffies(2));
return;
}
priv->flags.write_urb_in_use = 1;
count = oti6858_buf_data_avail(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
if (count > port->bulk_out_size)
count = port->bulk_out_size;
if (count != 0) {
result = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
OTI6858_REQ_T_CHECK_TXBUFF,
OTI6858_REQ_CHECK_TXBUFF,
count, 0, &allow, 1, 100);
if (result != 1 || allow != 0)
count = 0;
}
if (count == 0) {
priv->flags.write_urb_in_use = 0;
dbg("%s(): submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
}
return;
}
spin_lock_irqsave(&priv->lock, flags);
oti6858_buf_get(priv->buf, port->write_urb->transfer_buffer, count);
spin_unlock_irqrestore(&priv->lock, flags);
port->write_urb->transfer_buffer_length = count;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
priv->flags.write_urb_in_use = 0;
}
usb_serial_port_softint(port);
}
static int oti6858_startup(struct usb_serial *serial)
{
struct usb_serial_port *port = serial->port[0];
struct oti6858_private *priv;
int i;
for (i = 0; i < serial->num_ports; ++i) {
priv = kzalloc(sizeof(struct oti6858_private), GFP_KERNEL);
if (!priv)
break;
priv->buf = oti6858_buf_alloc(PL2303_BUF_SIZE);
if (priv->buf == NULL) {
kfree(priv);
break;
}
spin_lock_init(&priv->lock);
init_waitqueue_head(&priv->intr_wait);
// INIT_WORK(&priv->setup_work, setup_line, serial->port[i]);
// INIT_WORK(&priv->write_work, send_data, serial->port[i]);
priv->port = port;
INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
usb_set_serial_port_data(serial->port[i], priv);
}
if (i == serial->num_ports)
return 0;
for (--i; i >= 0; --i) {
priv = usb_get_serial_port_data(serial->port[i]);
oti6858_buf_free(priv->buf);
kfree(priv);
usb_set_serial_port_data(serial->port[i], NULL);
}
return -ENOMEM;
}
static int oti6858_write(struct usb_serial_port *port,
const unsigned char *buf, int count)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
dbg("%s(port = %d, count = %d)", __func__, port->number, count);
if (!count)
return count;
spin_lock_irqsave(&priv->lock, flags);
count = oti6858_buf_put(priv->buf, buf, count);
spin_unlock_irqrestore(&priv->lock, flags);
return count;
}
static int oti6858_write_room(struct usb_serial_port *port)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
int room = 0;
unsigned long flags;
dbg("%s(port = %d)", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
room = oti6858_buf_space_avail(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
return room;
}
static int oti6858_chars_in_buffer(struct usb_serial_port *port)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
int chars = 0;
unsigned long flags;
dbg("%s(port = %d)", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
chars = oti6858_buf_data_avail(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
return chars;
}
static void oti6858_set_termios(struct usb_serial_port *port,
struct ktermios *old_termios)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int cflag;
u8 frame_fmt, control;
__le16 divisor;
int br;
dbg("%s(port = %d)", __func__, port->number);
if (!port->tty || !port->tty->termios) {
dbg("%s(): no tty structures", __func__);
return;
}
spin_lock_irqsave(&priv->lock, flags);
if (!priv->flags.termios_initialized) {
*(port->tty->termios) = tty_std_termios;
port->tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
priv->flags.termios_initialized = 1;
port->tty->termios->c_ispeed = 38400;
port->tty->termios->c_ospeed = 38400;
}
spin_unlock_irqrestore(&priv->lock, flags);
cflag = port->tty->termios->c_cflag;
spin_lock_irqsave(&priv->lock, flags);
divisor = priv->pending_setup.divisor;
frame_fmt = priv->pending_setup.frame_fmt;
control = priv->pending_setup.control;
spin_unlock_irqrestore(&priv->lock, flags);
frame_fmt &= ~FMT_DATA_BITS_MASK;
switch (cflag & CSIZE) {
case CS5:
frame_fmt |= FMT_DATA_BITS_5;
break;
case CS6:
frame_fmt |= FMT_DATA_BITS_6;
break;
case CS7:
frame_fmt |= FMT_DATA_BITS_7;
break;
default:
case CS8:
frame_fmt |= FMT_DATA_BITS_8;
break;
}
/* manufacturer claims that this device can work with baud rates
* up to 3 Mbps; I've tested it only on 115200 bps, so I can't
* guarantee that any other baud rate will work (especially
* the higher ones)
*/
br = tty_get_baud_rate(port->tty);
if (br == 0) {
divisor = 0;
} else {
int real_br;
int new_divisor;
br = min(br, OTI6858_MAX_BAUD_RATE);
new_divisor = (96000000 + 8 * br) / (16 * br);
real_br = 96000000 / (16 * new_divisor);
divisor = cpu_to_le16(new_divisor);
tty_encode_baud_rate(port->tty, real_br, real_br);
}
frame_fmt &= ~FMT_STOP_BITS_MASK;
if ((cflag & CSTOPB) != 0) {
frame_fmt |= FMT_STOP_BITS_2;
} else {
frame_fmt |= FMT_STOP_BITS_1;
}
frame_fmt &= ~FMT_PARITY_MASK;
if ((cflag & PARENB) != 0) {
if ((cflag & PARODD) != 0) {
frame_fmt |= FMT_PARITY_ODD;
} else {
frame_fmt |= FMT_PARITY_EVEN;
}
} else {
frame_fmt |= FMT_PARITY_NONE;
}
control &= ~CONTROL_MASK;
if ((cflag & CRTSCTS) != 0)
control |= (CONTROL_DTR_HIGH | CONTROL_RTS_HIGH);
/* change control lines if we are switching to or from B0 */
/* FIXME:
spin_lock_irqsave(&priv->lock, flags);
control = priv->line_control;
if ((cflag & CBAUD) == B0)
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
else
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
if (control != priv->line_control) {
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
set_control_lines(serial->dev, control);
} else {
spin_unlock_irqrestore(&priv->lock, flags);
}
*/
spin_lock_irqsave(&priv->lock, flags);
if (divisor != priv->pending_setup.divisor
|| control != priv->pending_setup.control
|| frame_fmt != priv->pending_setup.frame_fmt) {
priv->pending_setup.divisor = divisor;
priv->pending_setup.control = control;
priv->pending_setup.frame_fmt = frame_fmt;
}
spin_unlock_irqrestore(&priv->lock, flags);
}
static int oti6858_open(struct usb_serial_port *port, struct file *filp)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
struct oti6858_control_pkt *buf;
unsigned long flags;
int result;
dbg("%s(port = %d)", __func__, port->number);
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
if (port->open_count != 1)
return 0;
if ((buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) {
dev_err(&port->dev, "%s(): out of memory!\n", __func__);
return -ENOMEM;
}
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
OTI6858_REQ_T_GET_STATUS,
OTI6858_REQ_GET_STATUS,
0, 0,
buf, OTI6858_CTRL_PKT_SIZE,
100);
if (result != OTI6858_CTRL_PKT_SIZE) {
/* assume default (after power-on reset) values */
buf->divisor = cpu_to_le16(0x009c); /* 38400 bps */
buf->frame_fmt = 0x03; /* 8N1 */
buf->something = 0x43;
buf->control = 0x4c; /* DTR, RTS */
buf->tx_status = 0x00;
buf->pin_state = 0x5b; /* RTS, CTS, DSR, DTR, RI, DCD */
buf->rx_bytes_avail = 0x00;
}
spin_lock_irqsave(&priv->lock, flags);
memcpy(&priv->status, buf, OTI6858_CTRL_PKT_SIZE);
priv->pending_setup.divisor = buf->divisor;
priv->pending_setup.frame_fmt = buf->frame_fmt;
priv->pending_setup.control = buf->control;
spin_unlock_irqrestore(&priv->lock, flags);
kfree(buf);
dbg("%s(): submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
oti6858_close(port, NULL);
return -EPROTO;
}
/* setup termios */
if (port->tty)
oti6858_set_termios(port, &tmp_termios);
return 0;
}
static void oti6858_close(struct usb_serial_port *port, struct file *filp)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
long timeout;
wait_queue_t wait;
dbg("%s(port = %d)", __func__, port->number);
/* wait for data to drain from the buffer */
spin_lock_irqsave(&priv->lock, flags);
timeout = 30 * HZ; /* PL2303_CLOSING_WAIT */
init_waitqueue_entry(&wait, current);
add_wait_queue(&port->tty->write_wait, &wait);
dbg("%s(): entering wait loop", __func__);
for (;;) {
set_current_state(TASK_INTERRUPTIBLE);
if (oti6858_buf_data_avail(priv->buf) == 0
|| timeout == 0 || signal_pending(current)
|| port->serial->disconnected)
break;
spin_unlock_irqrestore(&priv->lock, flags);
timeout = schedule_timeout(timeout);
spin_lock_irqsave(&priv->lock, flags);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&port->tty->write_wait, &wait);
dbg("%s(): after wait loop", __func__);
/* clear out any remaining data in the buffer */
oti6858_buf_clear(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
/* wait for characters to drain from the device */
/* (this is long enough for the entire 256 byte */
/* pl2303 hardware buffer to drain with no flow */
/* control for data rates of 1200 bps or more, */
/* for lower rates we should really know how much */
/* data is in the buffer to compute a delay */
/* that is not unnecessarily long) */
/* FIXME
bps = tty_get_baud_rate(port->tty);
if (bps > 1200)
timeout = max((HZ*2560)/bps,HZ/10);
else
*/
timeout = 2*HZ;
schedule_timeout_interruptible(timeout);
dbg("%s(): after schedule_timeout_interruptible()", __func__);
/* cancel scheduled setup */
cancel_delayed_work(&priv->delayed_setup_work);
cancel_delayed_work(&priv->delayed_write_work);
flush_scheduled_work();
/* shutdown our urbs */
dbg("%s(): shutting down urbs", __func__);
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
/*
if (port->tty && (port->tty->termios->c_cflag) & HUPCL) {
// drop DTR and RTS
spin_lock_irqsave(&priv->lock, flags);
priv->pending_setup.control &= ~CONTROL_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
}
*/
}
static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
u8 control;
dbg("%s(port = %d, set = 0x%08x, clear = 0x%08x)",
__func__, port->number, set, clear);
if (!usb_get_intfdata(port->serial->interface))
return -ENODEV;
/* FIXME: check if this is correct (active high/low) */
spin_lock_irqsave(&priv->lock, flags);
control = priv->pending_setup.control;
if ((set & TIOCM_RTS) != 0)
control |= CONTROL_RTS_HIGH;
if ((set & TIOCM_DTR) != 0)
control |= CONTROL_DTR_HIGH;
if ((clear & TIOCM_RTS) != 0)
control &= ~CONTROL_RTS_HIGH;
if ((clear & TIOCM_DTR) != 0)
control &= ~CONTROL_DTR_HIGH;
if (control != priv->pending_setup.control) {
priv->pending_setup.control = control;
}
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned pin_state;
unsigned result = 0;
dbg("%s(port = %d)", __func__, port->number);
if (!usb_get_intfdata(port->serial->interface))
return -ENODEV;
spin_lock_irqsave(&priv->lock, flags);
pin_state = priv->status.pin_state & PIN_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
/* FIXME: check if this is correct (active high/low) */
if ((pin_state & PIN_RTS) != 0)
result |= TIOCM_RTS;
if ((pin_state & PIN_CTS) != 0)
result |= TIOCM_CTS;
if ((pin_state & PIN_DSR) != 0)
result |= TIOCM_DSR;
if ((pin_state & PIN_DTR) != 0)
result |= TIOCM_DTR;
if ((pin_state & PIN_RI) != 0)
result |= TIOCM_RI;
if ((pin_state & PIN_DCD) != 0)
result |= TIOCM_CD;
dbg("%s() = 0x%08x", __func__, result);
return result;
}
static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int prev, status;
unsigned int changed;
spin_lock_irqsave(&priv->lock, flags);
prev = priv->status.pin_state;
spin_unlock_irqrestore(&priv->lock, flags);
while (1) {
wait_event_interruptible(priv->intr_wait, priv->status.pin_state != prev);
if (signal_pending(current))
return -ERESTARTSYS;
spin_lock_irqsave(&priv->lock, flags);
status = priv->status.pin_state & PIN_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
changed = prev ^ status;
/* FIXME: check if this is correct (active high/low) */
if ( ((arg & TIOCM_RNG) && (changed & PIN_RI)) ||
((arg & TIOCM_DSR) && (changed & PIN_DSR)) ||
((arg & TIOCM_CD) && (changed & PIN_DCD)) ||
((arg & TIOCM_CTS) && (changed & PIN_CTS))) {
return 0;
}
prev = status;
}
/* NOTREACHED */
return 0;
}
static int oti6858_ioctl(struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg)
{
void __user *user_arg = (void __user *) arg;
unsigned int x;
dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)",
__func__, port->number, cmd, arg);
switch (cmd) {
case TIOCMBIS:
if (copy_from_user(&x, user_arg, sizeof(x)))
return -EFAULT;
return oti6858_tiocmset(port, NULL, x, 0);
case TIOCMBIC:
if (copy_from_user(&x, user_arg, sizeof(x)))
return -EFAULT;
return oti6858_tiocmset(port, NULL, 0, x);
case TIOCMIWAIT:
dbg("%s(): TIOCMIWAIT", __func__);
return wait_modem_info(port, arg);
default:
dbg("%s(): 0x%04x not supported", __func__, cmd);
break;
}
return -ENOIOCTLCMD;
}
static void oti6858_break_ctl(struct usb_serial_port *port, int break_state)
{
int state;
dbg("%s(port = %d)", __func__, port->number);
state = (break_state == 0) ? 0 : 1;
dbg("%s(): turning break %s", __func__, state ? "on" : "off");
/* FIXME */
/*
result = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
0, NULL, 0, 100);
if (result != 0)
dbg("%s(): error sending break", __func__);
*/
}
static void oti6858_shutdown(struct usb_serial *serial)
{
struct oti6858_private *priv;
int i;
dbg("%s()", __func__);
for (i = 0; i < serial->num_ports; ++i) {
priv = usb_get_serial_port_data(serial->port[i]);
if (priv) {
oti6858_buf_free(priv->buf);
kfree(priv);
usb_set_serial_port_data(serial->port[i], NULL);
}
}
}
static void oti6858_read_int_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct oti6858_private *priv = usb_get_serial_port_data(port);
int transient = 0, can_recv = 0, resubmit = 1;
int status = urb->status;
dbg("%s(port = %d, status = %d)",
__func__, port->number, status);
switch (status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s(): urb shutting down with status: %d",
__func__, status);
return;
default:
dbg("%s(): nonzero urb status received: %d",
__func__, status);
break;
}
if (status == 0 && urb->actual_length == OTI6858_CTRL_PKT_SIZE) {
struct oti6858_control_pkt *xs = urb->transfer_buffer;
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
if (!priv->transient) {
if (!OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
if (xs->rx_bytes_avail == 0) {
priv->transient = 4;
priv->setup_done = 0;
resubmit = 0;
dbg("%s(): scheduling setup_line()",
__func__);
schedule_delayed_work(&priv->delayed_setup_work, 0);
}
}
} else {
if (OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
priv->transient = 0;
} else if (!priv->setup_done) {
resubmit = 0;
} else if (--priv->transient == 0) {
if (xs->rx_bytes_avail == 0) {
priv->transient = 4;
priv->setup_done = 0;
resubmit = 0;
dbg("%s(): scheduling setup_line()",
__func__);
schedule_delayed_work(&priv->delayed_setup_work, 0);
}
}
}
if (!priv->transient) {
if (xs->pin_state != priv->status.pin_state)
wake_up_interruptible(&priv->intr_wait);
memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE);
}
if (!priv->transient && xs->rx_bytes_avail != 0) {
can_recv = xs->rx_bytes_avail;
priv->flags.read_urb_in_use = 1;
}
transient = priv->transient;
spin_unlock_irqrestore(&priv->lock, flags);
}
if (can_recv) {
int result;
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result != 0) {
priv->flags.read_urb_in_use = 0;
dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
" error %d\n", __func__, result);
} else {
resubmit = 0;
}
} else if (!transient) {
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
if (priv->flags.write_urb_in_use == 0
&& oti6858_buf_data_avail(priv->buf) != 0) {
schedule_delayed_work(&priv->delayed_write_work,0);
resubmit = 0;
}
spin_unlock_irqrestore(&priv->lock, flags);
}
if (resubmit) {
int result;
// dbg("%s(): submitting interrupt urb", __func__);
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&urb->dev->dev,
"%s(): usb_submit_urb() failed with"
" error %d\n", __func__, result);
}
}
}
static void oti6858_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct oti6858_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
unsigned long flags;
int status = urb->status;
int result;
dbg("%s(port = %d, status = %d)",
__func__, port->number, status);
spin_lock_irqsave(&priv->lock, flags);
priv->flags.read_urb_in_use = 0;
spin_unlock_irqrestore(&priv->lock, flags);
if (status != 0) {
if (!port->open_count) {
dbg("%s(): port is closed, exiting", __func__);
return;
}
/*
if (status == -EPROTO) {
// PL2303 mysteriously fails with -EPROTO reschedule the read
dbg("%s - caught -EPROTO, resubmitting the urb", __func__);
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
return;
}
*/
dbg("%s(): unable to handle the error, exiting", __func__);
return;
}
tty = port->tty;
if (tty != NULL && urb->actual_length > 0) {
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
// schedule the interrupt urb if we are still open */
if (port->open_count != 0) {
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
" error %d\n", __func__, result);
}
}
}
static void oti6858_write_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct oti6858_private *priv = usb_get_serial_port_data(port);
int status = urb->status;
int result;
dbg("%s(port = %d, status = %d)",
__func__, port->number, status);
switch (status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s(): urb shutting down with status: %d",
__func__, status);
priv->flags.write_urb_in_use = 0;
return;
default:
/* error in the urb, so we have to resubmit it */
dbg("%s(): nonzero write bulk status received: %d",
__func__, status);
dbg("%s(): overflow in write", __func__);
port->write_urb->transfer_buffer_length = 1;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
" error %d\n", __func__, result);
} else {
return;
}
}
priv->flags.write_urb_in_use = 0;
// schedule the interrupt urb if we are still open */
port->interrupt_in_urb->dev = port->serial->dev;
dbg("%s(): submitting interrupt urb", __func__);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): failed submitting int urb,"
" error %d\n", __func__, result);
}
}
/*
* oti6858_buf_alloc
*
* Allocate a circular buffer and all associated memory.
*/
static struct oti6858_buf *oti6858_buf_alloc(unsigned int size)
{
struct oti6858_buf *pb;
if (size == 0)
return NULL;
pb = kmalloc(sizeof(struct oti6858_buf), GFP_KERNEL);
if (pb == NULL)
return NULL;
pb->buf_buf = kmalloc(size, GFP_KERNEL);
if (pb->buf_buf == NULL) {
kfree(pb);
return NULL;
}
pb->buf_size = size;
pb->buf_get = pb->buf_put = pb->buf_buf;
return pb;
}
/*
* oti6858_buf_free
*
* Free the buffer and all associated memory.
*/
static void oti6858_buf_free(struct oti6858_buf *pb)
{
if (pb) {
kfree(pb->buf_buf);
kfree(pb);
}
}
/*
* oti6858_buf_clear
*
* Clear out all data in the circular buffer.
*/
static void oti6858_buf_clear(struct oti6858_buf *pb)
{
if (pb != NULL) {
/* equivalent to a get of all data available */
pb->buf_get = pb->buf_put;
}
}
/*
* oti6858_buf_data_avail
*
* Return the number of bytes of data available in the circular
* buffer.
*/
static unsigned int oti6858_buf_data_avail(struct oti6858_buf *pb)
{
if (pb == NULL)
return 0;
return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
}
/*
* oti6858_buf_space_avail
*
* Return the number of bytes of space available in the circular
* buffer.
*/
static unsigned int oti6858_buf_space_avail(struct oti6858_buf *pb)
{
if (pb == NULL)
return 0;
return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
}
/*
* oti6858_buf_put
*
* Copy data data from a user buffer and put it into the circular buffer.
* Restrict to the amount of space available.
*
* Return the number of bytes copied.
*/
static unsigned int oti6858_buf_put(struct oti6858_buf *pb, const char *buf,
unsigned int count)
{
unsigned int len;
if (pb == NULL)
return 0;
len = oti6858_buf_space_avail(pb);
if (count > len)
count = len;
if (count == 0)
return 0;
len = pb->buf_buf + pb->buf_size - pb->buf_put;
if (count > len) {
memcpy(pb->buf_put, buf, len);
memcpy(pb->buf_buf, buf+len, count - len);
pb->buf_put = pb->buf_buf + count - len;
} else {
memcpy(pb->buf_put, buf, count);
if (count < len)
pb->buf_put += count;
else /* count == len */
pb->buf_put = pb->buf_buf;
}
return count;
}
/*
* oti6858_buf_get
*
* Get data from the circular buffer and copy to the given buffer.
* Restrict to the amount of data available.
*
* Return the number of bytes copied.
*/
static unsigned int oti6858_buf_get(struct oti6858_buf *pb, char *buf,
unsigned int count)
{
unsigned int len;
if (pb == NULL)
return 0;
len = oti6858_buf_data_avail(pb);
if (count > len)
count = len;
if (count == 0)
return 0;
len = pb->buf_buf + pb->buf_size - pb->buf_get;
if (count > len) {
memcpy(buf, pb->buf_get, len);
memcpy(buf+len, pb->buf_buf, count - len);
pb->buf_get = pb->buf_buf + count - len;
} else {
memcpy(buf, pb->buf_get, count);
if (count < len)
pb->buf_get += count;
else /* count == len */
pb->buf_get = pb->buf_buf;
}
return count;
}
/* module description and (de)initialization */
static int __init oti6858_init(void)
{
int retval;
if ((retval = usb_serial_register(&oti6858_device)) == 0) {
if ((retval = usb_register(&oti6858_driver)) != 0)
usb_serial_deregister(&oti6858_device);
else
return 0;
}
return retval;
}
static void __exit oti6858_exit(void)
{
usb_deregister(&oti6858_driver);
usb_serial_deregister(&oti6858_device);
}
module_init(oti6858_init);
module_exit(oti6858_exit);
MODULE_DESCRIPTION(OTI6858_DESCRIPTION);
MODULE_AUTHOR(OTI6858_AUTHOR);
MODULE_VERSION(OTI6858_VERSION);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "enable debug output");